diff options
| author | Randy Dunlap <rdunlap@infradead.org> | 2023-01-29 15:10:51 -0800 |
|---|---|---|
| committer | Martin K. Petersen <martin.petersen@oracle.com> | 2023-02-08 18:49:48 -0500 |
| commit | cf065a7da517367fd1b15295933db10631a956d7 (patch) | |
| tree | 37c29c38e518791792954025511deaabe9bc7328 /Documentation/scsi | |
| parent | 685d5ef436a9a02c50e45a4e090dc669a0b38c95 (diff) | |
| download | linux-cf065a7da517367fd1b15295933db10631a956d7.tar.gz | |
scsi: Documentation: Correct spelling
Correct spelling problems for Documentation/scsi/ as reported by codespell.
Link: https://lore.kernel.org/r/20230129231053.20863-8-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'Documentation/scsi')
| -rw-r--r-- | Documentation/scsi/ncr53c8xx.rst | 4 | ||||
| -rw-r--r-- | Documentation/scsi/sym53c8xx_2.rst | 2 | ||||
| -rw-r--r-- | Documentation/scsi/tcm_qla2xxx.rst | 2 | ||||
| -rw-r--r-- | Documentation/scsi/ufs.rst | 2 |
4 files changed, 5 insertions, 5 deletions
diff --git a/Documentation/scsi/ncr53c8xx.rst b/Documentation/scsi/ncr53c8xx.rst index c41cec99f07c7..1c79e08ec9649 100644 --- a/Documentation/scsi/ncr53c8xx.rst +++ b/Documentation/scsi/ncr53c8xx.rst @@ -906,7 +906,7 @@ burst:#x burst enabled (1<<#x burst transfers max) led:0 disable LED support ===== =================== - Donnot enable LED support if your scsi board does not use SDMS BIOS. + Do not enable LED support if your scsi board does not use SDMS BIOS. (See 'Configuration parameters') 10.2.13 Max wide @@ -1222,7 +1222,7 @@ Unfortunately, the following common SCSI BUS problems are not detected: - Bad quality terminators. On the other hand, either bad cabling, broken devices, not conformant -devices, ... may cause a SCSI signal to be wrong when te driver reads it. +devices, ... may cause a SCSI signal to be wrong when the driver reads it. 10.7 IMMEDIATE ARBITRATION boot option ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Documentation/scsi/sym53c8xx_2.rst b/Documentation/scsi/sym53c8xx_2.rst index 8de44a7baa9b3..004f1a750e7d5 100644 --- a/Documentation/scsi/sym53c8xx_2.rst +++ b/Documentation/scsi/sym53c8xx_2.rst @@ -703,7 +703,7 @@ Unfortunately, the following common SCSI BUS problems are not detected: - Bad quality terminators. On the other hand, either bad cabling, broken devices, not conformant -devices, ... may cause a SCSI signal to be wrong when te driver reads it. +devices, ... may cause a SCSI signal to be wrong when the driver reads it. 15. SCSI problem troubleshooting ================================ diff --git a/Documentation/scsi/tcm_qla2xxx.rst b/Documentation/scsi/tcm_qla2xxx.rst index 91bc1fcd369e2..7268c2771e8fb 100644 --- a/Documentation/scsi/tcm_qla2xxx.rst +++ b/Documentation/scsi/tcm_qla2xxx.rst @@ -6,7 +6,7 @@ tcm_qla2xxx Driver Notes tcm_qla2xxx jam_host attribute ------------------------------ -There is now a new module endpoint atribute called jam_host +There is now a new module endpoint attribute called jam_host attribute:: jam_host: boolean=0/1 diff --git a/Documentation/scsi/ufs.rst b/Documentation/scsi/ufs.rst index 885b1a736e3f3..a7b2b2ed1c3ae 100644 --- a/Documentation/scsi/ufs.rst +++ b/Documentation/scsi/ufs.rst @@ -206,5 +206,5 @@ Device-Specific Data property named "ref-clk-freq". In both ways the value is interpreted as frequency in Hz and must match one of the values given in the UFS specification. UFS subsystem will attempt to read the value when executing common controller initialization. If the value is available, UFS -subsytem will ensure the bRefClkFreq attribute of the UFS storage device is +subsystem will ensure the bRefClkFreq attribute of the UFS storage device is set accordingly and will modify it if there is a mismatch. |