Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net into intel

Jeff Kirsher says:

===================
This series contains fixes to e1000e and igb.

The e1000e fix resolves an issue at 1000Mbps link speed, where one of the
MAC's internal clocks can be stopped for up to 4us when entering K1 (a
power mode of the MAC-PHY interconnect).  If the MAC is waiting for
completion indications for 2 DMA write requests into Host memory
(e.g. descriptor writeback or Rx packet writing) and the
indications occur while the clock is stopped, both indications will be
missed by the MAC causing the MAC to wait for the completion indications
and be unable to generate further DMA write requests.  This results in an
apparent hardware hang.  The patch works-around the issue by disabling
the de-assertion of the clock request when 1000Mbps link is acquired (K1
must be disabled while doing this).

The igb fix to drop BUILD_BUG_ON check from igb_build_rx_buffer resolves
a build error on s390 devices.  The igb driver was throwing a build error
due to the fact that a frame built using build_skb would be larger than 2K.
Since this is not likely to change at any point in the future we are better
off just dropping the check since we already had a check in
igb_set_rx_buffer_len that will just disable the usage of build_skb anyway.

The igb fix for i210 link setup changes the setup copper link function
to use a switch statement, so that the appropriate setup link function
is called for the given PHY types.

Lastly, the igb fix for a lockdep issue in igb_get_i2c_client resolves
the issue by re-factoring the initialization and usage of the i2c_client.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 98 insertions, 79 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index dff7bff8b8e0f1..121a865c7fbd12 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -782,6 +782,59 @@ release:
 }
 
 /**
+ *  e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP
+ *  @hw:   pointer to the HW structure
+ *  @link: link up bool flag
+ *
+ *  When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications
+ *  preventing further DMA write requests.  Workaround the issue by disabling
+ *  the de-assertion of the clock request when in 1Gpbs mode.
+ **/
+static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link)
+{
+	u32 fextnvm6 = er32(FEXTNVM6);
+	s32 ret_val = 0;
+
+	if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) {
+		u16 kmrn_reg;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val)
+			return ret_val;
+
+		ret_val =
+		    e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+						&kmrn_reg);
+		if (ret_val)
+			goto release;
+
+		ret_val =
+		    e1000e_write_kmrn_reg_locked(hw,
+						 E1000_KMRNCTRLSTA_K1_CONFIG,
+						 kmrn_reg &
+						 ~E1000_KMRNCTRLSTA_K1_ENABLE);
+		if (ret_val)
+			goto release;
+
+		usleep_range(10, 20);
+
+		ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK);
+
+		ret_val =
+		    e1000e_write_kmrn_reg_locked(hw,
+						 E1000_KMRNCTRLSTA_K1_CONFIG,
+						 kmrn_reg);
+release:
+		hw->phy.ops.release(hw);
+	} else {
+		/* clear FEXTNVM6 bit 8 on link down or 10/100 */
+		ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+	}
+
+	return ret_val;
+}
+
+/**
  *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
  *  @hw: pointer to the HW structure
  *
@@ -818,6 +871,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 			return ret_val;
 	}
 
+	/* Work-around I218 hang issue */
+	if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+	    (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+		ret_val = e1000_k1_workaround_lpt_lp(hw, link);
+		if (ret_val)
+			return ret_val;
+	}
+
 	/* Clear link partner's EEE ability */
 	hw->dev_spec.ich8lan.eee_lp_ability = 0;
 
@@ -3954,8 +4015,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
 
 	phy_ctrl = er32(PHY_CTRL);
 	phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;
+
 	if (hw->phy.type == e1000_phy_i217) {
-		u16 phy_reg;
+		u16 phy_reg, device_id = hw->adapter->pdev->device;
+
+		if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+		    (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+			u32 fextnvm6 = er32(FEXTNVM6);
+
+			ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+		}
 
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index b6d3174d7d2d73..8bf4655c2e17f2 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -92,6 +92,8 @@
 #define E1000_FEXTNVM4_BEACON_DURATION_8USEC	0x7
 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC	0x3
 
+#define E1000_FEXTNVM6_REQ_PLL_CLK	0x00000100
+
 #define PCIE_ICH8_SNOOP_ALL	PCIE_NO_SNOOP_ALL
 
 #define E1000_ICH_RAR_ENTRIES	7
diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h
index 794fe149766670..a7e6a3e37257b3 100644
--- a/drivers/net/ethernet/intel/e1000e/regs.h
+++ b/drivers/net/ethernet/intel/e1000e/regs.h
@@ -42,6 +42,7 @@
 #define E1000_FEXTNVM	0x00028	/* Future Extended NVM - RW */
 #define E1000_FEXTNVM3	0x0003C	/* Future Extended NVM 3 - RW */
 #define E1000_FEXTNVM4	0x00024	/* Future Extended NVM 4 - RW */
+#define E1000_FEXTNVM6	0x00010	/* Future Extended NVM 6 - RW */
 #define E1000_FEXTNVM7	0x000E4	/* Future Extended NVM 7 - RW */
 #define E1000_FCT	0x00030	/* Flow Control Type - RW */
 #define E1000_VET	0x00038	/* VLAN Ether Type - RW */
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 84e7e0909def4b..b64542acfa3449 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -1361,11 +1361,16 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
 	switch (hw->phy.type) {
 	case e1000_phy_i210:
 	case e1000_phy_m88:
-		if (hw->phy.id == I347AT4_E_PHY_ID ||
-		    hw->phy.id == M88E1112_E_PHY_ID)
+		switch (hw->phy.id) {
+		case I347AT4_E_PHY_ID:
+		case M88E1112_E_PHY_ID:
+		case I210_I_PHY_ID:
 			ret_val = igb_copper_link_setup_m88_gen2(hw);
-		else
+			break;
+		default:
 			ret_val = igb_copper_link_setup_m88(hw);
+			break;
+		}
 		break;
 	case e1000_phy_igp_3:
 		ret_val = igb_copper_link_setup_igp(hw);
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index d27edbc63923a2..25151401c2abe5 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -447,7 +447,7 @@ struct igb_adapter {
 #endif
 	struct i2c_algo_bit_data i2c_algo;
 	struct i2c_adapter i2c_adap;
-	struct igb_i2c_client_list *i2c_clients;
+	struct i2c_client *i2c_client;
 };
 
 #define IGB_FLAG_HAS_MSI		(1 << 0)
diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c
index 0a9b073d0b033e..4623502054d534 100644
--- a/drivers/net/ethernet/intel/igb/igb_hwmon.c
+++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c
@@ -39,6 +39,10 @@
 #include <linux/pci.h>
 
 #ifdef CONFIG_IGB_HWMON
+struct i2c_board_info i350_sensor_info = {
+	I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)),
+};
+
 /* hwmon callback functions */
 static ssize_t igb_hwmon_show_location(struct device *dev,
 					 struct device_attribute *attr,
@@ -188,6 +192,7 @@ int igb_sysfs_init(struct igb_adapter *adapter)
 	unsigned int i;
 	int n_attrs;
 	int rc = 0;
+	struct i2c_client *client = NULL;
 
 	/* If this method isn't defined we don't support thermals */
 	if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
@@ -198,6 +203,15 @@ int igb_sysfs_init(struct igb_adapter *adapter)
 		if (rc)
 			goto exit;
 
+	/* init i2c_client */
+	client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info);
+	if (client == NULL) {
+		dev_info(&adapter->pdev->dev,
+			"Failed to create new i2c device..\n");
+		goto exit;
+	}
+	adapter->i2c_client = client;
+
 	/* Allocation space for max attributes
 	 * max num sensors * values (loc, temp, max, caution)
 	 */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ed79a1c53b59b0..4dbd62968c7a18 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1923,10 +1923,6 @@ void igb_set_fw_version(struct igb_adapter *adapter)
 	return;
 }
 
-static const struct i2c_board_info i350_sensor_info = {
-	I2C_BOARD_INFO("i350bb", 0Xf8),
-};
-
 /*  igb_init_i2c - Init I2C interface
  *  @adapter: pointer to adapter structure
  *
@@ -6227,13 +6223,6 @@ static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring,
 	/* If we spanned a buffer we have a huge mess so test for it */
 	BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)));
 
-	/* Guarantee this function can be used by verifying buffer sizes */
-	BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD +
-							NET_IP_ALIGN +
-							IGB_TS_HDR_LEN +
-							ETH_FRAME_LEN +
-							ETH_FCS_LEN));
-
 	rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
 	page = rx_buffer->page;
 	prefetchw(page);
@@ -7724,67 +7713,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
 	}
 }
 
-static DEFINE_SPINLOCK(i2c_clients_lock);
-
-/*  igb_get_i2c_client - returns matching client
- *  in adapters's client list.
- *  @adapter: adapter struct
- *  @dev_addr: device address of i2c needed.
- */
-static struct i2c_client *
-igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr)
-{
-	ulong flags;
-	struct igb_i2c_client_list *client_list;
-	struct i2c_client *client = NULL;
-	struct i2c_board_info client_info = {
-		I2C_BOARD_INFO("igb", 0x00),
-	};
-
-	spin_lock_irqsave(&i2c_clients_lock, flags);
-	client_list = adapter->i2c_clients;
-
-	/* See if we already have an i2c_client */
-	while (client_list) {
-		if (client_list->client->addr == (dev_addr >> 1)) {
-			client = client_list->client;
-			goto exit;
-		} else {
-			client_list = client_list->next;
-		}
-	}
-
-	/* no client_list found, create a new one */
-	client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC);
-	if (client_list == NULL)
-		goto exit;
-
-	/* dev_addr passed to us is left-shifted by 1 bit
-	 * i2c_new_device call expects it to be flush to the right.
-	 */
-	client_info.addr = dev_addr >> 1;
-	client_info.platform_data = adapter;
-	client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
-	if (client_list->client == NULL) {
-		dev_info(&adapter->pdev->dev,
-			"Failed to create new i2c device..\n");
-		goto err_no_client;
-	}
-
-	/* insert new client at head of list */
-	client_list->next = adapter->i2c_clients;
-	adapter->i2c_clients = client_list;
-
-	client = client_list->client;
-	goto exit;
-
-err_no_client:
-	kfree(client_list);
-exit:
-	spin_unlock_irqrestore(&i2c_clients_lock, flags);
-	return client;
-}
-
 /*  igb_read_i2c_byte - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
@@ -7798,7 +7726,7 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
 				u8 dev_addr, u8 *data)
 {
 	struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
-	struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+	struct i2c_client *this_client = adapter->i2c_client;
 	s32 status;
 	u16 swfw_mask = 0;
 
@@ -7835,7 +7763,7 @@ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
 				 u8 dev_addr, u8 data)
 {
 	struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
-	struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+	struct i2c_client *this_client = adapter->i2c_client;
 	s32 status;
 	u16 swfw_mask = E1000_SWFW_PHY0_SM;