Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc/whatever driver subsystem updates
  for 5.12-rc1. Over time it seems like this tree is collecting more and
  more tiny driver subsystems in one place, making it easier for those
  maintainers, which is why this is getting larger.

  Included in here are:

   - coresight driver updates

   - habannalabs driver updates

   - virtual acrn driver addition (proper acks from the x86 maintainers)

   - broadcom misc driver addition

   - speakup driver updates

   - soundwire driver updates

   - fpga driver updates

   - amba driver updates

   - mei driver updates

   - vfio driver updates

   - greybus driver updates

   - nvmeem driver updates

   - phy driver updates

   - mhi driver updates

   - interconnect driver udpates

   - fsl-mc bus driver updates

   - random driver fix

   - some small misc driver updates (rtsx, pvpanic, etc.)

  All of these have been in linux-next for a while, with the only
  reported issue being a merge conflict due to the dfl_device_id
  addition from the fpga subsystem in here"

* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
  spmi: spmi-pmic-arb: Fix hw_irq overflow
  Documentation: coresight: Add PID tracing description
  coresight: etm-perf: Support PID tracing for kernel at EL2
  coresight: etm-perf: Clarify comment on perf options
  ACRN: update MAINTAINERS: mailing list is subscribers-only
  regmap: sdw-mbq: use MODULE_LICENSE("GPL")
  regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
  regmap: sdw: use _no_pm functions in regmap_read/write
  soundwire: intel: fix possible crash when no device is detected
  MAINTAINERS: replace my with email with replacements
  mhi: Fix double dma free
  uapi: map_to_7segment: Update example in documentation
  uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
  drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
  firewire: replace tricky statement by two simple ones
  vme: make remove callback return void
  firmware: google: make coreboot driver's remove callback return void
  firmware: xilinx: Use explicit values for all enum values
  sample/acrn: Introduce a sample of HSM ioctl interface usage
  virt: acrn: Introduce an interface for Service VM to control vCPU
  ...

2 files changed, 41 insertions, 15 deletions

diff --git a/Documentation/ABI/stable/sysfs-bus-fsl-mc b/Documentation/ABI/stable/sysfs-bus-fsl-mc
new file mode 100644
index 0000000000000..58f06c7eeed72
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-fsl-mc
@@ -0,0 +1,19 @@
+What:		/sys/bus/fsl-mc/rescan
+Date:		January 2021
+KernelVersion:	5.12
+Contact:	Ioana Ciornei <ioana.ciornei@nxp.com>
+Description:	Writing a non-zero value to this attribute will
+		force a rescan of fsl-mc bus in the system and
+		synchronize the objects under fsl-mc bus and the
+		Management Complex firmware.
+Users:		Userspace drivers and management tools
+
+What:		/sys/bus/fsl-mc/autorescan
+Date:		January 2021
+KernelVersion:	5.12
+Contact:	Ioana Ciornei <ioana.ciornei@nxp.com>
+Description:	Writing a zero value to this attribute will
+		disable the DPRC IRQs on which automatic rescan
+		of the fsl-mc bus is performed. A non-zero value
+		will enable the DPRC IRQs.
+Users:		Userspace drivers and management tools
diff --git a/Documentation/ABI/stable/sysfs-driver-speakup b/Documentation/ABI/stable/sysfs-driver-speakup
index 792f58ba327d3..dc2a6ba1674b8 100644
--- a/Documentation/ABI/stable/sysfs-driver-speakup
+++ b/Documentation/ABI/stable/sysfs-driver-speakup
@@ -273,7 +273,7 @@ Description:	In `/sys/accessibility/speakup` is a directory corresponding to
 		Below is a description of values and  parameters for soft
 		synthesizer, which is currently the most commonly used.
 
-What:		/sys/accessibility/speakup/soft/caps_start
+What:		/sys/accessibility/speakup/<synth-name>/caps_start
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	This is the string that is sent to the synthesizer to cause it
@@ -281,7 +281,7 @@ Description:	This is the string that is sent to the synthesizer to cause it
 		and most others, this causes the pitch of the voice to rise
 		above the currently set pitch.
 
-What:		/sys/accessibility/speakup/soft/caps_stop
+What:		/sys/accessibility/speakup/<synth-name>/caps_stop
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	This is the string sent to the synthesizer to cause it to stop
@@ -290,12 +290,12 @@ Description:	This is the string sent to the synthesizer to cause it to stop
 		down to the
 		currently set pitch.
 
-What:		/sys/accessibility/speakup/soft/delay_time
+What:		/sys/accessibility/speakup/<synth-name>/delay_time
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	TODO:
 
-What:		/sys/accessibility/speakup/soft/direct
+What:		/sys/accessibility/speakup/<synth-name>/direct
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Controls if punctuation is spoken by speakup, or by the
@@ -306,36 +306,43 @@ Description:	Controls if punctuation is spoken by speakup, or by the
 		than". Zero lets speakup speak the punctuation. One lets the
 		synthesizer itself speak punctuation.
 
-What:		/sys/accessibility/speakup/soft/freq
+What:		/sys/accessibility/speakup/<synth-name>/freq
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Gets or sets the frequency of the speech synthesizer. Range is
 		0-9.
 
-What:		/sys/accessibility/speakup/soft/full_time
+What:		/sys/accessibility/speakup/<synth-name>/flush_time
+KernelVersion:	5.12
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the timeout to wait for the synthesizer flush to
+		complete. This can be used when the cable gets faulty and flush
+		notifications are getting lost.
+
+What:		/sys/accessibility/speakup/<synth-name>/full_time
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	TODO:
 
-What:		/sys/accessibility/speakup/soft/jiffy_delta
+What:		/sys/accessibility/speakup/<synth-name>/jiffy_delta
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	This controls how many jiffys the kernel gives to the
 		synthesizer. Setting this too high can make a system unstable,
 		or even crash it.
 
-What:		/sys/accessibility/speakup/soft/pitch
+What:		/sys/accessibility/speakup/<synth-name>/pitch
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Gets or sets the pitch of the synthesizer. The range is 0-9.
 
-What:		/sys/accessibility/speakup/soft/inflection
+What:		/sys/accessibility/speakup/<synth-name>/inflection
 KernelVersion:	5.8
 Contact:	speakup@linux-speakup.org
 Description:	Gets or sets the inflection of the synthesizer, i.e. the pitch
 		range. The range is 0-9.
 
-What:		/sys/accessibility/speakup/soft/punct
+What:		/sys/accessibility/speakup/<synth-name>/punct
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Gets or sets the amount of punctuation spoken by the
@@ -343,13 +350,13 @@ Description:	Gets or sets the amount of punctuation spoken by the
 		TODO: How is this related to speakup's punc_level, or
 		reading_punc.
 
-What:		/sys/accessibility/speakup/soft/rate
+What:		/sys/accessibility/speakup/<synth-name>/rate
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Gets or sets the rate of the synthesizer. Range is from zero
 		slowest, to nine fastest.
 
-What:		/sys/accessibility/speakup/soft/tone
+What:		/sys/accessibility/speakup/<synth-name>/tone
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Gets or sets the tone of the speech synthesizer. The range for
@@ -357,12 +364,12 @@ Description:	Gets or sets the tone of the speech synthesizer. The range for
 		difference if using espeak and the espeakup connector.
 		TODO: does espeakup support different tonalities?
 
-What:		/sys/accessibility/speakup/soft/trigger_time
+What:		/sys/accessibility/speakup/<synth-name>/trigger_time
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	TODO:
 
-What:		/sys/accessibility/speakup/soft/voice
+What:		/sys/accessibility/speakup/<synth-name>/voice
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Gets or sets the voice used by the synthesizer if the
@@ -371,7 +378,7 @@ Description:	Gets or sets the voice used by the synthesizer if the
 		voices, this parameter will not set the voice when the espeakup
 		connector is used  between speakup and espeak.
 
-What:		/sys/accessibility/speakup/soft/vol
+What:		/sys/accessibility/speakup/<synth-name>/vol
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Gets or sets the volume of the speech synthesizer. Range is 0-9,