Merge remote-tracking branch 'scsi-mkp/for-next' into renesas-driversNotice: this object is not reachable from any branch.

Conflicts:
	block/blk-settings.c
	include/linux/blkdev.h
Notice: this object is not reachable from any branch.

65 files changed, 363 insertions, 766 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index b1663c4a28e9a4..38c90b8e130601 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5803,10 +5803,9 @@ F:	include/uapi/misc/cxl.h
 
 CXLFLASH (IBM Coherent Accelerator Processor Interface CAPI Flash) SCSI DRIVER
 M:	Manoj N. Kumar <manoj@linux.ibm.com>
-M:	Matthew R. Ochs <mrochs@linux.ibm.com>
 M:	Uma Krishnan <ukrishn@linux.ibm.com>
 L:	linux-scsi@vger.kernel.org
-S:	Supported
+S:	Obsolete
 F:	Documentation/arch/powerpc/cxlflash.rst
 F:	drivers/scsi/cxlflash/
 F:	include/uapi/scsi/cxlflash_ioctl.h
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 8e1d7ed52fef36..409548cb96da1e 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -280,72 +280,6 @@ int queue_limits_set(struct request_queue *q, struct queue_limits *lim)
 EXPORT_SYMBOL_GPL(queue_limits_set);
 
 /**
- * blk_queue_bounce_limit - set bounce buffer limit for queue
- * @q: the request queue for the device
- * @bounce: bounce limit to enforce
- *
- * Description:
- *    Force bouncing for ISA DMA ranges or highmem.
- *
- *    DEPRECATED, don't use in new code.
- **/
-void blk_queue_bounce_limit(struct request_queue *q, enum blk_bounce bounce)
-{
-	q->limits.bounce = bounce;
-}
-EXPORT_SYMBOL(blk_queue_bounce_limit);
-
-/**
- * blk_queue_max_hw_sectors - set max sectors for a request for this queue
- * @q:  the request queue for the device
- * @max_hw_sectors:  max hardware sectors in the usual 512b unit
- *
- * Description:
- *    Enables a low level driver to set a hard upper limit,
- *    max_hw_sectors, on the size of requests.  max_hw_sectors is set by
- *    the device driver based upon the capabilities of the I/O
- *    controller.
- *
- *    max_dev_sectors is a hard limit imposed by the storage device for
- *    READ/WRITE requests. It is set by the disk driver.
- *
- *    max_sectors is a soft limit imposed by the block layer for
- *    filesystem type requests.  This value can be overridden on a
- *    per-device basis in /sys/block/<device>/queue/max_sectors_kb.
- *    The soft limit can not exceed max_hw_sectors.
- **/
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
-{
-	struct queue_limits *limits = &q->limits;
-	unsigned int max_sectors;
-
-	if ((max_hw_sectors << 9) < PAGE_SIZE) {
-		max_hw_sectors = 1 << (PAGE_SHIFT - 9);
-		pr_info("%s: set to minimum %u\n", __func__, max_hw_sectors);
-	}
-
-	max_hw_sectors = round_down(max_hw_sectors,
-				    limits->logical_block_size >> SECTOR_SHIFT);
-	limits->max_hw_sectors = max_hw_sectors;
-
-	max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors);
-
-	if (limits->max_user_sectors)
-		max_sectors = min(max_sectors, limits->max_user_sectors);
-	else
-		max_sectors = min(max_sectors, BLK_DEF_MAX_SECTORS_CAP);
-
-	max_sectors = round_down(max_sectors,
-				 limits->logical_block_size >> SECTOR_SHIFT);
-	limits->max_sectors = max_sectors;
-
-	if (!q->disk)
-		return;
-	q->disk->bdi->io_pages = max_sectors >> (PAGE_SHIFT - 9);
-}
-EXPORT_SYMBOL(blk_queue_max_hw_sectors);
-
-/**
  * blk_queue_chunk_sectors - set size of the chunk for this queue
  * @q:  the request queue for the device
  * @chunk_sectors:  chunk sectors in the usual 512b unit
@@ -440,65 +374,6 @@ void blk_queue_max_zone_append_sectors(struct request_queue *q,
 EXPORT_SYMBOL_GPL(blk_queue_max_zone_append_sectors);
 
 /**
- * blk_queue_max_segments - set max hw segments for a request for this queue
- * @q:  the request queue for the device
- * @max_segments:  max number of segments
- *
- * Description:
- *    Enables a low level driver to set an upper limit on the number of
- *    hw data segments in a request.
- **/
-void blk_queue_max_segments(struct request_queue *q, unsigned short max_segments)
-{
-	if (!max_segments) {
-		max_segments = 1;
-		pr_info("%s: set to minimum %u\n", __func__, max_segments);
-	}
-
-	q->limits.max_segments = max_segments;
-}
-EXPORT_SYMBOL(blk_queue_max_segments);
-
-/**
- * blk_queue_max_discard_segments - set max segments for discard requests
- * @q:  the request queue for the device
- * @max_segments:  max number of segments
- *
- * Description:
- *    Enables a low level driver to set an upper limit on the number of
- *    segments in a discard request.
- **/
-void blk_queue_max_discard_segments(struct request_queue *q,
-		unsigned short max_segments)
-{
-	q->limits.max_discard_segments = max_segments;
-}
-EXPORT_SYMBOL_GPL(blk_queue_max_discard_segments);
-
-/**
- * blk_queue_max_segment_size - set max segment size for blk_rq_map_sg
- * @q:  the request queue for the device
- * @max_size:  max size of segment in bytes
- *
- * Description:
- *    Enables a low level driver to set an upper limit on the size of a
- *    coalesced segment
- **/
-void blk_queue_max_segment_size(struct request_queue *q, unsigned int max_size)
-{
-	if (max_size < PAGE_SIZE) {
-		max_size = PAGE_SIZE;
-		pr_info("%s: set to minimum %u\n", __func__, max_size);
-	}
-
-	/* see blk_queue_virt_boundary() for the explanation */
-	WARN_ON_ONCE(q->limits.virt_boundary_mask);
-
-	q->limits.max_segment_size = max_size;
-}
-EXPORT_SYMBOL(blk_queue_max_segment_size);
-
-/**
  * blk_queue_logical_block_size - set logical block size for the queue
  * @q:  the request queue for the device
  * @size:  the logical block size, in bytes
@@ -664,29 +539,6 @@ void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt)
 }
 EXPORT_SYMBOL(blk_limits_io_opt);
 
-/**
- * blk_queue_io_opt - set optimal request size for the queue
- * @q:	the request queue for the device
- * @opt:  optimal request size in bytes
- *
- * Description:
- *   Storage devices may report an optimal I/O size, which is the
- *   device's preferred unit for sustained I/O.  This is rarely reported
- *   for disk drives.  For RAID arrays it is usually the stripe width or
- *   the internal track size.  A properly aligned multiple of
- *   optimal_io_size is the preferred request size for workloads where
- *   sustained throughput is desired.
- */
-void blk_queue_io_opt(struct request_queue *q, unsigned int opt)
-{
-	blk_limits_io_opt(&q->limits, opt);
-	if (!q->disk)
-		return;
-	q->disk->bdi->ra_pages =
-		max(queue_io_opt(q) * 2 / PAGE_SIZE, VM_READAHEAD_PAGES);
-}
-EXPORT_SYMBOL(blk_queue_io_opt);
-
 static int queue_limit_alignment_offset(const struct queue_limits *lim,
 		sector_t sector)
 {
@@ -937,81 +789,6 @@ void blk_queue_update_dma_pad(struct request_queue *q, unsigned int mask)
 EXPORT_SYMBOL(blk_queue_update_dma_pad);
 
 /**
- * blk_queue_segment_boundary - set boundary rules for segment merging
- * @q:  the request queue for the device
- * @mask:  the memory boundary mask
- **/
-void blk_queue_segment_boundary(struct request_queue *q, unsigned long mask)
-{
-	if (mask < PAGE_SIZE - 1) {
-		mask = PAGE_SIZE - 1;
-		pr_info("%s: set to minimum %lx\n", __func__, mask);
-	}
-
-	q->limits.seg_boundary_mask = mask;
-}
-EXPORT_SYMBOL(blk_queue_segment_boundary);
-
-/**
- * blk_queue_virt_boundary - set boundary rules for bio merging
- * @q:  the request queue for the device
- * @mask:  the memory boundary mask
- **/
-void blk_queue_virt_boundary(struct request_queue *q, unsigned long mask)
-{
-	q->limits.virt_boundary_mask = mask;
-
-	/*
-	 * Devices that require a virtual boundary do not support scatter/gather
-	 * I/O natively, but instead require a descriptor list entry for each
-	 * page (which might not be idential to the Linux PAGE_SIZE).  Because
-	 * of that they are not limited by our notion of "segment size".
-	 */
-	if (mask)
-		q->limits.max_segment_size = UINT_MAX;
-}
-EXPORT_SYMBOL(blk_queue_virt_boundary);
-
-/**
- * blk_queue_dma_alignment - set dma length and memory alignment
- * @q:     the request queue for the device
- * @mask:  alignment mask
- *
- * description:
- *    set required memory and length alignment for direct dma transactions.
- *    this is used when building direct io requests for the queue.
- *
- **/
-void blk_queue_dma_alignment(struct request_queue *q, int mask)
-{
-	q->limits.dma_alignment = mask;
-}
-EXPORT_SYMBOL(blk_queue_dma_alignment);
-
-/**
- * blk_queue_update_dma_alignment - update dma length and memory alignment
- * @q:     the request queue for the device
- * @mask:  alignment mask
- *
- * description:
- *    update required memory and length alignment for direct dma transactions.
- *    If the requested alignment is larger than the current alignment, then
- *    the current queue alignment is updated to the new value, otherwise it
- *    is left alone.  The design of this is to allow multiple objects
- *    (driver, device, transport etc) to set their respective
- *    alignments without having them interfere.
- *
- **/
-void blk_queue_update_dma_alignment(struct request_queue *q, int mask)
-{
-	BUG_ON(mask > PAGE_SIZE);
-
-	if (mask > q->limits.dma_alignment)
-		q->limits.dma_alignment = mask;
-}
-EXPORT_SYMBOL(blk_queue_update_dma_alignment);
-
-/**
  * blk_set_queue_depth - tell the block layer about the device queue depth
  * @q:		the request queue for the device
  * @depth:		queue depth
@@ -1049,28 +826,6 @@ void blk_queue_write_cache(struct request_queue *q, bool wc, bool fua)
 EXPORT_SYMBOL_GPL(blk_queue_write_cache);
 
 /**
- * blk_queue_can_use_dma_map_merging - configure queue for merging segments.
- * @q:		the request queue for the device
- * @dev:	the device pointer for dma
- *
- * Tell the block layer about merging the segments by dma map of @q.
- */
-bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
-				       struct device *dev)
-{
-	unsigned long boundary = dma_get_merge_boundary(dev);
-
-	if (!boundary)
-		return false;
-
-	/* No need to update max_segment_size. see blk_queue_virt_boundary() */
-	blk_queue_virt_boundary(q, boundary);
-
-	return true;
-}
-EXPORT_SYMBOL_GPL(blk_queue_can_use_dma_map_merging);
-
-/**
  * disk_set_zoned - inidicate a zoned device
  * @disk:	gendisk to configure
  */
diff --git a/block/bsg-lib.c b/block/bsg-lib.c
index bcc7dee6abced6..ee738d129a9f5e 100644
--- a/block/bsg-lib.c
+++ b/block/bsg-lib.c
@@ -354,12 +354,14 @@ static const struct blk_mq_ops bsg_mq_ops = {
  * bsg_setup_queue - Create and add the bsg hooks so we can receive requests
  * @dev: device to attach bsg device to
  * @name: device to give bsg device
+ * @lim: queue limits for the bsg queue
  * @job_fn: bsg job handler
  * @timeout: timeout handler function pointer
  * @dd_job_size: size of LLD data needed for each job
  */
 struct request_queue *bsg_setup_queue(struct device *dev, const char *name,
-		bsg_job_fn *job_fn, bsg_timeout_fn *timeout, int dd_job_size)
+		struct queue_limits *lim, bsg_job_fn *job_fn,
+		bsg_timeout_fn *timeout, int dd_job_size)
 {
 	struct bsg_set *bset;
 	struct blk_mq_tag_set *set;
@@ -383,7 +385,7 @@ struct request_queue *bsg_setup_queue(struct device *dev, const char *name,
 	if (blk_mq_alloc_tag_set(set))
 		goto out_tag_set;
 
-	q = blk_mq_alloc_queue(set, NULL, NULL);
+	q = blk_mq_alloc_queue(set, lim, NULL);
 	if (IS_ERR(q)) {
 		ret = PTR_ERR(q);
 		goto out_queue;
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 344c87210d8fe4..8f40f75ba08cff 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -397,7 +397,7 @@ extern const struct attribute_group *ahci_sdev_groups[];
 	.sdev_groups		= ahci_sdev_groups,			\
 	.change_queue_depth     = ata_scsi_change_queue_depth,		\
 	.tag_alloc_policy       = BLK_TAG_ALLOC_RR,             	\
-	.slave_configure        = ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 
 extern struct ata_port_operations ahci_ops;
 extern struct ata_port_operations ahci_platform_ops;
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index a8d773003d74bf..9e047bf912b12b 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1254,21 +1254,24 @@ void ata_sas_tport_delete(struct ata_port *ap)
 EXPORT_SYMBOL_GPL(ata_sas_tport_delete);
 
 /**
- *	ata_sas_slave_configure - Default slave_config routine for libata devices
+ *	ata_sas_device_configure - Default device_configure routine for libata
+ *				   devices
  *	@sdev: SCSI device to configure
+ *	@lim: queue limits
  *	@ap: ATA port to which SCSI device is attached
  *
  *	RETURNS:
  *	Zero.
  */
 
-int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
+int ata_sas_device_configure(struct scsi_device *sdev, struct queue_limits *lim,
+		struct ata_port *ap)
 {
 	ata_scsi_sdev_config(sdev);
 
-	return ata_scsi_dev_config(sdev, ap->link.device);
+	return ata_scsi_dev_config(sdev, lim, ap->link.device);
 }
-EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
+EXPORT_SYMBOL_GPL(ata_sas_device_configure);
 
 /**
  *	ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e954976891a9f5..cdf29b178ddc1e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1021,7 +1021,8 @@ bool ata_scsi_dma_need_drain(struct request *rq)
 }
 EXPORT_SYMBOL_GPL(ata_scsi_dma_need_drain);
 
-int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
+int ata_scsi_dev_config(struct scsi_device *sdev, struct queue_limits *lim,
+		struct ata_device *dev)
 {
 	struct request_queue *q = sdev->request_queue;
 	int depth = 1;
@@ -1031,7 +1032,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 
 	/* configure max sectors */
 	dev->max_sectors = min(dev->max_sectors, sdev->host->max_sectors);
-	blk_queue_max_hw_sectors(q, dev->max_sectors);
+	lim->max_hw_sectors = dev->max_sectors;
 
 	if (dev->class == ATA_DEV_ATAPI) {
 		sdev->sector_size = ATA_SECT_SIZE;
@@ -1040,7 +1041,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 		blk_queue_update_dma_pad(q, ATA_DMA_PAD_SZ - 1);
 
 		/* make room for appending the drain */
-		blk_queue_max_segments(q, queue_max_segments(q) - 1);
+		lim->max_segments--;
 
 		sdev->dma_drain_len = ATAPI_MAX_DRAIN;
 		sdev->dma_drain_buf = kmalloc(sdev->dma_drain_len, GFP_NOIO);
@@ -1077,7 +1078,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 			"sector_size=%u > PAGE_SIZE, PIO may malfunction\n",
 			sdev->sector_size);
 
-	blk_queue_update_dma_alignment(q, sdev->sector_size - 1);
+	lim->dma_alignment = sdev->sector_size - 1;
 
 	if (dev->flags & ATA_DFLAG_AN)
 		set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
@@ -1131,8 +1132,9 @@ int ata_scsi_slave_alloc(struct scsi_device *sdev)
 EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc);
 
 /**
- *	ata_scsi_slave_config - Set SCSI device attributes
+ *	ata_scsi_device_configure - Set SCSI device attributes
  *	@sdev: SCSI device to examine
+ *	@lim: queue limits
  *
  *	This is called before we actually start reading
  *	and writing to the device, to configure certain
@@ -1142,17 +1144,18 @@ EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc);
  *	Defined by SCSI layer.  We don't really care.
  */
 
-int ata_scsi_slave_config(struct scsi_device *sdev)
+int ata_scsi_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
 
 	if (dev)
-		return ata_scsi_dev_config(sdev, dev);
+		return ata_scsi_dev_config(sdev, lim, dev);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
+EXPORT_SYMBOL_GPL(ata_scsi_device_configure);
 
 /**
  *	ata_scsi_slave_destroy - SCSI device is about to be destroyed
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 1a9881dc2aa15d..38ce13b5547449 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -131,7 +131,8 @@ extern void ata_scsi_dev_rescan(struct work_struct *work);
 extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
 			      unsigned int id, u64 lun);
 void ata_scsi_sdev_config(struct scsi_device *sdev);
-int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev);
+int ata_scsi_dev_config(struct scsi_device *sdev, struct queue_limits *lim,
+		struct ata_device *dev);
 int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev);
 
 /* libata-eh.c */
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 88b2e9817f49df..817838e2f70e09 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -796,7 +796,8 @@ static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
 /* Hook the standard slave config to fixup some HW related alignment
  * restrictions
  */
-static int pata_macio_slave_config(struct scsi_device *sdev)
+static int pata_macio_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct pata_macio_priv *priv = ap->private_data;
@@ -805,7 +806,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 	int rc;
 
 	/* First call original */
-	rc = ata_scsi_slave_config(sdev);
+	rc = ata_scsi_device_configure(sdev, lim);
 	if (rc)
 		return rc;
 
@@ -814,7 +815,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 
 	/* OHare has issues with non cache aligned DMA on some chipsets */
 	if (priv->kind == controller_ohare) {
-		blk_queue_update_dma_alignment(sdev->request_queue, 31);
+		lim->dma_alignment = 31;
 		blk_queue_update_dma_pad(sdev->request_queue, 31);
 
 		/* Tell the world about it */
@@ -829,7 +830,7 @@ static int pata_macio_slave_config(struct scsi_device *sdev)
 	/* Shasta and K2 seem to have "issues" with reads ... */
 	if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) {
 		/* Allright these are bad, apply restrictions */
-		blk_queue_update_dma_alignment(sdev->request_queue, 15);
+		lim->dma_alignment = 15;
 		blk_queue_update_dma_pad(sdev->request_queue, 15);
 
 		/* We enable MWI and hack cache line size directly here, this
@@ -918,7 +919,7 @@ static const struct scsi_host_template pata_macio_sht = {
 	 * use 64K minus 256
 	 */
 	.max_segment_size	= MAX_DBDMA_SEG,
-	.slave_configure	= pata_macio_slave_config,
+	.device_configure	= pata_macio_device_configure,
 	.sdev_groups		= ata_common_sdev_groups,
 	.can_queue		= ATA_DEF_QUEUE,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 9bec0aee92e04c..05c905827dc5c6 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -673,7 +673,7 @@ static const struct scsi_host_template mv6_sht = {
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth	= ata_scsi_change_queue_depth,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
-	.slave_configure	= ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 };
 
 static struct ata_port_operations mv5_ops = {
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 0a0cee755bde73..36d99043ef50ff 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -296,7 +296,8 @@ static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_adma_slave_config(struct scsi_device *sdev);
+static int nv_adma_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static enum ata_completion_errors nv_adma_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
@@ -318,7 +319,8 @@ static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 static void nv_mcp55_thaw(struct ata_port *ap);
 static void nv_mcp55_freeze(struct ata_port *ap);
 static void nv_swncq_error_handler(struct ata_port *ap);
-static int nv_swncq_slave_config(struct scsi_device *sdev);
+static int nv_swncq_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim);
 static int nv_swncq_port_start(struct ata_port *ap);
 static enum ata_completion_errors nv_swncq_qc_prep(struct ata_queued_cmd *qc);
 static void nv_swncq_fill_sg(struct ata_queued_cmd *qc);
@@ -380,7 +382,7 @@ static const struct scsi_host_template nv_adma_sht = {
 	.can_queue		= NV_ADMA_MAX_CPBS,
 	.sg_tablesize		= NV_ADMA_SGTBL_TOTAL_LEN,
 	.dma_boundary		= NV_ADMA_DMA_BOUNDARY,
-	.slave_configure	= nv_adma_slave_config,
+	.device_configure	= nv_adma_device_configure,
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth     = ata_scsi_change_queue_depth,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
@@ -391,7 +393,7 @@ static const struct scsi_host_template nv_swncq_sht = {
 	.can_queue		= ATA_MAX_QUEUE - 1,
 	.sg_tablesize		= LIBATA_MAX_PRD,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= nv_swncq_slave_config,
+	.device_configure	= nv_swncq_device_configure,
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth     = ata_scsi_change_queue_depth,
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,
@@ -661,7 +663,8 @@ static void nv_adma_mode(struct ata_port *ap)
 	pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
 }
 
-static int nv_adma_slave_config(struct scsi_device *sdev)
+static int nv_adma_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct nv_adma_port_priv *pp = ap->private_data;
@@ -673,7 +676,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
 	int adma_enable;
 	u32 current_reg, new_reg, config_mask;
 
-	rc = ata_scsi_slave_config(sdev);
+	rc = ata_scsi_device_configure(sdev, lim);
 
 	if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
 		/* Not a proper libata device, ignore */
@@ -740,8 +743,8 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
 		rc = dma_set_mask(&pdev->dev, pp->adma_dma_mask);
 	}
 
-	blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
-	blk_queue_max_segments(sdev->request_queue, sg_tablesize);
+	lim->seg_boundary_mask = segment_boundary;
+	lim->max_segments = sg_tablesize;
 	ata_port_info(ap,
 		      "DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
 		      (unsigned long long)*ap->host->dev->dma_mask,
@@ -1868,7 +1871,8 @@ static void nv_swncq_host_init(struct ata_host *host)
 	writel(~0x0, mmio + NV_INT_STATUS_MCP55);
 }
 
-static int nv_swncq_slave_config(struct scsi_device *sdev)
+static int nv_swncq_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -1878,7 +1882,7 @@ static int nv_swncq_slave_config(struct scsi_device *sdev)
 	u8 check_maxtor = 0;
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
 
-	rc = ata_scsi_slave_config(sdev);
+	rc = ata_scsi_device_configure(sdev, lim);
 	if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
 		/* Not a proper libata device, ignore */
 		return rc;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 142e70bfc4982c..72c03cbdaff43b 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -381,7 +381,7 @@ static const struct scsi_host_template sil24_sht = {
 	.tag_alloc_policy	= BLK_TAG_ALLOC_FIFO,
 	.sdev_groups		= ata_ncq_sdev_groups,
 	.change_queue_depth	= ata_scsi_change_queue_depth,
-	.slave_configure	= ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 };
 
 static struct ata_port_operations sil24_ops = {
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index e779d866022b9f..827dee0f57dde2 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1500,19 +1500,14 @@ static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
 
 	sdev->allow_restart = 1;
 
-	/*
-	 * SBP-2 does not require any alignment, but we set it anyway
-	 * for compatibility with earlier versions of this driver.
-	 */
-	blk_queue_update_dma_alignment(sdev->request_queue, 4 - 1);
-
 	if (lu->tgt->workarounds & SBP2_WORKAROUND_INQUIRY_36)
 		sdev->inquiry_len = 36;
 
 	return 0;
 }
 
-static int sbp2_scsi_slave_configure(struct scsi_device *sdev)
+static int sbp2_scsi_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct sbp2_logical_unit *lu = sdev->hostdata;
 
@@ -1538,7 +1533,7 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev)
 		sdev->start_stop_pwr_cond = 1;
 
 	if (lu->tgt->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS)
-		blk_queue_max_hw_sectors(sdev->request_queue, 128 * 1024 / 512);
+		lim->max_hw_sectors = 128 * 1024 / 512;
 
 	return 0;
 }
@@ -1596,7 +1591,7 @@ static const struct scsi_host_template scsi_driver_template = {
 	.proc_name		= "sbp2",
 	.queuecommand		= sbp2_scsi_queuecommand,
 	.slave_alloc		= sbp2_scsi_slave_alloc,
-	.slave_configure	= sbp2_scsi_slave_configure,
+	.device_configure	= sbp2_scsi_device_configure,
 	.eh_abort_handler	= sbp2_scsi_abort,
 	.this_id		= -1,
 	.sg_tablesize		= SG_ALL,
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index c459f709107b7c..a3c17c4fe69c54 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -129,6 +129,7 @@ static const struct scsi_host_template mptfc_driver_template = {
 	.sg_tablesize			= MPT_SCSI_SG_DEPTH,
 	.max_sectors			= 8192,
 	.cmd_per_lun			= 7,
+	.dma_alignment			= 511,
 	.shost_groups			= mptscsih_host_attr_groups,
 };
 
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 300f8e955a5319..30cb4f64e77047 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -2020,6 +2020,7 @@ static const struct scsi_host_template mptsas_driver_template = {
 	.sg_tablesize			= MPT_SCSI_SG_DEPTH,
 	.max_sectors			= 8192,
 	.cmd_per_lun			= 7,
+	.dma_alignment			= 511,
 	.shost_groups			= mptscsih_host_attr_groups,
 	.no_write_same			= 1,
 };
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 9080a73b4ea64a..6c3f25cc33ff99 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2438,8 +2438,6 @@ mptscsih_slave_configure(struct scsi_device *sdev)
 		"tagged %d, simple %d\n",
 		ioc->name,sdev->tagged_supported, sdev->simple_tags));
 
-	blk_queue_dma_alignment (sdev->request_queue, 512 - 1);
-
 	return 0;
 }
 
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 6c5920db1e9dc5..574b882c9a8540 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -843,6 +843,7 @@ static const struct scsi_host_template mptspi_driver_template = {
 	.sg_tablesize			= MPT_SCSI_SG_DEPTH,
 	.max_sectors			= 8192,
 	.cmd_per_lun			= 7,
+	.dma_alignment			= 511,
 	.shost_groups			= mptscsih_host_attr_groups,
 };
 
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 180a008d38eaaf..2f16f543079b4f 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -4561,9 +4561,9 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track(
 	len_to_track_end = 0;
 	/*
 	 * A tidaw can address 4k of memory, but must not cross page boundaries
-	 * We can let the block layer handle this by setting
-	 * blk_queue_segment_boundary to page boundaries and
-	 * blk_max_segment_size to page size when setting up the request queue.
+	 * We can let the block layer handle this by setting seg_boundary_mask
+	 * to page boundaries and max_segment_size to page size when setting up
+	 * the request queue.
 	 * For write requests, a TIDAW must not cross track boundaries, because
 	 * we have to set the CBC flag on the last tidaw for each track.
 	 */
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 055adb349b0e41..83f16fc14d9630 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -746,6 +746,7 @@ struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *setup)
 	/* need to have host registered before triggering any interrupt */
 	list_add_tail(&HOSTDATA(shpnt)->host_list, &aha152x_host_list);
 
+	shpnt->no_highmem = true;
 	shpnt->io_port   = setup->io_port;
 	shpnt->n_io_port = IO_RANGE;
 	shpnt->irq       = setup->irq;
@@ -2940,12 +2941,6 @@ static int aha152x_show_info(struct seq_file *m, struct Scsi_Host *shpnt)
 	return 0;
 }
 
-static int aha152x_adjust_queue(struct scsi_device *device)
-{
-	blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
-	return 0;
-}
-
 static const struct scsi_host_template aha152x_driver_template = {
 	.module				= THIS_MODULE,
 	.name				= AHA152X_REVID,
@@ -2961,7 +2956,6 @@ static const struct scsi_host_template aha152x_driver_template = {
 	.this_id			= 7,
 	.sg_tablesize			= SG_ALL,
 	.dma_boundary			= PAGE_SIZE - 1,
-	.slave_alloc			= aha152x_adjust_queue,
 	.cmd_size			= sizeof(struct aha152x_cmd_priv),
 };
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 1e4550156b735d..d223f482488fc6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -643,7 +643,8 @@ extern int hisi_sas_probe(struct platform_device *pdev,
 			  const struct hisi_sas_hw *ops);
 extern void hisi_sas_remove(struct platform_device *pdev);
 
-extern int hisi_sas_slave_configure(struct scsi_device *sdev);
+int hisi_sas_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim);
 extern int hisi_sas_slave_alloc(struct scsi_device *sdev);
 extern int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time);
 extern void hisi_sas_scan_start(struct Scsi_Host *shost);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 35f8e00850d6cb..ec1a3e7ee94d30 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -868,10 +868,11 @@ err_out:
 	return rc;
 }
 
-int hisi_sas_slave_configure(struct scsi_device *sdev)
+int hisi_sas_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct domain_device *dev = sdev_to_domain_dev(sdev);
-	int ret = sas_slave_configure(sdev);
+	int ret = sas_device_configure(sdev, lim);
 
 	if (ret)
 		return ret;
@@ -880,7 +881,7 @@ int hisi_sas_slave_configure(struct scsi_device *sdev)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(hisi_sas_slave_configure);
+EXPORT_SYMBOL_GPL(hisi_sas_device_configure);
 
 void hisi_sas_scan_start(struct Scsi_Host *shost)
 {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 161feae3acaba2..71b5008c3552cb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1736,7 +1736,7 @@ ATTRIBUTE_GROUPS(host_v1_hw);
 
 static const struct scsi_host_template sht_v1_hw = {
 	LIBSAS_SHT_BASE_NO_SLAVE_INIT
-	.slave_configure	= hisi_sas_slave_configure,
+	.device_configure	= hisi_sas_device_configure,
 	.scan_finished		= hisi_sas_scan_finished,
 	.scan_start		= hisi_sas_scan_start,
 	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index d89e97e8f5c2c2..342d75f12051d2 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3568,7 +3568,7 @@ static void map_queues_v2_hw(struct Scsi_Host *shost)
 
 static const struct scsi_host_template sht_v2_hw = {
 	LIBSAS_SHT_BASE_NO_SLAVE_INIT
-	.slave_configure	= hisi_sas_slave_configure,
+	.device_configure	= hisi_sas_device_configure,
 	.scan_finished		= hisi_sas_scan_finished,
 	.scan_start		= hisi_sas_scan_start,
 	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index e66379643b920a..feda9b54b4434f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2902,11 +2902,12 @@ static ssize_t iopoll_q_cnt_v3_hw_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(iopoll_q_cnt_v3_hw);
 
-static int slave_configure_v3_hw(struct scsi_device *sdev)
+static int device_configure_v3_hw(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct Scsi_Host *shost = dev_to_shost(&sdev->sdev_gendev);
 	struct hisi_hba *hisi_hba = shost_priv(shost);
-	int ret = hisi_sas_slave_configure(sdev);
+	int ret = hisi_sas_device_configure(sdev, lim);
 	struct device *dev = hisi_hba->dev;
 
 	if (ret)
@@ -3329,7 +3330,7 @@ static void hisi_sas_map_queues(struct Scsi_Host *shost)
 
 static const struct scsi_host_template sht_v3_hw = {
 	LIBSAS_SHT_BASE_NO_SLAVE_INIT
-	.slave_configure	= slave_configure_v3_hw,
+	.device_configure	= device_configure_v3_hw,
 	.scan_finished		= hisi_sas_scan_finished,
 	.scan_start		= hisi_sas_scan_start,
 	.map_queues		= hisi_sas_map_queues,
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 2d92549e524319..7f987335b44c1a 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -479,6 +479,12 @@ struct Scsi_Host *scsi_host_alloc(const struct scsi_host_template *sht, int priv
 	else
 		shost->max_segment_size = BLK_MAX_SEGMENT_SIZE;
 
+	/* 32-byte (dword) is a common minimum for HBAs. */
+	if (sht->dma_alignment)
+		shost->dma_alignment = sht->dma_alignment;
+	else
+		shost->dma_alignment = 3;
+
 	/*
 	 * assume a 4GB boundary, if not set
 	 */
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index f5334ccbf2cac3..e889f268601b4f 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -1151,11 +1151,11 @@ static struct attribute *hptiop_host_attrs[] = {
 
 ATTRIBUTE_GROUPS(hptiop_host);
 
-static int hptiop_slave_config(struct scsi_device *sdev)
+static int hptiop_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	if (sdev->type == TYPE_TAPE)
-		blk_queue_max_hw_sectors(sdev->request_queue, 8192);
-
+		lim->max_hw_sectors = 8192;
 	return 0;
 }
 
@@ -1168,7 +1168,7 @@ static const struct scsi_host_template driver_template = {
 	.emulated                   = 0,
 	.proc_name                  = driver_name,
 	.shost_groups		    = hptiop_host_groups,
-	.slave_configure            = hptiop_slave_config,
+	.device_configure	    = hptiop_device_configure,
 	.this_id                    = -1,
 	.change_queue_depth         = hptiop_adjust_disk_queue_depth,
 	.cmd_size		    = sizeof(struct hpt_cmd_priv),
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 05b126bfd18b55..a3d1013c83075c 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -5541,8 +5541,6 @@ static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
 			rport->supported_classes |= FC_COS_CLASS2;
 		if (be32_to_cpu(tgt->service_parms.class3_parms[0]) & 0x80000000)
 			rport->supported_classes |= FC_COS_CLASS3;
-		if (rport->rqst_q)
-			blk_queue_max_segments(rport->rqst_q, 1);
 	} else
 		tgt_dbg(tgt, "rport add failed\n");
 	spin_unlock_irqrestore(vhost->host->host_lock, flags);
@@ -6391,8 +6389,6 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 
 	ibmvfc_init_sub_crqs(vhost);
 
-	if (shost_to_fc_host(shost)->rqst_q)
-		blk_queue_max_segments(shost_to_fc_host(shost)->rqst_q, 1);
 	dev_set_drvdata(dev, vhost);
 	spin_lock(&ibmvfc_driver_lock);
 	list_add_tail(&vhost->queue, &ibmvfc_head);
@@ -6547,6 +6543,7 @@ static struct fc_function_template ibmvfc_transport_functions = {
 	.get_starget_port_id = ibmvfc_get_starget_port_id,
 	.show_starget_port_id = 1,
 
+	.max_bsg_segments = 1,
 	.bsg_request = ibmvfc_bsg_request,
 	.bsg_timeout = ibmvfc_bsg_timeout,
 };
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 180a5ddedb2cda..21339da505f1ea 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -1100,16 +1100,6 @@ static int device_check(imm_struct *dev, bool autodetect)
 	return -ENODEV;
 }
 
-/*
- * imm cannot deal with highmem, so this causes all IO pages for this host
- * to reside in low memory (hence mapped)
- */
-static int imm_adjust_queue(struct scsi_device *device)
-{
-	blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
-	return 0;
-}
-
 static const struct scsi_host_template imm_template = {
 	.module			= THIS_MODULE,
 	.proc_name		= "imm",
@@ -1123,7 +1113,6 @@ static const struct scsi_host_template imm_template = {
 	.this_id		= 7,
 	.sg_tablesize		= SG_ALL,
 	.can_queue		= 1,
-	.slave_alloc		= imm_adjust_queue,
 	.cmd_size		= sizeof(struct scsi_pointer),
 };
 
@@ -1235,6 +1224,7 @@ static int __imm_attach(struct parport *pb)
 	host = scsi_host_alloc(&imm_template, sizeof(imm_struct *));
 	if (!host)
 		goto out1;
+	host->no_highmem = true;
 	host->io_port = pb->base;
 	host->n_io_port = ports;
 	host->dma_channel = -1;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index e0326f1e655956..31cf2d31cceba0 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -4769,15 +4769,17 @@ static void ipr_slave_destroy(struct scsi_device *sdev)
 }
 
 /**
- * ipr_slave_configure - Configure a SCSI device
+ * ipr_device_configure - Configure a SCSI device
  * @sdev:	scsi device struct
+ * @lim:	queue limits
  *
  * This function configures the specified scsi device.
  *
  * Return value:
  * 	0 on success
  **/
-static int ipr_slave_configure(struct scsi_device *sdev)
+static int ipr_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
 	struct ipr_resource_entry *res;
@@ -4798,7 +4800,7 @@ static int ipr_slave_configure(struct scsi_device *sdev)
 			sdev->no_report_opcodes = 1;
 			blk_queue_rq_timeout(sdev->request_queue,
 					     IPR_VSET_RW_TIMEOUT);
-			blk_queue_max_hw_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS);
+			lim->max_hw_sectors = IPR_VSET_MAX_SECTORS;
 		}
 		spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 
@@ -6397,7 +6399,7 @@ static const struct scsi_host_template driver_template = {
 	.eh_device_reset_handler = ipr_eh_dev_reset,
 	.eh_host_reset_handler = ipr_eh_host_reset,
 	.slave_alloc = ipr_slave_alloc,
-	.slave_configure = ipr_slave_configure,
+	.device_configure = ipr_device_configure,
 	.slave_destroy = ipr_slave_destroy,
 	.scan_finished = ipr_scan_finished,
 	.target_destroy = ipr_target_destroy,
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 8e14cea15f9808..60688f18fac6f7 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -943,6 +943,7 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max,
 	shost->max_id = 0;
 	shost->max_channel = 0;
 	shost->max_cmd_len = SCSI_MAX_VARLEN_CDB_SIZE;
+	shost->dma_alignment = 0;
 
 	rc = iscsi_host_get_max_scsi_cmds(shost, cmds_max);
 	if (rc < 0)
@@ -1065,7 +1066,6 @@ static int iscsi_sw_tcp_slave_configure(struct scsi_device *sdev)
 	if (conn->datadgst_en)
 		blk_queue_flag_set(QUEUE_FLAG_STABLE_WRITES,
 				   sdev->request_queue);
-	blk_queue_dma_alignment(sdev->request_queue, 0);
 	return 0;
 }
 
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 9047cfcd1072ec..da11d32840e272 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -804,14 +804,15 @@ EXPORT_SYMBOL_GPL(sas_target_alloc);
 
 #define SAS_DEF_QD 256
 
-int sas_slave_configure(struct scsi_device *scsi_dev)
+int sas_device_configure(struct scsi_device *scsi_dev,
+		struct queue_limits *lim)
 {
 	struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
 
 	BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
 
 	if (dev_is_sata(dev)) {
-		ata_sas_slave_configure(scsi_dev, dev->sata_dev.ap);
+		ata_sas_device_configure(scsi_dev, lim, dev->sata_dev.ap);
 		return 0;
 	}
 
@@ -829,7 +830,7 @@ int sas_slave_configure(struct scsi_device *scsi_dev)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(sas_slave_configure);
+EXPORT_SYMBOL_GPL(sas_device_configure);
 
 int sas_change_queue_depth(struct scsi_device *sdev, int depth)
 {
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 56624cbf7fa5e7..5680c6cdb22193 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -2701,7 +2701,7 @@ int megasas_get_ctrl_info(struct megasas_instance *instance);
 int
 megasas_sync_pd_seq_num(struct megasas_instance *instance, bool pend);
 void megasas_set_dynamic_target_properties(struct scsi_device *sdev,
-					   bool is_target_prop);
+		struct queue_limits *lim, bool is_target_prop);
 int megasas_get_target_prop(struct megasas_instance *instance,
 			    struct scsi_device *sdev);
 void megasas_get_snapdump_properties(struct megasas_instance *instance);
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 631a24d91fa9c0..88acefbf9aeaba 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1888,7 +1888,7 @@ static struct megasas_instance *megasas_lookup_instance(u16 host_no)
 * Returns void
 */
 void megasas_set_dynamic_target_properties(struct scsi_device *sdev,
-					   bool is_target_prop)
+		struct queue_limits *lim, bool is_target_prop)
 {
 	u16 pd_index = 0, ld;
 	u32 device_id;
@@ -1915,8 +1915,10 @@ void megasas_set_dynamic_target_properties(struct scsi_device *sdev,
 			return;
 		raid = MR_LdRaidGet(ld, local_map_ptr);
 
-		if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER)
-			blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
+		if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER) {
+			if (lim)
+				lim->dma_alignment = 0x7;
+		}
 
 		mr_device_priv_data->is_tm_capable =
 			raid->capability.tmCapable;
@@ -1967,7 +1969,8 @@ void megasas_set_dynamic_target_properties(struct scsi_device *sdev,
  *
  */
 static inline void
-megasas_set_nvme_device_properties(struct scsi_device *sdev, u32 max_io_size)
+megasas_set_nvme_device_properties(struct scsi_device *sdev,
+		struct queue_limits *lim, u32 max_io_size)
 {
 	struct megasas_instance *instance;
 	u32 mr_nvme_pg_size;
@@ -1976,10 +1979,10 @@ megasas_set_nvme_device_properties(struct scsi_device *sdev, u32 max_io_size)
 	mr_nvme_pg_size = max_t(u32, instance->nvme_page_size,
 				MR_DEFAULT_NVME_PAGE_SIZE);
 
-	blk_queue_max_hw_sectors(sdev->request_queue, (max_io_size / 512));
+	lim->max_hw_sectors = max_io_size / 512;
+	lim->virt_boundary_mask = mr_nvme_pg_size - 1;
 
 	blk_queue_flag_set(QUEUE_FLAG_NOMERGES, sdev->request_queue);
-	blk_queue_virt_boundary(sdev->request_queue, mr_nvme_pg_size - 1);
 }
 
 /*
@@ -2041,7 +2044,7 @@ static void megasas_set_fw_assisted_qd(struct scsi_device *sdev,
  * @is_target_prop			true, if fw provided target properties.
  */
 static void megasas_set_static_target_properties(struct scsi_device *sdev,
-						 bool is_target_prop)
+		struct queue_limits *lim, bool is_target_prop)
 {
 	u32 max_io_size_kb = MR_DEFAULT_NVME_MDTS_KB;
 	struct megasas_instance *instance;
@@ -2060,13 +2063,15 @@ static void megasas_set_static_target_properties(struct scsi_device *sdev,
 		max_io_size_kb = le32_to_cpu(instance->tgt_prop->max_io_size_kb);
 
 	if (instance->nvme_page_size && max_io_size_kb)
-		megasas_set_nvme_device_properties(sdev, (max_io_size_kb << 10));
+		megasas_set_nvme_device_properties(sdev, lim,
+				max_io_size_kb << 10);
 
 	megasas_set_fw_assisted_qd(sdev, is_target_prop);
 }
 
 
-static int megasas_slave_configure(struct scsi_device *sdev)
+static int megasas_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	u16 pd_index = 0;
 	struct megasas_instance *instance;
@@ -2096,10 +2101,10 @@ static int megasas_slave_configure(struct scsi_device *sdev)
 		ret_target_prop = megasas_get_target_prop(instance, sdev);
 
 	is_target_prop = (ret_target_prop == DCMD_SUCCESS) ? true : false;
-	megasas_set_static_target_properties(sdev, is_target_prop);
+	megasas_set_static_target_properties(sdev, lim, is_target_prop);
 
 	/* This sdev property may change post OCR */
-	megasas_set_dynamic_target_properties(sdev, is_target_prop);
+	megasas_set_dynamic_target_properties(sdev, lim, is_target_prop);
 
 	mutex_unlock(&instance->reset_mutex);
 
@@ -3507,7 +3512,7 @@ static const struct scsi_host_template megasas_template = {
 	.module = THIS_MODULE,
 	.name = "Avago SAS based MegaRAID driver",
 	.proc_name = "megaraid_sas",
-	.slave_configure = megasas_slave_configure,
+	.device_configure = megasas_device_configure,
 	.slave_alloc = megasas_slave_alloc,
 	.slave_destroy = megasas_slave_destroy,
 	.queuecommand = megasas_queue_command,
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index c60014e07b449e..6c1fb8149553a8 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -5119,7 +5119,8 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason)
 					ret_target_prop = megasas_get_target_prop(instance, sdev);
 
 				is_target_prop = (ret_target_prop == DCMD_SUCCESS) ? true : false;
-				megasas_set_dynamic_target_properties(sdev, is_target_prop);
+				megasas_set_dynamic_target_properties(sdev, NULL,
+						is_target_prop);
 			}
 
 			status_reg = instance->instancet->read_fw_status_reg
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index d1c93978f28a58..f5a1529fa53715 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -1352,7 +1352,6 @@ void mpi3mr_wait_for_host_io(struct mpi3mr_ioc *mrioc, u32 timeout);
 void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc);
 void mpi3mr_flush_host_io(struct mpi3mr_ioc *mrioc);
 void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc);
-void mpi3mr_refresh_tgtdevs(struct mpi3mr_ioc *mrioc);
 void mpi3mr_flush_delayed_cmd_lists(struct mpi3mr_ioc *mrioc);
 void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code);
 void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc);
diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c
index e07678f73556e7..1638109a68a0b4 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_app.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_app.c
@@ -1845,6 +1845,10 @@ void mpi3mr_bsg_init(struct mpi3mr_ioc *mrioc)
 {
 	struct device *bsg_dev = &mrioc->bsg_dev;
 	struct device *parent = &mrioc->shost->shost_gendev;
+	struct queue_limits lim = {
+		.max_hw_sectors		= MPI3MR_MAX_APP_XFER_SECTORS,
+		.max_segments		= MPI3MR_MAX_APP_XFER_SEGMENTS,
+	};
 
 	device_initialize(bsg_dev);
 
@@ -1860,20 +1864,14 @@ void mpi3mr_bsg_init(struct mpi3mr_ioc *mrioc)
 		return;
 	}
 
-	mrioc->bsg_queue = bsg_setup_queue(bsg_dev, dev_name(bsg_dev),
+	mrioc->bsg_queue = bsg_setup_queue(bsg_dev, dev_name(bsg_dev), &lim,
 			mpi3mr_bsg_request, NULL, 0);
 	if (IS_ERR(mrioc->bsg_queue)) {
 		ioc_err(mrioc, "%s: bsg registration failed\n",
 		    dev_name(bsg_dev));
 		device_del(bsg_dev);
 		put_device(bsg_dev);
-		return;
 	}
-
-	blk_queue_max_segments(mrioc->bsg_queue, MPI3MR_MAX_APP_XFER_SEGMENTS);
-	blk_queue_max_hw_sectors(mrioc->bsg_queue, MPI3MR_MAX_APP_XFER_SECTORS);
-
-	return;
 }
 
 /**
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 5f975e0db38831..bce639a6cca173 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -986,6 +986,25 @@ static int mpi3mr_change_queue_depth(struct scsi_device *sdev,
 	return retval;
 }
 
+static void mpi3mr_configure_nvme_dev(struct mpi3mr_tgt_dev *tgt_dev,
+		struct queue_limits *lim)
+{
+	u8 pgsz = tgt_dev->dev_spec.pcie_inf.pgsz ? : MPI3MR_DEFAULT_PGSZEXP;
+
+	lim->max_hw_sectors = tgt_dev->dev_spec.pcie_inf.mdts / 512;
+	lim->virt_boundary_mask = (1 << pgsz) - 1;
+}
+
+static void mpi3mr_configure_tgt_dev(struct mpi3mr_tgt_dev *tgt_dev,
+		struct queue_limits *lim)
+{
+	if (tgt_dev->dev_type == MPI3_DEVICE_DEVFORM_PCIE &&
+	    (tgt_dev->dev_spec.pcie_inf.dev_info &
+	     MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK) ==
+			MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE)
+		mpi3mr_configure_nvme_dev(tgt_dev, lim);
+}
+
 /**
  * mpi3mr_update_sdev - Update SCSI device information
  * @sdev: SCSI device reference
@@ -1001,31 +1020,17 @@ static void
 mpi3mr_update_sdev(struct scsi_device *sdev, void *data)
 {
 	struct mpi3mr_tgt_dev *tgtdev;
+	struct queue_limits lim;
 
 	tgtdev = (struct mpi3mr_tgt_dev *)data;
 	if (!tgtdev)
 		return;
 
 	mpi3mr_change_queue_depth(sdev, tgtdev->q_depth);
-	switch (tgtdev->dev_type) {
-	case MPI3_DEVICE_DEVFORM_PCIE:
-		/*The block layer hw sector size = 512*/
-		if ((tgtdev->dev_spec.pcie_inf.dev_info &
-		    MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK) ==
-		    MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE) {
-			blk_queue_max_hw_sectors(sdev->request_queue,
-			    tgtdev->dev_spec.pcie_inf.mdts / 512);
-			if (tgtdev->dev_spec.pcie_inf.pgsz == 0)
-				blk_queue_virt_boundary(sdev->request_queue,
-				    ((1 << MPI3MR_DEFAULT_PGSZEXP) - 1));
-			else
-				blk_queue_virt_boundary(sdev->request_queue,
-				    ((1 << tgtdev->dev_spec.pcie_inf.pgsz) - 1));
-		}
-		break;
-	default:
-		break;
-	}
+
+	lim = queue_limits_start_update(sdev->request_queue);
+	mpi3mr_configure_tgt_dev(tgtdev, &lim);
+	WARN_ON_ONCE(queue_limits_commit_update(sdev->request_queue, &lim));
 }
 
 /**
@@ -1038,8 +1043,7 @@ mpi3mr_update_sdev(struct scsi_device *sdev, void *data)
  *
  * Return: Nothing.
  */
-
-void mpi3mr_refresh_tgtdevs(struct mpi3mr_ioc *mrioc)
+static void mpi3mr_refresh_tgtdevs(struct mpi3mr_ioc *mrioc)
 {
 	struct mpi3mr_tgt_dev *tgtdev, *tgtdev_next;
 	struct mpi3mr_stgt_priv_data *tgt_priv;
@@ -4393,15 +4397,17 @@ static void mpi3mr_target_destroy(struct scsi_target *starget)
 }
 
 /**
- * mpi3mr_slave_configure - Slave configure callback handler
+ * mpi3mr_device_configure - Slave configure callback handler
  * @sdev: SCSI device reference
+ * @lim: queue limits
  *
  * Configure queue depth, max hardware sectors and virt boundary
  * as required
  *
  * Return: 0 always.
  */
-static int mpi3mr_slave_configure(struct scsi_device *sdev)
+static int mpi3mr_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct scsi_target *starget;
 	struct Scsi_Host *shost;
@@ -4432,28 +4438,8 @@ static int mpi3mr_slave_configure(struct scsi_device *sdev)
 	sdev->eh_timeout = MPI3MR_EH_SCMD_TIMEOUT;
 	blk_queue_rq_timeout(sdev->request_queue, MPI3MR_SCMD_TIMEOUT);
 
-	switch (tgt_dev->dev_type) {
-	case MPI3_DEVICE_DEVFORM_PCIE:
-		/*The block layer hw sector size = 512*/
-		if ((tgt_dev->dev_spec.pcie_inf.dev_info &
-		    MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK) ==
-		    MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE) {
-			blk_queue_max_hw_sectors(sdev->request_queue,
-			    tgt_dev->dev_spec.pcie_inf.mdts / 512);
-			if (tgt_dev->dev_spec.pcie_inf.pgsz == 0)
-				blk_queue_virt_boundary(sdev->request_queue,
-				    ((1 << MPI3MR_DEFAULT_PGSZEXP) - 1));
-			else
-				blk_queue_virt_boundary(sdev->request_queue,
-				    ((1 << tgt_dev->dev_spec.pcie_inf.pgsz) - 1));
-		}
-		break;
-	default:
-		break;
-	}
-
+	mpi3mr_configure_tgt_dev(tgt_dev, lim);
 	mpi3mr_tgtdev_put(tgt_dev);
-
 	return retval;
 }
 
@@ -4921,7 +4907,7 @@ static const struct scsi_host_template mpi3mr_driver_template = {
 	.queuecommand			= mpi3mr_qcmd,
 	.target_alloc			= mpi3mr_target_alloc,
 	.slave_alloc			= mpi3mr_slave_alloc,
-	.slave_configure		= mpi3mr_slave_configure,
+	.device_configure		= mpi3mr_device_configure,
 	.target_destroy			= mpi3mr_target_destroy,
 	.slave_destroy			= mpi3mr_slave_destroy,
 	.scan_finished			= mpi3mr_scan_finished,
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index ef8ee93005eae6..89ef43a5ef862d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2497,14 +2497,15 @@ _scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
 }
 
 /**
- * scsih_slave_configure - device configure routine.
+ * scsih_device_configure - device configure routine.
  * @sdev: scsi device struct
+ * @lim: queue limits
  *
  * Return: 0 if ok. Any other return is assumed to be an error and
  * the device is ignored.
  */
 static int
-scsih_slave_configure(struct scsi_device *sdev)
+scsih_device_configure(struct scsi_device *sdev, struct queue_limits *lim)
 {
 	struct Scsi_Host *shost = sdev->host;
 	struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -2609,8 +2610,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 			    raid_device->num_pds, ds);
 
 		if (shost->max_sectors > MPT3SAS_RAID_MAX_SECTORS) {
-			blk_queue_max_hw_sectors(sdev->request_queue,
-						MPT3SAS_RAID_MAX_SECTORS);
+			lim->max_hw_sectors = MPT3SAS_RAID_MAX_SECTORS;
 			sdev_printk(KERN_INFO, sdev,
 					"Set queue's max_sector to: %u\n",
 						MPT3SAS_RAID_MAX_SECTORS);
@@ -2675,8 +2675,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 				pcie_device->connector_name);
 
 		if (pcie_device->nvme_mdts)
-			blk_queue_max_hw_sectors(sdev->request_queue,
-					pcie_device->nvme_mdts/512);
+			lim->max_hw_sectors = pcie_device->nvme_mdts / 512;
 
 		pcie_device_put(pcie_device);
 		spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
@@ -2687,8 +2686,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 		 **/
 		blk_queue_flag_set(QUEUE_FLAG_NOMERGES,
 				sdev->request_queue);
-		blk_queue_virt_boundary(sdev->request_queue,
-				ioc->page_size - 1);
+		lim->virt_boundary_mask = ioc->page_size - 1;
 		return 0;
 	}
 
@@ -11914,7 +11912,7 @@ static const struct scsi_host_template mpt2sas_driver_template = {
 	.queuecommand			= scsih_qcmd,
 	.target_alloc			= scsih_target_alloc,
 	.slave_alloc			= scsih_slave_alloc,
-	.slave_configure		= scsih_slave_configure,
+	.device_configure		= scsih_device_configure,
 	.target_destroy			= scsih_target_destroy,
 	.slave_destroy			= scsih_slave_destroy,
 	.scan_finished			= scsih_scan_finished,
@@ -11952,7 +11950,7 @@ static const struct scsi_host_template mpt3sas_driver_template = {
 	.queuecommand			= scsih_qcmd,
 	.target_alloc			= scsih_target_alloc,
 	.slave_alloc			= scsih_slave_alloc,
-	.slave_configure		= scsih_slave_configure,
+	.device_configure		= scsih_device_configure,
 	.target_destroy			= scsih_target_destroy,
 	.slave_destroy			= scsih_slave_destroy,
 	.scan_finished			= scsih_scan_finished,
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index ebd31aaa866bd3..a2a084c8075e00 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -197,8 +197,9 @@ static int pmcraid_slave_alloc(struct scsi_device *scsi_dev)
 }
 
 /**
- * pmcraid_slave_configure - Configures a SCSI device
+ * pmcraid_device_configure - Configures a SCSI device
  * @scsi_dev: scsi device struct
+ * @lim: queue limits
  *
  * This function is executed by SCSI mid layer just after a device is first
  * scanned (i.e. it has responded to an INQUIRY). For VSET resources, the
@@ -209,7 +210,8 @@ static int pmcraid_slave_alloc(struct scsi_device *scsi_dev)
  * Return value:
  *	  0 on success
  */
-static int pmcraid_slave_configure(struct scsi_device *scsi_dev)
+static int pmcraid_device_configure(struct scsi_device *scsi_dev,
+		struct queue_limits *lim)
 {
 	struct pmcraid_resource_entry *res = scsi_dev->hostdata;
 
@@ -233,8 +235,7 @@ static int pmcraid_slave_configure(struct scsi_device *scsi_dev)
 		scsi_dev->allow_restart = 1;
 		blk_queue_rq_timeout(scsi_dev->request_queue,
 				     PMCRAID_VSET_IO_TIMEOUT);
-		blk_queue_max_hw_sectors(scsi_dev->request_queue,
-				      PMCRAID_VSET_MAX_SECTORS);
+		lim->max_hw_sectors = PMCRAID_VSET_MAX_SECTORS;
 	}
 
 	/*
@@ -3668,7 +3669,7 @@ static const struct scsi_host_template pmcraid_host_template = {
 	.eh_host_reset_handler = pmcraid_eh_host_reset_handler,
 
 	.slave_alloc = pmcraid_slave_alloc,
-	.slave_configure = pmcraid_slave_configure,
+	.device_configure = pmcraid_device_configure,
 	.slave_destroy = pmcraid_slave_destroy,
 	.change_queue_depth = pmcraid_change_queue_depth,
 	.can_queue = PMCRAID_MAX_IO_CMD,
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index d592ee9170c11f..8300f0bdddb37a 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -986,12 +986,6 @@ second_pass:
 	return -ENODEV;
 }
 
-static int ppa_adjust_queue(struct scsi_device *device)
-{
-	blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
-	return 0;
-}
-
 static const struct scsi_host_template ppa_template = {
 	.module			= THIS_MODULE,
 	.proc_name		= "ppa",
@@ -1005,7 +999,6 @@ static const struct scsi_host_template ppa_template = {
 	.this_id		= -1,
 	.sg_tablesize		= SG_ALL,
 	.can_queue		= 1,
-	.slave_alloc		= ppa_adjust_queue,
 	.cmd_size		= sizeof(struct scsi_pointer),
 };
 
@@ -1111,6 +1104,7 @@ static int __ppa_attach(struct parport *pb)
 	host = scsi_host_alloc(&ppa_template, sizeof(ppa_struct *));
 	if (!host)
 		goto out1;
+	host->no_highmem = true;
 	host->io_port = pb->base;
 	host->n_io_port = ports;
 	host->dma_channel = -1;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 6a1900e96a5a5f..fcb06df2ce4e68 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1957,9 +1957,6 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
 	scsi_qla_host_t *vha = shost_priv(sdev->host);
 	struct req_que *req = vha->req;
 
-	if (IS_T10_PI_CAPABLE(vha->hw))
-		blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
-
 	scsi_change_queue_depth(sdev, req->max_q_depth);
 	return 0;
 }
@@ -3575,6 +3572,9 @@ skip_dpc:
 		    QLA_SG_ALL : 128;
 	}
 
+	if (IS_T10_PI_CAPABLE(base_vha->hw))
+		host->dma_alignment = 0x7;
+
 	ret = scsi_add_host(host, &pdev->dev);
 	if (ret)
 		goto probe_failed;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 967b6d62bb37e1..ec39acc986d6ec 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -32,7 +32,7 @@
 #include <scsi/scsi_driver.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_host.h>
-#include <scsi/scsi_transport.h> /* __scsi_init_queue() */
+#include <scsi/scsi_transport.h> /* scsi_init_limits() */
 #include <scsi/scsi_dh.h>
 
 #include <trace/events/scsi.h>
@@ -1963,42 +1963,36 @@ static void scsi_map_queues(struct blk_mq_tag_set *set)
 	blk_mq_map_queues(&set->map[HCTX_TYPE_DEFAULT]);
 }
 
-void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q)
+void scsi_init_limits(struct Scsi_Host *shost, struct queue_limits *lim)
 {
 	struct device *dev = shost->dma_dev;
 
-	/*
-	 * this limit is imposed by hardware restrictions
-	 */
-	blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize,
-					SG_MAX_SEGMENTS));
+	memset(lim, 0, sizeof(*lim));
+	lim->max_segments =
+		min_t(unsigned short, shost->sg_tablesize, SG_MAX_SEGMENTS);
 
 	if (scsi_host_prot_dma(shost)) {
 		shost->sg_prot_tablesize =
 			min_not_zero(shost->sg_prot_tablesize,
 				     (unsigned short)SCSI_MAX_PROT_SG_SEGMENTS);
 		BUG_ON(shost->sg_prot_tablesize < shost->sg_tablesize);
-		blk_queue_max_integrity_segments(q, shost->sg_prot_tablesize);
+		lim->max_integrity_segments = shost->sg_prot_tablesize;
 	}
 
-	blk_queue_max_hw_sectors(q, shost->max_sectors);
-	blk_queue_segment_boundary(q, shost->dma_boundary);
-	dma_set_seg_boundary(dev, shost->dma_boundary);
+	lim->max_hw_sectors = shost->max_sectors;
+	lim->seg_boundary_mask = shost->dma_boundary;
+	lim->max_segment_size = shost->max_segment_size;
+	lim->virt_boundary_mask = shost->virt_boundary_mask;
+	lim->dma_alignment = max_t(unsigned int,
+		shost->dma_alignment, dma_get_cache_alignment() - 1);
 
-	blk_queue_max_segment_size(q, shost->max_segment_size);
-	blk_queue_virt_boundary(q, shost->virt_boundary_mask);
-	dma_set_max_seg_size(dev, queue_max_segment_size(q));
+	if (shost->no_highmem)
+		lim->bounce = BLK_BOUNCE_HIGH;
 
-	/*
-	 * Set a reasonable default alignment:  The larger of 32-byte (dword),
-	 * which is a common minimum for HBAs, and the minimum DMA alignment,
-	 * which is set by the platform.
-	 *
-	 * Devices that require a bigger alignment can increase it later.
-	 */
-	blk_queue_dma_alignment(q, max(4, dma_get_cache_alignment()) - 1);
+	dma_set_seg_boundary(dev, shost->dma_boundary);
+	dma_set_max_seg_size(dev, shost->max_segment_size);
 }
-EXPORT_SYMBOL_GPL(__scsi_init_queue);
+EXPORT_SYMBOL_GPL(scsi_init_limits);
 
 static const struct blk_mq_ops scsi_mq_ops_no_commit = {
 	.get_budget	= scsi_mq_get_budget,
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index ffd7e7e72933c5..8300fc28cb10a8 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -227,7 +227,7 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev,
 
 	/*
 	 * realloc if new shift is calculated, which is caused by setting
-	 * up one new default queue depth after calling ->slave_configure
+	 * up one new default queue depth after calling ->device_configure
 	 */
 	if (!need_alloc && new_shift != sdev->budget_map.shift)
 		need_alloc = need_free = true;
@@ -283,6 +283,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	struct request_queue *q;
 	int display_failure_msg = 1, ret;
 	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+	struct queue_limits lim;
 
 	sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
 		       GFP_KERNEL);
@@ -332,7 +333,8 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 
 	sdev->sg_reserved_size = INT_MAX;
 
-	q = blk_mq_alloc_queue(&sdev->host->tag_set, NULL, NULL);
+	scsi_init_limits(shost, &lim);
+	q = blk_mq_alloc_queue(&sdev->host->tag_set, &lim, NULL);
 	if (IS_ERR(q)) {
 		/* release fn is set up in scsi_sysfs_device_initialise, so
 		 * have to free and put manually here */
@@ -343,7 +345,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	kref_get(&sdev->host->tagset_refcnt);
 	sdev->request_queue = q;
 	q->queuedata = sdev;
-	__scsi_init_queue(sdev->host, q);
 
 	depth = sdev->host->cmd_per_lun ?: 1;
 
@@ -873,6 +874,8 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 		blist_flags_t *bflags, int async)
 {
+	const struct scsi_host_template *hostt = sdev->host->hostt;
+	struct queue_limits lim;
 	int ret;
 
 	/*
@@ -1004,19 +1007,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 		sdev->select_no_atn = 1;
 
 	/*
-	 * Maximum 512 sector transfer length
-	 * broken RA4x00 Compaq Disk Array
-	 */
-	if (*bflags & BLIST_MAX_512)
-		blk_queue_max_hw_sectors(sdev->request_queue, 512);
-	/*
-	 * Max 1024 sector transfer length for targets that report incorrect
-	 * max/optimal lengths and relied on the old block layer safe default
-	 */
-	else if (*bflags & BLIST_MAX_1024)
-		blk_queue_max_hw_sectors(sdev->request_queue, 1024);
-
-	/*
 	 * Some devices may not want to have a start command automatically
 	 * issued when a device is added.
 	 */
@@ -1076,28 +1066,46 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 
 	transport_configure_device(&sdev->sdev_gendev);
 
-	if (sdev->host->hostt->slave_configure) {
-		ret = sdev->host->hostt->slave_configure(sdev);
-		if (ret) {
-			/*
-			 * if LLDD reports slave not present, don't clutter
-			 * console with alloc failure messages
-			 */
-			if (ret != -ENXIO) {
-				sdev_printk(KERN_ERR, sdev,
-					"failed to configure device\n");
-			}
-			return SCSI_SCAN_NO_RESPONSE;
-		}
+	/*
+	 * No need to freeze the queue as it isn't reachable to anyone else yet.
+	 */
+	lim = queue_limits_start_update(sdev->request_queue);
+	if (*bflags & BLIST_MAX_512)
+		lim.max_hw_sectors = 512;
+	else if (*bflags & BLIST_MAX_1024)
+		lim.max_hw_sectors = 1024;
 
+	if (hostt->device_configure)
+		ret = hostt->device_configure(sdev, &lim);
+	else if (hostt->slave_configure)
+		ret = hostt->slave_configure(sdev);
+	if (ret) {
+		queue_limits_cancel_update(sdev->request_queue);
 		/*
-		 * The queue_depth is often changed in ->slave_configure.
-		 * Set up budget map again since memory consumption of
-		 * the map depends on actual queue depth.
+		 * If the LLDD reports device not present, don't clutter the
+		 * console with failure messages.
 		 */
-		scsi_realloc_sdev_budget_map(sdev, sdev->queue_depth);
+		if (ret != -ENXIO)
+			sdev_printk(KERN_ERR, sdev,
+				"failed to configure device\n");
+		return SCSI_SCAN_NO_RESPONSE;
 	}
 
+	ret = queue_limits_commit_update(sdev->request_queue, &lim);
+	if (ret) {
+		sdev_printk(KERN_ERR, sdev, "failed to apply queue limits.\n");
+		return SCSI_SCAN_NO_RESPONSE;
+	}
+
+	/*
+	 * The queue_depth is often changed in ->device_configure.
+	 *
+	 * Set up budget map again since memory consumption of the map depends
+	 * on actual queue depth.
+	 */
+	if (hostt->device_configure || hostt->slave_configure)
+		scsi_realloc_sdev_budget_map(sdev, sdev->queue_depth);
+
 	if (sdev->scsi_level >= SCSI_3)
 		scsi_attach_vpd(sdev);
 
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index b04075f19445dc..7d088b8da07578 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -4276,6 +4276,7 @@ fc_bsg_hostadd(struct Scsi_Host *shost, struct fc_host_attrs *fc_host)
 {
 	struct device *dev = &shost->shost_gendev;
 	struct fc_internal *i = to_fc_internal(shost->transportt);
+	struct queue_limits lim;
 	struct request_queue *q;
 	char bsg_name[20];
 
@@ -4286,16 +4287,16 @@ fc_bsg_hostadd(struct Scsi_Host *shost, struct fc_host_attrs *fc_host)
 
 	snprintf(bsg_name, sizeof(bsg_name),
 		 "fc_host%d", shost->host_no);
-
-	q = bsg_setup_queue(dev, bsg_name, fc_bsg_dispatch, fc_bsg_job_timeout,
-				i->f->dd_bsg_size);
+	scsi_init_limits(shost, &lim);
+	lim.max_segments = min_not_zero(lim.max_segments, i->f->max_bsg_segments);
+	q = bsg_setup_queue(dev, bsg_name, &lim, fc_bsg_dispatch,
+			fc_bsg_job_timeout, i->f->dd_bsg_size);
 	if (IS_ERR(q)) {
 		dev_err(dev,
 			"fc_host%d: bsg interface failed to initialize - setup queue\n",
 			shost->host_no);
 		return PTR_ERR(q);
 	}
-	__scsi_init_queue(shost, q);
 	blk_queue_rq_timeout(q, FC_DEFAULT_BSG_TIMEOUT);
 	fc_host->rqst_q = q;
 	return 0;
@@ -4311,6 +4312,7 @@ fc_bsg_rportadd(struct Scsi_Host *shost, struct fc_rport *rport)
 {
 	struct device *dev = &rport->dev;
 	struct fc_internal *i = to_fc_internal(shost->transportt);
+	struct queue_limits lim;
 	struct request_queue *q;
 
 	rport->rqst_q = NULL;
@@ -4318,13 +4320,14 @@ fc_bsg_rportadd(struct Scsi_Host *shost, struct fc_rport *rport)
 	if (!i->f->bsg_request)
 		return -ENOTSUPP;
 
-	q = bsg_setup_queue(dev, dev_name(dev), fc_bsg_dispatch_prep,
+	scsi_init_limits(shost, &lim);
+	lim.max_segments = min_not_zero(lim.max_segments, i->f->max_bsg_segments);
+	q = bsg_setup_queue(dev, dev_name(dev), &lim, fc_bsg_dispatch_prep,
 				fc_bsg_job_timeout, i->f->dd_bsg_size);
 	if (IS_ERR(q)) {
 		dev_err(dev, "failed to setup bsg queue\n");
 		return PTR_ERR(q);
 	}
-	__scsi_init_queue(shost, q);
 	blk_queue_rq_timeout(q, BLK_DEFAULT_SG_TIMEOUT);
 	rport->rqst_q = q;
 	return 0;
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index af3ac6346796ba..5e1bb488da15c0 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1535,6 +1535,7 @@ iscsi_bsg_host_add(struct Scsi_Host *shost, struct iscsi_cls_host *ihost)
 {
 	struct device *dev = &shost->shost_gendev;
 	struct iscsi_internal *i = to_iscsi_internal(shost->transportt);
+	struct queue_limits lim;
 	struct request_queue *q;
 	char bsg_name[20];
 
@@ -1542,13 +1543,14 @@ iscsi_bsg_host_add(struct Scsi_Host *shost, struct iscsi_cls_host *ihost)
 		return -ENOTSUPP;
 
 	snprintf(bsg_name, sizeof(bsg_name), "iscsi_host%d", shost->host_no);
-	q = bsg_setup_queue(dev, bsg_name, iscsi_bsg_host_dispatch, NULL, 0);
+	scsi_init_limits(shost, &lim);
+	q = bsg_setup_queue(dev, bsg_name, &lim, iscsi_bsg_host_dispatch, NULL,
+			0);
 	if (IS_ERR(q)) {
 		shost_printk(KERN_ERR, shost, "bsg interface failed to "
 			     "initialize - no request queue\n");
 		return PTR_ERR(q);
 	}
-	__scsi_init_queue(shost, q);
 
 	ihost->bsg_q = q;
 	return 0;
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index d704c484a251c5..424a89513814b4 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -197,7 +197,7 @@ static int sas_bsg_initialize(struct Scsi_Host *shost, struct sas_rphy *rphy)
 	}
 
 	if (rphy) {
-		q = bsg_setup_queue(&rphy->dev, dev_name(&rphy->dev),
+		q = bsg_setup_queue(&rphy->dev, dev_name(&rphy->dev), NULL,
 				sas_smp_dispatch, NULL, 0);
 		if (IS_ERR(q))
 			return PTR_ERR(q);
@@ -206,7 +206,7 @@ static int sas_bsg_initialize(struct Scsi_Host *shost, struct sas_rphy *rphy)
 		char name[20];
 
 		snprintf(name, sizeof(name), "sas_host%d", shost->host_no);
-		q = bsg_setup_queue(&shost->shost_gendev, name,
+		q = bsg_setup_queue(&shost->shost_gendev, name, NULL,
 				sas_smp_dispatch, NULL, 0);
 		if (IS_ERR(q))
 			return PTR_ERR(q);
diff --git a/drivers/staging/rts5208/rtsx.c b/drivers/staging/rts5208/rtsx.c
index 86d32e3b3282a5..c4f54c311d0549 100644
--- a/drivers/staging/rts5208/rtsx.c
+++ b/drivers/staging/rts5208/rtsx.c
@@ -70,18 +70,6 @@ static int slave_alloc(struct scsi_device *sdev)
 
 static int slave_configure(struct scsi_device *sdev)
 {
-	/*
-	 * Scatter-gather buffers (all but the last) must have a length
-	 * divisible by the bulk maxpacket size.  Otherwise a data packet
-	 * would end up being short, causing a premature end to the data
-	 * transfer.  Since high-speed bulk pipes have a maxpacket size
-	 * of 512, we'll use that as the scsi device queue's DMA alignment
-	 * mask.  Guaranteeing proper alignment of the first buffer will
-	 * have the desired effect because, except at the beginning and
-	 * the end, scatter-gather buffers follow page boundaries.
-	 */
-	blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
-
 	/* Set the SCSI level to at least 2.  We'll leave it at 3 if that's
 	 * what is originally reported.  We need this to avoid confusing
 	 * the SCSI layer with devices that report 0 or 1, but need 10-byte
@@ -219,6 +207,18 @@ static const struct scsi_host_template rtsx_host_template = {
 	/* limit the total size of a transfer to 120 KB */
 	.max_sectors =                  240,
 
+	/*
+	 * Scatter-gather buffers (all but the last) must have a length
+	 * divisible by the bulk maxpacket size.  Otherwise a data packet
+	 * would end up being short, causing a premature end to the data
+	 * transfer.  Since high-speed bulk pipes have a maxpacket size
+	 * of 512, we'll use that as the scsi device queue's DMA alignment
+	 * mask.  Guaranteeing proper alignment of the first buffer will
+	 * have the desired effect because, except at the beginning and
+	 * the end, scatter-gather buffers follow page boundaries.
+	 */
+	.dma_alignment =		511,
+
 	/* emulated HBA */
 	.emulated =			1,
 
diff --git a/drivers/ufs/core/ufs_bsg.c b/drivers/ufs/core/ufs_bsg.c
index 374e5aae4e7e86..433d0480391ea6 100644
--- a/drivers/ufs/core/ufs_bsg.c
+++ b/drivers/ufs/core/ufs_bsg.c
@@ -253,7 +253,8 @@ int ufs_bsg_probe(struct ufs_hba *hba)
 	if (ret)
 		goto out;
 
-	q = bsg_setup_queue(bsg_dev, dev_name(bsg_dev), ufs_bsg_request, NULL, 0);
+	q = bsg_setup_queue(bsg_dev, dev_name(bsg_dev), NULL, ufs_bsg_request,
+			NULL, 0);
 	if (IS_ERR(q)) {
 		ret = PTR_ERR(q);
 		goto out;
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index e57a1dc8a78228..0cf07194bbe89d 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -748,8 +748,6 @@ static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
  */
 static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba)
 {
-	if (hba->ufs_version == ufshci_version(1, 0))
-		return INTERRUPT_MASK_ALL_VER_10;
 	if (hba->ufs_version <= ufshci_version(2, 0))
 		return INTERRUPT_MASK_ALL_VER_11;
 
@@ -990,30 +988,6 @@ bool ufshcd_is_hba_active(struct ufs_hba *hba)
 }
 EXPORT_SYMBOL_GPL(ufshcd_is_hba_active);
 
-u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba)
-{
-	/* HCI version 1.0 and 1.1 supports UniPro 1.41 */
-	if (hba->ufs_version <= ufshci_version(1, 1))
-		return UFS_UNIPRO_VER_1_41;
-	else
-		return UFS_UNIPRO_VER_1_6;
-}
-EXPORT_SYMBOL(ufshcd_get_local_unipro_ver);
-
-static bool ufshcd_is_unipro_pa_params_tuning_req(struct ufs_hba *hba)
-{
-	/*
-	 * If both host and device support UniPro ver1.6 or later, PA layer
-	 * parameters tuning happens during link startup itself.
-	 *
-	 * We can manually tune PA layer parameters if either host or device
-	 * doesn't support UniPro ver 1.6 or later. But to keep manual tuning
-	 * logic simple, we will only do manual tuning if local unipro version
-	 * doesn't support ver1.6 or later.
-	 */
-	return ufshcd_get_local_unipro_ver(hba) < UFS_UNIPRO_VER_1_6;
-}
-
 /**
  * ufshcd_pm_qos_init - initialize PM QoS request
  * @hba: per adapter instance
@@ -2674,14 +2648,7 @@ static void ufshcd_enable_intr(struct ufs_hba *hba, u32 intrs)
 {
 	u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
 
-	if (hba->ufs_version == ufshci_version(1, 0)) {
-		u32 rw;
-		rw = set & INTERRUPT_MASK_RW_VER_10;
-		set = rw | ((set ^ intrs) & intrs);
-	} else {
-		set |= intrs;
-	}
-
+	set |= intrs;
 	ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE);
 }
 
@@ -2694,16 +2661,7 @@ static void ufshcd_disable_intr(struct ufs_hba *hba, u32 intrs)
 {
 	u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
 
-	if (hba->ufs_version == ufshci_version(1, 0)) {
-		u32 rw;
-		rw = (set & INTERRUPT_MASK_RW_VER_10) &
-			~(intrs & INTERRUPT_MASK_RW_VER_10);
-		set = rw | ((set & intrs) & ~INTERRUPT_MASK_RW_VER_10);
-
-	} else {
-		set &= ~intrs;
-	}
-
+	set &= ~intrs;
 	ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE);
 }
 
@@ -2715,21 +2673,17 @@ static void ufshcd_disable_intr(struct ufs_hba *hba, u32 intrs)
  * @upiu_flags: flags required in the header
  * @cmd_dir: requests data direction
  * @ehs_length: Total EHS Length (in 32‐bytes units of all Extra Header Segments)
- * @legacy_type: UTP_CMD_TYPE_SCSI or UTP_CMD_TYPE_DEV_MANAGE
  */
 static void
 ufshcd_prepare_req_desc_hdr(struct ufs_hba *hba, struct ufshcd_lrb *lrbp,
 			    u8 *upiu_flags, enum dma_data_direction cmd_dir,
-			    int ehs_length, enum utp_cmd_type legacy_type)
+			    int ehs_length)
 {
 	struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr;
 	struct request_desc_header *h = &req_desc->header;
 	enum utp_data_direction data_direction;
 
-	if (hba->ufs_version <= ufshci_version(1, 1))
-		lrbp->command_type = legacy_type;
-	else
-		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
+	lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
 
 	*h = (typeof(*h)){ };
 
@@ -2863,7 +2817,7 @@ static int ufshcd_compose_devman_upiu(struct ufs_hba *hba,
 	u8 upiu_flags;
 	int ret = 0;
 
-	ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, DMA_NONE, 0, UTP_CMD_TYPE_DEV_MANAGE);
+	ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, DMA_NONE, 0);
 
 	if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY)
 		ufshcd_prepare_utp_query_req_upiu(hba, lrbp, upiu_flags);
@@ -2887,8 +2841,7 @@ static void ufshcd_comp_scsi_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 	unsigned int ioprio_class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq));
 	u8 upiu_flags;
 
-	ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags,
-				    lrbp->cmd->sc_data_direction, 0, UTP_CMD_TYPE_SCSI);
+	ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, lrbp->cmd->sc_data_direction, 0);
 	if (ioprio_class == IOPRIO_CLASS_RT)
 		upiu_flags |= UPIU_CMD_FLAGS_CP;
 	ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
@@ -3088,16 +3041,7 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
  */
 bool ufshcd_cmd_inflight(struct scsi_cmnd *cmd)
 {
-	struct request *rq;
-
-	if (!cmd)
-		return false;
-
-	rq = scsi_cmd_to_rq(cmd);
-	if (!blk_mq_request_started(rq))
-		return false;
-
-	return true;
+	return cmd && blk_mq_rq_state(scsi_cmd_to_rq(cmd)) == MQ_RQ_IN_FLIGHT;
 }
 
 /*
@@ -5276,9 +5220,6 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
 	 */
 	sdev->silence_suspend = 1;
 
-	if (hba->vops && hba->vops->config_scsi_dev)
-		hba->vops->config_scsi_dev(sdev);
-
 	ufshcd_crypto_register(hba, q);
 
 	return 0;
@@ -5561,15 +5502,12 @@ void ufshcd_compl_one_cqe(struct ufs_hba *hba, int task_tag,
 		ufshcd_release_scsi_cmd(hba, lrbp);
 		/* Do not touch lrbp after scsi done */
 		scsi_done(cmd);
-	} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE ||
-		   lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) {
-		if (hba->dev_cmd.complete) {
-			if (cqe) {
-				ocs = le32_to_cpu(cqe->status) & MASK_OCS;
-				lrbp->utr_descriptor_ptr->header.ocs = ocs;
-			}
-			complete(hba->dev_cmd.complete);
+	} else if (hba->dev_cmd.complete) {
+		if (cqe) {
+			ocs = le32_to_cpu(cqe->status) & MASK_OCS;
+			lrbp->utr_descriptor_ptr->header.ocs = ocs;
 		}
+		complete(hba->dev_cmd.complete);
 	}
 }
 
@@ -7222,7 +7160,7 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
 
 	ufshcd_setup_dev_cmd(hba, lrbp, cmd_type, 0, tag);
 
-	ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, DMA_NONE, 0, UTP_CMD_TYPE_DEV_MANAGE);
+	ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, DMA_NONE, 0);
 
 	/* update the task tag in the request upiu */
 	req_upiu->header.task_tag = tag;
@@ -7374,7 +7312,7 @@ int ufshcd_advanced_rpmb_req_handler(struct ufs_hba *hba, struct utp_upiu_req *r
 
 	ufshcd_setup_dev_cmd(hba, lrbp, DEV_CMD_TYPE_RPMB, UFS_UPIU_RPMB_WLUN, tag);
 
-	ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, DMA_NONE, ehs, UTP_CMD_TYPE_DEV_MANAGE);
+	ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, DMA_NONE, ehs);
 
 	/* update the task tag */
 	req_upiu->header.task_tag = tag;
@@ -8362,83 +8300,6 @@ static void ufs_put_device_desc(struct ufs_hba *hba)
 }
 
 /**
- * ufshcd_tune_pa_tactivate - Tunes PA_TActivate of local UniPro
- * @hba: per-adapter instance
- *
- * PA_TActivate parameter can be tuned manually if UniPro version is less than
- * 1.61. PA_TActivate needs to be greater than or equal to peerM-PHY's
- * RX_MIN_ACTIVATETIME_CAPABILITY attribute. This optimal value can help reduce
- * the hibern8 exit latency.
- *
- * Return: zero on success, non-zero error value on failure.
- */
-static int ufshcd_tune_pa_tactivate(struct ufs_hba *hba)
-{
-	int ret = 0;
-	u32 peer_rx_min_activatetime = 0, tuned_pa_tactivate;
-
-	ret = ufshcd_dme_peer_get(hba,
-				  UIC_ARG_MIB_SEL(
-					RX_MIN_ACTIVATETIME_CAPABILITY,
-					UIC_ARG_MPHY_RX_GEN_SEL_INDEX(0)),
-				  &peer_rx_min_activatetime);
-	if (ret)
-		goto out;
-
-	/* make sure proper unit conversion is applied */
-	tuned_pa_tactivate =
-		((peer_rx_min_activatetime * RX_MIN_ACTIVATETIME_UNIT_US)
-		 / PA_TACTIVATE_TIME_UNIT_US);
-	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE),
-			     tuned_pa_tactivate);
-
-out:
-	return ret;
-}
-
-/**
- * ufshcd_tune_pa_hibern8time - Tunes PA_Hibern8Time of local UniPro
- * @hba: per-adapter instance
- *
- * PA_Hibern8Time parameter can be tuned manually if UniPro version is less than
- * 1.61. PA_Hibern8Time needs to be maximum of local M-PHY's
- * TX_HIBERN8TIME_CAPABILITY & peer M-PHY's RX_HIBERN8TIME_CAPABILITY.
- * This optimal value can help reduce the hibern8 exit latency.
- *
- * Return: zero on success, non-zero error value on failure.
- */
-static int ufshcd_tune_pa_hibern8time(struct ufs_hba *hba)
-{
-	int ret = 0;
-	u32 local_tx_hibern8_time_cap = 0, peer_rx_hibern8_time_cap = 0;
-	u32 max_hibern8_time, tuned_pa_hibern8time;
-
-	ret = ufshcd_dme_get(hba,
-			     UIC_ARG_MIB_SEL(TX_HIBERN8TIME_CAPABILITY,
-					UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
-				  &local_tx_hibern8_time_cap);
-	if (ret)
-		goto out;
-
-	ret = ufshcd_dme_peer_get(hba,
-				  UIC_ARG_MIB_SEL(RX_HIBERN8TIME_CAPABILITY,
-					UIC_ARG_MPHY_RX_GEN_SEL_INDEX(0)),
-				  &peer_rx_hibern8_time_cap);
-	if (ret)
-		goto out;
-
-	max_hibern8_time = max(local_tx_hibern8_time_cap,
-			       peer_rx_hibern8_time_cap);
-	/* make sure proper unit conversion is applied */
-	tuned_pa_hibern8time = ((max_hibern8_time * HIBERN8TIME_UNIT_US)
-				/ PA_HIBERN8_TIME_UNIT_US);
-	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HIBERN8TIME),
-			     tuned_pa_hibern8time);
-out:
-	return ret;
-}
-
-/**
  * ufshcd_quirk_tune_host_pa_tactivate - Ensures that host PA_TACTIVATE is
  * less than device PA_TACTIVATE time.
  * @hba: per-adapter instance
@@ -8510,11 +8371,6 @@ out:
 
 static void ufshcd_tune_unipro_params(struct ufs_hba *hba)
 {
-	if (ufshcd_is_unipro_pa_params_tuning_req(hba)) {
-		ufshcd_tune_pa_tactivate(hba);
-		ufshcd_tune_pa_hibern8time(hba);
-	}
-
 	ufshcd_vops_apply_dev_quirks(hba);
 
 	if (hba->dev_quirks & UFS_DEVICE_QUIRK_PA_TACTIVATE)
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 734d40f99e31e6..e8d3302f6df080 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -1187,6 +1187,8 @@ static int exynos_ufs_init(struct ufs_hba *hba)
 		goto out;
 	exynos_ufs_specify_phy_time_attr(ufs);
 	exynos_ufs_config_smu(ufs);
+
+	hba->host->dma_alignment = SZ_4K - 1;
 	return 0;
 
 out:
@@ -1510,11 +1512,6 @@ static int fsd_ufs_pre_link(struct exynos_ufs *ufs)
 	return 0;
 }
 
-static void exynos_ufs_config_scsi_dev(struct scsi_device *sdev)
-{
-	blk_queue_update_dma_alignment(sdev->request_queue, SZ_4K - 1);
-}
-
 static int fsd_ufs_post_link(struct exynos_ufs *ufs)
 {
 	int i;
@@ -1583,7 +1580,6 @@ static const struct ufs_hba_variant_ops ufs_hba_exynos_ops = {
 	.hibern8_notify			= exynos_ufs_hibern8_notify,
 	.suspend			= exynos_ufs_suspend,
 	.resume				= exynos_ufs_resume,
-	.config_scsi_dev		= exynos_ufs_config_scsi_dev,
 };
 
 static struct ufs_hba_variant_ops ufs_hba_exynosauto_vh_ops = {
@@ -1748,6 +1744,7 @@ static const struct of_device_id exynos_ufs_of_match[] = {
 	  .data       = &fsd_ufs_drvs },
 	{},
 };
+MODULE_DEVICE_TABLE(of, exynos_ufs_of_match);
 
 static const struct dev_pm_ops exynos_ufs_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume)
diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c
index 0b0c923b1d7b9b..c4f997196c57af 100644
--- a/drivers/ufs/host/ufs-mediatek.c
+++ b/drivers/ufs/host/ufs-mediatek.c
@@ -52,6 +52,7 @@ static const struct of_device_id ufs_mtk_of_match[] = {
 	{ .compatible = "mediatek,mt8183-ufshci" },
 	{},
 };
+MODULE_DEVICE_TABLE(of, ufs_mtk_of_match);
 
 /*
  * Details of UIC Errors
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 0c067d56305c08..cca190d1c577e9 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -534,8 +534,7 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 		 * and device TX LCC are disabled once link startup is
 		 * completed.
 		 */
-		if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41)
-			err = ufshcd_disable_host_tx_lcc(hba);
+		err = ufshcd_disable_host_tx_lcc(hba);
 
 		break;
 	default:
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 8c8fa71c69c411..9f758241d9d376 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -328,12 +328,6 @@ static int mts_slave_alloc (struct scsi_device *s)
 	return 0;
 }
 
-static int mts_slave_configure (struct scsi_device *s)
-{
-	blk_queue_dma_alignment(s->request_queue, (512 - 1));
-	return 0;
-}
-
 static int mts_scsi_abort(struct scsi_cmnd *srb)
 {
 	struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
@@ -631,8 +625,8 @@ static const struct scsi_host_template mts_scsi_host_template = {
 	.can_queue =		1,
 	.this_id =		-1,
 	.emulated =		1,
+	.dma_alignment =	511,
 	.slave_alloc =		mts_slave_alloc,
-	.slave_configure =	mts_slave_configure,
 	.max_sectors=		256, /* 128 K */
 };
 
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 12cf9940e5b675..b31464740f6c86 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -40,7 +40,6 @@
 #include <scsi/scsi_eh.h>
 
 #include "usb.h"
-#include <linux/usb/hcd.h>
 #include "scsiglue.h"
 #include "debug.h"
 #include "transport.h"
@@ -76,12 +75,6 @@ static int slave_alloc (struct scsi_device *sdev)
 	 */
 	sdev->inquiry_len = 36;
 
-	/*
-	 * Some host controllers may have alignment requirements.
-	 * We'll play it safe by requiring 512-byte alignment always.
-	 */
-	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
-
 	/* Tell the SCSI layer if we know there is more than one LUN */
 	if (us->protocol == USB_PR_BULK && us->max_lun > 0)
 		sdev->sdev_bflags |= BLIST_FORCELUN;
@@ -89,7 +82,7 @@ static int slave_alloc (struct scsi_device *sdev)
 	return 0;
 }
 
-static int slave_configure(struct scsi_device *sdev)
+static int device_configure(struct scsi_device *sdev, struct queue_limits *lim)
 {
 	struct us_data *us = host_to_us(sdev->host);
 	struct device *dev = us->pusb_dev->bus->sysdev;
@@ -104,40 +97,28 @@ static int slave_configure(struct scsi_device *sdev)
 
 		if (us->fflags & US_FL_MAX_SECTORS_MIN)
 			max_sectors = PAGE_SIZE >> 9;
-		if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
-			blk_queue_max_hw_sectors(sdev->request_queue,
-					      max_sectors);
+		lim->max_hw_sectors = min(lim->max_hw_sectors, max_sectors);
 	} else if (sdev->type == TYPE_TAPE) {
 		/*
 		 * Tapes need much higher max_sector limits, so just
 		 * raise it to the maximum possible (4 GB / 512) and
 		 * let the queue segment size sort out the real limit.
 		 */
-		blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
+		lim->max_hw_sectors = 0x7FFFFF;
 	} else if (us->pusb_dev->speed >= USB_SPEED_SUPER) {
 		/*
 		 * USB3 devices will be limited to 2048 sectors. This gives us
 		 * better throughput on most devices.
 		 */
-		blk_queue_max_hw_sectors(sdev->request_queue, 2048);
+		lim->max_hw_sectors = 2048;
 	}
 
 	/*
 	 * The max_hw_sectors should be up to maximum size of a mapping for
 	 * the device. Otherwise, a DMA API might fail on swiotlb environment.
 	 */
-	blk_queue_max_hw_sectors(sdev->request_queue,
-		min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
-		      dma_max_mapping_size(dev) >> SECTOR_SHIFT));
-
-	/*
-	 * Some USB host controllers can't do DMA; they have to use PIO.
-	 * For such controllers we need to make sure the block layer sets
-	 * up bounce buffers in addressable memory.
-	 */
-	if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
-			(bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL))
-		blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
+	lim->max_hw_sectors = min_t(size_t,
+		lim->max_hw_sectors, dma_max_mapping_size(dev) >> SECTOR_SHIFT);
 
 	/*
 	 * We can't put these settings in slave_alloc() because that gets
@@ -598,13 +579,22 @@ static ssize_t max_sectors_store(struct device *dev, struct device_attribute *at
 		size_t count)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
+	struct queue_limits lim;
 	unsigned short ms;
+	int ret;
 
-	if (sscanf(buf, "%hu", &ms) > 0) {
-		blk_queue_max_hw_sectors(sdev->request_queue, ms);
-		return count;
-	}
-	return -EINVAL;
+	if (sscanf(buf, "%hu", &ms) <= 0)
+		return -EINVAL;
+
+	blk_mq_freeze_queue(sdev->request_queue);
+	lim = queue_limits_start_update(sdev->request_queue);
+	lim.max_hw_sectors = ms;
+	ret = queue_limits_commit_update(sdev->request_queue, &lim);
+	blk_mq_unfreeze_queue(sdev->request_queue);
+
+	if (ret)
+		return ret;
+	return count;
 }
 static DEVICE_ATTR_RW(max_sectors);
 
@@ -642,12 +632,17 @@ static const struct scsi_host_template usb_stor_host_template = {
 	.this_id =			-1,
 
 	.slave_alloc =			slave_alloc,
-	.slave_configure =		slave_configure,
+	.device_configure =		device_configure,
 	.target_alloc =			target_alloc,
 
 	/* lots of sg segments can be handled */
 	.sg_tablesize =			SG_MAX_SEGMENTS,
 
+	/*
+	 * Some host controllers may have alignment requirements.
+	 * We'll play it safe by requiring 512-byte alignment always.
+	 */
+	.dma_alignment =		511,
 
 	/*
 	 * Limit the total size of a transfer to 120 KB.
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 08953f0d4532aa..a48870a87a293c 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -821,26 +821,19 @@ static int uas_slave_alloc(struct scsi_device *sdev)
 		(struct uas_dev_info *)sdev->host->hostdata;
 
 	sdev->hostdata = devinfo;
-
-	/*
-	 * The protocol has no requirements on alignment in the strict sense.
-	 * Controllers may or may not have alignment restrictions.
-	 * As this is not exported, we use an extremely conservative guess.
-	 */
-	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
-
-	if (devinfo->flags & US_FL_MAX_SECTORS_64)
-		blk_queue_max_hw_sectors(sdev->request_queue, 64);
-	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
-		blk_queue_max_hw_sectors(sdev->request_queue, 240);
-
 	return 0;
 }
 
-static int uas_slave_configure(struct scsi_device *sdev)
+static int uas_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct uas_dev_info *devinfo = sdev->hostdata;
 
+	if (devinfo->flags & US_FL_MAX_SECTORS_64)
+		lim->max_hw_sectors = 64;
+	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
+		lim->max_hw_sectors = 240;
+
 	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
 		sdev->no_report_opcodes = 1;
 
@@ -905,11 +898,17 @@ static const struct scsi_host_template uas_host_template = {
 	.queuecommand = uas_queuecommand,
 	.target_alloc = uas_target_alloc,
 	.slave_alloc = uas_slave_alloc,
-	.slave_configure = uas_slave_configure,
+	.device_configure = uas_device_configure,
 	.eh_abort_handler = uas_eh_abort_handler,
 	.eh_device_reset_handler = uas_eh_device_reset_handler,
 	.this_id = -1,
 	.skip_settle_delay = 1,
+	/*
+	 * The protocol has no requirements on alignment in the strict sense.
+	 * Controllers may or may not have alignment restrictions.
+	 * As this is not exported, we use an extremely conservative guess.
+	 */
+	.dma_alignment = 511,
 	.dma_boundary = PAGE_SIZE - 1,
 	.cmd_size = sizeof(struct uas_cmd_info),
 };
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index d1ad6a2509ab7f..a49a31639f6f0c 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -47,6 +47,7 @@
 #include <scsi/scsi_device.h>
 
 #include "usb.h"
+#include <linux/usb/hcd.h>
 #include "scsiglue.h"
 #include "transport.h"
 #include "protocol.h"
@@ -961,6 +962,15 @@ int usb_stor_probe1(struct us_data **pus,
 	if (result)
 		goto BadDevice;
 
+	/*
+	 * Some USB host controllers can't do DMA; they have to use PIO.
+	 * For such controllers we need to make sure the block layer sets
+	 * up bounce buffers in addressable memory.
+	 */
+	if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
+	    bus_to_hcd(us->pusb_dev->bus)->localmem_pool)
+		host->no_highmem = true;
+
 	/* Get the unusual_devs entries and the descriptors */
 	result = get_device_info(us, id, unusual_dev);
 	if (result)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 91db3e977108be..54e9d50b41d6e6 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -883,18 +883,25 @@ int queue_limits_commit_update(struct request_queue *q,
 		struct queue_limits *lim);
 int queue_limits_set(struct request_queue *q, struct queue_limits *lim);
 
+/**
+ * queue_limits_cancel_update - cancel an atomic update of queue limits
+ * @q:		queue to update
+ *
+ * This functions cancels an atomic update of the queue limits started by
+ * queue_limits_start_update() and should be used when an error occurs after
+ * starting update.
+ */
+static inline void queue_limits_cancel_update(struct request_queue *q)
+{
+	mutex_unlock(&q->limits_lock);
+}
+
 /*
  * Access functions for manipulating queue properties
  */
-void blk_queue_bounce_limit(struct request_queue *q, enum blk_bounce limit);
-extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
 extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int);
-extern void blk_queue_max_segments(struct request_queue *, unsigned short);
-extern void blk_queue_max_discard_segments(struct request_queue *,
-		unsigned short);
 void blk_queue_max_secure_erase_sectors(struct request_queue *q,
 		unsigned int max_sectors);
-extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
 extern void blk_queue_max_discard_sectors(struct request_queue *q,
 		unsigned int max_discard_sectors);
 extern void blk_queue_max_write_zeroes_sectors(struct request_queue *q,
@@ -911,7 +918,6 @@ void disk_update_readahead(struct gendisk *disk);
 extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min);
 extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
 extern void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt);
-extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
 extern void blk_set_queue_depth(struct request_queue *q, unsigned int depth);
 extern void blk_set_stacking_limits(struct queue_limits *lim);
 extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
@@ -919,10 +925,6 @@ extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 void queue_limits_stack_bdev(struct queue_limits *t, struct block_device *bdev,
 		sector_t offset, const char *pfx);
 extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int);
-extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
-extern void blk_queue_virt_boundary(struct request_queue *, unsigned long);
-extern void blk_queue_dma_alignment(struct request_queue *, int);
-extern void blk_queue_update_dma_alignment(struct request_queue *, int);
 extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
 extern void blk_queue_write_cache(struct request_queue *q, bool enabled, bool fua);
 
@@ -931,9 +933,6 @@ disk_alloc_independent_access_ranges(struct gendisk *disk, int nr_ia_ranges);
 void disk_set_independent_access_ranges(struct gendisk *disk,
 				struct blk_independent_access_ranges *iars);
 
-extern bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
-					      struct device *dev);
-
 bool __must_check blk_get_queue(struct request_queue *);
 extern void blk_put_queue(struct request_queue *);
 
diff --git a/include/linux/bsg-lib.h b/include/linux/bsg-lib.h
index 9e97ced2896df2..14fa93268630ed 100644
--- a/include/linux/bsg-lib.h
+++ b/include/linux/bsg-lib.h
@@ -65,7 +65,8 @@ struct bsg_job {
 void bsg_job_done(struct bsg_job *job, int result,
 		  unsigned int reply_payload_rcv_len);
 struct request_queue *bsg_setup_queue(struct device *dev, const char *name,
-		bsg_job_fn *job_fn, bsg_timeout_fn *timeout, int dd_job_size);
+		struct queue_limits *lim, bsg_job_fn *job_fn,
+		bsg_timeout_fn *timeout, int dd_job_size);
 void bsg_remove_queue(struct request_queue *q);
 void bsg_job_put(struct bsg_job *job);
 int __must_check bsg_job_get(struct bsg_job *job);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 66937b787cca48..13fb41d25da608 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1152,7 +1152,8 @@ extern int ata_std_bios_param(struct scsi_device *sdev,
 			      sector_t capacity, int geom[]);
 extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
 extern int ata_scsi_slave_alloc(struct scsi_device *sdev);
-extern int ata_scsi_slave_config(struct scsi_device *sdev);
+int ata_scsi_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim);
 extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
 extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
 				       int queue_depth);
@@ -1250,7 +1251,8 @@ extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
 extern void ata_port_probe(struct ata_port *ap);
 extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap);
 extern void ata_sas_tport_delete(struct ata_port *ap);
-extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
+int ata_sas_device_configure(struct scsi_device *sdev, struct queue_limits *lim,
+		struct ata_port *ap);
 extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
 extern void ata_tf_to_fis(const struct ata_taskfile *tf,
 			  u8 pmp, int is_cmd, u8 *fis);
@@ -1416,13 +1418,13 @@ extern const struct attribute_group *ata_common_sdev_groups[];
 	__ATA_BASE_SHT(drv_name),				\
 	.can_queue		= ATA_DEF_QUEUE,		\
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,		\
-	.slave_configure	= ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 
 #define ATA_SUBBASE_SHT_QD(drv_name, drv_qd)			\
 	__ATA_BASE_SHT(drv_name),				\
 	.can_queue		= drv_qd,			\
 	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,		\
-	.slave_configure	= ata_scsi_slave_config
+	.device_configure	= ata_scsi_device_configure
 
 #define ATA_BASE_SHT(drv_name)					\
 	ATA_SUBBASE_SHT(drv_name),				\
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 5894bf912f7bdb..88c6a76042ee73 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -433,8 +433,8 @@ struct mmc_host {
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
 	/* host specific block data */
-	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
-	unsigned short		max_segs;	/* see blk_queue_max_segments */
+	unsigned int		max_seg_size;	/* lim->max_segment_size */
+	unsigned short		max_segs;	/* lim->max_segments */
 	unsigned short		unused;
 	unsigned int		max_req_size;	/* maximum number of bytes in one req */
 	unsigned int		max_blk_size;	/* maximum size of one mmc block */
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index d06a0570f4c530..1324068dd950f3 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -683,7 +683,8 @@ int sas_phy_reset(struct sas_phy *phy, int hard_reset);
 int sas_phy_enable(struct sas_phy *phy, int enable);
 extern int sas_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 extern int sas_target_alloc(struct scsi_target *);
-extern int sas_slave_configure(struct scsi_device *);
+int sas_device_configure(struct scsi_device *dev,
+		struct queue_limits *lim);
 extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
 extern int sas_bios_param(struct scsi_device *, struct block_device *,
 			  sector_t capacity, int *hsc);
@@ -749,7 +750,7 @@ void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event,
 #endif
 
 #define LIBSAS_SHT_BASE			_LIBSAS_SHT_BASE		\
-	.slave_configure		= sas_slave_configure,		\
+	.device_configure		= sas_device_configure,		\
 	.slave_alloc			= sas_slave_alloc,		\
 
 #define LIBSAS_SHT_BASE_NO_SLAVE_INIT	_LIBSAS_SHT_BASE
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 129001f600fc95..19a1c5c4893534 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -211,7 +211,11 @@ struct scsi_host_template {
 	 *     up after yourself before returning non-0
 	 *
 	 * Status: OPTIONAL
+	 *
+	 * Note: slave_configure is the legacy version, use device_configure for
+	 * all new code.  A driver must never define both.
 	 */
+	int (* device_configure)(struct scsi_device *, struct queue_limits *lim);
 	int (* slave_configure)(struct scsi_device *);
 
 	/*
@@ -405,6 +409,8 @@ struct scsi_host_template {
 	 */
 	unsigned int max_segment_size;
 
+	unsigned int dma_alignment;
+
 	/*
 	 * DMA scatter gather segment boundary limit. A segment crossing this
 	 * boundary will be split in two.
@@ -614,6 +620,7 @@ struct Scsi_Host {
 	unsigned int max_sectors;
 	unsigned int opt_sectors;
 	unsigned int max_segment_size;
+	unsigned int dma_alignment;
 	unsigned long dma_boundary;
 	unsigned long virt_boundary_mask;
 	/*
@@ -665,6 +672,8 @@ struct Scsi_Host {
 	/* The transport requires the LUN bits NOT to be stored in CDB[1] */
 	unsigned no_scsi2_lun_in_cdb:1;
 
+	unsigned no_highmem:1;
+
 	/*
 	 * Optional work queue to be utilized by the transport
 	 */
diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h
index a0458bda314872..1394cf313bb37c 100644
--- a/include/scsi/scsi_transport.h
+++ b/include/scsi/scsi_transport.h
@@ -83,6 +83,6 @@ scsi_transport_device_data(struct scsi_device *sdev)
 		+ shost->transportt->device_private_offset;
 }
 
-void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q);
+void scsi_init_limits(struct Scsi_Host *shost, struct queue_limits *lim);
 
 #endif /* SCSI_TRANSPORT_H */
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index ebb1bd565103b9..4b884b8013e0db 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -709,6 +709,7 @@ struct fc_function_template {
 	int  	(*vport_delete)(struct fc_vport *);
 
 	/* bsg support */
+	u32				max_bsg_segments;
 	int	(*bsg_request)(struct bsg_job *);
 	int	(*bsg_timeout)(struct bsg_job *);
 
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index a35e12f8e68baa..bad88bd9199513 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -374,7 +374,6 @@ struct ufs_hba_variant_ops {
 	int	(*get_outstanding_cqs)(struct ufs_hba *hba,
 				       unsigned long *ocqs);
 	int	(*config_esi)(struct ufs_hba *hba);
-	void	(*config_scsi_dev)(struct scsi_device *sdev);
 };
 
 /* clock gating state  */
@@ -1390,8 +1389,6 @@ void ufshcd_release(struct ufs_hba *hba);
 
 void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value);
 
-u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba);
-
 int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);
 
 int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd);
diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
index 88193f5540e5c6..385e1c6b8d6046 100644
--- a/include/ufs/ufshci.h
+++ b/include/ufs/ufshci.h
@@ -355,12 +355,8 @@ enum {
 
 /* Interrupt disable masks */
 enum {
-	/* Interrupt disable mask for UFSHCI v1.0 */
-	INTERRUPT_MASK_ALL_VER_10	= 0x30FFF,
-	INTERRUPT_MASK_RW_VER_10	= 0x30000,
-
 	/* Interrupt disable mask for UFSHCI v1.1 */
-	INTERRUPT_MASK_ALL_VER_11	= 0x31FFF,
+	INTERRUPT_MASK_ALL_VER_11       = 0x31FFF,
 
 	/* Interrupt disable mask for UFSHCI v2.1 */
 	INTERRUPT_MASK_ALL_VER_21	= 0x71FFF,
@@ -425,13 +421,6 @@ union ufs_crypto_cfg_entry {
  * Request Descriptor Definitions
  */
 
-/* Transfer request command type */
-enum utp_cmd_type {
-	UTP_CMD_TYPE_SCSI		= 0x0,
-	UTP_CMD_TYPE_UFS		= 0x1,
-	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
-};
-
 /* To accommodate UFS2.0 required Command type */
 enum {
 	UTP_CMD_TYPE_UFS_STORAGE	= 0x1,