1 files changed, 88 insertions, 0 deletions
diff --git a/carl9170fw/carlfw/include/timer.h b/carl9170fw/carlfw/include/timer.h
new file mode 100644
index 00000000..1c1c6cd4
--- /dev/null
+++ b/carl9170fw/carlfw/include/timer.h
@@ -0,0 +1,88 @@
+/*
+ * carl9170 firmware - used by the ar9170 wireless device
+ *
+ * Clock, Timer & Timing
+ *
+ * Copyright (c) 2000-2005 ZyDAS Technology Corporation
+ * Copyright (c) 2007-2009 Atheros Communications, Inc.
+ * Copyright	2009	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2009-2011	Christian Lamparter <chunkeey@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __CARL9170FW_TIMER_H
+#define __CARL9170FW_TIMER_H
+
+#include "config.h"
+
+enum cpu_clock_t {
+	AHB_40MHZ_OSC   = 0,
+	AHB_20_22MHZ    = 1,
+	AHB_40_44MHZ    = 2,
+	AHB_80_88MHZ    = 3
+};
+
+static inline __inline uint32_t get_clock_counter(void)
+{
+	return (get(AR9170_TIMER_REG_CLOCK_HIGH) << 16) | get(AR9170_TIMER_REG_CLOCK_LOW);
+}
+
+/*
+ * works only up to 97 secs [44 MHz] or 107 secs for 40 MHz
+ * Also, the delay wait will be affected by 2.4GHz<->5GHz
+ * band changes.
+ */
+static inline __inline bool is_after_msecs(const uint32_t t0, const uint32_t msecs)
+{
+	return ((get_clock_counter() - t0) / 1000) > (msecs * fw.ticks_per_usec);
+}
+
+/*
+ * Note: Be careful with [u]delay. They won't service the
+ * hardware watchdog timer. It might trigger if you
+ * wait long enough. Also they don't terminate if sec is
+ * above 97 sec [44MHz] or more than 107 sec [40MHz].
+ */
+static inline __inline void delay(const uint32_t msec)
+{
+	uint32_t t1, t2, dt, wt;
+
+	wt = msec * fw.ticks_per_usec;
+
+	t1 = get_clock_counter();
+	while (1) {
+		t2 = get_clock_counter();
+		dt = (t2 - t1) / 1000;
+		if (dt >= wt)
+			break;
+	}
+}
+
+static inline __inline void udelay(const uint32_t usec)
+{
+	uint32_t t1, t2, dt;
+
+	t1 = get_clock_counter();
+	while (1) {
+		t2 = get_clock_counter();
+		dt = (t2 - t1);
+		if (dt >= (usec * fw.ticks_per_usec))
+			break;
+	}
+}
+
+void clock_set(enum cpu_clock_t _clock, bool on);
+#endif /* __CARL9170FW_TIMER_H */