Age | Commit message (Expand) | Author | Files | Lines |
2013-12-19 | Merge branch 'master' of git://git.denx.de/u-boot-spi | Tom Rini | 5 | -14/+294 |
2013-12-19 | driver: mtd: sf_ops: claim bus while doing memcpy | Poddar, Sourav | 1 | -0/+6 |
2013-12-18 | Merge branch 'master' of git://git.denx.de/u-boot-nand-flash | Tom Rini | 2 | -48/+62 |
2013-12-18 | usb: ehci: Fix register access | Marek Vasut | 1 | -1/+1 |
2013-12-18 | usb: ehci: Do not de-init uninited controllers | Marek Vasut | 1 | -0/+3 |
2013-12-18 | usb: ehci-pci: Clarify and cleanup the EHCI controller detection | Marek Vasut | 1 | -3/+25 |
2013-12-18 | usb: f_dfu: cosmetic: Code cleanup | Lukasz Majewski | 1 | -2/+2 |
2013-12-18 | usb: dfu: f_dfu: Provide infrastructure to adjust DFU's Poll Timeout value | Lukasz Majewski | 2 | -3/+38 |
2013-12-18 | dfu: Export allocated dfu buffer size | Lukasz Majewski | 1 | -0/+5 |
2013-12-19 | spi: tegra: clear RDY bit prior to every transfer | Yen Lin | 1 | -13/+8 |
2013-12-18 | spi: Add support SH Quad SPI driver | Nobuhiro Iwamatsu | 2 | -0/+278 |
2013-12-18 | sf: probe: add support for MX25L2006E | Luka Perkov | 1 | -0/+1 |
2013-12-18 | sf: probe: Hex values are in lower case | Luka Perkov | 1 | -1/+1 |
2013-12-18 | serial_sh: add support for SH7753 | Yoshihiro Shimoda | 1 | -1/+3 |
2013-12-18 | net: sh-eth: add support for SH7753 | Yoshihiro Shimoda | 1 | -2/+6 |
2013-12-17 | mtd: nand: omap: fix ecc ops assignment when changing ecc | Nikita Kiryanov | 1 | -0/+3 |
2013-12-17 | mtd: nand: omap: fix sw->hw->sw ecc switch | Nikita Kiryanov | 1 | -1/+6 |
2013-12-17 | nand_util.c: Use '%zd' for length in nand_unlock debug print | Tom Rini | 1 | -1/+1 |
2013-12-17 | mtd: nand: omap: fix HAM1_SW ecc using default value for ecc.size | Nikita Kiryanov | 1 | -1/+1 |
2013-12-17 | mtd: nand: omap_gpmc: cosmetic: Fix indentation | Stefan Roese | 1 | -43/+45 |
2013-12-17 | mtd: nand: omap: fix ecc-layout for HAM1 ecc-scheme | pekon gupta | 1 | -2/+6 |
2013-12-16 | Merge branch 'master' of git://git.denx.de/u-boot-video | Tom Rini | 1 | -1/+1 |
2013-12-13 | drivers/mtd: descend into sub directories only when it is necessary | Masahiro Yamada | 2 | -6/+0 |
2013-12-13 | drivers/usb/gadget: select objects by obj-$(CONFIG-...) | Masahiro Yamada | 1 | -6/+2 |
2013-12-13 | serial: lpc32xx: send CR before LF | Vladimir Zapolskiy | 1 | -0/+3 |
2013-12-11 | net/fman: add ft_fixup_xgec to support 3rd and 4th 10GEC | Shengzhou Liu | 1 | -1/+52 |
2013-12-10 | Merge branch 'master' of git://git.denx.de/u-boot-arm | Tom Rini | 15 | -72/+193 |
2013-12-10 | Merge branch 'u-boot/master' into 'u-boot-arm/master' | Albert ARIBAUD | 73 | -1240/+10471 |
2013-12-10 | Merge branch 'spi' of git://git.denx.de/u-boot-x86 | Tom Rini | 9 | -12/+738 |
2013-12-10 | Merge branch 'master' of git://git.denx.de/u-boot-mmc | Tom Rini | 5 | -18/+58 |
2013-12-10 | Merge branch 'master' of git://git.denx.de/u-boot-i2c | Tom Rini | 4 | -251/+393 |
2013-12-10 | serial: zynq: Remove unused #defines | Soren Brinkmann | 1 | -4/+0 |
2013-12-09 | sandbox: spi: Add new SPI flash driver | Mike Frysinger | 4 | -1/+487 |
2013-12-09 | sandbox: spi: Add SPI emulation bus | Mike Frysinger | 2 | -0/+205 |
2013-12-09 | spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node | Simon Glass | 4 | -11/+46 |
2013-12-09 | at91: nand: switch atmel_nand to generic GPIO API | Andreas Bießmann | 1 | -5/+3 |
2013-12-09 | at91: add new gpio pin definitions | Andreas Bießmann | 1 | -3/+1 |
2013-12-08 | mmc: add Faraday FTSDC021 SDHCI controller support | Kuo-Jung Su | 2 | -0/+34 |
2013-12-08 | powerpc: mmc: Add corenet devices support in esdhc spl | Priyanka Jain | 1 | -0/+5 |
2013-12-08 | mmc/dwmmc: modify FIFO threshold only if value explicitly set | Alexey Brodkin | 1 | -7/+2 |
2013-12-08 | mmc: dw_mmc: remove the exynos specific code in dw-mmc.c | Jaehoon Chung | 2 | -10/+16 |
2013-12-06 | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' | Albert ARIBAUD | 2 | -2/+12 |
2013-12-06 | Merge branch 'master' of git://git.denx.de/u-boot-blackfin | Tom Rini | 2 | -12/+10 |
2013-12-06 | usb: ehci-omap: Reset the USB Host OMAP module | Roger Quadros | 1 | -15/+42 |
2013-12-06 | spi: bfin_spi6xx: Remove unnecessary test for bus and pins[bus] | Axel Lin | 1 | -4/+1 |
2013-12-06 | spi: bfin_spi: Remove unnecessary test for bus and pins[bus] | Axel Lin | 1 | -8/+9 |
2013-12-06 | i2c: samsung: register i2c busses for Exynso5420 and Exynos5250 | Naveen Krishna Ch | 1 | -48/+176 |
2013-12-05 | arm: omap: i2c: don't zero cnt in i2c_write | Nikita Kiryanov | 1 | -6/+0 |
2013-12-05 | i2c: fti2c010: serial out r/w address in MSB order | Kuo-Jung Su | 1 | -8/+18 |
2013-12-05 | i2c: fti2c010: migrate to new i2c model | Kuo-Jung Su | 1 | -166/+133 |
2013-12-05 | i2c: fti2c010: cosmetic: coding style cleanup | Kuo-Jung Su | 1 | -15/+16 |
2013-12-05 | driver:i2c:s3c24x0: fix clock init for hsi2c | Piotr Wilczek | 1 | -1/+3 |
2013-12-05 | driver:i2c:s3c24x0: adapt driver to new i2c | Piotr Wilczek | 2 | -57/+97 |
2013-12-04 | powerpc: spiflash:Add corenet devices support in eSPI SPL | Priyanka Jain | 1 | -0/+5 |
2013-12-04 | am335x: cpsw: optimize cpsw_recv to increase network performance | Vladimir Koutny | 1 | -1/+1 |
2013-12-04 | ahci: Fix cache align error messages | Roger Quadros | 1 | -7/+1 |
2013-12-04 | ahci: Error out with message on malloc() failure | Roger Quadros | 1 | -2/+14 |
2013-12-04 | ARMV7: OMAP4: Add twl6032 support | Oleg Kosheliev | 1 | -6/+48 |
2013-12-04 | ARMV7: OMAP4: Add struct for twl603x data | Oleg Kosheliev | 1 | -5/+20 |
2013-12-04 | video: ipu_disp: Return a negative value on error | Fabio Estevam | 1 | -1/+1 |
2013-12-02 | Merge branch 'serial' of git://git.denx.de/u-boot-microblaze | Tom Rini | 1 | -4/+0 |
2013-12-02 | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx | Tom Rini | 24 | -8/+8496 |
2013-12-02 | serial: zynq: Remove unused #defines | Soren Brinkmann | 1 | -4/+0 |
2013-12-02 | driver:usb:s3c_udc: add support for Exynos4x12 | Piotr Wilczek | 2 | -2/+12 |
2013-11-25 | powerpc/mpc85xx: Add T2080/T2081 SoC support | Shengzhou Liu | 2 | -0/+93 |
2013-11-25 | net/fman: Add support for 10GEC3 and 10GEC4 | Shengzhou Liu | 3 | -6/+26 |
2013-11-25 | Driver/IFC: Move Freescale IFC driver to a common driver | York Sun | 4 | -2/+143 |
2013-11-25 | Driver/DDR: Update DDR driver to allow non-zero base address | York Sun | 1 | -3/+3 |
2013-11-25 | powerpc/mpc8xxx: Extend DDR registers' fields | York Sun | 1 | -8/+12 |
2013-11-25 | Driver/DDR: Add Freescale DDR driver for ARM | York Sun | 4 | -4/+227 |
2013-11-25 | Driver/DDR: combine ccsr_ddr for 83xx, 85xx and 86xx | York Sun | 6 | -8/+14 |
2013-11-25 | Driver/DDR: Moving Freescale DDR driver to a common driver | York Sun | 14 | -0/+7977 |
2013-11-25 | Merge branch 'master' of git://git.denx.de/u-boot-net | Tom Rini | 19 | -193/+473 |
2013-11-25 | Merge branch 'master' of git://git.denx.de/u-boot-nand-flash | Tom Rini | 7 | -151/+528 |
2013-11-25 | bios_emulator: delete an unnecessary include path | Masahiro Yamada | 1 | -1/+1 |
2013-11-25 | drivers: delete unnecessary HOSTCFLAGS | Masahiro Yamada | 2 | -2/+0 |
2013-11-25 | gpio_led: add support for inverted polarity | Igor Grinberg | 1 | -2/+25 |
2013-11-25 | gpio_led: check gpio_request() return value | Igor Grinberg | 1 | -1/+5 |
2013-11-22 | net: rtl8169: Add support for RTL8168d/8111d | Thierry Reding | 1 | -1/+17 |
2013-11-22 | net: rtl8169: Improve cache maintenance | Thierry Reding | 1 | -8/+53 |
2013-11-22 | net: zynq_gem: Add d-cache support | Srikanth Thokala | 1 | -29/+53 |
2013-11-22 | phy: Use general phy code for smsc lan8720a | David Dueck | 1 | -1/+2 |
2013-11-22 | phy: Use supported field during autonegotiation | David Dueck | 1 | -2/+3 |
2013-11-22 | net: dm9000: random mac address support | Andrew Ruder | 1 | -0/+9 |
2013-11-22 | drivers/net/e1000: Introduce CONFIG_E1000_NO_NVM | Rojhalat Ibrahim | 2 | -5/+38 |
2013-11-22 | net: phy: atheros: Fix masks for AR8035 and AR8021 | Fabio Estevam | 1 | -1/+1 |
2013-11-22 | net/phy: Fix the phy id mask of AR8031 | Chunhe Lan | 1 | -1/+1 |
2013-11-22 | net: tsec: Fix mac addr setup portability, cleanup | Claudiu Manoil | 1 | -10/+8 |
2013-11-22 | net: tsec: Use portable regs type (uint->u32) | Claudiu Manoil | 1 | -1/+1 |
2013-11-22 | net: tsec: Use portable types and accessors for BDs | Claudiu Manoil | 1 | -42/+46 |
2013-11-22 | net: tsec: Fix CamelCase issues around BD code | Claudiu Manoil | 1 | -30/+30 |
2013-11-22 | net: fsl_mdio: Fix warnings for __iomem pointers | Claudiu Manoil | 1 | -7/+10 |
2013-11-22 | net: tsec: Cleanup tsec regs init and fix __iomem warns | Claudiu Manoil | 1 | -13/+13 |
2013-11-22 | net: tsec: Fix priv pointer in tsec_mcast_addr() | Claudiu Manoil | 1 | -7/+1 |
2013-11-22 | net: tsec: Fix and cleanup tsec_mcast_addr() | Claudiu Manoil | 1 | -16/+15 |
2013-11-22 | net: Fix mcast function pointer prototype | Claudiu Manoil | 2 | -3/+3 |
2013-11-22 | net: designware: Fix alignment of buffer descriptors | Alexey Brodkin | 1 | -4/+3 |
2013-11-22 | net: designware: Respect "bus mode" register contents on SW reset | Alexey Brodkin | 1 | -1/+1 |
2013-11-22 | net: sh-eth: Add support R8A7791 | Nobuhiro Iwamatsu | 2 | -4/+5 |
2013-11-22 | net, phy: fix AR8031 phy_mask | Heiko Schocher | 1 | -1/+1 |
2013-11-22 | net: rtl8169: Add support for RTL8168evl/8111evl | Thierry Reding | 1 | -0/+1 |
2013-11-22 | net: rtl8169: Fix format string | Thierry Reding | 1 | -5/+5 |
2013-11-22 | net: add function to read/write extended registers in Micrel Phy | Stefano Babic | 1 | -0/+32 |
2013-11-22 | net: fix mask for phy Micrel KSZ9031 | Stefano Babic | 1 | -1/+1 |
2013-11-22 | net/phy: realtek: Fix the PHY ID mask to ensure the correct Realtek PHY is de... | Bhupesh Sharma | 1 | -3/+3 |
2013-11-22 | net: phy/vitesse: Add support for VSC8514 phy module | Arpit Goel | 1 | -1/+68 |
2013-11-22 | net: sh-eth: Add support R8A7790 | Nobuhiro Iwamatsu | 2 | -1/+11 |
2013-11-22 | net: sh-eth: Add invalidate cache control for rmobile (ARM SoC) | Nobuhiro Iwamatsu | 1 | -5/+26 |
2013-11-22 | net: sh-eth: Add control for padding size of packet descriptor | Nobuhiro Iwamatsu | 2 | -10/+30 |
2013-11-22 | net: sh-eth: Change cache API of SH | Nobuhiro Iwamatsu | 1 | -1/+2 |
2013-11-22 | NET: mvgbe: avoid unused variable warning when used without phylib support | Sascha Silbe | 1 | -2/+3 |
2013-11-22 | phylib: update atheros ar803x phy | Shengzhou Liu | 1 | -2/+2 |
2013-11-21 | mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme | pekon gupta | 1 | -9/+4 |
2013-11-21 | mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform | pekon gupta | 1 | -125/+201 |
2013-11-21 | mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx ... | pekon gupta | 3 | -1/+198 |
2013-11-21 | mtd: atmel_nand: use dev_xxx instead of printk | Wu, Josh | 1 | -11/+11 |
2013-11-21 | mtd: atmel_nand: don't print bit correction message in driver | Wu, Josh | 1 | -2/+2 |
2013-11-21 | mtd: atmel_nand: enable PMECC support for 8k bytes page NAND flash | Wu, Josh | 1 | -1/+9 |
2013-11-21 | mtd/ifc: Add support of 8K page size NAND flash | Prabhakar Kushwaha | 2 | -2/+83 |
2013-11-21 | mtd: move & update nand_ecclayout structure (plus board changes) | Prabhakar Kushwaha | 1 | -5/+10 |
2013-11-17 | drivers/net/npe: descend only when CONFIG_IXP4XX_NPE=y | Masahiro Yamada | 1 | -1/+1 |
2013-11-17 | drivers/net/fm: descend only when CONFIG_FMAN_ENET=y | Masahiro Yamada | 1 | -2/+0 |
2013-11-17 | drivers/qe: move the entry to drivers/Makefile | Masahiro Yamada | 2 | -2/+3 |
2013-11-17 | Makefile: make directories by Makefile.build | Masahiro Yamada | 1 | -2/+0 |
2013-11-17 | drivers: tpm: clean up unused code | Masahiro Yamada | 2 | -187/+0 |
2013-11-17 | drivers: descend into sub directories only when it is necessary | Masahiro Yamada | 3 | -5/+3 |
2013-11-14 | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx | Tom Rini | 1 | -0/+3 |
2013-11-13 | driver/mtd/ifc: Read Status while programming NAND flash | Prabhakar Kushwaha | 1 | -5/+16 |
2013-11-13 | MTD: atmel_nand: support for software BCH ECC | Bo Shen | 1 | -0/+4 |
2013-11-13 | net: remove unused CONFIG_AT91_LEGACY | Andreas Bießmann | 1 | -9/+0 |
2013-11-13 | i2c: switch from AT91 legacy to ATMEL legacy | Andreas Bießmann | 1 | -1/+1 |
2013-11-13 | video: remove AT91 legacy API from bus_vcxk | Andreas Bießmann | 1 | -15/+0 |
2013-11-13 | powerpc/t1040: Update defines to support T1040SoC personalities | Priyanka Jain | 1 | -0/+3 |
2013-11-13 | designware_i2c: remove 10msec delay in i2c_xfer_finish | Alexey Brodkin | 1 | -3/+0 |
2013-11-13 | designware_i2c: disable i2c controller during target address setup | Alexey Brodkin | 1 | -0/+12 |
2013-11-13 | i2c, omap1510: remove i2c driver | Heiko Schocher | 2 | -278/+0 |
2013-11-13 | i2c, zynq: convert zynq i2c driver to new multibus/multiadapter framework | Heiko Schocher | 2 | -14/+17 |
2013-11-13 | i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework | Heiko Schocher | 2 | -66/+110 |
2013-11-13 | i2c: mxs_i2c: Squash endless loop | Marek Vasut | 1 | -3/+12 |
2013-11-13 | i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework | Nobuhiro Iwamatsu | 2 | -164/+132 |
2013-11-12 | usb, g_dnl: make bcdDevice value configurable | Heiko Schocher | 1 | -4/+19 |
2013-11-12 | lcd: add DataImage SCF0403x LCD panel support | Nikita Kiryanov | 2 | -0/+297 |
2013-11-12 | spi: omap3: add support for more word lengths | Nikita Kiryanov | 3 | -24/+66 |
2013-11-12 | spi: omap3: remove semicolon from #define | Nikita Kiryanov | 1 | -1/+1 |
2013-11-12 | video: bcm2835: respect the pitch value | Andre Heider | 1 | -0/+11 |
2013-11-11 | MPC824x: remove obsolete "PN62" board | Wolfgang Denk | 1 | -10/+0 |
2013-11-11 | am33xx: Make SoC bootcount driver have its own symbol | Tom Rini | 2 | -1/+5 |
2013-11-11 | bootcount: store bootcount var in environment | Heiko Schocher | 2 | -0/+30 |
2013-11-11 | Merge branch 'master' of git://git.denx.de/u-boot-mips | Tom Rini | 4 | -126/+281 |
2013-11-09 | Merge branch 'iu-boot/master' into 'u-boot-arm/master' | Albert ARIBAUD | 8 | -21/+66 |
2013-11-09 | malta: enable RTC support | Paul Burton | 1 | -1/+1 |
2013-11-09 | malta: support for coreFPGA6 boards | Paul Burton | 2 | -0/+126 |
2013-11-09 | pcnet: enable the NOUFLO feature | Paul Burton | 1 | -0/+15 |
2013-11-09 | pcnet: add cache flushing & invalidation | Paul Burton | 1 | -0/+16 |
2013-11-09 | pcnet: s/le16_to_cpu/cpu_to_le16/ in pcnet_send | Paul Burton | 1 | -2/+2 |
2013-11-09 | pcnet: code style cleanup | Paul Burton | 1 | -125/+123 |
2013-11-08 | Merge branch 'master' of git://www.denx.de/git/u-boot-usb | Tom Rini | 6 | -50/+70 |
2013-11-08 | netconsole loses 2nd character of input | Suriyan Ramasami | 1 | -0/+2 |
2013-11-08 | serial: s5p: Staticize local functions | Axel Lin | 1 | -12/+12 |
2013-11-08 | serial: xuartlite: Staticize local functions | Axel Lin | 1 | -10/+10 |
2013-11-08 | serial: mxs_auart: Staticize local functions | Axel Lin | 1 | -5/+5 |
2013-11-08 | usb: dfu: make nand upload working | Bo Shen | 1 | -0/+1 |
2013-11-08 | usb, g_dnl: make iSerialNumber board configurable | Heiko Schocher | 1 | -0/+20 |
2013-11-08 | usb: dfu: correct dfu buffer inited value | Bo Shen | 1 | -1/+1 |
2013-11-08 | usb: dfu: decrease dfu->r_left along with the transfer | Bo Shen | 1 | -0/+1 |
2013-11-08 | usb: ohci-hcd: submit_common_msg: report actual_length properly | Mateusz Kulikowski | 1 | -1/+1 |
2013-11-08 | usb: ums: add ums exit feature by ctrl+c or by detach usb cable | Przemyslaw Marczak | 1 | -3/+21 |
2013-11-08 | usb: ums: fix disk capacity miscalculation and code cleanup | Przemyslaw Marczak | 1 | -23/+3 |
2013-11-08 | usb: ums: code refactoring to improve reusability on other boards. | Przemyslaw Marczak | 2 | -23/+23 |
2013-11-08 | cosmetic: remove empty lines at the top of file | Masahiro Yamada | 3 | -3/+0 |
2013-11-08 | Add support for SX151x SPI GPIO Expanders | Viktar Palstsiuk | 2 | -0/+243 |
2013-11-07 | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' | Albert ARIBAUD | 1 | -1/+2 |
2013-11-06 | fpga: zynqpl: Do not place bitstream below 1MB | Michal Simek | 1 | -0/+7 |
2013-11-06 | fpga: zynqpl: Add dcache flush support | Jagannadha Sutradharudu Teki | 1 | -2/+6 |
2013-11-05 | Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' | Albert ARIBAUD | 3 | -10/+40 |
2013-11-04 | arm: atmel: get rid of too many ifdeffery | Bo Shen | 1 | -10/+4 |
2013-11-04 | arm: atmel: at91sam9n12ek: add usb host support | Bo Shen | 1 | -2/+9 |
2013-11-04 | net: macb: get DMA bus width from design config register | Bo Shen | 2 | -1/+30 |
2013-11-04 | Merge branch 'master' of git://git.denx.de/u-boot-blackfin | Tom Rini | 1 | -17/+0 |
2013-11-04 | blackfin: Move machine specific gpio_port_t structure back to blackfin arch f... | Steven Miao | 1 | -17/+0 |
2013-11-01 | nand, davinci: add special UBL ecc position | Heiko Schocher | 1 | -0/+12 |
2013-11-01 | TI:am33xx: Add bootcount support to ti_am335x_common.h | Tom Rini | 1 | -0/+1 |
2013-11-01 | bootcount_davinci: Switch to scratch register #2 | Tom Rini | 1 | -4/+6 |
2013-11-01 | am33xx, davinci: Create and use <asm/davinci_rtc.h> | Tom Rini | 2 | -3/+2 |
2013-11-01 | drivers/rtc/davinci.c: Reference DAVINCI_RTC_BASE more directly | Tom Rini | 1 | -3/+3 |
2013-10-31 | drivers: move some drivers to drivers/Makefile | Masahiro Yamada | 1 | -0/+15 |
2013-10-31 | drivers: convert makefiles to Kbuild style | Masahiro Yamada | 29 | -979/+341 |
2013-10-31 | drivers: usb: convert makefiles to Kbuild style | Masahiro Yamada | 7 | -224/+69 |
2013-10-31 | drivers: mtd: convert makefiles to Kbuild style | Masahiro Yamada | 5 | -174/+63 |
2013-10-31 | drivers: net: convert makefiles to Kbuild style | Masahiro Yamada | 4 | -184/+97 |
2013-10-31 | imx_watchdog: do not soft-reset while watchdog init | Anatolij Gustschin | 1 | -1/+2 |
2013-10-31 | nand_util.c: Correct licensing | Tom Rini | 1 | -1/+3 |
2013-10-31 | powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register | Haijun.Zhang | 1 | -0/+6 |
2013-10-31 | esdhc: memset mmc struct before putting into use | Haijun.Zhang | 1 | -0/+1 |
2013-10-31 | Powerpc/esdhc: Add simple description of esdhc register | Haijun.Zhang | 1 | -37/+37 |
2013-10-31 | powerpc/esdhc: Map register for eSDHC Host Controller V3.0 | Haijun.Zhang | 1 | -2/+14 |
2013-10-31 | DWMMC: SMDK5420: Disable SMU for eMMC | Rajeshwari Shinde | 2 | -0/+14 |
2013-10-31 | mmc: sdhci: Avoid commands errors by simple timeout adaptation. | Przemyslaw Marczak | 1 | -7/+28 |
2013-10-31 | mmc: dw_mmc: change the callback function name. | Jaehoon Chung | 2 | -4/+4 |
2013-10-31 | mmc: Fix erase_grp_size for partitioned card | Oliver Metz | 1 | -4/+13 |