Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "API:
   - Add virtual-address based lskcipher interface
   - Optimise ahash/shash performance in light of costly indirect calls
   - Remove ahash alignmask attribute

  Algorithms:
   - Improve AES/XTS performance of 6-way unrolling for ppc
   - Remove some uses of obsolete algorithms (md4, md5, sha1)
   - Add FIPS 202 SHA-3 support in pkcs1pad
   - Add fast path for single-page messages in adiantum
   - Remove zlib-deflate

  Drivers:
   - Add support for S4 in meson RNG driver
   - Add STM32MP13x support in stm32
   - Add hwrng interface support in qcom-rng
   - Add support for deflate algorithm in hisilicon/zip"

* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
  crypto: adiantum - flush destination page before unmapping
  crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
  Documentation/module-signing.txt: bring up to date
  module: enable automatic module signing with FIPS 202 SHA-3
  crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
  crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
  crypto: FIPS 202 SHA-3 register in hash info for IMA
  x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
  crypto: ahash - optimize performance when wrapping shash
  crypto: ahash - check for shash type instead of not ahash type
  crypto: hash - move "ahash wrapping shash" functions to ahash.c
  crypto: talitos - stop using crypto_ahash::init
  crypto: chelsio - stop using crypto_ahash::init
  crypto: ahash - improve file comment
  crypto: ahash - remove struct ahash_request_priv
  crypto: ahash - remove crypto_ahash_alignmask
  crypto: gcm - stop using alignmask of ahash
  crypto: chacha20poly1305 - stop using alignmask of ahash
  crypto: ccm - stop using alignmask of ahash
  net: ipv6: stop checking crypto_ahash_alignmask
  ...

4 files changed, 338 insertions, 1 deletions

diff --git a/Documentation/ABI/testing/debugfs-driver-qat b/Documentation/ABI/testing/debugfs-driver-qat
index 6731ffacc5f0c..b2db010d851ee 100644
--- a/Documentation/ABI/testing/debugfs-driver-qat
+++ b/Documentation/ABI/testing/debugfs-driver-qat
@@ -1,4 +1,4 @@
-What:		/sys/kernel/debug/qat_<device>_<BDF>/qat/fw_counters
+What:		/sys/kernel/debug/qat_<device>_<BDF>/fw_counters
 Date:		November 2023
 KernelVersion:	6.6
 Contact:	qat-linux@intel.com
@@ -59,3 +59,25 @@ Description:	(RO) Read returns the device health status.
 
 		The driver does not monitor for Heartbeat. It is left for a user
 		to poll the status periodically.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/pm_status
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:	(RO) Read returns power management information specific to the
+		QAT device.
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/cnv_errors
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:	(RO) Read returns, for each Acceleration Engine (AE), the number
+		of errors and the type of the last error detected by the device
+		when performing verified compression.
+		Reported counters::
+
+			<N>: Number of Compress and Verify (CnV) errors and type
+			     of the last CnV error detected by Acceleration
+			     Engine N.
diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat
index ef6d6c57105ef..bbf329cf0d67b 100644
--- a/Documentation/ABI/testing/sysfs-driver-qat
+++ b/Documentation/ABI/testing/sysfs-driver-qat
@@ -29,6 +29,8 @@ Description:	(RW) Reports the current configuration of the QAT device.
 		  services
 		* asym;sym: identical to sym;asym
 		* dc: the device is configured for running compression services
+		* dcc: identical to dc but enables the dc chaining feature,
+		  hash then compression. If this is not required chose dc
 		* sym: the device is configured for running symmetric crypto
 		  services
 		* asym: the device is configured for running asymmetric crypto
@@ -93,3 +95,49 @@ Description:	(RW) This configuration option provides a way to force the device i
 			0
 
 		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat/rp2srv
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:
+		(RW) This attribute provides a way for a user to query a
+		specific ring pair for the type of service that it is currently
+		configured for.
+
+		When written to, the value is cached and used to perform the
+		read operation. Allowed values are in the range 0 to N-1, where
+		N is the max number of ring pairs supported by a device. This
+		can be queried using the attribute qat/num_rps.
+
+		A read returns the service associated to the ring pair queried.
+
+		The values are:
+
+		* dc: the ring pair is configured for running compression services
+		* sym: the ring pair is configured for running symmetric crypto
+		  services
+		* asym: the ring pair is configured for running asymmetric crypto
+		  services
+
+		Example usage::
+
+			# echo 1 > /sys/bus/pci/devices/<BDF>/qat/rp2srv
+			# cat /sys/bus/pci/devices/<BDF>/qat/rp2srv
+			sym
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat/num_rps
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:
+		(RO) Returns the number of ring pairs that a single device has.
+
+		Example usage::
+
+			# cat /sys/bus/pci/devices/<BDF>/qat/num_rps
+			64
+
+		This attribute is only available for qat_4xxx devices.
diff --git a/Documentation/ABI/testing/sysfs-driver-qat_ras b/Documentation/ABI/testing/sysfs-driver-qat_ras
new file mode 100644
index 0000000000000..176dea1e9c0aa
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-qat_ras
@@ -0,0 +1,41 @@
+What:		/sys/bus/pci/devices/<BDF>/qat_ras/errors_correctable
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:	(RO) Reports the number of correctable errors detected by the device.
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat_ras/errors_nonfatal
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:	(RO) Reports the number of non fatal errors detected by the device.
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat_ras/errors_fatal
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:	(RO) Reports the number of fatal errors detected by the device.
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat_ras/reset_error_counters
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:	(WO) Write to resets all error counters of a device.
+
+		The following example reports how to reset the counters::
+
+			# echo 1 > /sys/bus/pci/devices/<BDF>/qat_ras/reset_error_counters
+			# cat /sys/bus/pci/devices/<BDF>/qat_ras/errors_correctable
+			0
+			# cat /sys/bus/pci/devices/<BDF>/qat_ras/errors_nonfatal
+			0
+			# cat /sys/bus/pci/devices/<BDF>/qat_ras/errors_fatal
+			0
+
+		This attribute is only available for qat_4xxx devices.
diff --git a/Documentation/ABI/testing/sysfs-driver-qat_rl b/Documentation/ABI/testing/sysfs-driver-qat_rl
new file mode 100644
index 0000000000000..8c282ae3155dd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-qat_rl
@@ -0,0 +1,226 @@
+What:		/sys/bus/pci/devices/<BDF>/qat_rl/sla_op
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:
+		(WO) This attribute is used to perform an operation on an SLA.
+		The supported operations are: add, update, rm, rm_all, and get.
+
+		Input values must be filled through the associated attribute in
+		this group before a write to this file.
+		If the operation completes successfully, the associated
+		attributes will be updated.
+		The associated attributes are: cir, pir, srv, rp, and id.
+
+		Supported operations:
+
+		* add: Creates a new SLA with the provided inputs from user.
+			* Inputs: cir, pir, srv, and rp
+			* Output: id
+
+		* get: Returns the configuration of the specified SLA in id attribute
+			* Inputs: id
+			* Outputs: cir, pir, srv, and rp
+
+		* update: Updates the SLA with new values set in the following attributes
+			* Inputs: id, cir, and pir
+
+		* rm: Removes the specified SLA in the id attribute.
+			* Inputs: id
+
+		* rm_all: Removes all the configured SLAs.
+			* Inputs: None
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat_rl/rp
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:
+		(RW) When read, reports the current assigned ring pairs for the
+		queried SLA.
+		When wrote to, configures the ring pairs associated to a new SLA.
+
+		The value is a 64-bit bit mask and is written/displayed in hex.
+		Each bit of this mask represents a single ring pair i.e.,
+		bit 1 == ring pair id 0; bit 3 == ring pair id 2.
+
+		Selected ring pairs must to be assigned to a single service,
+		i.e. the one provided with the srv attribute. The service
+		assigned to a certain ring pair can be checked by querying
+		the attribute qat/rp2srv.
+
+		The maximum number of ring pairs is 4 per SLA.
+
+		Applicability in sla_op:
+
+		* WRITE: add operation
+		* READ: get operation
+
+		Example usage::
+
+			## Read
+			# echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id
+			# cat /sys/bus/pci/devices/<BDF>/qat_rl/rp
+			0x5
+
+			## Write
+			# echo 0x5 > /sys/bus/pci/devices/<BDF>/qat_rl/rp
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat_rl/id
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:
+		(RW) If written to, the value is used to retrieve a particular
+		SLA and operate on it.
+		This is valid only for the following operations: update, rm,
+		and get.
+		A read of this attribute is only guaranteed to have correct data
+		after creation of an SLA.
+
+		Applicability in sla_op:
+
+		* WRITE: rm and update operations
+		* READ: add and get operations
+
+		Example usage::
+
+			## Read
+			## Set attributes e.g. cir, pir, srv, etc
+			# echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
+			# cat /sys/bus/pci/devices/<BDF>/qat_rl/id
+			4
+
+			## Write
+			# echo 7 > /sys/bus/pci/devices/<BDF>/qat_rl/id
+			# echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
+			# cat /sys/bus/pci/devices/<BDF>/qat_rl/rp
+			0x5  ## ring pair ID 0 and ring pair ID 2
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat_rl/cir
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:
+		(RW) Committed information rate (CIR). Rate guaranteed to be
+		achieved by a particular SLA. The value is expressed in
+		permille scale, i.e. 1000 refers to the maximum device
+		throughput for a selected service.
+
+		After sending a "get" to sla_op, this will be populated with the
+		CIR for that queried SLA.
+		Write to this file before sending an "add/update" sla_op, to set
+		the SLA to the specified value.
+
+		Applicability in sla_op:
+
+		* WRITE: add and update operations
+		* READ: get operation
+
+		Example usage::
+
+			## Write
+			# echo 500 > /sys/bus/pci/devices/<BDF>/qat_rl/cir
+			# echo "add" /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
+
+			## Read
+			# echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id
+			# echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
+			# cat /sys/bus/pci/devices/<BDF>/qat_rl/cir
+			500
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat_rl/pir
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:
+		(RW) Peak information rate (PIR). The maximum rate that can be
+		achieved by that particular SLA. An SLA can reach a value
+		between CIR and PIR when the device is not fully utilized by
+		requests from other users (assigned to different SLAs).
+
+		After sending a "get" to sla_op, this will be populated with the
+		PIR for that queried SLA.
+		Write to this file before sending an "add/update" sla_op, to set
+		the SLA to the specified value.
+
+		Applicability in sla_op:
+
+		* WRITE: add and update operations
+		* READ: get operation
+
+		Example usage::
+
+			## Write
+			# echo 750 > /sys/bus/pci/devices/<BDF>/qat_rl/pir
+			# echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
+
+			## Read
+			# echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id
+			# echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
+			# cat /sys/bus/pci/devices/<BDF>/qat_rl/pir
+			750
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat_rl/srv
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:
+		(RW) Service (SRV). Represents the service (sym, asym, dc)
+		associated to an SLA.
+		Can be written to or queried to set/show the SRV type for an SLA.
+		The SRV attribute is used to specify the SRV type before adding
+		an SLA. After an SLA is configured, reports the service
+		associated to that SLA.
+
+		Applicability in sla_op:
+
+		* WRITE: add and update operations
+		* READ: get operation
+
+		Example usage::
+
+			## Write
+			# echo "dc" > /sys/bus/pci/devices/<BDF>/qat_rl/srv
+			# echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
+			# cat /sys/bus/pci/devices/<BDF>/qat_rl/id
+			4
+
+			## Read
+			# echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id
+			# echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
+			# cat /sys/bus/pci/devices/<BDF>/qat_rl/srv
+			dc
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat_rl/cap_rem
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:
+		(RW) This file will return the remaining capability for a
+		particular service/sla. This is the remaining value that a new
+		SLA can be set to or a current SLA can be increased with.
+
+		Example usage::
+
+			# echo "asym" > /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem
+			# cat /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem
+			250
+			# echo 250 > /sys/bus/pci/devices/<BDF>/qat_rl/cir
+			# echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op
+			# cat /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem
+			0
+
+		This attribute is only available for qat_4xxx devices.