| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix the TLBI RANGE operand calculation causing live migration under
KVM/arm64 to miss dirty pages due to stale TLB entries"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tlb: Fix TLBI RANGE operand
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The device tree changes this time are all for NXP i.MX platforms,
addressing issues with clocks and regulators on i.MX7 and i.MX8.
The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
regressions that came in.
The ARM SCMI and FF-A firmware interfaces get a couple of minor bug
fixes.
A regression fix for RISC-V cache management addresses a problem with
probe order on Sifive cores"
* tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
MAINTAINERS: Change Krzysztof Kozlowski's email address
arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix adc lpcg indices
arm64: dts: imx8-ss-dma: fix pwm lpcg indices
arm64: dts: imx8-ss-dma: fix spi lpcg indices
arm64: dts: imx8-ss-conn: fix usb lpcg indices
arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
ARM: dts: imx7-mba7: Use 'no-mmc' property
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
cache: sifive_ccache: Partially convert to a platform driver
firmware: arm_scmi: Make raw debugfs entries non-seekable
firmware: arm_scmi: Fix wrong fastchannel initialization
firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
ARM: OMAP2+: fix USB regression on Nokia N8x0
mmc: omap: restore original power up/down steps
mmc: omap: fix deferred probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d Fixes:
- Allocate local memory for PRQ page
- Fix WARN_ON in iommu probe path
- Fix wrong use of pasid config
- AMD IOMMU Fixes:
- Lock inversion fix
- Log message severity fix
- Disable SNP when v2 page-tables are used
- Mediatek driver:
- Fix module autoloading
* tag 'iommu-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Change log message severity
iommu/vt-d: Fix WARN_ON in iommu probe path
iommu/vt-d: Allocate local memory for page request queue
iommu/vt-d: Fix wrong use of pasid config
iommu: mtk: fix module autoloading
iommu/amd: Do not enable SNP when V2 page table is enabled
iommu/amd: Fix possible irq lock inversion dependency issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Revert a quirk that prevented Secondary Bus Reset for LSI / Agere
FW643.
We thought the device was broken, but the reset does work correctly
on other platforms, and the reset avoids leaking data out of VMs
(Bjorn Helgaas)
- Update MAINTAINERS to reflect that Gustavo Pimentel is no longer
reachable (Manivannan Sadhasivam)
* tag 'pci-v6.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: Mark LSI FW643 to avoid bus reset"
MAINTAINERS: Drop Gustavo Pimentel as PCI DWC Maintainer
|
|
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- UAF fix (Yu)
- Avoid out-of-bounds shift in blk-iocost (Rik)
- Fix for q->blkg_list corruption (Ming)
- Relax virt boundary mask/size segment checking (Ming)
* tag 'block-6.9-20240412' of git://git.kernel.dk/linux:
block: fix that blk_time_get_ns() doesn't update time after schedule
block: allow device to have both virt_boundary_mask and max segment size
block: fix q->blkg_list corruption during disk rebind
blk-iocost: avoid out of bounds shift
raid1: fix use-after-free for original bio in raid1_write_request()
|
|
Pull io_uring fixes from Jens Axboe:
- Fix for sigmask restoring while waiting for events (Alexey)
- Typo fix in comment (Haiyue)
- Fix for a msg_control retstore on SEND_ZC retries (Pavel)
* tag 'io_uring-6.9-20240412' of git://git.kernel.dk/linux:
io-uring: correct typo in comment for IOU_F_TWQ_LAZY_WAKE
io_uring/net: restore msg_control on sendzc retry
io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure
|
|
Pull ceph fixes from Ilya Dryomov:
"Two CephFS fixes marked for stable and a MAINTAINERS update"
* tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-client:
MAINTAINERS: remove myself as a Reviewer for Ceph
ceph: switch to use cap_delay_lock for the unlink delay list
ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE
|
|
Commit d96c36004e31 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig
entry") removed a hidden tab because it apparently showed breakage in
some third-party kernel config parsing tool.
It wasn't clear what tool it was, but let's make sure it gets fixed.
Because if you can't parse tabs as whitespace, you should not be parsing
the kernel Kconfig files.
In fact, let's make such breakage more obvious than some esoteric ftrace
record size option. If you can't parse tabs, you can't have page sizes.
Yes, tab-vs-space confusion is sadly a traditional Unix thing, and
'make' is famous for being broken in this regard. But no, that does not
mean that it's ok.
I'd add more random tabs to our Kconfig files, but I don't want to make
things uglier than necessary. But it *might* bbe necessary if it turns
out we see more of this kind of silly tooling.
Fixes: d96c36004e31 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry")
Link: https://lore.kernel.org/lkml/CAHk-=wj-hLLN_t_m5OL4dXLaxvXKy_axuoJYXif7iczbfgAevQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the buffer_percent accounting as it is dependent on three
variables:
1) pages_read - number of subbuffers read
2) pages_lost - number of subbuffers lost due to overwrite
3) pages_touched - number of pages that a writer entered
These three counters only increment, and to know how many active
pages there are on the buffer at any given time, the pages_read and
pages_lost are subtracted from pages_touched.
But the pages touched was incremented whenever any writer went to the
next subbuffer even if it wasn't the only one, so it was incremented
more than it should be causing the counter for how many subbuffers
currently have content incorrect, which caused the buffer_percent
that holds waiters until the ring buffer is filled to a given
percentage to wake up early.
- Fix warning of unused functions when PERF_EVENTS is not configured in
- Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE
- Fix to some kerneldoc function comments in eventfs code.
* tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Only update pages_touched when a new page is touched
tracing: hide unused ftrace_event_id_fops
tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry
eventfs: Fix kernel-doc comments to functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Fix for syscall_get_nr() to make it work even if tracing is disabled"
* tag 'mips-fixes_6.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: scall: Save thread_info.syscall unconditionally on entry
|
|
Pull drm fixes from Dave Airlie:
"Looks like everyone woke up after holidays, this weeks pull has a
bunch of stuff all over, 2 weeks worth of amdgpu is a lot of it, then
i915/xe have a few, a bunch of msm fixes, then some scattered driver
fixes.
I expect things will settle down for rc5.
client:
- Protect connector modes with mode_config mutex
ast:
- Fix soft lockup
host1x:
- Do not setup DMA for virtual addresses
ivpu:
- Fix deadlock in context_xa
- PCI fixes
- Fixes to error handling
nouveau:
- gsp: Fix OOB access
- Fix casting
panfrost:
- Fix error path in MMU code
qxl:
- Revert "drm/qxl: simplify qxl_fence_wait"
vmwgfx:
- Enable DMA for SEV mappings
i915:
- Couple CDCLK programming fixes
- HDCP related fix
- 4 Bigjoiner related fixes
- Fix for a circular locking around GuC on reset+wedged case
xe:
- Fix double display mutex initializations
- Fix u32 -> u64 implicit conversions
- Fix RING_CONTEXT_CONTROL not marked as masked
msm:
- DP refcount leak fix on disconnect
- Add missing newlines to prints in msm_fb and msm_kms
- fix dpu debugfs entry permissions
- Fix the interface table for the catalog of X1E80100
- fix irq message printing
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption
amdgpu:
- GPU reset fixes
- Fix some confusing logging
- UMSCH fix
- Aborted suspend fix
- DCN 3.5 fixes
- S4 fix
- MES logging fixes
- SMU 14 fixes
- SDMA 4.4.2 fix
- KASAN fix
- SMU 13.0.10 fix
- VCN partition fix
- GFX11 fixes
- DWB fixes
- Plane handling fix
- FAMS fix
- DCN 3.1.6 fix
- VSC SDP fixes
- OLED panel fix
- GFX 11.5 fix
amdkfd:
- GPU reset fixes
- fix ioctl integer overflow"
* tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel: (65 commits)
amdkfd: use calloc instead of kzalloc to avoid integer overflow
drm/xe: Label RING_CONTEXT_CONTROL as masked
drm/xe/xe_migrate: Cast to output precision before multiplying operands
drm/xe/hwmon: Cast result to output precision on left shift of operand
drm/xe/display: Fix double mutex initialization
drm/amdgpu: differentiate external rev id for gfx 11.5.0
drm/amd/display: Adjust dprefclk by down spread percentage.
drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST
drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4
drm/amd/display: fix disable otg wa logic in DCN316
drm/amd/display: Do not recursively call manual trigger programming
drm/amd/display: always reset ODM mode in context when adding first plane
drm/amdgpu: fix incorrect number of active RBs for gfx11
drm/amd/display: Return max resolution supported by DWB
amd/amdkfd: sync all devices to wait all processes being evicted
drm/amdgpu: clear set_q_mode_offs when VM changed
drm/amdgpu: Fix VCN allocation in CPX partition
drm/amd/pm: fix the high voltage issue after unload
drm/amd/display: Skip on writeback when it's not applicable
drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2
...
|
|
While monitoring the throttle time of IO from iocost, it's found that
such time is always zero after the io_schedule() from ioc_rqos_throttle,
for example, with the following debug patch:
+ printk("%s-%d: %s enter %llu\n", current->comm, current->pid, __func__, blk_time_get_ns());
while (true) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (wait.committed)
break;
io_schedule();
}
+ printk("%s-%d: %s exit %llu\n", current->comm, current->pid, __func__, blk_time_get_ns());
It can be observerd that blk_time_get_ns() always return the same time:
[ 1068.096579] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.272587] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.274389] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.472690] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.474485] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.672656] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.674451] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.872655] fio-1268: ioc_rqos_throttle exit 1067901962288
And I think the root cause is that 'PF_BLOCK_TS' is always cleared
by blk_flush_plug() before scheduel(), hence blk_plug_invalidate_ts()
will never be called:
blk_time_get_ns
plug->cur_ktime = ktime_get_ns();
current->flags |= PF_BLOCK_TS;
io_schedule:
io_schedule_prepare
blk_flush_plug
__blk_flush_plug
/* the flag is cleared, while time is not */
current->flags &= ~PF_BLOCK_TS;
schedule
sched_update_worker
/* the flag is not set, hence plug->cur_ktime is not cleared */
if (tsk->flags & PF_BLOCK_TS)
blk_plug_invalidate_ts()
blk_time_get_ns
/* got the time stashed before schedule */
return plug->cur_ktime;
Fix the problem by clearing cached time in __blk_flush_plug().
Fixes: 06b23f92af87 ("block: update cached timestamp post schedule/preemption")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240411032349.3051233-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use consistent log severity (pr_warn) to log all messages in SNP
enable path.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240410101643.32309-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed
devices") adds all devices probed by the iommu driver in a rbtree
indexed by the source ID of each device. It assumes that each device
has a unique source ID. This assumption is incorrect and the VT-d
spec doesn't state this requirement either.
The reason for using a rbtree to track devices is to look up the device
with PCI bus and devfunc in the paths of handling ATS invalidation time
out error and the PRI I/O page faults. Both are PCI ATS feature related.
Only track the devices that have PCI ATS capabilities in the rbtree to
avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some
platforms below kernel splat will be displayed and the iommu probe results
in failure.
WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90
Call Trace:
<TASK>
? __warn+0x7e/0x180
? intel_iommu_probe_device+0x319/0xd90
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? intel_iommu_probe_device+0x319/0xd90
? debug_mutex_init+0x37/0x50
__iommu_probe_device+0xf2/0x4f0
iommu_probe_device+0x22/0x70
iommu_bus_notifier+0x1e/0x40
notifier_call_chain+0x46/0x150
blocking_notifier_call_chain+0x42/0x60
bus_notify+0x2f/0x50
device_add+0x5ed/0x7e0
platform_device_add+0xf5/0x240
mfd_add_devices+0x3f9/0x500
? preempt_count_add+0x4c/0xa0
? up_write+0xa2/0x1b0
? __debugfs_create_file+0xe3/0x150
intel_lpss_probe+0x49f/0x5b0
? pci_conf1_write+0xa3/0xf0
intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci]
pci_device_probe+0x95/0x120
really_probe+0xd9/0x370
? __pfx___driver_attach+0x10/0x10
__driver_probe_device+0x73/0x150
driver_probe_device+0x19/0xa0
__driver_attach+0xb6/0x180
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x77/0xd0
bus_add_driver+0x114/0x210
driver_register+0x5b/0x110
? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci]
do_one_initcall+0x57/0x2b0
? kmalloc_trace+0x21e/0x280
? do_init_module+0x1e/0x210
do_init_module+0x5f/0x210
load_module+0x1d37/0x1fc0
? init_module_from_file+0x86/0xd0
init_module_from_file+0x86/0xd0
idempotent_init_module+0x17c/0x230
__x64_sys_finit_module+0x56/0xb0
do_syscall_64+0x6e/0x140
entry_SYSCALL_64_after_hwframe+0x71/0x79
Fixes: 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10689
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240407011429.136282-1-baolu.lu@linux.intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The page request queue is per IOMMU, its allocation should be made
NUMA-aware for performance reasons.
Fixes: a222a7f0bb6c ("iommu/vt-d: Implement page request handling")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240403214007.985600-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The commit "iommu/vt-d: Add IOMMU perfmon support" introduce IOMMU
PMU feature, but use the wrong config when set pasid filter.
Fixes: 7232ab8b89e9 ("iommu/vt-d: Add IOMMU perfmon support")
Signed-off-by: Xuchun Shang <xuchun.shang@linux.alibaba.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240401060753.3321318-1-xuchun.shang@linux.alibaba.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410164109.233308-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
DTE[Mode]=0 is not supported when SNP is enabled in the host. That means
to support SNP, IOMMU must be configured with V1 page table (See IOMMU
spec [1] for the details). If user passes kernel command line to configure
IOMMU domains with v2 page table (amd_iommu=pgtbl_v2) then disable SNP
as the user asked by not forcing the page table to v1.
[1] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240410085702.31869-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
LOCKDEP detector reported below warning:
----------------------------------------
[ 23.796949] ========================================================
[ 23.796950] WARNING: possible irq lock inversion dependency detected
[ 23.796952] 6.8.0fix+ #811 Not tainted
[ 23.796954] --------------------------------------------------------
[ 23.796954] kworker/0:1/8 just changed the state of lock:
[ 23.796956] ff365325e084a9b8 (&domain->lock){..-.}-{3:3}, at: amd_iommu_flush_iotlb_all+0x1f/0x50
[ 23.796969] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 23.796970] (pd_bitmap_lock){+.+.}-{3:3}
[ 23.796972]
and interrupts could create inverse lock ordering between them.
[ 23.796973]
other info that might help us debug this:
[ 23.796974] Chain exists of:
&domain->lock --> &dev_data->lock --> pd_bitmap_lock
[ 23.796980] Possible interrupt unsafe locking scenario:
[ 23.796981] CPU0 CPU1
[ 23.796982] ---- ----
[ 23.796983] lock(pd_bitmap_lock);
[ 23.796985] local_irq_disable();
[ 23.796985] lock(&domain->lock);
[ 23.796988] lock(&dev_data->lock);
[ 23.796990] <Interrupt>
[ 23.796991] lock(&domain->lock);
Fix this issue by disabling interrupt when acquiring pd_bitmap_lock.
Note that this is temporary fix. We have a plan to replace custom bitmap
allocator with IDA allocator.
Fixes: 87a6f1f22c97 ("iommu/amd: Introduce per-device domain ID to fix potential TLB aliasing issue")
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240404102717.6705-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This uses calloc instead of doing the multiplication which might
overflow.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.9
Display:
- Fixes for PM refcount leak when DP goes to disconnected state and
also when link training fails. This is also one of the issues found
with the pm runtime series
- Add missing newlines to prints in msm_fb and msm_kms
- Change permissions of some dpu debugfs entries which write to const
data from catalog to read-only to avoid protection faults
- Fix the interface table for the catalog of X1E80100. This is an
important fix to bringup DP for X1E80100.
- Logging fix to print the callback symbol in the invalid IRQ message
case rather than printing when its known to be NULL.
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change
GPU:
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvFwRUcHGWva7oDeydq1PTiZMduuykCD2MWaFrT4iMGZA@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Fix index of Clear Event Record handles in cxl_clear_event_record()
- Fix use before init of map->reg_type in cxl_decode_regblock()
- Fix initialization of mbox_cmd.size_out in cxl_mem_get_records_log()
- Fix CXL path access_coordinate computation:
- Remove unneded check of iter in loop
- Fix of retrieving of access_coordinate in PCI topology walk
- Fix of incorrect region access_coordinate data calculation
- Consolidate of access_coordinates attached to downstream port
context
- Add check to validate access_coordinate validity to prevent
incorrect data being exposed via sysfs
* tag 'cxl-fixes-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Add checks to access_coordinate calculation to fail missing data
cxl: Consolidate dport access_coordinate ->hb_coord and ->sw_coord into ->coord
cxl: Fix incorrect region perf data calculation
cxl: Fix retrieving of access_coordinates in PCIe path
cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates()
cxl/core: Fix initialization of mbox_cmd.size_out in get event
cxl/core/regs: Fix usage of map->reg_type in cxl_decode_regblock() before assigned
cxl/mem: Fix for the index of Clear Event Record Handle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Some cosmetic changes (Erni Sri Satya Vennela, Li Zhijian)
- Introduce hv_numa_node_to_pxm_info() (Nuno Das Neves)
- Fix KVP daemon to handle IPv4 and IPv6 combination for keyfile format
(Shradha Gupta)
- Avoid freeing decrypted memory in a confidential VM (Rick Edgecombe
and Michael Kelley)
* tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted
uio_hv_generic: Don't free decrypted memory
hv_netvsc: Don't free decrypted memory
Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl
Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails
hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile format
hv: vmbus: Convert sprintf() family to sysfs_emit() family
mshyperv: Introduce hv_numa_node_to_pxm_info()
x86/hyperv: Cosmetic changes for hv_apic.c
|
|
The "buffer_percent" logic that is used by the ring buffer splice code to
only wake up the tasks when there's no data after the buffer is filled to
the percentage of the "buffer_percent" file is dependent on three
variables that determine the amount of data that is in the ring buffer:
1) pages_read - incremented whenever a new sub-buffer is consumed
2) pages_lost - incremented every time a writer overwrites a sub-buffer
3) pages_touched - incremented when a write goes to a new sub-buffer
The percentage is the calculation of:
(pages_touched - (pages_lost + pages_read)) / nr_pages
Basically, the amount of data is the total number of sub-bufs that have been
touched, minus the number of sub-bufs lost and sub-bufs consumed. This is
divided by the total count to give the buffer percentage. When the
percentage is greater than the value in the "buffer_percent" file, it
wakes up splice readers waiting for that amount.
It was observed that over time, the amount read from the splice was
constantly decreasing the longer the trace was running. That is, if one
asked for 60%, it would read over 60% when it first starts tracing, but
then it would be woken up at under 60% and would slowly decrease the
amount of data read after being woken up, where the amount becomes much
less than the buffer percent.
This was due to an accounting of the pages_touched incrementation. This
value is incremented whenever a writer transfers to a new sub-buffer. But
the place where it was incremented was incorrect. If a writer overflowed
the current sub-buffer it would go to the next one. If it gets preempted
by an interrupt at that time, and the interrupt performs a trace, it too
will end up going to the next sub-buffer. But only one should increment
the counter. Unfortunately, that was not the case.
Change the cmpxchg() that does the real switch of the tail-page into a
try_cmpxchg(), and on success, perform the increment of pages_touched. This
will only increment the counter once for when the writer moves to a new
sub-buffer, and not when there's a race and is incremented for when a
writer and its preempting writer both move to the same new sub-buffer.
Link: https://lore.kernel.org/linux-trace-kernel/20240409151309.0d0e5056@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 2c2b0a78b3739 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When CONFIG_PERF_EVENTS, a 'make W=1' build produces a warning about the
unused ftrace_event_id_fops variable:
kernel/trace/trace_events.c:2155:37: error: 'ftrace_event_id_fops' defined but not used [-Werror=unused-const-variable=]
2155 | static const struct file_operations ftrace_event_id_fops = {
Hide this in the same #ifdef as the reference to it.
Link: https://lore.kernel.org/linux-trace-kernel/20240403080702.3509288-7-arnd@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ajay Kaher <akaher@vmware.com>
Cc: Jinjie Ruan <ruanjinjie@huawei.com>
Cc: Clément Léger <cleger@rivosinc.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com>
Fixes: 620a30e97feb ("tracing: Don't pass file_operations array to event_create_dir()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix FTRACE_RECORD_RECURSION_SIZE entry, replace tab with
a space character. It helps Kconfig parsers to read file
without error.
Link: https://lore.kernel.org/linux-trace-kernel/20240322121801.1803948-1-ppandit@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 773c16705058 ("ftrace: Add recording of functions that caused recursion")
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This commit fix kernel-doc style comments with complete parameter
descriptions for the lookup_file(),lookup_dir_entry() and
lookup_file_dentry().
Link: https://lore.kernel.org/linux-trace-kernel/20240322062604.28862-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
It has been a couple of years since I stepped down as CephFS maintainer.
I'm not involved in any meaningful way with the project these days, so
while I'm happy to help review the occasional patch, I don't need to be
cc'ed on all of them.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The same list item will be used in both cap_delay_list and
cap_unlink_delay_list, so it's buggy to use two different locks
to protect them.
Cc: stable@vger.kernel.org
Fixes: dbc347ef7f0c ("ceph: add ceph_cap_unlink_work to fire check_caps() immediately")
Link: https://lists.ceph.io/hyperkitty/list/ceph-users@ceph.io/thread/AODC76VXRAMXKLFDCTK4TKFDDPWUSCN5
Reported-by: Marc Ruhmann <ruhmann@luis.uni-hannover.de>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Marc Ruhmann <ruhmann@luis.uni-hannover.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix double display mutex initializations
- Fix u32 -> u64 implicit conversions
- Fix RING_CONTEXT_CONTROL not marked as masked
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ewvvtgcb2gonxvccws6nt6fqswoyfp4g43t5ex24vpqwtrxdzm@hgjoz5uirmxx
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
ast:
- Fix soft lockup
client:
- Protect connector modes with mode_config mutex
host1x:
- Do not setup DMA for virtual addresses
ivpu:
- Fix deadlock in context_xa
- PCI fixes
- Fixes to error handling
nouveau:
- gsp: Fix OOB access
- Fix casting
panfrost:
- Fix error path in MMU code
qxl:
- Revert "drm/qxl: simplify qxl_fence_wait"
vmwgfx:
- Enable DMA for SEV mappings
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411073403.GA9895@localhost.localdomain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the handling of dependencies between devices in the ACPI
device enumeration code and address a _UID matching regression from
the 6.8 development cycle.
Specifics:
- Modify the ACPI device enumeration code to avoid counting
dependencies that have been met already as unmet (Hans de Goede)
- Make _UID matching take the integer value of 0 into account as
appropriate (Raag Jadav)"
* tag 'acpi-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: allow _UID matching for integer zero
ACPI: scan: Do not increase dep_unmet for already met dependencies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix the suspend-to-idle core code to guarantee that timers queued on
CPUs other than the one that has first left the idle state, which
should expire directly after resume, will be handled (Anna-Maria
Behnsen)"
* tag 'pm-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: s2idle: Make sure CPUs will wakeup directly on resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Current release - new code bugs:
- netfilter: complete validation of user input
- mlx5: disallow SRIOV switchdev mode when in multi-PF netdev
Previous releases - regressions:
- core: fix u64_stats_init() for lockdep when used repeatedly in one
file
- ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr
- bluetooth: fix memory leak in hci_req_sync_complete()
- batman-adv: avoid infinite loop trying to resize local TT
- drv: geneve: fix header validation in geneve[6]_xmit_skb
- drv: bnxt_en: fix possible memory leak in
bnxt_rdma_aux_device_init()
- drv: mlx5: offset comp irq index in name by one
- drv: ena: avoid double-free clearing stale tx_info->xdpf value
- drv: pds_core: fix pdsc_check_pci_health deadlock
Previous releases - always broken:
- xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING
- bluetooth: fix setsockopt not validating user input
- af_unix: clear stale u->oob_skb.
- nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies
- drv: virtio_net: fix guest hangup on invalid RSS update
- drv: mlx5e: Fix mlx5e_priv_init() cleanup flow
- dsa: mt7530: trap link-local frames regardless of ST Port State"
* tag 'net-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: ena: Set tx_info->xdpf value to NULL
net: ena: Fix incorrect descriptor free behavior
net: ena: Wrong missing IO completions check order
net: ena: Fix potential sign extension issue
af_unix: Fix garbage collector racing against connect()
net: dsa: mt7530: trap link-local frames regardless of ST Port State
Revert "s390/ism: fix receive message buffer allocation"
net: sparx5: fix wrong config being used when reconfiguring PCS
net/mlx5: fix possible stack overflows
net/mlx5: Disallow SRIOV switchdev mode when in multi-PF netdev
net/mlx5e: RSS, Block XOR hash with over 128 channels
net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmit
net/mlx5e: HTB, Fix inconsistencies with QoS SQs number
net/mlx5e: Fix mlx5e_priv_init() cleanup flow
net/mlx5e: RSS, Block changing channels number when RXFH is configured
net/mlx5: Correctly compare pkt reformat ids
net/mlx5: Properly link new fs rules into the tree
net/mlx5: offset comp irq index in name by one
net/mlx5: Register devlink first under devlink lock
net/mlx5: E-switch, store eswitch pointer before registering devlink_param
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The most important fix is the sg one because the regression it fixes
(spurious warning and use after final put) is already backported to
stable.
The next biggest impact is the target fix for wrong credentials used
to load a module because it's affecting new kernels installed on
selinux based distributions.
The other three fixes are an obvious off by one and SATA protocol
issues"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix off by one in qla_edif_app_getstats()
scsi: hisi_sas: Modify the deadline for ata_wait_after_reset()
scsi: hisi_sas: Handle the NCQ error returned by D2H frame
scsi: target: Fix SELinux error when systemd-modules loads the target module
scsi: sg: Avoid race in error handling & drop bogus warn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- make {virt, phys, page, pfn} translation work with KFENCE for
LoongArch (otherwise NVMe and virtio-blk cannot work with KFENCE
enabled)
- update dts files for Loongson-2K series to make devices work
correctly
- fix a build error
* tag 'loongarch-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Include linux/sizes.h in addrspace.h to prevent build errors
LoongArch: Update dts for Loongson-2K2000 to support GMAC/GNET
LoongArch: Update dts for Loongson-2K2000 to support PCI-MSI
LoongArch: Update dts for Loongson-2K2000 to support ISA/LPC
LoongArch: Update dts for Loongson-2K1000 to support ISA/LPC
LoongArch: Make virt_addr_valid()/__virt_addr_valid() work with KFENCE
LoongArch: Make {virt, phys, page, pfn} translation work with KFENCE
mm: Move lowmem_page_address() a little later
|
|
Pull more bcachefs fixes from Kent Overstreet:
"Notable user impacting bugs
- On multi device filesystems, recovery was looping in
btree_trans_too_many_iters(). This checks if a transaction has
touched too many btree paths (because of iteration over many keys),
and isuses a restart to drop unneeded paths.
But it's now possible for some paths to exceed the previous limit
without iteration in the interior btree update path, since the
transaction commit will do alloc updates for every old and new
btree node, and during journal replay we don't use the btree write
buffer for locking reasons and thus those updates use btree paths
when they wouldn't normally.
- Fix a corner case in rebalance when moving extents on a
durability=0 device. This wouldn't be hit when a device was
formatted with durability=0 since in that case we'll only use it as
a write through cache (only cached extents will live on it), but
durability can now be changed on an existing device.
- bch2_get_acl() could rarely forget to handle a transaction restart;
this manifested as the occasional missing acl that came back after
dropping caches.
- Fix a major performance regression on high iops multithreaded write
workloads (only since 6.9-rc1); a previous fix for a deadlock in
the interior btree update path to check the journal watermark
introduced a dependency on the state of btree write buffer flushing
that we didn't want.
- Assorted other repair paths and recovery fixes"
* tag 'bcachefs-2024-04-10' of https://evilpiepirate.org/git/bcachefs: (25 commits)
bcachefs: Fix __bch2_btree_and_journal_iter_init_node_iter()
bcachefs: Kill read lock dropping in bch2_btree_node_lock_write_nofail()
bcachefs: Fix a race in btree_update_nodes_written()
bcachefs: btree_node_scan: Respect member.data_allowed
bcachefs: Don't scan for btree nodes when we can reconstruct
bcachefs: Fix check_topology() when using node scan
bcachefs: fix eytzinger0_find_gt()
bcachefs: fix bch2_get_acl() transaction restart handling
bcachefs: fix the count of nr_freed_pcpu after changing bc->freed_nonpcpu list
bcachefs: Fix gap buffer bug in bch2_journal_key_insert_take()
bcachefs: Rename struct field swap to prevent macro naming collision
MAINTAINERS: Add entry for bcachefs documentation
Documentation: filesystems: Add bcachefs toctree
bcachefs: JOURNAL_SPACE_LOW
bcachefs: Disable errors=panic for BCH_IOCTL_FSCK_OFFLINE
bcachefs: Fix BCH_IOCTL_FSCK_OFFLINE for encrypted filesystems
bcachefs: fix rand_delete unit test
bcachefs: fix ! vs ~ typo in __clear_bit_le64()
bcachefs: Fix rebalance from durability=0 device
bcachefs: Print shutdown journal sequence number
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform fix from Tzung-Bi Shih:
"Fix a NULL pointer dereference"
* tag 'tag-chrome-platform-fixes-for-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_uart: properly fix race condition
|
|
* acpi-bus:
ACPI: bus: allow _UID matching for integer zero
|
|
The page has been marked clean before writepage is called. If we don't
redirty it before postponing the write, it might never get written.
Cc: stable@vger.kernel.org
Fixes: 503d4fa6ee28 ("ceph: remove reliance on bdi congestion")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
RING_CONTEXT_CONTROL is a masked register.
v2: Also clean up setting register value (Lucas)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404161256.3852502-1-ashutosh.dixit@intel.com
(cherry picked from commit dc30c6e7149baaae4288c742de95212b31f07438)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Addressing potential overflow in result of multiplication of two lower
precision (u32) operands before widening it to higher precision
(u64).
-v2
Fix commit message and description. (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401175300.3823653-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 34820967ae7b45411f8f4f737c2d63b0c608e0d7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Address potential overflow in result of left shift of a
lower precision (u32) operand before assignment to higher
precision (u64) variable.
v2:
- Update commit message. (Himal)
Fixes: 4446fcf220ce ("drm/xe/hwmon: Expose power1_max_interval")
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405130127.1392426-5-karthik.poosa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 883232b47b81108b0252197c747f396ecd51455a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
All of these mutexes are already initialized by the display side since
commit 3fef3e6ff86a ("drm/i915: move display mutex inits to display
code"), so the xe shouldn´t initialize them.
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405200711.2041428-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 117de185edf2c5767f03575219bf7a43b161ff0d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
David Arinzon says:
====================
ENA driver bug fixes
From: David Arinzon <darinzon@amazon.com>
This patchset contains multiple bug fixes for the
ENA driver.
====================
Link: https://lore.kernel.org/r/20240410091358.16289-1-darinzon@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The patch mentioned in the `Fixes` tag removed the explicit assignment
of tx_info->xdpf to NULL with the justification that there's no need
to set tx_info->xdpf to NULL and tx_info->num_of_bufs to 0 in case
of a mapping error. Both values won't be used once the mapping function
returns an error, and their values would be overridden by the next
transmitted packet.
While both values do indeed get overridden in the next transmission
call, the value of tx_info->xdpf is also used to check whether a TX
descriptor's transmission has been completed (i.e. a completion for it
was polled).
An example scenario:
1. Mapping failed, tx_info->xdpf wasn't set to NULL
2. A VF reset occurred leading to IO resource destruction and
a call to ena_free_tx_bufs() function
3. Although the descriptor whose mapping failed was freed by the
transmission function, it still passes the check
if (!tx_info->skb)
(skb and xdp_frame are in a union)
4. The xdp_frame associated with the descriptor is freed twice
This patch returns the assignment of NULL to tx_info->xdpf to make the
cleaning function knows that the descriptor is already freed.
Fixes: 504fd6a5390c ("net: ena: fix DMA mapping function issues in XDP")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ENA has two types of TX queues:
- queues which only process TX packets arriving from the network stack
- queues which only process TX packets forwarded to it by XDP_REDIRECT
or XDP_TX instructions
The ena_free_tx_bufs() cycles through all descriptors in a TX queue
and unmaps + frees every descriptor that hasn't been acknowledged yet
by the device (uncompleted TX transactions).
The function assumes that the processed TX queue is necessarily from
the first category listed above and ends up using napi_consume_skb()
for descriptors belonging to an XDP specific queue.
This patch solves a bug in which, in case of a VF reset, the
descriptors aren't freed correctly, leading to crashes.
Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Missing IO completions check is called every second (HZ jiffies).
This commit fixes several issues with this check:
1. Duplicate queues check:
Max of 4 queues are scanned on each check due to monitor budget.
Once reaching the budget, this check exits under the assumption that
the next check will continue to scan the remainder of the queues,
but in practice, next check will first scan the last already scanned
queue which is not necessary and may cause the full queue scan to
last a couple of seconds longer.
The fix is to start every check with the next queue to scan.
For example, on 8 IO queues:
Bug: [0,1,2,3], [3,4,5,6], [6,7]
Fix: [0,1,2,3], [4,5,6,7]
2. Unbalanced queues check:
In case the number of active IO queues is not a multiple of budget,
there will be checks which don't utilize the full budget
because the full scan exits when reaching the last queue id.
The fix is to run every TX completion check with exact queue budget
regardless of the queue id.
For example, on 7 IO queues:
Bug: [0,1,2,3], [4,5,6], [0,1,2,3]
Fix: [0,1,2,3], [4,5,6,0], [1,2,3,4]
The budget may be lowered in case the number of IO queues is less
than the budget (4) to make sure there are no duplicate queues on
the same check.
For example, on 3 IO queues:
Bug: [0,1,2,0], [1,2,0,1]
Fix: [0,1,2], [0,1,2]
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Amit Bernstein <amitbern@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Small unsigned types are promoted to larger signed types in
the case of multiplication, the result of which may overflow.
In case the result of such a multiplication has its MSB
turned on, it will be sign extended with '1's.
This changes the multiplication result.
Code example of the phenomenon:
-------------------------------
u16 x, y;
size_t z1, z2;
x = y = 0xffff;
printk("x=%x y=%x\n",x,y);
z1 = x*y;
z2 = (size_t)x*y;
printk("z1=%lx z2=%lx\n", z1, z2);
Output:
-------
x=ffff y=ffff
z1=fffffffffffe0001 z2=fffe0001
The expected result of ffff*ffff is fffe0001, and without the
explicit casting to avoid the unwanted sign extension we got
fffffffffffe0001.
This commit adds an explicit casting to avoid the sign extension
issue.
Fixes: 689b2bdaaa14 ("net: ena: add functions for handling Low Latency Queues in ena_com")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- L2CAP: Don't double set the HCI_CONN_MGMT_CONNECTED bit
- Fix memory leak in hci_req_sync_complete
- hci_sync: Fix using the same interval and window for Coded PHY
- Fix not validating setsockopt user input
* tag 'for-net-2024-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: l2cap: Don't double set the HCI_CONN_MGMT_CONNECTED bit
Bluetooth: hci_sock: Fix not validating setsockopt user input
Bluetooth: ISO: Fix not validating setsockopt user input
Bluetooth: L2CAP: Fix not validating setsockopt user input
Bluetooth: RFCOMM: Fix not validating setsockopt user input
Bluetooth: SCO: Fix not validating setsockopt user input
Bluetooth: Fix memory leak in hci_req_sync_complete()
Bluetooth: hci_sync: Fix using the same interval and window for Coded PHY
Bluetooth: ISO: Don't reject BT_ISO_QOS if parameters are unset
====================
Link: https://lore.kernel.org/r/20240410191610.4156653-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Garbage collector does not take into account the risk of embryo getting
enqueued during the garbage collection. If such embryo has a peer that
carries SCM_RIGHTS, two consecutive passes of scan_children() may see a
different set of children. Leading to an incorrectly elevated inflight
count, and then a dangling pointer within the gc_inflight_list.
sockets are AF_UNIX/SOCK_STREAM
S is an unconnected socket
L is a listening in-flight socket bound to addr, not in fdtable
V's fd will be passed via sendmsg(), gets inflight count bumped
connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc()
---------------- ------------------------- -----------
NS = unix_create1()
skb1 = sock_wmalloc(NS)
L = unix_find_other(addr)
unix_state_lock(L)
unix_peer(S) = NS
// V count=1 inflight=0
NS = unix_peer(S)
skb2 = sock_alloc()
skb_queue_tail(NS, skb2[V])
// V became in-flight
// V count=2 inflight=1
close(V)
// V count=1 inflight=1
// GC candidate condition met
for u in gc_inflight_list:
if (total_refs == inflight_refs)
add u to gc_candidates
// gc_candidates={L, V}
for u in gc_candidates:
scan_children(u, dec_inflight)
// embryo (skb1) was not
// reachable from L yet, so V's
// inflight remains unchanged
__skb_queue_tail(L, skb1)
unix_state_unlock(L)
for u in gc_candidates:
if (u.inflight)
scan_children(u, inc_inflight_move_tail)
// V count=1 inflight=2 (!)
If there is a GC-candidate listening socket, lock/unlock its state. This
makes GC wait until the end of any ongoing connect() to that socket. After
flipping the lock, a possibly SCM-laden embryo is already enqueued. And if
there is another embryo coming, it can not possibly carry SCM_RIGHTS. At
this point, unix_inflight() can not happen because unix_gc_lock is already
taken. Inflight graph remains unaffected.
Fixes: 1fd05ba5a2f2 ("[AF_UNIX]: Rewrite garbage collector, fixes race.")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240409201047.1032217-1-mhal@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer
(DLL) of the Open Systems Interconnection basic reference model (OSI/RM)
are described; the medium access control (MAC) and logical link control
(LLC) sublayers. The MAC sublayer is the one facing the physical layer.
In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A
Bridge component comprises a MAC Relay Entity for interconnecting the Ports
of the Bridge, at least two Ports, and higher layer entities with at least
a Spanning Tree Protocol Entity included.
Each Bridge Port also functions as an end station and shall provide the MAC
Service to an LLC Entity. Each instance of the MAC Service is provided to a
distinct LLC Entity that supports protocol identification, multiplexing,
and demultiplexing, for protocol data unit (PDU) transmission and reception
by one or more higher layer entities.
It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC
Entity associated with each Bridge Port is modeled as being directly
connected to the attached Local Area Network (LAN).
On the switch with CPU port architecture, CPU port functions as Management
Port, and the Management Port functionality is provided by software which
functions as an end station. Software is connected to an IEEE 802 LAN that
is wholly contained within the system that incorporates the Bridge.
Software provides access to the LLC Entity associated with each Bridge Port
by the value of the source port field on the special tag on the frame
received by software.
We call frames that carry control information to determine the active
topology and current extent of each Virtual Local Area Network (VLAN),
i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN
Registration Protocol Data Units (MVRPDUs), and frames from other link
constrained protocols, such as Extensible Authentication Protocol over LAN
(EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They
are not forwarded by a Bridge. Permanently configured entries in the
filtering database (FDB) ensure that such frames are discarded by the
Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in
detail:
Each of the reserved MAC addresses specified in Table 8-1
(01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be
permanently configured in the FDB in C-VLAN components and ERs.
Each of the reserved MAC addresses specified in Table 8-2
(01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently
configured in the FDB in S-VLAN components.
Each of the reserved MAC addresses specified in Table 8-3
(01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB
in TPMR components.
The FDB entries for reserved MAC addresses shall specify filtering for all
Bridge Ports and all VIDs. Management shall not provide the capability to
modify or remove entries for reserved MAC addresses.
The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of
propagation of PDUs within a Bridged Network, as follows:
The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that
no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN)
component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward.
PDUs transmitted using this destination address, or any other addresses
that appear in Table 8-1, Table 8-2, and Table 8-3
(01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can
therefore travel no further than those stations that can be reached via a
single individual LAN from the originating station.
The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an
address that no conformant S-VLAN component, C-VLAN component, or MAC
Bridge can forward; however, this address is relayed by a TPMR component.
PDUs using this destination address, or any of the other addresses that
appear in both Table 8-1 and Table 8-2 but not in Table 8-3
(01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed
by any TPMRs but will propagate no further than the nearest S-VLAN
component, C-VLAN component, or MAC Bridge.
The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an
address that no conformant C-VLAN component, MAC Bridge can forward;
however, it is relayed by TPMR components and S-VLAN components. PDUs
using this destination address, or any of the other addresses that appear
in Table 8-1 but not in either Table 8-2 or Table 8-3
(01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and
S-VLAN components but will propagate no further than the nearest C-VLAN
component or MAC Bridge.
Because the LLC Entity associated with each Bridge Port is provided via CPU
port, we must not filter these frames but forward them to CPU port.
In a Bridge, the transmission Port is majorly decided by ingress and egress
rules, FDB, and spanning tree Port State functions of the Forwarding
Process. For link-local frames, only CPU port should be designated as
destination port in the FDB, and the other functions of the Forwarding
Process must not interfere with the decision of the transmission Port. We
call this process trapping frames to CPU port.
Therefore, on the switch with CPU port architecture, link-local frames must
be trapped to CPU port, and certain link-local frames received by a Port of
a Bridge comprising a TPMR component or an S-VLAN component must be
excluded from it.
A Bridge of the switch with CPU port architecture cannot comprise a
Two-Port MAC Relay (TPMR) component as a TPMR component supports only a
subset of the functionality of a MAC Bridge. A Bridge comprising two Ports
(Management Port doesn't count) of this architecture will either function
as a standard MAC Bridge or a standard VLAN Bridge.
Therefore, a Bridge of this architecture can only comprise S-VLAN
components, C-VLAN components, or MAC Bridge components. Since there's no
TPMR component, we don't need to relay PDUs using the destination addresses
specified on the Nearest non-TPMR section, and the proportion of the
Nearest Customer Bridge section where they must be relayed by TPMR
components.
One option to trap link-local frames to CPU port is to add static FDB
entries with CPU port designated as destination port. However, because that
Independent VLAN Learning (IVL) is being used on every VID, each entry only
applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC
Bridge component or a C-VLAN component, there would have to be 16 times
4096 entries. This switch intellectual property can only hold a maximum of
2048 entries. Using this option, there also isn't a mechanism to prevent
link-local frames from being discarded when the spanning tree Port State of
the reception Port is discarding.
The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4
registers. Whilst this applies to every VID, it doesn't contain all of the
reserved MAC addresses without affecting the remaining Standard Group MAC
Addresses. The REV_UN frame tag utilised using the RGAC4 register covers
the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination
addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF
destination addresses which may be relayed by MAC Bridges or VLAN Bridges.
The latter option provides better but not complete conformance.
This switch intellectual property also does not provide a mechanism to trap
link-local frames with specific destination addresses to CPU port by
Bridge, to conform to the filtering rules for the distinct Bridge
components.
Therefore, regardless of the type of the Bridge component, link-local
frames with these destination addresses will be trapped to CPU port:
01-80-C2-00-00-[00,01,02,03,0E]
In a Bridge comprising a MAC Bridge component or a C-VLAN component:
Link-local frames with these destination addresses won't be trapped to
CPU port which won't conform to IEEE Std 802.1Q-2022:
01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]
In a Bridge comprising an S-VLAN component:
Link-local frames with these destination addresses will be trapped to CPU
port which won't conform to IEEE Std 802.1Q-2022:
01-80-C2-00-00-00
Link-local frames with these destination addresses won't be trapped to
CPU port which won't conform to IEEE Std 802.1Q-2022:
01-80-C2-00-00-[04,05,06,07,08,09,0A]
Currently on this switch intellectual property, if the spanning tree Port
State of the reception Port is discarding, link-local frames will be
discarded.
To trap link-local frames regardless of the spanning tree Port State, make
the switch regard them as Bridge Protocol Data Units (BPDUs). This switch
intellectual property only lets the frames regarded as BPDUs bypass the
spanning tree Port State function of the Forwarding Process.
With this change, the only remaining interference is the ingress rules.
When the reception Port has no PVID assigned on software, VLAN-untagged
frames won't be allowed in. There doesn't seem to be a mechanism on the
switch intellectual property to have link-local frames bypass this function
of the Forwarding Process.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240409-b4-for-net-mt7530-fix-link-local-when-stp-discarding-v2-1-07b1150164ac@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 58effa3476536215530c9ec4910ffc981613b413.
Review was not finished on this patch. So it's not ready for
upstreaming.
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Link: https://lore.kernel.org/r/20240409113753.2181368-1-gbayer@linux.ibm.com
Fixes: 58effa347653 ("s390/ism: fix receive message buffer allocation")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The wrong port config is being used if the PCS is reconfigured. Fix this
by correctly using the new config instead of the old one.
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409-link-mode-reconfiguration-fix-v2-1-db6a507f3627@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.9-2024-04-10:
amdgpu:
- GPU reset fixes
- Fix some confusing logging
- UMSCH fix
- Aborted suspend fix
- DCN 3.5 fixes
- S4 fix
- MES logging fixes
- SMU 14 fixes
- SDMA 4.4.2 fix
- KASAN fix
- SMU 13.0.10 fix
- VCN partition fix
- GFX11 fixes
- DWB fixes
- Plane handling fix
- FAMS fix
- DCN 3.1.6 fix
- VSC SDP fixes
- OLED panel fix
- GFX 11.5 fix
amdkfd:
- GPU reset fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411013425.6431-1-alexander.deucher@amd.com
|
|
https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes
Display fixes:
- Couple CDCLK programming fixes (Ville)
- HDCP related fix (Suraj)
- 4 Bigjoiner related fixes (Ville)
Core fix:
- Fix for a circular locking around GuC on reset+wedged case (John)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZhcJxlzc6zLMC1c-@intel.com
|
|
A couple of debug functions use a 512 byte temporary buffer and call another
function that has another buffer of the same size, which in turn exceeds the
usual warning limit for excessive stack usage:
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:1073:1: error: stack frame size (1448) exceeds limit (1024) in 'dr_dump_start' [-Werror,-Wframe-larger-than]
dr_dump_start(struct seq_file *file, loff_t *pos)
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:1009:1: error: stack frame size (1120) exceeds limit (1024) in 'dr_dump_domain' [-Werror,-Wframe-larger-than]
dr_dump_domain(struct seq_file *file, struct mlx5dr_domain *dmn)
drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:705:1: error: stack frame size (1104) exceeds limit (1024) in 'dr_dump_matcher_rx_tx' [-Werror,-Wframe-larger-than]
dr_dump_matcher_rx_tx(struct seq_file *file, bool is_rx,
Rework these so that each of the various code paths only ever has one of
these buffers in it, and exactly the functions that declare one have
the 'noinline_for_stack' annotation that prevents them from all being
inlined into the same caller.
Fixes: 917d1e799ddf ("net/mlx5: DR, Change SWS usage to debug fs seq_file interface")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/all/20240219100506.648089-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240408074142.3007036-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tariq Toukan says:
====================
mlx5 misc fixes
This patchset provides bug fixes to mlx5 driver.
This is V2 of the series previously submitted as PR by Saeed:
https://lore.kernel.org/netdev/20240326144646.2078893-1-saeed@kernel.org/T/
Series generated against:
commit 237f3cf13b20 ("xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING")
====================
Link: https://lore.kernel.org/r/20240409190820.227554-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adaptations need to be made for the auxiliary device management in the
core driver level. Block this combination for now.
Fixes: 678eb448055a ("net/mlx5: SD, Implement basic query and instantiation")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When supporting more than 128 channels, the RQT size is
calculated by multiplying the number of channels by 2
and rounding up to the nearest power of 2.
The index of the RQT is derived from the RSS hash
calculations. If XOR8 is used as the RSS hash function,
there are only 256 possible hash results, and therefore,
only 256 indexes can be reached in the RQT.
Block setting the RSS hash function to XOR when the number
of channels exceeds 128.
Fixes: 74a8dadac17e ("net/mlx5e: Preparations for supporting larger number of channels")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Free Tx port timestamping metadata entries in the NAPI poll context and
consume metadata enties in the WQE xmit path. Do not free a Tx port
timestamping metadata entry in the WQE xmit path even in the error path to
avoid a race between two metadata entry producers.
Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When creating a new HTB class while the interface is down,
the variable that follows the number of QoS SQs (htb_max_qos_sqs)
may not be consistent with the number of HTB classes.
Previously, we compared these two values to ensure that
the node_qid is lower than the number of QoS SQs, and we
allocated stats for that SQ when they are equal.
Change the check to compare the node_qid with the current
number of leaf nodes and fix the checking conditions to
ensure allocation of stats_list and stats for each node.
Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When mlx5e_priv_init() fails, the cleanup flow calls mlx5e_selq_cleanup which
calls mlx5e_selq_apply() that assures that the `priv->state_lock` is held using
lockdep_is_held().
Acquire the state_lock in mlx5e_selq_cleanup().
Kernel log:
=============================
WARNING: suspicious RCU usage
6.8.0-rc3_net_next_841a9b5 #1 Not tainted
-----------------------------
drivers/net/ethernet/mellanox/mlx5/core/en/selq.c:124 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by systemd-modules/293:
#0: ffffffffa05067b0 (devices_rwsem){++++}-{3:3}, at: ib_register_client+0x109/0x1b0 [ib_core]
#1: ffff8881096c65c0 (&device->client_data_rwsem){++++}-{3:3}, at: add_client_context+0x104/0x1c0 [ib_core]
stack backtrace:
CPU: 4 PID: 293 Comm: systemd-modules Not tainted 6.8.0-rc3_net_next_841a9b5 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x8a/0xa0
lockdep_rcu_suspicious+0x154/0x1a0
mlx5e_selq_apply+0x94/0xa0 [mlx5_core]
mlx5e_selq_cleanup+0x3a/0x60 [mlx5_core]
mlx5e_priv_init+0x2be/0x2f0 [mlx5_core]
mlx5_rdma_setup_rn+0x7c/0x1a0 [mlx5_core]
rdma_init_netdev+0x4e/0x80 [ib_core]
? mlx5_rdma_netdev_free+0x70/0x70 [mlx5_core]
ipoib_intf_init+0x64/0x550 [ib_ipoib]
ipoib_intf_alloc+0x4e/0xc0 [ib_ipoib]
ipoib_add_one+0xb0/0x360 [ib_ipoib]
add_client_context+0x112/0x1c0 [ib_core]
ib_register_client+0x166/0x1b0 [ib_core]
? 0xffffffffa0573000
ipoib_init_module+0xeb/0x1a0 [ib_ipoib]
do_one_initcall+0x61/0x250
do_init_module+0x8a/0x270
init_module_from_file+0x8b/0xd0
idempotent_init_module+0x17d/0x230
__x64_sys_finit_module+0x61/0xb0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x46/0x4e
</TASK>
Fixes: 8bf30be75069 ("net/mlx5e: Introduce select queue parameters")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changing the channels number after configuring the receive flow hash
indirection table may affect the RSS table size. The previous
configuration may no longer be compatible with the new receive flow
hash indirection table.
Block changing the channels number when RXFH is configured and changing
the channels number requires resizing the RSS table size.
Fixes: 74a8dadac17e ("net/mlx5e: Preparations for supporting larger number of channels")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct mlx5_pkt_reformat contains a naked union of a u32 id and a
dr_action pointer which is used when the action is SW-managed (when
pkt_reformat.owner is set to MLX5_FLOW_RESOURCE_OWNER_SW). Using id
directly in that case is incorrect, as it maps to the least significant
32 bits of the 64-bit pointer in mlx5_fs_dr_action and not to the pkt
reformat id allocated in firmware.
For the purpose of comparing whether two rules are identical,
interpreting the least significant 32 bits of the mlx5_fs_dr_action
pointer as an id mostly works... until it breaks horribly and produces
the outcome described in [1].
This patch fixes mlx5_flow_dests_cmp to correctly compare ids using
mlx5_fs_dr_action_get_pkt_reformat_id for the SW-managed rules.
Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1]
Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, add_rule_fg would only add newly created rules from the
handle into the tree when they had a refcount of 1. On the other hand,
create_flow_handle tries hard to find and reference already existing
identical rules instead of creating new ones.
These two behaviors can result in a situation where create_flow_handle
1) creates a new rule and references it, then
2) in a subsequent step during the same handle creation references it
again,
resulting in a rule with a refcount of 2 that is not linked into the
tree, will have a NULL parent and root and will result in a crash when
the flow group is deleted because del_sw_hw_rule, invoked on rule
deletion, assumes node->parent is != NULL.
This happened in the wild, due to another bug related to incorrect
handling of duplicate pkt_reformat ids, which lead to the code in
create_flow_handle incorrectly referencing a just-added rule in the same
flow handle, resulting in the problem described above. Full details are
at [1].
This patch changes add_rule_fg to add new rules without parents into
the tree, properly initializing them and avoiding the crash. This makes
it more consistent with how rules are added to an FTE in
create_flow_handle.
Fixes: 74491de93712 ("net/mlx5: Add multi dest support")
Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1]
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mlx5 comp irq name scheme is changed a little bit between
commit 3663ad34bc70 ("net/mlx5: Shift control IRQ to the last index")
and commit 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation").
The index in the comp irq name used to start from 0 but now it starts
from 1. There is nothing critical here, but it's harmless to change
back to the old behavior, a.k.a starting from 0.
Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation")
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Yuanyuan Zhong <yzhong@purestorage.com>
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case device is having a non fatal FW error during probe, the
driver will report the error to user via devlink. This will trigger
a WARN_ON, since mlx5 is calling devlink_register() last.
In order to avoid the WARN_ON[1], change mlx5 to invoke devl_register()
first under devlink lock.
[1]
WARNING: CPU: 5 PID: 227 at net/devlink/health.c:483 devlink_recover_notify.constprop.0+0xb8/0xc0
CPU: 5 PID: 227 Comm: kworker/u16:3 Not tainted 6.4.0-rc5_for_upstream_min_debug_2023_06_12_12_38 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_reporter_err_work [mlx5_core]
RIP: 0010:devlink_recover_notify.constprop.0+0xb8/0xc0
Call Trace:
<TASK>
? __warn+0x79/0x120
? devlink_recover_notify.constprop.0+0xb8/0xc0
? report_bug+0x17c/0x190
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? devlink_recover_notify.constprop.0+0xb8/0xc0
devlink_health_report+0x4a/0x1c0
mlx5_fw_reporter_err_work+0xa4/0xd0 [mlx5_core]
process_one_work+0x1bb/0x3c0
? process_one_work+0x3c0/0x3c0
worker_thread+0x4d/0x3c0
? process_one_work+0x3c0/0x3c0
kthread+0xc6/0xf0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: cf530217408e ("devlink: Notify users when objects are accessible")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Next patch will move devlink register to be first. Therefore, whenever
mlx5 will register a param, the user will be notified.
In order to notify the user, devlink is using the get() callback of
the param. Hence, resources that are being used by the get() callback
must be set before the devlink param is registered.
Therefore, store eswitch pointer inside mdev before registering the
param.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
"Fix possible use-after-free issue on kprobe registration.
check_kprobe_address_safe() uses `is_module_text_address()` and
`__module_text_address()` separately.
As a result, if the probed address is in a module that is being
unloaded, the first `is_module_text_address()` might return true but
then the `__module_text_address()` call might return NULL if the
module has been unloaded between the two.
The result is that kprobe believes the probe is on the kernel text,
and skips getting a module reference. In this case, when it arms a
breakpoint on the probe address, it may cause a use-after-free.
To fix this issue, only use `__module_text_address()` once and get a
reference to the module then. If it fails, reject the probe"
* tag 'probes-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Fix possible use-after-free issue on kprobe registration
|
|
In my recent commit, I missed that do_replace() handlers
use copy_from_sockptr() (which I fixed), followed
by unsafe copy_from_sockptr_offset() calls.
In all functions, we can perform the @optlen validation
before even calling xt_alloc_table_info() with the following
check:
if ((u64)optlen < (u64)tmp.size + sizeof(tmp))
return -EINVAL;
Fixes: 0c83842df40f ("netfilter: validate user input for expected length")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240409120741.3538135-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- show the original cmdline only once, and only if it was modeified by
bootconfig
* tag 'bootconfig-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fs/proc: Skip bootloader comment if no embedded kernel parameters
fs/proc: remove redundant comments from /proc/bootconfig
|
|
We weren't respecting trans->journal_replay_not_finished - we shouldn't
be searching the journal keys unless we have a ref on them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
dropping read locks in bch2_btree_node_lock_write_nofail() dates from
before we had the cycle detector; we can now tell the cycle detector
directly when taking a lock may not fail because we can't handle
transaction restarts.
This is needed for adding should_be_locked asserts.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
One btree update might have terminated in a node update, and then while
it is in flight another btree update might free that original node.
This race has to be handled in btree_update_nodes_written() - we were
missing a READ_ONCE().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add missing dependency on CONFIG_R8169_LEDS. As-is a link error occurs
if config option CONFIG_R8169_LEDS isn't enabled.
Fixes: 19fa4f2a85d7 ("r8169: fix LED-related deadlock on module removal")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-By: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/d080038c-eb6b-45ac-9237-b8c1cdd7870f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cros_ec_uart_probe() function calls devm_serdev_device_open() before
it calls serdev_device_set_client_ops(). This can trigger a NULL pointer
dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
...
? ttyport_receive_buf
A simplified version of crashing code is as follows:
static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl,
const u8 *data,
size_t count)
{
struct serdev_device *serdev = ctrl->serdev;
if (!serdev || !serdev->ops->receive_buf) // CRASH!
return 0;
return serdev->ops->receive_buf(serdev, data, count);
}
It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops
will also exist. This conflicts with the existing cros_ec_uart_probe()
logic, as it first calls devm_serdev_device_open() (which sets
SERPORT_ACTIVE), and only later sets serdev->ops via
serdev_device_set_client_ops().
Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race
condition") attempted to fix a similar race condition, but while doing
so, made the window of error for this race condition to happen much
wider.
Attempt to fix the race condition again, making sure we fully setup
before calling devm_serdev_device_open().
Fixes: 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition")
Cc: stable@vger.kernel.org
Signed-off-by: Noah Loomans <noah@noahloomans.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20240410182618.169042-2-noah@noahloomans.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is
enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board
(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting
the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to
SkyLake Huang (黃啟澤) from MediaTek for providing information on the
internal EEE switch bit.
There are existing boards that were not designed to pull the pin low.
Because of that, the EEE status currently depends on the board design.
The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually
used to control an LED. Once the bit is unset, the pin will be low. That
will make the active low LED turn on. The pin is controlled by the switch
PHY. It seems that the PHY controls the pin in the way that it inverts the
pin state. That means depending on the wiring of the LED connected to
LAN2LED0 on the board, the LED may be on without an active link.
To not cause this unwanted behaviour whilst enabling EEE on all boards, set
the internal EEE switch bit on the CORE_PLL_GROUP4 register.
My testing on MT7531 shows a certain amount of traffic loss when EEE is
enabled. That said, I haven't come across a board that enables EEE. So
enable EEE on the switch MACs but disable EEE advertisement on the switch
PHYs. This way, we don't change the behaviour of the majority of the boards
that have this switch. The mediatek-ge PHY driver already disables EEE
advertisement on the switch PHYs but my testing shows that it is somehow
enabled afterwards. Disabling EEE advertisement before the PHY driver
initialises keeps it off.
With this change, EEE can now be enabled using ethtool.
Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240408-for-net-mt7530-fix-eee-for-mt7531-mt7988-v3-1-84fdef1f008b@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus ring buffer code could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the struct
vmbus_gpadl for the ring buffers to decide whether to free the memory.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-6-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-6-mhklinux@outlook.com>
|
|
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus device UIO driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-5-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-5-mhklinux@outlook.com>
|
|
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The netvsc driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-4-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-4-mhklinux@outlook.com>
|
|
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
In order to make sure callers of vmbus_establish_gpadl() and
vmbus_teardown_gpadl() don't return decrypted/shared pages to
allocators, add a field in struct vmbus_gpadl to keep track of the
decryption status of the buffers. This will allow the callers to
know if they should free or leak the pages.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-3-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-3-mhklinux@outlook.com>
|
|
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
VMBus code could free decrypted pages if set_memory_encrypted()/decrypted()
fails. Leak the pages if this happens.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-2-mhklinux@outlook.com>
|
|
If the network configuration strings are passed as a combination of IPv4
and IPv6 addresses, the current KVP daemon does not handle processing for
the keyfile configuration format.
With these changes, the keyfile config generation logic scans through the
list twice to generate IPv4 and IPv6 sections for the configuration files
to handle this support.
Testcases ran:Rhel 9, Hyper-V VMs
(IPv4 only, IPv6 only, IPv4 and IPv6 combination)
Co-developed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Tested-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com>
|
|
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
Coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() and scnprintf() will be converted as well if these files have
such abused cases.
This patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended.
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: linux-hyperv@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240319034350.1574454-1-lizhijian@fujitsu.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240319034350.1574454-1-lizhijian@fujitsu.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes for mediatec vcodec encoder/decoder oopses
* tag 'media/v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: support 36 bits physical address
media: mediatek: vcodec: adding lock to protect encoder context list
media: mediatek: vcodec: adding lock to protect decoder context list
media: mediatek: vcodec: Fix oops when HEVC init fails
media: mediatek: vcodec: Handle VP9 superframe bitstream with 8 sub-frames
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- gcc-plugins/stackleak: Avoid .head.text section (Ard Biesheuvel)
- ubsan: fix unused variable warning in test module (Arnd Bergmann)
- Improve entropy diffusion in randomize_kstack
* tag 'hardening-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randomize_kstack: Improve entropy diffusion
ubsan: fix unused variable warning in test module
gcc-plugins/stackleak: Avoid .head.text section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Use of the CPU MSR driver is now optional
- Perf is now preferred for many counters
- Non-root users can now execute turbostat, though with limited
functionality
- Add counters for some new GFX hardware
- Minor fixes
* tag 'turbostat-2024.04.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (26 commits)
tools/power turbostat: v2024.04.10
tools/power/turbostat: Add support for Xe sysfs knobs
tools/power/turbostat: Add support for new i915 sysfs knobs
tools/power/turbostat: Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz
tools/power/turbostat: Fix uncore frequency file string
tools/power/turbostat: Unify graphics sysfs snapshots
tools/power/turbostat: Cache graphics sysfs path
tools/power/turbostat: Enable MSR_CORE_C1_RES support for ICX
tools/power turbostat: Add selftests
tools/power turbostat: read RAPL counters via perf
tools/power turbostat: Add proper re-initialization for perf file descriptors
tools/power turbostat: Clear added counters when in no-msr mode
tools/power turbostat: add early exits for permission checks
tools/power turbostat: detect and disable unavailable BICs at runtime
tools/power turbostat: Add reading aperf and mperf via perf API
tools/power turbostat: Add --no-perf option
tools/power turbostat: Add --no-msr option
tools/power turbostat: enhance -D (debug counter dump) output
tools/power turbostat: Fix warning upon failed /dev/cpu_dma_latency read
tools/power turbostat: Read base_hz and bclk from CPUID.16H if available
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes:
- intel/hid: Solve spurious hibernation aborts (power button release)
- toshiba_acpi: Ignore 2 keys to avoid log noise during
suspend/resume
- intel-vbtn: Fix probe by restoring VBDL and VGBS evalutation order
- lg-laptop: Fix W=1 %s null argument warning
New HW Support:
- acer-wmi: PH18-71 mode button and fan speed sensor
- intel/hid: Lunar Lake and Arrow Lake HID IDs"
* tag 'platform-drivers-x86-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lg-laptop: fix %s null argument warning
platform/x86: intel-vbtn: Update tablet mode switch at end of probe
platform/x86: intel-vbtn: Use acpi_has_method to check for switch
platform/x86: toshiba_acpi: Silence logging for some events
platform/x86/intel/hid: Add Lunar Lake and Arrow Lake support
platform/x86/intel/hid: Don't wake on 5-button releases
platform/x86: acer-wmi: Add support for Acer PH18-71
|
|
The bit is set and tested inside mgmt_device_connected(), therefore we
must not set it just outside the function.
Fixes: eeda1bf97bb5 ("Bluetooth: hci_event: Fix not indicating new connection for BIG Sync")
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Check user input length before copying data.
Fixes: 09572fca7223 ("Bluetooth: hci_sock: Add support for BT_{SND,RCV}BUF")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Check user input length before copying data.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Fixes: 0731c5ab4d51 ("Bluetooth: ISO: Add support for BT_PKT_STATUS")
Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Check user input length before copying data.
Fixes: 33575df7be67 ("Bluetooth: move l2cap_sock_setsockopt() to l2cap_sock.c")
Fixes: 3ee7b7cd8390 ("Bluetooth: Add BT_MODE socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
syzbot reported rfcomm_sock_setsockopt_old() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt_old
net/bluetooth/rfcomm/sock.c:632 [inline]
BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt+0x893/0xa70
net/bluetooth/rfcomm/sock.c:673
Read of size 4 at addr ffff8880209a8bc3 by task syz-executor632/5064
Fixes: 9f2c8a03fbb3 ("Bluetooth: Replace RFCOMM link mode with security level")
Fixes: bb23c0ab8246 ("Bluetooth: Add support for deferring RFCOMM connection setup")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
syzbot reported sco_sock_setsockopt() is copying data without
checking user input length.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578
Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Fixes: b96e9c671b05 ("Bluetooth: Add BT_DEFER_SETUP option to sco socket")
Fixes: 00398e1d5183 ("Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connections")
Fixes: f6873401a608 ("Bluetooth: Allow setting of codec for HFP offload use case")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In 'hci_req_sync_complete()', always free the previous sync
request state before assigning reference to a new one.
Reported-by: syzbot+39ec16ff6cc18b1d066d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=39ec16ff6cc18b1d066d
Cc: stable@vger.kernel.org
Fixes: f60cb30579d3 ("Bluetooth: Convert hci_req_sync family of function to new request API")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Coded PHY recommended intervals are 3 time bigger than the 1M PHY so
this aligns with that by multiplying by 3 the values given to 1M PHY
since the code already used recommended values for that.
Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Consider certain values (0x00) as unset and load proper default if
an application has not set them properly.
Fixes: 0fe8c8d07134 ("Bluetooth: Split bt_iso_qos into dedicated structures")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty
pages are collected by VMM and the page table entries become write
protected during live migration. Unfortunately, the operand passed
to the TLBI RANGE instruction isn't correctly sorted out due to the
commit 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()").
It leads to crash on the destination VM after live migration because
TLBs aren't flushed completely and some of the dirty pages are missed.
For example, I have a VM where 8GB memory is assigned, starting from
0x40000000 (1GB). Note that the host has 4KB as the base page size.
In the middile of migration, kvm_tlb_flush_vmid_range() is executed
to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to
__kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3
and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported
by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned
from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop
in the __flush_tlb_range_op() until the variable @scale underflows
and becomes -9, 0xffff708000040000 is set as the operand. The operand
is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to
invalid @scale and @num.
Fix it by extending __TLBI_RANGE_NUM() to support the combination of
SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can
be returned from the macro, meaning the TLBs for 0x200000 pages in the
above example can be flushed in one shoot with SCALE#3 and NUM#31. The
macro TLBI_RANGE_MASK is dropped since no one uses it any more. The
comments are also adjusted accordingly.
Fixes: 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()")
Cc: stable@kernel.org # v6.6+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-2-gshan@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When unloading a module, its state is changing MODULE_STATE_LIVE ->
MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take
a time. `is_module_text_address()` and `__module_text_address()`
works with MODULE_STATE_LIVE and MODULE_STATE_GOING.
If we use `is_module_text_address()` and `__module_text_address()`
separately, there is a chance that the first one is succeeded but the
next one is failed because module->state becomes MODULE_STATE_UNFORMED
between those operations.
In `check_kprobe_address_safe()`, if the second `__module_text_address()`
is failed, that is ignored because it expected a kernel_text address.
But it may have failed simply because module->state has been changed
to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify
non-exist module text address (use-after-free).
To fix this problem, we should not use separated `is_module_text_address()`
and `__module_text_address()`, but use only `__module_text_address()`
once and do `try_module_get(module)` which is only available with
MODULE_STATE_LIVE.
Link: https://lore.kernel.org/all/20240410015802.265220-1-zhengyejian1@huawei.com/
Fixes: 28f6c37a2910 ("kprobes: Forbid probing on trampoline and BPF code areas")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
LoongArch's include/asm/addrspace.h uses SZ_32M and SZ_16K, so add
<linux/sizes.h> to provide those macros to prevent build errors:
In file included from ../arch/loongarch/include/asm/io.h:11,
from ../include/linux/io.h:13,
from ../include/linux/io-64-nonatomic-lo-hi.h:5,
from ../drivers/cxl/pci.c:4:
../include/asm-generic/io.h: In function 'ioport_map':
../arch/loongarch/include/asm/addrspace.h:124:25: error: 'SZ_32M' undeclared (first use in this function); did you mean 'PS_32M'?
124 | #define PCI_IOSIZE SZ_32M
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Current dts file for Loongson-2K2000's GMAC/GNET is incomplete, both irq
and phy descriptions are missing. Add them to make GMAC/GNET work.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Current dts file for Loongson-2K2000 misses the interrupt-controller &
interrupt-cells descriptions in the msi-controller node, and misses the
msi-parent link in the pci root node. Add them to support PCI-MSI.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some Loongson-2K2000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error. Also adjust
the PCI io resource range to avoid confliction.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some Loongson-2K1000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When enabling both CONFIG_KFENCE and CONFIG_DEBUG_SG, I get the
following backtraces when running LongArch kernels.
[ 2.496257] kernel BUG at include/linux/scatterlist.h:187!
...
[ 2.501925] Call Trace:
[ 2.501950] [<9000000004ad59c4>] sg_init_one+0xac/0xc0
[ 2.502204] [<9000000004a438f8>] do_test_kpp+0x278/0x6e4
[ 2.502353] [<9000000004a43dd4>] alg_test_kpp+0x70/0xf4
[ 2.502494] [<9000000004a41b48>] alg_test+0x128/0x690
[ 2.502631] [<9000000004a3d898>] cryptomgr_test+0x20/0x40
[ 2.502775] [<90000000041b4508>] kthread+0x138/0x158
[ 2.502912] [<9000000004161c48>] ret_from_kernel_thread+0xc/0xa4
The backtrace is always similar but not exactly the same. It is always
triggered from cryptomgr_test, but not always from the same test.
Analysis shows that with CONFIG_KFENCE active, the address returned from
kmalloc() and friends is not always below vm_map_base. It is allocated
by kfence_alloc() which at least sometimes seems to get its memory from
an address space above vm_map_base. This causes __virt_addr_valid() to
return false for the affected objects.
Let __virt_addr_valid() return 1 for kfence pool addresses, this make
virt_addr_valid()/__virt_addr_valid() work with KFENCE.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
KFENCE changes virt_to_page() to be able to translate tlb mapped virtual
addresses, but forget to change virt_to_phys()/phys_to_virt() and other
translation functions as well. This patch fix it, otherwise some drivers
(such as nvme and virtio-blk) cannot work with KFENCE.
All {virt, phys, page, pfn} translation functions are updated:
1, virt_to_pfn()/pfn_to_virt();
2, virt_to_page()/page_to_virt();
3, virt_to_phys()/phys_to_virt().
DMW/TLB mapped addresses are distinguished by comparing the vaddress
with vm_map_base in virt_to_xyz(), and we define WANT_PAGE_VIRTUAL in
the KFENCE case for the reverse translations, xyz_to_virt().
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch will override page_to_virt() which use page_address() in the
KFENCE case (by defining WANT_PAGE_VIRTUAL/HASHED_PAGE_VIRTUAL). So move
lowmem_page_address() a little later to avoid such build errors:
error: implicit declaration of function 'page_address'.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Much of turbostat can now run with perf, rather than using the MSR driver
Some of turbostat can now run as a regular non-root user.
Add some new output columns for some new GFX hardware.
[This patch updates the version, but otherwise changes no function;
it touches up some checkpatch issues from previous patches]
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Xe graphics driver uses different graphics sysfs knobs including
/sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt0/freq0/act_freq
/sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt1/freq0/act_freq
Plus that,
/sys/class/drm/card0/device/tile0/gt<n>/gtidle/name
returns either gt<n>-rc or gt<n>-mc. rc is for GFX and mc is SA Media.
Enhance turbostat to prefer the Xe sysfs knobs when they are available.
Export gt<n>-rc via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt<n>-mc via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
On Meteorlake platform, i915 driver supports the traditional graphics
sysfs knobs including
/sys/class/drm/card0/power/rc6_residency_ms
/sys/class/drm/card0/gt_cur_freq_mhz
/sys/class/drm/card0/gt_act_freq_mhz
At the same time, it also supports
/sys/class/drm/card0/gt/gt0/rc6_residency_ms
/sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt0/rps_act_freq_mhz
/sys/class/drm/card0/gt/gt1/rc6_residency_ms
/sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt1/rps_act_freq_mhz
gt0 is for GFX and gt1 is for SA Media.
Enhance turbostat to prefer the i915 new sysfs knobs.
Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Graphics driver (i915/Xe) on mordern platforms splits GFX and SA Media
information via different sysfs knobs.
Existing BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz columns can be reused for
GFX.
Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz columns for SA Media.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Binding devm_led_classdev_register() to the netdev is problematic
because on module removal we get a RTNL-related deadlock. Fix this
by avoiding the device-managed LED functions.
Note: We can safely call led_classdev_unregister() for a LED even
if registering it failed, because led_classdev_unregister() detects
this and is a no-op in this case.
Fixes: 18764b883e15 ("r8169: add support for LED's on RTL8168/RTL8101")
Cc: stable@vger.kernel.org
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the driver notices fw_status == 0xff it tries to perform a PCI
reset on itself via pci_reset_function() in the context of the driver's
health thread. However, pdsc_reset_prepare calls
pdsc_stop_health_thread(), which attempts to stop/flush the health
thread. This results in a deadlock because the stop/flush will never
complete since the driver called pci_reset_function() from the health
thread context. Fix by changing the pdsc_check_pci_health_function()
to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's
work queue.
Unloading the driver in the fw_down/dead state uncovered another issue,
which can be seen in the following trace:
WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440
[...]
RIP: 0010:__queue_work+0x358/0x440
[...]
Call Trace:
<TASK>
? __warn+0x85/0x140
? __queue_work+0x358/0x440
? report_bug+0xfc/0x1e0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __queue_work+0x358/0x440
queue_work_on+0x28/0x30
pdsc_devcmd_locked+0x96/0xe0 [pds_core]
pdsc_devcmd_reset+0x71/0xb0 [pds_core]
pdsc_teardown+0x51/0xe0 [pds_core]
pdsc_remove+0x106/0x200 [pds_core]
pci_device_remove+0x37/0xc0
device_release_driver_internal+0xae/0x140
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xa0
pdsc_cleanup_module+0x10/0x780 [pds_core]
__x64_sys_delete_module+0x142/0x2b0
? syscall_trace_enter.isra.18+0x126/0x1a0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fbd9d03a14b
[...]
Fix this by preventing the devcmd reset if the FW is not running.
Fixes: d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch to differentiate external rev id for gfx 11.5.0.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
OLED panels show no display for large vtotal timings.
[How]
Check if ss is enabled and read from lut for spread spectrum percentage.
Adjust dprefclk as required. DP_DTO adjustment is for edp only.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The previous check for the is_vsc_sdp_colorimetry_supported flag
for MST sink signals did nothing. Simplify the code and use the
same check for MST and SST.
Cc: stable@vger.kernel.org
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In order for display colorimetry to work correctly on DP displays
we need to send the VSC SDP packet. We should only do so for
panels with DPCD revision greater or equal to 1.4 as older
receivers might have problems with it.
Cc: stable@vger.kernel.org
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Wrong logic cause screen corruption.
[How]
Port logic from DCN35/314.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
We should not be recursively calling the manual trigger programming function when
FAMS is not in use.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
In current implemenation ODM mode is only reset when the last plane is
removed from dc state. For any dc validate we will always remove all
current planes and add new planes. However when switching from no planes
to 1 plane, ODM mode is not reset because no planes get removed. This
has caused an issue where we kept ODM combine when it should have been
remove when a plane is added. The change is to reset ODM mode when
adding the first plane.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The RB bitmap should be global active RB bitmap &
active RB bitmap based on active SA.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
mode_config's max width x height is 4096x2160 and is higher than DWB's
max resolution 3840x2160 which is returned instead.
Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If there are more than one device doing reset in parallel, the first
device will call kfd_suspend_all_processes() to evict all processes
on all devices, this call takes time to finish. other device will
start reset and recover without waiting. if the process has not been
evicted before doing recover, it will be restored, then caused page
fault.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
set_q_mode_offs don't get cleared after GPU reset, nexting SET_Q_MODE
packet to init shadow memory will be skiped, hence there has a page fault.
[How]
VM flush is needed after GPU reset, clear set_q_mode_offs when
emitting VM flush.
Fixes: 8bc75586ea01 ("drm/amdgpu: workaround to avoid SET_Q_MODE packets v2")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
VCN need not be shared in CPX mode always for all GFX 9.4.3 SOC SKUs. In
certain configs, VCN instance can be exclusively allocated to a
partition even under CPX mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fix the high voltage issue after unload on smu 13.0.10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
dynamic memory safety error detector (KASAN) catches and generates error
messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not
support certain features which are not initialized.
[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA_CNTL is not set in some cases, driver configures it by itself.
v2: simplify code
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch to add smu 14.0.1 support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
From MES version 0x54, the log entry increased and require the log buffer
size to be increased. The 16k is maximum size agreed
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The MES log might slow down the performance for extra step of log the data,
disable it by default and introduce a parameter can enable it when necessary
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
While doing multiple S4 stress tests, GC/RLC/PMFW get into
an invalid state resulting into hard hangs.
Adding a GFX reset as workaround just before sending the
MP1_UNLOAD message avoids this failure.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a new DCN veriosn 3.5.1 need to load
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For SOC21 ASICs, there is an issue in re-enabling PM features if a
suspend got aborted. In such cases, reset the device during resume
phase. This is a workaround till a proper solution is finalized.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Otherwise the old one will be used during GPU reset.
That's not expected.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Downgrade to debug information when IBs are skipped. Also, use dev_* to
identify the device.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are cases where soft reset seems to succeed, but
does not, so always use mode1/2 for now.
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Currently, with F32 HWS GPU reset is only when unmap queue fails.
However, if compute queue doesn't repond to preemption request in time
unmap will return without any error. In this case, only preemption error
is logged and Reset is not triggered. Call GPU reset in this case also.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it
still means hlist_for_each_entry_rcu can return an item that got removed
from the list. The memory itself of such item is not freed thanks to RCU
but nothing guarantees the actual content of the memory is sane.
In particular, the reference count can be zero. This can happen if
ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry
from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all
references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough
timing, this can happen:
1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry.
2. Then, the whole ipv6_del_addr is executed for the given entry. The
reference count drops to zero and kfree_rcu is scheduled.
3. ipv6_get_ifaddr continues and tries to increments the reference count
(in6_ifa_hold).
4. The rcu is unlocked and the entry is freed.
5. The freed entry is returned.
Prevent increasing of the reference count in such case. The name
in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe.
[ 41.506330] refcount_t: addition on 0; use-after-free.
[ 41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130
[ 41.507413] Modules linked in: veth bridge stp llc
[ 41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14
[ 41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
[ 41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130
[ 41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff
[ 41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282
[ 41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000
[ 41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900
[ 41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff
[ 41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000
[ 41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48
[ 41.514086] FS: 00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000
[ 41.514726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0
[ 41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 41.516799] Call Trace:
[ 41.517037] <TASK>
[ 41.517249] ? __warn+0x7b/0x120
[ 41.517535] ? refcount_warn_saturate+0xa5/0x130
[ 41.517923] ? report_bug+0x164/0x190
[ 41.518240] ? handle_bug+0x3d/0x70
[ 41.518541] ? exc_invalid_op+0x17/0x70
[ 41.520972] ? asm_exc_invalid_op+0x1a/0x20
[ 41.521325] ? refcount_warn_saturate+0xa5/0x130
[ 41.521708] ipv6_get_ifaddr+0xda/0xe0
[ 41.522035] inet6_rtm_getaddr+0x342/0x3f0
[ 41.522376] ? __pfx_inet6_rtm_getaddr+0x10/0x10
[ 41.522758] rtnetlink_rcv_msg+0x334/0x3d0
[ 41.523102] ? netlink_unicast+0x30f/0x390
[ 41.523445] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 41.523832] netlink_rcv_skb+0x53/0x100
[ 41.524157] netlink_unicast+0x23b/0x390
[ 41.524484] netlink_sendmsg+0x1f2/0x440
[ 41.524826] __sys_sendto+0x1d8/0x1f0
[ 41.525145] __x64_sys_sendto+0x1f/0x30
[ 41.525467] do_syscall_64+0xa5/0x1b0
[ 41.525794] entry_SYSCALL_64_after_hwframe+0x72/0x7a
[ 41.526213] RIP: 0033:0x7fbc4cfcea9a
[ 41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
[ 41.527942] RSP: 002b:00007ffcf54012a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 41.528593] RAX: ffffffffffffffda RBX: 00007ffcf5401368 RCX: 00007fbc4cfcea9a
[ 41.529173] RDX: 000000000000002c RSI: 00007fbc4b9d9bd0 RDI: 0000000000000005
[ 41.529786] RBP: 00007fbc4bafb040 R08: 00007ffcf54013e0 R09: 000000000000000c
[ 41.530375] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 41.530977] R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007fbc4ca85d1b
[ 41.531573] </TASK>
Fixes: 5c578aedcb21d ("IPv6: convert addrconf hash list to RCU")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Link: https://lore.kernel.org/r/8ab821e36073a4a406c50ec83c9e8dc586c539e4.1712585809.git.jbenc@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net: start to replace copy_from_sockptr()
We got several syzbot reports about unsafe copy_from_sockptr()
calls. After fixing some of them, it appears that we could
use a new helper to factorize all the checks in one place.
This series targets net tree, we can later start converting
many call sites in net-next.
====================
Link: https://lore.kernel.org/r/20240408082845.3957374-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported unsafe calls to copy_from_sockptr() [1]
Use copy_safe_from_sockptr() instead.
[1]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255
Read of size 4 at addr ffff88801caa1ec3 by task syz-executor459/5078
CPU: 0 PID: 5078 Comm: syz-executor459 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
copy_from_sockptr include/linux/sockptr.h:55 [inline]
nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255
do_sock_setsockopt+0x3b1/0x720 net/socket.c:2311
__sys_setsockopt+0x1ae/0x250 net/socket.c:2334
__do_sys_setsockopt net/socket.c:2343 [inline]
__se_sys_setsockopt net/socket.c:2340 [inline]
__x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xfd/0x240
entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7f7fac07fd89
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff660eb788 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f7fac07fd89
RDX: 0000000000000000 RSI: 0000000000000118 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000020000a80 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240408082845.3957374-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reports one unsafe call to copy_from_sockptr() [1]
Use copy_safe_from_sockptr() instead.
[1]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417
Read of size 4 at addr ffff0000c6d54083 by task syz-executor406/6167
CPU: 1 PID: 6167 Comm: syz-executor406 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call trace:
dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x178/0x518 mm/kasan/report.c:488
kasan_report+0xd8/0x138 mm/kasan/report.c:601
__asan_report_load_n_noabort+0x1c/0x28 mm/kasan/report_generic.c:391
copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
copy_from_sockptr include/linux/sockptr.h:55 [inline]
data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417
do_sock_setsockopt+0x2a0/0x4e0 net/socket.c:2311
__sys_setsockopt+0x128/0x1a8 net/socket.c:2334
__do_sys_setsockopt net/socket.c:2343 [inline]
__se_sys_setsockopt net/socket.c:2340 [inline]
__arm64_sys_setsockopt+0xb8/0xd4 net/socket.c:2340
__invoke_syscall arch/arm64/kernel/syscall.c:34 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:48
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:133
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:152
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
Fixes: 1b2b03f8e514 ("Add mISDN core files")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Link: https://lore.kernel.org/r/20240408082845.3957374-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
copy_from_sockptr() helper is unsafe, unless callers
did the prior check against user provided optlen.
Too many callers get this wrong, lets add a helper to
fix them and avoid future copy/paste bugs.
Instead of :
if (optlen < sizeof(opt)) {
err = -EINVAL;
break;
}
if (copy_from_sockptr(&opt, optval, sizeof(opt)) {
err = -EFAULT;
break;
}
Use :
err = copy_safe_from_sockptr(&opt, sizeof(opt),
optval, optlen);
if (err)
break;
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240408082845.3957374-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a device wasn't used for btree nodes, no need to scan for them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The 'r' key is near to 't' key, that makes 'with' to be 'wirh' ? :)
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Link: https://lore.kernel.org/r/20240409173531.846714-1-haiyue.wang@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with:
turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory
We observe the sysfs uncore frequency directories named:
...
package_09_die_00/
package_10_die_00/
package_11_die_00/
...
package_15_die_00/
The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used
with each instance of reading uncore frequency files. uncore-frequency-common.c
creates the sysfs directory with the format "package_%02d_die_%02d". Once the
package value reaches double digits, the formats diverge.
Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d".
[lenb: deleted the probe part of this patch, as it was already fixed]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Graphics sysfs snapshots share similar logic.
Combine them into one function to avoid code duplication.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Graphics drivers (i915/Xe) have different sysfs knobs on different
platforms, and it is possible that different sysfs knobs fit into the
same turbostat columns.
Instead of specifying different sysfs knobs every time, detect them
once and cache the path for future use.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Enable Core C1 hardware residency counter (MSR_CORE_C1_RES) on ICX.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Some of the future Intel platforms will require reading the RAPL
counters via perf and not MSR. On current platforms we can still read
them using both ways.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Enable DMA mappings in vmwgfx after TTM has been fixed in commit
3bf3710e3718 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")
This enables full guest-backed memory support and in particular allows
usage of screen targets as the presentation mechanism.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reported-by: Ye Li <ye.li@broadcom.com>
Tested-by: Ye Li <ye.li@broadcom.com>
Fixes: 3b0d6458c705 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408022802.358641-1-zack.rusin@broadcom.com
|
|
Pull drm nouveau fix from Dave Airlie:
"A previous fix to nouveau devinit on the GSP paths fixed the Turing
but broke Ampere, I did some more digging and found the proper fix.
Sending it early as I want to make sure it makes the next 6.8 stable
kernels to fix the regression.
Regular fixes will be at end of week as usual.
nouveau:
- regression fix for GSP display enable"
* tag 'drm-fixes-2024-04-09' of https://gitlab.freedesktop.org/drm/kernel:
nouveau: fix devinit paths to only handle display on GSP.
|
|
Add a missing doublequote in the __is_constexpr() macro comment.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Switch Krzysztof Kozlowski's to @kernel.org account.
Link: https://lore.kernel.org/r/20240329174823.74918-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
thread_info.syscall is used by syscall_get_nr to supply syscall nr
over a thread stack frame.
Previously, thread_info.syscall is only saved at syscall_trace_enter
when syscall tracing is enabled. However rest of the kernel code do
expect syscall_get_nr to be available without syscall tracing. The
previous design breaks collect_syscall.
Move saving process to syscall entry to fix it.
Reported-by: Xi Ruoyao <xry111@xry111.site>
Link: https://github.com/util-linux/util-linux/issues/2867
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
If the "bootconfig" kernel command-line argument was specified or if
the kernel was built with CONFIG_BOOT_CONFIG_FORCE, but if there are
no embedded kernel parameter, omit the "# Parameters from bootloader:"
comment from the /proc/bootconfig file. This will cause automation
to fall back to the /proc/cmdline file, which will be identical to the
comment in this no-embedded-kernel-parameters case.
Link: https://lore.kernel.org/all/20240409044358.1156477-2-paulmck@kernel.org/
Fixes: 8b8ce6c75430 ("fs/proc: remove redundant comments from /proc/bootconfig")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
commit 717c7c894d4b ("fs/proc: Add boot loader arguments as comment to
/proc/bootconfig") adds bootloader argument comments into /proc/bootconfig.
/proc/bootconfig shows boot_command_line[] multiple times following
every xbc key value pair, that's duplicated and not necessary.
Remove redundant ones.
Output before and after the fix is like:
key1 = value1
*bootloader argument comments*
key2 = value2
*bootloader argument comments*
key3 = value3
*bootloader argument comments*
...
key1 = value1
key2 = value2
key3 = value3
*bootloader argument comments*
...
Link: https://lore.kernel.org/all/20240409044358.1156477-1-paulmck@kernel.org/
Fixes: 717c7c894d4b ("fs/proc: Add boot loader arguments as comment to /proc/bootconfig")
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: <linux-trace-kernel@vger.kernel.org>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V SoC driver fixes for v6.9-rc3
A fix for the ccache driver which no longer probed after the PLIC driver
was converted to a platform driver. The JH7100 SoC depends on this
driver to provide cache management ops that must be registered with an
arch_initcall, so the ccache driver is partly converted to a platform
driver, registering only the cache management ops with the initcall and
the debug/edac register provision features of the driver as a platform
driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.9-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
cache: sifive_ccache: Partially convert to a platform driver
Link: https://lore.kernel.org/r/20240406-botch-disband-efc69b8236be@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.9
A single fix to address the incorrect check of VM ID count for the
global notification in the response received for FFA_NOTIFICATION_INFO_GET()
in the schedule receiver interrupt handler.
* tag 'ffa-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
Link: https://lore.kernel.org/r/20240404140339.450509-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.9
Couple of fixes to address wrong fastchannel initialization in powercap
protocol and disable seeking support for SCMI raw debugfs entries.
* tag 'scmi-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Make raw debugfs entries non-seekable
firmware: arm_scmi: Fix wrong fastchannel initialization
Link: https://lore.kernel.org/r/20240404140306.450330-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.9:
- A couple of i.MX7 board fixes from Fabio Estevam that use correct
'no-mmc' property and pass 'link-frequencies' for OV2680.
- A series from Frank Li to fix LPCG clock indices for i.MX8 subsystems.
- A couple of changes from Tim Harvey that fix USB VBUS regulator for
imx8mp-venice board.
* tag 'imx-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix adc lpcg indices
arm64: dts: imx8-ss-dma: fix pwm lpcg indices
arm64: dts: imx8-ss-dma: fix spi lpcg indices
arm64: dts: imx8-ss-conn: fix usb lpcg indices
arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
ARM: dts: imx7-mba7: Use 'no-mmc' property
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
Link: https://lore.kernel.org/r/Zg5rfaVVvD9egoBK@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
GPIO regression fixes for n8x0
A series of fixes for n8x0 GPIO regressions caused by the changes to use
GPIO descriptors.
* tag 'omap-for-v6.9/n8x0-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: fix USB regression on Nokia N8x0
mmc: omap: restore original power up/down steps
mmc: omap: fix deferred probe
mmc: omap: fix broken slot switch lookup
ARM: OMAP2+: fix N810 MMC gpiod table
ARM: OMAP2+: fix bogus MMC GPIO labels on Nokia N8x0
Link: https://lore.kernel.org/r/pull-1712135932-125424@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The log_martians variable is only used in an #ifdef, causing a 'make W=1'
warning with gcc:
net/ipv4/route.c: In function 'ip_rt_send_redirect':
net/ipv4/route.c:880:13: error: variable 'log_martians' set but not used [-Werror=unused-but-set-variable]
Change the #ifdef to an equivalent IS_ENABLED() to let the compiler
see where the variable is used.
Fixes: 30038fc61adf ("net: ip_rt_send_redirect() optimization")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240408074219.3030256-2-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When CONFIG_IPV6_SUBTREES is disabled, the only user is hidden, causing
a 'make W=1' warning:
net/ipv6/ip6_fib.c: In function 'fib6_add':
net/ipv6/ip6_fib.c:1388:32: error: variable 'pn' set but not used [-Werror=unused-but-set-variable]
Add another #ifdef around the variable declaration, matching the other
uses in this file.
Fixes: 66729e18df08 ("[IPV6] ROUTE: Make sure we have fn->leaf when adding a node on subtree.")
Link: https://lore.kernel.org/netdev/20240322131746.904943-1-arnd@kernel.org/
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240408074219.3030256-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
NIX SQ mode and link backpressure configuration is required for
all platforms. But in current driver this code is wrongly placed
under specific platform check. This patch fixes the issue by
moving the code out of platform check.
Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20240408063643.26288-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
shoot down journal keys _before_ populating journal keys with pointers
to scanned nodes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.9
Pull MD fix from Song:
"This change, by Yu Kuai, fixes a UAF in a corner case."
* tag 'md-6.9-20240408' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
raid1: fix use-after-free for original bio in raid1_write_request()
|
|
cac9e4418f4cb ("io_uring/net: save msghdr->msg_control for retries")
reinstatiates msg_control before every __sys_sendmsg_sock(), since the
function can overwrite the value in msghdr. We need to do same for
zerocopy sendmsg.
Cc: stable@vger.kernel.org
Fixes: 493108d95f146 ("io_uring/net: zerocopy sendmsg")
Link: https://github.com/axboe/liburing/issues/1067
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cc1d5d9df0576fa66ddad4420d240a98a020b267.1712596179.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts:
nouveau/gsp: don't check devinit disable on GSP.
and applies a further fix.
It turns out the open gpu driver, checks this register,
but only for display.
Match that behaviour and in the turing path only disable
the display block. (ampere already only does displays).
Fixes: 5d4e8ae6e57b ("nouveau/gsp: don't check devinit disable on GSP.")
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408064243.2219527-1-airlied@gmail.com
|
|
Pull x86 mitigations from Thomas Gleixner:
"Mitigations for the native BHI hardware vulnerabilty:
Branch History Injection (BHI) attacks may allow a malicious
application to influence indirect branch prediction in kernel by
poisoning the branch history. eIBRS isolates indirect branch targets
in ring0. The BHB can still influence the choice of indirect branch
predictor entry, and although branch predictor entries are isolated
between modes when eIBRS is enabled, the BHB itself is not isolated
between modes.
Add mitigations against it either with the help of microcode or with
software sequences for the affected CPUs"
[ This also ends up enabling the full mitigation by default despite the
system call hardening, because apparently there are other indirect
calls that are still sufficiently reachable, and the 'auto' case just
isn't hardened enough.
We'll have some more inevitable tweaking in the future - Linus ]
* tag 'nativebhi' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Add BHI_NO
x86/bhi: Mitigate KVM by default
x86/bhi: Add BHI mitigation knob
x86/bhi: Enumerate Branch History Injection (BHI) bug
x86/bhi: Define SPEC_CTRL_BHI_DIS_S
x86/bhi: Add support for clearing branch history at syscall entry
x86/syscall: Don't force use of indirect calls for system calls
x86/bugs: Change commas to semicolons in 'spectre_v2' sysfs file
|
|
syzkaller started to report deadlock of unix_gc_lock after commit
4090fa373f0e ("af_unix: Replace garbage collection algorithm."), but
it just uncovers the bug that has been there since commit 314001f0bf92
("af_unix: Add OOB support").
The repro basically does the following.
from socket import *
from array import array
c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
c1.sendmsg([b'a'], [(SOL_SOCKET, SCM_RIGHTS, array("i", [c2.fileno()]))], MSG_OOB)
c2.recv(1) # blocked as no normal data in recv queue
c2.close() # done async and unblock recv()
c1.close() # done async and trigger GC
A socket sends its file descriptor to itself as OOB data and tries to
receive normal data, but finally recv() fails due to async close().
The problem here is wrong handling of OOB skb in manage_oob(). When
recvmsg() is called without MSG_OOB, manage_oob() is called to check
if the peeked skb is OOB skb. In such a case, manage_oob() pops it
out of the receive queue but does not clear unix_sock(sk)->oob_skb.
This is wrong in terms of uAPI.
Let's say we send "hello" with MSG_OOB, and "world" without MSG_OOB.
The 'o' is handled as OOB data. When recv() is called twice without
MSG_OOB, the OOB data should be lost.
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM, 0)
>>> c1.send(b'hello', MSG_OOB) # 'o' is OOB data
5
>>> c1.send(b'world')
5
>>> c2.recv(5) # OOB data is not received
b'hell'
>>> c2.recv(5) # OOB date is skipped
b'world'
>>> c2.recv(5, MSG_OOB) # This should return an error
b'o'
In the same situation, TCP actually returns -EINVAL for the last
recv().
Also, if we do not clear unix_sk(sk)->oob_skb, unix_poll() always set
EPOLLPRI even though the data has passed through by previous recv().
To avoid these issues, we must clear unix_sk(sk)->oob_skb when dequeuing
it from recv queue.
The reason why the old GC did not trigger the deadlock is because the
old GC relied on the receive queue to detect the loop.
When it is triggered, the socket with OOB data is marked as GC candidate
because file refcount == inflight count (1). However, after traversing
all inflight sockets, the socket still has a positive inflight count (1),
thus the socket is excluded from candidates. Then, the old GC lose the
chance to garbage-collect the socket.
With the old GC, the repro continues to create true garbage that will
never be freed nor detected by kmemleak as it's linked to the global
inflight list. That's why we couldn't even notice the issue.
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: syzbot+7f7f201cc2668a8fd169@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7f7f201cc2668a8fd169
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240405221057.2406-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- fix return types: promoting from unsigned to ssize_t does not do what
we want here, and was pointless since the rest of the eytzinger code
is u32
- nr, not size
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The ks8851_irq() thread may call ks8851_rx_pkts() in case there are
any packets in the MAC FIFO, which calls netif_rx(). This netif_rx()
implementation is guarded by local_bh_disable() and local_bh_enable().
The local_bh_enable() may call do_softirq() to run softirqs in case
any are pending. One of the softirqs is net_rx_action, which ultimately
reaches the driver .start_xmit callback. If that happens, the system
hangs. The entire call chain is below:
ks8851_start_xmit_par from netdev_start_xmit
netdev_start_xmit from dev_hard_start_xmit
dev_hard_start_xmit from sch_direct_xmit
sch_direct_xmit from __dev_queue_xmit
__dev_queue_xmit from __neigh_update
__neigh_update from neigh_update
neigh_update from arp_process.constprop.0
arp_process.constprop.0 from __netif_receive_skb_one_core
__netif_receive_skb_one_core from process_backlog
process_backlog from __napi_poll.constprop.0
__napi_poll.constprop.0 from net_rx_action
net_rx_action from __do_softirq
__do_softirq from call_with_stack
call_with_stack from do_softirq
do_softirq from __local_bh_enable_ip
__local_bh_enable_ip from netif_rx
netif_rx from ks8851_irq
ks8851_irq from irq_thread_fn
irq_thread_fn from irq_thread
irq_thread from kthread
kthread from ret_from_fork
The hang happens because ks8851_irq() first locks a spinlock in
ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...)
and with that spinlock locked, calls netif_rx(). Once the execution
reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again
which attempts to claim the already locked spinlock again, and the
hang happens.
Move the do_softirq() call outside of the spinlock protected section
of ks8851_irq() by disabling BHs around the entire spinlock protected
section of ks8851_irq() handler. Place local_bh_enable() outside of
the spinlock protected section, so that it can trigger do_softirq()
without the ks8851_par.c ks8851_lock_par() spinlock being held, and
safely call ks8851_start_xmit_par() without attempting to lock the
already locked spinlock.
Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable()
now, replace netif_rx() with __netif_rx() which is not duplicating the
local_bh_disable()/local_bh_enable() calls.
Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240405203204.82062-2-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both ks8851_rx_skb_par() and ks8851_rx_skb_spi() call netif_rx(skb),
inline the netif_rx(skb) call directly into ks8851_common.c and drop
the .rx_skb callback and ks8851_rx_skb() wrapper. This removes one
indirect call from the driver, no functional change otherwise.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240405203204.82062-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several fixes to qgroups that have been recently identified by test
generic/475:
- fix prealloc reserve leak in subvolume operations
- various other fixes in reservation setup, conversion or cleanup"
* tag 'for-6.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: always clear PERTRANS metadata during commit
btrfs: make btrfs_clear_delalloc_extent() free delalloc reserve
btrfs: qgroup: convert PREALLOC to PERTRANS after record_root_in_trans
btrfs: record delayed inode root in transaction
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
btrfs: qgroup: correctly model root qgroup rsv in convert
|
|
Intel processors that aren't vulnerable to BHI will set
MSR_IA32_ARCH_CAPABILITIES[BHI_NO] = 1;. Guests may use this BHI_NO bit to
determine if they need to implement BHI mitigations or not. Allow this bit
to be passed to the guests.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
BHI mitigation mode spectre_bhi=auto does not deploy the software
mitigation by default. In a cloud environment, it is a likely scenario
where userspace is trusted but the guests are not trusted. Deploying
system wide mitigation in such cases is not desirable.
Update the auto mode to unconditionally mitigate against malicious
guests. Deploy the software sequence at VMexit in auto mode also, when
hardware mitigation is not available. Unlike the force =on mode,
software sequence is not deployed at syscalls in auto mode.
Suggested-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Branch history clearing software sequences and hardware control
BHI_DIS_S were defined to mitigate Branch History Injection (BHI).
Add cmdline spectre_bhi={on|off|auto} to control BHI mitigation:
auto - Deploy the hardware mitigation BHI_DIS_S, if available.
on - Deploy the hardware mitigation BHI_DIS_S, if available,
otherwise deploy the software sequence at syscall entry and
VMexit.
off - Turn off BHI mitigation.
The default is auto mode which does not deploy the software sequence
mitigation. This is because of the hardening done in the syscall
dispatch path, which is the likely target of BHI.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Mitigation for BHI is selected based on the bug enumeration. Add bits
needed to enumerate BHI bug.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Newer processors supports a hardware control BHI_DIS_S to mitigate
Branch History Injection (BHI). Setting BHI_DIS_S protects the kernel
from userspace BHI attacks without having to manually overwrite the
branch history.
Define MSR_SPEC_CTRL bit BHI_DIS_S and its enumeration CPUID.BHI_CTRL.
Mitigation is enabled later.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Branch History Injection (BHI) attacks may allow a malicious application to
influence indirect branch prediction in kernel by poisoning the branch
history. eIBRS isolates indirect branch targets in ring0. The BHB can
still influence the choice of indirect branch predictor entry, and although
branch predictor entries are isolated between modes when eIBRS is enabled,
the BHB itself is not isolated between modes.
Alder Lake and new processors supports a hardware control BHI_DIS_S to
mitigate BHI. For older processors Intel has released a software sequence
to clear the branch history on parts that don't support BHI_DIS_S. Add
support to execute the software sequence at syscall entry and VMexit to
overwrite the branch history.
For now, branch history is not cleared at interrupt entry, as malicious
applications are not believed to have sufficient control over the
registers, since previous register state is cleared at interrupt
entry. Researchers continue to poke at this area and it may become
necessary to clear at interrupt entry as well in the future.
This mitigation is only defined here. It is enabled later.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Co-developed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Make <asm/syscall.h> build a switch statement instead, and the compiler can
either decide to generate an indirect jump, or - more likely these days due
to mitigations - just a series of conditional branches.
Yes, the conditional branches also have branch prediction, but the branch
prediction is much more controlled, in that it just causes speculatively
running the wrong system call (harmless), rather than speculatively running
possibly wrong random less controlled code gadgets.
This doesn't mitigate other indirect calls, but the system call indirection
is the first and most easily triggered case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Change the format of the 'spectre_v2' vulnerabilities sysfs file
slightly by converting the commas to semicolons, so that mitigations for
future variants can be grouped together and separated by commas.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Fix build errors in memblock tests:
- add stubs to functions that calls to them were recently added to
memblock but they were missing in tests
- update gfp_types.h to include bits.h so that BIT() definitions
won't depend on other includes"
* tag 'fixes-2024-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix undefined reference to `BIT'
memblock tests: fix undefined reference to `panic'
memblock tests: fix undefined reference to `early_pfn_to_nid'
|
|
All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change switch between non-VRR and VRR timings
generators on the fly, or even when sending the push to the
transcoder. For now just disable VRR when bigjoiner is needed.
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-6-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit f9d5e51db65652dbd8a2102fd7619440e3599fd2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change the timings at the same time. For
now just disable live M/N updates when bigjoiner is needed.
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-5-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ef79820db723a2a7c229a7251c12859e7e25a247)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The current modeset sequence can't handle port sync and bigjoiner
at the same time. Refuse port sync when bigjoiner is needed,
at least until we fix the modeset sequence.
v2: Add a FIXME (Vandite)
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-4-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit b37e1347b991459c38c56ec2476087854a4f720b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Bigjoiner seem to be causing all kinds of grief to the PSR
code currently. I don't believe there is any hardware issue
but the code simply not handling this correctly. For now
just disable PSR when bigjoiner is needed.
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-3-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.mruthy@intel.com>
Acked-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 372fa0c79d3f289f813d8001e0a8a96d1011826c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The previous fix for the circlular lock splat about the busyness
worker wasn't quite complete. Even though the reset-in-progress flag
is cleared at the start of intel_uc_reset_finish, the entire function
is still inside the reset mutex lock. Not sure why the patch appeared
to fix the issue both locally and in CI. However, it is now back
again.
There is a further complication that the wedge code path within
intel_gt_reset() jumps around so much that it results in nested
reset_prepare/_finish calls. That is, the call sequence is:
intel_gt_reset
| reset_prepare
| __intel_gt_set_wedged
| | reset_prepare
| | reset_finish
| reset_finish
The nested finish means that even if the clear of the in-progress flag
was moved to the end of _finish, it would still be clear for the
entire second call. Surprisingly, this does not seem to be causing any
other problems at present.
As an aside, a wedge on fini does not call the finish functions at
all. The reset_in_progress flag is left set (twice).
So instead of trying to cancel the worker anywhere at all in the reset
path, just add a cancel to intel_guc_submission_fini instead. Note
that it is not a problem if the worker is still active during a reset.
Either it will run before the reset path starts locking things and
will simply block the reset code for a tiny amount of time. Or it will
run after the locks have been acquired and will early exit due to the
try-lock.
Also, do not use the reset-in-progress flag to decide whether a
synchronous cancel is safe (from a lockdep perspective) or not.
Instead, use the actual reset mutex state (both the genuine one and
the custom rolled BACKOFF one).
Fixes: 0e00a8814eec ("drm/i915/guc: Avoid circular locking issue on busyness flush")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240329235306.1559639-1-John.C.Harrison@Intel.com
(cherry picked from commit 3563d855312acedcd445a3767f0cb07906f1c26f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
HDCP 1.x capability needs to be checked even if setup is not
HDCP 2.x capable.
--v2
-Assign hdcp_capable and hdcp2_capable to false [Chaitanya]
--v3
-Fix variable assignment [Chaitanya]
Fixes: 813cca96e4ac ("drm/i915/hdcp: Add new remote capability check shim function")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401055652.276785-2-suraj.kandpal@intel.com
(cherry picked from commit 6809f9246d43f7cb07310ca6a3deb7aa1c0ea938)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we only consider the relationship of the
old and new CDCLK frequencies when determining whether
to do the repgramming from intel_set_cdclk_pre_plane_update()
or intel_set_cdclk_post_plane_update().
It is technically possible to have a situation where the
CDCLK frequency is decreasing, but the voltage_level is
increasing due a DDI port. In this case we should bump
the voltage level already in intel_set_cdclk_pre_plane_update()
(so that the voltage_level will have been increased by the
time the port gets enabled), while leaving the CDCLK frequency
unchanged (as active planes/etc. may still depend on it).
We can then reduce the CDCLK frequency to its final value
from intel_set_cdclk_post_plane_update().
In order to handle that correctly we shall construct a
suitable amalgam of the old and new cdclk states in
intel_set_cdclk_pre_plane_update().
And we can simply call intel_set_cdclk() unconditionally
in both places as it will not do anything if nothing actually
changes vs. the current hw state.
v2: Handle cdclk_state->disable_pipes
v3: Only synchronize the cd2x update against the pipe's vblank
when the cdclk frequency is changing during the current
commit phase (Gustavo)
Cc: stable@vger.kernel.org
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com
(cherry picked from commit 34d127e2bdef73a923aa0dcd95cbc3257ad5af52)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we always reprogram CDCLK from the
intel_set_cdclk_pre_plane_update() when using squash/crawl.
The code only works correctly for the cd2x update or full
modeset cases, and it was simply never updated to deal with
squash/crawl.
If the CDCLK frequency is increasing we must reprogram it
before we do anything else that might depend on the new
higher frequency, and conversely we must not decrease
the frequency until everything that might still depend
on the old higher frequency has been dealt with.
Since cdclk_state->pipe is only relevant when doing a cd2x
update we can't use it to determine the correct sequence
during squash/crawl. To that end introduce cdclk_state->disable_pipes
which simply indicates that we must perform the update
while the pipes are disable (ie. during
intel_set_cdclk_pre_plane_update()). Otherwise we use the
same old vs. new CDCLK frequency comparsiong as for cd2x
updates.
The only remaining problem case is when the voltage_level
needs to increase due to a DDI port, but the CDCLK frequency
is decreasing (and not all pipes are being disabled). The
current approach will not bump the voltage level up until
after the port has already been enabled, which is too late.
But we'll take care of that case separately.
v2: Don't break the "must disable pipes case"
v3: Keep the on stack 'pipe' for future use
Cc: stable@vger.kernel.org
Fixes: d62686ba3b54 ("drm/i915/adl_p: CDCLK crawl support for ADL")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com
(cherry picked from commit 3aecee90ac12a351905f12dda7643d5b0676d6ca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
W=1 warns about null argument to kprintf:
warning: ‘%s’ directive argument is null [-Wformat-overflow=]
pr_info("product: %s year: %d\n", product, year);
Use "unknown" instead of NULL.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/33d40e976f08f82b9227d0ecae38c787fcc0c0b2.1712154684.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ACER Vivobook Flip (TP401NAS) virtual intel switch is implemented as
follow:
Device (VGBI)
{
Name (_HID, EisaId ("INT33D6") ...
Name (VBDS, Zero)
Method (_STA, 0, Serialized) // _STA: Status ...
Method (VBDL, 0, Serialized)
{
PB1E |= 0x20
VBDS |= 0x40
}
Method (VGBS, 0, Serialized)
{
Return (VBDS) /* \_SB_.PCI0.SBRG.EC0_.VGBI.VBDS */
}
...
}
By default VBDS is set to 0. At boot it is set to clamshell (bit 6 set)
only after method VBDL is executed.
Since VBDL is now evaluated in the probe routine later, after the device
is registered, the retrieved value of VBDS was still 0 ("tablet mode")
when setting up the virtual switch.
Make sure to evaluate VGBS after VBDL, to ensure the
convertible boots in clamshell mode, the expected default.
Fixes: 26173179fae1 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240329143206.2977734-3-gwendal@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The check for a device having virtual buttons is done using
acpi_has_method(..."VBDL"). Mimic that for checking virtual switch
presence.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240329143206.2977734-2-gwendal@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Stop logging unknown event / unknown keycode messages on suspend /
resume on a Toshiba Portege Z830:
1. The Toshiba Portege Z830 sends a 0x8e event when the power button
is pressed, ignore this.
2. The Toshiba Portege Z830 sends a 0xe00 hotkey event on resume from
suspend, ignore this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240402124351.167152-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
