fbdev: mx3fb: Remove the driver

The mx3fb driver does not support devicetree and i.MX has been converted
to a DT-only platform since kernel 5.10.

As there is no user for this driver anymore, just remove it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>

4 files changed, 0 insertions, 1757 deletions

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 5d93ecc01f6a44..eac0ba39581e3c 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1887,17 +1887,6 @@ config FB_PRE_INIT_FB
 	  Select this option if display contents should be inherited as set by
 	  the bootloader.
 
-config FB_MX3
-	tristate "MX3 Framebuffer support"
-	depends on FB && MX3_IPU
-	select BACKLIGHT_CLASS_DEVICE
-	select FB_IOMEM_HELPERS
-	default y
-	help
-	  This is a framebuffer device for the i.MX31 LCD Controller. So
-	  far only synchronous displays are supported. If you plan to use
-	  an LCD display with your i.MX31 system, say Y here.
-
 config FB_BROADSHEET
 	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
 	depends on FB && (ARCH_PXA || COMPILE_TEST)
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index e6b0ae094b8b5b..70569f7027ed7b 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -122,7 +122,6 @@ obj-$(CONFIG_FB_VESA)             += vesafb.o
 obj-$(CONFIG_FB_EFI)              += efifb.o
 obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
-obj-$(CONFIG_FB_MX3)		  += mx3fb.o
 obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
 obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
 obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
diff --git a/drivers/video/fbdev/mx3fb.c b/drivers/video/fbdev/mx3fb.c
deleted file mode 100644
index e6bafaba3460bb..00000000000000
--- a/drivers/video/fbdev/mx3fb.c
+++ /dev/null
@@ -1,1695 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/console.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/dma/ipu-dma.h>
-#include <linux/backlight.h>
-
-#include <linux/dma/imx-dma.h>
-#include <linux/platform_data/video-mx3fb.h>
-
-#include <asm/io.h>
-#include <linux/uaccess.h>
-
-#define MX3FB_NAME		"mx3_sdc_fb"
-
-#define MX3FB_REG_OFFSET	0xB4
-
-/* SDC Registers */
-#define SDC_COM_CONF		(0xB4 - MX3FB_REG_OFFSET)
-#define SDC_GW_CTRL		(0xB8 - MX3FB_REG_OFFSET)
-#define SDC_FG_POS		(0xBC - MX3FB_REG_OFFSET)
-#define SDC_BG_POS		(0xC0 - MX3FB_REG_OFFSET)
-#define SDC_CUR_POS		(0xC4 - MX3FB_REG_OFFSET)
-#define SDC_PWM_CTRL		(0xC8 - MX3FB_REG_OFFSET)
-#define SDC_CUR_MAP		(0xCC - MX3FB_REG_OFFSET)
-#define SDC_HOR_CONF		(0xD0 - MX3FB_REG_OFFSET)
-#define SDC_VER_CONF		(0xD4 - MX3FB_REG_OFFSET)
-#define SDC_SHARP_CONF_1	(0xD8 - MX3FB_REG_OFFSET)
-#define SDC_SHARP_CONF_2	(0xDC - MX3FB_REG_OFFSET)
-
-/* Register bits */
-#define SDC_COM_TFT_COLOR	0x00000001UL
-#define SDC_COM_FG_EN		0x00000010UL
-#define SDC_COM_GWSEL		0x00000020UL
-#define SDC_COM_GLB_A		0x00000040UL
-#define SDC_COM_KEY_COLOR_G	0x00000080UL
-#define SDC_COM_BG_EN		0x00000200UL
-#define SDC_COM_SHARP		0x00001000UL
-
-#define SDC_V_SYNC_WIDTH_L	0x00000001UL
-
-/* Display Interface registers */
-#define DI_DISP_IF_CONF		(0x0124 - MX3FB_REG_OFFSET)
-#define DI_DISP_SIG_POL		(0x0128 - MX3FB_REG_OFFSET)
-#define DI_SER_DISP1_CONF	(0x012C - MX3FB_REG_OFFSET)
-#define DI_SER_DISP2_CONF	(0x0130 - MX3FB_REG_OFFSET)
-#define DI_HSP_CLK_PER		(0x0134 - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_1	(0x0138 - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_2	(0x013C - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_3	(0x0140 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_1	(0x0144 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_2	(0x0148 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_3	(0x014C - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_1	(0x0150 - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_2	(0x0154 - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_3	(0x0158 - MX3FB_REG_OFFSET)
-#define DI_DISP3_TIME_CONF	(0x015C - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB0_MAP	(0x0160 - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB1_MAP	(0x0164 - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB2_MAP	(0x0168 - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB0_MAP	(0x016C - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB1_MAP	(0x0170 - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB2_MAP	(0x0174 - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB0_MAP	(0x0178 - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB1_MAP	(0x017C - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB2_MAP	(0x0180 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB0_MAP	(0x0184 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB1_MAP	(0x0188 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB2_MAP	(0x018C - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB0_MAP	(0x0190 - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB1_MAP	(0x0194 - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB2_MAP	(0x0198 - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB0_MAP	(0x019C - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB1_MAP	(0x01A0 - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB2_MAP	(0x01A4 - MX3FB_REG_OFFSET)
-#define DI_DISP3_B0_MAP		(0x01A8 - MX3FB_REG_OFFSET)
-#define DI_DISP3_B1_MAP		(0x01AC - MX3FB_REG_OFFSET)
-#define DI_DISP3_B2_MAP		(0x01B0 - MX3FB_REG_OFFSET)
-#define DI_DISP_ACC_CC		(0x01B4 - MX3FB_REG_OFFSET)
-#define DI_DISP_LLA_CONF	(0x01B8 - MX3FB_REG_OFFSET)
-#define DI_DISP_LLA_DATA	(0x01BC - MX3FB_REG_OFFSET)
-
-/* DI_DISP_SIG_POL bits */
-#define DI_D3_VSYNC_POL_SHIFT		28
-#define DI_D3_HSYNC_POL_SHIFT		27
-#define DI_D3_DRDY_SHARP_POL_SHIFT	26
-#define DI_D3_CLK_POL_SHIFT		25
-#define DI_D3_DATA_POL_SHIFT		24
-
-/* DI_DISP_IF_CONF bits */
-#define DI_D3_CLK_IDLE_SHIFT		26
-#define DI_D3_CLK_SEL_SHIFT		25
-#define DI_D3_DATAMSK_SHIFT		24
-
-enum ipu_panel {
-	IPU_PANEL_SHARP_TFT,
-	IPU_PANEL_TFT,
-};
-
-struct ipu_di_signal_cfg {
-	unsigned datamask_en:1;
-	unsigned clksel_en:1;
-	unsigned clkidle_en:1;
-	unsigned data_pol:1;	/* true = inverted */
-	unsigned clk_pol:1;	/* true = rising edge */
-	unsigned enable_pol:1;
-	unsigned Hsync_pol:1;	/* true = active high */
-	unsigned Vsync_pol:1;
-};
-
-static const struct fb_videomode mx3fb_modedb[] = {
-	{
-		/* 240x320 @ 60 Hz */
-		.name		= "Sharp-QVGA",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
-				  FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
-				  FB_SYNC_CLK_IDLE_EN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x33 @ 60 Hz */
-		.name		= "Sharp-CLI",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 33,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9 + 287,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
-				  FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
-				  FB_SYNC_CLK_IDLE_EN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 640x480 @ 60 Hz */
-		.name		= "NEC-VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 38255,
-		.left_margin	= 144,
-		.right_margin	= 0,
-		.upper_margin	= 34,
-		.lower_margin	= 40,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* NTSC TV output */
-		.name		= "TV-NTSC",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 37538,
-		.left_margin	= 38,
-		.right_margin	= 858 - 640 - 38 - 3,
-		.upper_margin	= 36,
-		.lower_margin	= 518 - 480 - 36 - 1,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* PAL TV output */
-		.name		= "TV-PAL",
-		.refresh	= 50,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 37538,
-		.left_margin	= 38,
-		.right_margin	= 960 - 640 - 38 - 32,
-		.upper_margin	= 32,
-		.lower_margin	= 555 - 480 - 32 - 3,
-		.hsync_len	= 32,
-		.vsync_len	= 3,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* TV output VGA mode, 640x480 @ 65 Hz */
-		.name		= "TV-VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 40574,
-		.left_margin	= 35,
-		.right_margin	= 45,
-		.upper_margin	= 9,
-		.lower_margin	= 1,
-		.hsync_len	= 46,
-		.vsync_len	= 5,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-struct mx3fb_data {
-	struct fb_info		*fbi;
-	int			backlight_level;
-	void __iomem		*reg_base;
-	spinlock_t		lock;
-	struct device		*dev;
-	struct backlight_device	*bl;
-
-	uint32_t		h_start_width;
-	uint32_t		v_start_width;
-	enum disp_data_mapping	disp_data_fmt;
-};
-
-struct dma_chan_request {
-	struct mx3fb_data	*mx3fb;
-	enum ipu_channel	id;
-};
-
-/* MX3 specific framebuffer information. */
-struct mx3fb_info {
-	int				blank;
-	enum ipu_channel		ipu_ch;
-	uint32_t			cur_ipu_buf;
-
-	u32				pseudo_palette[16];
-
-	struct completion		flip_cmpl;
-	struct mutex			mutex;	/* Protects fb-ops */
-	struct mx3fb_data		*mx3fb;
-	struct idmac_channel		*idmac_channel;
-	struct dma_async_tx_descriptor	*txd;
-	dma_cookie_t			cookie;
-	struct scatterlist		sg[2];
-
-	struct fb_var_screeninfo	cur_var; /* current var info */
-};
-
-static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value);
-static u32 sdc_get_brightness(struct mx3fb_data *mx3fb);
-
-static int mx3fb_bl_get_brightness(struct backlight_device *bl)
-{
-	struct mx3fb_data *fbd = bl_get_data(bl);
-
-	return sdc_get_brightness(fbd);
-}
-
-static int mx3fb_bl_update_status(struct backlight_device *bl)
-{
-	struct mx3fb_data *fbd = bl_get_data(bl);
-	int brightness = backlight_get_brightness(bl);
-
-	fbd->backlight_level = (fbd->backlight_level & ~0xFF) | brightness;
-
-	sdc_set_brightness(fbd, fbd->backlight_level);
-
-	return 0;
-}
-
-static const struct backlight_ops mx3fb_lcdc_bl_ops = {
-	.update_status = mx3fb_bl_update_status,
-	.get_brightness = mx3fb_bl_get_brightness,
-};
-
-static void mx3fb_init_backlight(struct mx3fb_data *fbd)
-{
-	struct backlight_properties props;
-	struct backlight_device	*bl;
-
-	if (fbd->bl)
-		return;
-
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.max_brightness = 0xff;
-	props.type = BACKLIGHT_RAW;
-	sdc_set_brightness(fbd, fbd->backlight_level);
-
-	bl = backlight_device_register("mx3fb-bl", fbd->dev, fbd,
-				       &mx3fb_lcdc_bl_ops, &props);
-	if (IS_ERR(bl)) {
-		dev_err(fbd->dev, "error %ld on backlight register\n",
-				PTR_ERR(bl));
-		return;
-	}
-
-	fbd->bl = bl;
-	bl->props.power = FB_BLANK_UNBLANK;
-	bl->props.fb_blank = FB_BLANK_UNBLANK;
-	bl->props.brightness = mx3fb_bl_get_brightness(bl);
-}
-
-static void mx3fb_exit_backlight(struct mx3fb_data *fbd)
-{
-	backlight_device_unregister(fbd->bl);
-}
-
-static void mx3fb_dma_done(void *);
-
-/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */
-static const char *fb_mode;
-static unsigned long default_bpp = 16;
-
-static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
-{
-	return __raw_readl(mx3fb->reg_base + reg);
-}
-
-static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
-{
-	__raw_writel(value, mx3fb->reg_base + reg);
-}
-
-struct di_mapping {
-	uint32_t b0, b1, b2;
-};
-
-static const struct di_mapping di_mappings[] = {
-	[IPU_DISP_DATA_MAPPING_RGB666] = { 0x0005000f, 0x000b000f, 0x0011000f },
-	[IPU_DISP_DATA_MAPPING_RGB565] = { 0x0004003f, 0x000a000f, 0x000f003f },
-	[IPU_DISP_DATA_MAPPING_RGB888] = { 0x00070000, 0x000f0000, 0x00170000 },
-};
-
-static void sdc_fb_init(struct mx3fb_info *fbi)
-{
-	struct mx3fb_data *mx3fb = fbi->mx3fb;
-	uint32_t reg;
-
-	reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-
-	mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
-}
-
-/* Returns enabled flag before uninit */
-static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
-{
-	struct mx3fb_data *mx3fb = fbi->mx3fb;
-	uint32_t reg;
-
-	reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-
-	mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
-
-	return reg & SDC_COM_BG_EN;
-}
-
-static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
-{
-	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-	struct idmac_channel *ichan = mx3_fbi->idmac_channel;
-	struct dma_chan *dma_chan = &ichan->dma_chan;
-	unsigned long flags;
-	dma_cookie_t cookie;
-
-	if (mx3_fbi->txd)
-		dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
-			to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
-	else
-		dev_dbg(mx3fb->dev, "mx3fbi %p, txd = NULL\n", mx3_fbi);
-
-	/* This enables the channel */
-	if (mx3_fbi->cookie < 0) {
-		mx3_fbi->txd = dmaengine_prep_slave_sg(dma_chan,
-		      &mx3_fbi->sg[0], 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
-		if (!mx3_fbi->txd) {
-			dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
-				dma_chan->chan_id);
-			return;
-		}
-
-		mx3_fbi->txd->callback_param	= mx3_fbi->txd;
-		mx3_fbi->txd->callback		= mx3fb_dma_done;
-
-		cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
-		dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
-		       mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
-	} else {
-		if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
-			dev_err(mx3fb->dev, "Cannot enable channel %d\n",
-				dma_chan->chan_id);
-			return;
-		}
-
-		/* Just re-activate the same buffer */
-		dma_async_issue_pending(dma_chan);
-		cookie = mx3_fbi->cookie;
-		dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
-		       mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
-	}
-
-	if (cookie >= 0) {
-		spin_lock_irqsave(&mx3fb->lock, flags);
-		sdc_fb_init(mx3_fbi);
-		mx3_fbi->cookie = cookie;
-		spin_unlock_irqrestore(&mx3fb->lock, flags);
-	}
-
-	/*
-	 * Attention! Without this msleep the channel keeps generating
-	 * interrupts. Next sdc_set_brightness() is going to be called
-	 * from mx3fb_blank().
-	 */
-	msleep(2);
-}
-
-static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
-{
-	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-	unsigned long flags;
-
-	if (mx3_fbi->txd == NULL)
-		return;
-
-	spin_lock_irqsave(&mx3fb->lock, flags);
-
-	sdc_fb_uninit(mx3_fbi);
-
-	spin_unlock_irqrestore(&mx3fb->lock, flags);
-
-	dmaengine_terminate_all(mx3_fbi->txd->chan);
-	mx3_fbi->txd = NULL;
-	mx3_fbi->cookie = -EINVAL;
-}
-
-/**
- * sdc_set_window_pos() - set window position of the respective plane.
- * @mx3fb:	mx3fb context.
- * @channel:	IPU DMAC channel ID.
- * @x_pos:	X coordinate relative to the top left corner to place window at.
- * @y_pos:	Y coordinate relative to the top left corner to place window at.
- * @return:	0 on success or negative error code on failure.
- */
-static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
-			      int16_t x_pos, int16_t y_pos)
-{
-	if (channel != IDMAC_SDC_0)
-		return -EINVAL;
-
-	x_pos += mx3fb->h_start_width;
-	y_pos += mx3fb->v_start_width;
-
-	mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
-	return 0;
-}
-
-/**
- * sdc_init_panel() - initialize a synchronous LCD panel.
- * @mx3fb:		mx3fb context.
- * @panel:		panel type.
- * @pixel_clk:		desired pixel clock frequency in Hz.
- * @width:		width of panel in pixels.
- * @height:		height of panel in pixels.
- * @h_start_width:	number of pixel clocks between the HSYNC signal pulse
- *			and the start of valid data.
- * @h_sync_width:	width of the HSYNC signal in units of pixel clocks.
- * @h_end_width:	number of pixel clocks between the end of valid data
- *			and the HSYNC signal for next line.
- * @v_start_width:	number of lines between the VSYNC signal pulse and the
- *			start of valid data.
- * @v_sync_width:	width of the VSYNC signal in units of lines
- * @v_end_width:	number of lines between the end of valid data and the
- *			VSYNC signal for next frame.
- * @sig:		bitfield of signal polarities for LCD interface.
- * @return:		0 on success or negative error code on failure.
- */
-static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
-			  uint32_t pixel_clk,
-			  uint16_t width, uint16_t height,
-			  uint16_t h_start_width, uint16_t h_sync_width,
-			  uint16_t h_end_width, uint16_t v_start_width,
-			  uint16_t v_sync_width, uint16_t v_end_width,
-			  const struct ipu_di_signal_cfg *sig)
-{
-	unsigned long lock_flags;
-	uint32_t reg;
-	uint32_t old_conf;
-	uint32_t div;
-	struct clk *ipu_clk;
-	const struct di_mapping *map;
-
-	dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
-
-	if (v_sync_width == 0 || h_sync_width == 0)
-		return -EINVAL;
-
-	/* Init panel size and blanking periods */
-	reg = ((uint32_t) (h_sync_width - 1) << 26) |
-		((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
-	mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
-
-#ifdef DEBUG
-	printk(KERN_CONT " hor_conf %x,", reg);
-#endif
-
-	reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
-	    ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
-	mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
-
-#ifdef DEBUG
-	printk(KERN_CONT " ver_conf %x\n", reg);
-#endif
-
-	mx3fb->h_start_width = h_start_width;
-	mx3fb->v_start_width = v_start_width;
-
-	switch (panel) {
-	case IPU_PANEL_SHARP_TFT:
-		mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
-		mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
-		mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
-		break;
-	case IPU_PANEL_TFT:
-		mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* Init clocking */
-
-	/*
-	 * Calculate divider: fractional part is 4 bits so simply multiple by
-	 * 2^4 to get fractional part, as long as we stay under ~250MHz and on
-	 * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
-	 */
-	ipu_clk = clk_get(mx3fb->dev, NULL);
-	if (!IS_ERR(ipu_clk)) {
-		div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
-		clk_put(ipu_clk);
-	} else {
-		div = 0;
-	}
-
-	if (div < 0x40) {	/* Divider less than 4 */
-		dev_dbg(mx3fb->dev,
-			"InitPanel() - Pixel clock divider less than 4\n");
-		div = 0x40;
-	}
-
-	dev_dbg(mx3fb->dev, "pixel clk = %u, divider %u.%u\n",
-		pixel_clk, div >> 4, (div & 7) * 125);
-
-	spin_lock_irqsave(&mx3fb->lock, lock_flags);
-
-	/*
-	 * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
-	 * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
-	 * debug. DISP3_IF_CLK_UP_WR is 0
-	 */
-	mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
-
-	/* DI settings */
-	old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
-	old_conf |= sig->datamask_en << DI_D3_DATAMSK_SHIFT |
-		sig->clksel_en << DI_D3_CLK_SEL_SHIFT |
-		sig->clkidle_en << DI_D3_CLK_IDLE_SHIFT;
-	mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
-
-	old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
-	old_conf |= sig->data_pol << DI_D3_DATA_POL_SHIFT |
-		sig->clk_pol << DI_D3_CLK_POL_SHIFT |
-		sig->enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
-		sig->Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
-		sig->Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
-	mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
-
-	map = &di_mappings[mx3fb->disp_data_fmt];
-	mx3fb_write_reg(mx3fb, map->b0, DI_DISP3_B0_MAP);
-	mx3fb_write_reg(mx3fb, map->b1, DI_DISP3_B1_MAP);
-	mx3fb_write_reg(mx3fb, map->b2, DI_DISP3_B2_MAP);
-
-	spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
-
-	dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
-		mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
-	dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
-		mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
-	dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
-		mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
-
-	return 0;
-}
-
-/**
- * sdc_set_color_key() - set the transparent color key for SDC graphic plane.
- * @mx3fb:	mx3fb context.
- * @channel:	IPU DMAC channel ID.
- * @enable:	boolean to enable or disable color keyl.
- * @color_key:	24-bit RGB color to use as transparent color key.
- * @return:	0 on success or negative error code on failure.
- */
-static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
-			     bool enable, uint32_t color_key)
-{
-	uint32_t reg, sdc_conf;
-	unsigned long lock_flags;
-
-	spin_lock_irqsave(&mx3fb->lock, lock_flags);
-
-	sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-	if (channel == IDMAC_SDC_0)
-		sdc_conf &= ~SDC_COM_GWSEL;
-	else
-		sdc_conf |= SDC_COM_GWSEL;
-
-	if (enable) {
-		reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
-		mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
-			     SDC_GW_CTRL);
-
-		sdc_conf |= SDC_COM_KEY_COLOR_G;
-	} else {
-		sdc_conf &= ~SDC_COM_KEY_COLOR_G;
-	}
-	mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
-
-	spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
-
-	return 0;
-}
-
-/**
- * sdc_set_global_alpha() - set global alpha blending modes.
- * @mx3fb:	mx3fb context.
- * @enable:	boolean to enable or disable global alpha blending. If disabled,
- *		per pixel blending is used.
- * @alpha:	global alpha value.
- * @return:	0 on success or negative error code on failure.
- */
-static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
-{
-	uint32_t reg;
-	unsigned long lock_flags;
-
-	spin_lock_irqsave(&mx3fb->lock, lock_flags);
-
-	if (enable) {
-		reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
-		mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
-
-		reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-		mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
-	} else {
-		reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-		mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
-	}
-
-	spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
-
-	return 0;
-}
-
-static u32 sdc_get_brightness(struct mx3fb_data *mx3fb)
-{
-	u32 brightness;
-
-	brightness = mx3fb_read_reg(mx3fb, SDC_PWM_CTRL);
-	brightness = (brightness >> 16) & 0xFF;
-
-	return brightness;
-}
-
-static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
-{
-	dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value);
-	/* This might be board-specific */
-	mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
-	return;
-}
-
-static uint32_t bpp_to_pixfmt(int bpp)
-{
-	uint32_t pixfmt = 0;
-	switch (bpp) {
-	case 24:
-		pixfmt = IPU_PIX_FMT_BGR24;
-		break;
-	case 32:
-		pixfmt = IPU_PIX_FMT_BGR32;
-		break;
-	case 16:
-		pixfmt = IPU_PIX_FMT_RGB565;
-		break;
-	}
-	return pixfmt;
-}
-
-static int mx3fb_blank(int blank, struct fb_info *fbi);
-static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
-				  bool lock);
-static int mx3fb_unmap_video_memory(struct fb_info *fbi);
-
-/**
- * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
- * @fbi:	framebuffer information pointer
- * @return:	0 on success or negative error code on failure.
- */
-static int mx3fb_set_fix(struct fb_info *fbi)
-{
-	struct fb_fix_screeninfo *fix = &fbi->fix;
-	struct fb_var_screeninfo *var = &fbi->var;
-
-	memcpy(fix->id, "DISP3 BG", 8);
-
-	fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
-
-	fix->type = FB_TYPE_PACKED_PIXELS;
-	fix->accel = FB_ACCEL_NONE;
-	fix->visual = FB_VISUAL_TRUECOLOR;
-	fix->xpanstep = 1;
-	fix->ypanstep = 1;
-
-	return 0;
-}
-
-static void mx3fb_dma_done(void *arg)
-{
-	struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
-	struct dma_chan *chan = tx_desc->txd.chan;
-	struct idmac_channel *ichannel = to_idmac_chan(chan);
-	struct mx3fb_data *mx3fb = ichannel->client;
-	struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
-
-	dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
-
-	/* We only need one interrupt, it will be re-enabled as needed */
-	disable_irq_nosync(ichannel->eof_irq);
-
-	complete(&mx3_fbi->flip_cmpl);
-}
-
-static bool mx3fb_must_set_par(struct fb_info *fbi)
-{
-	struct mx3fb_info *mx3_fbi = fbi->par;
-	struct fb_var_screeninfo old_var = mx3_fbi->cur_var;
-	struct fb_var_screeninfo new_var = fbi->var;
-
-	if ((fbi->var.activate & FB_ACTIVATE_FORCE) &&
-	    (fbi->var.activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW)
-		return true;
-
-	/*
-	 * Ignore xoffset and yoffset update,
-	 * because pan display handles this case.
-	 */
-	old_var.xoffset = new_var.xoffset;
-	old_var.yoffset = new_var.yoffset;
-
-	return !!memcmp(&old_var, &new_var, sizeof(struct fb_var_screeninfo));
-}
-
-static int __set_par(struct fb_info *fbi, bool lock)
-{
-	u32 mem_len, cur_xoffset, cur_yoffset;
-	struct ipu_di_signal_cfg sig_cfg;
-	enum ipu_panel mode = IPU_PANEL_TFT;
-	struct mx3fb_info *mx3_fbi = fbi->par;
-	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-	struct idmac_channel *ichan = mx3_fbi->idmac_channel;
-	struct idmac_video_param *video = &ichan->params.video;
-	struct scatterlist *sg = mx3_fbi->sg;
-
-	/* Total cleanup */
-	if (mx3_fbi->txd)
-		sdc_disable_channel(mx3_fbi);
-
-	mx3fb_set_fix(fbi);
-
-	mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
-	if (mem_len > fbi->fix.smem_len) {
-		if (fbi->fix.smem_start)
-			mx3fb_unmap_video_memory(fbi);
-
-		if (mx3fb_map_video_memory(fbi, mem_len, lock) < 0)
-			return -ENOMEM;
-	}
-
-	sg_init_table(&sg[0], 1);
-	sg_init_table(&sg[1], 1);
-
-	sg_dma_address(&sg[0]) = fbi->fix.smem_start;
-	sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
-		    fbi->fix.smem_len,
-		    offset_in_page(fbi->screen_base));
-
-	if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
-		memset(&sig_cfg, 0, sizeof(sig_cfg));
-		if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
-			sig_cfg.Hsync_pol = true;
-		if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
-			sig_cfg.Vsync_pol = true;
-		if (fbi->var.sync & FB_SYNC_CLK_INVERT)
-			sig_cfg.clk_pol = true;
-		if (fbi->var.sync & FB_SYNC_DATA_INVERT)
-			sig_cfg.data_pol = true;
-		if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
-			sig_cfg.enable_pol = true;
-		if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
-			sig_cfg.clkidle_en = true;
-		if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
-			sig_cfg.clksel_en = true;
-		if (fbi->var.sync & FB_SYNC_SHARP_MODE)
-			mode = IPU_PANEL_SHARP_TFT;
-
-		dev_dbg(fbi->device, "pixclock = %u Hz\n",
-			(u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
-
-		if (sdc_init_panel(mx3fb, mode,
-				   (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
-				   fbi->var.xres, fbi->var.yres,
-				   fbi->var.left_margin,
-				   fbi->var.hsync_len,
-				   fbi->var.right_margin +
-				   fbi->var.hsync_len,
-				   fbi->var.upper_margin,
-				   fbi->var.vsync_len,
-				   fbi->var.lower_margin +
-				   fbi->var.vsync_len, &sig_cfg) != 0) {
-			dev_err(fbi->device,
-				"mx3fb: Error initializing panel.\n");
-			return -EINVAL;
-		}
-	}
-
-	sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
-
-	mx3_fbi->cur_ipu_buf	= 0;
-
-	video->out_pixel_fmt	= bpp_to_pixfmt(fbi->var.bits_per_pixel);
-	video->out_width	= fbi->var.xres;
-	video->out_height	= fbi->var.yres;
-	video->out_stride	= fbi->var.xres_virtual;
-
-	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
-		sdc_enable_channel(mx3_fbi);
-		/*
-		 * sg[0] points to fb smem_start address
-		 * and is actually active in controller.
-		 */
-		mx3_fbi->cur_var.xoffset = 0;
-		mx3_fbi->cur_var.yoffset = 0;
-	}
-
-	/*
-	 * Preserve xoffset and yoffest in case they are
-	 * inactive in controller as fb is blanked.
-	 */
-	cur_xoffset = mx3_fbi->cur_var.xoffset;
-	cur_yoffset = mx3_fbi->cur_var.yoffset;
-	mx3_fbi->cur_var = fbi->var;
-	mx3_fbi->cur_var.xoffset = cur_xoffset;
-	mx3_fbi->cur_var.yoffset = cur_yoffset;
-
-	return 0;
-}
-
-/**
- * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
- * @fbi:	framebuffer information pointer.
- * @return:	0 on success or negative error code on failure.
- */
-static int mx3fb_set_par(struct fb_info *fbi)
-{
-	struct mx3fb_info *mx3_fbi = fbi->par;
-	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-	struct idmac_channel *ichan = mx3_fbi->idmac_channel;
-	int ret;
-
-	dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
-
-	mutex_lock(&mx3_fbi->mutex);
-
-	ret = mx3fb_must_set_par(fbi) ? __set_par(fbi, true) : 0;
-
-	mutex_unlock(&mx3_fbi->mutex);
-
-	return ret;
-}
-
-/**
- * mx3fb_check_var() - check and adjust framebuffer variable parameters.
- * @var:	framebuffer variable parameters
- * @fbi:	framebuffer information pointer
- */
-static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
-{
-	struct mx3fb_info *mx3_fbi = fbi->par;
-	u32 vtotal;
-	u32 htotal;
-
-	dev_dbg(fbi->device, "%s\n", __func__);
-
-	if (var->xres_virtual < var->xres)
-		var->xres_virtual = var->xres;
-	if (var->yres_virtual < var->yres)
-		var->yres_virtual = var->yres;
-
-	if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
-	    (var->bits_per_pixel != 16))
-		var->bits_per_pixel = default_bpp;
-
-	switch (var->bits_per_pixel) {
-	case 16:
-		var->red.length = 5;
-		var->red.offset = 11;
-		var->red.msb_right = 0;
-
-		var->green.length = 6;
-		var->green.offset = 5;
-		var->green.msb_right = 0;
-
-		var->blue.length = 5;
-		var->blue.offset = 0;
-		var->blue.msb_right = 0;
-
-		var->transp.length = 0;
-		var->transp.offset = 0;
-		var->transp.msb_right = 0;
-		break;
-	case 24:
-		var->red.length = 8;
-		var->red.offset = 16;
-		var->red.msb_right = 0;
-
-		var->green.length = 8;
-		var->green.offset = 8;
-		var->green.msb_right = 0;
-
-		var->blue.length = 8;
-		var->blue.offset = 0;
-		var->blue.msb_right = 0;
-
-		var->transp.length = 0;
-		var->transp.offset = 0;
-		var->transp.msb_right = 0;
-		break;
-	case 32:
-		var->red.length = 8;
-		var->red.offset = 16;
-		var->red.msb_right = 0;
-
-		var->green.length = 8;
-		var->green.offset = 8;
-		var->green.msb_right = 0;
-
-		var->blue.length = 8;
-		var->blue.offset = 0;
-		var->blue.msb_right = 0;
-
-		var->transp.length = 8;
-		var->transp.offset = 24;
-		var->transp.msb_right = 0;
-		break;
-	}
-
-	if (var->pixclock < 1000) {
-		htotal = var->xres + var->right_margin + var->hsync_len +
-		    var->left_margin;
-		vtotal = var->yres + var->lower_margin + var->vsync_len +
-		    var->upper_margin;
-		var->pixclock = (vtotal * htotal * 6UL) / 100UL;
-		var->pixclock = KHZ2PICOS(var->pixclock);
-		dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
-			var->pixclock);
-	}
-
-	var->height = -1;
-	var->width = -1;
-	var->grayscale = 0;
-
-	/* Preserve sync flags */
-	var->sync |= mx3_fbi->cur_var.sync;
-	mx3_fbi->cur_var.sync |= var->sync;
-
-	return 0;
-}
-
-static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
-{
-	chan &= 0xffff;
-	chan >>= 16 - bf->length;
-	return chan << bf->offset;
-}
-
-static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
-			   unsigned int green, unsigned int blue,
-			   unsigned int trans, struct fb_info *fbi)
-{
-	struct mx3fb_info *mx3_fbi = fbi->par;
-	u32 val;
-	int ret = 1;
-
-	dev_dbg(fbi->device, "%s, regno = %u\n", __func__, regno);
-
-	mutex_lock(&mx3_fbi->mutex);
-	/*
-	 * If greyscale is true, then we convert the RGB value
-	 * to greyscale no matter what visual we are using.
-	 */
-	if (fbi->var.grayscale)
-		red = green = blue = (19595 * red + 38470 * green +
-				      7471 * blue) >> 16;
-	switch (fbi->fix.visual) {
-	case FB_VISUAL_TRUECOLOR:
-		/*
-		 * 16-bit True Colour.  We encode the RGB value
-		 * according to the RGB bitfield information.
-		 */
-		if (regno < 16) {
-			u32 *pal = fbi->pseudo_palette;
-
-			val = chan_to_field(red, &fbi->var.red);
-			val |= chan_to_field(green, &fbi->var.green);
-			val |= chan_to_field(blue, &fbi->var.blue);
-
-			pal[regno] = val;
-
-			ret = 0;
-		}
-		break;
-
-	case FB_VISUAL_STATIC_PSEUDOCOLOR:
-	case FB_VISUAL_PSEUDOCOLOR:
-		break;
-	}
-	mutex_unlock(&mx3_fbi->mutex);
-
-	return ret;
-}
-
-static void __blank(int blank, struct fb_info *fbi)
-{
-	struct mx3fb_info *mx3_fbi = fbi->par;
-	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-	int was_blank = mx3_fbi->blank;
-
-	mx3_fbi->blank = blank;
-
-	/* Attention!
-	 * Do not call sdc_disable_channel() for a channel that is disabled
-	 * already! This will result in a kernel NULL pointer dereference
-	 * (mx3_fbi->txd is NULL). Hide the fact, that all blank modes are
-	 * handled equally by this driver.
-	 */
-	if (blank > FB_BLANK_UNBLANK && was_blank > FB_BLANK_UNBLANK)
-		return;
-
-	switch (blank) {
-	case FB_BLANK_POWERDOWN:
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_NORMAL:
-		sdc_set_brightness(mx3fb, 0);
-		memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
-		/* Give LCD time to update - enough for 50 and 60 Hz */
-		msleep(25);
-		sdc_disable_channel(mx3_fbi);
-		break;
-	case FB_BLANK_UNBLANK:
-		sdc_enable_channel(mx3_fbi);
-		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
-		break;
-	}
-}
-
-/**
- * mx3fb_blank() - blank the display.
- * @blank:	blank value for the panel
- * @fbi:	framebuffer information pointer
- */
-static int mx3fb_blank(int blank, struct fb_info *fbi)
-{
-	struct mx3fb_info *mx3_fbi = fbi->par;
-
-	dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__,
-		blank, fbi->screen_base, fbi->fix.smem_len);
-
-	if (mx3_fbi->blank == blank)
-		return 0;
-
-	mutex_lock(&mx3_fbi->mutex);
-	__blank(blank, fbi);
-	mutex_unlock(&mx3_fbi->mutex);
-
-	return 0;
-}
-
-/**
- * mx3fb_pan_display() - pan or wrap the display
- * @var:	variable screen buffer information.
- * @fbi:	framebuffer information pointer.
- *
- * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
- */
-static int mx3fb_pan_display(struct fb_var_screeninfo *var,
-			     struct fb_info *fbi)
-{
-	struct mx3fb_info *mx3_fbi = fbi->par;
-	u32 y_bottom;
-	unsigned long base;
-	off_t offset;
-	dma_cookie_t cookie;
-	struct scatterlist *sg = mx3_fbi->sg;
-	struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
-	struct dma_async_tx_descriptor *txd;
-	int ret;
-
-	dev_dbg(fbi->device, "%s [%c]\n", __func__,
-		list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
-
-	if (var->xoffset > 0) {
-		dev_dbg(fbi->device, "x panning not supported\n");
-		return -EINVAL;
-	}
-
-	if (mx3_fbi->cur_var.xoffset == var->xoffset &&
-	    mx3_fbi->cur_var.yoffset == var->yoffset)
-		return 0;	/* No change, do nothing */
-
-	y_bottom = var->yoffset;
-
-	if (!(var->vmode & FB_VMODE_YWRAP))
-		y_bottom += fbi->var.yres;
-
-	if (y_bottom > fbi->var.yres_virtual)
-		return -EINVAL;
-
-	mutex_lock(&mx3_fbi->mutex);
-
-	offset = var->yoffset * fbi->fix.line_length
-	       + var->xoffset * (fbi->var.bits_per_pixel / 8);
-	base = fbi->fix.smem_start + offset;
-
-	dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
-		mx3_fbi->cur_ipu_buf, base);
-
-	/*
-	 * We enable the End of Frame interrupt, which will free a tx-descriptor,
-	 * which we will need for the next dmaengine_prep_slave_sg(). The
-	 * IRQ-handler will disable the IRQ again.
-	 */
-	init_completion(&mx3_fbi->flip_cmpl);
-	enable_irq(mx3_fbi->idmac_channel->eof_irq);
-
-	ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
-	if (ret <= 0) {
-		mutex_unlock(&mx3_fbi->mutex);
-		dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
-			 "user interrupt" : "timeout");
-		disable_irq(mx3_fbi->idmac_channel->eof_irq);
-		return ret ? : -ETIMEDOUT;
-	}
-
-	mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
-
-	sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
-	sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
-		    virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
-		    offset_in_page(fbi->screen_base + offset));
-
-	if (mx3_fbi->txd)
-		async_tx_ack(mx3_fbi->txd);
-
-	txd = dmaengine_prep_slave_sg(dma_chan, sg +
-		mx3_fbi->cur_ipu_buf, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
-	if (!txd) {
-		dev_err(fbi->device,
-			"Error preparing a DMA transaction descriptor.\n");
-		mutex_unlock(&mx3_fbi->mutex);
-		return -EIO;
-	}
-
-	txd->callback_param	= txd;
-	txd->callback		= mx3fb_dma_done;
-
-	/*
-	 * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
-	 * should switch to another buffer
-	 */
-	cookie = txd->tx_submit(txd);
-	dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
-	if (cookie < 0) {
-		dev_err(fbi->device,
-			"Error updating SDC buf %d to address=0x%08lX\n",
-			mx3_fbi->cur_ipu_buf, base);
-		mutex_unlock(&mx3_fbi->mutex);
-		return -EIO;
-	}
-
-	mx3_fbi->txd = txd;
-
-	fbi->var.xoffset = var->xoffset;
-	fbi->var.yoffset = var->yoffset;
-
-	if (var->vmode & FB_VMODE_YWRAP)
-		fbi->var.vmode |= FB_VMODE_YWRAP;
-	else
-		fbi->var.vmode &= ~FB_VMODE_YWRAP;
-
-	mx3_fbi->cur_var = fbi->var;
-
-	mutex_unlock(&mx3_fbi->mutex);
-
-	dev_dbg(fbi->device, "Update complete\n");
-
-	return 0;
-}
-
-/*
- * This structure contains the pointers to the control functions that are
- * invoked by the core framebuffer driver to perform operations like
- * blitting, rectangle filling, copy regions and cursor definition.
- */
-static const struct fb_ops mx3fb_ops = {
-	.owner = THIS_MODULE,
-	FB_DEFAULT_IOMEM_OPS,
-	.fb_set_par = mx3fb_set_par,
-	.fb_check_var = mx3fb_check_var,
-	.fb_setcolreg = mx3fb_setcolreg,
-	.fb_pan_display = mx3fb_pan_display,
-	.fb_blank = mx3fb_blank,
-};
-
-#ifdef CONFIG_PM
-/*
- * Power management hooks.      Note that we won't be called from IRQ context,
- * unlike the blank functions above, so we may sleep.
- */
-
-/*
- * Suspends the framebuffer and blanks the screen. Power management support
- */
-static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
-	struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
-
-	console_lock();
-	fb_set_suspend(mx3fb->fbi, 1);
-	console_unlock();
-
-	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
-		sdc_disable_channel(mx3_fbi);
-		sdc_set_brightness(mx3fb, 0);
-
-	}
-	return 0;
-}
-
-/*
- * Resumes the framebuffer and unblanks the screen. Power management support
- */
-static int mx3fb_resume(struct platform_device *pdev)
-{
-	struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
-	struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
-
-	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
-		sdc_enable_channel(mx3_fbi);
-		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
-	}
-
-	console_lock();
-	fb_set_suspend(mx3fb->fbi, 0);
-	console_unlock();
-
-	return 0;
-}
-#else
-#define mx3fb_suspend   NULL
-#define mx3fb_resume    NULL
-#endif
-
-/*
- * Main framebuffer functions
- */
-
-/**
- * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
- * @fbi:	framebuffer information pointer
- * @mem_len:	length of mapped memory
- * @lock:	do not lock during initialisation
- * @return:	Error code indicating success or failure
- *
- * This buffer is remapped into a non-cached, non-buffered, memory region to
- * allow palette and pixel writes to occur without flushing the cache. Once this
- * area is remapped, all virtual memory access to the video memory should occur
- * at the new region.
- */
-static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
-				  bool lock)
-{
-	int retval = 0;
-	dma_addr_t addr;
-
-	fbi->screen_base = dma_alloc_wc(fbi->device, mem_len, &addr,
-					GFP_DMA | GFP_KERNEL);
-
-	if (!fbi->screen_base) {
-		dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
-			mem_len);
-		retval = -EBUSY;
-		goto err0;
-	}
-
-	if (lock)
-		mutex_lock(&fbi->mm_lock);
-	fbi->fix.smem_start = addr;
-	fbi->fix.smem_len = mem_len;
-	if (lock)
-		mutex_unlock(&fbi->mm_lock);
-
-	dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
-		(uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
-
-	fbi->screen_size = fbi->fix.smem_len;
-
-	/* Clear the screen */
-	memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
-
-	return 0;
-
-err0:
-	fbi->fix.smem_len = 0;
-	fbi->fix.smem_start = 0;
-	fbi->screen_base = NULL;
-	return retval;
-}
-
-/**
- * mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
- * @fbi:	framebuffer information pointer
- * @return:	error code indicating success or failure
- */
-static int mx3fb_unmap_video_memory(struct fb_info *fbi)
-{
-	dma_free_wc(fbi->device, fbi->fix.smem_len, fbi->screen_base,
-		    fbi->fix.smem_start);
-
-	fbi->screen_base = NULL;
-	mutex_lock(&fbi->mm_lock);
-	fbi->fix.smem_start = 0;
-	fbi->fix.smem_len = 0;
-	mutex_unlock(&fbi->mm_lock);
-	return 0;
-}
-
-/**
- * mx3fb_init_fbinfo() - initialize framebuffer information object.
- * @dev: the device
- * @ops:	framebuffer device operations
- * @return:	initialized framebuffer structure.
- */
-static struct fb_info *mx3fb_init_fbinfo(struct device *dev,
-					 const struct fb_ops *ops)
-{
-	struct fb_info *fbi;
-	struct mx3fb_info *mx3fbi;
-	int ret;
-
-	/* Allocate sufficient memory for the fb structure */
-	fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
-	if (!fbi)
-		return NULL;
-
-	mx3fbi			= fbi->par;
-	mx3fbi->cookie		= -EINVAL;
-	mx3fbi->cur_ipu_buf	= 0;
-
-	fbi->var.activate	= FB_ACTIVATE_NOW;
-
-	fbi->fbops		= ops;
-	fbi->pseudo_palette	= mx3fbi->pseudo_palette;
-
-	mutex_init(&mx3fbi->mutex);
-
-	/* Allocate colormap */
-	ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
-	if (ret < 0) {
-		framebuffer_release(fbi);
-		return NULL;
-	}
-
-	return fbi;
-}
-
-static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
-{
-	struct device *dev = mx3fb->dev;
-	struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
-	const char *name = mx3fb_pdata->name;
-	struct fb_info *fbi;
-	struct mx3fb_info *mx3fbi;
-	const struct fb_videomode *mode;
-	int ret, num_modes;
-
-	if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
-		dev_err(dev, "Illegal display data format %d\n",
-				mx3fb_pdata->disp_data_fmt);
-		return -EINVAL;
-	}
-
-	ichan->client = mx3fb;
-
-	if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
-		return -EINVAL;
-
-	fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
-	if (!fbi)
-		return -ENOMEM;
-
-	if (!fb_mode)
-		fb_mode = name;
-
-	if (!fb_mode) {
-		ret = -EINVAL;
-		goto emode;
-	}
-
-	if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
-		mode = mx3fb_pdata->mode;
-		num_modes = mx3fb_pdata->num_modes;
-	} else {
-		mode = mx3fb_modedb;
-		num_modes = ARRAY_SIZE(mx3fb_modedb);
-	}
-
-	if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
-			  num_modes, NULL, default_bpp)) {
-		ret = -EBUSY;
-		goto emode;
-	}
-
-	fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
-
-	/* Default Y virtual size is 2x panel size */
-	fbi->var.yres_virtual = fbi->var.yres * 2;
-
-	mx3fb->fbi = fbi;
-
-	/* set Display Interface clock period */
-	mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
-	/* Might need to trigger HSP clock change - see 44.3.3.8.5 */
-
-	sdc_set_brightness(mx3fb, 255);
-	sdc_set_global_alpha(mx3fb, true, 0xFF);
-	sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
-
-	mx3fbi			= fbi->par;
-	mx3fbi->idmac_channel	= ichan;
-	mx3fbi->ipu_ch		= ichan->dma_chan.chan_id;
-	mx3fbi->mx3fb		= mx3fb;
-	mx3fbi->blank		= FB_BLANK_NORMAL;
-
-	mx3fb->disp_data_fmt	= mx3fb_pdata->disp_data_fmt;
-
-	init_completion(&mx3fbi->flip_cmpl);
-	disable_irq(ichan->eof_irq);
-	dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
-	ret = __set_par(fbi, false);
-	if (ret < 0)
-		goto esetpar;
-
-	__blank(FB_BLANK_UNBLANK, fbi);
-
-	dev_info(dev, "registered, using mode %s\n", fb_mode);
-
-	ret = register_framebuffer(fbi);
-	if (ret < 0)
-		goto erfb;
-
-	return 0;
-
-erfb:
-esetpar:
-emode:
-	fb_dealloc_cmap(&fbi->cmap);
-	framebuffer_release(fbi);
-
-	return ret;
-}
-
-static bool chan_filter(struct dma_chan *chan, void *arg)
-{
-	struct dma_chan_request *rq = arg;
-	struct device *dev;
-	struct mx3fb_platform_data *mx3fb_pdata;
-
-	if (!imx_dma_is_ipu(chan))
-		return false;
-
-	if (!rq)
-		return false;
-
-	dev = rq->mx3fb->dev;
-	mx3fb_pdata = dev_get_platdata(dev);
-
-	return rq->id == chan->chan_id &&
-		mx3fb_pdata->dma_dev == chan->device->dev;
-}
-
-static void release_fbi(struct fb_info *fbi)
-{
-	mx3fb_unmap_video_memory(fbi);
-
-	fb_dealloc_cmap(&fbi->cmap);
-
-	unregister_framebuffer(fbi);
-	framebuffer_release(fbi);
-}
-
-static int mx3fb_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	int ret;
-	struct resource *sdc_reg;
-	struct mx3fb_data *mx3fb;
-	dma_cap_mask_t mask;
-	struct dma_chan *chan;
-	struct dma_chan_request rq;
-
-	/*
-	 * Display Interface (DI) and Synchronous Display Controller (SDC)
-	 * registers
-	 */
-	sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!sdc_reg)
-		return -EINVAL;
-
-	mx3fb = devm_kzalloc(&pdev->dev, sizeof(*mx3fb), GFP_KERNEL);
-	if (!mx3fb)
-		return -ENOMEM;
-
-	spin_lock_init(&mx3fb->lock);
-
-	mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
-	if (!mx3fb->reg_base) {
-		ret = -ENOMEM;
-		goto eremap;
-	}
-
-	pr_debug("Remapped %pR at %p\n", sdc_reg, mx3fb->reg_base);
-
-	/* IDMAC interface */
-	dmaengine_get();
-
-	mx3fb->dev = dev;
-	platform_set_drvdata(pdev, mx3fb);
-
-	rq.mx3fb = mx3fb;
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_cap_set(DMA_PRIVATE, mask);
-	rq.id = IDMAC_SDC_0;
-	chan = dma_request_channel(mask, chan_filter, &rq);
-	if (!chan) {
-		ret = -EBUSY;
-		goto ersdc0;
-	}
-
-	mx3fb->backlight_level = 255;
-
-	ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
-	if (ret < 0)
-		goto eisdc0;
-
-	mx3fb_init_backlight(mx3fb);
-
-	return 0;
-
-eisdc0:
-	dma_release_channel(chan);
-ersdc0:
-	dmaengine_put();
-	iounmap(mx3fb->reg_base);
-eremap:
-	dev_err(dev, "mx3fb: failed to register fb\n");
-	return ret;
-}
-
-static void mx3fb_remove(struct platform_device *dev)
-{
-	struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
-	struct fb_info *fbi = mx3fb->fbi;
-	struct mx3fb_info *mx3_fbi = fbi->par;
-	struct dma_chan *chan;
-
-	chan = &mx3_fbi->idmac_channel->dma_chan;
-	release_fbi(fbi);
-
-	mx3fb_exit_backlight(mx3fb);
-
-	dma_release_channel(chan);
-	dmaengine_put();
-
-	iounmap(mx3fb->reg_base);
-}
-
-static struct platform_driver mx3fb_driver = {
-	.driver = {
-		.name = MX3FB_NAME,
-	},
-	.probe = mx3fb_probe,
-	.remove_new = mx3fb_remove,
-	.suspend = mx3fb_suspend,
-	.resume = mx3fb_resume,
-};
-
-/*
- * Parse user specified options (`video=mx3fb:')
- * example:
- * 	video=mx3fb:bpp=16
- */
-static int __init mx3fb_setup(void)
-{
-#ifndef MODULE
-	char *opt, *options = NULL;
-
-	if (fb_get_options("mx3fb", &options))
-		return -ENODEV;
-
-	if (!options || !*options)
-		return 0;
-
-	while ((opt = strsep(&options, ",")) != NULL) {
-		if (!*opt)
-			continue;
-		if (!strncmp(opt, "bpp=", 4))
-			default_bpp = simple_strtoul(opt + 4, NULL, 0);
-		else
-			fb_mode = opt;
-	}
-#endif
-
-	return 0;
-}
-
-static int __init mx3fb_init(void)
-{
-	int ret = mx3fb_setup();
-
-	if (ret < 0)
-		return ret;
-
-	ret = platform_driver_register(&mx3fb_driver);
-	return ret;
-}
-
-static void __exit mx3fb_exit(void)
-{
-	platform_driver_unregister(&mx3fb_driver);
-}
-
-module_init(mx3fb_init);
-module_exit(mx3fb_exit);
-
-MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-MODULE_DESCRIPTION("MX3 framebuffer driver");
-MODULE_ALIAS("platform:" MX3FB_NAME);
-MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/video-mx3fb.h b/include/linux/platform_data/video-mx3fb.h
deleted file mode 100644
index d03dc322a616f9..00000000000000
--- a/include/linux/platform_data/video-mx3fb.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- */
-
-#ifndef __ASM_ARCH_MX3FB_H__
-#define __ASM_ARCH_MX3FB_H__
-
-#include <linux/device.h>
-#include <linux/fb.h>
-
-/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH	0x80000000
-#define FB_SYNC_CLK_INVERT	0x40000000
-#define FB_SYNC_DATA_INVERT	0x20000000
-#define FB_SYNC_CLK_IDLE_EN	0x10000000
-#define FB_SYNC_SHARP_MODE	0x08000000
-#define FB_SYNC_SWAP_RGB	0x04000000
-#define FB_SYNC_CLK_SEL_EN	0x02000000
-
-/*
- * Specify the way your display is connected. The IPU can arbitrarily
- * map the internal colors to the external data lines. We only support
- * the following mappings at the moment.
- */
-enum disp_data_mapping {
-	/* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */
-	IPU_DISP_DATA_MAPPING_RGB666,
-	/* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */
-	IPU_DISP_DATA_MAPPING_RGB565,
-	/* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */
-	IPU_DISP_DATA_MAPPING_RGB888,
-};
-
-/**
- * struct mx3fb_platform_data - mx3fb platform data
- *
- * @dma_dev:	pointer to the dma-device, used for dma-slave connection
- * @mode:	pointer to a platform-provided per mxc_register_fb() videomode
- */
-struct mx3fb_platform_data {
-	struct device			*dma_dev;
-	const char			*name;
-	const struct fb_videomode	*mode;
-	int				num_modes;
-	enum disp_data_mapping		disp_data_fmt;
-};
-
-#endif