aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGergo Koteles <soyer@irl.hu>2024-03-26 17:18:45 +0100
committerTakashi Iwai <tiwai@suse.de>2024-03-27 11:19:11 +0100
commitae065d0ce9e36ca4efdfb9b96ce3395bd1c19372 (patch)
tree4163b88eca4aca616c5810f290999333589932ab
parent7590ac2249ebfa6a40db9055fa62d349e9c8e6a6 (diff)
downloadlinux-ae065d0ce9e36ca4efdfb9b96ce3395bd1c19372.tar.gz
ALSA: hda/tas2781: remove digital gain kcontrol
The "Speaker Digital Gain" kcontrol controls the TAS2781_DVC_LVL (0x1A) register. Unfortunately the tas2563 does not have DVC_LVL, but has INT_MASK0 in 0x1A, which has been misused so far. Since commit c1947ce61ff4 ("ALSA: hda/realtek: tas2781: enable subwoofer volume control") the volume of the tas2781 amplifiers can be controlled by the master volume, so this digital gain kcontrol is not needed. Remove it. Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Message-ID: <741fc21db994efd58f83e7aef38931204961e5b2.1711469583.git.soyer@irl.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-rw-r--r--sound/pci/hda/tas2781_hda_i2c.c37
1 files changed, 1 insertions, 36 deletions
diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index 4475cea8e9f70..5acb475c10a72 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -89,7 +89,7 @@ struct tas2781_hda {
struct snd_kcontrol *dsp_prog_ctl;
struct snd_kcontrol *dsp_conf_ctl;
struct snd_kcontrol *prof_ctl;
- struct snd_kcontrol *snd_ctls[3];
+ struct snd_kcontrol *snd_ctls[2];
};
static int tas2781_get_i2c_res(struct acpi_resource *ares, void *data)
@@ -294,27 +294,6 @@ static int tasdevice_config_put(struct snd_kcontrol *kcontrol,
return ret;
}
-/*
- * tas2781_digital_getvol - get the volum control
- * @kcontrol: control pointer
- * @ucontrol: User data
- * Customer Kcontrol for tas2781 is primarily for regmap booking, paging
- * depends on internal regmap mechanism.
- * tas2781 contains book and page two-level register map, especially
- * book switching will set the register BXXP00R7F, after switching to the
- * correct book, then leverage the mechanism for paging to access the
- * register.
- */
-static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
-
- return tasdevice_digital_getvol(tas_priv, ucontrol, mc);
-}
-
static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -325,17 +304,6 @@ static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol,
return tasdevice_amp_getvol(tas_priv, ucontrol, mc);
}
-static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
-
- /* The check of the given value is in tasdevice_digital_putvol. */
- return tasdevice_digital_putvol(tas_priv, ucontrol, mc);
-}
-
static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -381,9 +349,6 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = {
ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL,
1, 0, 20, 0, tas2781_amp_getvol,
tas2781_amp_putvol, amp_vol_tlv),
- ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2781_DVC_LVL,
- 0, 0, 200, 1, tas2781_digital_getvol,
- tas2781_digital_putvol, dvc_tlv),
ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0,
tas2781_force_fwload_get, tas2781_force_fwload_put),
};