Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "s390:

   - More phys_to_virt conversions

   - Improvement of AP management for VSIE (nested virtualization)

  ARM64:

   - Numerous fixes for the pathological lock inversion issue that
     plagued KVM/arm64 since... forever.

   - New framework allowing SMCCC-compliant hypercalls to be forwarded
     to userspace, hopefully paving the way for some more features being
     moved to VMMs rather than be implemented in the kernel.

   - Large rework of the timer code to allow a VM-wide offset to be
     applied to both virtual and physical counters as well as a
     per-timer, per-vcpu offset that complements the global one. This
     last part allows the NV timer code to be implemented on top.

   - A small set of fixes to make sure that we don't change anything
     affecting the EL1&0 translation regime just after having having
     taken an exception to EL2 until we have executed a DSB. This
     ensures that speculative walks started in EL1&0 have completed.

   - The usual selftest fixes and improvements.

  x86:

   - Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
     enabled, and by giving the guest control of CR0.WP when EPT is
     enabled on VMX (VMX-only because SVM doesn't support per-bit
     controls)

   - Add CR0/CR4 helpers to query single bits, and clean up related code
     where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
     return as a bool

   - Move AMD_PSFD to cpufeatures.h and purge KVM's definition

   - Avoid unnecessary writes+flushes when the guest is only adding new
     PTEs

   - Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
     optimizations when emulating invalidations

   - Clean up the range-based flushing APIs

   - Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
     single A/D bit using a LOCK AND instead of XCHG, and skip all of
     the "handle changed SPTE" overhead associated with writing the
     entire entry

   - Track the number of "tail" entries in a pte_list_desc to avoid
     having to walk (potentially) all descriptors during insertion and
     deletion, which gets quite expensive if the guest is spamming
     fork()

   - Disallow virtualizing legacy LBRs if architectural LBRs are
     available, the two are mutually exclusive in hardware

   - Disallow writes to immutable feature MSRs (notably
     PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features

   - Overhaul the vmx_pmu_caps selftest to better validate
     PERF_CAPABILITIES

   - Apply PMU filters to emulated events and add test coverage to the
     pmu_event_filter selftest

   - AMD SVM:
       - Add support for virtual NMIs
       - Fixes for edge cases related to virtual interrupts

   - Intel AMX:
       - Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
         XTILE_DATA is not being reported due to userspace not opting in
         via prctl()
       - Fix a bug in emulation of ENCLS in compatibility mode
       - Allow emulation of NOP and PAUSE for L2
       - AMX selftests improvements
       - Misc cleanups

  MIPS:

   - Constify MIPS's internal callbacks (a leftover from the hardware
     enabling rework that landed in 6.3)

  Generic:

   - Drop unnecessary casts from "void *" throughout kvm_main.c

   - Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
     struct size by 8 bytes on 64-bit kernels by utilizing a padding
     hole

  Documentation:

   - Fix goof introduced by the conversion to rST"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
  KVM: s390: pci: fix virtual-physical confusion on module unload/load
  KVM: s390: vsie: clarifications on setting the APCB
  KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
  KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
  KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
  KVM: selftests: Test the PMU event "Instructions retired"
  KVM: selftests: Copy full counter values from guest in PMU event filter test
  KVM: selftests: Use error codes to signal errors in PMU event filter test
  KVM: selftests: Print detailed info in PMU event filter asserts
  KVM: selftests: Add helpers for PMC asserts in PMU event filter test
  KVM: selftests: Add a common helper for the PMU event filter guest code
  KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
  KVM: arm64: vhe: Drop extra isb() on guest exit
  KVM: arm64: vhe: Synchronise with page table walker on MMU update
  KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
  KVM: arm64: nvhe: Synchronise with page table walker on TLBI
  KVM: arm64: Handle 32bit CNTPCTSS traps
  KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
  KVM: arm64: vgic: Don't acquire its_lock before config_lock
  KVM: selftests: Add test to verify KVM's supported XCR0
  ...

3 files changed, 150 insertions, 6 deletions

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index 841e9d1987bde..add067793b90b 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -5645,7 +5645,8 @@ with the KVM_XEN_VCPU_GET_ATTR ioctl.
   };
 
 Copies Memory Tagging Extension (MTE) tags to/from guest tag memory. The
-``guest_ipa`` and ``length`` fields must be ``PAGE_SIZE`` aligned. The ``addr``
+``guest_ipa`` and ``length`` fields must be ``PAGE_SIZE`` aligned.
+``length`` must not be bigger than 2^31 - PAGE_SIZE bytes. The ``addr``
 field must point to a buffer which the tags will be copied to or from.
 
 ``flags`` specifies the direction of copy, either ``KVM_ARM_TAGS_TO_GUEST`` or
@@ -6029,6 +6030,44 @@ delivery must be provided via the "reg_aen" struct.
 The "pad" and "reserved" fields may be used for future extensions and should be
 set to 0s by userspace.
 
+4.138 KVM_ARM_SET_COUNTER_OFFSET
+--------------------------------
+
+:Capability: KVM_CAP_COUNTER_OFFSET
+:Architectures: arm64
+:Type: vm ioctl
+:Parameters: struct kvm_arm_counter_offset (in)
+:Returns: 0 on success, < 0 on error
+
+This capability indicates that userspace is able to apply a single VM-wide
+offset to both the virtual and physical counters as viewed by the guest
+using the KVM_ARM_SET_CNT_OFFSET ioctl and the following data structure:
+
+::
+
+	struct kvm_arm_counter_offset {
+		__u64 counter_offset;
+		__u64 reserved;
+	};
+
+The offset describes a number of counter cycles that are subtracted from
+both virtual and physical counter views (similar to the effects of the
+CNTVOFF_EL2 and CNTPOFF_EL2 system registers, but only global). The offset
+always applies to all vcpus (already created or created after this ioctl)
+for this VM.
+
+It is userspace's responsibility to compute the offset based, for example,
+on previous values of the guest counters.
+
+Any value other than 0 for the "reserved" field may result in an error
+(-EINVAL) being returned. This ioctl can also return -EBUSY if any vcpu
+ioctl is issued concurrently.
+
+Note that using this ioctl results in KVM ignoring subsequent userspace
+writes to the CNTVCT_EL0 and CNTPCT_EL0 registers using the SET_ONE_REG
+interface. No error will be returned, but the resulting offset will not be
+applied.
+
 5. The kvm_run structure
 ========================
 
@@ -6218,15 +6257,40 @@ to the byte array.
 			__u64 nr;
 			__u64 args[6];
 			__u64 ret;
-			__u32 longmode;
-			__u32 pad;
+			__u64 flags;
 		} hypercall;
 
-Unused.  This was once used for 'hypercall to userspace'.  To implement
-such functionality, use KVM_EXIT_IO (x86) or KVM_EXIT_MMIO (all except s390).
+
+It is strongly recommended that userspace use ``KVM_EXIT_IO`` (x86) or
+``KVM_EXIT_MMIO`` (all except s390) to implement functionality that
+requires a guest to interact with host userpace.
 
 .. note:: KVM_EXIT_IO is significantly faster than KVM_EXIT_MMIO.
 
+For arm64:
+----------
+
+SMCCC exits can be enabled depending on the configuration of the SMCCC
+filter. See the Documentation/virt/kvm/devices/vm.rst
+``KVM_ARM_SMCCC_FILTER`` for more details.
+
+``nr`` contains the function ID of the guest's SMCCC call. Userspace is
+expected to use the ``KVM_GET_ONE_REG`` ioctl to retrieve the call
+parameters from the vCPU's GPRs.
+
+Definition of ``flags``:
+ - ``KVM_HYPERCALL_EXIT_SMC``: Indicates that the guest used the SMC
+   conduit to initiate the SMCCC call. If this bit is 0 then the guest
+   used the HVC conduit for the SMCCC call.
+
+ - ``KVM_HYPERCALL_EXIT_16BIT``: Indicates that the guest used a 16bit
+   instruction to initiate the SMCCC call. If this bit is 0 then the
+   guest used a 32bit instruction. An AArch64 guest always has this
+   bit set to 0.
+
+At the point of exit, PC points to the instruction immediately following
+the trapping instruction.
+
 ::
 
 		/* KVM_EXIT_TPR_ACCESS */
@@ -7266,6 +7330,7 @@ and injected exceptions.
        will clear DR6.RTM.
 
 7.18 KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2
+--------------------------------------
 
 :Architectures: x86, arm64, mips
 :Parameters: args[0] whether feature should be enabled or not
diff --git a/Documentation/virt/kvm/devices/vm.rst b/Documentation/virt/kvm/devices/vm.rst
index 147efec626e52..9d726e60ec472 100644
--- a/Documentation/virt/kvm/devices/vm.rst
+++ b/Documentation/virt/kvm/devices/vm.rst
@@ -321,3 +321,82 @@ Allows userspace to query the status of migration mode.
 	     if it is enabled
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    0 in case of success.
+
+6. GROUP: KVM_ARM_VM_SMCCC_CTRL
+===============================
+
+:Architectures: arm64
+
+6.1. ATTRIBUTE: KVM_ARM_VM_SMCCC_FILTER (w/o)
+---------------------------------------------
+
+:Parameters: Pointer to a ``struct kvm_smccc_filter``
+
+:Returns:
+
+        ======  ===========================================
+        EEXIST  Range intersects with a previously inserted
+                or reserved range
+        EBUSY   A vCPU in the VM has already run
+        EINVAL  Invalid filter configuration
+        ENOMEM  Failed to allocate memory for the in-kernel
+                representation of the SMCCC filter
+        ======  ===========================================
+
+Requests the installation of an SMCCC call filter described as follows::
+
+    enum kvm_smccc_filter_action {
+            KVM_SMCCC_FILTER_HANDLE = 0,
+            KVM_SMCCC_FILTER_DENY,
+            KVM_SMCCC_FILTER_FWD_TO_USER,
+    };
+
+    struct kvm_smccc_filter {
+            __u32 base;
+            __u32 nr_functions;
+            __u8 action;
+            __u8 pad[15];
+    };
+
+The filter is defined as a set of non-overlapping ranges. Each
+range defines an action to be applied to SMCCC calls within the range.
+Userspace can insert multiple ranges into the filter by using
+successive calls to this attribute.
+
+The default configuration of KVM is such that all implemented SMCCC
+calls are allowed. Thus, the SMCCC filter can be defined sparsely
+by userspace, only describing ranges that modify the default behavior.
+
+The range expressed by ``struct kvm_smccc_filter`` is
+[``base``, ``base + nr_functions``). The range is not allowed to wrap,
+i.e. userspace cannot rely on ``base + nr_functions`` overflowing.
+
+The SMCCC filter applies to both SMC and HVC calls initiated by the
+guest. The SMCCC filter gates the in-kernel emulation of SMCCC calls
+and as such takes effect before other interfaces that interact with
+SMCCC calls (e.g. hypercall bitmap registers).
+
+Actions:
+
+ - ``KVM_SMCCC_FILTER_HANDLE``: Allows the guest SMCCC call to be
+   handled in-kernel. It is strongly recommended that userspace *not*
+   explicitly describe the allowed SMCCC call ranges.
+
+ - ``KVM_SMCCC_FILTER_DENY``: Rejects the guest SMCCC call in-kernel
+   and returns to the guest.
+
+ - ``KVM_SMCCC_FILTER_FWD_TO_USER``: The guest SMCCC call is forwarded
+   to userspace with an exit reason of ``KVM_EXIT_HYPERCALL``.
+
+The ``pad`` field is reserved for future use and must be zero. KVM may
+return ``-EINVAL`` if the field is nonzero.
+
+KVM reserves the 'Arm Architecture Calls' range of function IDs and
+will reject attempts to define a filter for any portion of these ranges:
+
+        =========== ===============
+        Start       End (inclusive)
+        =========== ===============
+        0x8000_0000 0x8000_FFFF
+        0xC000_0000 0xC000_FFFF
+        =========== ===============
diff --git a/Documentation/virt/kvm/locking.rst b/Documentation/virt/kvm/locking.rst
index 14c4e9fa501d6..8c77554e48963 100644
--- a/Documentation/virt/kvm/locking.rst
+++ b/Documentation/virt/kvm/locking.rst
@@ -21,7 +21,7 @@ The acquisition orders for mutexes are as follows:
 - kvm->mn_active_invalidate_count ensures that pairs of
   invalidate_range_start() and invalidate_range_end() callbacks
   use the same memslots array.  kvm->slots_lock and kvm->slots_arch_lock
-  are taken on the waiting side in install_new_memslots, so MMU notifiers
+  are taken on the waiting side when modifying memslots, so MMU notifiers
   must not take either kvm->slots_lock or kvm->slots_arch_lock.
 
 For SRCU: