[PATCH] Remove ppc32 proc_rtas.c

This patch removes proc_rtas.c and error_log.[ch] from
arch/ppc/platforms.  It turns out that the code in error_log.[ch] is
completely unused, and the code in proc_rtas.c is buggy, almost
impossible to understand, and rarely used.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

5 files changed, 0 insertions, 1100 deletions

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 032168b86a4991..cc4e6b9db7733f 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -825,39 +825,6 @@ config PROC_DEVICETREE
 	  an image of the device tree that the kernel copies from Open
 	  Firmware. If unsure, say Y here.
 
-config PPC_RTAS
-	bool "Support for RTAS (RunTime Abstraction Services) in /proc"
-	depends on PPC_OF && PROC_FS
-	---help---
-	  When you use this option, you will be able to use RTAS from
-	  userspace.
-
-	  RTAS stands for RunTime Abstraction Services and should
-	  provide a portable way to access and set system information. This is
-	  commonly used on RS/6000 (pSeries) computers.
-
-	  You can access RTAS via the special proc file system entry rtas.
-	  Don't confuse this rtas entry with the one in /proc/device-tree/rtas
-	  which is readonly.
-
-	  If you don't know if you can use RTAS look into
-	  /proc/device-tree/rtas. If there are some entries, it is very likely
-	  that you will be able to use RTAS.
-
-	  You can do cool things with rtas. To print out information about
-	  various sensors in the system, just do a
-
-	  $ cat /proc/rtas/sensors
-
-	  or if you power off your machine at night but want it running when
-	  you enter your office at 7:45 am, do a
-
-	  # date -d 'tomorrow 7:30' +%s > /proc/rtas/poweron
-
-	  and shutdown.
-
-	  If unsure, say Y.
-
 config PREP_RESIDUAL
 	bool "Support for PReP Residual Data"
 	depends on PPC_PREP
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index 334015b3cf2858..dd7cd0cd40cba2 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_NVRAM)		+= pmac_nvram.o
 obj-$(CONFIG_CPU_FREQ_PMAC)	+= pmac_cpufreq.o
 endif
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= pmac_backlight.o
-obj-$(CONFIG_PPC_RTAS)		+= error_log.o proc_rtas.o
 obj-$(CONFIG_PREP_RESIDUAL)	+= residual.o
 obj-$(CONFIG_ADIR)		+= adir_setup.o adir_pic.o adir_pci.o
 obj-$(CONFIG_EST8260)		+= est8260_setup.o
diff --git a/arch/ppc/platforms/error_log.c b/arch/ppc/platforms/error_log.c
deleted file mode 100644
index 4a71e1885fd2b1..00000000000000
--- a/arch/ppc/platforms/error_log.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- *  arch/ppc/kernel/error_log.c
- *
- *  Copyright (c) 2000 Tilmann Bitterberg
- *  (tilmann@bitterberg.de)
- *
- *  Error processing of errors found by rtas even-scan routine
- *  which is done with every heartbeat. (chrp_setup.c)
- */
-
-#include <linux/sched.h>
-
-#include <asm/prom.h>
-
-#include "error_log.h"
-
-/* ****************************************************************** */
-/*
- * EVENT-SCAN
- * The whole stuff below here doesn't take any action when it found
- * an error, it just prints as much information as possible and
- * then its up to the user to decide what to do.
- *
- * Returns 0 if no errors were found
- * Returns 1 if there may be more errors
- */
-int ppc_rtas_errorlog_scan(void)
-{
-const char *_errlog_severity[] = {
-#ifdef VERBOSE_ERRORS
-	"No Error\n\t\
-Should require no further information",
-	"Event\n\t\
-This is not really an error, it is an event. I use events\n\t\
-to communicate with RTAS back and forth.",
-	"Warning\n\t\
-Indicates a non-state-losing error, either fully recovered\n\t\
-by RTAS or not needing recovery. Ignore it.",
-	"Error sync\n\t\
-May only be fatal to a certain program or thread. Recovery\n\t\
-and continuation is possible, if I only had a handler for\n\t\
-this. Less serious",
-	"Error\n\t\
-Less serious, but still causing a loss of data and state.\n\t\
-I can't tell you exactly what to do, You have to decide\n\t\
-with help from the target and initiator field, what kind\n\t\
-of further actions may take place.",
-	"Fatal\n\t\
-Represent a permanent hardware failure and I believe this\n\t\
-affects my overall performance and behaviour. I would not\n\t\
-attempt to continue normal operation."
-#else
-	"No Error",
-	"Event",
-	"Warning",
-	"Error sync",
-	"Error",
-	"Fatal"
-#endif /* VERBOSE_ERRORS */
-};
-
-#if 0 /* unused?? */
-const char *_errlog_disposition[] = {
-#ifdef VERBOSE_ERRORS
-	"Fully recovered\n\t\
-There was an error, but it is fully recovered by RTAS.",
-	"Limited recovery\n\t\
-RTAS was able to recover the state of the machine, but some\n\t\
-feature of the machine has been disabled or lost (for example\n\t\
-error checking) or performance may suffer.",
-	"Not recovered\n\t\
-Whether RTAS did not try to recover anything or recovery failed:\n\t\
-HOUSTON, WE HAVE A PROBLEM!"
-#else
-	"Fully recovered",
-	"Limited recovery",
-	"Not recovered"
-#endif /* VERBOSE_ERRORS */
-};
-#endif
-
-const char *_errlog_extended[] = {
-#ifdef VERBOSE_ERRORS
-	"Not present\n\t\
-Sad, the RTAS call didn't return an extended error log.",
-	"Present\n\t\
-The extended log is present and hopefully it contains a lot of\n\t\
-useful information, which leads to the solution of the problem."
-#else
-	"Not present",
-	"Present"
-#endif /* VERBOSE_ERRORS */
-};
-
-const char *_errlog_initiator[] = {
-	"Unknown or not applicable",
-	"CPU",
-	"PCI",
-	"ISA",
-	"Memory",
-	"Power management"
-};
-
-const char *_errlog_target[] = {
-	"Unknown or not applicable",
-	"CPU",
-	"PCI",
-	"ISA",
-	"Memory",
-	"Power management"
-};
-	rtas_error_log error_log;
-	char logdata[1024];
-	int error;
-#if 0 /* unused?? */
-	int retries = 0; /* if HW error, try 10 times */
-#endif
-
-	error = call_rtas ("event-scan", 4, 1, (unsigned long *)&error_log,
-			INTERNAL_ERROR | EPOW_WARNING,
-			0, __pa(logdata), 1024);
-
-	if (error == 1) /* no errors found */
-		return 0;
-
-	if (error == -1) {
-		printk(KERN_ERR "Unable to get errors. Do you a favor and throw this box away\n");
-		return 0;
-	}
-	if (error_log.version != 1)
-		printk(KERN_WARNING "Unknown version (%d), please implement me\n",
-				error_log.version);
-
-	switch (error_log.disposition) {
-		case DISP_FULLY_RECOVERED:
-			/* there was an error, but everything is fine now */
-			return 0;
-		case DISP_NOT_RECOVERED:
-			printk("We have a really serious Problem!\n");
-		case DISP_LIMITED_RECOVERY:
-			printk("Error classification\n");
-			printk("Severity  : %s\n",
-					ppc_rtas_errorlog_check_severity (error_log));
-			printk("Initiator : %s\n",
-					ppc_rtas_errorlog_check_initiator (error_log));
-			printk("Target    : %s\n",
-					ppc_rtas_errorlog_check_target (error_log));
-			printk("Type      : %s\n",
-					ppc_rtas_errorlog_check_type (error_log));
-			printk("Ext. log  : %s\n",
-					ppc_rtas_errorlog_check_extended (error_log));
-			if (error_log.extended)
-				ppc_rtas_errorlog_disect_extended (logdata);
-			return 1;
-		default:
-			/* nothing */
-			break;
-	}
-	return 0;
-}
-/* ****************************************************************** */
-const char * ppc_rtas_errorlog_check_type (rtas_error_log error_log)
-{
-	const char *_errlog_type[] = {
-		"unknown type",
-		"too many tries failed",
-		"TCE error",
-		"RTAS device failed",
-		"target timed out",
-		"parity error on data",			/* 5 */
-		"parity error on address",
-		"parity error on external cache",
-		"access to invalid address",
-		"uncorrectable ECC error",
-		"corrected ECC error"			/* 10 */
-	};
-	if (error_log.type == TYPE_EPOW)
-		return "EPOW";
-	if (error_log.type >= TYPE_PMGM_POWER_SW_ON)
-		return "PowerMGM Event (not handled right now)";
-	return _errlog_type[error_log.type];
-}
-
diff --git a/arch/ppc/platforms/error_log.h b/arch/ppc/platforms/error_log.h
deleted file mode 100644
index b8226aef3d4aa7..00000000000000
--- a/arch/ppc/platforms/error_log.h
+++ /dev/null
@@ -1,95 +0,0 @@
-#ifndef __ERROR_LOG_H__
-#define __ERROR_LOG_H__
-
-#define VERBOSE_ERRORS		1 /* Maybe I enlarge the kernel too much */
-#undef VERBOSE_ERRORS
-
-/* Event classes */
-/* XXX: Endianess correct? NOW*/
-#define INTERNAL_ERROR		0x80000000 /* set bit 0 */
-#define EPOW_WARNING		0x40000000 /* set bit 1 */
-#define POWERMGM_EVENTS		0x20000000 /* set bit 2 */
-
-/* event-scan returns */
-#define SEVERITY_FATAL		0x5
-#define SEVERITY_ERROR		0x4
-#define SEVERITY_ERROR_SYNC	0x3
-#define SEVERITY_WARNING	0x2
-#define SEVERITY_EVENT		0x1
-#define SEVERITY_NO_ERROR	0x0
-#define DISP_FULLY_RECOVERED	0x0
-#define DISP_LIMITED_RECOVERY	0x1
-#define DISP_NOT_RECOVERED	0x2
-#define PART_PRESENT		0x0
-#define PART_NOT_PRESENT	0x1
-#define INITIATOR_UNKNOWN	0x0
-#define INITIATOR_CPU		0x1
-#define INITIATOR_PCI		0x2
-#define INITIATOR_ISA		0x3
-#define INITIATOR_MEMORY	0x4
-#define INITIATOR_POWERMGM	0x5
-#define TARGET_UNKNOWN		0x0
-#define TARGET_CPU		0x1
-#define TARGET_PCI		0x2
-#define TARGET_ISA		0x3
-#define TARGET_MEMORY		0x4
-#define TARGET_POWERMGM		0x5
-#define TYPE_RETRY		0x01
-#define TYPE_TCE_ERR		0x02
-#define TYPE_INTERN_DEV_FAIL	0x03
-#define TYPE_TIMEOUT		0x04
-#define TYPE_DATA_PARITY	0x05
-#define TYPE_ADDR_PARITY	0x06
-#define TYPE_CACHE_PARITY	0x07
-#define TYPE_ADDR_INVALID	0x08
-#define TYPE_ECC_UNCORR		0x09
-#define TYPE_ECC_CORR		0x0a
-#define TYPE_EPOW		0x40
-/* I don't add PowerMGM events right now, this is a different topic */
-#define TYPE_PMGM_POWER_SW_ON	0x60
-#define TYPE_PMGM_POWER_SW_OFF	0x61
-#define TYPE_PMGM_LID_OPEN	0x62
-#define TYPE_PMGM_LID_CLOSE	0x63
-#define TYPE_PMGM_SLEEP_BTN	0x64
-#define TYPE_PMGM_WAKE_BTN	0x65
-#define TYPE_PMGM_BATTERY_WARN	0x66
-#define TYPE_PMGM_BATTERY_CRIT	0x67
-#define TYPE_PMGM_SWITCH_TO_BAT	0x68
-#define TYPE_PMGM_SWITCH_TO_AC	0x69
-#define TYPE_PMGM_KBD_OR_MOUSE	0x6a
-#define TYPE_PMGM_ENCLOS_OPEN	0x6b
-#define TYPE_PMGM_ENCLOS_CLOSED	0x6c
-#define TYPE_PMGM_RING_INDICATE	0x6d
-#define TYPE_PMGM_LAN_ATTENTION	0x6e
-#define TYPE_PMGM_TIME_ALARM	0x6f
-#define TYPE_PMGM_CONFIG_CHANGE	0x70
-#define TYPE_PMGM_SERVICE_PROC	0x71
-
-typedef struct _rtas_error_log {
-	unsigned long version:8;		/* Architectural version */
-	unsigned long severity:3;		/* Severity level of error */
-	unsigned long disposition:2;		/* Degree of recovery */
-	unsigned long extended:1;		/* extended log present? */
-	unsigned long /* reserved */ :2;	/* Reserved for future use */
-	unsigned long initiator:4;		/* Initiator of event */
-	unsigned long target:4;			/* Target of failed operation */
-	unsigned long type:8;			/* General event or error*/
-	unsigned long extended_log_length:32;	/* length in bytes */
-} rtas_error_log;
-
-/* ****************************************************************** */
-#define ppc_rtas_errorlog_check_severity(x) \
-	(_errlog_severity[x.severity])
-#define ppc_rtas_errorlog_check_target(x) \
-	(_errlog_target[x.target])
-#define ppc_rtas_errorlog_check_initiator(x) \
-	(_errlog_initiator[x.initiator])
-#define ppc_rtas_errorlog_check_extended(x) \
-	(_errlog_extended[x.extended])
-#define ppc_rtas_errorlog_disect_extended(x) \
-	do { /* implement me */ } while(0)
-extern const char * ppc_rtas_errorlog_check_type (rtas_error_log error_log);
-extern int ppc_rtas_errorlog_scan(void);
-
-
-#endif /* __ERROR_LOG_H__ */
diff --git a/arch/ppc/platforms/proc_rtas.c b/arch/ppc/platforms/proc_rtas.c
deleted file mode 100644
index f24f39923916fd..00000000000000
--- a/arch/ppc/platforms/proc_rtas.c
+++ /dev/null
@@ -1,788 +0,0 @@
-/*
- *   arch/ppc/platforms/proc_rtas.c
- *   Copyright (C) 2000 Tilmann Bitterberg
- *   (tilmann@bitterberg.de)
- *
- *   RTAS (Runtime Abstraction Services) stuff
- *   Intention is to provide a clean user interface
- *   to use the RTAS.
- *
- *   TODO:
- *   Split off a header file and maybe move it to a different
- *   location. Write Documentation on what the /proc/rtas/ entries
- *   actually do.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/ctype.h>
-#include <linux/time.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/uaccess.h>
-#include <asm/bitops.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/machdep.h> /* for ppc_md */
-#include <asm/time.h>
-
-/* Token for Sensors */
-#define KEY_SWITCH		0x0001
-#define ENCLOSURE_SWITCH	0x0002
-#define THERMAL_SENSOR		0x0003
-#define LID_STATUS		0x0004
-#define POWER_SOURCE		0x0005
-#define BATTERY_VOLTAGE		0x0006
-#define BATTERY_REMAINING	0x0007
-#define BATTERY_PERCENTAGE	0x0008
-#define EPOW_SENSOR		0x0009
-#define BATTERY_CYCLESTATE	0x000a
-#define BATTERY_CHARGING	0x000b
-
-/* IBM specific sensors */
-#define IBM_SURVEILLANCE	0x2328 /* 9000 */
-#define IBM_FANRPM		0x2329 /* 9001 */
-#define IBM_VOLTAGE		0x232a /* 9002 */
-#define IBM_DRCONNECTOR		0x232b /* 9003 */
-#define IBM_POWERSUPPLY		0x232c /* 9004 */
-#define IBM_INTQUEUE		0x232d /* 9005 */
-
-/* Status return values */
-#define SENSOR_CRITICAL_HIGH	13
-#define SENSOR_WARNING_HIGH	12
-#define SENSOR_NORMAL		11
-#define SENSOR_WARNING_LOW	10
-#define SENSOR_CRITICAL_LOW	 9
-#define SENSOR_SUCCESS		 0
-#define SENSOR_HW_ERROR		-1
-#define SENSOR_BUSY		-2
-#define SENSOR_NOT_EXIST	-3
-#define SENSOR_DR_ENTITY	-9000
-
-/* Location Codes */
-#define LOC_SCSI_DEV_ADDR	'A'
-#define LOC_SCSI_DEV_LOC	'B'
-#define LOC_CPU			'C'
-#define LOC_DISKETTE		'D'
-#define LOC_ETHERNET		'E'
-#define LOC_FAN			'F'
-#define LOC_GRAPHICS		'G'
-/* reserved / not used		'H' */
-#define LOC_IO_ADAPTER		'I'
-/* reserved / not used		'J' */
-#define LOC_KEYBOARD		'K'
-#define LOC_LCD			'L'
-#define LOC_MEMORY		'M'
-#define LOC_NV_MEMORY		'N'
-#define LOC_MOUSE		'O'
-#define LOC_PLANAR		'P'
-#define LOC_OTHER_IO		'Q'
-#define LOC_PARALLEL		'R'
-#define LOC_SERIAL		'S'
-#define LOC_DEAD_RING		'T'
-#define LOC_RACKMOUNTED		'U' /* for _u_nit is rack mounted */
-#define LOC_VOLTAGE		'V'
-#define LOC_SWITCH_ADAPTER	'W'
-#define LOC_OTHER		'X'
-#define LOC_FIRMWARE		'Y'
-#define LOC_SCSI		'Z'
-
-/* Tokens for indicators */
-#define TONE_FREQUENCY		0x0001 /* 0 - 1000 (HZ)*/
-#define TONE_VOLUME		0x0002 /* 0 - 100 (%) */
-#define SYSTEM_POWER_STATE	0x0003
-#define WARNING_LIGHT		0x0004
-#define DISK_ACTIVITY_LIGHT	0x0005
-#define HEX_DISPLAY_UNIT	0x0006
-#define BATTERY_WARNING_TIME	0x0007
-#define CONDITION_CYCLE_REQUEST	0x0008
-#define SURVEILLANCE_INDICATOR	0x2328 /* 9000 */
-#define DR_ACTION		0x2329 /* 9001 */
-#define DR_INDICATOR		0x232a /* 9002 */
-/* 9003 - 9004: Vendor specific */
-#define GLOBAL_INTERRUPT_QUEUE	0x232d /* 9005 */
-/* 9006 - 9999: Vendor specific */
-
-/* other */
-#define MAX_SENSORS		 17  /* I only know of 17 sensors */
-#define MAX_LINELENGTH          256
-#define SENSOR_PREFIX		"ibm,sensor-"
-#define cel_to_fahr(x)		((x*9/5)+32)
-
-
-/* Globals */
-static struct proc_dir_entry *proc_rtas;
-static struct rtas_sensors sensors;
-static struct device_node *rtas;
-static unsigned long power_on_time = 0; /* Save the time the user set */
-static char progress_led[MAX_LINELENGTH];
-
-static unsigned long rtas_tone_frequency = 1000;
-static unsigned long rtas_tone_volume = 0;
-
-/* ****************STRUCTS******************************************* */
-struct individual_sensor {
-	unsigned int token;
-	unsigned int quant;
-};
-
-struct rtas_sensors {
-        struct individual_sensor sensor[MAX_SENSORS];
-	unsigned int quant;
-};
-
-/* ****************************************************************** */
-/* Declarations */
-static int ppc_rtas_sensor_read(char * buf, char ** start, off_t off,
-		int count, int *eof, void *data);
-static ssize_t ppc_rtas_clock_read(struct file * file, char * buf,
-		size_t count, loff_t *ppos);
-static ssize_t ppc_rtas_clock_write(struct file * file, const char * buf,
-		size_t count, loff_t *ppos);
-static ssize_t ppc_rtas_progress_read(struct file * file, char * buf,
-		size_t count, loff_t *ppos);
-static ssize_t ppc_rtas_progress_write(struct file * file, const char * buf,
-		size_t count, loff_t *ppos);
-static ssize_t ppc_rtas_poweron_read(struct file * file, char * buf,
-		size_t count, loff_t *ppos);
-static ssize_t ppc_rtas_poweron_write(struct file * file, const char * buf,
-		size_t count, loff_t *ppos);
-
-static ssize_t ppc_rtas_tone_freq_write(struct file * file, const char * buf,
-		size_t count, loff_t *ppos);
-static ssize_t ppc_rtas_tone_freq_read(struct file * file, char * buf,
-		size_t count, loff_t *ppos);
-static ssize_t ppc_rtas_tone_volume_write(struct file * file, const char * buf,
-		size_t count, loff_t *ppos);
-static ssize_t ppc_rtas_tone_volume_read(struct file * file, char * buf,
-		size_t count, loff_t *ppos);
-
-struct file_operations ppc_rtas_poweron_operations = {
-	.read =		ppc_rtas_poweron_read,
-	.write =	ppc_rtas_poweron_write
-};
-struct file_operations ppc_rtas_progress_operations = {
-	.read =		ppc_rtas_progress_read,
-	.write =	ppc_rtas_progress_write
-};
-
-struct file_operations ppc_rtas_clock_operations = {
-	.read =		ppc_rtas_clock_read,
-	.write =	ppc_rtas_clock_write
-};
-
-struct file_operations ppc_rtas_tone_freq_operations = {
-	.read =		ppc_rtas_tone_freq_read,
-	.write =	ppc_rtas_tone_freq_write
-};
-struct file_operations ppc_rtas_tone_volume_operations = {
-	.read =		ppc_rtas_tone_volume_read,
-	.write =	ppc_rtas_tone_volume_write
-};
-
-int ppc_rtas_find_all_sensors (void);
-int ppc_rtas_process_sensor(struct individual_sensor s, int state,
-		int error, char * buf);
-char * ppc_rtas_process_error(int error);
-int get_location_code(struct individual_sensor s, char * buf);
-int check_location_string (char *c, char * buf);
-int check_location (char *c, int idx, char * buf);
-
-/* ****************************************************************** */
-/* MAIN                                                               */
-/* ****************************************************************** */
-static int __init proc_rtas_init(void)
-{
-	struct proc_dir_entry *entry;
-
-	rtas = find_devices("rtas");
-	if ((rtas == 0) || (_machine != _MACH_chrp)) {
-		return 1;
-	}
-
-	proc_rtas = proc_mkdir("rtas", 0);
-	if (proc_rtas == 0)
-		return 1;
-
-	/* /proc/rtas entries */
-
-	entry = create_proc_entry("progress", S_IRUGO|S_IWUSR, proc_rtas);
-	if (entry) entry->proc_fops = &ppc_rtas_progress_operations;
-
-	entry = create_proc_entry("clock", S_IRUGO|S_IWUSR, proc_rtas);
-	if (entry) entry->proc_fops = &ppc_rtas_clock_operations;
-
-	entry = create_proc_entry("poweron", S_IWUSR|S_IRUGO, proc_rtas);
-	if (entry) entry->proc_fops = &ppc_rtas_poweron_operations;
-
-	create_proc_read_entry("sensors", S_IRUGO, proc_rtas,
-			ppc_rtas_sensor_read, NULL);
-
-	entry = create_proc_entry("frequency", S_IWUSR|S_IRUGO, proc_rtas);
-	if (entry) entry->proc_fops = &ppc_rtas_tone_freq_operations;
-
-	entry = create_proc_entry("volume", S_IWUSR|S_IRUGO, proc_rtas);
-	if (entry) entry->proc_fops = &ppc_rtas_tone_volume_operations;
-
-	return 0;
-}
-__initcall(proc_rtas_init);
-
-/* ****************************************************************** */
-/* POWER-ON-TIME                                                      */
-/* ****************************************************************** */
-static ssize_t ppc_rtas_poweron_write(struct file * file, const char * buf,
-		size_t count, loff_t *ppos)
-{
-	struct rtc_time tm;
-	unsigned long nowtime;
-	char *dest;
-	int error;
-
-	nowtime = simple_strtoul(buf, &dest, 10);
-	if (*dest != '\0' && *dest != '\n') {
-		printk("ppc_rtas_poweron_write: Invalid time\n");
-		return count;
-	}
-	power_on_time = nowtime; /* save the time */
-
-	to_tm(nowtime, &tm);
-
-	error = call_rtas("set-time-for-power-on", 7, 1, NULL,
-			tm.tm_year, tm.tm_mon, tm.tm_mday,
-			tm.tm_hour, tm.tm_min, tm.tm_sec, 0 /* nano */);
-	if (error != 0)
-		printk(KERN_WARNING "error: setting poweron time returned: %s\n",
-				ppc_rtas_process_error(error));
-	return count;
-}
-/* ****************************************************************** */
-static ssize_t ppc_rtas_poweron_read(struct file * file, char * buf,
-		size_t count, loff_t *ppos)
-{
-	int n;
-	if (power_on_time == 0)
-		n = sprintf(buf, "Power on time not set\n");
-	else
-		n = sprintf(buf, "%lu\n", power_on_time);
-
-	if (*ppos >= strlen(buf))
-		return 0;
-	if (n > strlen(buf) - *ppos)
-		n = strlen(buf) - *ppos;
-	if (n > count)
-		n = count;
-	*ppos += n;
-	return n;
-}
-
-/* ****************************************************************** */
-/* PROGRESS                                                           */
-/* ****************************************************************** */
-static ssize_t ppc_rtas_progress_write(struct file * file, const char * buf,
-		size_t count, loff_t *ppos)
-{
-	unsigned long hex;
-
-	strcpy(progress_led, buf); /* save the string */
-	/* Lets see if the user passed hexdigits */
-	hex = simple_strtoul(buf, NULL, 10);
-
-	ppc_md.progress ((char *)buf, hex);
-	return count;
-
-	/* clear the line */ /* ppc_md.progress("                   ", 0xffff);*/
-}
-/* ****************************************************************** */
-static ssize_t ppc_rtas_progress_read(struct file * file, char * buf,
-		size_t count, loff_t *ppos)
-{
-	int n = 0;
-	if (progress_led != NULL)
-		n = sprintf (buf, "%s\n", progress_led);
-	if (*ppos >= strlen(buf))
-		return 0;
-	if (n > strlen(buf) - *ppos)
-		n = strlen(buf) - *ppos;
-	if (n > count)
-		n = count;
-	*ppos += n;
-	return n;
-}
-
-/* ****************************************************************** */
-/* CLOCK                                                              */
-/* ****************************************************************** */
-static ssize_t ppc_rtas_clock_write(struct file * file, const char * buf,
-		size_t count, loff_t *ppos)
-{
-	struct rtc_time tm;
-	unsigned long nowtime;
-	char *dest;
-	int error;
-
-	nowtime = simple_strtoul(buf, &dest, 10);
-	if (*dest != '\0' && *dest != '\n') {
-		printk("ppc_rtas_clock_write: Invalid time\n");
-		return count;
-	}
-
-	to_tm(nowtime, &tm);
-	error = call_rtas("set-time-of-day", 7, 1, NULL,
-			tm.tm_year, tm.tm_mon, tm.tm_mday,
-			tm.tm_hour, tm.tm_min, tm.tm_sec, 0);
-	if (error != 0)
-		printk(KERN_WARNING "error: setting the clock returned: %s\n",
-				ppc_rtas_process_error(error));
-	return count;
-}
-/* ****************************************************************** */
-static ssize_t ppc_rtas_clock_read(struct file * file, char * buf,
-		size_t count, loff_t *ppos)
-{
-	unsigned int year, mon, day, hour, min, sec;
-	unsigned long *ret = kmalloc(4*8, GFP_KERNEL);
-	int n, error;
-
-	error = call_rtas("get-time-of-day", 0, 8, ret);
-
-	year = ret[0]; mon  = ret[1]; day  = ret[2];
-	hour = ret[3]; min  = ret[4]; sec  = ret[5];
-
-	if (error != 0){
-		printk(KERN_WARNING "error: reading the clock returned: %s\n",
-				ppc_rtas_process_error(error));
-		n = sprintf (buf, "0");
-	} else {
-		n = sprintf (buf, "%lu\n", mktime(year, mon, day, hour, min, sec));
-	}
-	kfree(ret);
-
-	if (*ppos >= strlen(buf))
-		return 0;
-	if (n > strlen(buf) - *ppos)
-		n = strlen(buf) - *ppos;
-	if (n > count)
-		n = count;
-	*ppos += n;
-	return n;
-}
-
-/* ****************************************************************** */
-/* SENSOR STUFF                                                       */
-/* ****************************************************************** */
-static int ppc_rtas_sensor_read(char * buf, char ** start, off_t off,
-		int count, int *eof, void *data)
-{
-	int i,j,n;
-	unsigned long ret;
-	int state, error;
-	char buffer[MAX_LINELENGTH*MAX_SENSORS]; /* May not be enough */
-
-	if (count < 0)
-		return -EINVAL;
-
-	n  = sprintf ( buffer  , "RTAS (RunTime Abstraction Services) Sensor Information\n");
-	n += sprintf ( buffer+n, "Sensor\t\tValue\t\tCondition\tLocation\n");
-	n += sprintf ( buffer+n, "********************************************************\n");
-
-	if (ppc_rtas_find_all_sensors() != 0) {
-		n += sprintf ( buffer+n, "\nNo sensors are available\n");
-		goto return_string;
-	}
-
-	for (i=0; i<sensors.quant; i++) {
-		j = sensors.sensor[i].quant;
-		/* A sensor may have multiple instances */
-		while (j >= 0) {
-			error =	call_rtas("get-sensor-state", 2, 2, &ret,
-				  sensors.sensor[i].token, sensors.sensor[i].quant-j);
-			state = (int) ret;
-			n += ppc_rtas_process_sensor(sensors.sensor[i], state, error, buffer+n );
-			n += sprintf (buffer+n, "\n");
-			j--;
-		} /* while */
-	} /* for */
-
-return_string:
-	if (off >= strlen(buffer)) {
-		*eof = 1;
-		return 0;
-	}
-	if (n > strlen(buffer) - off)
-		n = strlen(buffer) - off;
-	if (n > count)
-		n = count;
-	else
-		*eof = 1;
-	memcpy(buf, buffer + off, n);
-	*start = buf;
-	return n;
-}
-
-/* ****************************************************************** */
-
-int ppc_rtas_find_all_sensors (void)
-{
-	unsigned long *utmp;
-	int len, i, j;
-
-	utmp = (unsigned long *) get_property(rtas, "rtas-sensors", &len);
-	if (utmp == NULL) {
-		printk (KERN_ERR "error: could not get rtas-sensors\n");
-		return 1;
-	}
-
-	sensors.quant = len / 8;      /* int + int */
-
-	for (i=0, j=0; j<sensors.quant; i+=2, j++) {
-		sensors.sensor[j].token = utmp[i];
-		sensors.sensor[j].quant = utmp[i+1];
-	}
-	return 0;
-}
-
-/* ****************************************************************** */
-/*
- * Builds a string of what rtas returned
- */
-char * ppc_rtas_process_error(int error)
-{
-	switch (error) {
-		case SENSOR_CRITICAL_HIGH:
-			return "(critical high)";
-		case SENSOR_WARNING_HIGH:
-			return "(warning high)";
-		case SENSOR_NORMAL:
-			return "(normal)";
-		case SENSOR_WARNING_LOW:
-			return "(warning low)";
-		case SENSOR_CRITICAL_LOW:
-			return "(critical low)";
-		case SENSOR_SUCCESS:
-			return "(read ok)";
-		case SENSOR_HW_ERROR:
-			return "(hardware error)";
-		case SENSOR_BUSY:
-			return "(busy)";
-		case SENSOR_NOT_EXIST:
-			return "(non existant)";
-		case SENSOR_DR_ENTITY:
-			return "(dr entity removed)";
-		default:
-			return "(UNKNOWN)";
-	}
-}
-
-/* ****************************************************************** */
-/*
- * Builds a string out of what the sensor said
- */
-
-int ppc_rtas_process_sensor(struct individual_sensor s, int state,
-		int error, char * buf)
-{
-	/* Defined return vales */
-	const char * key_switch[]        = { "Off\t", "Normal\t", "Secure\t", "Mainenance" };
-	const char * enclosure_switch[]  = { "Closed", "Open" };
-	const char * lid_status[]        = { " ", "Open", "Closed" };
-	const char * power_source[]      = { "AC\t", "Battery", "AC & Battery" };
-	const char * battery_remaining[] = { "Very Low", "Low", "Mid", "High" };
-	const char * epow_sensor[]       = {
-		"EPOW Reset", "Cooling warning", "Power warning",
-		"System shutdown", "System halt", "EPOW main enclosure",
-		"EPOW power off" };
-	const char * battery_cyclestate[]  = { "None", "In progress", "Requested" };
-	const char * battery_charging[]    = { "Charging", "Discharching", "No current flow" };
-	const char * ibm_drconnector[]     = { "Empty", "Present" };
-	const char * ibm_intqueue[]        = { "Disabled", "Enabled" };
-
-	int have_strings = 0;
-	int temperature = 0;
-	int unknown = 0;
-	int n = 0;
-
-	/* What kind of sensor do we have here? */
-	switch (s.token) {
-		case KEY_SWITCH:
-			n += sprintf(buf+n, "Key switch:\t");
-			n += sprintf(buf+n, "%s\t", key_switch[state]);
-			have_strings = 1;
-			break;
-		case ENCLOSURE_SWITCH:
-			n += sprintf(buf+n, "Enclosure switch:\t");
-			n += sprintf(buf+n, "%s\t", enclosure_switch[state]);
-			have_strings = 1;
-			break;
-		case THERMAL_SENSOR:
-			n += sprintf(buf+n, "Temp. (°C/°F):\t");
-			temperature = 1;
-			break;
-		case LID_STATUS:
-			n += sprintf(buf+n, "Lid status:\t");
-			n += sprintf(buf+n, "%s\t", lid_status[state]);
-			have_strings = 1;
-			break;
-		case POWER_SOURCE:
-			n += sprintf(buf+n, "Power source:\t");
-			n += sprintf(buf+n, "%s\t", power_source[state]);
-			have_strings = 1;
-			break;
-		case BATTERY_VOLTAGE:
-			n += sprintf(buf+n, "Battery voltage:\t");
-			break;
-		case BATTERY_REMAINING:
-			n += sprintf(buf+n, "Battery remaining:\t");
-			n += sprintf(buf+n, "%s\t", battery_remaining[state]);
-			have_strings = 1;
-			break;
-		case BATTERY_PERCENTAGE:
-			n += sprintf(buf+n, "Battery percentage:\t");
-			break;
-		case EPOW_SENSOR:
-			n += sprintf(buf+n, "EPOW Sensor:\t");
-			n += sprintf(buf+n, "%s\t", epow_sensor[state]);
-			have_strings = 1;
-			break;
-		case BATTERY_CYCLESTATE:
-			n += sprintf(buf+n, "Battery cyclestate:\t");
-			n += sprintf(buf+n, "%s\t", battery_cyclestate[state]);
-			have_strings = 1;
-			break;
-		case BATTERY_CHARGING:
-			n += sprintf(buf+n, "Battery Charging:\t");
-			n += sprintf(buf+n, "%s\t", battery_charging[state]);
-			have_strings = 1;
-			break;
-		case IBM_SURVEILLANCE:
-			n += sprintf(buf+n, "Surveillance:\t");
-			break;
-		case IBM_FANRPM:
-			n += sprintf(buf+n, "Fan (rpm):\t");
-			break;
-		case IBM_VOLTAGE:
-			n += sprintf(buf+n, "Voltage (mv):\t");
-			break;
-		case IBM_DRCONNECTOR:
-			n += sprintf(buf+n, "DR connector:\t");
-			n += sprintf(buf+n, "%s\t", ibm_drconnector[state]);
-			have_strings = 1;
-			break;
-		case IBM_POWERSUPPLY:
-			n += sprintf(buf+n, "Powersupply:\t");
-			break;
-		case IBM_INTQUEUE:
-			n += sprintf(buf+n, "Interrupt queue:\t");
-			n += sprintf(buf+n, "%s\t", ibm_intqueue[state]);
-			have_strings = 1;
-			break;
-		default:
-			n += sprintf(buf+n,  "Unkown sensor (type %d), ignoring it\n",
-					s.token);
-			unknown = 1;
-			have_strings = 1;
-			break;
-	}
-	if (have_strings == 0) {
-		if (temperature) {
-			n += sprintf(buf+n, "%4d /%4d\t", state, cel_to_fahr(state));
-		} else
-			n += sprintf(buf+n, "%10d\t", state);
-	}
-	if (unknown == 0) {
-		n += sprintf ( buf+n, "%s\t", ppc_rtas_process_error(error));
-		n += get_location_code(s, buf+n);
-	}
-	return n;
-}
-
-/* ****************************************************************** */
-
-int check_location (char *c, int idx, char * buf)
-{
-	int n = 0;
-
-	switch (*(c+idx)) {
-		case LOC_PLANAR:
-			n += sprintf ( buf, "Planar #%c", *(c+idx+1));
-			break;
-		case LOC_CPU:
-			n += sprintf ( buf, "CPU #%c", *(c+idx+1));
-			break;
-		case LOC_FAN:
-			n += sprintf ( buf, "Fan #%c", *(c+idx+1));
-			break;
-		case LOC_RACKMOUNTED:
-			n += sprintf ( buf, "Rack #%c", *(c+idx+1));
-			break;
-		case LOC_VOLTAGE:
-			n += sprintf ( buf, "Voltage #%c", *(c+idx+1));
-			break;
-		case LOC_LCD:
-			n += sprintf ( buf, "LCD #%c", *(c+idx+1));
-			break;
-		case '.':
-			n += sprintf ( buf, "- %c", *(c+idx+1));
-		default:
-			n += sprintf ( buf, "Unknown location");
-			break;
-	}
-	return n;
-}
-
-
-/* ****************************************************************** */
-/*
- * Format:
- * ${LETTER}${NUMBER}[[-/]${LETTER}${NUMBER} [ ... ] ]
- * the '.' may be an abbrevation
- */
-int check_location_string (char *c, char *buf)
-{
-	int n=0,i=0;
-
-	while (c[i]) {
-		if (isalpha(c[i]) || c[i] == '.') {
-			 n += check_location(c, i, buf+n);
-		}
-		else if (c[i] == '/' || c[i] == '-')
-			n += sprintf(buf+n, " at ");
-		i++;
-	}
-	return n;
-}
-
-
-/* ****************************************************************** */
-
-int get_location_code(struct individual_sensor s, char * buffer)
-{
-	char rstr[512], tmp[10], tmp2[10];
-	int n=0, i=0, llen, len;
-	/* char *buf = kmalloc(MAX_LINELENGTH, GFP_KERNEL); */
-	char *ret;
-
-	static int pos = 0; /* remember position where buffer was */
-
-	/* construct the sensor number like 0003 */
-	/* fill with zeros */
-	n = sprintf(tmp, "%d", s.token);
-	len = strlen(tmp);
-	while (strlen(tmp) < 4)
-		n += sprintf (tmp+n, "0");
-
-	/* invert the string */
-	while (tmp[i]) {
-		if (i<len)
-			tmp2[4-len+i] = tmp[i];
-		else
-			tmp2[3-i] = tmp[i];
-		i++;
-	}
-	tmp2[4] = '\0';
-
-	sprintf (rstr, SENSOR_PREFIX"%s", tmp2);
-
-	ret = (char *) get_property(rtas, rstr, &llen);
-
-	n=0;
-	if (ret[0] == '\0')
-		n += sprintf ( buffer+n, "--- ");/* does not have a location */
-	else {
-		char t[50];
-		ret += pos;
-
-		n += check_location_string(ret, buffer + n);
-		n += sprintf ( buffer+n, " ");
-		/* see how many characters we have printed */
-		sprintf ( t, "%s ", ret);
-
-		pos += strlen(t);
-		if (pos >= llen) pos=0;
-	}
-	return n;
-}
-/* ****************************************************************** */
-/* INDICATORS - Tone Frequency                                        */
-/* ****************************************************************** */
-static ssize_t ppc_rtas_tone_freq_write(struct file * file, const char * buf,
-		size_t count, loff_t *ppos)
-{
-	unsigned long freq;
-	char *dest;
-	int error;
-	freq = simple_strtoul(buf, &dest, 10);
-	if (*dest != '\0' && *dest != '\n') {
-		printk("ppc_rtas_tone_freq_write: Invalid tone freqency\n");
-		return count;
-	}
-	if (freq < 0) freq = 0;
-	rtas_tone_frequency = freq; /* save it for later */
-	error = call_rtas("set-indicator", 3, 1, NULL,
-			TONE_FREQUENCY, 0, freq);
-	if (error != 0)
-		printk(KERN_WARNING "error: setting tone frequency returned: %s\n",
-				ppc_rtas_process_error(error));
-	return count;
-}
-/* ****************************************************************** */
-static ssize_t ppc_rtas_tone_freq_read(struct file * file, char * buf,
-		size_t count, loff_t *ppos)
-{
-	int n;
-	n = sprintf(buf, "%lu\n", rtas_tone_frequency);
-
-	if (*ppos >= strlen(buf))
-		return 0;
-	if (n > strlen(buf) - *ppos)
-		n = strlen(buf) - *ppos;
-	if (n > count)
-		n = count;
-	*ppos += n;
-	return n;
-}
-/* ****************************************************************** */
-/* INDICATORS - Tone Volume                                           */
-/* ****************************************************************** */
-static ssize_t ppc_rtas_tone_volume_write(struct file * file, const char * buf,
-		size_t count, loff_t *ppos)
-{
-	unsigned long volume;
-	char *dest;
-	int error;
-	volume = simple_strtoul(buf, &dest, 10);
-	if (*dest != '\0' && *dest != '\n') {
-		printk("ppc_rtas_tone_volume_write: Invalid tone volume\n");
-		return count;
-	}
-	if (volume < 0) volume = 0;
-	if (volume > 100) volume = 100;
-
-        rtas_tone_volume = volume; /* save it for later */
-	error = call_rtas("set-indicator", 3, 1, NULL,
-			TONE_VOLUME, 0, volume);
-	if (error != 0)
-		printk(KERN_WARNING "error: setting tone volume returned: %s\n",
-				ppc_rtas_process_error(error));
-	return count;
-}
-/* ****************************************************************** */
-static ssize_t ppc_rtas_tone_volume_read(struct file * file, char * buf,
-		size_t count, loff_t *ppos)
-{
-	int n;
-	n = sprintf(buf, "%lu\n", rtas_tone_volume);
-
-	if (*ppos >= strlen(buf))
-		return 0;
-	if (n > strlen(buf) - *ppos)
-		n = strlen(buf) - *ppos;
-	if (n > count)
-		n = count;
-	*ppos += n;
-	return n;
-}