Merge tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:
 "Core Framework:
   - Introduce ExpressWire library

  New Drivers:
   - Add support for ON Semiconductor NCP5623 RGB LED Driver

  New Device Support:
   - Add support for PM660L to Qualcomm's LPG driver

  New Functionality:
   - Dynamically load modules required for the default-trigger
   - Add some support for suspend and resume
   - Allow LEDs to remain lit during suspend

  Fix-ups:
   - Device Tree binding adaptions/conversions/creation
   - Fix include lists; alphabetise, remove unused, explicitly add used
   - Add new led_match_default_trigger to avoid duplication
   - Add module alias' to aid auto-loading
   - Default to hw_control if no others are specified
   - De-bloat the supported link speed attribute lists
   - Remove superfluous code and simplify overall
   - Constify some variables

  Bug Fixes:
   - Prevent kernel panic when renaming the net interface
   - Fix Kconfig related build errors
   - Ensure mutexes are unlocked prior to destroying them
   - Provide clean-up between state changes to avoid invalid state
   - Fix some broken kernel-doc headers"

* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
  leds: ncp5623: Add MS suffix to time defines
  leds: Add NCP5623 multi-led driver
  dt-bindings: leds: Add NCP5623 multi-LED Controller
  leds: mlxreg: Drop an excess struct mlxreg_led_data member
  leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
  leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
  leds: Fix ifdef check for gpio_led_register_device()
  dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
  dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
  dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
  leds: sgm3140: Add missing timer cleanup and flash gpio control
  leds: expresswire: Don't depend on NEW_LEDS
  Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
  leds: aw2013: Unlock mutex before destroying it
  leds: qcom-lpg: Add QCOM_PBS dependency
  leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
  leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  leds: qcom-lpg: Add PM660L configuration and compatible
  leds: spi-byte: Use devm_led_classdev_register_ext()
  leds: pca963x: Add support for suspend and resume
  ...

4 files changed, 216 insertions, 8 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
index a6c307c4befa09..ed46b37ab8a284 100644
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
@@ -88,6 +88,8 @@ Description:
 		speed of 10MBps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 10Mbps link speed.
+
 What:		/sys/class/leds/<led>/link_100
 Date:		Jun 2023
 KernelVersion:	6.5
@@ -101,6 +103,8 @@ Description:
 		speed of 100Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 100Mbps link speed.
+
 What:		/sys/class/leds/<led>/link_1000
 Date:		Jun 2023
 KernelVersion:	6.5
@@ -114,6 +118,8 @@ Description:
 		speed of 1000Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 1000Mbps link speed.
+
 What:		/sys/class/leds/<led>/link_2500
 Date:		Nov 2023
 KernelVersion:	6.8
@@ -127,6 +133,8 @@ Description:
 		speed of 2500Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 2500Mbps link speed.
+
 What:		/sys/class/leds/<led>/link_5000
 Date:		Nov 2023
 KernelVersion:	6.8
@@ -140,6 +148,8 @@ Description:
 		speed of 5000Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 5000Mbps link speed.
+
 What:		/sys/class/leds/<led>/link_10000
 Date:		Nov 2023
 KernelVersion:	6.8
@@ -153,6 +163,8 @@ Description:
 		speed of 10000Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+		Present only if the named network device supports 10000Mbps link speed.
+
 What:		/sys/class/leds/<led>/half_duplex
 Date:		Jun 2023
 KernelVersion:	6.5
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty
index 30cef9ac0f493a..308fbc3627cd1a 100644
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-tty
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty
@@ -1,11 +1,11 @@
-What:		/sys/class/leds/<led>/ttyname
+What:		/sys/class/leds/<tty_led>/ttyname
 Date:		Dec 2020
 KernelVersion:	5.10
 Contact:	linux-leds@vger.kernel.org
 Description:
 		Specifies the tty device name of the triggering tty
 
-What:		/sys/class/leds/<led>/rx
+What:		/sys/class/leds/<tty_led>/rx
 Date:		February 2024
 KernelVersion:	6.8
 Description:
@@ -13,7 +13,7 @@ Description:
 		If set to 0, the LED will not blink on reception.
 		If set to 1 (default), the LED will blink on reception.
 
-What:		/sys/class/leds/<led>/tx
+What:		/sys/class/leds/<tty_led>/tx
 Date:		February 2024
 KernelVersion:	6.8
 Description:
@@ -21,7 +21,7 @@ Description:
 		If set to 0, the LED will not blink on transmission.
 		If set to 1 (default), the LED will blink on transmission.
 
-What:		/sys/class/leds/<led>/cts
+What:		/sys/class/leds/<tty_led>/cts
 Date:		February 2024
 KernelVersion:	6.8
 Description:
@@ -31,7 +31,7 @@ Description:
 		If set to 0 (default), the LED will not evaluate CTS.
 		If set to 1, the LED will evaluate CTS.
 
-What:		/sys/class/leds/<led>/dsr
+What:		/sys/class/leds/<tty_led>/dsr
 Date:		February 2024
 KernelVersion:	6.8
 Description:
@@ -41,7 +41,7 @@ Description:
 		If set to 0 (default), the LED will not evaluate DSR.
 		If set to 1, the LED will evaluate DSR.
 
-What:		/sys/class/leds/<led>/dcd
+What:		/sys/class/leds/<tty_led>/dcd
 Date:		February 2024
 KernelVersion:	6.8
 Description:
@@ -51,7 +51,7 @@ Description:
 		If set to 0 (default), the LED will not evaluate CAR (DCD).
 		If set to 1, the LED will evaluate CAR (DCD).
 
-What:		/sys/class/leds/<led>/rng
+What:		/sys/class/leds/<tty_led>/rng
 Date:		February 2024
 KernelVersion:	6.8
 Description:
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
index ea84ad426df18e..54a428d3d46ffe 100644
--- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: >
   The Qualcomm Light Pulse Generator consists of three different hardware blocks;
-  a ramp generator with lookup table, the light pulse generator and a three
+  a ramp generator with lookup table (LUT), the light pulse generator and a three
   channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
 
 properties:
@@ -63,6 +63,29 @@ properties:
         - description: dtest line to attach
         - description: flags for the attachment
 
+  nvmem:
+    description: >
+      This property is required for PMICs that supports PPG, which is when a
+      PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead
+      of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data
+      and pattern LUT is separated into 2 SDAM modules. In that case, phandles
+      to both SDAM modules need to be specified.
+    minItems: 1
+    maxItems: 2
+
+  nvmem-names:
+    minItems: 1
+    items:
+      - const: lpg_chan_sdam
+      - const: lut_sdam
+
+  qcom,pbs:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the Qualcomm Programmable Boot Sequencer node (PBS).
+      PBS node is used to trigger LPG pattern sequences for PMICs that support
+      single SDAM PPG.
+
   multi-led:
     type: object
     $ref: leds-class-multicolor.yaml#
@@ -106,6 +129,52 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-lpg
+              - qcom,pm8150b-lpg
+              - qcom,pm8150l-lpg
+              - qcom,pm8916-pwm
+              - qcom,pm8941-lpg
+              - qcom,pm8994-lpg
+              - qcom,pmc8180c-lpg
+              - qcom,pmi8994-lpg
+              - qcom,pmi8998-lpg
+              - qcom,pmk8550-pwm
+    then:
+      properties:
+        nvmem: false
+        nvmem-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmi632-lpg
+    then:
+      properties:
+        nvmem:
+          maxItems: 1
+        nvmem-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8350c-pwm
+    then:
+      properties:
+        nvmem:
+          minItems: 2
+        nvmem-names:
+          minItems: 2
+
 examples:
   - |
     #include <dt-bindings/leds/common.h>
@@ -191,4 +260,35 @@ examples:
       compatible = "qcom,pm8916-pwm";
       #pwm-cells = <2>;
     };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi632-lpg";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #pwm-cells = <2>;
+      nvmem-names = "lpg_chan_sdam";
+      nvmem = <&pmi632_sdam_7>;
+      qcom,pbs = <&pmi632_pbs_client3>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_RED>;
+        label = "red";
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        label = "green";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_BLUE>;
+        label = "blue";
+      };
+    };
+
 ...
diff --git a/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml b/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml
new file mode 100644
index 00000000000000..9c9f3a682ba209
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/onnn,ncp5623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor NCP5623 multi-LED Driver
+
+maintainers:
+  - Abdel Alkuor <alkuor@gmail.com>
+
+description:
+  NCP5623 Triple Output I2C Controlled LED Driver.
+  https://www.onsemi.com/pdf/datasheet/ncp5623-d.pdf
+
+properties:
+  compatible:
+    enum:
+      - onnn,ncp5623
+
+  reg:
+    const: 0x38
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 2
+
+        required:
+          - reg
+          - color
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - multi-led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@38 {
+            compatible = "onnn,ncp5623";
+            reg = <0x38>;
+
+            multi-led {
+                color = <LED_COLOR_ID_RGB>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                    reg = <2>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+        };
+    };