Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull, it has a shared branch with some alsa
  crossover but everything should be acked by relevant people.

  New drivers:
     - ATMEL HLCDC driver
     - designware HDMI core support (used in multiple SoCs).

  core:
     - lots more atomic modesetting work, properties and atomic ioctl
       (hidden under option)
     - bridge rework allows support for Samsung exynos chromebooks to
       work finally.
     - some more panels supported

  i915:
     - atomic plane update support
     - DSI uses shared DSI infrastructure
     - Skylake basic support is all merged now
     - component framework used for i915/snd-hda interactions
     - write-combine cpu memory mappings
     - engine init code refactored
     - full ppgtt enabled where execlists are enabled.
     - cherryview rps/gpu turbo and pipe CRC support.

  radeon:
     - indirect draw support for evergreen/cayman
     - SMC and manual fan control for SI/CI
     - Displayport audio support

  amdkfd:
     - SDMA usermode queue support
     - replace suballocator usage with more suitable one
     - rework for allowing interfacing to more than radeon

  nouveau:
     - major renaming in prep for later splitting work
     - merge arm platform driver into nouveau
     - GK20A reclocking support

  msm:
     - conversion to atomic modesetting
     - YUV support for mdp4/5
     - eDP support
     - hw cursor for mdp5

  tegra:
     - conversion to atomic modesetting
     - better suspend/resume support for child devices

  rcar-du:
     - interlaced support

  imx:
     - move to using dw_hdmi shared support
     - mode_fixup support

  sti:
     - DVO support
     - HDMI infoframe support

  exynos:
     - refactoring and cleanup, removed lots of internal unnecessary
       abstraction
     - exynos7 DECON display controller support

  Along with the usual bunch of fixes, cleanups etc"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits)
  drm/radeon: fix voltage setup on hawaii
  drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary
  drm/radeon: only enable kv/kb dpm interrupts once v3
  drm/radeon: workaround for CP HW bug on CIK
  drm/radeon: Don't try to enable write-combining without PAT
  drm/radeon: use 0-255 rather than 0-100 for pwm fan range
  drm/i915: Clamp efficient frequency to valid range
  drm/i915: Really ignore long HPD pulses on eDP
  drm/exynos: Add DECON driver
  drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
  drm/i915: Insert a command barrier on BLT/BSD cache flushes
  drm/i915: Drop vblank wait from intel_dp_link_down
  drm/exynos: fix NULL pointer reference
  drm/exynos: remove exynos_plane_dpms
  drm/exynos: remove mode property of exynos crtc
  drm/exynos: Remove exynos_plane_dpms() call with no effect
  drm/i915: Squelch overzealous uncore reset WARN_ON
  drm/i915: Take runtime pm reference on hangcheck_info
  drm/i915: Correct the IOSF Dev_FN field for IOSF transfers
  drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage
  ...

18 files changed, 737 insertions, 61 deletions

diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
new file mode 100644
index 00000000000000..5a4f4900516920
--- /dev/null
+++ b/include/drm/bridge/dw_hdmi.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DW_HDMI__
+#define __DW_HDMI__
+
+#include <drm/drmP.h>
+
+enum {
+	DW_HDMI_RES_8,
+	DW_HDMI_RES_10,
+	DW_HDMI_RES_12,
+	DW_HDMI_RES_MAX,
+};
+
+enum dw_hdmi_devtype {
+	IMX6Q_HDMI,
+	IMX6DL_HDMI,
+	RK3288_HDMI,
+};
+
+struct dw_hdmi_mpll_config {
+	unsigned long mpixelclock;
+	struct {
+		u16 cpce;
+		u16 gmp;
+	} res[DW_HDMI_RES_MAX];
+};
+
+struct dw_hdmi_curr_ctrl {
+	unsigned long mpixelclock;
+	u16 curr[DW_HDMI_RES_MAX];
+};
+
+struct dw_hdmi_sym_term {
+	unsigned long mpixelclock;
+	u16 sym_ctr;    /*clock symbol and transmitter control*/
+	u16 term;       /*transmission termination value*/
+};
+
+struct dw_hdmi_plat_data {
+	enum dw_hdmi_devtype dev_type;
+	const struct dw_hdmi_mpll_config *mpll_cfg;
+	const struct dw_hdmi_curr_ctrl *cur_ctr;
+	const struct dw_hdmi_sym_term *sym_term;
+	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
+					   struct drm_display_mode *mode);
+};
+
+void dw_hdmi_unbind(struct device *dev, struct device *master, void *data);
+int dw_hdmi_bind(struct device *dev, struct device *master,
+		 void *data, struct drm_encoder *encoder,
+		 struct resource *iores, int irq,
+		 const struct dw_hdmi_plat_data *plat_data);
+#endif /* __IMX_HDMI_H__ */
diff --git a/include/drm/bridge/ptn3460.h b/include/drm/bridge/ptn3460.h
index ff62344fec6c07..b11f8e17e72fc2 100644
--- a/include/drm/bridge/ptn3460.h
+++ b/include/drm/bridge/ptn3460.h
@@ -15,6 +15,7 @@
 #define _DRM_BRIDGE_PTN3460_H_
 
 struct drm_device;
+struct drm_bridge;
 struct drm_encoder;
 struct i2c_client;
 struct device_node;
@@ -23,6 +24,9 @@ struct device_node;
 
 int ptn3460_init(struct drm_device *dev, struct drm_encoder *encoder,
 		struct i2c_client *client, struct device_node *node);
+
+void ptn3460_destroy(struct drm_bridge *bridge);
+
 #else
 
 static inline int ptn3460_init(struct drm_device *dev,
@@ -32,6 +36,10 @@ static inline int ptn3460_init(struct drm_device *dev,
 	return 0;
 }
 
+static inline void ptn3460_destroy(struct drm_bridge *bridge)
+{
+}
+
 #endif
 
 #endif
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index e1b2e8b98af7cd..e928625a9da0be 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -143,6 +143,7 @@ void drm_err(const char *format, ...);
 #define DRIVER_MODESET     0x2000
 #define DRIVER_PRIME       0x4000
 #define DRIVER_RENDER      0x8000
+#define DRIVER_ATOMIC      0x10000
 
 /***********************************************************************/
 /** \name Macros to make printk easier */
@@ -283,6 +284,8 @@ struct drm_file {
 	 * in the plane list
 	 */
 	unsigned universal_planes:1;
+	/* true if client understands atomic properties */
+	unsigned atomic:1;
 
 	struct pid *pid;
 	kuid_t uid;
@@ -744,8 +747,6 @@ struct drm_device {
 
 	/** \name Context support */
 	/*@{ */
-	bool irq_enabled;		/**< True if irq handler is enabled */
-	int irq;
 
 	__volatile__ long context_flag;	/**< Context swapping flag */
 	int last_context;		/**< Last current context */
@@ -753,6 +754,8 @@ struct drm_device {
 
 	/** \name VBLANK IRQ support */
 	/*@{ */
+	bool irq_enabled;
+	int irq;
 
 	/*
 	 * At load time, disabling the vblank interrupt won't be allowed since
@@ -954,6 +957,7 @@ extern void drm_master_put(struct drm_master **master);
 extern void drm_put_dev(struct drm_device *dev);
 extern void drm_unplug_dev(struct drm_device *dev);
 extern unsigned int drm_debug;
+extern bool drm_atomic;
 
 				/* Debugfs support */
 #if defined(CONFIG_DEBUG_FS)
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index ad2229574dd945..51168a8b723a2d 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -38,16 +38,25 @@ void drm_atomic_state_free(struct drm_atomic_state *state);
 struct drm_crtc_state * __must_check
 drm_atomic_get_crtc_state(struct drm_atomic_state *state,
 			  struct drm_crtc *crtc);
+int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
+		struct drm_crtc_state *state, struct drm_property *property,
+		uint64_t val);
 struct drm_plane_state * __must_check
 drm_atomic_get_plane_state(struct drm_atomic_state *state,
 			   struct drm_plane *plane);
+int drm_atomic_plane_set_property(struct drm_plane *plane,
+		struct drm_plane_state *state, struct drm_property *property,
+		uint64_t val);
 struct drm_connector_state * __must_check
 drm_atomic_get_connector_state(struct drm_atomic_state *state,
 			       struct drm_connector *connector);
+int drm_atomic_connector_set_property(struct drm_connector *connector,
+		struct drm_connector_state *state, struct drm_property *property,
+		uint64_t val);
 
 int __must_check
-drm_atomic_set_crtc_for_plane(struct drm_atomic_state *state,
-			      struct drm_plane *plane, struct drm_crtc *crtc);
+drm_atomic_set_crtc_for_plane(struct drm_plane_state *plane_state,
+			      struct drm_crtc *crtc);
 void drm_atomic_set_fb_for_plane(struct drm_plane_state *plane_state,
 				 struct drm_framebuffer *fb);
 int __must_check
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index f956b413311e15..8039d54a744127 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -30,6 +30,10 @@
 
 #include <drm/drm_crtc.h>
 
+int drm_atomic_helper_check_modeset(struct drm_device *dev,
+				struct drm_atomic_state *state);
+int drm_atomic_helper_check_planes(struct drm_device *dev,
+			       struct drm_atomic_state *state);
 int drm_atomic_helper_check(struct drm_device *dev,
 			    struct drm_atomic_state *state);
 int drm_atomic_helper_commit(struct drm_device *dev,
@@ -78,6 +82,8 @@ int drm_atomic_helper_page_flip(struct drm_crtc *crtc,
 				struct drm_framebuffer *fb,
 				struct drm_pending_vblank_event *event,
 				uint32_t flags);
+void drm_atomic_helper_connector_dpms(struct drm_connector *connector,
+				      int mode);
 
 /* default implementations for state handling */
 void drm_atomic_helper_crtc_reset(struct drm_crtc *crtc);
@@ -123,4 +129,41 @@ void drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
 #define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \
 	drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask)
 
+/*
+ * drm_atomic_plane_disabling - check whether a plane is being disabled
+ * @plane: plane object
+ * @old_state: previous atomic state
+ *
+ * Checks the atomic state of a plane to determine whether it's being disabled
+ * or not. This also WARNs if it detects an invalid state (both CRTC and FB
+ * need to either both be NULL or both be non-NULL).
+ *
+ * RETURNS:
+ * True if the plane is being disabled, false otherwise.
+ */
+static inline bool
+drm_atomic_plane_disabling(struct drm_plane *plane,
+			   struct drm_plane_state *old_state)
+{
+	/*
+	 * When disabling a plane, CRTC and FB should always be NULL together.
+	 * Anything else should be considered a bug in the atomic core, so we
+	 * gently warn about it.
+	 */
+	WARN_ON((plane->state->crtc == NULL && plane->state->fb != NULL) ||
+		(plane->state->crtc != NULL && plane->state->fb == NULL));
+
+	/*
+	 * When using the transitional helpers, old_state may be NULL. If so,
+	 * we know nothing about the current state and have to assume that it
+	 * might be enabled.
+	 *
+	 * When using the atomic helpers, old_state won't be NULL. Therefore
+	 * this check assumes that either the driver will have reconstructed
+	 * the correct state in ->reset() or that the driver will have taken
+	 * appropriate measures to disable all planes.
+	 */
+	return (!old_state || old_state->crtc) && !plane->state->crtc;
+}
+
 #endif /* DRM_ATOMIC_HELPER_H_ */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index b86329813ad3a3..920e21a8f3fd79 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -31,6 +31,7 @@
 #include <linux/idr.h>
 #include <linux/fb.h>
 #include <linux/hdmi.h>
+#include <linux/media-bus-format.h>
 #include <uapi/drm/drm_mode.h>
 #include <uapi/drm/drm_fourcc.h>
 #include <drm/drm_modeset_lock.h>
@@ -63,8 +64,16 @@ struct drm_mode_object {
 
 #define DRM_OBJECT_MAX_PROPERTY 24
 struct drm_object_properties {
-	int count;
-	uint32_t ids[DRM_OBJECT_MAX_PROPERTY];
+	int count, atomic_count;
+	/* NOTE: if we ever start dynamically destroying properties (ie.
+	 * not at drm_mode_config_cleanup() time), then we'd have to do
+	 * a better job of detaching property from mode objects to avoid
+	 * dangling property pointers:
+	 */
+	struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY];
+	/* do not read/write values directly, but use drm_object_property_get_value()
+	 * and drm_object_property_set_value():
+	 */
 	uint64_t values[DRM_OBJECT_MAX_PROPERTY];
 };
 
@@ -131,6 +140,9 @@ struct drm_display_info {
 	enum subpixel_order subpixel_order;
 	u32 color_formats;
 
+	const u32 *bus_formats;
+	unsigned int num_bus_formats;
+
 	/* Mask of supported hdmi deep color modes */
 	u8 edid_hdmi_dc_modes;
 
@@ -237,8 +249,11 @@ struct drm_atomic_state;
 
 /**
  * struct drm_crtc_state - mutable CRTC state
+ * @crtc: backpointer to the CRTC
  * @enable: whether the CRTC should be enabled, gates all other state
+ * @active: whether the CRTC is actively displaying (used for DPMS)
  * @mode_changed: for use by helpers and drivers when computing state updates
+ * @active_changed: for use by helpers and drivers when computing state updates
  * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes
  * @last_vblank_count: for helpers and drivers to capture the vblank of the
  * 	update to ensure framebuffer cleanup isn't done too early
@@ -248,13 +263,23 @@ struct drm_atomic_state;
  * @event: optional pointer to a DRM event to signal upon completion of the
  * 	state update
  * @state: backpointer to global drm_atomic_state
+ *
+ * Note that the distinction between @enable and @active is rather subtile:
+ * Flipping @active while @enable is set without changing anything else may
+ * never return in a failure from the ->atomic_check callback. Userspace assumes
+ * that a DPMS On will always succeed. In other words: @enable controls resource
+ * assignment, @active controls the actual hardware state.
  */
 struct drm_crtc_state {
+	struct drm_crtc *crtc;
+
 	bool enable;
+	bool active;
 
 	/* computed state bits used by helpers and drivers */
 	bool planes_changed : 1;
 	bool mode_changed : 1;
+	bool active_changed : 1;
 
 	/* attached planes bitmask:
 	 * WARNING: transitional helpers do not maintain plane_mask so
@@ -292,6 +317,9 @@ struct drm_crtc_state {
  * @atomic_duplicate_state: duplicate the atomic state for this CRTC
  * @atomic_destroy_state: destroy an atomic state for this CRTC
  * @atomic_set_property: set a property on an atomic state for this CRTC
+ *    (do not call directly, use drm_atomic_crtc_set_property())
+ * @atomic_get_property: get a property on an atomic state for this CRTC
+ *    (do not call directly, use drm_atomic_crtc_get_property())
  *
  * The drm_crtc_funcs structure is the central CRTC management structure
  * in the DRM.  Each CRTC controls one or more connectors (note that the name
@@ -351,6 +379,10 @@ struct drm_crtc_funcs {
 				   struct drm_crtc_state *state,
 				   struct drm_property *property,
 				   uint64_t val);
+	int (*atomic_get_property)(struct drm_crtc *crtc,
+				   const struct drm_crtc_state *state,
+				   struct drm_property *property,
+				   uint64_t *val);
 };
 
 /**
@@ -449,11 +481,14 @@ struct drm_crtc {
 
 /**
  * struct drm_connector_state - mutable connector state
+ * @connector: backpointer to the connector
  * @crtc: CRTC to connect connector to, NULL if disabled
  * @best_encoder: can be used by helpers and drivers to select the encoder
  * @state: backpointer to global drm_atomic_state
  */
 struct drm_connector_state {
+	struct drm_connector *connector;
+
 	struct drm_crtc *crtc;  /* do not write directly, use drm_atomic_set_crtc_for_connector() */
 
 	struct drm_encoder *best_encoder;
@@ -463,7 +498,7 @@ struct drm_connector_state {
 
 /**
  * struct drm_connector_funcs - control connectors on a given device
- * @dpms: set power state (see drm_crtc_funcs above)
+ * @dpms: set power state
  * @save: save connector state
  * @restore: restore connector state
  * @reset: reset connector after state has been invalidated (e.g. resume)
@@ -475,6 +510,9 @@ struct drm_connector_state {
  * @atomic_duplicate_state: duplicate the atomic state for this connector
  * @atomic_destroy_state: destroy an atomic state for this connector
  * @atomic_set_property: set a property on an atomic state for this connector
+ *    (do not call directly, use drm_atomic_connector_set_property())
+ * @atomic_get_property: get a property on an atomic state for this connector
+ *    (do not call directly, use drm_atomic_connector_get_property())
  *
  * Each CRTC may have one or more connectors attached to it.  The functions
  * below allow the core DRM code to control connectors, enumerate available modes,
@@ -508,6 +546,10 @@ struct drm_connector_funcs {
 				   struct drm_connector_state *state,
 				   struct drm_property *property,
 				   uint64_t val);
+	int (*atomic_get_property)(struct drm_connector *connector,
+				   const struct drm_connector_state *state,
+				   struct drm_property *property,
+				   uint64_t *val);
 };
 
 /**
@@ -693,6 +735,7 @@ struct drm_connector {
 
 /**
  * struct drm_plane_state - mutable plane state
+ * @plane: backpointer to the plane
  * @crtc: currently bound CRTC, NULL if disabled
  * @fb: currently bound framebuffer
  * @fence: optional fence to wait for before scanning out @fb
@@ -709,6 +752,8 @@ struct drm_connector {
  * @state: backpointer to global drm_atomic_state
  */
 struct drm_plane_state {
+	struct drm_plane *plane;
+
 	struct drm_crtc *crtc;   /* do not write directly, use drm_atomic_set_crtc_for_plane() */
 	struct drm_framebuffer *fb;  /* do not write directly, use drm_atomic_set_fb_for_plane() */
 	struct fence *fence;
@@ -721,6 +766,9 @@ struct drm_plane_state {
 	uint32_t src_x, src_y;
 	uint32_t src_h, src_w;
 
+	/* Plane rotation */
+	unsigned int rotation;
+
 	struct drm_atomic_state *state;
 };
 
@@ -735,6 +783,9 @@ struct drm_plane_state {
  * @atomic_duplicate_state: duplicate the atomic state for this plane
  * @atomic_destroy_state: destroy an atomic state for this plane
  * @atomic_set_property: set a property on an atomic state for this plane
+ *    (do not call directly, use drm_atomic_plane_set_property())
+ * @atomic_get_property: get a property on an atomic state for this plane
+ *    (do not call directly, use drm_atomic_plane_get_property())
  */
 struct drm_plane_funcs {
 	int (*update_plane)(struct drm_plane *plane,
@@ -758,6 +809,10 @@ struct drm_plane_funcs {
 				   struct drm_plane_state *state,
 				   struct drm_property *property,
 				   uint64_t val);
+	int (*atomic_get_property)(struct drm_plane *plane,
+				   const struct drm_plane_state *state,
+				   struct drm_property *property,
+				   uint64_t *val);
 };
 
 enum drm_plane_type {
@@ -813,15 +868,16 @@ struct drm_plane {
 
 /**
  * struct drm_bridge_funcs - drm_bridge control functions
+ * @attach: Called during drm_bridge_attach
  * @mode_fixup: Try to fixup (or reject entirely) proposed mode for this bridge
  * @disable: Called right before encoder prepare, disables the bridge
  * @post_disable: Called right after encoder prepare, for lockstepped disable
  * @mode_set: Set this mode to the bridge
  * @pre_enable: Called right before encoder commit, for lockstepped commit
  * @enable: Called right after encoder commit, enables the bridge
- * @destroy: make object go away
  */
 struct drm_bridge_funcs {
+	int (*attach)(struct drm_bridge *bridge);
 	bool (*mode_fixup)(struct drm_bridge *bridge,
 			   const struct drm_display_mode *mode,
 			   struct drm_display_mode *adjusted_mode);
@@ -832,22 +888,24 @@ struct drm_bridge_funcs {
 			 struct drm_display_mode *adjusted_mode);
 	void (*pre_enable)(struct drm_bridge *bridge);
 	void (*enable)(struct drm_bridge *bridge);
-	void (*destroy)(struct drm_bridge *bridge);
 };
 
 /**
  * struct drm_bridge - central DRM bridge control structure
  * @dev: DRM device this bridge belongs to
- * @head: list management
+ * @of_node: device node pointer to the bridge
+ * @list: to keep track of all added bridges
  * @base: base mode object
  * @funcs: control functions
  * @driver_private: pointer to the bridge driver's internal context
  */
 struct drm_bridge {
 	struct drm_device *dev;
-	struct list_head head;
-
-	struct drm_mode_object base;
+	struct drm_encoder *encoder;
+#ifdef CONFIG_OF
+	struct device_node *of_node;
+#endif
+	struct list_head list;
 
 	const struct drm_bridge_funcs *funcs;
 	void *driver_private;
@@ -856,7 +914,8 @@ struct drm_bridge {
 /**
  * struct struct drm_atomic_state - the global state object for atomic updates
  * @dev: parent DRM device
- * @flags: state flags like async update
+ * @allow_modeset: allow full modeset
+ * @legacy_cursor_update: hint to enforce legacy cursor ioctl semantics
  * @planes: pointer to array of plane pointers
  * @plane_states: pointer to array of plane states pointers
  * @crtcs: pointer to array of CRTC pointers
@@ -868,7 +927,8 @@ struct drm_bridge {
  */
 struct drm_atomic_state {
 	struct drm_device *dev;
-	uint32_t flags;
+	bool allow_modeset : 1;
+	bool legacy_cursor_update : 1;
 	struct drm_plane **planes;
 	struct drm_plane_state **plane_states;
 	struct drm_crtc **crtcs;
@@ -950,7 +1010,6 @@ struct drm_mode_group {
 	uint32_t num_crtcs;
 	uint32_t num_encoders;
 	uint32_t num_connectors;
-	uint32_t num_bridges;
 
 	/* list of object IDs for this group */
 	uint32_t *id_list;
@@ -969,8 +1028,6 @@ struct drm_mode_group {
  * @fb_list: list of framebuffers available
  * @num_connector: number of connectors on this device
  * @connector_list: list of connector objects
- * @num_bridge: number of bridges on this device
- * @bridge_list: list of bridge objects
  * @num_encoder: number of encoders on this device
  * @encoder_list: list of encoder objects
  * @num_overlay_plane: number of overlay planes on this device
@@ -1015,8 +1072,6 @@ struct drm_mode_config {
 
 	int num_connector;
 	struct list_head connector_list;
-	int num_bridge;
-	struct list_head bridge_list;
 	int num_encoder;
 	struct list_head encoder_list;
 
@@ -1043,6 +1098,7 @@ struct drm_mode_config {
 	/* output poll support */
 	bool poll_enabled;
 	bool poll_running;
+	bool delayed_event;
 	struct delayed_work output_poll_work;
 
 	/* pointers to standard properties */
@@ -1053,6 +1109,17 @@ struct drm_mode_config {
 	struct drm_property *tile_property;
 	struct drm_property *plane_type_property;
 	struct drm_property *rotation_property;
+	struct drm_property *prop_src_x;
+	struct drm_property *prop_src_y;
+	struct drm_property *prop_src_w;
+	struct drm_property *prop_src_h;
+	struct drm_property *prop_crtc_x;
+	struct drm_property *prop_crtc_y;
+	struct drm_property *prop_crtc_w;
+	struct drm_property *prop_crtc_h;
+	struct drm_property *prop_fb_id;
+	struct drm_property *prop_crtc_id;
+	struct drm_property *prop_active;
 
 	/* DVI-I properties */
 	struct drm_property *dvi_i_subconnector_property;
@@ -1153,9 +1220,10 @@ extern unsigned int drm_connector_index(struct drm_connector *connector);
 /* helper to unplug all connectors from sysfs for device */
 extern void drm_connector_unplug_all(struct drm_device *dev);
 
-extern int drm_bridge_init(struct drm_device *dev, struct drm_bridge *bridge,
-			   const struct drm_bridge_funcs *funcs);
-extern void drm_bridge_cleanup(struct drm_bridge *bridge);
+extern int drm_bridge_add(struct drm_bridge *bridge);
+extern void drm_bridge_remove(struct drm_bridge *bridge);
+extern struct drm_bridge *of_drm_find_bridge(struct device_node *np);
+extern int drm_bridge_attach(struct drm_device *dev, struct drm_bridge *bridge);
 
 extern int drm_encoder_init(struct drm_device *dev,
 			    struct drm_encoder *encoder,
@@ -1191,6 +1259,8 @@ extern int drm_plane_init(struct drm_device *dev,
 extern void drm_plane_cleanup(struct drm_plane *plane);
 extern unsigned int drm_plane_index(struct drm_plane *plane);
 extern void drm_plane_force_disable(struct drm_plane *plane);
+extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
+				   int *hdisplay, int *vdisplay);
 extern int drm_crtc_check_viewport(const struct drm_crtc *crtc,
 				   int x, int y,
 				   const struct drm_display_mode *mode,
@@ -1224,6 +1294,10 @@ int drm_mode_connector_set_tile_property(struct drm_connector *connector);
 extern int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 						   const struct edid *edid);
 
+extern int drm_display_info_set_bus_formats(struct drm_display_info *info,
+					    const u32 *formats,
+					    unsigned int num_formats);
+
 static inline bool drm_property_type_is(struct drm_property *property,
 		uint32_t type)
 {
@@ -1279,6 +1353,8 @@ struct drm_property *drm_property_create_signed_range(struct drm_device *dev,
 					 int64_t min, int64_t max);
 struct drm_property *drm_property_create_object(struct drm_device *dev,
 					 int flags, const char *name, uint32_t type);
+struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags,
+					 const char *name);
 extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property);
 extern int drm_property_add_enum(struct drm_property *property, int index,
 				 uint64_t value, const char *name);
@@ -1290,6 +1366,10 @@ extern int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
 extern int drm_mode_create_dirty_info_property(struct drm_device *dev);
 extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
+extern bool drm_property_change_valid_get(struct drm_property *property,
+					 uint64_t value, struct drm_mode_object **ref);
+extern void drm_property_change_valid_put(struct drm_property *property,
+		struct drm_mode_object *ref);
 
 extern int drm_mode_connector_attach_encoder(struct drm_connector *connector,
 					     struct drm_encoder *encoder);
@@ -1381,6 +1461,8 @@ extern int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
 extern int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
 				       struct drm_property *property,
 				       uint64_t value);
+extern int drm_mode_atomic_ioctl(struct drm_device *dev,
+				 void *data, struct drm_file *file_priv);
 
 extern void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth,
 				 int *bpp);
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index 7adbb65ea8aeaa..c250a22b39aba0 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -39,17 +39,38 @@
 
 #include <linux/fb.h>
 
+#include <drm/drm_crtc.h>
+
 enum mode_set_atomic {
 	LEAVE_ATOMIC_MODE_SET,
 	ENTER_ATOMIC_MODE_SET,
 };
 
 /**
- * drm_crtc_helper_funcs - helper operations for CRTCs
- * @mode_fixup: try to fixup proposed mode for this connector
+ * struct drm_crtc_helper_funcs - helper operations for CRTCs
+ * @dpms: set power state
+ * @prepare: prepare the CRTC, called before @mode_set
+ * @commit: commit changes to CRTC, called after @mode_set
+ * @mode_fixup: try to fixup proposed mode for this CRTC
  * @mode_set: set this mode
+ * @mode_set_nofb: set mode only (no scanout buffer attached)
+ * @mode_set_base: update the scanout buffer
+ * @mode_set_base_atomic: non-blocking mode set (used for kgdb support)
+ * @load_lut: load color palette
+ * @disable: disable CRTC when no longer in use
+ * @enable: enable CRTC
+ * @atomic_check: check for validity of an atomic state
+ * @atomic_begin: begin atomic update
+ * @atomic_flush: flush atomic update
  *
  * The helper operations are called by the mid-layer CRTC helper.
+ *
+ * Note that with atomic helpers @dpms, @prepare and @commit hooks are
+ * deprecated. Used @enable and @disable instead exclusively.
+ *
+ * With legacy crtc helpers there's a big semantic difference between @disable
+ * and the other hooks: @disable also needs to release any resources acquired in
+ * @mode_set (like shared PLLs).
  */
 struct drm_crtc_helper_funcs {
 	/*
@@ -80,8 +101,8 @@ struct drm_crtc_helper_funcs {
 	/* reload the current crtc LUT */
 	void (*load_lut)(struct drm_crtc *crtc);
 
-	/* disable crtc when not in use - more explicit than dpms off */
 	void (*disable)(struct drm_crtc *crtc);
+	void (*enable)(struct drm_crtc *crtc);
 
 	/* atomic helpers */
 	int (*atomic_check)(struct drm_crtc *crtc,
@@ -91,11 +112,28 @@ struct drm_crtc_helper_funcs {
 };
 
 /**
- * drm_encoder_helper_funcs - helper operations for encoders
+ * struct drm_encoder_helper_funcs - helper operations for encoders
+ * @dpms: set power state
+ * @save: save connector state
+ * @restore: restore connector state
  * @mode_fixup: try to fixup proposed mode for this connector
+ * @prepare: part of the disable sequence, called before the CRTC modeset
+ * @commit: called after the CRTC modeset
  * @mode_set: set this mode
+ * @get_crtc: return CRTC that the encoder is currently attached to
+ * @detect: connection status detection
+ * @disable: disable encoder when not in use (overrides DPMS off)
+ * @enable: enable encoder
+ * @atomic_check: check for validity of an atomic update
  *
  * The helper operations are called by the mid-layer CRTC helper.
+ *
+ * Note that with atomic helpers @dpms, @prepare and @commit hooks are
+ * deprecated. Used @enable and @disable instead exclusively.
+ *
+ * With legacy crtc helpers there's a big semantic difference between @disable
+ * and the other hooks: @disable also needs to release any resources acquired in
+ * @mode_set (like shared PLLs).
  */
 struct drm_encoder_helper_funcs {
 	void (*dpms)(struct drm_encoder *encoder, int mode);
@@ -114,14 +152,21 @@ struct drm_encoder_helper_funcs {
 	/* detect for DAC style encoders */
 	enum drm_connector_status (*detect)(struct drm_encoder *encoder,
 					    struct drm_connector *connector);
-	/* disable encoder when not in use - more explicit than dpms off */
 	void (*disable)(struct drm_encoder *encoder);
+
+	void (*enable)(struct drm_encoder *encoder);
+
+	/* atomic helpers */
+	int (*atomic_check)(struct drm_encoder *encoder,
+			    struct drm_crtc_state *crtc_state,
+			    struct drm_connector_state *conn_state);
 };
 
 /**
- * drm_connector_helper_funcs - helper operations for connectors
+ * struct drm_connector_helper_funcs - helper operations for connectors
  * @get_modes: get mode list for this connector
- * @mode_valid (optional): is this mode valid on the given connector?
+ * @mode_valid: is this mode valid on the given connector? (optional)
+ * @best_encoder: return the preferred encoder for this connector
  *
  * The helper operations are called by the mid-layer CRTC helper.
  */
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 11f8c84f98ce51..7e25030a6aa296 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -586,6 +586,7 @@ struct drm_dp_link {
 
 int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link);
 int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link);
+int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link);
 int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link);
 
 int drm_dp_aux_register(struct drm_dp_aux *aux);
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index b597068103aa9d..21b944c456f69d 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -125,7 +125,7 @@ void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
 int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info);
 
 int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper);
-bool drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel);
+int drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel);
 int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper);
 int drm_fb_helper_debug_enter(struct fb_info *info);
 int drm_fb_helper_debug_leave(struct fb_info *info);
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index 91d0582f924e3e..d92f6dd1fb11fd 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -90,6 +90,9 @@ enum drm_mode_status {
 
 #define CRTC_INTERLACE_HALVE_V	(1 << 0) /* halve V values for interlacing */
 #define CRTC_STEREO_DOUBLE	(1 << 1) /* adjust timings for stereo modes */
+#define CRTC_NO_DBLSCAN		(1 << 2) /* don't adjust doublescan */
+#define CRTC_NO_VSCAN		(1 << 3) /* don't adjust doublescan */
+#define CRTC_STEREO_DOUBLE_ONLY	(CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
 
 #define DRM_MODE_FLAG_3D_MAX	DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
 
@@ -197,6 +200,8 @@ struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
 					      int GTF_K, int GTF_2J);
 void drm_display_mode_from_videomode(const struct videomode *vm,
 				     struct drm_display_mode *dmode);
+void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
+				   struct videomode *vm);
 int of_get_drm_display_mode(struct device_node *np,
 			    struct drm_display_mode *dmode,
 			    int index);
@@ -217,9 +222,9 @@ bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
 					const struct drm_display_mode *mode2);
 
 /* for use by the crtc helper probe functions */
-void drm_mode_validate_size(struct drm_device *dev,
-			    struct list_head *mode_list,
-			    int maxX, int maxY);
+enum drm_mode_status drm_mode_validate_basic(const struct drm_display_mode *mode);
+enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode,
+					    int maxX, int maxY);
 void drm_mode_prune_invalid(struct drm_device *dev,
 			    struct list_head *mode_list, bool verbose);
 void drm_mode_sort(struct list_head *mode_list);
diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
index a185392cafebdb..31c11d36fae6e1 100644
--- a/include/drm/drm_plane_helper.h
+++ b/include/drm/drm_plane_helper.h
@@ -52,7 +52,8 @@ extern int drm_crtc_init(struct drm_device *dev,
  * @prepare_fb: prepare a framebuffer for use by the plane
  * @cleanup_fb: cleanup a framebuffer when it's no longer used by the plane
  * @atomic_check: check that a given atomic state is valid and can be applied
- * @atomic_update: apply an atomic state to the plane
+ * @atomic_update: apply an atomic state to the plane (mandatory)
+ * @atomic_disable: disable the plane
  *
  * The helper operations are called by the mid-layer CRTC helper.
  */
@@ -66,6 +67,8 @@ struct drm_plane_helper_funcs {
 			    struct drm_plane_state *state);
 	void (*atomic_update)(struct drm_plane *plane,
 			      struct drm_plane_state *old_state);
+	void (*atomic_disable)(struct drm_plane *plane,
+			       struct drm_plane_state *old_state);
 };
 
 static inline void drm_plane_helper_add(struct drm_plane *plane,
diff --git a/include/linux/host1x.h b/include/linux/host1x.h
index bb9840fd1e1885..464f33814a94d0 100644
--- a/include/linux/host1x.h
+++ b/include/linux/host1x.h
@@ -250,17 +250,29 @@ void host1x_job_unpin(struct host1x_job *job);
 struct host1x_device;
 
 struct host1x_driver {
+	struct device_driver driver;
+
 	const struct of_device_id *subdevs;
 	struct list_head list;
-	const char *name;
 
 	int (*probe)(struct host1x_device *device);
 	int (*remove)(struct host1x_device *device);
+	void (*shutdown)(struct host1x_device *device);
 };
 
-int host1x_driver_register(struct host1x_driver *driver);
+static inline struct host1x_driver *
+to_host1x_driver(struct device_driver *driver)
+{
+	return container_of(driver, struct host1x_driver, driver);
+}
+
+int host1x_driver_register_full(struct host1x_driver *driver,
+				struct module *owner);
 void host1x_driver_unregister(struct host1x_driver *driver);
 
+#define host1x_driver_register(driver) \
+	host1x_driver_register_full(driver, THIS_MODULE)
+
 struct host1x_device {
 	struct host1x_driver *driver;
 	struct list_head list;
@@ -272,6 +284,8 @@ struct host1x_device {
 
 	struct mutex clients_lock;
 	struct list_head clients;
+
+	bool registered;
 };
 
 static inline struct host1x_device *to_host1x_device(struct device *dev)
diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h
index b0b85561364161..01b2d6d0e35529 100644
--- a/include/uapi/drm/drm.h
+++ b/include/uapi/drm/drm.h
@@ -654,6 +654,13 @@ struct drm_get_cap {
  */
 #define DRM_CLIENT_CAP_UNIVERSAL_PLANES  2
 
+/**
+ * DRM_CLIENT_CAP_ATOMIC
+ *
+ * If set to 1, the DRM core will expose atomic properties to userspace
+ */
+#define DRM_CLIENT_CAP_ATOMIC	3
+
 /** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
 struct drm_set_client_cap {
 	__u64 capability;
@@ -777,6 +784,7 @@ struct drm_prime_handle {
 #define DRM_IOCTL_MODE_OBJ_GETPROPERTIES	DRM_IOWR(0xB9, struct drm_mode_obj_get_properties)
 #define DRM_IOCTL_MODE_OBJ_SETPROPERTY	DRM_IOWR(0xBA, struct drm_mode_obj_set_property)
 #define DRM_IOCTL_MODE_CURSOR2		DRM_IOWR(0xBB, struct drm_mode_cursor2)
+#define DRM_IOCTL_MODE_ATOMIC		DRM_IOWR(0xBC, struct drm_mode_atomic)
 
 /**
  * Device specific ioctls should only be in their respective headers
diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
index 646ae5f39f42a7..a284f11a8ef594 100644
--- a/include/uapi/drm/drm_fourcc.h
+++ b/include/uapi/drm/drm_fourcc.h
@@ -109,9 +109,6 @@
 #define DRM_FORMAT_NV24		fourcc_code('N', 'V', '2', '4') /* non-subsampled Cr:Cb plane */
 #define DRM_FORMAT_NV42		fourcc_code('N', 'V', '4', '2') /* non-subsampled Cb:Cr plane */
 
-/* special NV12 tiled format */
-#define DRM_FORMAT_NV12MT	fourcc_code('T', 'M', '1', '2') /* 2x2 subsampled Cr:Cb plane 64x32 macroblocks */
-
 /*
  * 3 plane YCbCr
  * index 0: Y plane, [7:0] Y
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 86574b0005ff0a..ca788e01dab207 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -272,6 +272,13 @@ struct drm_mode_get_connector {
 #define DRM_MODE_PROP_OBJECT		DRM_MODE_PROP_TYPE(1)
 #define DRM_MODE_PROP_SIGNED_RANGE	DRM_MODE_PROP_TYPE(2)
 
+/* the PROP_ATOMIC flag is used to hide properties from userspace that
+ * is not aware of atomic properties.  This is mostly to work around
+ * older userspace (DDX drivers) that read/write each prop they find,
+ * witout being aware that this could be triggering a lengthy modeset.
+ */
+#define DRM_MODE_PROP_ATOMIC        0x80000000
+
 struct drm_mode_property_enum {
 	__u64 value;
 	char name[DRM_PROP_NAME_LEN];
@@ -338,7 +345,7 @@ struct drm_mode_fb_cmd2 {
 
 	/*
 	 * In case of planar formats, this ioctl allows up to 4
-	 * buffer objects with offets and pitches per plane.
+	 * buffer objects with offsets and pitches per plane.
 	 * The pitch and offset order is dictated by the fourcc,
 	 * e.g. NV12 (http://fourcc.org/yuv.php#NV12) is described as:
 	 *
@@ -346,9 +353,9 @@ struct drm_mode_fb_cmd2 {
 	 *   followed by an interleaved U/V plane containing
 	 *   8 bit 2x2 subsampled colour difference samples.
 	 *
-	 * So it would consist of Y as offset[0] and UV as
-	 * offeset[1].  Note that offset[0] will generally
-	 * be 0.
+	 * So it would consist of Y as offsets[0] and UV as
+	 * offsets[1].  Note that offsets[0] will generally
+	 * be 0 (but this is not required).
 	 */
 	__u32 handles[4];
 	__u32 pitches[4]; /* pitch for each plane */
@@ -519,4 +526,27 @@ struct drm_mode_destroy_dumb {
 	uint32_t handle;
 };
 
+/* page-flip flags are valid, plus: */
+#define DRM_MODE_ATOMIC_TEST_ONLY 0x0100
+#define DRM_MODE_ATOMIC_NONBLOCK  0x0200
+#define DRM_MODE_ATOMIC_ALLOW_MODESET 0x0400
+
+#define DRM_MODE_ATOMIC_FLAGS (\
+		DRM_MODE_PAGE_FLIP_EVENT |\
+		DRM_MODE_PAGE_FLIP_ASYNC |\
+		DRM_MODE_ATOMIC_TEST_ONLY |\
+		DRM_MODE_ATOMIC_NONBLOCK |\
+		DRM_MODE_ATOMIC_ALLOW_MODESET)
+
+struct drm_mode_atomic {
+	__u32 flags;
+	__u32 count_objs;
+	__u64 objs_ptr;
+	__u64 count_props_ptr;
+	__u64 props_ptr;
+	__u64 prop_values_ptr;
+	__u64 reserved;
+	__u64 user_data;
+};
+
 #endif
diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
index 250262265ee31c..6eed16b92a2419 100644
--- a/include/uapi/drm/i915_drm.h
+++ b/include/uapi/drm/i915_drm.h
@@ -224,6 +224,8 @@ typedef struct _drm_i915_sarea {
 #define DRM_I915_REG_READ		0x31
 #define DRM_I915_GET_RESET_STATS	0x32
 #define DRM_I915_GEM_USERPTR		0x33
+#define DRM_I915_GEM_CONTEXT_GETPARAM	0x34
+#define DRM_I915_GEM_CONTEXT_SETPARAM	0x35
 
 #define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
 #define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
@@ -275,6 +277,8 @@ typedef struct _drm_i915_sarea {
 #define DRM_IOCTL_I915_REG_READ			DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_REG_READ, struct drm_i915_reg_read)
 #define DRM_IOCTL_I915_GET_RESET_STATS		DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GET_RESET_STATS, struct drm_i915_reset_stats)
 #define DRM_IOCTL_I915_GEM_USERPTR			DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_USERPTR, struct drm_i915_gem_userptr)
+#define DRM_IOCTL_I915_GEM_CONTEXT_GETPARAM	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_GETPARAM, struct drm_i915_gem_context_param)
+#define DRM_IOCTL_I915_GEM_CONTEXT_SETPARAM	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_SETPARAM, struct drm_i915_gem_context_param)
 
 /* Allow drivers to submit batchbuffers directly to hardware, relying
  * on the security mechanisms provided by hardware.
@@ -341,6 +345,8 @@ typedef struct drm_i915_irq_wait {
 #define I915_PARAM_HAS_WT     	 	 27
 #define I915_PARAM_CMD_PARSER_VERSION	 28
 #define I915_PARAM_HAS_COHERENT_PHYS_GTT 29
+#define I915_PARAM_MMAP_VERSION          30
+#define I915_PARAM_HAS_BSD2		 31
 
 typedef struct drm_i915_getparam {
 	int param;
@@ -488,6 +494,14 @@ struct drm_i915_gem_mmap {
 	 * This is a fixed-size type for 32/64 compatibility.
 	 */
 	__u64 addr_ptr;
+
+	/**
+	 * Flags for extended behaviour.
+	 *
+	 * Added in version 2.
+	 */
+	__u64 flags;
+#define I915_MMAP_WC 0x1
 };
 
 struct drm_i915_gem_mmap_gtt {
@@ -737,7 +751,13 @@ struct drm_i915_gem_execbuffer2 {
  */
 #define I915_EXEC_HANDLE_LUT		(1<<12)
 
-#define __I915_EXEC_UNKNOWN_FLAGS -(I915_EXEC_HANDLE_LUT<<1)
+/** Used for switching BSD rings on the platforms with two BSD rings */
+#define I915_EXEC_BSD_MASK		(3<<13)
+#define I915_EXEC_BSD_DEFAULT		(0<<13) /* default ping-pong mode */
+#define I915_EXEC_BSD_RING1		(1<<13)
+#define I915_EXEC_BSD_RING2		(2<<13)
+
+#define __I915_EXEC_UNKNOWN_FLAGS -(1<<15)
 
 #define I915_EXEC_CONTEXT_ID_MASK	(0xffffffff)
 #define i915_execbuffer2_set_context_id(eb2, context) \
@@ -1073,4 +1093,12 @@ struct drm_i915_gem_userptr {
 	__u32 handle;
 };
 
+struct drm_i915_gem_context_param {
+	__u32 ctx_id;
+	__u32 size;
+	__u64 param;
+#define I915_CONTEXT_PARAM_BAN_PERIOD 0x1
+	__u64 value;
+};
+
 #endif /* _UAPI_I915_DRM_H_ */
diff --git a/include/video/exynos7_decon.h b/include/video/exynos7_decon.h
new file mode 100644
index 00000000000000..a62b11b613f652
--- /dev/null
+++ b/include/video/exynos7_decon.h
@@ -0,0 +1,349 @@
+/* include/video/exynos7_decon.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Ajay Kumar <ajaykumar.rs@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/* VIDCON0 */
+#define VIDCON0					0x00
+
+#define VIDCON0_SWRESET				(1 << 28)
+#define VIDCON0_DECON_STOP_STATUS		(1 << 2)
+#define VIDCON0_ENVID				(1 << 1)
+#define VIDCON0_ENVID_F				(1 << 0)
+
+/* VIDOUTCON0 */
+#define VIDOUTCON0				0x4
+
+#define VIDOUTCON0_DUAL_MASK			(0x3 << 24)
+#define VIDOUTCON0_DUAL_ON			(0x3 << 24)
+#define VIDOUTCON0_DISP_IF_1_ON			(0x2 << 24)
+#define VIDOUTCON0_DISP_IF_0_ON			(0x1 << 24)
+#define VIDOUTCON0_DUAL_OFF			(0x0 << 24)
+#define VIDOUTCON0_IF_SHIFT			23
+#define VIDOUTCON0_IF_MASK			(0x1 << 23)
+#define VIDOUTCON0_RGBIF			(0x0 << 23)
+#define VIDOUTCON0_I80IF			(0x1 << 23)
+
+/* VIDCON3 */
+#define VIDCON3					0x8
+
+/* VIDCON4 */
+#define VIDCON4					0xC
+#define VIDCON4_FIFOCNT_START_EN		(1 << 0)
+
+/* VCLKCON0 */
+#define VCLKCON0				0x10
+#define VCLKCON0_CLKVALUP			(1 << 8)
+#define VCLKCON0_VCLKFREE			(1 << 0)
+
+/* VCLKCON */
+#define VCLKCON1				0x14
+#define VCLKCON1_CLKVAL_NUM_VCLK(val)		(((val) & 0xff) << 0)
+#define VCLKCON2				0x18
+
+/* SHADOWCON */
+#define SHADOWCON				0x30
+
+#define SHADOWCON_WINx_PROTECT(_win)		(1 << (10 + (_win)))
+
+/* WINCONx */
+#define WINCON(_win)				(0x50 + ((_win) * 4))
+
+#define WINCONx_BUFSTATUS			(0x3 << 30)
+#define WINCONx_BUFSEL_MASK			(0x3 << 28)
+#define WINCONx_BUFSEL_SHIFT			28
+#define WINCONx_TRIPLE_BUF_MODE			(0x1 << 18)
+#define WINCONx_DOUBLE_BUF_MODE			(0x0 << 18)
+#define WINCONx_BURSTLEN_16WORD			(0x0 << 11)
+#define WINCONx_BURSTLEN_8WORD			(0x1 << 11)
+#define WINCONx_BURSTLEN_MASK			(0x1 << 11)
+#define WINCONx_BURSTLEN_SHIFT			11
+#define WINCONx_BLD_PLANE			(0 << 8)
+#define WINCONx_BLD_PIX				(1 << 8)
+#define WINCONx_ALPHA_MUL			(1 << 7)
+
+#define WINCONx_BPPMODE_MASK			(0xf << 2)
+#define WINCONx_BPPMODE_SHIFT			2
+#define WINCONx_BPPMODE_16BPP_565		(0x8 << 2)
+#define WINCONx_BPPMODE_24BPP_BGRx		(0x7 << 2)
+#define WINCONx_BPPMODE_24BPP_RGBx		(0x6 << 2)
+#define WINCONx_BPPMODE_24BPP_xBGR		(0x5 << 2)
+#define WINCONx_BPPMODE_24BPP_xRGB		(0x4 << 2)
+#define WINCONx_BPPMODE_32BPP_BGRA		(0x3 << 2)
+#define WINCONx_BPPMODE_32BPP_RGBA		(0x2 << 2)
+#define WINCONx_BPPMODE_32BPP_ABGR		(0x1 << 2)
+#define WINCONx_BPPMODE_32BPP_ARGB		(0x0 << 2)
+#define WINCONx_ALPHA_SEL			(1 << 1)
+#define WINCONx_ENWIN				(1 << 0)
+
+#define WINCON1_ALPHA_MUL_F			(1 << 7)
+#define WINCON2_ALPHA_MUL_F			(1 << 7)
+#define WINCON3_ALPHA_MUL_F			(1 << 7)
+#define WINCON4_ALPHA_MUL_F			(1 << 7)
+
+/*  VIDOSDxH: The height for the OSD image(READ ONLY)*/
+#define VIDOSD_H(_x)				(0x80 + ((_x) * 4))
+
+/* Frame buffer start addresses: VIDWxxADD0n */
+#define VIDW_BUF_START(_win)			(0x80 + ((_win) * 0x10))
+#define VIDW_BUF_START1(_win)			(0x84 + ((_win) * 0x10))
+#define VIDW_BUF_START2(_win)			(0x88 + ((_win) * 0x10))
+
+#define VIDW_WHOLE_X(_win)			(0x0130 + ((_win) * 8))
+#define VIDW_WHOLE_Y(_win)			(0x0134 + ((_win) * 8))
+#define VIDW_OFFSET_X(_win)			(0x0170 + ((_win) * 8))
+#define VIDW_OFFSET_Y(_win)			(0x0174 + ((_win) * 8))
+#define VIDW_BLKOFFSET(_win)			(0x01B0 + ((_win) * 4))
+#define VIDW_BLKSIZE(win)			(0x0200 + ((_win) * 4))
+
+/* Interrupt controls register */
+#define VIDINTCON2				0x228
+
+#define VIDINTCON1_INTEXTRA1_EN			(1 << 1)
+#define VIDINTCON1_INTEXTRA0_EN			(1 << 0)
+
+/* Interrupt controls and status register */
+#define VIDINTCON3				0x22C
+
+#define VIDINTCON1_INTEXTRA1_PEND		(1 << 1)
+#define VIDINTCON1_INTEXTRA0_PEND		(1 << 0)
+
+/* VIDOSDxA ~ VIDOSDxE */
+#define VIDOSD_BASE				0x230
+
+#define OSD_STRIDE				0x20
+
+#define VIDOSD_A(_win)				(VIDOSD_BASE + \
+						((_win) * OSD_STRIDE) + 0x00)
+#define VIDOSD_B(_win)				(VIDOSD_BASE + \
+						((_win) * OSD_STRIDE) + 0x04)
+#define VIDOSD_C(_win)				(VIDOSD_BASE + \
+						((_win) * OSD_STRIDE) + 0x08)
+#define VIDOSD_D(_win)				(VIDOSD_BASE + \
+						((_win) * OSD_STRIDE) + 0x0C)
+#define VIDOSD_E(_win)				(VIDOSD_BASE + \
+						((_win) * OSD_STRIDE) + 0x10)
+
+#define VIDOSDxA_TOPLEFT_X_MASK			(0x1fff << 13)
+#define VIDOSDxA_TOPLEFT_X_SHIFT		13
+#define VIDOSDxA_TOPLEFT_X_LIMIT		0x1fff
+#define VIDOSDxA_TOPLEFT_X(_x)			(((_x) & 0x1fff) << 13)
+
+#define VIDOSDxA_TOPLEFT_Y_MASK			(0x1fff << 0)
+#define VIDOSDxA_TOPLEFT_Y_SHIFT		0
+#define VIDOSDxA_TOPLEFT_Y_LIMIT		0x1fff
+#define VIDOSDxA_TOPLEFT_Y(_x)			(((_x) & 0x1fff) << 0)
+
+#define VIDOSDxB_BOTRIGHT_X_MASK		(0x1fff << 13)
+#define VIDOSDxB_BOTRIGHT_X_SHIFT		13
+#define VIDOSDxB_BOTRIGHT_X_LIMIT		0x1fff
+#define VIDOSDxB_BOTRIGHT_X(_x)			(((_x) & 0x1fff) << 13)
+
+#define VIDOSDxB_BOTRIGHT_Y_MASK		(0x1fff << 0)
+#define VIDOSDxB_BOTRIGHT_Y_SHIFT		0
+#define VIDOSDxB_BOTRIGHT_Y_LIMIT		0x1fff
+#define VIDOSDxB_BOTRIGHT_Y(_x)			(((_x) & 0x1fff) << 0)
+
+#define VIDOSDxC_ALPHA0_R_F(_x)			(((_x) & 0xFF) << 16)
+#define VIDOSDxC_ALPHA0_G_F(_x)			(((_x) & 0xFF) << 8)
+#define VIDOSDxC_ALPHA0_B_F(_x)			(((_x) & 0xFF) << 0)
+
+#define VIDOSDxD_ALPHA1_R_F(_x)			(((_x) & 0xFF) << 16)
+#define VIDOSDxD_ALPHA1_G_F(_x)			(((_x) & 0xFF) << 8)
+#define VIDOSDxD_ALPHA1_B_F(_x)			(((_x) & 0xFF) >> 0)
+
+/* Window MAP (Color map) */
+#define WINxMAP(_win)				(0x340 + ((_win) * 4))
+
+#define WINxMAP_MAP				(1 << 24)
+#define WINxMAP_MAP_COLOUR_MASK			(0xffffff << 0)
+#define WINxMAP_MAP_COLOUR_SHIFT		0
+#define WINxMAP_MAP_COLOUR_LIMIT		0xffffff
+#define WINxMAP_MAP_COLOUR(_x)			((_x) << 0)
+
+/* Window colour-key control registers */
+#define WKEYCON					0x370
+
+#define WKEYCON0				0x00
+#define WKEYCON1				0x04
+#define WxKEYCON0_KEYBL_EN			(1 << 26)
+#define WxKEYCON0_KEYEN_F			(1 << 25)
+#define WxKEYCON0_DIRCON			(1 << 24)
+#define WxKEYCON0_COMPKEY_MASK			(0xffffff << 0)
+#define WxKEYCON0_COMPKEY_SHIFT			0
+#define WxKEYCON0_COMPKEY_LIMIT			0xffffff
+#define WxKEYCON0_COMPKEY(_x)			((_x) << 0)
+#define WxKEYCON1_COLVAL_MASK			(0xffffff << 0)
+#define WxKEYCON1_COLVAL_SHIFT			0
+#define WxKEYCON1_COLVAL_LIMIT			0xffffff
+#define WxKEYCON1_COLVAL(_x)			((_x) << 0)
+
+/* color key control register for hardware window 1 ~ 4. */
+#define WKEYCON0_BASE(x)		((WKEYCON + WKEYCON0) + ((x - 1) * 8))
+/* color key value register for hardware window 1 ~ 4. */
+#define WKEYCON1_BASE(x)		((WKEYCON + WKEYCON1) + ((x - 1) * 8))
+
+/* Window KEY Alpha value */
+#define WxKEYALPHA(_win)			(0x3A0 + (((_win) - 1) * 0x4))
+
+#define Wx_KEYALPHA_R_F_SHIFT			16
+#define Wx_KEYALPHA_G_F_SHIFT			8
+#define Wx_KEYALPHA_B_F_SHIFT			0
+
+/* Blending equation */
+#define BLENDE(_win)				(0x03C0 + ((_win) * 4))
+#define BLENDE_COEF_ZERO			0x0
+#define BLENDE_COEF_ONE				0x1
+#define BLENDE_COEF_ALPHA_A			0x2
+#define BLENDE_COEF_ONE_MINUS_ALPHA_A		0x3
+#define BLENDE_COEF_ALPHA_B			0x4
+#define BLENDE_COEF_ONE_MINUS_ALPHA_B		0x5
+#define BLENDE_COEF_ALPHA0			0x6
+#define BLENDE_COEF_A				0xA
+#define BLENDE_COEF_ONE_MINUS_A			0xB
+#define BLENDE_COEF_B				0xC
+#define BLENDE_COEF_ONE_MINUS_B			0xD
+#define BLENDE_Q_FUNC(_v)			((_v) << 18)
+#define BLENDE_P_FUNC(_v)			((_v) << 12)
+#define BLENDE_B_FUNC(_v)			((_v) << 6)
+#define BLENDE_A_FUNC(_v)			((_v) << 0)
+
+/* Blending equation control */
+#define BLENDCON				0x3D8
+#define BLENDCON_NEW_MASK			(1 << 0)
+#define BLENDCON_NEW_8BIT_ALPHA_VALUE		(1 << 0)
+#define BLENDCON_NEW_4BIT_ALPHA_VALUE		(0 << 0)
+
+/* Interrupt control register */
+#define VIDINTCON0				0x500
+
+#define VIDINTCON0_WAKEUP_MASK			(0x3f << 26)
+#define VIDINTCON0_INTEXTRAEN			(1 << 21)
+
+#define VIDINTCON0_FRAMESEL0_SHIFT		15
+#define VIDINTCON0_FRAMESEL0_MASK		(0x3 << 15)
+#define VIDINTCON0_FRAMESEL0_BACKPORCH		(0x0 << 15)
+#define VIDINTCON0_FRAMESEL0_VSYNC		(0x1 << 15)
+#define VIDINTCON0_FRAMESEL0_ACTIVE		(0x2 << 15)
+#define VIDINTCON0_FRAMESEL0_FRONTPORCH		(0x3 << 15)
+
+#define VIDINTCON0_INT_FRAME			(1 << 11)
+
+#define VIDINTCON0_FIFOLEVEL_MASK		(0x7 << 3)
+#define VIDINTCON0_FIFOLEVEL_SHIFT		3
+#define VIDINTCON0_FIFOLEVEL_EMPTY		(0x0 << 3)
+#define VIDINTCON0_FIFOLEVEL_TO25PC		(0x1 << 3)
+#define VIDINTCON0_FIFOLEVEL_TO50PC		(0x2 << 3)
+#define VIDINTCON0_FIFOLEVEL_FULL		(0x4 << 3)
+
+#define VIDINTCON0_FIFOSEL_MAIN_EN		(1 << 1)
+#define VIDINTCON0_INT_FIFO			(1 << 1)
+
+#define VIDINTCON0_INT_ENABLE			(1 << 0)
+
+/* Interrupt controls and status register */
+#define VIDINTCON1				0x504
+
+#define VIDINTCON1_INT_EXTRA			(1 << 3)
+#define VIDINTCON1_INT_I80			(1 << 2)
+#define VIDINTCON1_INT_FRAME			(1 << 1)
+#define VIDINTCON1_INT_FIFO			(1 << 0)
+
+/* VIDCON1 */
+#define VIDCON1(_x)				(0x0600 + ((_x) * 0x50))
+#define VIDCON1_LINECNT_GET(_v)			(((_v) >> 17) & 0x1fff)
+#define VIDCON1_VCLK_MASK			(0x3 << 9)
+#define VIDCON1_VCLK_HOLD			(0x0 << 9)
+#define VIDCON1_VCLK_RUN			(0x1 << 9)
+#define VIDCON1_VCLK_RUN_VDEN_DISABLE		(0x3 << 9)
+#define VIDCON1_RGB_ORDER_O_MASK		(0x7 << 4)
+#define VIDCON1_RGB_ORDER_O_RGB			(0x0 << 4)
+#define VIDCON1_RGB_ORDER_O_GBR			(0x1 << 4)
+#define VIDCON1_RGB_ORDER_O_BRG			(0x2 << 4)
+#define VIDCON1_RGB_ORDER_O_BGR			(0x4 << 4)
+#define VIDCON1_RGB_ORDER_O_RBG			(0x5 << 4)
+#define VIDCON1_RGB_ORDER_O_GRB			(0x6 << 4)
+
+/* VIDTCON0 */
+#define VIDTCON0				0x610
+
+#define VIDTCON0_VBPD_MASK			(0xffff << 16)
+#define VIDTCON0_VBPD_SHIFT			16
+#define VIDTCON0_VBPD_LIMIT			0xffff
+#define VIDTCON0_VBPD(_x)			((_x) << 16)
+
+#define VIDTCON0_VFPD_MASK			(0xffff << 0)
+#define VIDTCON0_VFPD_SHIFT			0
+#define VIDTCON0_VFPD_LIMIT			0xffff
+#define VIDTCON0_VFPD(_x)			((_x) << 0)
+
+/* VIDTCON1 */
+#define VIDTCON1				0x614
+
+#define VIDTCON1_VSPW_MASK			(0xffff << 16)
+#define VIDTCON1_VSPW_SHIFT			16
+#define VIDTCON1_VSPW_LIMIT			0xffff
+#define VIDTCON1_VSPW(_x)			((_x) << 16)
+
+/* VIDTCON2 */
+#define VIDTCON2				0x618
+
+#define VIDTCON2_HBPD_MASK			(0xffff << 16)
+#define VIDTCON2_HBPD_SHIFT			16
+#define VIDTCON2_HBPD_LIMIT			0xffff
+#define VIDTCON2_HBPD(_x)			((_x) << 16)
+
+#define VIDTCON2_HFPD_MASK			(0xffff << 0)
+#define VIDTCON2_HFPD_SHIFT			0
+#define VIDTCON2_HFPD_LIMIT			0xffff
+#define VIDTCON2_HFPD(_x)			((_x) << 0)
+
+/* VIDTCON3 */
+#define VIDTCON3				0x61C
+
+#define VIDTCON3_HSPW_MASK			(0xffff << 16)
+#define VIDTCON3_HSPW_SHIFT			16
+#define VIDTCON3_HSPW_LIMIT			0xffff
+#define VIDTCON3_HSPW(_x)			((_x) << 16)
+
+/* VIDTCON4 */
+#define VIDTCON4				0x620
+
+#define VIDTCON4_LINEVAL_MASK			(0xfff << 16)
+#define VIDTCON4_LINEVAL_SHIFT			16
+#define VIDTCON4_LINEVAL_LIMIT			0xfff
+#define VIDTCON4_LINEVAL(_x)			(((_x) & 0xfff) << 16)
+
+#define VIDTCON4_HOZVAL_MASK			(0xfff << 0)
+#define VIDTCON4_HOZVAL_SHIFT			0
+#define VIDTCON4_HOZVAL_LIMIT			0xfff
+#define VIDTCON4_HOZVAL(_x)			(((_x) & 0xfff) << 0)
+
+/* LINECNT OP THRSHOLD*/
+#define LINECNT_OP_THRESHOLD			0x630
+
+/* CRCCTRL */
+#define CRCCTRL					0x6C8
+#define CRCCTRL_CRCCLKEN			(0x1 << 2)
+#define CRCCTRL_CRCSTART_F			(0x1 << 1)
+#define CRCCTRL_CRCEN				(0x1 << 0)
+
+/* DECON_CMU */
+#define DECON_CMU				0x704
+
+#define DECON_CMU_ALL_CLKGATE_ENABLE		0x3
+#define DECON_CMU_SE_CLKGATE_ENABLE		(0x1 << 2)
+#define DECON_CMU_SFR_CLKGATE_ENABLE		(0x1 << 1)
+#define DECON_CMU_MEM_CLKGATE_ENABLE		(0x1 << 0)
+
+/* DECON_UPDATE */
+#define DECON_UPDATE				0x710
+
+#define DECON_UPDATE_SLAVE_SYNC			(1 << 4)
+#define DECON_UPDATE_STANDALONE_F		(1 << 0)
diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h
index c74bf4a0520e58..73390c120cad03 100644
--- a/include/video/imx-ipu-v3.h
+++ b/include/video/imx-ipu-v3.h
@@ -17,6 +17,7 @@
 #include <linux/bitmap.h>
 #include <linux/fb.h>
 #include <media/v4l2-mediabus.h>
+#include <video/videomode.h>
 
 struct ipu_soc;
 
@@ -32,28 +33,15 @@ enum ipuv3_type {
  * Bitfield of Display Interface signal polarities.
  */
 struct ipu_di_signal_cfg {
-	unsigned datamask_en:1;
-	unsigned interlaced:1;
-	unsigned odd_field_first:1;
-	unsigned clksel_en:1;
-	unsigned clkidle_en:1;
 	unsigned data_pol:1;	/* true = inverted */
 	unsigned clk_pol:1;	/* true = rising edge */
 	unsigned enable_pol:1;
-	unsigned Hsync_pol:1;	/* true = active high */
-	unsigned Vsync_pol:1;
 
-	u16 width;
-	u16 height;
+	struct videomode mode;
+
 	u32 pixel_fmt;
-	u16 h_start_width;
-	u16 h_sync_width;
-	u16 h_end_width;
-	u16 v_start_width;
-	u16 v_sync_width;
-	u16 v_end_width;
 	u32 v_to_h_sync;
-	unsigned long pixelclock;
+
 #define IPU_DI_CLKMODE_SYNC	(1 << 0)
 #define IPU_DI_CLKMODE_EXT	(1 << 1)
 	unsigned long clkflags;
@@ -236,6 +224,7 @@ void ipu_di_put(struct ipu_di *);
 int ipu_di_disable(struct ipu_di *);
 int ipu_di_enable(struct ipu_di *);
 int ipu_di_get_num(struct ipu_di *);
+int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode);
 int ipu_di_init_sync_panel(struct ipu_di *, struct ipu_di_signal_cfg *sig);
 
 /*