diff options
| author | Dave Gerlach <d-gerlach@ti.com> | 2019-04-02 11:57:43 -0500 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2019-04-09 08:32:12 -0700 |
| commit | 11140cc40ddc3e7a2f2e3352e8a0587a93ba75df (patch) | |
| tree | 61157e7e2702f39ae8fe6e2e29024b5d27d17336 | |
| parent | 6c110561eb2d4d1496961c13a92f96f29eea7c72 (diff) | |
| download | linux-omap-omap-for-v5.2/am4-ddr3.tar.gz | |
ARM: OMAP2+: sleep43xx: Run EMIF HW leveling on resume pathomap-for-v5.2/am4-ddr3
When returning from DeepSleep mode on AM437x platforms the EMIF must run
DDR hardware leveling, same as done during u-boot, to properly restore the
EMIF PHY to it's operational state on platforms using DDR3.
Call the ti-emif-sram-pm run_hw_leveling routine to perform this. This
happens after all other EMIF values are restored so the exact same
configuration used at boot is used at the end of EMIF resume as well.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
| -rw-r--r-- | arch/arm/mach-omap2/sleep43xx.S | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S index 5b9343b58fc70..0c1031442571f 100644 --- a/arch/arm/mach-omap2/sleep43xx.S +++ b/arch/arm/mach-omap2/sleep43xx.S @@ -368,6 +368,9 @@ wait_emif_enable1: mov r1, #AM43XX_EMIF_POWEROFF_DISABLE str r1, [r2, #0x0] + ldr r1, [r9, #EMIF_PM_RUN_HW_LEVELING] + blx r1 + #ifdef CONFIG_CACHE_L2X0 ldr r2, l2_cache_base ldr r0, [r2, #L2X0_CTRL] |