diff options
| author | MD Danish Anwar <danishanwar@ti.com> | 2024-04-23 14:18:28 +0530 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2024-04-25 11:25:07 +0100 |
| commit | 6c9cd59dbcb09a2122b5ce0dfc07c74e6fc00dc0 (patch) | |
| tree | dbf60f77df7f2fe04bc937e80bca8c80004a04a4 | |
| parent | e6b219014fb3a2601b66086a551b7363ace8dd28 (diff) | |
| download | linux-6c9cd59dbcb09a2122b5ce0dfc07c74e6fc00dc0.tar.gz | |
net: phy: dp83869: Fix MII mode failure
The DP83869 driver sets the MII bit (needed for PHY to work in MII mode)
only if the op-mode is either DP83869_100M_MEDIA_CONVERT or
DP83869_RGMII_100_BASE.
Some drivers i.e. ICSSG support MII mode with op-mode as
DP83869_RGMII_COPPER_ETHERNET for which the MII bit is not set in dp83869
driver. As a result MII mode on ICSSG doesn't work and below log is seen.
TI DP83869 300b2400.mdio:0f: selected op-mode is not valid with MII mode
icssg-prueth icssg1-eth: couldn't connect to phy ethernet-phy@0
icssg-prueth icssg1-eth: can't phy connect port MII0
Fix this by setting MII bit for DP83869_RGMII_COPPER_ETHERNET op-mode as
well.
Fixes: 94e86ef1b801 ("net: phy: dp83869: support mii mode when rgmii strap cfg is used")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/phy/dp83869.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c index fa8c6fdcf3018..d7aaefb5226b6 100644 --- a/drivers/net/phy/dp83869.c +++ b/drivers/net/phy/dp83869.c @@ -695,7 +695,8 @@ static int dp83869_configure_mode(struct phy_device *phydev, phy_ctrl_val = dp83869->mode; if (phydev->interface == PHY_INTERFACE_MODE_MII) { if (dp83869->mode == DP83869_100M_MEDIA_CONVERT || - dp83869->mode == DP83869_RGMII_100_BASE) { + dp83869->mode == DP83869_RGMII_100_BASE || + dp83869->mode == DP83869_RGMII_COPPER_ETHERNET) { phy_ctrl_val |= DP83869_OP_MODE_MII; } else { phydev_err(phydev, "selected op-mode is not valid with MII mode\n"); |