Merge tag 'usb-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for reported
  problems. Included in here are:

   - thunderbolt driver memory leak fix

   - thunderbolt display flicker fix

   - usb dwc3 driver fix

   - usb gadget uvc disconnect crash fix

   - usb typec Kconfig build dependency fix

   - usb typec small fixes

   - usb-con-gpio bugfix

   - usb-storage old driver bugfix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request()
  usb: dwc3: Properly handle processing of pending events
  usb-storage: alauda: Fix uninit-value in alauda_check_media()
  usb: common: usb-conn-gpio: Prevent bailing out if initial role is none
  USB: Gadget: core: Help prevent panic during UVC unconfigure
  usb: typec: mux: intel: Add dependency on USB_COMMON
  usb: typec: nb7vpq904m: Add an error handling path in nb7vpq904m_probe()
  usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment
  usb: typec: tcpm: Fix response to vsafe0V event
  thunderbolt: Fix Thunderbolt 3 display flickering issue on 2nd hot plug onwards

10 files changed, 79 insertions, 14 deletions

diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 62b26b7998fd88..3fb4553a6442b4 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -1964,6 +1964,8 @@ unlock:
 
 	pm_runtime_mark_last_busy(&tb->dev);
 	pm_runtime_put_autosuspend(&tb->dev);
+
+	kfree(ev);
 }
 
 static void tb_queue_dp_bandwidth_request(struct tb *tb, u64 route, u8 port)
diff --git a/drivers/thunderbolt/tmu.c b/drivers/thunderbolt/tmu.c
index 1269f417515bbc..0dfd1e083994e6 100644
--- a/drivers/thunderbolt/tmu.c
+++ b/drivers/thunderbolt/tmu.c
@@ -579,7 +579,9 @@ int tb_switch_tmu_disable(struct tb_switch *sw)
 		 * uni-directional mode and we don't want to change it's TMU
 		 * mode.
 		 */
-		tb_switch_tmu_rate_write(sw, tmu_rates[TB_SWITCH_TMU_MODE_OFF]);
+		ret = tb_switch_tmu_rate_write(sw, tmu_rates[TB_SWITCH_TMU_MODE_OFF]);
+		if (ret)
+			return ret;
 
 		tb_port_tmu_time_sync_disable(up);
 		ret = tb_port_tmu_time_sync_disable(down);
diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
index 766005d20baefd..501e8bc9738eba 100644
--- a/drivers/usb/common/usb-conn-gpio.c
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -42,6 +42,7 @@ struct usb_conn_info {
 
 	struct power_supply_desc desc;
 	struct power_supply *charger;
+	bool initial_detection;
 };
 
 /*
@@ -86,11 +87,13 @@ static void usb_conn_detect_cable(struct work_struct *work)
 	dev_dbg(info->dev, "role %s -> %s, gpios: id %d, vbus %d\n",
 		usb_role_string(info->last_role), usb_role_string(role), id, vbus);
 
-	if (info->last_role == role) {
+	if (!info->initial_detection && info->last_role == role) {
 		dev_warn(info->dev, "repeated role: %s\n", usb_role_string(role));
 		return;
 	}
 
+	info->initial_detection = false;
+
 	if (info->last_role == USB_ROLE_HOST && info->vbus)
 		regulator_disable(info->vbus);
 
@@ -258,6 +261,7 @@ static int usb_conn_probe(struct platform_device *pdev)
 	device_set_wakeup_capable(&pdev->dev, true);
 
 	/* Perform initial detection */
+	info->initial_detection = true;
 	usb_conn_queue_dwork(info, 0);
 
 	return 0;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 5fd067151fbf57..858fe4c299b7af 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4455,9 +4455,14 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt)
 	u32 count;
 
 	if (pm_runtime_suspended(dwc->dev)) {
+		dwc->pending_events = true;
+		/*
+		 * Trigger runtime resume. The get() function will be balanced
+		 * after processing the pending events in dwc3_process_pending
+		 * events().
+		 */
 		pm_runtime_get(dwc->dev);
 		disable_irq_nosync(dwc->irq_gadget);
-		dwc->pending_events = true;
 		return IRQ_HANDLED;
 	}
 
@@ -4718,6 +4723,8 @@ void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
 {
 	if (dwc->pending_events) {
 		dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf);
+		dwc3_thread_interrupt(dwc->irq_gadget, dwc->ev_buf);
+		pm_runtime_put(dwc->dev);
 		dwc->pending_events = false;
 		enable_irq(dwc->irq_gadget);
 	}
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index cd58f2a4e7f34d..7d49d8a0b00c2c 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -822,6 +822,9 @@ EXPORT_SYMBOL_GPL(usb_gadget_disconnect);
  * usb_gadget_activate() is called.  For example, user mode components may
  * need to be activated before the system can talk to hosts.
  *
+ * This routine may sleep; it must not be called in interrupt context
+ * (such as from within a gadget driver's disconnect() callback).
+ *
  * Returns zero on success, else negative errno.
  */
 int usb_gadget_deactivate(struct usb_gadget *gadget)
@@ -860,6 +863,8 @@ EXPORT_SYMBOL_GPL(usb_gadget_deactivate);
  * This routine activates gadget which was previously deactivated with
  * usb_gadget_deactivate() call. It calls usb_gadget_connect() if needed.
  *
+ * This routine may sleep; it must not be called in interrupt context.
+ *
  * Returns zero on success, else negative errno.
  */
 int usb_gadget_activate(struct usb_gadget *gadget)
@@ -1638,7 +1643,11 @@ static void gadget_unbind_driver(struct device *dev)
 	usb_gadget_disable_async_callbacks(udc);
 	if (gadget->irq)
 		synchronize_irq(gadget->irq);
+	mutex_unlock(&udc->connect_lock);
+
 	udc->driver->unbind(gadget);
+
+	mutex_lock(&udc->connect_lock);
 	usb_gadget_udc_stop_locked(udc);
 	mutex_unlock(&udc->connect_lock);
 
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 5e912dd29b4c99..115f05a6201a16 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -318,7 +318,8 @@ static int alauda_get_media_status(struct us_data *us, unsigned char *data)
 	rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
 		command, 0xc0, 0, 1, data, 2);
 
-	usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]);
+	if (rc == USB_STOR_XFER_GOOD)
+		usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]);
 
 	return rc;
 }
@@ -454,9 +455,14 @@ static int alauda_init_media(struct us_data *us)
 static int alauda_check_media(struct us_data *us)
 {
 	struct alauda_info *info = (struct alauda_info *) us->extra;
-	unsigned char status[2];
+	unsigned char *status = us->iobuf;
+	int rc;
 
-	alauda_get_media_status(us, status);
+	rc = alauda_get_media_status(us, status);
+	if (rc != USB_STOR_XFER_GOOD) {
+		status[0] = 0xF0;	/* Pretend there's no media */
+		status[1] = 0;
+	}
 
 	/* Check for no media or door open */
 	if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10)
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 66de880b28d01a..cdf8261e22dbd3 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -60,6 +60,7 @@ struct dp_altmode {
 
 	enum dp_state state;
 	bool hpd;
+	bool pending_hpd;
 
 	struct mutex lock; /* device lock */
 	struct work_struct work;
@@ -144,8 +145,13 @@ static int dp_altmode_status_update(struct dp_altmode *dp)
 		dp->state = DP_STATE_EXIT;
 	} else if (!(con & DP_CONF_CURRENTLY(dp->data.conf))) {
 		ret = dp_altmode_configure(dp, con);
-		if (!ret)
+		if (!ret) {
 			dp->state = DP_STATE_CONFIGURE;
+			if (dp->hpd != hpd) {
+				dp->hpd = hpd;
+				dp->pending_hpd = true;
+			}
+		}
 	} else {
 		if (dp->hpd != hpd) {
 			drm_connector_oob_hotplug_event(dp->connector_fwnode);
@@ -161,6 +167,16 @@ static int dp_altmode_configured(struct dp_altmode *dp)
 {
 	sysfs_notify(&dp->alt->dev.kobj, "displayport", "configuration");
 	sysfs_notify(&dp->alt->dev.kobj, "displayport", "pin_assignment");
+	/*
+	 * If the DFP_D/UFP_D sends a change in HPD when first notifying the
+	 * DisplayPort driver that it is connected, then we wait until
+	 * configuration is complete to signal HPD.
+	 */
+	if (dp->pending_hpd) {
+		drm_connector_oob_hotplug_event(dp->connector_fwnode);
+		sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd");
+		dp->pending_hpd = false;
+	}
 
 	return dp_altmode_notify(dp);
 }
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index 784b9d8107e9bb..65da61150ba784 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -29,6 +29,7 @@ config TYPEC_MUX_INTEL_PMC
 	tristate "Intel PMC mux control"
 	depends on ACPI
 	depends on INTEL_SCU_IPC
+	select USB_COMMON
 	select USB_ROLE_SWITCH
 	help
 	  Driver for USB muxes controlled by Intel PMC FW. Intel PMC FW can
diff --git a/drivers/usb/typec/mux/nb7vpq904m.c b/drivers/usb/typec/mux/nb7vpq904m.c
index 80e580d5012912..4d1122d9501326 100644
--- a/drivers/usb/typec/mux/nb7vpq904m.c
+++ b/drivers/usb/typec/mux/nb7vpq904m.c
@@ -463,16 +463,18 @@ static int nb7vpq904m_probe(struct i2c_client *client)
 
 	ret = nb7vpq904m_register_bridge(nb7);
 	if (ret)
-		return ret;
+		goto err_disable_gpio;
 
 	sw_desc.drvdata = nb7;
 	sw_desc.fwnode = dev->fwnode;
 	sw_desc.set = nb7vpq904m_sw_set;
 
 	nb7->sw = typec_switch_register(dev, &sw_desc);
-	if (IS_ERR(nb7->sw))
-		return dev_err_probe(dev, PTR_ERR(nb7->sw),
-				     "Error registering typec switch\n");
+	if (IS_ERR(nb7->sw)) {
+		ret = dev_err_probe(dev, PTR_ERR(nb7->sw),
+				    "Error registering typec switch\n");
+		goto err_disable_gpio;
+	}
 
 	retimer_desc.drvdata = nb7;
 	retimer_desc.fwnode = dev->fwnode;
@@ -480,12 +482,21 @@ static int nb7vpq904m_probe(struct i2c_client *client)
 
 	nb7->retimer = typec_retimer_register(dev, &retimer_desc);
 	if (IS_ERR(nb7->retimer)) {
-		typec_switch_unregister(nb7->sw);
-		return dev_err_probe(dev, PTR_ERR(nb7->retimer),
-				     "Error registering typec retimer\n");
+		ret = dev_err_probe(dev, PTR_ERR(nb7->retimer),
+				    "Error registering typec retimer\n");
+		goto err_switch_unregister;
 	}
 
 	return 0;
+
+err_switch_unregister:
+	typec_switch_unregister(nb7->sw);
+
+err_disable_gpio:
+	gpiod_set_value(nb7->enable_gpio, 0);
+	regulator_disable(nb7->vcc_supply);
+
+	return ret;
 }
 
 static void nb7vpq904m_remove(struct i2c_client *client)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 829d75ebab422b..cc1d8392649772 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -5349,6 +5349,10 @@ static void _tcpm_pd_vbus_off(struct tcpm_port *port)
 		/* Do nothing, vbus drop expected */
 		break;
 
+	case SNK_HARD_RESET_WAIT_VBUS:
+		/* Do nothing, its OK to receive vbus off events */
+		break;
+
 	default:
 		if (port->pwr_role == TYPEC_SINK && port->attached)
 			tcpm_set_state(port, SNK_UNATTACHED, tcpm_wait_for_discharge(port));
@@ -5395,6 +5399,9 @@ static void _tcpm_pd_vbus_vsafe0v(struct tcpm_port *port)
 	case SNK_DEBOUNCED:
 		/*Do nothing, still waiting for VSAFE5V for connect */
 		break;
+	case SNK_HARD_RESET_WAIT_VBUS:
+		/* Do nothing, its OK to receive vbus off events */
+		break;
 	default:
 		if (port->pwr_role == TYPEC_SINK && port->auto_vbus_discharge_enabled)
 			tcpm_set_state(port, SNK_UNATTACHED, 0);