Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-critical fixes from Olof Johansson:
 "As usual, we have a batch of fixes that weren't considered significant
  enough to warrant going into the later -rcs for previous release, so
  they are queued up on this branch.

  A handful of these are for various DT fixups for Samsung platforms,
  and a handful of other minor things.

  There are also a couple of stable-marked patches for mvebu -- they
  came in quite late and we decided to keep them deferred until the
  first -stable release to get more coverage instead of squeezing them
  into 3.13"

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  ARM: at91: smc: bug fix in sam9_smc_cs_read()
  i2c: mv64xxx: Document the newly introduced Armada XP A0 compatible
  i2c: mv64xxx: Fix bus hang on A0 version of the Armada XP SoCs
  ARM: mvebu: Add quirk for i2c for the OpenBlocks AX3-4 board
  ARM: mvebu: Add support to get the ID and the revision of a SoC
  ARM: dts: msm: Fix gpio interrupt and reg length
  irqchip: sirf: set IRQ_LEVEL status_flags
  ARM: OMAP2+: gpmc: Move legacy GPMC width setting
  ARM: OMAP2+: gpmc: Introduce gpmc_set_legacy()
  ARM: OMAP2+: gpmc: Move initialization outside the gpmc_t condition
  ARM: OMAP2+: board-generic: update SoC compatibility strings
  Documentation: dt: OMAP: explicitly state SoC compatible strings
  ARM: OMAP2+: enable AM33xx SOC EVM audio
  ARM: OMAP2+: Select USB PHY for AM335x SoC
  ARM: bcm2835: Fix grammar in help message
  ARM: msm: trout: fix uninit var warning
  ARM: dts: Use MSHC controller for eMMC memory for exynos4412-trats2
  ARM: dts: Fix definition of MSHC device tree nodes for exynos4x12
  ARM: dts: add clock provider for mshc node for Exynos4412 SOC
  clk: samsung: exynos4: Fix definition of div_mmc_pre4 divider
  ...

32 files changed, 381 insertions, 79 deletions

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 808c1543b0f87f..34dc40cffdfd8b 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -31,6 +31,59 @@ spinlock@1 {
     ti,hwmods = "spinlock";
 };
 
+SoC Type (optional):
+
+- General Purpose devices
+  compatible = "ti,gp"
+- High Security devices
+  compatible = "ti,hs"
+
+SoC Families:
+
+- OMAP2 generic - defaults to OMAP2420
+  compatible = "ti,omap2"
+- OMAP3 generic - defaults to OMAP3430
+  compatible = "ti,omap3"
+- OMAP4 generic - defaults to OMAP4430
+  compatible = "ti,omap4"
+- OMAP5 generic - defaults to OMAP5430
+  compatible = "ti,omap5"
+- DRA7 generic - defaults to DRA742
+  compatible = "ti,dra7"
+- AM43x generic - defaults to AM4372
+  compatible = "ti,am43"
+
+SoCs:
+
+- OMAP2420
+  compatible = "ti,omap2420", "ti,omap2"
+- OMAP2430
+  compatible = "ti,omap2430", "ti,omap2"
+
+- OMAP3430
+  compatible = "ti,omap3430", "ti,omap3"
+- AM3517
+  compatible = "ti,am3517", "ti,omap3"
+- OMAP3630
+  compatible = "ti,omap36xx", "ti,omap3"
+- AM33xx
+  compatible = "ti,am33xx", "ti,omap3"
+
+- OMAP4430
+  compatible = "ti,omap4430", "ti,omap4"
+- OMAP4460
+  compatible = "ti,omap4460", "ti,omap4"
+
+- OMAP5430
+  compatible = "ti,omap5430", "ti,omap5"
+- OMAP5432
+  compatible = "ti,omap5432", "ti,omap5"
+
+- DRA742
+  compatible = "ti,dra7xx", "ti,dra7"
+
+- AM4372
+  compatible = "ti,am4372", "ti,am43"
 
 Boards:
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index 82e8f6f17179b9..582b4652a82a98 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -5,7 +5,11 @@ Required properties :
 
  - reg             : Offset and length of the register set for the device
  - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
-                     or "marvell,mv78230-i2c"
+                     or "marvell,mv78230-i2c" or "marvell,mv78230-a0-i2c"
+                     Note: Only use "marvell,mv78230-a0-i2c" for a very rare,
+                     initial version of the SoC which had broken offload
+                     support.  Linux auto-detects this and sets it
+                     appropriately.
  - interrupts      : The interrupt number
 
 Optional properties :
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 1a12fb23767c52..2aa13cb3bbed00 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -313,7 +313,7 @@
 	display-timings {
 		native-mode = <&timing0>;
 		timing0: timing {
-			clock-frequency = <50000>;
+			clock-frequency = <47500000>;
 			hactive = <1024>;
 			vactive = <600>;
 			hfront-porch = <64>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 46c678ee119caa..8aad5f72ced79d 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -38,9 +38,7 @@
 		};
 	};
 
-	mshc@12550000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	mmc@12550000 {
 		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 		pinctrl-names = "default";
 		vmmc-supply = <&ldo20_reg &buck8_reg>;
@@ -49,7 +47,6 @@
 		num-slots = <1>;
 		supports-highspeed;
 		broken-cd;
-		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index d65984c440f678..6bc053924e9e69 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -122,9 +122,7 @@
 		status = "okay";
 	};
 
-	mshc@12550000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	mmc@12550000 {
 		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 		pinctrl-names = "default";
 		status = "okay";
@@ -132,7 +130,6 @@
 		num-slots = <1>;
 		supports-highspeed;
 		broken-cd;
-		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
@@ -159,7 +156,7 @@
 	display-timings {
 		native-mode = <&timing0>;
 		timing0: timing {
-			clock-frequency = <50000>;
+			clock-frequency = <47500000>;
 			hactive = <1024>;
 			vactive = <600>;
 			hfront-porch = <64>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index fb7b9ae5f39992..890ad275cb85b8 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -442,13 +442,25 @@
 		};
 	};
 
-	sdhci@12510000 {
-		bus-width = <8>;
+	mmc@12550000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
 		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
+		card-detect-delay = <200>;
 		vmmc-supply = <&vemmc_reg>;
+		clock-frequency = <400000000>;
+		samsung,dw-mshc-ciu-div = <0>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
 		status = "okay";
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
 	};
 
 	serial@13800000 {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index e743e677a9e242..85812bd95a86ed 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -61,11 +61,4 @@
 		};
 	};
 
-	mshc@12550000 {
-		compatible = "samsung,exynos4412-dw-mshc";
-		reg = <0x12550000 0x1000>;
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
 };
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index ad531fe6ab9528..1917c829e64e6e 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -28,6 +28,7 @@
 		pinctrl3 = &pinctrl_3;
 		fimc-lite0 = &fimc_lite_0;
 		fimc-lite1 = &fimc_lite_1;
+		mshc0 = &mshc_0;
 	};
 
 	pd_isp: isp-power-domain@10023CA0 {
@@ -176,4 +177,16 @@
 			};
 		};
 	};
+
+	mshc_0: mmc@12550000 {
+		compatible = "samsung,exynos4412-dw-mshc";
+		reg = <0x12550000 0x1000>;
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		fifo-depth = <0x80>;
+		clocks = <&clock 301>, <&clock 149>;
+		clock-names = "biu", "ciu";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 684527087aa4cc..bbfb23f942e181 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -302,11 +302,13 @@
 				buck7_reg: BUCK7 {
 					regulator-name = "PVDD_BUCK7";
 					regulator-always-on;
+					op_mode = <1>;
 				};
 
 				buck8_reg: BUCK8 {
 					regulator-name = "PVDD_BUCK8";
 					regulator-always-on;
+					op_mode = <1>;
 				};
 
 				buck9_reg: BUCK9 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index fd711e245e8d31..c65f52a6dcea56 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -85,7 +85,7 @@
 				        keypad,num-rows = <8>;
 				        keypad,num-columns = <13>;
 				        google,needs-ghost-filter;
-					linux,keymap = <0x0001003a	/* CAPSLK */
+					linux,keymap = <0x0001007d	/* L_META */
 							0x0002003b	/* F1 */
 							0x00030030	/* B */
 							0x00040044	/* F10 */
@@ -130,6 +130,7 @@
 							0x04060024	/* J */
 							0x04080027	/* ; */
 							0x04090026	/* L */
+							0x040a002b	/* \ */
 							0x040b001c	/* ENTER */
 
 							0x0501002c	/* Z */
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 177becde7a268b..6feaa1c454fae8 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -60,11 +60,13 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+			clock-frequency = <1700000000>;
 		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
+			clock-frequency = <1700000000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index e695aba5f73c4d..e62c8eb5743898 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -64,7 +64,7 @@
 			samsung,pins = "gpx0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 386d4287021534..1187185cf25bb2 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -28,11 +28,11 @@
 
 	msmgpio: gpio@800000 {
 		compatible = "qcom,msm-gpio";
-		reg = <0x00800000 0x1000>;
+		reg = <0x00800000 0x4000>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ngpio = <173>;
-		interrupts = <0 32 0x4>;
+		interrupts = <0 16 0x4>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 93e9f7e0b7ad22..6ccbac77931e21 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -31,7 +31,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		ngpio = <150>;
-		interrupts = <0 32 0x4>;
+		interrupts = <0 16 0x4>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		reg = <0x800000 0x4000>;
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 8a1032c1ffc9fd..a9da4800daf0ed 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -307,7 +307,7 @@
 		clocks = <&i2c0_clk>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		ab3100: ab3100@0x48 {
+		ab3100: ab3100@48 {
 			compatible = "stericsson,ab3100";
 			reg = <0x48>;
 			interrupt-parent = <&vica>;
@@ -385,10 +385,10 @@
 		clocks = <&i2c1_clk>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		fwcam0: fwcam@0x10 {
+		fwcam0: fwcam@10 {
 			reg = <0x10>;
 		};
-		fwcam1: fwcam@0x5d {
+		fwcam1: fwcam@5d {
 			reg = <0x5d>;
 		};
 	};
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index bfa80a11e8c763..3a0b53d225e709 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -208,6 +208,8 @@ CONFIG_SND_DEBUG=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_AM33XX_SOC_EVM=m
+CONFIG_SND_DAVINCI_SOC=m
 CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
 CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
@@ -222,6 +224,7 @@ CONFIG_USB_TEST=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_OMAP_USB2=y
 CONFIG_OMAP_USB3=y
+CONFIG_AM335X_PHY_USB=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index 99a0a1d2b7dce8..b26156bf15db48 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -101,7 +101,7 @@ static void sam9_smc_cs_read(void __iomem *base,
 	/* Pulse register */
 	val = __raw_readl(base + AT91_SMC_PULSE);
 
-	config->nwe_setup = val & AT91_SMC_NWEPULSE;
+	config->nwe_pulse = val & AT91_SMC_NWEPULSE;
 	config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
 	config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
 	config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
index 560045cafc3417..d1f9612f8c1544 100644
--- a/arch/arm/mach-bcm2835/Kconfig
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -12,4 +12,4 @@ config ARCH_BCM2835
 	select PINCTRL_BCM2835
 	help
 	  This enables support for the Broadcom BCM2835 SoC. This SoC is
-	  use in the Raspberry Pi, and Roku 2 devices.
+	  used in the Raspberry Pi and Roku 2 devices.
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index ccf6621bc664e4..015d544aa01791 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -13,6 +13,7 @@
  * GNU General Public License for more details.
  *
  */
+#define pr_fmt(fmt) "%s: " fmt, __func__
 
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -68,12 +69,11 @@ static void __init trout_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-#ifdef CONFIG_MMC
-        rc = trout_init_mmc(system_rev);
-        if (rc)
-                printk(KERN_CRIT "%s: MMC init failure (%d)\n", __func__, rc);
-#endif
-
+	if (IS_ENABLED(CONFIG_MMC)) {
+		rc = trout_init_mmc(system_rev);
+		if (rc)
+			pr_crit("MMC init failure (%d)\n", rc);
+	}
 }
 
 static struct map_desc trout_io_desc[] __initdata = {
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 2d04f0e218703e..878aebe98dcc81 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -3,7 +3,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 
 AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
 
-obj-y				 += system-controller.o
+obj-y				 += system-controller.o mvebu-soc-id.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
 obj-$(CONFIG_ARCH_MVEBU)	 += coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index e2acff98e750a0..f6c9d1d85c1427 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -21,6 +21,7 @@
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/mbus.h>
+#include <linux/slab.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -28,6 +29,7 @@
 #include "armada-370-xp.h"
 #include "common.h"
 #include "coherency.h"
+#include "mvebu-soc-id.h"
 
 static void __init armada_370_xp_map_io(void)
 {
@@ -45,8 +47,38 @@ static void __init armada_370_xp_timer_and_clk_init(void)
 #endif
 }
 
+static void __init i2c_quirk(void)
+{
+	struct device_node *np;
+	u32 dev, rev;
+
+	/*
+	 * Only revisons more recent than A0 support the offload
+	 * mechanism. We can exit only if we are sure that we can
+	 * get the SoC revision and it is more recent than A0.
+	 */
+	if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV)
+		return;
+
+	for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
+		struct property *new_compat;
+
+		new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);
+
+		new_compat->name = kstrdup("compatible", GFP_KERNEL);
+		new_compat->length = sizeof("marvell,mv78230-a0-i2c");
+		new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
+						GFP_KERNEL);
+
+		of_update_property(np, new_compat);
+	}
+	return;
+}
+
 static void __init armada_370_xp_dt_init(void)
 {
+	if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
+		i2c_quirk();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
new file mode 100644
index 00000000000000..fe4fc1cbdfaf4f
--- /dev/null
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -0,0 +1,119 @@
+/*
+ * ID and revision information for mvebu SoCs
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * All the mvebu SoCs have information related to their variant and
+ * revision that can be read from the PCI control register. This is
+ * done before the PCI initialization to avoid any conflict. Once the
+ * ID and revision are retrieved, the mapping is freed.
+ */
+
+#define pr_fmt(fmt) "mvebu-soc-id: " fmt
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include "mvebu-soc-id.h"
+
+#define PCIE_DEV_ID_OFF		0x0
+#define PCIE_DEV_REV_OFF	0x8
+
+#define SOC_ID_MASK	    0xFFFF0000
+#define SOC_REV_MASK	    0xFF
+
+static u32 soc_dev_id;
+static u32 soc_rev;
+static bool is_id_valid;
+
+static const struct of_device_id mvebu_pcie_of_match_table[] = {
+	{ .compatible = "marvell,armada-xp-pcie", },
+	{ .compatible = "marvell,armada-370-pcie", },
+	{},
+};
+
+int mvebu_get_soc_id(u32 *dev, u32 *rev)
+{
+	if (is_id_valid) {
+		*dev = soc_dev_id;
+		*rev = soc_rev;
+		return 0;
+	} else
+		return -1;
+}
+
+static int __init mvebu_soc_id_init(void)
+{
+	struct device_node *np;
+	int ret = 0;
+	void __iomem *pci_base;
+	struct clk *clk;
+	struct device_node *child;
+
+	np = of_find_matching_node(NULL, mvebu_pcie_of_match_table);
+	if (!np)
+		return ret;
+
+	/*
+	 * ID and revision are available from any port, so we
+	 * just pick the first one
+	 */
+	child = of_get_next_child(np, NULL);
+	if (child == NULL) {
+		pr_err("cannot get pci node\n");
+		ret = -ENOMEM;
+		goto clk_err;
+	}
+
+	clk = of_clk_get_by_name(child, NULL);
+	if (IS_ERR(clk)) {
+		pr_err("cannot get clock\n");
+		ret = -ENOMEM;
+		goto clk_err;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("cannot enable clock\n");
+		goto clk_err;
+	}
+
+	pci_base = of_iomap(child, 0);
+	if (IS_ERR(pci_base)) {
+		pr_err("cannot map registers\n");
+		ret = -ENOMEM;
+		goto res_ioremap;
+	}
+
+	/* SoC ID */
+	soc_dev_id = readl(pci_base + PCIE_DEV_ID_OFF) >> 16;
+
+	/* SoC revision */
+	soc_rev = readl(pci_base + PCIE_DEV_REV_OFF) & SOC_REV_MASK;
+
+	is_id_valid = true;
+
+	pr_info("MVEBU SoC ID=0x%X, Rev=0x%X\n", soc_dev_id, soc_rev);
+
+	iounmap(pci_base);
+
+res_ioremap:
+	clk_disable_unprepare(clk);
+
+clk_err:
+	of_node_put(child);
+	of_node_put(np);
+
+	return ret;
+}
+core_initcall(mvebu_soc_id_init);
+
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h
new file mode 100644
index 00000000000000..31654252fe35ca
--- /dev/null
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.h
@@ -0,0 +1,32 @@
+/*
+ * Marvell EBU SoC ID and revision definitions.
+ *
+ * Copyright (C) 2014 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_MVEBU_SOC_ID_H
+#define __LINUX_MVEBU_SOC_ID_H
+
+/* Armada XP ID */
+#define MV78230_DEV_ID	    0x7823
+#define MV78260_DEV_ID	    0x7826
+#define MV78460_DEV_ID	    0x7846
+
+/* Armada XP Revision */
+#define MV78XX0_A0_REV	    0x1
+#define MV78XX0_B0_REV	    0x2
+
+#ifdef CONFIG_ARCH_MVEBU
+int mvebu_get_soc_id(u32 *dev, u32 *rev);
+#else
+static inline int mvebu_get_soc_id(u32 *dev, u32 *rev)
+{
+	return -1;
+}
+#endif
+
+#endif /* __LINUX_MVEBU_SOC_ID_H */
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 8d972ff18c5611..8e3daa11602b30 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -78,6 +78,7 @@ MACHINE_END
 
 #ifdef CONFIG_ARCH_OMAP3
 static const char *omap3_boards_compat[] __initdata = {
+	"ti,omap3430",
 	"ti,omap3",
 	NULL,
 };
@@ -173,6 +174,8 @@ MACHINE_END
 
 #ifdef CONFIG_ARCH_OMAP4
 static const char *omap4_boards_compat[] __initdata = {
+	"ti,omap4460",
+	"ti,omap4430",
 	"ti,omap4",
 	NULL,
 };
@@ -193,6 +196,8 @@ MACHINE_END
 
 #ifdef CONFIG_SOC_OMAP5
 static const char *omap5_boards_compat[] __initdata = {
+	"ti,omap5432",
+	"ti,omap5430",
 	"ti,omap5",
 	NULL,
 };
@@ -213,6 +218,7 @@ MACHINE_END
 
 #ifdef CONFIG_SOC_AM43XX
 static const char *am43_boards_compat[] __initdata = {
+	"ti,am4372",
 	"ti,am43",
 	NULL,
 };
@@ -230,6 +236,7 @@ MACHINE_END
 
 #ifdef CONFIG_SOC_DRA7XX
 static const char *dra7xx_boards_compat[] __initdata = {
+	"ti,dra7xx",
 	"ti,dra7",
 	NULL,
 };
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 662c7fd633ccf3..174caecc3186cb 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -65,6 +65,22 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 	return 1;
 }
 
+/* This function will go away once the device-tree convertion is complete */
+static void gpmc_set_legacy(struct omap_nand_platform_data *gpmc_nand_data,
+			    struct gpmc_settings *s)
+{
+	/* Enable RD PIN Monitoring Reg */
+	if (gpmc_nand_data->dev_ready) {
+		s->wait_on_read = true;
+		s->wait_on_write = true;
+	}
+
+	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
+		s->device_width = GPMC_DEVWIDTH_16BIT;
+	else
+		s->device_width = GPMC_DEVWIDTH_8BIT;
+}
+
 int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 		   struct gpmc_timings *gpmc_t)
 {
@@ -98,32 +114,22 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 			dev_err(dev, "Unable to set gpmc timings: %d\n", err);
 			return err;
 		}
+	}
 
-		if (gpmc_nand_data->of_node) {
-			gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
-		} else {
-			/* Enable RD PIN Monitoring Reg */
-			if (gpmc_nand_data->dev_ready) {
-				s.wait_on_read = true;
-				s.wait_on_write = true;
-			}
-		}
-
-		s.device_nand = true;
+	if (gpmc_nand_data->of_node)
+		gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
+	else
+		gpmc_set_legacy(gpmc_nand_data, &s);
 
-		if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
-			s.device_width = GPMC_DEVWIDTH_16BIT;
-		else
-			s.device_width = GPMC_DEVWIDTH_8BIT;
+	s.device_nand = true;
 
-		err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
-		if (err < 0)
-			goto out_free_cs;
+	err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
+	if (err < 0)
+		goto out_free_cs;
 
-		err = gpmc_configure(GPMC_CONFIG_WP, 0);
-		if (err < 0)
-			goto out_free_cs;
-	}
+	err = gpmc_configure(GPMC_CONFIG_WP, 0);
+	if (err < 0)
+		goto out_free_cs;
 
 	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
 
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 8c84d3448dac2c..8d553a418e1c90 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -37,7 +37,9 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
 #include <plat/regs-serial.h>
+#include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <video/platform_lcd.h>
@@ -215,6 +217,13 @@ static struct platform_device mini6410_lcd_powerdev = {
 	.dev.platform_data	= &mini6410_lcd_power_data,
 };
 
+static struct s3c_sdhci_platdata mini6410_hsmmc1_pdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S3C64XX_GPN(10),
+	.ext_cd_gpio_invert	= true,
+};
+
 static struct platform_device *mini6410_devices[] __initdata = {
 	&mini6410_device_eth,
 	&s3c_device_hsmmc0,
@@ -322,6 +331,7 @@ static void __init mini6410_machine_init(void)
 
 	s3c_nand_set_platdata(&mini6410_nand_info);
 	s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
+	s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
 	s3c24xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
index bf40cd478fe95d..0493a845b6bc59 100644
--- a/arch/arm/mach-u300/regulator.c
+++ b/arch/arm/mach-u300/regulator.c
@@ -69,9 +69,9 @@ static int __init __u300_init_boardpower(struct platform_device *pdev)
 		return -ENODEV;
 	}
 	regmap = syscon_node_to_regmap(syscon_np);
-	if (!regmap) {
+	if (IS_ERR(regmap)) {
 		pr_crit("U300: could not locate syscon regmap\n");
-		return -ENODEV;
+		return PTR_ERR(regmap);
 	}
 
 	main_power_15 = regulator_get(&pdev->dev, "vana15");
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 9a5f9fb352ce1c..5226162fac69e4 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -184,11 +184,13 @@
 #define U300_TIMER_APP_CRC					(0x100)
 #define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE			(0x00000001)
 
-#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
-#define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
-
 static void __iomem *u300_timer_base;
 
+struct u300_clockevent_data {
+	struct clock_event_device cevd;
+	unsigned ticks_per_jiffy;
+};
+
 /*
  * The u300_set_mode() function is always called first, if we
  * have oneshot timer active, the oneshot scheduling function
@@ -197,6 +199,9 @@ static void __iomem *u300_timer_base;
 static void u300_set_mode(enum clock_event_mode mode,
 			  struct clock_event_device *evt)
 {
+	struct u300_clockevent_data *cevdata =
+		container_of(evt, struct u300_clockevent_data, cevd);
+
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		/* Disable interrupts on GPT1 */
@@ -209,7 +214,7 @@ static void u300_set_mode(enum clock_event_mode mode,
 		 * Set the periodic mode to a certain number of ticks per
 		 * jiffy.
 		 */
-		writel(TICKS_PER_JIFFY,
+		writel(cevdata->ticks_per_jiffy,
 		       u300_timer_base + U300_TIMER_APP_GPT1TC);
 		/*
 		 * Set continuous mode, so the timer keeps triggering
@@ -305,20 +310,23 @@ static int u300_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-
-/* Use general purpose timer 1 as clock event */
-static struct clock_event_device clockevent_u300_1mhz = {
-	.name		= "GPT1",
-	.rating		= 300, /* Reasonably fast and accurate clock event */
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= u300_set_next_event,
-	.set_mode	= u300_set_mode,
+static struct u300_clockevent_data u300_clockevent_data = {
+	/* Use general purpose timer 1 as clock event */
+	.cevd = {
+		.name		= "GPT1",
+		/* Reasonably fast and accurate clock event */
+		.rating		= 300,
+		.features	= CLOCK_EVT_FEAT_PERIODIC |
+			CLOCK_EVT_FEAT_ONESHOT,
+		.set_next_event	= u300_set_next_event,
+		.set_mode	= u300_set_mode,
+	},
 };
 
 /* Clock event timer interrupt handler */
 static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &clockevent_u300_1mhz;
+	struct clock_event_device *evt = &u300_clockevent_data.cevd;
 	/* ACK/Clear timer IRQ for the APP GPT1 Timer */
 
 	writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
@@ -379,6 +387,8 @@ static void __init u300_timer_init_of(struct device_node *np)
 	clk_prepare_enable(clk);
 	rate = clk_get_rate(clk);
 
+	u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
+
 	setup_sched_clock(u300_read_sched_clock, 32, rate);
 
 	u300_delay_timer.read_current_timer = &u300_read_current_timer;
@@ -428,7 +438,7 @@ static void __init u300_timer_init_of(struct device_node *np)
 		pr_err("timer: failed to initialize U300 clock source\n");
 
 	/* Configure and register the clockevent */
-	clockevents_config_and_register(&clockevent_u300_1mhz, rate,
+	clockevents_config_and_register(&u300_clockevent_data.cevd, rate,
 					1, 0xffffffff);
 
 	/*
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index 4afc32f90b6d51..f48dc0a4736c8d 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -145,6 +145,8 @@ static inline void arch_enable_uart_fifo(void)
 			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
 				break;
 		}
+
+		uart_wr(S3C2410_UFCON, S3C2410_UFCON_FIFOMODE);
 	}
 }
 #else
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 1a7c1b929c690b..3852e44db0f83e 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -530,7 +530,8 @@ static struct samsung_div_clock exynos4_div_clks[] __initdata = {
 	DIV(sclk_i2s1, "sclk_i2s1", "sclk_audio1", DIV_PERIL5, 0, 6),
 	DIV(sclk_i2s2, "sclk_i2s2", "sclk_audio2", DIV_PERIL5, 8, 6),
 	DIV(none, "div_mmc4", "mout_mmc4", DIV_FSYS3, 0, 4),
-	DIV(none, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8),
+	DIV_F(none, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8,
+			CLK_SET_RATE_PARENT, 0),
 	DIV(none, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
 	DIV(none, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
 	DIV(none, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 8be7e42aa4de88..b8c5187b9ee0da 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -692,6 +692,7 @@ static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
 	{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
 	{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
 	{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+	{ .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
 	{}
 };
 MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
@@ -783,6 +784,10 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 		drv_data->errata_delay = true;
 	}
 
+	if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
+		drv_data->offload_enabled = false;
+		drv_data->errata_delay = true;
+	}
 out:
 	return rc;
 #endif
diff --git a/drivers/irqchip/irq-sirfsoc.c b/drivers/irqchip/irq-sirfsoc.c
index 4851afae38dcbb..3a070c587ed969 100644
--- a/drivers/irqchip/irq-sirfsoc.c
+++ b/drivers/irqchip/irq-sirfsoc.c
@@ -34,9 +34,10 @@ sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 	struct irq_chip_type *ct;
 	int ret;
 	unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+	unsigned int set = IRQ_LEVEL;
 
 	ret = irq_alloc_domain_generic_chips(sirfsoc_irqdomain, num, 1, "irq_sirfsoc",
-		handle_level_irq, clr, 0, IRQ_GC_INIT_MASK_CACHE);
+		handle_level_irq, clr, set, IRQ_GC_INIT_MASK_CACHE);
 
 	gc = irq_get_domain_generic_chip(sirfsoc_irqdomain, irq_start);
 	gc->reg_base = base;