[PATCH] powerpc: Experimental support for new G5 Macs (#2)

This adds some very basic support for the new machines, including the
Quad G5 (tested), and other new dual core based machines and iMac G5
iSight (untested). This is still experimental !  There is no thermal
control yet, there is no proper handing of MSIs, etc.. but it
boots, I have all 4 cores up on my machine. Compared to the previous
version of this patch, this one adds DART IOMMU support for the U4
chipset and thus should work fine on setups with more than 2Gb of RAM.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 45 insertions, 27 deletions

diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index dbb524a851aa7..18bf3011d1e3f 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -524,18 +524,56 @@ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
 #endif	/* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */
 }
 
+static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
+						int master)
+{
+	unsigned char senses[128];
+	int offset = master ? 0 : 128;
+	int count = master ? 128 : 124;
+	const char *name = master ? " MPIC 1   " : " MPIC 2   ";
+	struct resource r;
+	struct mpic *mpic;
+	unsigned int flags = master ? MPIC_PRIMARY : 0;
+	int rc;
+
+	rc = of_address_to_resource(np, 0, &r);
+	if (rc)
+		return NULL;
+
+	pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
+
+	prom_get_irq_senses(senses, offset, offset + count);
+
+	flags |= MPIC_WANTS_RESET;
+	if (get_property(np, "big-endian", NULL))
+		flags |= MPIC_BIG_ENDIAN;
+
+	/* Primary Big Endian means HT interrupts. This is quite dodgy
+	 * but works until I find a better way
+	 */
+	if (master && (flags & MPIC_BIG_ENDIAN))
+		flags |= MPIC_BROKEN_U3;
+
+	mpic = mpic_alloc(r.start, flags, 0, offset, count, master ? 252 : 0,
+			  senses, count, name);
+	if (mpic == NULL)
+		return NULL;
+
+	mpic_init(mpic);
+
+	return mpic;
+ }
+
 static int __init pmac_pic_probe_mpic(void)
 {
 	struct mpic *mpic1, *mpic2;
 	struct device_node *np, *master = NULL, *slave = NULL;
-	unsigned char senses[128];
-	struct resource r;
 
 	/* We can have up to 2 MPICs cascaded */
 	for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
 		     != NULL;) {
 		if (master == NULL &&
-		    get_property(np, "interrupt-parent", NULL) != NULL)
+		    get_property(np, "interrupts", NULL) == NULL)
 			master = of_node_get(np);
 		else if (slave == NULL)
 			slave = of_node_get(np);
@@ -557,13 +595,8 @@ static int __init pmac_pic_probe_mpic(void)
 	ppc_md.get_irq = mpic_get_irq;
 
 	/* Setup master */
-	BUG_ON(of_address_to_resource(master, 0, &r));
-	pmac_call_feature(PMAC_FTR_ENABLE_MPIC, master, 0, 0);
-	prom_get_irq_senses(senses, 0, 128);
-	mpic1 = mpic_alloc(r.start, MPIC_PRIMARY | MPIC_WANTS_RESET,
-			   0, 0, 128, 252, senses, 128, " OpenPIC  ");
+	mpic1 = pmac_setup_one_mpic(master, 1);
 	BUG_ON(mpic1 == NULL);
-	mpic_init(mpic1);
 
 	/* Install NMI if any */
 	pmac_pic_setup_mpic_nmi(mpic1);
@@ -574,27 +607,12 @@ static int __init pmac_pic_probe_mpic(void)
 	if (slave == NULL || slave->n_intrs < 1)
 		return 0;
 
-	/* Setup slave, failures are non-fatal */
-	if (of_address_to_resource(slave, 0, &r)) {
-		printk(KERN_ERR "Can't get address of MPIC %s\n",
-		       slave->full_name);
-		return 0;
-	}
-	pmac_call_feature(PMAC_FTR_ENABLE_MPIC, slave, 0, 0);
-	prom_get_irq_senses(senses, 128, 128 + 124);
-
-	/* We don't need to set MPIC_BROKEN_U3 here since we don't have
-	 * hypertransport interrupts routed to it, at least not on currently
-	 * supported machines, that may change.
-	 */
-	mpic2 = mpic_alloc(r.start, MPIC_BIG_ENDIAN | MPIC_WANTS_RESET,
-			   0, 128, 124, 0, senses, 124, " U3-MPIC  ");
+	mpic2 = pmac_setup_one_mpic(slave, 0);
 	if (mpic2 == NULL) {
-		printk(KERN_ERR "Can't create slave MPIC %s\n",
-		       slave->full_name);
+		printk(KERN_ERR "Failed to setup slave MPIC\n");
+		of_node_put(slave);
 		return 0;
 	}
-	mpic_init(mpic2);
 	mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2);
 
 	of_node_put(slave);