Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - v4l core: subdev frame interval now supports which field

 - v4l kapi: moves and renames the init_cfg pad op to init_state as an
   internal op.

 - new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900

 - new camera driver: STM32 DCMIPP

 - s5p-mfc has gained MFC v12 support

 - new ISP driver added to staging: Starfive

 - new stateful encoder/decoded: Wave5 codec It is found on the J721S2
   SoC, JH7100 SoC, ssd202d SoC. Etc.

 - fwnode gained support for MIPI "DisCo for Imaging"
   (https://www.mipi.org/specifications/mipi-disco-imaging)

 - as usual, lots of cleanups, fixups and driver improvements.

* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
  media: i2c: thp7312: select CONFIG_FW_LOADER
  media: i2c: mt9m114: use fsleep() in place of udelay()
  media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
  media: i2c: thp7312: Store frame interval in subdev state
  media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
  media: docs: uAPI: Expand error documentation for invalid 'which' value
  media: docs: uAPI: Clarify error documentation for invalid 'which' value
  media: v4l2-subdev: Store frame interval in subdev state
  media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
  media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
  media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
  media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
  media: s5p-mfc: Load firmware for each run in MFCv12.
  media: s5p-mfc: Set context for valid case before calling try_run
  media: s5p-mfc: Add support for DMABUF for encoder
  media: s5p-mfc: Add support for UHD encoding.
  media: s5p-mfc: Add support for rate controls in MFCv12
  media: s5p-mfc: Add YV12 and I420 multiplanar format support
  media: s5p-mfc: Add initial support for MFCv12
  media: s5p-mfc: Rename IS_MFCV10 macro
  ...

4 files changed, 87 insertions, 0 deletions

diff --git a/Documentation/admin-guide/media/starfive_camss.rst b/Documentation/admin-guide/media/starfive_camss.rst
new file mode 100644
index 0000000000000..ca42e9447c47b
--- /dev/null
+++ b/Documentation/admin-guide/media/starfive_camss.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+================================
+Starfive Camera Subsystem driver
+================================
+
+Introduction
+------------
+
+This file documents the driver for the Starfive Camera Subsystem found on
+Starfive JH7110 SoC. The driver is located under drivers/staging/media/starfive/
+camss.
+
+The driver implements V4L2, Media controller and v4l2_subdev interfaces. Camera
+sensor using V4L2 subdev interface in the kernel is supported.
+
+The driver has been successfully used on the Gstreamer 1.18.5 with v4l2src
+plugin.
+
+
+Starfive Camera Subsystem hardware
+----------------------------------
+
+The Starfive Camera Subsystem hardware consists of::
+
+                    |\         +---------------+      +-----------+
+  +----------+      |  \       |               |      |           |
+  |          |      |   |      |               |      |           |
+  |   MIPI   |----->|   |----->|      ISP      |----->|           |
+  |          |      |   |      |               |      |           |
+  +----------+      |   |      |               |      |  Memory   |
+                    |MUX|      +---------------+      | Interface |
+  +----------+      |   |                             |           |
+  |          |      |   |---------------------------->|           |
+  | Parallel |----->|   |                             |           |
+  |          |      |   |                             |           |
+  +----------+      |  /                              |           |
+                    |/                                +-----------+
+
+- MIPI: The MIPI interface, receiving data from a MIPI CSI-2 camera sensor.
+
+- Parallel: The parallel interface,  receiving data from a parallel sensor.
+
+- ISP: The ISP, processing raw Bayer data from an image sensor and producing
+  YUV frames.
+
+
+Topology
+--------
+
+The media controller pipeline graph is as follows:
+
+.. _starfive_camss_graph:
+
+.. kernel-figure:: starfive_camss_graph.dot
+    :alt:   starfive_camss_graph.dot
+    :align: center
+
+The driver has 2 video devices:
+
+- capture_raw: The capture device, capturing image data directly from a sensor.
+- capture_yuv: The capture device, capturing YUV frame data processed by the
+  ISP module
+
+The driver has 3 subdevices:
+
+- stf_isp: is responsible for all the isp operations, outputs YUV frames.
+- cdns_csi2rx: a CSI-2 bridge supporting up to 4 CSI lanes in input, and 4
+  different pixel streams in output.
+- imx219: an image sensor, image data is sent through MIPI CSI-2.
diff --git a/Documentation/admin-guide/media/starfive_camss_graph.dot b/Documentation/admin-guide/media/starfive_camss_graph.dot
new file mode 100644
index 0000000000000..8eff1f161ac7f
--- /dev/null
+++ b/Documentation/admin-guide/media/starfive_camss_graph.dot
@@ -0,0 +1,12 @@
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{<port0> 0} | stf_isp\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port1 -> n00000008 [style=dashed]
+	n00000004 [label="capture_raw\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n00000008 [label="capture_yuv\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n0000000e [label="{{<port0> 0} | cdns_csi2rx.19800000.csi-bridge\n | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
+	n0000000e:port1 -> n00000001:port0 [style=dashed]
+	n0000000e:port1 -> n00000004 [style=dashed]
+	n00000018 [label="{{} | imx219 6-0010\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000018:port0 -> n0000000e:port0 [style=bold]
+}
diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
index 61283d67ceefb..f4bb2605f07e3 100644
--- a/Documentation/admin-guide/media/v4l-drivers.rst
+++ b/Documentation/admin-guide/media/v4l-drivers.rst
@@ -28,6 +28,7 @@ Video4Linux (V4L) driver-specific documentation
 	si470x
 	si4713
 	si476x
+	starfive_camss
 	vimc
 	visl
 	vivid
diff --git a/Documentation/admin-guide/media/visl.rst b/Documentation/admin-guide/media/visl.rst
index 4328c6c72d305..db1ef29438e16 100644
--- a/Documentation/admin-guide/media/visl.rst
+++ b/Documentation/admin-guide/media/visl.rst
@@ -71,6 +71,7 @@ The following codecs are supported:
 - VP9
 - H.264
 - HEVC
+- AV1
 
 visl trace events
 -----------------
@@ -79,6 +80,7 @@ The trace events are defined on a per-codec basis, e.g.:
 .. code-block:: bash
 
         $ ls /sys/kernel/tracing/events/ | grep visl
+        visl_av1_controls
         visl_fwht_controls
         visl_h264_controls
         visl_hevc_controls