Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial

9 files changed, 10 insertions, 10 deletions

diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl
index 3ec6c875588ab..fdff984a51618 100644
--- a/Documentation/DocBook/videobook.tmpl
+++ b/Documentation/DocBook/videobook.tmpl
@@ -229,7 +229,7 @@ int __init myradio_init(struct video_init *v)
 
 static int users = 0;
 
-static int radio_open(stuct video_device *dev, int flags)
+static int radio_open(struct video_device *dev, int flags)
 {
         if(users)
                 return -EBUSY;
@@ -949,7 +949,7 @@ int __init mycamera_init(struct video_init *v)
 
 static int users = 0;
 
-static int camera_open(stuct video_device *dev, int flags)
+static int camera_open(struct video_device *dev, int flags)
 {
         if(users)
                 return -EBUSY;
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index 7eb715e07eda0..4ae418889b881 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -136,7 +136,7 @@ changes occur:
 8) void lazy_mmu_prot_update(pte_t pte)
 	This interface is called whenever the protection on
 	any user PTEs change.  This interface provides a notification
-	to architecture specific code to take appropiate action.
+	to architecture specific code to take appropriate action.
 
 
 Next, we have the cache flushing interfaces.  In general, when Linux
diff --git a/Documentation/hpet.txt b/Documentation/hpet.txt
index e52457581f47e..b7a3dc38dd524 100644
--- a/Documentation/hpet.txt
+++ b/Documentation/hpet.txt
@@ -2,7 +2,7 @@
 
 The High Precision Event Timer (HPET) hardware is the future replacement
 for the 8254 and Real Time Clock (RTC) periodic timer functionality.
-Each HPET can have up two 32 timers.  It is possible to configure the
+Each HPET can have up to 32 timers.  It is possible to configure the
 first two timers as legacy replacements for 8254 and RTC periodic timers.
 A specification done by Intel and Microsoft can be found at
 <http://www.intel.com/hardwaredesign/hpetspec.htm>.
diff --git a/Documentation/input/ff.txt b/Documentation/input/ff.txt
index efa7dd6751f3b..c7e10eaff203c 100644
--- a/Documentation/input/ff.txt
+++ b/Documentation/input/ff.txt
@@ -120,7 +120,7 @@ to the unique id assigned by the driver. This data is required for performing
 some operations (removing an effect, controlling the playback).
 This if field must be set to -1 by the user in order to tell the driver to
 allocate a new effect.
-See <linux/input.h> for a description of the ff_effect stuct. You should also
+See <linux/input.h> for a description of the ff_effect struct. You should also
 find help in a few sketches, contained in files shape.fig and interactive.fig.
 You need xfig to visualize these files.
 
diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt
index 9a7aea0636a53..11c9be49f37ca 100644
--- a/Documentation/ioctl/hdio.txt
+++ b/Documentation/ioctl/hdio.txt
@@ -946,7 +946,7 @@ HDIO_SCAN_HWIF			register and (re)scan interface
 
 	  This ioctl initializes the addresses and irq for a disk
 	  controller, probes for drives, and creates /proc/ide
-	  interfaces as appropiate.
+	  interfaces as appropriate.
 
 
 
diff --git a/Documentation/laptop-mode.txt b/Documentation/laptop-mode.txt
index f42e4c089356c..b18e216759060 100644
--- a/Documentation/laptop-mode.txt
+++ b/Documentation/laptop-mode.txt
@@ -357,7 +357,7 @@ MAX_AGE=${MAX_AGE:-'600'}
 # Read-ahead, in kilobytes
 READAHEAD=${READAHEAD:-'4096'}
 
-# Shall we remount journaled fs. with appropiate commit interval? (1=yes)
+# Shall we remount journaled fs. with appropriate commit interval? (1=yes)
 DO_REMOUNTS=${DO_REMOUNTS:-'1'}
 
 # And shall we add the "noatime" option to that as well? (1=yes)
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
index f9d979ee95268..7837c53fd5fee 100644
--- a/Documentation/networking/sk98lin.txt
+++ b/Documentation/networking/sk98lin.txt
@@ -91,7 +91,7 @@ To use the driver as a module, proceed as follows:
    with (M)
 5. Execute the command "make modules".
 6. Execute the command "make modules_install".
-   The appropiate modules will be installed.
+   The appropriate modules will be installed.
 7. Reboot your system.
 
 
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 4963d83d15118..e651ed8d1e6f4 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -5577,7 +5577,7 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  static int mychip_suspend(strut pci_dev *pci, pm_message_t state)
+  static int mychip_suspend(struct pci_dev *pci, pm_message_t state)
   {
           /* (1) */
           struct snd_card *card = pci_get_drvdata(pci);
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 72ab9b99b22c8..9c5fc15d03d14 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -198,6 +198,6 @@ Debugging
 
 Misc
 
-  noreplacement  Don't replace instructions with more appropiate ones
+  noreplacement  Don't replace instructions with more appropriate ones
 		 for the CPU. This may be useful on asymmetric MP systems
 		 where some CPU have less capabilities than the others.