Merge tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - Amphenol ChipCap 2
   - ASPEED g6 PWM/Fan tach
   - Astera Labs PT5161L retimer
   - ASUS ROG RYUJIN II 360 AIO cooler
   - LTC4282
   - Microsoft Surface devices
   - MPS MPQ8785 Synchronous Step-Down Converter
   - NZXT Kraken X and Z series AIO CPU coolers

  Additional chip support in existing drivers:
   - Ayaneo Air Plus 7320u (oxp-sensors)
   - INA260 (ina2xx)
   - XPS 9315 (dell-smm)
   - MSI customer ID (nct6683)

  Devicetree bindings updates:
   - Common schema for hardware monitoring devices
   - Common schema for fans
   - Update chip descriptions to use common schema
   - Document regulator properties in several drivers
   - Explicit bindings for infineon buck converters

  Other improvements:
   - Replaced rbtree with maple tree register cache in several drivers
   - Added support for humidity min/max alarm and volatage fault
     attributes to hwmon core
   - Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
     detect()
   - Dropped obsolete and redundant entried from MAINTAINERS
   - Cleaned up axi-fan-control and coretemp drivers
   - Minor fixes and improvements in several other drivers"

* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
  hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
  hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
  dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
  dt-bindings: hwmon: fan: Add fan binding to schema
  dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
  hwmon: (amc6821) add of_match table
  dt-bindings: hwmon: lm75: use common hwmon schema
  hwmon: (sis5595) drop unused DIV_TO_REG function
  dt-bindings: hwmon: reference common hwmon schema
  dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
  dt-bindings: hwmon: adi,adm1275: use common hwmon schema
  dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
  dt-bindings: hwmon: add common properties
  hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
  hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
  hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
  regulator: dt-bindings: promote infineon buck converters to their own binding
  dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
  dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
  MAINTAINERS: Drop redundant hwmon entries
  ...

35 files changed, 1104 insertions, 28 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon
index 3dac923c9b0ef0..cfd0d0bab48398 100644
--- a/Documentation/ABI/testing/sysfs-class-hwmon
+++ b/Documentation/ABI/testing/sysfs-class-hwmon
@@ -149,6 +149,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/inY_fault
+Description:
+		Reports a voltage hard failure (eg: shorted component)
+
+		- 1: Failed
+		- 0: Ok
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/cpuY_vid
 Description:
 		CPU core reference voltage.
@@ -968,6 +977,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/humidityY_max_alarm
+Description:
+		Maximum humidity detection
+
+		- 0: OK
+		- 1: Maximum humidity detected
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/humidityY_max_hyst
 Description:
 		Humidity hysteresis value for max limit.
@@ -987,6 +1005,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/humidityY_min_alarm
+Description:
+		Minimum humidity detection
+
+		- 0: OK
+		- 1: Minimum humidity detected
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/humidityY_min_hyst
 Description:
 		Humidity hysteresis value for min limit.
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
index 2e45364d05438d..be7e9e91a3a8c3 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -46,7 +46,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
index ab87f51c5aefe8..b680612949642f 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -33,10 +33,6 @@ properties:
   reg:
     maxItems: 1
 
-  shunt-resistor-micro-ohms:
-    description:
-      Shunt resistor value in micro-Ohm.
-
   adi,volt-curr-sample-average:
     description: |
       Number of samples to be used to report voltage and current values.
@@ -50,6 +46,7 @@ properties:
     enum: [1, 2, 4, 8, 16, 32, 64, 128]
 
 allOf:
+  - $ref: hwmon-common.yaml#
   - if:
       properties:
         compatible:
@@ -107,7 +104,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
index 5cb66e97e816c6..6401b0a9aff4d2 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
@@ -31,7 +31,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml
new file mode 100644
index 00000000000000..4854b95a93e341
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc4282.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc4282
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  adi,rsense-nano-ohms:
+    description: Value of the sense resistor.
+
+  adi,vin-mode-microvolt:
+    description:
+      Selects operating range for the Undervoltage, Overvoltage and Foldback
+      pins. Also for the ADC. Should be set to the nominal input voltage.
+    enum: [3300000, 5000000, 12000000, 24000000]
+    default: 12000000
+
+  adi,fet-bad-timeout-ms:
+    description:
+      From the moment a FET bad conditions is present, this property selects the
+      wait time/timeout for a FET-bad fault to be signaled. Setting this to 0,
+      disables FET bad faults to be reported.
+    default: 255
+    maximum: 255
+
+  adi,overvoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,undervoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,current-limit-sense-microvolt:
+    description:
+      The current limit sense voltage of the chip is adjustable between
+      12.5mV and 34.4mV in 3.1mV steps. This effectively limits the current
+      on the load.
+    enum: [12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375]
+    default: 25000
+
+  adi,overcurrent-retry:
+    description:
+      If set, enables the chip to auto-retry 256 timer cycles after an
+      Overcurrent fault.
+    type: boolean
+
+  adi,overvoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Overvoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,undervoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Undervoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,fault-log-enable:
+    description:
+      If set, enables the FAULT_LOG and ADC_ALERT_LOG registers to be written
+      to the EEPROM when a fault bit transitions high and hence, will be
+      available after a power cycle (the chip loads the contents of
+      the EE_FAULT_LOG register - the one in EEPROM - into FAULT_LOG at boot).
+    type: boolean
+
+  adi,gpio1-mode:
+    description: Defines the function of the Pin. It can indicate that power is
+      good (PULL the pin low when power is not good) or that power is bad (Go
+      into high-z when power is not good).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [power_bad, power_good]
+    default: power_good
+
+  adi,gpio2-mode:
+    description: Defines the function of the Pin. It can be set as the input for
+      the ADC or indicating that the MOSFET is in stress (dissipating power).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [adc_input, stress_fet]
+    default: adc_input
+
+  adi,gpio3-monitor-enable:
+    description: If set, gpio3 is set as input for the ADC instead of gpio2.
+    type: boolean
+
+allOf:
+  - if:
+      required:
+        - adi,gpio3-monitor-enable
+    then:
+      properties:
+        adi,gpio2-mode:
+          const: stress_fet
+
+required:
+  - compatible
+  - reg
+  - adi,rsense-nano-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@50 {
+            compatible = "adi,ltc4282";
+            reg = <0x50>;
+            adi,rsense-nano-ohms = <500>;
+
+            adi,gpio1-mode = "power_good";
+            adi,gpio2-mode = "adc_input";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml b/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
new file mode 100644
index 00000000000000..17351fdbefce6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amphenol,chipcap2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipCap 2 humidity and temperature iio sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  Relative humidity and temperature sensor on I2C bus.
+
+  Datasheets:
+    https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
+
+properties:
+  compatible:
+    oneOf:
+      - const: amphenol,cc2d23
+      - items:
+          - enum:
+              - amphenol,cc2d23s
+              - amphenol,cc2d25
+              - amphenol,cc2d25s
+              - amphenol,cc2d33
+              - amphenol,cc2d33s
+              - amphenol,cc2d35
+              - amphenol,cc2d35s
+          - const: amphenol,cc2d23
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: measurement ready indicator
+      - description: low humidity alarm
+      - description: high humidity alarm
+
+  interrupt-names:
+    items:
+      - const: ready
+      - const: low
+      - const: high
+
+  vdd-supply:
+    description:
+      Dedicated, controllable supply-regulator to reset the device and
+      enter in command mode.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity@28 {
+            compatible = "amphenol,cc2d23s", "amphenol,cc2d23";
+            reg = <0x28>;
+            interrupt-parent = <&gpio>;
+            interrupts = <4 IRQ_TYPE_EDGE_RISING>,
+                         <5 IRQ_TYPE_EDGE_RISING>,
+                         <6 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "ready", "low", "high";
+            vdd-supply = <&reg_vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
new file mode 100644
index 00000000000000..9e5ed901ae54c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2023 Aspeed, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED G6 PWM and Fan Tach controller
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  The ASPEED PWM controller can support up to 16 PWM outputs.
+  The ASPEED Fan Tacho controller can support up to 16 fan tach input.
+  They are independent hardware blocks, which are different from the
+  previous version of the ASPEED chip.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-pwm-tach
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+patternProperties:
+  "^fan-[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+    required:
+      - tach-ch
+
+required:
+  - reg
+  - clocks
+  - resets
+  - "#pwm-cells"
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    pwm_tach: pwm-tach-controller@1e610000 {
+      compatible = "aspeed,ast2600-pwm-tach";
+      reg = <0x1e610000 0x100>;
+      clocks = <&syscon ASPEED_CLK_AHB>;
+      resets = <&syscon ASPEED_RESET_PWM>;
+      #pwm-cells = <3>;
+
+      fan-0 {
+        tach-ch = /bits/ 8 <0x0>;
+        pwms = <&pwm_tach 0 40000 0>;
+      };
+
+      fan-1 {
+        tach-ch = /bits/ 8 <0x1 0x2>;
+        pwms = <&pwm_tach 1 40000 0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/fan-common.yaml b/Documentation/devicetree/bindings/hwmon/fan-common.yaml
new file mode 100644
index 00000000000000..0fb7380816994d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/fan-common.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/fan-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Fan Properties
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+properties:
+  max-rpm:
+    description:
+      Max RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 100000
+
+  min-rpm:
+    description:
+      Min RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1000
+
+  pulses-per-revolution:
+    description:
+      The number of pulse from fan sensor per revolution.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4
+
+  tach-div:
+    description:
+      Divisor for the tach sampling clock, which determines the sensitivity of the tach pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  target-rpm:
+    description:
+      The default desired fan speed in RPM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  fan-driving-mode:
+    description:
+      Select the driving mode of the fan.(DC, PWM and so on)
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ dc, pwm ]
+
+  pwms:
+    description:
+      PWM provider.
+    maxItems: 1
+
+  "#cooling-cells":
+    const: 2
+
+  cooling-levels:
+    description:
+      The control value which correspond to thermal cooling states.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  tach-ch:
+    description:
+      The tach channel used for the fan.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  label:
+    description:
+      Optional fan label
+
+  fan-supply:
+    description:
+      Power supply for fan.
+
+  reg:
+    maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml b/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml
new file mode 100644
index 00000000000000..dc86b5c72cf22c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/hwmon-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware Monitoring Devices Common Properties
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  label:
+    description: A descriptive name for this device.
+
+  shunt-resistor-micro-ohms:
+    description: The value of current sense resistor.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
index e62aff670478c4..8f0095bb7f6eb2 100644
--- a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
@@ -25,7 +25,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
index 98ca163d348688..853df9fef6c83e 100644
--- a/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
@@ -25,15 +25,14 @@ properties:
       The default is 102.4 volts.
     type: boolean
 
-  shunt-resistor-micro-ohms:
-    description:
-      Resistor value micro-ohms.
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
index ed269e428a3d93..29bd7460cc268b 100644
--- a/Documentation/devicetree/bindings/hwmon/lm75.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -57,6 +57,7 @@ required:
   - reg
 
 allOf:
+  - $ref: hwmon-common.yaml#
   - if:
       not:
         properties:
@@ -71,7 +72,7 @@ allOf:
       properties:
         interrupts: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
index 358b262431fc57..e3db642878d403 100644
--- a/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
@@ -25,6 +25,7 @@ properties:
       - nuvoton,nct6796
       - nuvoton,nct6797
       - nuvoton,nct6798
+      - nuvoton,nct6799
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
index ded1c115764b67..5c4e52b472ad17 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
@@ -30,6 +30,23 @@ properties:
       unconnected(has internal pull-down).
     type: boolean
 
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -38,6 +55,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -45,5 +63,15 @@ examples:
         tda38640@40 {
             compatible = "infineon,tda38640";
             reg = <0x40>;
+
+            interrupt-parent = <&smb_pex_cpu0_event>;
+            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                pvnn_main_cpu0: vout {
+                    regulator-name = "pvnn_main_cpu0";
+                    regulator-enable-ramp-delay = <200>;
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
index da8292bc32f517..a20f140dc79a66 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
@@ -34,11 +34,26 @@ properties:
       Shunt (sense) resistor value in micro-Ohms
     default: 1000
 
+  regulators:
+    type: object
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/hwmon/hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
index 378d1f6aeeb3f5..df86c2c9203753 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
@@ -28,10 +28,14 @@ properties:
       - ti,ina231
       - ti,ina237
       - ti,ina238
+      - ti,ina260
 
   reg:
     maxItems: 1
 
+  "#io-channel-cells":
+    const: 1
+
   shunt-resistor:
     description:
       Shunt resistor value in micro-Ohm.
@@ -66,7 +70,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -77,6 +84,8 @@ examples:
         power-sensor@44 {
             compatible = "ti,ina220";
             reg = <0x44>;
+            #io-channel-cells = <1>;
+            label = "vdd_3v0";
             shunt-resistor = <1000>;
             vs-supply = <&vdd_3v0>;
         };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index cdd1489e0c54c1..227858e7605876 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -72,7 +72,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
index ebc8d466c1aaba..f58248c29e22cc 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
@@ -35,7 +35,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml b/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml
new file mode 100644
index 00000000000000..e6ffbc2a229884
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon Buck Regulators with PMBUS interfaces
+
+maintainers:
+  - Not Me.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - infineon,ir38060
+      - infineon,ir38064
+      - infineon,ir38164
+      - infineon,ir38263
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@34 {
+        compatible = "infineon,ir38060";
+        reg = <0x34>;
+
+        regulator-min-microvolt = <437500>;
+        regulator-max-microvolt = <1387500>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 79dcd92c4a4345..2210964faaf69b 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -47,6 +47,8 @@ properties:
           - adi,lt7182s
             # AMS iAQ-Core VOC Sensor
           - ams,iaq-core
+            # Temperature monitoring of Astera Labs PT5161L PCIe retimer
+          - asteralabs,pt5161l
             # i2c serial eeprom (24cxx)
           - at,24c08
             # ATSHA204 - i2c h/w symmetric crypto module
@@ -129,6 +131,8 @@ properties:
           - mps,mp2975
             # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
           - mps,mp5990
+            # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
+          - mps,mpq8785
             # Honeywell Humidicon HIH-6130 humidity/temperature sensor
           - honeywell,hi6130
             # IBM Common Form Factor Power Supply Versions (all versions)
@@ -139,14 +143,6 @@ properties:
           - ibm,cffps2
             # Infineon IR36021 digital POL buck controller
           - infineon,ir36021
-            # Infineon IR38060 Voltage Regulator
-          - infineon,ir38060
-            # Infineon IR38064 Voltage Regulator
-          - infineon,ir38064
-            # Infineon IR38164 Voltage Regulator
-          - infineon,ir38164
-            # Infineon IR38263 Voltage Regulator
-          - infineon,ir38263
             # Infineon IRPS5401 Voltage Regulator (PMIC)
           - infineon,irps5401
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index d371eb57216453..6af0014835dd8e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -109,6 +109,8 @@ patternProperties:
     description: Amlogic, Inc.
   "^ampere,.*":
     description: Ampere Computing LLC
+  "^amphenol,.*":
+    description: Amphenol Advanced Sensors
   "^ampire,.*":
     description: Ampire Co., Ltd.
   "^ams,.*":
@@ -161,6 +163,8 @@ patternProperties:
     description: ASPEED Technology Inc.
   "^asrock,.*":
     description: ASRock Inc.
+  "^asteralabs,.*":
+    description: Astera Labs, Inc.
   "^asus,.*":
     description: AsusTek Computer Inc.
   "^atheros,.*":
diff --git a/Documentation/hwmon/aspeed-g6-pwm-tach.rst b/Documentation/hwmon/aspeed-g6-pwm-tach.rst
new file mode 100644
index 00000000000000..17398fe397fe93
--- /dev/null
+++ b/Documentation/hwmon/aspeed-g6-pwm-tach.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver aspeed-g6-pwm-tach
+=================================
+
+Supported chips:
+	ASPEED AST2600
+
+Authors:
+	<billy_tsai@aspeedtech.com>
+
+Description:
+------------
+This driver implements support for ASPEED AST2600 Fan Tacho controller.
+The controller supports up to 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+
+=============== ======= ======================================================
+fanX_input	ro	provide current fan rotation value in RPM as reported
+			by the fan to the device.
+fanX_div	rw	Fan divisor: Supported value are power of 4 (1, 4, 16
+                        64, ... 4194304)
+                        The larger divisor, the less rpm accuracy and the less
+                        affected by fan signal glitch.
+=============== ======= ======================================================
diff --git a/Documentation/hwmon/asus_rog_ryujin.rst b/Documentation/hwmon/asus_rog_ryujin.rst
new file mode 100644
index 00000000000000..9f77da07002218
--- /dev/null
+++ b/Documentation/hwmon/asus_rog_ryujin.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_rog_ryujin
+=============================
+
+Supported devices:
+
+* ASUS ROG RYUJIN II 360
+
+Author: Aleksa Savic
+
+Description
+-----------
+
+This driver enables hardware monitoring support for the listed ASUS ROG RYUJIN
+all-in-one CPU liquid coolers. Available sensors are pump, internal and external
+(controller) fan speed in RPM, their duties in PWM, as well as coolant temperature.
+
+Attaching external fans to the controller is optional and allows them to be
+controlled from the device. If not connected, the fan-related sensors will
+report zeroes. The controller is a separate hardware unit that comes bundled
+with the AIO and connects to it to allow fan control.
+
+The addressable LCD screen is not supported in this driver and should
+be controlled through userspace tools.
+
+Usage notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Sysfs entries
+-------------
+
+=========== =============================================
+fan1_input  Pump speed (in rpm)
+fan2_input  Internal fan speed (in rpm)
+fan3_input  External (controller) fan 1 speed (in rpm)
+fan4_input  External (controller) fan 2 speed (in rpm)
+fan5_input  External (controller) fan 3 speed (in rpm)
+fan6_input  External (controller) fan 4 speed (in rpm)
+temp1_input Coolant temperature (in millidegrees Celsius)
+pwm1        Pump duty
+pwm2        Internal fan duty
+pwm3        External (controller) fan duty
+=========== =============================================
diff --git a/Documentation/hwmon/chipcap2.rst b/Documentation/hwmon/chipcap2.rst
new file mode 100644
index 00000000000000..dc165becc64cff
--- /dev/null
+++ b/Documentation/hwmon/chipcap2.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver ChipCap2
+======================
+
+Supported chips:
+
+  * Amphenol CC2D23, CC2D23S, CC2D25, CC2D25S, CC2D33, CC2D33S, CC2D35, CC2D35S
+
+    Prefix: 'chipcap2'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
+
+Author:
+
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+Description
+-----------
+
+This driver implements support for the Amphenol ChipCap 2, a humidity and
+temperature chip family. Temperature is measured in milli degrees celsius,
+relative humidity is expressed as a per cent mille. The measurement ranges
+are the following:
+
+  - Relative humidity: 0 to 100000 pcm (14-bit resolution)
+  - Temperature: -40000 to +125000 m°C (14-bit resolution)
+
+The device communicates with the I2C protocol and uses the I2C address 0x28
+by default.
+
+Depending on the hardware configuration, up to two humidity alarms to control
+minimum and maximum values are provided. Their thresholds and hystersis can be
+configured via sysfs.
+
+Thresholds and hysteris must be provided as a per cent mille. These values
+might be truncated to match the 14-bit device resolution (6.1 pcm/LSB)
+
+Known Issues
+------------
+
+The driver does not support I2C address and command window length modification.
+
+sysfs-Interface
+---------------
+
+The following list includes the sysfs attributes that the driver always provides,
+their permissions and a short description:
+
+=============================== ======= ========================================
+Name                            Perm    Description
+=============================== ======= ========================================
+temp1_input:                    RO      temperature input
+humidity1_input:                RO      humidity input
+=============================== ======= ========================================
+
+The following list includes the sysfs attributes that the driver may provide
+depending on the hardware configuration:
+
+=============================== ======= ========================================
+Name                            Perm    Description
+=============================== ======= ========================================
+humidity1_min:                  RW      humidity low limit. Measurements under
+                                        this limit trigger a humidity low alarm
+humidity1_max:                  RW      humidity high limit. Measurements above
+                                        this limit trigger a humidity high alarm
+humidity1_min_hyst:             RW      humidity low hystersis
+humidity1_max_hyst:             RW      humidity high hystersis
+humidity1_min_alarm:            RO      humidity low alarm indicator
+humidity1_max_alarm:            RO      humidity high alarm indicator
+=============================== ======= ========================================
diff --git a/Documentation/hwmon/emc2305.rst b/Documentation/hwmon/emc2305.rst
index 2403dbaf272891..d0bfffe463587b 100644
--- a/Documentation/hwmon/emc2305.rst
+++ b/Documentation/hwmon/emc2305.rst
@@ -6,7 +6,6 @@ Kernel driver emc2305
 Supported chips:
    Microchip EMC2305, EMC2303, EMC2302, EMC2301
 
-   Addresses scanned: I2C 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d
    Prefixes: 'emc2305'
 
    Datasheet: Publicly available at the Microchip website :
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index c7ed1f73ac0661..1ca7a4fe1f8f57 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -44,13 +44,16 @@ Hardware Monitoring Kernel Drivers
    aquacomputer_d5next
    asb100
    asc7621
+   aspeed-g6-pwm-tach
    aspeed-pwm-tacho
    asus_ec_sensors
+   asus_rog_ryujin
    asus_wmi_sensors
    bcm54140
    bel-pfe
    bpa-rs600
    bt1-pvt
+   chipcap2
    coretemp
    corsair-cpro
    corsair-psu
@@ -129,6 +132,7 @@ Hardware Monitoring Kernel Drivers
    ltc4245
    ltc4260
    ltc4261
+   ltc4282
    ltc4286
    max127
    max15301
@@ -163,6 +167,7 @@ Hardware Monitoring Kernel Drivers
    mp2975
    mp5023
    mp5990
+   mpq8785
    nct6683
    nct6775
    nct7802
@@ -171,6 +176,7 @@ Hardware Monitoring Kernel Drivers
    nsa320
    ntc_thermistor
    nzxt-kraken2
+   nzxt-kraken3
    nzxt-smart2
    occ
    oxp-sensors
@@ -185,6 +191,7 @@ Hardware Monitoring Kernel Drivers
    pmbus
    powerz
    powr1220
+   pt5161l
    pxe1610
    pwm-fan
    q54sj108a2
@@ -208,6 +215,7 @@ Hardware Monitoring Kernel Drivers
    smsc47m1
    sparx5-temp
    stpddc60
+   surface_fan
    sy7636a-hwmon
    tc654
    tc74
diff --git a/Documentation/hwmon/ltc4282.rst b/Documentation/hwmon/ltc4282.rst
new file mode 100644
index 00000000000000..a87ec3564998fe
--- /dev/null
+++ b/Documentation/hwmon/ltc4282.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel drivers ltc4282
+==========================================
+
+Supported chips:
+
+  * Analog Devices LTC4282
+
+    Prefix: 'ltc4282'
+
+    Addresses scanned: - I2C 0x40 - 0x5A (7-bit)
+    Addresses scanned: - I2C 0x80 - 0xB4 with a step of 2 (8-bit)
+
+    Datasheet:
+
+        https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
+
+Author: Nuno Sá <nuno.sa@analog.com>
+
+Description
+___________
+
+The LTC4282 hot swap controller allows a board to be safely inserted and removed
+from a live backplane. Using one or more external N-channel pass transistors,
+board supply voltage and inrush current are ramped up at an adjustable rate. An
+I2C interface and onboard ADC allows for monitoring of board current, voltage,
+power, energy and fault status. The device features analog foldback current
+limiting and supply monitoring for applications from 2.9V to 33V. Dual 12V gate
+drive allows high power applications to either share safe operating area across
+parallel MOSFETs or support a 2-stage start-up that first charges the load
+capacitance followed by enabling a low on-resistance path to the load. The
+LTC4282 is well suited to high power applications because the precise monitoring
+capability and accurate current limiting reduce the extremes in which both loads
+and power supplies must safely operate. Non-volatile configuration allows for
+flexibility in the autonomous generation of alerts and response to faults.
+
+Sysfs entries
+_____________
+
+The following attributes are supported. Limits are read-write and all the other
+attributes are read-only. Note that in0 and in1 are mutually exclusive. Enabling
+one disables the other and disabling one enables the other.
+
+======================= ==========================================
+in0_input		Output voltage (mV).
+in0_min			Undervoltage threshold
+in0_max                 Overvoltage threshold
+in0_lowest		Lowest measured voltage
+in0_highest		Highest measured voltage
+in0_reset_history	Write 1 to reset in0 history.
+			Also clears fet bad and short fault logs.
+in0_min_alarm		Undervoltage alarm
+in0_max_alarm           Overvoltage alarm
+in0_enable		Enable/Disable VSOURCE monitoring
+in0_fault		Failure in the MOSFETs. Either bad or shorted FET.
+in0_label		Channel label (VSOURCE)
+
+in1_input		Input voltage (mV).
+in1_min			Undervoltage threshold
+in1_max                 Overvoltage threshold
+in1_lowest		Lowest measured voltage
+in1_highest		Highest measured voltage
+in1_reset_history	Write 1 to reset in1 history.
+			Also clears over/undervoltage fault logs.
+in1_min_alarm		Undervoltage alarm
+in1_max_alarm           Overvoltage alarm
+in1_lcrit_alarm         Critical Undervoltage alarm
+in1_crit_alarm          Critical Overvoltage alarm
+in1_enable		Enable/Disable VDD monitoring
+in1_label		Channel label (VDD)
+
+in2_input		GPIO voltage (mV)
+in2_min			Undervoltage threshold
+in2_max			Overvoltage threshold
+in2_lowest		Lowest measured voltage
+in2_highest		Highest measured voltage
+in2_reset_history	Write 1 to reset in2 history
+in2_min_alarm		Undervoltage alarm
+in2_max_alarm		Overvoltage alarm
+in2_label		Channel label (VGPIO)
+
+curr1_input		Sense current (mA)
+curr1_min		Undercurrent threshold
+curr1_max		Overcurrent threshold
+curr1_lowest		Lowest measured current
+curr1_highest		Highest measured current
+curr1_reset_history	Write 1 to reset curr1 history.
+			Also clears overcurrent fault logs.
+curr1_min_alarm		Undercurrent alarm
+curr1_max_alarm		Overcurrent alarm
+curr1_crit_alarm        Critical Overcurrent alarm
+curr1_label		Channel label (ISENSE)
+
+power1_input		Power (in uW)
+power1_min		Low power threshold
+power1_max		High power threshold
+power1_input_lowest	Historical minimum power use
+power1_input_highest	Historical maximum power use
+power1_reset_history	Write 1 to reset power1 history.
+			Also clears power bad fault logs.
+power1_min_alarm	Low power alarm
+power1_max_alarm	High power alarm
+power1_label		Channel label (Power)
+
+energy1_input		Measured energy over time (in microJoule)
+energy1_enable		Enable/Disable Energy accumulation
+======================= ==========================================
+
+DebugFs entries
+_______________
+
+The chip also has a fault log register where failures can be logged. Hence,
+as these are logging events, we give access to them in debugfs. Note that
+even if some failure is detected in these logs, it does necessarily mean
+that the failure is still present. As mentioned in the proper Sysfs entries,
+these logs can be cleared by writing in the proper reset_history attribute.
+
+.. warning:: The debugfs interface is subject to change without notice
+             and is only available when the kernel is compiled with
+             ``CONFIG_DEBUG_FS`` defined.
+
+``/sys/kernel/debug/ltc4282-hwmon[X]/``
+contains the following attributes:
+
+=======================  ==========================================
+power1_bad_fault_log     Set to 1 by a power1 bad fault occurring.
+in0_fet_short_fault_log	 Set to 1 when the ADC detects a FET-short fault.
+in0_fet_bad_fault_log    Set to 1 when a FET-BAD fault occurs.
+in1_crit_fault_log       Set to 1 by a VDD overvoltage fault occurring.
+in1_lcrit_fault_log      Set to 1 by a VDD undervoltage fault occurring.
+curr1_crit_fault_log	 Set to 1 by an overcurrent fault occurring.
+=======================  ==========================================
diff --git a/Documentation/hwmon/max6620.rst b/Documentation/hwmon/max6620.rst
index 84c1c44d3de4de..d70173bf0242c1 100644
--- a/Documentation/hwmon/max6620.rst
+++ b/Documentation/hwmon/max6620.rst
@@ -11,7 +11,7 @@ Supported chips:
 
     Addresses scanned: none
 
-    Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6620.pdf
 
 Authors:
     - L\. Grunenberg <contact@lgrunenberg.de>
diff --git a/Documentation/hwmon/mpq8785.rst b/Documentation/hwmon/mpq8785.rst
new file mode 100644
index 00000000000000..bf8176b8708687
--- /dev/null
+++ b/Documentation/hwmon/mpq8785.rst
@@ -0,0 +1,94 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver mpq8785
+=======================
+
+Supported chips:
+
+  * MPS MPQ8785
+
+    Prefix: 'mpq8785'
+
+Author: Charles Hsu <ythsu0511@gmail.com>
+
+Description
+-----------
+
+The MPQ8785 is a fully integrated, PMBus-compatible, high-frequency, synchronous
+buck converter. The MPQ8785 offers a very compact solution that achieves up to
+40A output current per phase, with excellent load and line regulation over a
+wide input supply range. The MPQ8785 operates at high efficiency over a wide
+output current load range.
+
+The PMBus interface provides converter configurations and key parameters
+monitoring.
+
+The MPQ8785 adopts MPS's proprietary multi-phase digital constant-on-time (MCOT)
+control, which provides fast transient response and eases loop stabilization.
+The MCOT scheme also allows multiple MPQ8785 devices to be connected in parallel
+with excellent current sharing and phase interleaving for high-current
+applications.
+
+Fully integrated protection features include over-current protection (OCP),
+over-voltage protection (OVP), under-voltage protection (UVP), and
+over-temperature protection (OTP).
+
+The MPQ8785 requires a minimal number of readily available, standard external
+components, and is available in a TLGA (5mmx6mm) package.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+**curr1_crit**
+
+**curr1_crit_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
diff --git a/Documentation/hwmon/nct6683.rst b/Documentation/hwmon/nct6683.rst
index 3e7f6ee779c2f9..2a7a78eb1b4688 100644
--- a/Documentation/hwmon/nct6683.rst
+++ b/Documentation/hwmon/nct6683.rst
@@ -64,4 +64,5 @@ Intel DB85FL	NCT6683D EC firmware version 1.0 build 04/03/13
 ASRock X570	NCT6683D EC firmware version 1.0 build 06/28/19
 ASRock X670E	NCT6686D EC firmware version 1.0 build 05/19/22
 MSI B550	NCT6687D EC firmware version 1.0 build 05/07/20
+MSI X670-P	NCT6687D EC firmware version 0.0 build 09/27/22
 =============== ===============================================
diff --git a/Documentation/hwmon/nzxt-kraken3.rst b/Documentation/hwmon/nzxt-kraken3.rst
new file mode 100644
index 00000000000000..90fd9dec15ff22
--- /dev/null
+++ b/Documentation/hwmon/nzxt-kraken3.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-kraken3
+==========================
+
+Supported devices:
+
+* NZXT Kraken X53
+* NZXT Kraken X63
+* NZXT Kraken X73
+* NZXT Kraken Z53
+* NZXT Kraken Z63
+* NZXT Kraken Z73
+
+Author: Jonas Malaco, Aleksa Savic
+
+Description
+-----------
+
+This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and
+Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature
+and pump speed (in RPM), as well as PWM control (either as a fixed value
+or through a temp-PWM curve). The Z-series models additionally expose the speed
+and duty of an optionally connected fan, with the same PWM control capabilities.
+
+Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is
+for the manual control mode and 2 is for the liquid temp to PWM curve mode.
+Writing a 0 disables control of the channel through the driver after setting its
+duty to 100%.
+
+The temperature of the curves relates to the fixed [20-59] range, correlating to
+the detected liquid temperature. Only PWM values (ranging from 0-255) can be set.
+If in curve mode, setting point values should be done in moderation - the devices
+require complete curves to be sent for each change; they can lock up or discard
+the changes if they are too numerous at once. Suggestion is to set them while
+in an another mode, and then apply them by switching to curve.
+
+The devices can report if they are faulty. The driver supports that situation
+and will issue a warning. This can also happen when the USB cable is connected,
+but SATA power is not.
+
+The addressable RGB LEDs and LCD screen (only on Z-series models) are not
+supported in this driver, but can be controlled through existing userspace tools,
+such as `liquidctl`_.
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Usage Notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Possible pwm_enable values are:
+
+====== ==========================================================================
+0      Set fan to 100%
+1      Direct PWM mode (applies value in corresponding PWM entry)
+2      Curve control mode (applies the temp-PWM duty curve based on coolant temp)
+====== ==========================================================================
+
+Sysfs entries
+-------------
+
+============================== ================================================================
+fan1_input                     Pump speed (in rpm)
+fan2_input                     Fan speed (in rpm)
+temp1_input                    Coolant temperature (in millidegrees Celsius)
+pwm1                           Pump duty (value between 0-255)
+pwm1_enable                    Pump duty control mode (0: disabled, 1: manual, 2: curve)
+pwm2                           Fan duty (value between 0-255)
+pwm2_enable                    Fan duty control mode (0: disabled, 1: manual, 2: curve)
+temp[1-2]_auto_point[1-40]_pwm Temp-PWM duty curves (for pump and fan), related to coolant temp
+============================== ================================================================
diff --git a/Documentation/hwmon/oxp-sensors.rst b/Documentation/hwmon/oxp-sensors.rst
index 3adeb7406243fb..55b1ef61625ebc 100644
--- a/Documentation/hwmon/oxp-sensors.rst
+++ b/Documentation/hwmon/oxp-sensors.rst
@@ -33,6 +33,7 @@ Currently the driver supports the following handhelds:
  - AOK ZOE A1 PRO
  - Aya Neo 2
  - Aya Neo AIR
+ - Aya Neo AIR Plus (Mendocino)
  - Aya Neo AIR Pro
  - Aya Neo Geek
  - OneXPlayer AMD
diff --git a/Documentation/hwmon/pt5161l.rst b/Documentation/hwmon/pt5161l.rst
new file mode 100644
index 00000000000000..1b97336991ea5f
--- /dev/null
+++ b/Documentation/hwmon/pt5161l.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver pt5161l
+=====================
+
+Supported chips:
+
+  * Astera Labs PT5161L
+
+    Prefix: 'pt5161l'
+
+    Addresses scanned: I2C 0x20 - 0x27
+
+    Datasheet: Not publicly available.
+
+Authors: Cosmo Chou <cosmo.chou@quantatw.com>
+
+Description
+-----------
+
+This driver implements support for temperature monitoring of Astera Labs
+PT5161L series PCIe retimer chips.
+
+This driver implementation originates from the CSDK available at
+https://github.com/facebook/openbmc/tree/helium/common/recipes-lib/retimer-v2.14
+The communication protocol utilized is based on the I2C/SMBus standard.
+
+Sysfs entries
+----------------
+
+================ ==============================================
+temp1_input      Measured temperature (in millidegrees Celsius)
+================ ==============================================
+
+Debugfs entries
+----------------
+
+================ ===============================
+fw_load_status   Firmware load status
+fw_ver           Firmware version of the retimer
+heartbeat_status Heartbeat status
+================ ===============================
diff --git a/Documentation/hwmon/sht3x.rst b/Documentation/hwmon/sht3x.rst
index 957c854f5d088c..9585fa7c5a5d87 100644
--- a/Documentation/hwmon/sht3x.rst
+++ b/Documentation/hwmon/sht3x.rst
@@ -65,6 +65,10 @@ When the temperature and humidity readings move back between the hysteresis
 values, the alert bit is set to 0 and the alert pin on the sensor is set to
 low.
 
+The serial number exposed to debugfs allows for unique identification of the
+sensors. For sts32, sts33 and sht33, the manufacturer provides calibration
+certificates through an API.
+
 sysfs-Interface
 ---------------
 
@@ -99,3 +103,10 @@ repeatability:      write or read repeatability, higher repeatability means
                         - 1: medium repeatability
                         - 2: high repeatability
 =================== ============================================================
+
+debugfs-Interface
+-----------------
+
+=================== ============================================================
+serial_number:      unique serial number of the sensor in decimal
+=================== ============================================================
diff --git a/Documentation/hwmon/surface_fan.rst b/Documentation/hwmon/surface_fan.rst
new file mode 100644
index 00000000000000..07942574c4f0cf
--- /dev/null
+++ b/Documentation/hwmon/surface_fan.rst
@@ -0,0 +1,25 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver surface_fan
+=========================
+
+Supported Devices:
+
+  * Microsoft Surface Pro 9
+
+Author: Ivor Wanders <ivor@iwanders.net>
+
+Description
+-----------
+
+This provides monitoring of the fan found in some Microsoft Surface Pro devices,
+like the Surface Pro 9. The fan is always controlled by the onboard controller.
+
+Sysfs interface
+---------------
+
+======================= ======= =========================================
+Name                    Perm    Description
+======================= ======= =========================================
+``fan1_input``          RO      Current fan speed in RPM.
+======================= ======= =========================================