diff options
| author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2006-01-12 16:51:16 -0800 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@pobox.com> | 2006-01-17 07:48:03 -0500 |
| commit | 1e613fd9d64aba9945ddb3b7f1107127ee8a9835 (patch) | |
| tree | aa6de84f7790d96daffcb20a6ffc22ee498db724 | |
| parent | e8da8be146e6043fb4b60a222be0014a0fb46d24 (diff) | |
| download | linux-1e613fd9d64aba9945ddb3b7f1107127ee8a9835.tar.gz | |
[PATCH] e1000: Added interrupt auto mask support
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| -rw-r--r-- | drivers/net/e1000/e1000_main.c | 31 |
1 files changed, 25 insertions, 6 deletions
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6d7f9c9df08521..53f87fe511c5e2 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1736,10 +1736,15 @@ e1000_configure_rx(struct e1000_adapter *adapter) } if (hw->mac_type >= e1000_82571) { - /* Reset delay timers after every interrupt */ ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + /* Reset delay timers after every interrupt */ ctrl_ext |= E1000_CTRL_EXT_CANC; +#ifdef CONFIG_E1000_NAPI + /* Auto-Mask interrupts upon ICR read. */ + ctrl_ext |= E1000_CTRL_EXT_IAME; +#endif E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + E1000_WRITE_REG(hw, IAM, ~0); E1000_WRITE_FLUSH(hw); } @@ -3244,12 +3249,24 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint32_t icr = E1000_READ_REG(hw, ICR); -#if defined(CONFIG_E1000_NAPI) && defined(CONFIG_E1000_MQ) || !defined(CONFIG_E1000_NAPI) +#ifndef CONFIG_E1000_NAPI int i; +#else + /* Interrupt Auto-Mask...upon reading ICR, + * interrupts are masked. No need for the + * IMC write, but it does mean we should + * account for it ASAP. */ + if (likely(hw->mac_type >= e1000_82571)) + atomic_inc(&adapter->irq_sem); #endif - if(unlikely(!icr)) + if (unlikely(!icr)) { +#ifdef CONFIG_E1000_NAPI + if (hw->mac_type >= e1000_82571) + e1000_irq_enable(adapter); +#endif return IRQ_NONE; /* Not our interrupt */ + } if(unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) { hw->get_link_status = 1; @@ -3257,9 +3274,11 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) } #ifdef CONFIG_E1000_NAPI - atomic_inc(&adapter->irq_sem); - E1000_WRITE_REG(hw, IMC, ~0); - E1000_WRITE_FLUSH(hw); + if (unlikely(hw->mac_type < e1000_82571)) { + atomic_inc(&adapter->irq_sem); + E1000_WRITE_REG(hw, IMC, ~0); + E1000_WRITE_FLUSH(hw); + } #ifdef CONFIG_E1000_MQ if (atomic_read(&adapter->rx_sched_call_data.count) == 0) { /* We must setup the cpumask once count == 0 since |