Merge branch 'for-linus' of git://github.com/gregungerer/m68knommu

* 'for-linus' of git://github.com/gregungerer/m68knommu:
  m68k: drop unused Kconfig symbols
  m68k: drop unused Kconfig symbols
  m68knommu: create common externs for _ram* vars
  m68knommu: remove extern declarations of memory_start/memory_end from mm/init
  m68knommu: use generic section names in mm/init code
  m68knommu: use generic section names in setup code
  m68k: merge the mmu and non-mmu traps.c files
  m68k: move hardware vector setting from traps.c to its own file
  m68k: merge mmu and non-mmu include/asm/entry.h files
  m68k: merge the mmu and non-mmu kernel/Makefiles
  m68k: merge mmu and non-mmu arch Makefiles
  m68k: reorganize Kconfig options to improve mmu/non-mmu selections
  m68knommu: fix problems with SPI/GPIO on ColdFire 520x
  m68k: fix memcpy to unmatched/unaligned source and dest on 68000

35 files changed, 2596 insertions, 3208 deletions

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 9e8ee9d2b8ca3c..6c28582fb98f55 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -21,6 +21,15 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
+config GENERIC_CLOCKEVENTS
+	bool
+
+config GENERIC_CMOS_UPDATE
+	def_bool !MMU
+
+config GENERIC_GPIO
+	bool
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -29,10 +38,16 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config GENERIC_IOMAP
+	def_bool MMU
+
 config TIME_LOW_RES
 	bool
 	default y
 
+config ARCH_USES_GETTIMEOFFSET
+	def_bool MMU
+
 config NO_IOPORT
 	def_bool y
 
@@ -62,13 +77,31 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
-menu "Platform dependent setup"
+config MMU_MOTOROLA
+	bool
+
+config MMU_SUN3
+	bool
+	depends on MMU && !MMU_MOTOROLA
+
+menu "Platform setup"
+
+source arch/m68k/Kconfig.cpu
+
+source arch/m68k/Kconfig.machine
+
+source arch/m68k/Kconfig.bus
+
+endmenu
+
+menu "Kernel Features"
 
-if MMU
-source arch/m68k/Kconfig.mmu
+if COLDFIRE
+source "kernel/Kconfig.preempt"
 endif
-if !MMU
-source arch/m68k/Kconfig.nommu
+
+if !MMU || COLDFIRE
+source "kernel/time/Kconfig"
 endif
 
 source "mm/Kconfig"
@@ -85,9 +118,9 @@ if !MMU
 menu "Power management options"
 
 config PM
-        bool "Power Management support"
-        help
-          Support processor power management modes
+	bool "Power Management support"
+	help
+	  Support processor power management modes
 
 endmenu
 endif
@@ -96,151 +129,7 @@ source "net/Kconfig"
 
 source "drivers/Kconfig"
 
-if MMU
-
-menu "Character devices"
-
-config ATARI_MFPSER
-	tristate "Atari MFP serial support"
-	depends on ATARI
-	---help---
-	  If you like to use the MFP serial ports ("Modem1", "Serial1") under
-	  Linux, say Y. The driver equally supports all kinds of MFP serial
-	  ports and automatically detects whether Serial1 is available.
-
-	  To compile this driver as a module, choose M here.
-
-	  Note for Falcon users: You also have an MFP port, it's just not
-	  wired to the outside... But you could use the port under Linux.
-
-config ATARI_MIDI
-	tristate "Atari MIDI serial support"
-	depends on ATARI
-	help
-	  If you want to use your Atari's MIDI port in Linux, say Y.
-
-	  To compile this driver as a module, choose M here.
-
-config ATARI_DSP56K
-	tristate "Atari DSP56k support (EXPERIMENTAL)"
-	depends on ATARI && EXPERIMENTAL
-	help
-	  If you want to be able to use the DSP56001 in Falcons, say Y. This
-	  driver is still experimental, and if you don't know what it is, or
-	  if you don't have this processor, just say N.
-
-	  To compile this driver as a module, choose M here.
-
-config AMIGA_BUILTIN_SERIAL
-	tristate "Amiga builtin serial support"
-	depends on AMIGA
-	help
-	  If you want to use your Amiga's built-in serial port in Linux,
-	  answer Y.
-
-	  To compile this driver as a module, choose M here.
-
-config MULTIFACE_III_TTY
-	tristate "Multiface Card III serial support"
-	depends on AMIGA
-	help
-	  If you want to use a Multiface III card's serial port in Linux,
-	  answer Y.
-
-	  To compile this driver as a module, choose M here.
-
-config GVPIOEXT
-	tristate "GVP IO-Extender support"
-	depends on PARPORT=n && ZORRO
-	help
-	  If you want to use a GVP IO-Extender serial card in Linux, say Y.
-	  Otherwise, say N.
-
-config GVPIOEXT_LP
-	tristate "GVP IO-Extender parallel printer support"
-	depends on GVPIOEXT
-	help
-	  Say Y to enable driving a printer from the parallel port on your
-	  GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
-	tristate "GVP IO-Extender PLIP support"
-	depends on GVPIOEXT
-	help
-	  Say Y to enable doing IP over the parallel port on your GVP
-	  IO-Extender card, N otherwise.
-
-config MAC_HID
-	bool
-	depends on INPUT_ADBHID
-	default y
-
-config HPDCA
-	tristate "HP DCA serial support"
-	depends on DIO && SERIAL_8250
-	help
-	  If you want to use the internal "DCA" serial ports on an HP300
-	  machine, say Y here.
-
-config HPAPCI
-	tristate "HP APCI serial support"
-	depends on HP300 && SERIAL_8250 && EXPERIMENTAL
-	help
-	  If you want to use the internal "APCI" serial ports on an HP400
-	  machine, say Y here.
-
-config MVME147_SCC
-	bool "SCC support for MVME147 serial ports"
-	depends on MVME147 && BROKEN
-	help
-	  This is the driver for the serial ports on the Motorola MVME147
-	  boards.  Everyone using one of these boards should say Y here.
-
-config MVME162_SCC
-	bool "SCC support for MVME162 serial ports"
-	depends on MVME16x && BROKEN
-	help
-	  This is the driver for the serial ports on the Motorola MVME162 and
-	  172 boards.  Everyone using one of these boards should say Y here.
-
-config BVME6000_SCC
-	bool "SCC support for BVME6000 serial ports"
-	depends on BVME6000 && BROKEN
-	help
-	  This is the driver for the serial ports on the BVME4000 and BVME6000
-	  boards from BVM Ltd.  Everyone using one of these boards should say
-	  Y here.
-
-config DN_SERIAL
-	bool "Support for DN serial port (dummy)"
-	depends on APOLLO
-
-config SERIAL_CONSOLE
-	bool "Support for serial port console"
-	depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
-	---help---
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode). This could be useful if some terminal or printer is connected
-	  to that serial port.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyS1". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
-
-	  If you don't have a VGA card installed and you say Y here, the
-	  kernel will automatically use the first serial line, /dev/ttyS0, as
-	  system console.
-
-	  If unsure, say N.
-
-endmenu
-
-endif
+source "arch/m68k/Kconfig.devices"
 
 source "fs/Kconfig"
 
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
new file mode 100644
index 00000000000000..8294f0c1785ed9
--- /dev/null
+++ b/arch/m68k/Kconfig.bus
@@ -0,0 +1,55 @@
+if MMU
+
+comment "Bus Support"
+
+config NUBUS
+	bool
+	depends on MAC
+	default y
+
+config ZORRO
+	bool "Amiga Zorro (AutoConfig) bus support"
+	depends on AMIGA
+	help
+	  This enables support for the Zorro bus in the Amiga. If you have
+	  expansion cards in your Amiga that conform to the Amiga
+	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
+	  expansion cards that do not fit in the Zorro slots but fit in e.g.
+	  the CPU slot may fall in this category, so you have to say Y to let
+	  Linux use these.
+
+config AMIGA_PCMCIA
+	bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
+	depends on AMIGA && EXPERIMENTAL
+	help
+	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
+	  600. If you intend to use pcmcia cards say Y; otherwise say N.
+
+config ISA
+	bool
+	depends on Q40 || AMIGA_PCMCIA
+	default y
+	help
+	  Find out whether you have ISA slots on your motherboard.  ISA is the
+	  name of a bus system, i.e. the way the CPU talks to the other stuff
+	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
+	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+config GENERIC_ISA_DMA
+	def_bool ISA
+
+source "drivers/pci/Kconfig"
+
+source "drivers/zorro/Kconfig"
+
+endif
+
+if !MMU
+
+config ISA_DMA_API
+        def_bool !M5272
+
+source "drivers/pcmcia/Kconfig"
+
+endif
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
new file mode 100644
index 00000000000000..e632b2d1210615
--- /dev/null
+++ b/arch/m68k/Kconfig.cpu
@@ -0,0 +1,429 @@
+comment "Processor Type"
+
+config M68000
+	bool
+	select CPU_HAS_NO_BITFIELDS
+	help
+	  The Freescale (was Motorola) 68000 CPU is the first generation of
+	  the well known M68K family of processors. The CPU core as well as
+	  being available as a stand alone CPU was also used in many
+	  System-On-Chip devices (eg 68328, 68302, etc). It does not contain
+	  a paging MMU.
+
+config MCPU32
+	bool
+	select CPU_HAS_NO_BITFIELDS
+	help
+	  The Freescale (was then Motorola) CPU32 is a CPU core that is
+	  based on the 68020 processor. For the most part it is used in
+	  System-On-Chip parts, and does not contain a paging MMU.
+
+config COLDFIRE
+	bool
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select CPU_HAS_NO_BITFIELDS
+	help
+	  The Freescale ColdFire family of processors is a modern derivitive
+	  of the 68000 processor family. They are mainly targeted at embedded
+	  applications, and are all System-On-Chip (SOC) devices, as opposed
+	  to stand alone CPUs. They implement a subset of the original 68000
+	  processor instruction set.
+
+config M68020
+	bool "68020 support"
+	depends on MMU
+	help
+	  If you anticipate running this kernel on a computer with a MC68020
+	  processor, say Y. Otherwise, say N. Note that the 68020 requires a
+	  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
+	  Sun 3, which provides its own version.
+
+config M68030
+	bool "68030 support"
+	depends on MMU && !MMU_SUN3
+	help
+	  If you anticipate running this kernel on a computer with a MC68030
+	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
+	  work, as it does not include an MMU (Memory Management Unit).
+
+config M68040
+	bool "68040 support"
+	depends on MMU && !MMU_SUN3
+	help
+	  If you anticipate running this kernel on a computer with a MC68LC040
+	  or MC68040 processor, say Y. Otherwise, say N. Note that an
+	  MC68EC040 will not work, as it does not include an MMU (Memory
+	  Management Unit).
+
+config M68060
+	bool "68060 support"
+	depends on MMU && !MMU_SUN3
+	help
+	  If you anticipate running this kernel on a computer with a MC68060
+	  processor, say Y. Otherwise, say N.
+
+config M68328
+	bool "MC68328"
+	depends on !MMU
+	select M68000
+	help
+	  Motorola 68328 processor support.
+
+config M68EZ328
+	bool "MC68EZ328"
+	depends on !MMU
+	select M68000
+	help
+	  Motorola 68EX328 processor support.
+
+config M68VZ328
+	bool "MC68VZ328"
+	depends on !MMU
+	select M68000
+	help
+	  Motorola 68VZ328 processor support.
+
+config M68360
+	bool "MC68360"
+	depends on !MMU
+	select MCPU32
+	help
+	  Motorola 68360 processor support.
+
+config M5206
+	bool "MCF5206"
+	depends on !MMU
+	select COLDFIRE
+	select COLDFIRE_SW_A7
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5206 processor support.
+
+config M5206e
+	bool "MCF5206e"
+	depends on !MMU
+	select COLDFIRE
+	select COLDFIRE_SW_A7
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5206e processor support.
+
+config M520x
+	bool "MCF520x"
+	depends on !MMU
+	select COLDFIRE
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CACHE_SPLIT
+	help
+	   Freescale Coldfire 5207/5208 processor support.
+
+config M523x
+	bool "MCF523x"
+	depends on !MMU
+	select COLDFIRE
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CACHE_SPLIT
+	select HAVE_IPSBAR
+	help
+	  Freescale Coldfire 5230/1/2/4/5 processor support
+
+config M5249
+	bool "MCF5249"
+	depends on !MMU
+	select COLDFIRE
+	select COLDFIRE_SW_A7
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5249 processor support.
+
+config M527x
+	bool
+
+config M5271
+	bool "MCF5271"
+	depends on !MMU
+	select COLDFIRE
+	select M527x
+	select HAVE_CACHE_SPLIT
+	select HAVE_IPSBAR
+	select GENERIC_CLOCKEVENTS
+	help
+	  Freescale (Motorola) ColdFire 5270/5271 processor support.
+
+config M5272
+	bool "MCF5272"
+	depends on !MMU
+	select COLDFIRE
+	select COLDFIRE_SW_A7
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5272 processor support.
+
+config M5275
+	bool "MCF5275"
+	depends on !MMU
+	select COLDFIRE
+	select M527x
+	select HAVE_CACHE_SPLIT
+	select HAVE_IPSBAR
+	select GENERIC_CLOCKEVENTS
+	help
+	  Freescale (Motorola) ColdFire 5274/5275 processor support.
+
+config M528x
+	bool "MCF528x"
+	depends on !MMU
+	select COLDFIRE
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CACHE_SPLIT
+	select HAVE_IPSBAR
+	help
+	  Motorola ColdFire 5280/5282 processor support.
+
+config M5307
+	bool "MCF5307"
+	depends on !MMU
+	select COLDFIRE
+	select COLDFIRE_SW_A7
+	select HAVE_CACHE_CB
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5307 processor support.
+
+config M532x
+	bool "MCF532x"
+	depends on !MMU
+	select COLDFIRE
+	select HAVE_CACHE_CB
+	help
+	  Freescale (Motorola) ColdFire 532x processor support.
+
+config M5407
+	bool "MCF5407"
+	depends on !MMU
+	select COLDFIRE
+	select COLDFIRE_SW_A7
+	select HAVE_CACHE_CB
+	select HAVE_MBAR
+	help
+	  Motorola ColdFire 5407 processor support.
+
+config M54xx
+	bool
+
+config M547x
+	bool "MCF547x"
+	depends on !MMU
+	select COLDFIRE
+	select M54xx
+	select HAVE_CACHE_CB
+	select HAVE_MBAR
+	help
+	  Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
+
+config M548x
+	bool "MCF548x"
+	depends on !MMU
+	select COLDFIRE
+	select M54xx
+	select HAVE_CACHE_CB
+	select HAVE_MBAR
+	help
+	  Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
+
+
+comment "Processor Specific Options"
+
+config M68KFPU_EMU
+	bool "Math emulation support (EXPERIMENTAL)"
+	depends on MMU
+	depends on EXPERIMENTAL
+	help
+	  At some point in the future, this will cause floating-point math
+	  instructions to be emulated by the kernel on machines that lack a
+	  floating-point math coprocessor.  Thrill-seekers and chronically
+	  sleep-deprived psychotic hacker types can say Y now, everyone else
+	  should probably wait a while.
+
+config M68KFPU_EMU_EXTRAPREC
+	bool "Math emulation extra precision"
+	depends on M68KFPU_EMU
+	help
+	  The fpu uses normally a few bit more during calculations for
+	  correct rounding, the emulator can (often) do the same but this
+	  extra calculation can cost quite some time, so you can disable
+	  it here. The emulator will then "only" calculate with a 64 bit
+	  mantissa and round slightly incorrect, what is more than enough
+	  for normal usage.
+
+config M68KFPU_EMU_ONLY
+	bool "Math emulation only kernel"
+	depends on M68KFPU_EMU
+	help
+	  This option prevents any floating-point instructions from being
+	  compiled into the kernel, thereby the kernel doesn't save any
+	  floating point context anymore during task switches, so this
+	  kernel will only be usable on machines without a floating-point
+	  math coprocessor. This makes the kernel a bit faster as no tests
+	  needs to be executed whether a floating-point instruction in the
+	  kernel should be executed or not.
+
+config ADVANCED
+	bool "Advanced configuration options"
+	depends on MMU
+	---help---
+	  This gives you access to some advanced options for the CPU. The
+	  defaults should be fine for most users, but these options may make
+	  it possible for you to improve performance somewhat if you know what
+	  you are doing.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about these options.
+
+	  Most users should say N to this question.
+
+config RMW_INSNS
+	bool "Use read-modify-write instructions"
+	depends on ADVANCED
+	---help---
+	  This allows to use certain instructions that work with indivisible
+	  read-modify-write bus cycles. While this is faster than the
+	  workaround of disabling interrupts, it can conflict with DMA
+	  ( = direct memory access) on many Amiga systems, and it is also said
+	  to destabilize other machines. It is very likely that this will
+	  cause serious problems on any Amiga or Atari Medusa if set. The only
+	  configuration where it should work are 68030-based Ataris, where it
+	  apparently improves performance. But you've been warned! Unless you
+	  really know what you are doing, say N. Try Y only if you're quite
+	  adventurous.
+
+config SINGLE_MEMORY_CHUNK
+	bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
+	depends on MMU
+	default y if SUN3
+	select NEED_MULTIPLE_NODES
+	help
+	  Ignore all but the first contiguous chunk of physical memory for VM
+	  purposes.  This will save a few bytes kernel size and may speed up
+	  some operations.  Say N if not sure.
+
+config ARCH_DISCONTIGMEM_ENABLE
+	def_bool MMU && !SINGLE_MEMORY_CHUNK
+
+config 060_WRITETHROUGH
+	bool "Use write-through caching for 68060 supervisor accesses"
+	depends on ADVANCED && M68060
+	---help---
+	  The 68060 generally uses copyback caching of recently accessed data.
+	  Copyback caching means that memory writes will be held in an on-chip
+	  cache and only written back to memory some time later.  Saying Y
+	  here will force supervisor (kernel) accesses to use writethrough
+	  caching.  Writethrough caching means that data is written to memory
+	  straight away, so that cache and memory data always agree.
+	  Writethrough caching is less efficient, but is needed for some
+	  drivers on 68060 based systems where the 68060 bus snooping signal
+	  is hardwired on.  The 53c710 SCSI driver is known to suffer from
+	  this problem.
+
+config M68K_L2_CACHE
+	bool
+	depends on MAC
+	default y
+
+config NODES_SHIFT
+	int
+	default "3"
+	depends on !SINGLE_MEMORY_CHUNK
+
+config FPU
+	bool
+
+config COLDFIRE_SW_A7
+	bool
+
+config HAVE_CACHE_SPLIT
+	bool
+
+config HAVE_CACHE_CB
+	bool
+
+config HAVE_MBAR
+	bool
+
+config HAVE_IPSBAR
+	bool
+
+config CLOCK_SET
+	bool "Enable setting the CPU clock frequency"
+	depends on COLDFIRE
+	default n
+	help
+	  On some CPU's you do not need to know what the core CPU clock
+	  frequency is. On these you can disable clock setting. On some
+	  traditional 68K parts, and on all ColdFire parts you need to set
+	  the appropriate CPU clock frequency. On these devices many of the
+	  onboard peripherals derive their timing from the master CPU clock
+	  frequency.
+
+config CLOCK_FREQ
+	int "Set the core clock frequency"
+	default "66666666"
+	depends on CLOCK_SET
+	help
+	  Define the CPU clock frequency in use. This is the core clock
+	  frequency, it may or may not be the same as the external clock
+	  crystal fitted to your board. Some processors have an internal
+	  PLL and can have their frequency programmed at run time, others
+	  use internal dividers. In general the kernel won't setup a PLL
+	  if it is fitted (there are some exceptions). This value will be
+	  specific to the exact CPU that you are using.
+
+config OLDMASK
+	bool "Old mask 5307 (1H55J) silicon"
+	depends on M5307
+	help
+	  Build support for the older revision ColdFire 5307 silicon.
+	  Specifically this is the 1H55J mask revision.
+
+if HAVE_CACHE_SPLIT
+choice
+	prompt "Split Cache Configuration"
+	default CACHE_I
+
+config CACHE_I
+	bool "Instruction"
+	help
+	  Use all of the ColdFire CPU cache memory as an instruction cache.
+
+config CACHE_D
+	bool "Data"
+	help
+	  Use all of the ColdFire CPU cache memory as a data cache.
+
+config CACHE_BOTH
+	bool "Both"
+	help
+	  Split the ColdFire CPU cache, and use half as an instruction cache
+	  and half as a data cache.
+endchoice
+endif
+
+if HAVE_CACHE_CB
+choice
+	prompt "Data cache mode"
+	default CACHE_WRITETHRU
+
+config CACHE_WRITETHRU
+	bool "Write-through"
+	help
+	  The ColdFire CPU cache is set into Write-through mode.
+
+config CACHE_COPYBACK
+	bool "Copy-back"
+	help
+	  The ColdFire CPU cache is set into Copy-back mode.
+endchoice
+endif
+
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
new file mode 100644
index 00000000000000..d214034be6a6ab
--- /dev/null
+++ b/arch/m68k/Kconfig.devices
@@ -0,0 +1,123 @@
+if MMU
+
+config ARCH_MAY_HAVE_PC_FDC
+	bool
+	depends on BROKEN && (Q40 || SUN3X)
+	default y
+
+menu "Platform devices"
+
+config HEARTBEAT
+	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
+	default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
+	help
+	  Use the power-on LED on your machine as a load meter.  The exact
+	  behavior is platform-dependent, but normally the flash frequency is
+	  a hyperbolic function of the 5-minute load average.
+
+# We have a dedicated heartbeat LED. :-)
+config PROC_HARDWARE
+	bool "/proc/hardware support"
+	help
+	  Say Y here to support the /proc/hardware file, which gives you
+	  access to information about the machine you're running on,
+	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
+	  and memory size.
+
+endmenu
+
+menu "Character devices"
+
+config ATARI_MFPSER
+	tristate "Atari MFP serial support"
+	depends on ATARI
+	---help---
+	  If you like to use the MFP serial ports ("Modem1", "Serial1") under
+	  Linux, say Y. The driver equally supports all kinds of MFP serial
+	  ports and automatically detects whether Serial1 is available.
+
+	  To compile this driver as a module, choose M here.
+
+	  Note for Falcon users: You also have an MFP port, it's just not
+	  wired to the outside... But you could use the port under Linux.
+
+config ATARI_MIDI
+	tristate "Atari MIDI serial support"
+	depends on ATARI
+	help
+	  If you want to use your Atari's MIDI port in Linux, say Y.
+
+	  To compile this driver as a module, choose M here.
+
+config ATARI_DSP56K
+	tristate "Atari DSP56k support (EXPERIMENTAL)"
+	depends on ATARI && EXPERIMENTAL
+	help
+	  If you want to be able to use the DSP56001 in Falcons, say Y. This
+	  driver is still experimental, and if you don't know what it is, or
+	  if you don't have this processor, just say N.
+
+	  To compile this driver as a module, choose M here.
+
+config AMIGA_BUILTIN_SERIAL
+	tristate "Amiga builtin serial support"
+	depends on AMIGA
+	help
+	  If you want to use your Amiga's built-in serial port in Linux,
+	  answer Y.
+
+	  To compile this driver as a module, choose M here.
+
+config MULTIFACE_III_TTY
+	tristate "Multiface Card III serial support"
+	depends on AMIGA
+	help
+	  If you want to use a Multiface III card's serial port in Linux,
+	  answer Y.
+
+	  To compile this driver as a module, choose M here.
+
+config HPDCA
+	tristate "HP DCA serial support"
+	depends on DIO && SERIAL_8250
+	help
+	  If you want to use the internal "DCA" serial ports on an HP300
+	  machine, say Y here.
+
+config HPAPCI
+	tristate "HP APCI serial support"
+	depends on HP300 && SERIAL_8250 && EXPERIMENTAL
+	help
+	  If you want to use the internal "APCI" serial ports on an HP400
+	  machine, say Y here.
+
+config DN_SERIAL
+	bool "Support for DN serial port (dummy)"
+	depends on APOLLO
+
+config SERIAL_CONSOLE
+	bool "Support for serial port console"
+	depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || SERIAL167 || DN_SERIAL)
+	---help---
+	  If you say Y here, it will be possible to use a serial port as the
+	  system console (the system console is the device which receives all
+	  kernel messages and warnings and which allows logins in single user
+	  mode). This could be useful if some terminal or printer is connected
+	  to that serial port.
+
+	  Even if you say Y here, the currently visible virtual console
+	  (/dev/tty0) will still be used as the system console by default, but
+	  you can alter that using a kernel command line option such as
+	  "console=ttyS1". (Try "man bootparam" or see the documentation of
+	  your boot loader (lilo or loadlin) about how to pass options to the
+	  kernel at boot time.)
+
+	  If you don't have a VGA card installed and you say Y here, the
+	  kernel will automatically use the first serial line, /dev/ttyS0, as
+	  system console.
+
+	  If unsure, say N.
+
+endmenu
+
+endif
diff --git a/arch/m68k/Kconfig.nommu b/arch/m68k/Kconfig.machine
index ff46383112a417..ef4a26aff780c9 100644
--- a/arch/m68k/Kconfig.nommu
+++ b/arch/m68k/Kconfig.machine
@@ -1,297 +1,142 @@
-config FPU
-	bool
-	default n
-
-config GENERIC_GPIO
-	bool
-	default n
-
-config GENERIC_CMOS_UPDATE
-	bool
-	default y
-
-config GENERIC_CLOCKEVENTS
-	bool
-	default n
-
-config M68000
-	bool
-	select CPU_HAS_NO_BITFIELDS
-	help
-	  The Freescale (was Motorola) 68000 CPU is the first generation of
-	  the well known M68K family of processors. The CPU core as well as
-	  being available as a stand alone CPU was also used in many
-	  System-On-Chip devices (eg 68328, 68302, etc). It does not contain
-	  a paging MMU.
-
-config MCPU32
-	bool
-	select CPU_HAS_NO_BITFIELDS
-	help
-	  The Freescale (was then Motorola) CPU32 is a CPU core that is
-	  based on the 68020 processor. For the most part it is used in
-	  System-On-Chip parts, and does not contain a paging MMU.
-
-config COLDFIRE
-	bool
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_HAS_NO_BITFIELDS
-	help
-	  The Freescale ColdFire family of processors is a modern derivitive
-	  of the 68000 processor family. They are mainly targeted at embedded
-	  applications, and are all System-On-Chip (SOC) devices, as opposed
-	  to stand alone CPUs. They implement a subset of the original 68000
-	  processor instruction set.
-
-config COLDFIRE_SW_A7
-	bool
-	default n
-
-config HAVE_CACHE_SPLIT
-	bool
-
-config HAVE_CACHE_CB
-	bool
-
-config HAVE_MBAR
-	bool
-
-config HAVE_IPSBAR
-	bool
-
-choice
-	prompt "CPU"
-	default M68EZ328
-
-config M68328
-	bool "MC68328"
-	select M68000
-	help
-	  Motorola 68328 processor support.
-
-config M68EZ328
-	bool "MC68EZ328"
-	select M68000
-	help
-	  Motorola 68EX328 processor support.
-
-config M68VZ328
-	bool "MC68VZ328"
-	select M68000
-	help
-	  Motorola 68VZ328 processor support.
-
-config M68360
-	bool "MC68360"
-	select MCPU32
-	help
-	  Motorola 68360 processor support.
-
-config M5206
-	bool "MCF5206"
-	select COLDFIRE
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5206 processor support.
+comment "Machine Types"
+
+config AMIGA
+	bool "Amiga support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  This option enables support for the Amiga series of computers. If
+	  you plan to use this kernel on an Amiga, say Y here and browse the
+	  material available in <file:Documentation/m68k>; otherwise say N.
+
+config ATARI
+	bool "Atari support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  This option enables support for the 68000-based Atari series of
+	  computers (including the TT, Falcon and Medusa). If you plan to use
+	  this kernel on an Atari, say Y here and browse the material
+	  available in <file:Documentation/m68k>; otherwise say N.
+
+config MAC
+	bool "Macintosh support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  This option enables support for the Apple Macintosh series of
+	  computers (yes, there is experimental support now, at least for part
+	  of the series).
+
+	  Say N unless you're willing to code the remaining necessary support.
+	  ;)
+
+config APOLLO
+	bool "Apollo support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  Say Y here if you want to run Linux on an MC680x0-based Apollo
+	  Domain workstation such as the DN3500.
+
+config VME
+	bool "VME (Motorola and BVM) support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  Say Y here if you want to build a kernel for a 680x0 based VME
+	  board.  Boards currently supported include Motorola boards MVME147,
+	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
+	  BVME6000 boards from BVM Ltd are also supported.
+
+config MVME147
+	bool "MVME147 support"
+	depends on MMU
+	depends on VME
+	help
+	  Say Y to include support for early Motorola VME boards.  This will
+	  build a kernel which can run on MVME147 single-board computers.  If
+	  you select this option you will have to select the appropriate
+	  drivers for SCSI, Ethernet and serial ports later on.
+
+config MVME16x
+	bool "MVME162, 166 and 167 support"
+	depends on MMU
+	depends on VME
+	help
+	  Say Y to include support for Motorola VME boards.  This will build a
+	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
+	  MVME177 boards.  If you select this option you will have to select
+	  the appropriate drivers for SCSI, Ethernet and serial ports later
+	  on.
+
+config BVME6000
+	bool "BVME4000 and BVME6000 support"
+	depends on MMU
+	depends on VME
+	help
+	  Say Y to include support for VME boards from BVM Ltd.  This will
+	  build a kernel which can run on BVME4000 and BVME6000 boards.  If
+	  you select this option you will have to select the appropriate
+	  drivers for SCSI, Ethernet and serial ports later on.
+
+config HP300
+	bool "HP9000/300 and HP9000/400 support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  This option enables support for the HP9000/300 and HP9000/400 series
+	  of workstations. Support for these machines is still somewhat
+	  experimental. If you plan to try to use the kernel on such a machine
+	  say Y here.
+	  Everybody else says N.
+
+config SUN3X
+	bool "Sun3x support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	select M68030
+	help
+	  This option enables support for the Sun 3x series of workstations.
+	  Be warned that this support is very experimental.
+	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.
+	  General Linux information on the Sun 3x series (now discontinued)
+	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+	  If you don't want to compile a kernel for a Sun 3x, say N.
+
+config Q40
+	bool "Q40/Q60 support"
+	depends on MMU
+	select MMU_MOTOROLA if MMU
+	help
+	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
+	  manufactured in Germany.  There is an official Q40 home page at
+	  <http://www.q40.de/>.  This option enables support for the Q40 and
+	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
+	  emulation.
+
+config SUN3
+	bool "Sun3 support"
+	depends on MMU
+	depends on !MMU_MOTOROLA
+	select MMU_SUN3 if MMU
+	select M68020
+	help
+	  This option enables support for the Sun 3 series of workstations
+	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
+	  that all other hardware types must be disabled, as Sun 3 kernels
+	  are incompatible with all other m68k targets (including Sun 3x!).
+
+	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
 
-config M5206e
-	bool "MCF5206e"
-	select COLDFIRE
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5206e processor support.
-
-config M520x
-	bool "MCF520x"
-	select COLDFIRE
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CACHE_SPLIT
-	help
-	   Freescale Coldfire 5207/5208 processor support.
-
-config M523x
-	bool "MCF523x"
-	select COLDFIRE
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	help
-	  Freescale Coldfire 5230/1/2/4/5 processor support
-
-config M5249
-	bool "MCF5249"
-	select COLDFIRE
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5249 processor support.
-
-config M5271
-	bool "MCF5271"
-	select COLDFIRE
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	help
-	  Freescale (Motorola) ColdFire 5270/5271 processor support.
-
-config M5272
-	bool "MCF5272"
-	select COLDFIRE
-	select COLDFIRE_SW_A7
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5272 processor support.
-
-config M5275
-	bool "MCF5275"
-	select COLDFIRE
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	help
-	  Freescale (Motorola) ColdFire 5274/5275 processor support.
-
-config M528x
-	bool "MCF528x"
-	select COLDFIRE
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CACHE_SPLIT
-	select HAVE_IPSBAR
-	help
-	  Motorola ColdFire 5280/5282 processor support.
-
-config M5307
-	bool "MCF5307"
-	select COLDFIRE
-	select COLDFIRE_SW_A7
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5307 processor support.
-
-config M532x
-	bool "MCF532x"
-	select COLDFIRE
-	select HAVE_CACHE_CB
-	help
-	  Freescale (Motorola) ColdFire 532x processor support.
-
-config M5407
-	bool "MCF5407"
-	select COLDFIRE
-	select COLDFIRE_SW_A7
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Motorola ColdFire 5407 processor support.
-
-config M547x
-	bool "MCF547x"
-	select COLDFIRE
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
-
-config M548x
-	bool "MCF548x"
-	select COLDFIRE
-	select HAVE_CACHE_CB
-	select HAVE_MBAR
-	help
-	  Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
-
-endchoice
-
-config M527x
-	bool
-	depends on (M5271 || M5275)
-	select GENERIC_CLOCKEVENTS
-	default y
-
-config M54xx
+config PILOT
 	bool
-	depends on (M548x || M547x)
-	default y
-
-config CLOCK_SET
-	bool "Enable setting the CPU clock frequency"
-	default n
-	help
-	  On some CPU's you do not need to know what the core CPU clock
-	  frequency is. On these you can disable clock setting. On some
-	  traditional 68K parts, and on all ColdFire parts you need to set
-	  the appropriate CPU clock frequency. On these devices many of the
-	  onboard peripherals derive their timing from the master CPU clock
-	  frequency.
-
-config CLOCK_FREQ
-	int "Set the core clock frequency"
-	default "66666666"
-	depends on CLOCK_SET
-	help
-	  Define the CPU clock frequency in use. This is the core clock
-	  frequency, it may or may not be the same as the external clock
-	  crystal fitted to your board. Some processors have an internal
-	  PLL and can have their frequency programmed at run time, others
-	  use internal dividers. In general the kernel won't setup a PLL
-	  if it is fitted (there are some exceptions). This value will be
-	  specific to the exact CPU that you are using.
-
-config OLDMASK
-	bool "Old mask 5307 (1H55J) silicon"
-	depends on M5307
-	help
-	  Build support for the older revision ColdFire 5307 silicon.
-	  Specifically this is the 1H55J mask revision.
-
-if HAVE_CACHE_SPLIT
-choice
-	prompt "Split Cache Configuration"
-	default CACHE_I
-
-config CACHE_I
-	bool "Instruction"
-	help
-	  Use all of the ColdFire CPU cache memory as an instruction cache.
-
-config CACHE_D
-	bool "Data"
-	help
-	  Use all of the ColdFire CPU cache memory as a data cache.
-
-config CACHE_BOTH
-	bool "Both"
-	help
-	  Split the ColdFire CPU cache, and use half as an instruction cache
-	  and half as a data cache.
-endchoice
-endif
-
-if HAVE_CACHE_CB
-choice
-	prompt "Data cache mode"
-	default CACHE_WRITETHRU
-
-config CACHE_WRITETHRU
-	bool "Write-through"
-	help
-	  The ColdFire CPU cache is set into Write-through mode.
-
-config CACHE_COPYBACK
-	bool "Copy-back"
-	help
-	  The ColdFire CPU cache is set into Copy-back mode.
-endchoice
-endif
-
-comment "Platform"
 
 config PILOT3
 	bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support"
 	depends on M68328
+	select PILOT
 	help
 	  Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
 
@@ -302,7 +147,7 @@ config XCOPILOT_BUGS
 	  Support the bugs of Xcopilot.
 
 config UC5272
-	bool 'Arcturus Networks uC5272 dimm board support'
+	bool "Arcturus Networks uC5272 dimm board support"
 	depends on M5272
 	help
 	  Support for the Arcturus Networks uC5272 dimm board.
@@ -356,15 +201,23 @@ config UCQUICC
 	help
 	  Support for the Lineo uCquicc board.
 
+config ARNEWSH
+	bool
+
 config ARN5206
 	bool "Arnewsh 5206 board support"
 	depends on M5206
+	select ARNEWSH
 	help
 	  Support for the Arnewsh 5206 board.
 
+config FREESCALE
+	bool
+
 config M5206eC3
 	bool "Motorola M5206eC3 board support"
 	depends on M5206e
+	select FREESCALE
 	help
 	  Support for the Motorola M5206eC3 board.
 
@@ -377,75 +230,92 @@ config ELITE
 config M5208EVB
 	bool "Freescale M5208EVB board support"
 	depends on M520x
+	select FREESCALE
 	help
 	  Support for the Freescale Coldfire M5208EVB.
 
 config M5235EVB
 	bool "Freescale M5235EVB support"
 	depends on M523x
+	select FREESCALE
 	help
 	  Support for the Freescale M5235EVB board.
 
 config M5249C3
 	bool "Motorola M5249C3 board support"
 	depends on M5249
+	select FREESCALE
 	help
 	  Support for the Motorola M5249C3 board.
 
 config M5271EVB
 	bool "Freescale (Motorola) M5271EVB board support"
 	depends on M5271
+	select FREESCALE
 	help
 	  Support for the Freescale (Motorola) M5271EVB board.
 
 config M5275EVB
 	bool "Freescale (Motorola) M5275EVB board support"
 	depends on M5275
+	select FREESCALE
 	help
 	  Support for the Freescale (Motorola) M5275EVB board.
 
 config M5272C3
 	bool "Motorola M5272C3 board support"
 	depends on M5272
+	select FREESCALE
 	help
 	  Support for the Motorola M5272C3 board.
 
+config senTec
+	bool
+
 config COBRA5272
 	bool "senTec COBRA5272 board support"
 	depends on M5272
+	select senTec
 	help
 	  Support for the senTec COBRA5272 board.
 
+config AVNET
+	bool
+
 config AVNET5282
 	bool "Avnet 5282 board support"
 	depends on M528x
+	select AVNET
 	help
-	  Support for the Avnet 5282 board.  
-	  
+	  Support for the Avnet 5282 board.
+
 config M5282EVB
 	bool "Motorola M5282EVB board support"
 	depends on M528x
+	select FREESCALE
 	help
 	  Support for the Motorola M5282EVB board.
 
 config COBRA5282
 	bool "senTec COBRA5282 board support"
 	depends on M528x
+	select senTec
 	help
 	  Support for the senTec COBRA5282 board.
-	  
+
 config SOM5282EM
 	bool "EMAC.Inc SOM5282EM board support"
 	depends on M528x
+	select EMAC_INC
 	help
-	  Support for the EMAC.Inc SOM5282EM module.  
-	  
+	  Support for the EMAC.Inc SOM5282EM module.
+
 config WILDFIRE
 	bool "Intec Automation Inc. WildFire board support"
 	depends on M528x
 	help
 	  Support for the Intec Automation Inc. WildFire.
-	  
+
 config WILDFIREMOD
 	bool "Intec Automation Inc. WildFire module support"
 	depends on M528x
@@ -455,12 +325,14 @@ config WILDFIREMOD
 config ARN5307
 	bool "Arnewsh 5307 board support"
 	depends on M5307
+	select ARNEWSH
 	help
 	  Support for the Arnewsh 5307 board.
 
 config M5307C3
 	bool "Motorola M5307C3 board support"
 	depends on M5307
+	select FREESCALE
 	help
 	  Support for the Motorola M5307C3 board.
 
@@ -473,6 +345,7 @@ config SECUREEDGEMP3
 config M5329EVB
 	bool "Freescale (Motorola) M5329EVB board support"
 	depends on M532x
+	select FREESCALE
 	help
 	  Support for the Freescale (Motorola) M5329EVB board.
 
@@ -485,6 +358,7 @@ config COBRA5329
 config M5407C3
 	bool "Motorola M5407C3 board support"
 	depends on M5407
+	select FREESCALE
 	help
 	  Support for the Motorola M5407C3 board.
 
@@ -524,9 +398,13 @@ config SNAPGEAR
 	help
 	  Special additional support for SnapGear router boards.
 
+config SNEHA
+	bool
+
 config CPU16B
 	bool "Sneha Technologies S.L. Sarasvati board support"
 	depends on M5272
+	select SNEHA
 	help
 	  Support for the SNEHA CPU16B board.
 
@@ -536,63 +414,20 @@ config MOD5272
 	help
 	  Support for the Netburner MOD-5272 board.
 
+config SAVANT
+	bool
+
 config SAVANTrosie1
 	bool "Savant Rosie1 board support"
 	depends on M523x
+	select SAVANT
 	help
 	  Support for the Savant Rosie1 board.
 
-config ROMFS_FROM_ROM
-	bool "ROMFS image not RAM resident"
-	depends on (NETtel || SNAPGEAR)
-	help
-	  The ROMfs filesystem will stay resident in the FLASH/ROM, not be
-	  moved into RAM.
-
-config PILOT
-	bool
-	default y
-	depends on (PILOT3 || PILOT5)
-
-config ARNEWSH
-	bool
-	default y
-	depends on (ARN5206 || ARN5307)
-
-config FREESCALE
-	bool
-	default y
-	depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || M5407C3)
-
-config HW_FEITH
-	bool
-	default y
-	depends on (CLEOPATRA || CANCam || SCALES)
-
-config senTec
-	bool
-	default y
-	depends on (COBRA5272 || COBRA5282)
-	
-config EMAC_INC
-	bool
-	default y
-	depends on (SOM5282EM)
 
-config SNEHA
-	bool
-	default y
-	depends on CPU16B
+if !MMU || COLDFIRE
 
-config SAVANT
-	bool
-	default y
-	depends on SAVANTrosie1
-
-config AVNET
-	bool
-	default y
-	depends on (AVNET5282)
+comment "Machine Options"
 
 config UBOOT
 	bool "Support for U-Boot command line parameters"
@@ -673,33 +508,6 @@ config KERNELBASE
 	  a system with the RAM based at address 0, and leaving enough room
 	  for the theoretical maximum number of 256 vectors.
 
-choice
-	prompt "RAM bus width"
-	default RAMAUTOBIT
-
-config RAMAUTOBIT
-	bool "AUTO"
-	help
-	  Select the physical RAM data bus size. Not needed on most platforms,
-	  so you can generally choose AUTO.
-
-config RAM8BIT
-	bool "8bit"
-	help
-	  Configure RAM bus to be 8 bits wide.
-
-config RAM16BIT
-	bool "16bit"
-	help
-	  Configure RAM bus to be 16 bits wide.
-
-config RAM32BIT
-	bool "32bit"
-	help
-	  Configure RAM bus to be 32 bits wide.
-
-endchoice
-
 comment "ROM configuration"
 
 config ROM
@@ -772,16 +580,4 @@ config ROMKERNEL
 
 endchoice
 
-if COLDFIRE
-source "kernel/Kconfig.preempt"
 endif
-
-source "kernel/time/Kconfig"
-
-config ISA_DMA_API
-	bool
-	depends on !M5272
-	default y
-
-source "drivers/pcmcia/Kconfig"
-
diff --git a/arch/m68k/Kconfig.mmu b/arch/m68k/Kconfig.mmu
deleted file mode 100644
index 13e20bbc4079d9..00000000000000
--- a/arch/m68k/Kconfig.mmu
+++ /dev/null
@@ -1,411 +0,0 @@
-config GENERIC_IOMAP
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	depends on BROKEN && (Q40 || SUN3X)
-	default y
-
-config ARCH_USES_GETTIMEOFFSET
-	def_bool y
-
-config EISA
-	bool
-	---help---
-	  The Extended Industry Standard Architecture (EISA) bus was
-	  developed as an open alternative to the IBM MicroChannel bus.
-
-	  The EISA bus provided some of the features of the IBM MicroChannel
-	  bus while maintaining backward compatibility with cards made for
-	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-	  1995 when it was made obsolete by the PCI bus.
-
-	  Say Y here if you are building a kernel for an EISA-based machine.
-
-	  Otherwise, say N.
-
-config MCA
-	bool
-	help
-	  MicroChannel Architecture is found in some IBM PS/2 machines and
-	  laptops.  It is a bus system similar to PCI or ISA. See
-	  <file:Documentation/mca.txt> (and especially the web page given
-	  there) before attempting to build an MCA bus kernel.
-
-config PCMCIA
-	tristate
-	---help---
-	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
-	  computer.  These are credit-card size devices such as network cards,
-	  modems or hard drives often used with laptops computers.  There are
-	  actually two varieties of these cards: the older 16 bit PCMCIA cards
-	  and the newer 32 bit CardBus cards.  If you want to use CardBus
-	  cards, you need to say Y here and also to "CardBus support" below.
-
-	  To use your PC-cards, you will need supporting software from David
-	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-	  for location).  Please also read the PCMCIA-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as modules, choose M here: the
-	  modules will be called pcmcia_core and ds.
-
-config AMIGA
-	bool "Amiga support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the Amiga series of computers. If
-	  you plan to use this kernel on an Amiga, say Y here and browse the
-	  material available in <file:Documentation/m68k>; otherwise say N.
-
-config ATARI
-	bool "Atari support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the 68000-based Atari series of
-	  computers (including the TT, Falcon and Medusa). If you plan to use
-	  this kernel on an Atari, say Y here and browse the material
-	  available in <file:Documentation/m68k>; otherwise say N.
-
-config MAC
-	bool "Macintosh support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the Apple Macintosh series of
-	  computers (yes, there is experimental support now, at least for part
-	  of the series).
-
-	  Say N unless you're willing to code the remaining necessary support.
-	  ;)
-
-config NUBUS
-	bool
-	depends on MAC
-	default y
-
-config M68K_L2_CACHE
-	bool
-	depends on MAC
-	default y
-
-config APOLLO
-	bool "Apollo support"
-	select MMU_MOTOROLA if MMU
-	help
-	  Say Y here if you want to run Linux on an MC680x0-based Apollo
-	  Domain workstation such as the DN3500.
-
-config VME
-	bool "VME (Motorola and BVM) support"
-	select MMU_MOTOROLA if MMU
-	help
-	  Say Y here if you want to build a kernel for a 680x0 based VME
-	  board.  Boards currently supported include Motorola boards MVME147,
-	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
-	  BVME6000 boards from BVM Ltd are also supported.
-
-config MVME147
-	bool "MVME147 support"
-	depends on VME
-	help
-	  Say Y to include support for early Motorola VME boards.  This will
-	  build a kernel which can run on MVME147 single-board computers.  If
-	  you select this option you will have to select the appropriate
-	  drivers for SCSI, Ethernet and serial ports later on.
-
-config MVME16x
-	bool "MVME162, 166 and 167 support"
-	depends on VME
-	help
-	  Say Y to include support for Motorola VME boards.  This will build a
-	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
-	  MVME177 boards.  If you select this option you will have to select
-	  the appropriate drivers for SCSI, Ethernet and serial ports later
-	  on.
-
-config BVME6000
-	bool "BVME4000 and BVME6000 support"
-	depends on VME
-	help
-	  Say Y to include support for VME boards from BVM Ltd.  This will
-	  build a kernel which can run on BVME4000 and BVME6000 boards.  If
-	  you select this option you will have to select the appropriate
-	  drivers for SCSI, Ethernet and serial ports later on.
-
-config HP300
-	bool "HP9000/300 and HP9000/400 support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the HP9000/300 and HP9000/400 series
-	  of workstations. Support for these machines is still somewhat
-	  experimental. If you plan to try to use the kernel on such a machine
-	  say Y here.
-	  Everybody else says N.
-
-config DIO
-	bool "DIO bus support"
-	depends on HP300
-	default y
-	help
-	  Say Y here to enable support for the "DIO" expansion bus used in
-	  HP300 machines. If you are using such a system you almost certainly
-	  want this.
-
-config SUN3X
-	bool "Sun3x support"
-	select MMU_MOTOROLA if MMU
-	select M68030
-	help
-	  This option enables support for the Sun 3x series of workstations.
-	  Be warned that this support is very experimental.
-	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.
-	  General Linux information on the Sun 3x series (now discontinued)
-	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-	  If you don't want to compile a kernel for a Sun 3x, say N.
-
-config Q40
-	bool "Q40/Q60 support"
-	select MMU_MOTOROLA if MMU
-	help
-	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
-	  manufactured in Germany.  There is an official Q40 home page at
-	  <http://www.q40.de/>.  This option enables support for the Q40 and
-	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
-	  emulation.
-
-config SUN3
-	bool "Sun3 support"
-	depends on !MMU_MOTOROLA
-	select MMU_SUN3 if MMU
-	select M68020
-	help
-	  This option enables support for the Sun 3 series of workstations
-	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
-	  that all other hardware types must be disabled, as Sun 3 kernels
-	  are incompatible with all other m68k targets (including Sun 3x!).
-
-	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
-config NATFEAT
-	bool "ARAnyM emulator support"
-	depends on ATARI
-	help
-	  This option enables support for ARAnyM native features, such as
-	  access to a disk image as /dev/hda.
-
-config NFBLOCK
-	tristate "NatFeat block device support"
-	depends on BLOCK && NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat block device
-	  which allows direct access to the hard drives without using
-	  the hardware emulation.
-
-config NFCON
-	tristate "NatFeat console driver"
-	depends on NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat console driver
-	  which allows the console output to be redirected to the stderr
-	  output of ARAnyM.
-
-config NFETH
-	tristate "NatFeat Ethernet support"
-	depends on NET_ETHERNET && NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat network device
-	  which will emulate a regular ethernet device while presenting an
-	  ethertap device to the host system.
-
-comment "Processor type"
-
-config M68020
-	bool "68020 support"
-	help
-	  If you anticipate running this kernel on a computer with a MC68020
-	  processor, say Y. Otherwise, say N. Note that the 68020 requires a
-	  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
-	  Sun 3, which provides its own version.
-
-config M68030
-	bool "68030 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68030
-	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
-	  work, as it does not include an MMU (Memory Management Unit).
-
-config M68040
-	bool "68040 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68LC040
-	  or MC68040 processor, say Y. Otherwise, say N. Note that an
-	  MC68EC040 will not work, as it does not include an MMU (Memory
-	  Management Unit).
-
-config M68060
-	bool "68060 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68060
-	  processor, say Y. Otherwise, say N.
-
-config MMU_MOTOROLA
-	bool
-
-config MMU_SUN3
-	bool
-	depends on MMU && !MMU_MOTOROLA
-
-config M68KFPU_EMU
-	bool "Math emulation support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  At some point in the future, this will cause floating-point math
-	  instructions to be emulated by the kernel on machines that lack a
-	  floating-point math coprocessor.  Thrill-seekers and chronically
-	  sleep-deprived psychotic hacker types can say Y now, everyone else
-	  should probably wait a while.
-
-config M68KFPU_EMU_EXTRAPREC
-	bool "Math emulation extra precision"
-	depends on M68KFPU_EMU
-	help
-	  The fpu uses normally a few bit more during calculations for
-	  correct rounding, the emulator can (often) do the same but this
-	  extra calculation can cost quite some time, so you can disable
-	  it here. The emulator will then "only" calculate with a 64 bit
-	  mantissa and round slightly incorrect, what is more than enough
-	  for normal usage.
-
-config M68KFPU_EMU_ONLY
-	bool "Math emulation only kernel"
-	depends on M68KFPU_EMU
-	help
-	  This option prevents any floating-point instructions from being
-	  compiled into the kernel, thereby the kernel doesn't save any
-	  floating point context anymore during task switches, so this
-	  kernel will only be usable on machines without a floating-point
-	  math coprocessor. This makes the kernel a bit faster as no tests
-	  needs to be executed whether a floating-point instruction in the
-	  kernel should be executed or not.
-
-config ADVANCED
-	bool "Advanced configuration options"
-	---help---
-	  This gives you access to some advanced options for the CPU. The
-	  defaults should be fine for most users, but these options may make
-	  it possible for you to improve performance somewhat if you know what
-	  you are doing.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about these options.
-
-	  Most users should say N to this question.
-
-config RMW_INSNS
-	bool "Use read-modify-write instructions"
-	depends on ADVANCED
-	---help---
-	  This allows to use certain instructions that work with indivisible
-	  read-modify-write bus cycles. While this is faster than the
-	  workaround of disabling interrupts, it can conflict with DMA
-	  ( = direct memory access) on many Amiga systems, and it is also said
-	  to destabilize other machines. It is very likely that this will
-	  cause serious problems on any Amiga or Atari Medusa if set. The only
-	  configuration where it should work are 68030-based Ataris, where it
-	  apparently improves performance. But you've been warned! Unless you
-	  really know what you are doing, say N. Try Y only if you're quite
-	  adventurous.
-
-config SINGLE_MEMORY_CHUNK
-	bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
-	default y if SUN3
-	select NEED_MULTIPLE_NODES
-	help
-	  Ignore all but the first contiguous chunk of physical memory for VM
-	  purposes.  This will save a few bytes kernel size and may speed up
-	  some operations.  Say N if not sure.
-
-config 060_WRITETHROUGH
-	bool "Use write-through caching for 68060 supervisor accesses"
-	depends on ADVANCED && M68060
-	---help---
-	  The 68060 generally uses copyback caching of recently accessed data.
-	  Copyback caching means that memory writes will be held in an on-chip
-	  cache and only written back to memory some time later.  Saying Y
-	  here will force supervisor (kernel) accesses to use writethrough
-	  caching.  Writethrough caching means that data is written to memory
-	  straight away, so that cache and memory data always agree.
-	  Writethrough caching is less efficient, but is needed for some
-	  drivers on 68060 based systems where the 68060 bus snooping signal
-	  is hardwired on.  The 53c710 SCSI driver is known to suffer from
-	  this problem.
-
-config ARCH_DISCONTIGMEM_ENABLE
-	def_bool !SINGLE_MEMORY_CHUNK
-
-config NODES_SHIFT
-	int
-	default "3"
-	depends on !SINGLE_MEMORY_CHUNK
-
-config ZORRO
-	bool "Amiga Zorro (AutoConfig) bus support"
-	depends on AMIGA
-	help
-	  This enables support for the Zorro bus in the Amiga. If you have
-	  expansion cards in your Amiga that conform to the Amiga
-	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
-	  expansion cards that do not fit in the Zorro slots but fit in e.g.
-	  the CPU slot may fall in this category, so you have to say Y to let
-	  Linux use these.
-
-config AMIGA_PCMCIA
-	bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
-	depends on AMIGA && EXPERIMENTAL
-	help
-	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
-	  600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config HEARTBEAT
-	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
-	default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
-
-# We have a dedicated heartbeat LED. :-)
-config PROC_HARDWARE
-	bool "/proc/hardware support"
-	help
-	  Say Y here to support the /proc/hardware file, which gives you
-	  access to information about the machine you're running on,
-	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
-	  and memory size.
-
-config ISA
-	bool
-	depends on Q40 || AMIGA_PCMCIA
-	default y
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config GENERIC_ISA_DMA
-	bool
-	depends on Q40 || AMIGA_PCMCIA
-	default y
-
-source "drivers/pci/Kconfig"
-
-source "drivers/zorro/Kconfig"
-
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index be46cadd401781..cf318f20c64d61 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -1,7 +1,171 @@
+#
+# m68k/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Hamish Macdonald
+# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
+#
+
 KBUILD_DEFCONFIG := multi_defconfig
 
+#
+#	Enable processor type. Ordering of these is important - we want to
+#	use the minimum processor type of the range we support. The logic
+#	for 680x0 will only allow use of the -m68060 or -m68040 if no other
+#	680x0 type is specified - and no option is specified for 68030 or
+#	68020. The other m68k/ColdFire types always specify some type of
+#	compiler cpu type flag.
+#
+ifndef CONFIG_M68040
+cpuflags-$(CONFIG_M68060)	:= -m68060
+endif
+ifndef CONFIG_M68060
+cpuflags-$(CONFIG_M68040)	:= -m68040
+endif
+cpuflags-$(CONFIG_M68030)	:=
+cpuflags-$(CONFIG_M68020)	:=
+cpuflags-$(CONFIG_M68360)	:= -m68332
+cpuflags-$(CONFIG_M68000)	:= -m68000
+cpuflags-$(CONFIG_M54xx)	:= $(call cc-option,-mcpu=5475,-m5200)
+cpuflags-$(CONFIG_M5407)	:= $(call cc-option,-mcpu=5407,-m5200)
+cpuflags-$(CONFIG_M532x)	:= $(call cc-option,-mcpu=532x,-m5307)
+cpuflags-$(CONFIG_M5307)	:= $(call cc-option,-mcpu=5307,-m5200)
+cpuflags-$(CONFIG_M528x)	:= $(call cc-option,-mcpu=528x,-m5307)
+cpuflags-$(CONFIG_M5275)	:= $(call cc-option,-mcpu=5275,-m5307)
+cpuflags-$(CONFIG_M5272)	:= $(call cc-option,-mcpu=5272,-m5307)
+cpuflags-$(CONFIG_M5271)	:= $(call cc-option,-mcpu=5271,-m5307)
+cpuflags-$(CONFIG_M523x)	:= $(call cc-option,-mcpu=523x,-m5307)
+cpuflags-$(CONFIG_M5249)	:= $(call cc-option,-mcpu=5249,-m5200)
+cpuflags-$(CONFIG_M520x)	:= $(call cc-option,-mcpu=5208,-m5200)
+cpuflags-$(CONFIG_M5206e)	:= $(call cc-option,-mcpu=5206e,-m5200)
+cpuflags-$(CONFIG_M5206)	:= $(call cc-option,-mcpu=5206,-m5200)
+
+KBUILD_AFLAGS += $(cpuflags-y)
+KBUILD_CFLAGS += $(cpuflags-y) -pipe
 ifdef CONFIG_MMU
-include $(srctree)/arch/m68k/Makefile_mm
+# without -fno-strength-reduce the 53c7xx.c driver fails ;-(
+KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
+else
+# we can use a m68k-linux-gcc toolchain with these in place
+KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
+KBUILD_CFLAGS += -D__uClinux__
+KBUILD_AFLAGS += -D__uClinux__
+endif
+
+LDFLAGS := -m m68kelf
+KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
+ifneq ($(SUBARCH),$(ARCH))
+	ifeq ($(CROSS_COMPILE),)
+		CROSS_COMPILE := $(call cc-cross-prefix, \
+			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
+	endif
+endif
+
+ifdef CONFIG_SUN3
+LDFLAGS_vmlinux = -N
+endif
+
+CHECKFLAGS += -D__mc68000__
+
+
+ifdef CONFIG_KGDB
+# If configured for kgdb support, include debugging infos and keep the
+# frame pointer
+KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
+endif
+
+#
+# Select the assembler head startup code. Order is important. The default
+# head code is first, processor specific selections can override it after.
+#
+head-y				:= arch/m68k/kernel/head.o
+head-$(CONFIG_SUN3)		:= arch/m68k/kernel/sun3-head.o
+head-$(CONFIG_M68360)		:= arch/m68k/platform/68360/head.o
+head-$(CONFIG_M68000)		:= arch/m68k/platform/68328/head.o
+head-$(CONFIG_COLDFIRE)		:= arch/m68k/platform/coldfire/head.o
+
+core-y				+= arch/m68k/kernel/	arch/m68k/mm/
+libs-y				+= arch/m68k/lib/
+
+core-$(CONFIG_Q40)		+= arch/m68k/q40/
+core-$(CONFIG_AMIGA)		+= arch/m68k/amiga/
+core-$(CONFIG_ATARI)		+= arch/m68k/atari/
+core-$(CONFIG_MAC)		+= arch/m68k/mac/
+core-$(CONFIG_HP300)		+= arch/m68k/hp300/
+core-$(CONFIG_APOLLO)		+= arch/m68k/apollo/
+core-$(CONFIG_MVME147)		+= arch/m68k/mvme147/
+core-$(CONFIG_MVME16x)		+= arch/m68k/mvme16x/
+core-$(CONFIG_BVME6000)		+= arch/m68k/bvme6000/
+core-$(CONFIG_SUN3X)		+= arch/m68k/sun3x/	arch/m68k/sun3/
+core-$(CONFIG_SUN3)		+= arch/m68k/sun3/	arch/m68k/sun3/prom/
+core-$(CONFIG_NATFEAT)		+= arch/m68k/emu/
+core-$(CONFIG_M68040)		+= arch/m68k/fpsp040/
+core-$(CONFIG_M68060)		+= arch/m68k/ifpsp060/
+core-$(CONFIG_M68KFPU_EMU)	+= arch/m68k/math-emu/
+core-$(CONFIG_M68360)		+= arch/m68k/platform/68360/
+core-$(CONFIG_M68000)		+= arch/m68k/platform/68328/
+core-$(CONFIG_M68EZ328)		+= arch/m68k/platform/68EZ328/
+core-$(CONFIG_M68VZ328)		+= arch/m68k/platform/68VZ328/
+core-$(CONFIG_COLDFIRE)		+= arch/m68k/platform/coldfire/
+core-$(CONFIG_M5206)		+= arch/m68k/platform/5206/
+core-$(CONFIG_M5206e)		+= arch/m68k/platform/5206/
+core-$(CONFIG_M520x)		+= arch/m68k/platform/520x/
+core-$(CONFIG_M523x)		+= arch/m68k/platform/523x/
+core-$(CONFIG_M5249)		+= arch/m68k/platform/5249/
+core-$(CONFIG_M527x)		+= arch/m68k/platform/527x/
+core-$(CONFIG_M5272)		+= arch/m68k/platform/5272/
+core-$(CONFIG_M528x)		+= arch/m68k/platform/528x/
+core-$(CONFIG_M5307)		+= arch/m68k/platform/5307/
+core-$(CONFIG_M532x)		+= arch/m68k/platform/532x/
+core-$(CONFIG_M5407)		+= arch/m68k/platform/5407/
+core-$(CONFIG_M54xx)		+= arch/m68k/platform/54xx/
+
+
+all:	zImage
+
+lilo:	vmlinux
+	if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
+	if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
+	cat vmlinux > $(INSTALL_PATH)/vmlinux
+	cp System.map $(INSTALL_PATH)/System.map
+	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
+
+zImage compressed: vmlinux.gz
+
+vmlinux.gz: vmlinux
+
+ifndef CONFIG_KGDB
+	cp vmlinux vmlinux.tmp
+	$(STRIP) vmlinux.tmp
+	gzip -9c vmlinux.tmp >vmlinux.gz
+	rm vmlinux.tmp
 else
-include $(srctree)/arch/m68k/Makefile_no
+	gzip -9c vmlinux >vmlinux.gz
 endif
+
+bzImage: vmlinux.bz2
+
+vmlinux.bz2: vmlinux
+
+ifndef CONFIG_KGDB
+	cp vmlinux vmlinux.tmp
+	$(STRIP) vmlinux.tmp
+	bzip2 -1c vmlinux.tmp >vmlinux.bz2
+	rm vmlinux.tmp
+else
+	bzip2 -1c vmlinux >vmlinux.bz2
+endif
+
+archclean:
+	rm -f vmlinux.gz vmlinux.bz2
+
+install:
+	sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
diff --git a/arch/m68k/Makefile_mm b/arch/m68k/Makefile_mm
deleted file mode 100644
index d449b6d5aecf62..00000000000000
--- a/arch/m68k/Makefile_mm
+++ /dev/null
@@ -1,121 +0,0 @@
-#
-# m68k/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Hamish Macdonald
-#
-
-# override top level makefile
-AS += -m68020
-LDFLAGS := -m m68kelf
-KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
-ifneq ($(SUBARCH),$(ARCH))
-	ifeq ($(CROSS_COMPILE),)
-		CROSS_COMPILE := $(call cc-cross-prefix, \
-			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
-	endif
-endif
-
-ifdef CONFIG_SUN3
-LDFLAGS_vmlinux = -N
-endif
-
-CHECKFLAGS += -D__mc68000__
-
-# without -fno-strength-reduce the 53c7xx.c driver fails ;-(
-KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2
-
-# enable processor switch if compiled only for a single cpu
-ifndef CONFIG_M68020
-ifndef CONFIG_M68030
-
-ifndef CONFIG_M68060
-KBUILD_CFLAGS += -m68040
-endif
-
-ifndef CONFIG_M68040
-KBUILD_CFLAGS += -m68060
-endif
-
-endif
-endif
-
-ifdef CONFIG_KGDB
-# If configured for kgdb support, include debugging infos and keep the
-# frame pointer
-KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
-endif
-
-ifndef CONFIG_SUN3
-head-y := arch/m68k/kernel/head.o
-else
-head-y := arch/m68k/kernel/sun3-head.o
-endif
-
-core-y				+= arch/m68k/kernel/	arch/m68k/mm/
-libs-y				+= arch/m68k/lib/
-
-core-$(CONFIG_Q40)		+= arch/m68k/q40/
-core-$(CONFIG_AMIGA)		+= arch/m68k/amiga/
-core-$(CONFIG_ATARI)		+= arch/m68k/atari/
-core-$(CONFIG_MAC)		+= arch/m68k/mac/
-core-$(CONFIG_HP300)		+= arch/m68k/hp300/
-core-$(CONFIG_APOLLO)		+= arch/m68k/apollo/
-core-$(CONFIG_MVME147)		+= arch/m68k/mvme147/
-core-$(CONFIG_MVME16x)		+= arch/m68k/mvme16x/
-core-$(CONFIG_BVME6000)		+= arch/m68k/bvme6000/
-core-$(CONFIG_SUN3X)		+= arch/m68k/sun3x/	arch/m68k/sun3/
-core-$(CONFIG_SUN3)		+= arch/m68k/sun3/	arch/m68k/sun3/prom/
-core-$(CONFIG_NATFEAT)		+= arch/m68k/emu/
-core-$(CONFIG_M68040)		+= arch/m68k/fpsp040/
-core-$(CONFIG_M68060)		+= arch/m68k/ifpsp060/
-core-$(CONFIG_M68KFPU_EMU)	+= arch/m68k/math-emu/
-
-all:	zImage
-
-lilo:	vmlinux
-	if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
-	if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
-	cat vmlinux > $(INSTALL_PATH)/vmlinux
-	cp System.map $(INSTALL_PATH)/System.map
-	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
-
-zImage compressed: vmlinux.gz
-
-vmlinux.gz: vmlinux
-
-ifndef CONFIG_KGDB
-	cp vmlinux vmlinux.tmp
-	$(STRIP) vmlinux.tmp
-	gzip -9c vmlinux.tmp >vmlinux.gz
-	rm vmlinux.tmp
-else
-	gzip -9c vmlinux >vmlinux.gz
-endif
-
-bzImage: vmlinux.bz2
-
-vmlinux.bz2: vmlinux
-
-ifndef CONFIG_KGDB
-	cp vmlinux vmlinux.tmp
-	$(STRIP) vmlinux.tmp
-	bzip2 -1c vmlinux.tmp >vmlinux.bz2
-	rm vmlinux.tmp
-else
-	bzip2 -1c vmlinux >vmlinux.bz2
-endif
-
-archclean:
-	rm -f vmlinux.gz vmlinux.bz2
-
-install:
-	sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
diff --git a/arch/m68k/Makefile_no b/arch/m68k/Makefile_no
deleted file mode 100644
index 844d3f17226443..00000000000000
--- a/arch/m68k/Makefile_no
+++ /dev/null
@@ -1,124 +0,0 @@
-#
-# arch/m68k/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# (C) Copyright 2002, Greg Ungerer <gerg@snapgear.com>
-#
-
-platform-$(CONFIG_M68328)	:= 68328
-platform-$(CONFIG_M68EZ328)	:= 68EZ328
-platform-$(CONFIG_M68VZ328)	:= 68VZ328
-platform-$(CONFIG_M68360)	:= 68360
-platform-$(CONFIG_M5206)	:= 5206
-platform-$(CONFIG_M5206e)	:= 5206
-platform-$(CONFIG_M520x)	:= 520x
-platform-$(CONFIG_M523x)	:= 523x
-platform-$(CONFIG_M5249)	:= 5249
-platform-$(CONFIG_M527x)	:= 527x
-platform-$(CONFIG_M5272)	:= 5272
-platform-$(CONFIG_M528x)	:= 528x
-platform-$(CONFIG_M5307)	:= 5307
-platform-$(CONFIG_M532x)	:= 532x
-platform-$(CONFIG_M5407)	:= 5407
-platform-$(CONFIG_M54xx)	:= 54xx
-PLATFORM := $(platform-y)
-
-board-$(CONFIG_PILOT)		:= pilot
-board-$(CONFIG_UC5272)          := UC5272
-board-$(CONFIG_UC5282)          := UC5282
-board-$(CONFIG_UCSIMM)		:= ucsimm
-board-$(CONFIG_UCDIMM)		:= ucdimm
-board-$(CONFIG_UCQUICC)		:= uCquicc
-board-$(CONFIG_DRAGEN2)		:= de2
-board-$(CONFIG_ARNEWSH)		:= ARNEWSH
-board-$(CONFIG_FREESCALE)	:= FREESCALE
-board-$(CONFIG_M5235EVB)	:= M5235EVB
-board-$(CONFIG_M5271EVB)	:= M5271EVB
-board-$(CONFIG_M5275EVB)	:= M5275EVB
-board-$(CONFIG_M5282EVB)	:= M5282EVB
-board-$(CONFIG_ELITE)		:= eLITE
-board-$(CONFIG_NETtel)		:= NETtel
-board-$(CONFIG_SECUREEDGEMP3)	:= MP3
-board-$(CONFIG_CLEOPATRA)	:= CLEOPATRA
-board-$(CONFIG_senTec)		:= senTec
-board-$(CONFIG_SNEHA) 	        := SNEHA
-board-$(CONFIG_M5208EVB)	:= M5208EVB
-board-$(CONFIG_MOD5272)		:= MOD5272
-board-$(CONFIG_AVNET)           := AVNET
-board-$(CONFIG_SAVANT)		:= SAVANT
-BOARD := $(board-y)
-
-model-$(CONFIG_RAMKERNEL)	:= ram
-model-$(CONFIG_ROMKERNEL)	:= rom
-MODEL := $(model-y)
-
-#
-# Some code support is grouped together for a common cpu-subclass (for
-# example all ColdFire cpu's are very similar). Determine the sub-class
-# for the selected cpu. ONLY need to define this for the non-base member
-# of the family.
-#
-cpuclass-$(CONFIG_M5206)	:= coldfire
-cpuclass-$(CONFIG_M5206e)	:= coldfire
-cpuclass-$(CONFIG_M520x)	:= coldfire
-cpuclass-$(CONFIG_M523x)	:= coldfire
-cpuclass-$(CONFIG_M5249)	:= coldfire
-cpuclass-$(CONFIG_M527x)	:= coldfire
-cpuclass-$(CONFIG_M5272)	:= coldfire
-cpuclass-$(CONFIG_M528x)	:= coldfire
-cpuclass-$(CONFIG_M5307)	:= coldfire
-cpuclass-$(CONFIG_M532x)	:= coldfire
-cpuclass-$(CONFIG_M5407)	:= coldfire
-cpuclass-$(CONFIG_M54xx)	:= coldfire
-cpuclass-$(CONFIG_M68328)	:= 68328
-cpuclass-$(CONFIG_M68EZ328)	:= 68328
-cpuclass-$(CONFIG_M68VZ328)	:= 68328
-cpuclass-$(CONFIG_M68360)	:= 68360
-CPUCLASS := $(cpuclass-y)
-
-ifneq ($(CPUCLASS),$(PLATFORM))
-CLASSDIR := arch/m68k/platform/$(cpuclass-y)/
-endif
-
-export PLATFORM BOARD MODEL CPUCLASS
-
-#
-# Some CFLAG additions based on specific CPU type.
-#
-cflags-$(CONFIG_M5206)		:= $(call cc-option,-mcpu=5206,-m5200)
-cflags-$(CONFIG_M5206e)		:= $(call cc-option,-mcpu=5206e,-m5200)
-cflags-$(CONFIG_M520x)		:= $(call cc-option,-mcpu=5208,-m5200)
-cflags-$(CONFIG_M523x)		:= $(call cc-option,-mcpu=523x,-m5307)
-cflags-$(CONFIG_M5249)		:= $(call cc-option,-mcpu=5249,-m5200)
-cflags-$(CONFIG_M5271)		:= $(call cc-option,-mcpu=5271,-m5307)
-cflags-$(CONFIG_M5272)		:= $(call cc-option,-mcpu=5272,-m5307)
-cflags-$(CONFIG_M5275)		:= $(call cc-option,-mcpu=5275,-m5307)
-cflags-$(CONFIG_M528x)		:= $(call cc-option,-mcpu=528x,-m5307)
-cflags-$(CONFIG_M5307)		:= $(call cc-option,-mcpu=5307,-m5200)
-cflags-$(CONFIG_M532x)		:= $(call cc-option,-mcpu=532x,-m5307)
-cflags-$(CONFIG_M5407)		:= $(call cc-option,-mcpu=5407,-m5200)
-cflags-$(CONFIG_M54xx)		:= $(call cc-option,-mcpu=5475,-m5200)
-cflags-$(CONFIG_M68328)		:= -m68000
-cflags-$(CONFIG_M68EZ328)	:= -m68000
-cflags-$(CONFIG_M68VZ328)	:= -m68000
-cflags-$(CONFIG_M68360)		:= -m68332
-
-KBUILD_AFLAGS += $(cflags-y)
-
-KBUILD_CFLAGS += $(cflags-y)
-KBUILD_CFLAGS += -D__linux__
-KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
-
-head-y := arch/m68k/platform/$(cpuclass-y)/head.o
-
-core-y	+= arch/m68k/kernel/ \
-	   arch/m68k/mm/ \
-	   $(CLASSDIR) \
-	   arch/m68k/platform/$(PLATFORM)/
-libs-y	+= arch/m68k/lib/
-
-archclean:
-
diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h
index 876eec6f2b52a0..c3c5a8643e15c7 100644
--- a/arch/m68k/include/asm/entry.h
+++ b/arch/m68k/include/asm/entry.h
@@ -1,5 +1,254 @@
-#ifdef __uClinux__
-#include "entry_no.h"
+#ifndef __M68K_ENTRY_H
+#define __M68K_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>
+#endif
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ *	This allows access to the syscall arguments in registers d1-d5
+ *
+ *	 0(sp) - d1
+ *	 4(sp) - d2
+ *	 8(sp) - d3
+ *	 C(sp) - d4
+ *	10(sp) - d5
+ *	14(sp) - a0
+ *	18(sp) - a1
+ *	1C(sp) - a2
+ *	20(sp) - d0
+ *	24(sp) - orig_d0
+ *	28(sp) - stack adjustment
+ *	2C(sp) - [ sr              ] [ format & vector ]
+ *	2E(sp) - [ pc-hiword       ] [ sr              ]
+ *	30(sp) - [ pc-loword       ] [ pc-hiword       ]
+ *	32(sp) - [ format & vector ] [ pc-loword       ]
+ *		  ^^^^^^^^^^^^^^^^^   ^^^^^^^^^^^^^^^^^
+ *			M68K		  COLDFIRE
+ */
+
+/* the following macro is used when enabling interrupts */
+#if defined(MACH_ATARI_ONLY)
+	/* block out HSYNC on the atari */
+#define ALLOWINT	(~0x400)
+#define	MAX_NOINT_IPL	3
 #else
-#include "entry_mm.h"
+	/* portable version */
+#define ALLOWINT	(~0x700)
+#define	MAX_NOINT_IPL	0
+#endif /* machine compilation types */
+
+#ifdef __ASSEMBLY__
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs a3-a6 and d6-d7 are preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+#define SWITCH_STACK_SIZE	(6*4+4)	/* includes return address */
+
+#ifdef CONFIG_COLDFIRE
+#ifdef CONFIG_COLDFIRE_SW_A7
+/*
+ * This is made a little more tricky on older ColdFires. There is no
+ * separate supervisor and user stack pointers. Need to artificially
+ * construct a usp in software... When doing this we need to disable
+ * interrupts, otherwise bad things will happen.
+ */
+.globl sw_usp
+.globl sw_ksp
+
+.macro SAVE_ALL_SYS
+	move	#0x2700,%sr		/* disable intrs */
+	btst	#5,%sp@(2)		/* from user? */
+	bnes	6f			/* no, skip */
+	movel	%sp,sw_usp		/* save user sp */
+	addql	#8,sw_usp		/* remove exception */
+	movel	sw_ksp,%sp		/* kernel sp */
+	subql	#8,%sp			/* room for exception */
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+	movel	sw_usp,%a0		/* get usp */
+	movel	%a0@-,%sp@(PT_OFF_PC)	/* copy exception program counter */
+	movel	%a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
+	bra	7f
+	6:
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+	7:
+.endm
+
+.macro SAVE_ALL_INT
+	SAVE_ALL_SYS
+	moveq	#-1,%d0			/* not system call entry */
+	movel	%d0,%sp@(PT_OFF_ORIG_D0)
+.endm
+
+.macro RESTORE_USER
+	move	#0x2700,%sr		/* disable intrs */
+	movel	sw_usp,%a0		/* get usp */
+	movel	%sp@(PT_OFF_PC),%a0@-	/* copy exception program counter */
+	movel	%sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	addql	#8,%sp			/* remove exception */
+	movel	%sp,sw_ksp		/* save ksp */
+	subql	#8,sw_usp		/* set exception */
+	movel	sw_usp,%sp		/* restore usp */
+	rte
+.endm
+
+.macro RDUSP
+	movel	sw_usp,%a3
+.endm
+
+.macro WRUSP
+	movel	%a3,sw_usp
+.endm
+
+#else /* !CONFIG_COLDFIRE_SW_A7 */
+/*
+ * Modern ColdFire parts have separate supervisor and user stack
+ * pointers. Simple load and restore macros for this case.
+ */
+.macro SAVE_ALL_SYS
+	move	#0x2700,%sr		/* disable intrs */
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro SAVE_ALL_INT
+	move	#0x2700,%sr		/* disable intrs */
+	clrl	%sp@-			/* stkadj */
+	pea	-1:w			/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro RESTORE_USER
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+.macro RDUSP
+	/*move	%usp,%a3*/
+	.word	0x4e6b
+.endm
+
+.macro WRUSP
+	/*move	%a3,%usp*/
+	.word	0x4e63
+.endm
+
+#endif /* !CONFIG_COLDFIRE_SW_A7 */
+
+.macro SAVE_SWITCH_STACK
+	lea	%sp@(-24),%sp		/* 6 regs */
+	moveml	%a3-%a6/%d6-%d7,%sp@
+.endm
+
+.macro RESTORE_SWITCH_STACK
+	moveml	%sp@,%a3-%a6/%d6-%d7
+	lea	%sp@(24),%sp		/* 6 regs */
+.endm
+
+#else /* !CONFIG_COLDFIRE */
+
+/*
+ * All other types of m68k parts (68000, 680x0, CPU32) have the same
+ * entry and exit code.
+ */
+
+/*
+ * a -1 in the orig_d0 field signifies
+ * that the stack frame is NOT for syscall
+ */
+.macro SAVE_ALL_INT
+	clrl	%sp@-			/* stk_adj */
+	pea	-1:w			/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	moveml	%d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro SAVE_ALL_SYS
+	clrl	%sp@-			/* stk_adj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	moveml	%d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro RESTORE_ALL
+	moveml	%sp@+,%a0-%a2/%d1-%d5
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stk adj */
+	rte
+.endm
+
+
+.macro SAVE_SWITCH_STACK
+	moveml	%a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro RESTORE_SWITCH_STACK
+	moveml	%sp@+,%a3-%a6/%d6-%d7
+.endm
+
+#endif /* !CONFIG_COLDFIRE */
+
+/*
+ * Register %a2 is reserved and set to current task on MMU enabled systems.
+ * Non-MMU systems do not reserve %a2 in this way, and this definition is
+ * not used for them.
+ */
+#define curptr a2
+
+#define GET_CURRENT(tmp) get_current tmp
+.macro get_current reg=%d0
+	movel	%sp,\reg
+	andw	#-THREAD_SIZE,\reg
+	movel	\reg,%curptr
+	movel	%curptr@,%curptr
+.endm
+
+#else /* C source */
+
+#define STR(X) STR1(X)
+#define STR1(X) #X
+
+#define SAVE_ALL_INT				\
+	"clrl	%%sp@-;"    /* stk_adj */	\
+	"pea	-1:w;"	    /* orig d0 = -1 */	\
+	"movel	%%d0,%%sp@-;" /* d0 */		\
+	"moveml	%%d1-%%d5/%%a0-%%a2,%%sp@-"
+
+#define GET_CURRENT(tmp) \
+	"movel	%%sp,"#tmp"\n\t" \
+	"andw	#-"STR(THREAD_SIZE)","#tmp"\n\t" \
+	"movel	"#tmp",%%a2\n\t" \
+	"movel	%%a2@,%%a2"
+
 #endif
+
+#endif /* __M68K_ENTRY_H */
diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h
deleted file mode 100644
index 73b8c8fbed9cdb..00000000000000
--- a/arch/m68k/include/asm/entry_mm.h
+++ /dev/null
@@ -1,128 +0,0 @@
-#ifndef __M68K_ENTRY_H
-#define __M68K_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#ifdef __ASSEMBLY__
-#include <asm/thread_info.h>
-#endif
-
-/*
- * Stack layout in 'ret_from_exception':
- *
- *	This allows access to the syscall arguments in registers d1-d5
- *
- *	 0(sp) - d1
- *	 4(sp) - d2
- *	 8(sp) - d3
- *	 C(sp) - d4
- *	10(sp) - d5
- *	14(sp) - a0
- *	18(sp) - a1
- *	1C(sp) - a2
- *	20(sp) - d0
- *	24(sp) - orig_d0
- *	28(sp) - stack adjustment
- *	2C(sp) - sr
- *	2E(sp) - pc
- *	32(sp) - format & vector
- */
-
-/*
- * 97/05/14 Andreas: Register %a2 is now set to the current task throughout
- *		     the whole kernel.
- */
-
-/* the following macro is used when enabling interrupts */
-#if defined(MACH_ATARI_ONLY)
-	/* block out HSYNC on the atari */
-#define ALLOWINT	(~0x400)
-#define	MAX_NOINT_IPL	3
-#else
-	/* portable version */
-#define ALLOWINT	(~0x700)
-#define	MAX_NOINT_IPL	0
-#endif /* machine compilation types */
-
-#ifdef __ASSEMBLY__
-
-#define curptr a2
-
-LFLUSH_I_AND_D = 0x00000808
-
-#define SAVE_ALL_INT save_all_int
-#define SAVE_ALL_SYS save_all_sys
-#define RESTORE_ALL restore_all
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs a3-a6 and d6-d7 are preserved by C code
- * the kernel doesn't mess with usp unless it needs to
- */
-
-/*
- * a -1 in the orig_d0 field signifies
- * that the stack frame is NOT for syscall
- */
-.macro	save_all_int
-	clrl	%sp@-		| stk_adj
-	pea	-1:w		| orig d0
-	movel	%d0,%sp@-	| d0
-	moveml	%d1-%d5/%a0-%a1/%curptr,%sp@-
-.endm
-
-.macro	save_all_sys
-	clrl	%sp@-		| stk_adj
-	movel	%d0,%sp@-	| orig d0
-	movel	%d0,%sp@-	| d0
-	moveml	%d1-%d5/%a0-%a1/%curptr,%sp@-
-.endm
-
-.macro	restore_all
-	moveml	%sp@+,%a0-%a1/%curptr/%d1-%d5
-	movel	%sp@+,%d0
-	addql	#4,%sp		| orig d0
-	addl	%sp@+,%sp	| stk adj
-	rte
-.endm
-
-#define SWITCH_STACK_SIZE (6*4+4)	/* includes return address */
-
-#define SAVE_SWITCH_STACK save_switch_stack
-#define RESTORE_SWITCH_STACK restore_switch_stack
-#define GET_CURRENT(tmp) get_current tmp
-
-.macro	save_switch_stack
-	moveml	%a3-%a6/%d6-%d7,%sp@-
-.endm
-
-.macro	restore_switch_stack
-	moveml	%sp@+,%a3-%a6/%d6-%d7
-.endm
-
-.macro	get_current reg=%d0
-	movel	%sp,\reg
-	andw	#-THREAD_SIZE,\reg
-	movel	\reg,%curptr
-	movel	%curptr@,%curptr
-.endm
-
-#else /* C source */
-
-#define STR(X) STR1(X)
-#define STR1(X) #X
-
-#define SAVE_ALL_INT				\
-	"clrl	%%sp@-;"    /* stk_adj */	\
-	"pea	-1:w;"	    /* orig d0 = -1 */	\
-	"movel	%%d0,%%sp@-;" /* d0 */		\
-	"moveml	%%d1-%%d5/%%a0-%%a2,%%sp@-"
-#define GET_CURRENT(tmp) \
-	"movel	%%sp,"#tmp"\n\t" \
-	"andw	#-"STR(THREAD_SIZE)","#tmp"\n\t" \
-	"movel	"#tmp",%%a2\n\t" \
-	"movel	%%a2@,%%a2"
-
-#endif
-
-#endif /* __M68K_ENTRY_H */
diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h
deleted file mode 100644
index 68611e3dbb1d41..00000000000000
--- a/arch/m68k/include/asm/entry_no.h
+++ /dev/null
@@ -1,181 +0,0 @@
-#ifndef __M68KNOMMU_ENTRY_H
-#define __M68KNOMMU_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-/*
- * Stack layout in 'ret_from_exception':
- *
- * This allows access to the syscall arguments in registers d1-d5
- *
- *	 0(sp) - d1
- *	 4(sp) - d2
- *	 8(sp) - d3
- *	 C(sp) - d4
- *	10(sp) - d5
- *	14(sp) - a0
- *	18(sp) - a1
- *	1C(sp) - a2
- *	20(sp) - d0
- *	24(sp) - orig_d0
- *	28(sp) - stack adjustment
- *	2C(sp) - [ sr              ] [ format & vector ]
- *	2E(sp) - [ pc-hiword       ] [ sr              ]
- *	30(sp) - [ pc-loword       ] [ pc-hiword       ]
- *	32(sp) - [ format & vector ] [ pc-loword       ]
- *		  ^^^^^^^^^^^^^^^^^   ^^^^^^^^^^^^^^^^^
- *			M68K		  COLDFIRE
- */
-
-#define ALLOWINT (~0x700)
-
-#ifdef __ASSEMBLY__
-
-#define SWITCH_STACK_SIZE (6*4+4)	/* Includes return address */
-
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs are a2-a6 and d6-d7 preserved by C code
- * the kernel doesn't mess with usp unless it needs to
- */
-
-#ifdef CONFIG_COLDFIRE
-#ifdef CONFIG_COLDFIRE_SW_A7
-/*
- * This is made a little more tricky on older ColdFires. There is no
- * separate supervisor and user stack pointers. Need to artificially
- * construct a usp in software... When doing this we need to disable
- * interrupts, otherwise bad things will happen.
- */
-.globl sw_usp
-.globl sw_ksp
-
-.macro SAVE_ALL
-	move	#0x2700,%sr		/* disable intrs */
-	btst	#5,%sp@(2)		/* from user? */
-	bnes	6f			/* no, skip */
-	movel	%sp,sw_usp		/* save user sp */
-	addql	#8,sw_usp		/* remove exception */
-	movel	sw_ksp,%sp		/* kernel sp */
-	subql	#8,%sp			/* room for exception */
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-	movel	sw_usp,%a0		/* get usp */
-	movel	%a0@-,%sp@(PT_OFF_PC)	/* copy exception program counter */
-	movel	%a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
-	bra	7f
-	6:
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-	7:
-.endm
-
-.macro RESTORE_USER
-	move	#0x2700,%sr		/* disable intrs */
-	movel	sw_usp,%a0		/* get usp */
-	movel	%sp@(PT_OFF_PC),%a0@-	/* copy exception program counter */
-	movel	%sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	addql	#8,%sp			/* remove exception */
-	movel	%sp,sw_ksp		/* save ksp */
-	subql	#8,sw_usp		/* set exception */
-	movel	sw_usp,%sp		/* restore usp */
-	rte
-.endm
-
-.macro RDUSP
-	movel	sw_usp,%a3
-.endm
-
-.macro WRUSP
-	movel	%a3,sw_usp
-.endm
-
-#else /* !CONFIG_COLDFIRE_SW_A7 */
-/*
- * Modern ColdFire parts have separate supervisor and user stack
- * pointers. Simple load and restore macros for this case.
- */
-.macro SAVE_ALL
-	move	#0x2700,%sr		/* disable intrs */
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-.endm
-
-.macro RESTORE_USER
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	rte
-.endm
-
-.macro RDUSP
-	/*move	%usp,%a3*/
-	.word	0x4e6b
-.endm
-
-.macro WRUSP
-	/*move	%a3,%usp*/
-	.word	0x4e63
-.endm
-
-#endif /* !CONFIG_COLDFIRE_SW_A7 */
-
-.macro SAVE_SWITCH_STACK
-	lea	%sp@(-24),%sp		/* 6 regs */
-	moveml	%a3-%a6/%d6-%d7,%sp@
-.endm
-
-.macro RESTORE_SWITCH_STACK
-	moveml	%sp@,%a3-%a6/%d6-%d7
-	lea	%sp@(24),%sp		/* 6 regs */
-.endm
-
-#else /* !CONFIG_COLDFIRE */
-
-/*
- * Standard 68k interrupt entry and exit macros.
- */
-.macro SAVE_ALL
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	moveml	%d1-%d5/%a0-%a2,%sp@-
-.endm
-
-.macro RESTORE_ALL
-	moveml	%sp@+,%a0-%a2/%d1-%d5
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	rte
-.endm
-
-.macro SAVE_SWITCH_STACK
-	moveml	%a3-%a6/%d6-%d7,%sp@-
-.endm
-
-.macro RESTORE_SWITCH_STACK
-	moveml	%sp@+,%a3-%a6/%d6-%d7
-.endm
-
-#endif /* !COLDFIRE_SW_A7 */
-#endif /* __ASSEMBLY__ */
-#endif /* __M68KNOMMU_ENTRY_H */
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index b6bf2c518baccd..eda62de7e607ae 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -90,15 +90,13 @@
 #define MCFGPIO_PDDR_FECH		0xFC0A4013
 #define MCFGPIO_PDDR_FECL		0xFC0A4014
 
-#define MCFGPIO_PPDSDR_BUSCTL		0xFC0A401A
-#define MCFGPIO_PPDSDR_BE		0xFC0A401B
-#define MCFGPIO_PPDSDR_CS		0xFC0A401C
-#define MCFGPIO_PPDSDR_FECI2C		0xFC0A401D
-#define MCFGPIO_PPDSDR_QSPI		0xFC0A401E
-#define MCFGPIO_PPDSDR_TIMER		0xFC0A401F
-#define MCFGPIO_PPDSDR_UART		0xFC0A4021
-#define MCFGPIO_PPDSDR_FECH		0xFC0A4021
-#define MCFGPIO_PPDSDR_FECL		0xFC0A4022
+#define MCFGPIO_PPDSDR_CS		0xFC0A401A
+#define MCFGPIO_PPDSDR_FECI2C		0xFC0A401B
+#define MCFGPIO_PPDSDR_QSPI		0xFC0A401C
+#define MCFGPIO_PPDSDR_TIMER		0xFC0A401D
+#define MCFGPIO_PPDSDR_UART		0xFC0A401E
+#define MCFGPIO_PPDSDR_FECH		0xFC0A401F
+#define MCFGPIO_PPDSDR_FECL		0xFC0A4020
 
 #define MCFGPIO_PCLRR_BUSCTL		0xFC0A4024
 #define MCFGPIO_PCLRR_BE		0xFC0A4025
@@ -113,11 +111,11 @@
 /*
  * Generic GPIO support
  */
-#define MCFGPIO_PODR			MCFGPIO_PODR_BUSCTL
-#define MCFGPIO_PDDR			MCFGPIO_PDDR_BUSCTL
-#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_BUSCTL
-#define MCFGPIO_SETR			MCFGPIO_PPDSDR_BUSCTL
-#define MCFGPIO_CLRR			MCFGPIO_PCLRR_BUSCTL
+#define MCFGPIO_PODR			MCFGPIO_PODR_CS
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_CS
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_CS
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_CS
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_CS
 
 #define MCFGPIO_PIN_MAX			80
 #define MCFGPIO_IRQ_MAX			8
diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h
index 39d90d51111d76..7fe631972f1f51 100644
--- a/arch/m68k/include/asm/mcfqspi.h
+++ b/arch/m68k/include/asm/mcfqspi.h
@@ -24,9 +24,11 @@
 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
 #define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
 #elif defined(CONFIG_M5249)
-#define MCFQSPI_IOBASE		(MCF_MBAR + 0x300)
-#elif defined(CONFIG_M520x) || defined(CONFIG_M532x)
-#define MCFQSPI_IOBASE		0xFC058000
+#define MCFQSPI_IOBASE         (MCF_MBAR + 0x300)
+#elif defined(CONFIG_M520x)
+#define MCFQSPI_IOBASE         0xFC05C000
+#elif defined(CONFIG_M532x)
+#define MCFQSPI_IOBASE         0xFC058000
 #endif
 #define MCFQSPI_IOSIZE		0x40
 
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index 90595721185fc2..a8d1c60eb9cec8 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -5,6 +5,9 @@
  
 extern unsigned long memory_start;
 extern unsigned long memory_end;
+extern unsigned long _rambase;
+extern unsigned long _ramstart;
+extern unsigned long _ramend;
 
 #define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
 #define free_user_page(page, addr)	free_page(addr)
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index d8ef53ac03f92f..568facf3027669 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -135,6 +135,12 @@ do {                                                    \
 	wrusp(_usp);                                    \
 } while(0)
 
+static inline  int handle_kernel_fault(struct pt_regs *regs)
+{
+	/* Any fault in kernel is fatal on non-mmu */
+	return 0;
+}
+
 #endif
 
 /* Forward declaration, a strange C thing */
diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h
index d64967ecfec647..5277e52715ec27 100644
--- a/arch/m68k/include/asm/sections.h
+++ b/arch/m68k/include/asm/sections.h
@@ -3,4 +3,6 @@
 
 #include <asm-generic/sections.h>
 
+extern char _sbss[], _ebss[];
+
 #endif /* _ASM_M68K_SECTIONS_H */
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index c482ebc9dd5435..e7f0f2e5ad4478 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -1,5 +1,21 @@
-ifdef CONFIG_MMU
-include arch/m68k/kernel/Makefile_mm
-else
-include arch/m68k/kernel/Makefile_no
+#
+# Makefile for the linux kernel.
+#
+
+extra-$(CONFIG_MMU)	:= head.o
+extra-$(CONFIG_SUN3)	:= sun3-head.o
+extra-y			+= vmlinux.lds
+
+obj-y	:= entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \
+	   sys_m68k.o syscalltable.o time.o traps.o
+
+obj-$(CONFIG_MMU)	+= ints.o devres.o vectors.o
+devres-$(CONFIG_MMU)	= ../../../kernel/irq/devres.o
+
+ifndef CONFIG_MMU_SUN3
+obj-y			+= dma.o
 endif
+ifndef CONFIG_MMU
+obj-y			+= init_task.o irq.o
+endif
+
diff --git a/arch/m68k/kernel/Makefile_mm b/arch/m68k/kernel/Makefile_mm
deleted file mode 100644
index aced678045799b..00000000000000
--- a/arch/m68k/kernel/Makefile_mm
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-ifndef CONFIG_SUN3
-  extra-y := head.o
-else
-  extra-y := sun3-head.o
-endif
-extra-y	+= vmlinux.lds
-
-obj-y	:= entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
-	   sys_m68k.o time.o setup.o m68k_ksyms.o devres.o syscalltable.o
-
-devres-y = ../../../kernel/irq/devres.o
-
-obj-y$(CONFIG_MMU_SUN3) += dma.o	# no, it's not a typo
diff --git a/arch/m68k/kernel/Makefile_no b/arch/m68k/kernel/Makefile_no
deleted file mode 100644
index 37c3fc074c0aaa..00000000000000
--- a/arch/m68k/kernel/Makefile_no
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for arch/m68knommu/kernel.
-#
-
-extra-y := vmlinux.lds
-
-obj-y += dma.o entry.o init_task.o irq.o m68k_ksyms.o process.o ptrace.o \
-	 setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o
-
-obj-$(CONFIG_MODULES)	+= module.o
diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S
index 5f0f6b598b5a6d..1b4289061a64a6 100644
--- a/arch/m68k/kernel/entry_no.S
+++ b/arch/m68k/kernel/entry_no.S
@@ -43,7 +43,7 @@
 .globl sys_vfork
 
 ENTRY(buserr)
-	SAVE_ALL
+	SAVE_ALL_INT
 	moveq	#-1,%d0
 	movel	%d0,%sp@(PT_OFF_ORIG_D0)
 	movel	%sp,%sp@- 		/* stack frame pointer argument */
@@ -52,7 +52,7 @@ ENTRY(buserr)
 	jra	ret_from_exception
 
 ENTRY(trap)
-	SAVE_ALL
+	SAVE_ALL_INT
 	moveq	#-1,%d0
 	movel	%d0,%sp@(PT_OFF_ORIG_D0)
 	movel	%sp,%sp@- 		/* stack frame pointer argument */
@@ -64,7 +64,7 @@ ENTRY(trap)
 
 .globl dbginterrupt
 ENTRY(dbginterrupt)
-	SAVE_ALL
+	SAVE_ALL_INT
 	moveq	#-1,%d0
 	movel	%d0,%sp@(PT_OFF_ORIG_D0)
 	movel	%sp,%sp@- 		/* stack frame pointer argument */
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 16b2de7f51013b..2ed8c0fb1517de 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -36,6 +36,7 @@
 #include <asm/irq.h>
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
+#include <asm/sections.h>
 
 unsigned long memory_start;
 unsigned long memory_end;
@@ -80,9 +81,6 @@ void (*mach_power_off)(void);
 #define	CPU_INSTR_PER_JIFFY	16
 #endif
 
-extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
-extern int _ramstart, _ramend;
-
 #if defined(CONFIG_UBOOT)
 /*
  * parse_uboot_commandline
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index c98add3f5f0f45..89362f2bb56a3e 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -1,5 +1,1107 @@
-#ifdef CONFIG_MMU
-#include "traps_mm.c"
+/*
+ *  linux/arch/m68k/kernel/traps.c
+ *
+ *  Copyright (C) 1993, 1994 by Hamish Macdonald
+ *
+ *  68040 fixes by Michael Rausch
+ *  68040 fixes by Martin Apel
+ *  68040 fixes and writeback by Richard Zidlicky
+ *  68060 fixes by Roman Hodek
+ *  68060 fixes by Jesper Skov
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * Sets up all exception vectors
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/user.h>
+#include <linux/string.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/kallsyms.h>
+
+#include <asm/setup.h>
+#include <asm/fpu.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/traps.h>
+#include <asm/pgalloc.h>
+#include <asm/machdep.h>
+#include <asm/siginfo.h>
+
+
+static const char *vec_names[] = {
+	[VEC_RESETSP]	= "RESET SP",
+	[VEC_RESETPC]	= "RESET PC",
+	[VEC_BUSERR]	= "BUS ERROR",
+	[VEC_ADDRERR]	= "ADDRESS ERROR",
+	[VEC_ILLEGAL]	= "ILLEGAL INSTRUCTION",
+	[VEC_ZERODIV]	= "ZERO DIVIDE",
+	[VEC_CHK]	= "CHK",
+	[VEC_TRAP]	= "TRAPcc",
+	[VEC_PRIV]	= "PRIVILEGE VIOLATION",
+	[VEC_TRACE]	= "TRACE",
+	[VEC_LINE10]	= "LINE 1010",
+	[VEC_LINE11]	= "LINE 1111",
+	[VEC_RESV12]	= "UNASSIGNED RESERVED 12",
+	[VEC_COPROC]	= "COPROCESSOR PROTOCOL VIOLATION",
+	[VEC_FORMAT]	= "FORMAT ERROR",
+	[VEC_UNINT]	= "UNINITIALIZED INTERRUPT",
+	[VEC_RESV16]	= "UNASSIGNED RESERVED 16",
+	[VEC_RESV17]	= "UNASSIGNED RESERVED 17",
+	[VEC_RESV18]	= "UNASSIGNED RESERVED 18",
+	[VEC_RESV19]	= "UNASSIGNED RESERVED 19",
+	[VEC_RESV20]	= "UNASSIGNED RESERVED 20",
+	[VEC_RESV21]	= "UNASSIGNED RESERVED 21",
+	[VEC_RESV22]	= "UNASSIGNED RESERVED 22",
+	[VEC_RESV23]	= "UNASSIGNED RESERVED 23",
+	[VEC_SPUR]	= "SPURIOUS INTERRUPT",
+	[VEC_INT1]	= "LEVEL 1 INT",
+	[VEC_INT2]	= "LEVEL 2 INT",
+	[VEC_INT3]	= "LEVEL 3 INT",
+	[VEC_INT4]	= "LEVEL 4 INT",
+	[VEC_INT5]	= "LEVEL 5 INT",
+	[VEC_INT6]	= "LEVEL 6 INT",
+	[VEC_INT7]	= "LEVEL 7 INT",
+	[VEC_SYS]	= "SYSCALL",
+	[VEC_TRAP1]	= "TRAP #1",
+	[VEC_TRAP2]	= "TRAP #2",
+	[VEC_TRAP3]	= "TRAP #3",
+	[VEC_TRAP4]	= "TRAP #4",
+	[VEC_TRAP5]	= "TRAP #5",
+	[VEC_TRAP6]	= "TRAP #6",
+	[VEC_TRAP7]	= "TRAP #7",
+	[VEC_TRAP8]	= "TRAP #8",
+	[VEC_TRAP9]	= "TRAP #9",
+	[VEC_TRAP10]	= "TRAP #10",
+	[VEC_TRAP11]	= "TRAP #11",
+	[VEC_TRAP12]	= "TRAP #12",
+	[VEC_TRAP13]	= "TRAP #13",
+	[VEC_TRAP14]	= "TRAP #14",
+	[VEC_TRAP15]	= "TRAP #15",
+	[VEC_FPBRUC]	= "FPCP BSUN",
+	[VEC_FPIR]	= "FPCP INEXACT",
+	[VEC_FPDIVZ]	= "FPCP DIV BY 0",
+	[VEC_FPUNDER]	= "FPCP UNDERFLOW",
+	[VEC_FPOE]	= "FPCP OPERAND ERROR",
+	[VEC_FPOVER]	= "FPCP OVERFLOW",
+	[VEC_FPNAN]	= "FPCP SNAN",
+	[VEC_FPUNSUP]	= "FPCP UNSUPPORTED OPERATION",
+	[VEC_MMUCFG]	= "MMU CONFIGURATION ERROR",
+	[VEC_MMUILL]	= "MMU ILLEGAL OPERATION ERROR",
+	[VEC_MMUACC]	= "MMU ACCESS LEVEL VIOLATION ERROR",
+	[VEC_RESV59]	= "UNASSIGNED RESERVED 59",
+	[VEC_UNIMPEA]	= "UNASSIGNED RESERVED 60",
+	[VEC_UNIMPII]	= "UNASSIGNED RESERVED 61",
+	[VEC_RESV62]	= "UNASSIGNED RESERVED 62",
+	[VEC_RESV63]	= "UNASSIGNED RESERVED 63",
+};
+
+static const char *space_names[] = {
+	[0]		= "Space 0",
+	[USER_DATA]	= "User Data",
+	[USER_PROGRAM]	= "User Program",
+#ifndef CONFIG_SUN3
+	[3]		= "Space 3",
 #else
-#include "traps_no.c"
+	[FC_CONTROL]	= "Control",
+#endif
+	[4]		= "Space 4",
+	[SUPER_DATA]	= "Super Data",
+	[SUPER_PROGRAM]	= "Super Program",
+	[CPU_SPACE]	= "CPU"
+};
+
+void die_if_kernel(char *,struct pt_regs *,int);
+asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
+                             unsigned long error_code);
+int send_fault_sig(struct pt_regs *regs);
+
+asmlinkage void trap_c(struct frame *fp);
+
+#if defined (CONFIG_M68060)
+static inline void access_error060 (struct frame *fp)
+{
+	unsigned long fslw = fp->un.fmt4.pc; /* is really FSLW for access error */
+
+#ifdef DEBUG
+	printk("fslw=%#lx, fa=%#lx\n", fslw, fp->un.fmt4.effaddr);
+#endif
+
+	if (fslw & MMU060_BPE) {
+		/* branch prediction error -> clear branch cache */
+		__asm__ __volatile__ ("movec %/cacr,%/d0\n\t"
+				      "orl   #0x00400000,%/d0\n\t"
+				      "movec %/d0,%/cacr"
+				      : : : "d0" );
+		/* return if there's no other error */
+		if (!(fslw & MMU060_ERR_BITS) && !(fslw & MMU060_SEE))
+			return;
+	}
+
+	if (fslw & (MMU060_DESC_ERR | MMU060_WP | MMU060_SP)) {
+		unsigned long errorcode;
+		unsigned long addr = fp->un.fmt4.effaddr;
+
+		if (fslw & MMU060_MA)
+			addr = (addr + PAGE_SIZE - 1) & PAGE_MASK;
+
+		errorcode = 1;
+		if (fslw & MMU060_DESC_ERR) {
+			__flush_tlb040_one(addr);
+			errorcode = 0;
+		}
+		if (fslw & MMU060_W)
+			errorcode |= 2;
+#ifdef DEBUG
+		printk("errorcode = %d\n", errorcode );
+#endif
+		do_page_fault(&fp->ptregs, addr, errorcode);
+	} else if (fslw & (MMU060_SEE)){
+		/* Software Emulation Error.
+		 * fault during mem_read/mem_write in ifpsp060/os.S
+		 */
+		send_fault_sig(&fp->ptregs);
+	} else if (!(fslw & (MMU060_RE|MMU060_WE)) ||
+		   send_fault_sig(&fp->ptregs) > 0) {
+		printk("pc=%#lx, fa=%#lx\n", fp->ptregs.pc, fp->un.fmt4.effaddr);
+		printk( "68060 access error, fslw=%lx\n", fslw );
+		trap_c( fp );
+	}
+}
+#endif /* CONFIG_M68060 */
+
+#if defined (CONFIG_M68040)
+static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs)
+{
+	unsigned long mmusr;
+	mm_segment_t old_fs = get_fs();
+
+	set_fs(MAKE_MM_SEG(wbs));
+
+	if (iswrite)
+		asm volatile (".chip 68040; ptestw (%0); .chip 68k" : : "a" (addr));
+	else
+		asm volatile (".chip 68040; ptestr (%0); .chip 68k" : : "a" (addr));
+
+	asm volatile (".chip 68040; movec %%mmusr,%0; .chip 68k" : "=r" (mmusr));
+
+	set_fs(old_fs);
+
+	return mmusr;
+}
+
+static inline int do_040writeback1(unsigned short wbs, unsigned long wba,
+				   unsigned long wbd)
+{
+	int res = 0;
+	mm_segment_t old_fs = get_fs();
+
+	/* set_fs can not be moved, otherwise put_user() may oops */
+	set_fs(MAKE_MM_SEG(wbs));
+
+	switch (wbs & WBSIZ_040) {
+	case BA_SIZE_BYTE:
+		res = put_user(wbd & 0xff, (char __user *)wba);
+		break;
+	case BA_SIZE_WORD:
+		res = put_user(wbd & 0xffff, (short __user *)wba);
+		break;
+	case BA_SIZE_LONG:
+		res = put_user(wbd, (int __user *)wba);
+		break;
+	}
+
+	/* set_fs can not be moved, otherwise put_user() may oops */
+	set_fs(old_fs);
+
+
+#ifdef DEBUG
+	printk("do_040writeback1, res=%d\n",res);
+#endif
+
+	return res;
+}
+
+/* after an exception in a writeback the stack frame corresponding
+ * to that exception is discarded, set a few bits in the old frame
+ * to simulate what it should look like
+ */
+static inline void fix_xframe040(struct frame *fp, unsigned long wba, unsigned short wbs)
+{
+	fp->un.fmt7.faddr = wba;
+	fp->un.fmt7.ssw = wbs & 0xff;
+	if (wba != current->thread.faddr)
+	    fp->un.fmt7.ssw |= MA_040;
+}
+
+static inline void do_040writebacks(struct frame *fp)
+{
+	int res = 0;
+#if 0
+	if (fp->un.fmt7.wb1s & WBV_040)
+		printk("access_error040: cannot handle 1st writeback. oops.\n");
+#endif
+
+	if ((fp->un.fmt7.wb2s & WBV_040) &&
+	    !(fp->un.fmt7.wb2s & WBTT_040)) {
+		res = do_040writeback1(fp->un.fmt7.wb2s, fp->un.fmt7.wb2a,
+				       fp->un.fmt7.wb2d);
+		if (res)
+			fix_xframe040(fp, fp->un.fmt7.wb2a, fp->un.fmt7.wb2s);
+		else
+			fp->un.fmt7.wb2s = 0;
+	}
+
+	/* do the 2nd wb only if the first one was successful (except for a kernel wb) */
+	if (fp->un.fmt7.wb3s & WBV_040 && (!res || fp->un.fmt7.wb3s & 4)) {
+		res = do_040writeback1(fp->un.fmt7.wb3s, fp->un.fmt7.wb3a,
+				       fp->un.fmt7.wb3d);
+		if (res)
+		    {
+			fix_xframe040(fp, fp->un.fmt7.wb3a, fp->un.fmt7.wb3s);
+
+			fp->un.fmt7.wb2s = fp->un.fmt7.wb3s;
+			fp->un.fmt7.wb3s &= (~WBV_040);
+			fp->un.fmt7.wb2a = fp->un.fmt7.wb3a;
+			fp->un.fmt7.wb2d = fp->un.fmt7.wb3d;
+		    }
+		else
+			fp->un.fmt7.wb3s = 0;
+	}
+
+	if (res)
+		send_fault_sig(&fp->ptregs);
+}
+
+/*
+ * called from sigreturn(), must ensure userspace code didn't
+ * manipulate exception frame to circumvent protection, then complete
+ * pending writebacks
+ * we just clear TM2 to turn it into a userspace access
+ */
+asmlinkage void berr_040cleanup(struct frame *fp)
+{
+	fp->un.fmt7.wb2s &= ~4;
+	fp->un.fmt7.wb3s &= ~4;
+
+	do_040writebacks(fp);
+}
+
+static inline void access_error040(struct frame *fp)
+{
+	unsigned short ssw = fp->un.fmt7.ssw;
+	unsigned long mmusr;
+
+#ifdef DEBUG
+	printk("ssw=%#x, fa=%#lx\n", ssw, fp->un.fmt7.faddr);
+        printk("wb1s=%#x, wb2s=%#x, wb3s=%#x\n", fp->un.fmt7.wb1s,
+		fp->un.fmt7.wb2s, fp->un.fmt7.wb3s);
+	printk ("wb2a=%lx, wb3a=%lx, wb2d=%lx, wb3d=%lx\n",
+		fp->un.fmt7.wb2a, fp->un.fmt7.wb3a,
+		fp->un.fmt7.wb2d, fp->un.fmt7.wb3d);
+#endif
+
+	if (ssw & ATC_040) {
+		unsigned long addr = fp->un.fmt7.faddr;
+		unsigned long errorcode;
+
+		/*
+		 * The MMU status has to be determined AFTER the address
+		 * has been corrected if there was a misaligned access (MA).
+		 */
+		if (ssw & MA_040)
+			addr = (addr + 7) & -8;
+
+		/* MMU error, get the MMUSR info for this access */
+		mmusr = probe040(!(ssw & RW_040), addr, ssw);
+#ifdef DEBUG
+		printk("mmusr = %lx\n", mmusr);
+#endif
+		errorcode = 1;
+		if (!(mmusr & MMU_R_040)) {
+			/* clear the invalid atc entry */
+			__flush_tlb040_one(addr);
+			errorcode = 0;
+		}
+
+		/* despite what documentation seems to say, RMW
+		 * accesses have always both the LK and RW bits set */
+		if (!(ssw & RW_040) || (ssw & LK_040))
+			errorcode |= 2;
+
+		if (do_page_fault(&fp->ptregs, addr, errorcode)) {
+#ifdef DEBUG
+			printk("do_page_fault() !=0\n");
+#endif
+			if (user_mode(&fp->ptregs)){
+				/* delay writebacks after signal delivery */
+#ifdef DEBUG
+			        printk(".. was usermode - return\n");
+#endif
+				return;
+			}
+			/* disable writeback into user space from kernel
+			 * (if do_page_fault didn't fix the mapping,
+                         * the writeback won't do good)
+			 */
+disable_wb:
+#ifdef DEBUG
+			printk(".. disabling wb2\n");
+#endif
+			if (fp->un.fmt7.wb2a == fp->un.fmt7.faddr)
+				fp->un.fmt7.wb2s &= ~WBV_040;
+			if (fp->un.fmt7.wb3a == fp->un.fmt7.faddr)
+				fp->un.fmt7.wb3s &= ~WBV_040;
+		}
+	} else {
+		/* In case of a bus error we either kill the process or expect
+		 * the kernel to catch the fault, which then is also responsible
+		 * for cleaning up the mess.
+		 */
+		current->thread.signo = SIGBUS;
+		current->thread.faddr = fp->un.fmt7.faddr;
+		if (send_fault_sig(&fp->ptregs) >= 0)
+			printk("68040 bus error (ssw=%x, faddr=%lx)\n", ssw,
+			       fp->un.fmt7.faddr);
+		goto disable_wb;
+	}
+
+	do_040writebacks(fp);
+}
+#endif /* CONFIG_M68040 */
+
+#if defined(CONFIG_SUN3)
+#include <asm/sun3mmu.h>
+
+extern int mmu_emu_handle_fault (unsigned long, int, int);
+
+/* sun3 version of bus_error030 */
+
+static inline void bus_error030 (struct frame *fp)
+{
+	unsigned char buserr_type = sun3_get_buserr ();
+	unsigned long addr, errorcode;
+	unsigned short ssw = fp->un.fmtb.ssw;
+	extern unsigned long _sun3_map_test_start, _sun3_map_test_end;
+
+#ifdef DEBUG
+	if (ssw & (FC | FB))
+		printk ("Instruction fault at %#010lx\n",
+			ssw & FC ?
+			fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2
+			:
+			fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr);
+	if (ssw & DF)
+		printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
+			ssw & RW ? "read" : "write",
+			fp->un.fmtb.daddr,
+			space_names[ssw & DFC], fp->ptregs.pc);
+#endif
+
+	/*
+	 * Check if this page should be demand-mapped. This needs to go before
+	 * the testing for a bad kernel-space access (demand-mapping applies
+	 * to kernel accesses too).
+	 */
+
+	if ((ssw & DF)
+	    && (buserr_type & (SUN3_BUSERR_PROTERR | SUN3_BUSERR_INVALID))) {
+		if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 0))
+			return;
+	}
+
+	/* Check for kernel-space pagefault (BAD). */
+	if (fp->ptregs.sr & PS_S) {
+		/* kernel fault must be a data fault to user space */
+		if (! ((ssw & DF) && ((ssw & DFC) == USER_DATA))) {
+		     // try checking the kernel mappings before surrender
+		     if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 1))
+			  return;
+			/* instruction fault or kernel data fault! */
+			if (ssw & (FC | FB))
+				printk ("Instruction fault at %#010lx\n",
+					fp->ptregs.pc);
+			if (ssw & DF) {
+				/* was this fault incurred testing bus mappings? */
+				if((fp->ptregs.pc >= (unsigned long)&_sun3_map_test_start) &&
+				   (fp->ptregs.pc <= (unsigned long)&_sun3_map_test_end)) {
+					send_fault_sig(&fp->ptregs);
+					return;
+				}
+
+				printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
+					ssw & RW ? "read" : "write",
+					fp->un.fmtb.daddr,
+					space_names[ssw & DFC], fp->ptregs.pc);
+			}
+			printk ("BAD KERNEL BUSERR\n");
+
+			die_if_kernel("Oops", &fp->ptregs,0);
+			force_sig(SIGKILL, current);
+			return;
+		}
+	} else {
+		/* user fault */
+		if (!(ssw & (FC | FB)) && !(ssw & DF))
+			/* not an instruction fault or data fault! BAD */
+			panic ("USER BUSERR w/o instruction or data fault");
+	}
+
+
+	/* First handle the data fault, if any.  */
+	if (ssw & DF) {
+		addr = fp->un.fmtb.daddr;
+
+// errorcode bit 0:	0 -> no page		1 -> protection fault
+// errorcode bit 1:	0 -> read fault		1 -> write fault
+
+// (buserr_type & SUN3_BUSERR_PROTERR)	-> protection fault
+// (buserr_type & SUN3_BUSERR_INVALID)	-> invalid page fault
+
+		if (buserr_type & SUN3_BUSERR_PROTERR)
+			errorcode = 0x01;
+		else if (buserr_type & SUN3_BUSERR_INVALID)
+			errorcode = 0x00;
+		else {
+#ifdef DEBUG
+			printk ("*** unexpected busfault type=%#04x\n", buserr_type);
+			printk ("invalid %s access at %#lx from pc %#lx\n",
+				!(ssw & RW) ? "write" : "read", addr,
+				fp->ptregs.pc);
+#endif
+			die_if_kernel ("Oops", &fp->ptregs, buserr_type);
+			force_sig (SIGBUS, current);
+			return;
+		}
+
+//todo: wtf is RM bit? --m
+		if (!(ssw & RW) || ssw & RM)
+			errorcode |= 0x02;
+
+		/* Handle page fault. */
+		do_page_fault (&fp->ptregs, addr, errorcode);
+
+		/* Retry the data fault now. */
+		return;
+	}
+
+	/* Now handle the instruction fault. */
+
+	/* Get the fault address. */
+	if (fp->ptregs.format == 0xA)
+		addr = fp->ptregs.pc + 4;
+	else
+		addr = fp->un.fmtb.baddr;
+	if (ssw & FC)
+		addr -= 2;
+
+	if (buserr_type & SUN3_BUSERR_INVALID) {
+		if (!mmu_emu_handle_fault (fp->un.fmtb.daddr, 1, 0))
+			do_page_fault (&fp->ptregs, addr, 0);
+       } else {
+#ifdef DEBUG
+		printk ("protection fault on insn access (segv).\n");
+#endif
+		force_sig (SIGSEGV, current);
+       }
+}
+#else
+#if defined(CPU_M68020_OR_M68030)
+static inline void bus_error030 (struct frame *fp)
+{
+	volatile unsigned short temp;
+	unsigned short mmusr;
+	unsigned long addr, errorcode;
+	unsigned short ssw = fp->un.fmtb.ssw;
+#ifdef DEBUG
+	unsigned long desc;
+
+	printk ("pid = %x  ", current->pid);
+	printk ("SSW=%#06x  ", ssw);
+
+	if (ssw & (FC | FB))
+		printk ("Instruction fault at %#010lx\n",
+			ssw & FC ?
+			fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2
+			:
+			fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr);
+	if (ssw & DF)
+		printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
+			ssw & RW ? "read" : "write",
+			fp->un.fmtb.daddr,
+			space_names[ssw & DFC], fp->ptregs.pc);
+#endif
+
+	/* ++andreas: If a data fault and an instruction fault happen
+	   at the same time map in both pages.  */
+
+	/* First handle the data fault, if any.  */
+	if (ssw & DF) {
+		addr = fp->un.fmtb.daddr;
+
+#ifdef DEBUG
+		asm volatile ("ptestr %3,%2@,#7,%0\n\t"
+			      "pmove %%psr,%1@"
+			      : "=a&" (desc)
+			      : "a" (&temp), "a" (addr), "d" (ssw));
+#else
+		asm volatile ("ptestr %2,%1@,#7\n\t"
+			      "pmove %%psr,%0@"
+			      : : "a" (&temp), "a" (addr), "d" (ssw));
+#endif
+		mmusr = temp;
+
+#ifdef DEBUG
+		printk("mmusr is %#x for addr %#lx in task %p\n",
+		       mmusr, addr, current);
+		printk("descriptor address is %#lx, contents %#lx\n",
+		       __va(desc), *(unsigned long *)__va(desc));
+#endif
+
+		errorcode = (mmusr & MMU_I) ? 0 : 1;
+		if (!(ssw & RW) || (ssw & RM))
+			errorcode |= 2;
+
+		if (mmusr & (MMU_I | MMU_WP)) {
+			if (ssw & 4) {
+				printk("Data %s fault at %#010lx in %s (pc=%#lx)\n",
+				       ssw & RW ? "read" : "write",
+				       fp->un.fmtb.daddr,
+				       space_names[ssw & DFC], fp->ptregs.pc);
+				goto buserr;
+			}
+			/* Don't try to do anything further if an exception was
+			   handled. */
+			if (do_page_fault (&fp->ptregs, addr, errorcode) < 0)
+				return;
+		} else if (!(mmusr & MMU_I)) {
+			/* probably a 020 cas fault */
+			if (!(ssw & RM) && send_fault_sig(&fp->ptregs) > 0)
+				printk("unexpected bus error (%#x,%#x)\n", ssw, mmusr);
+		} else if (mmusr & (MMU_B|MMU_L|MMU_S)) {
+			printk("invalid %s access at %#lx from pc %#lx\n",
+			       !(ssw & RW) ? "write" : "read", addr,
+			       fp->ptregs.pc);
+			die_if_kernel("Oops",&fp->ptregs,mmusr);
+			force_sig(SIGSEGV, current);
+			return;
+		} else {
+#if 0
+			static volatile long tlong;
+#endif
+
+			printk("weird %s access at %#lx from pc %#lx (ssw is %#x)\n",
+			       !(ssw & RW) ? "write" : "read", addr,
+			       fp->ptregs.pc, ssw);
+			asm volatile ("ptestr #1,%1@,#0\n\t"
+				      "pmove %%psr,%0@"
+				      : /* no outputs */
+				      : "a" (&temp), "a" (addr));
+			mmusr = temp;
+
+			printk ("level 0 mmusr is %#x\n", mmusr);
+#if 0
+			asm volatile ("pmove %%tt0,%0@"
+				      : /* no outputs */
+				      : "a" (&tlong));
+			printk("tt0 is %#lx, ", tlong);
+			asm volatile ("pmove %%tt1,%0@"
+				      : /* no outputs */
+				      : "a" (&tlong));
+			printk("tt1 is %#lx\n", tlong);
+#endif
+#ifdef DEBUG
+			printk("Unknown SIGSEGV - 1\n");
+#endif
+			die_if_kernel("Oops",&fp->ptregs,mmusr);
+			force_sig(SIGSEGV, current);
+			return;
+		}
+
+		/* setup an ATC entry for the access about to be retried */
+		if (!(ssw & RW) || (ssw & RM))
+			asm volatile ("ploadw %1,%0@" : /* no outputs */
+				      : "a" (addr), "d" (ssw));
+		else
+			asm volatile ("ploadr %1,%0@" : /* no outputs */
+				      : "a" (addr), "d" (ssw));
+	}
+
+	/* Now handle the instruction fault. */
+
+	if (!(ssw & (FC|FB)))
+		return;
+
+	if (fp->ptregs.sr & PS_S) {
+		printk("Instruction fault at %#010lx\n",
+			fp->ptregs.pc);
+	buserr:
+		printk ("BAD KERNEL BUSERR\n");
+		die_if_kernel("Oops",&fp->ptregs,0);
+		force_sig(SIGKILL, current);
+		return;
+	}
+
+	/* get the fault address */
+	if (fp->ptregs.format == 10)
+		addr = fp->ptregs.pc + 4;
+	else
+		addr = fp->un.fmtb.baddr;
+	if (ssw & FC)
+		addr -= 2;
+
+	if ((ssw & DF) && ((addr ^ fp->un.fmtb.daddr) & PAGE_MASK) == 0)
+		/* Insn fault on same page as data fault.  But we
+		   should still create the ATC entry.  */
+		goto create_atc_entry;
+
+#ifdef DEBUG
+	asm volatile ("ptestr #1,%2@,#7,%0\n\t"
+		      "pmove %%psr,%1@"
+		      : "=a&" (desc)
+		      : "a" (&temp), "a" (addr));
+#else
+	asm volatile ("ptestr #1,%1@,#7\n\t"
+		      "pmove %%psr,%0@"
+		      : : "a" (&temp), "a" (addr));
+#endif
+	mmusr = temp;
+
+#ifdef DEBUG
+	printk ("mmusr is %#x for addr %#lx in task %p\n",
+		mmusr, addr, current);
+	printk ("descriptor address is %#lx, contents %#lx\n",
+		__va(desc), *(unsigned long *)__va(desc));
+#endif
+
+	if (mmusr & MMU_I)
+		do_page_fault (&fp->ptregs, addr, 0);
+	else if (mmusr & (MMU_B|MMU_L|MMU_S)) {
+		printk ("invalid insn access at %#lx from pc %#lx\n",
+			addr, fp->ptregs.pc);
+#ifdef DEBUG
+		printk("Unknown SIGSEGV - 2\n");
+#endif
+		die_if_kernel("Oops",&fp->ptregs,mmusr);
+		force_sig(SIGSEGV, current);
+		return;
+	}
+
+create_atc_entry:
+	/* setup an ATC entry for the access about to be retried */
+	asm volatile ("ploadr #2,%0@" : /* no outputs */
+		      : "a" (addr));
+}
+#endif /* CPU_M68020_OR_M68030 */
+#endif /* !CONFIG_SUN3 */
+
+asmlinkage void buserr_c(struct frame *fp)
+{
+	/* Only set esp0 if coming from user mode */
+	if (user_mode(&fp->ptregs))
+		current->thread.esp0 = (unsigned long) fp;
+
+#ifdef DEBUG
+	printk ("*** Bus Error *** Format is %x\n", fp->ptregs.format);
+#endif
+
+	switch (fp->ptregs.format) {
+#if defined (CONFIG_M68060)
+	case 4:				/* 68060 access error */
+	  access_error060 (fp);
+	  break;
+#endif
+#if defined (CONFIG_M68040)
+	case 0x7:			/* 68040 access error */
+	  access_error040 (fp);
+	  break;
+#endif
+#if defined (CPU_M68020_OR_M68030)
+	case 0xa:
+	case 0xb:
+	  bus_error030 (fp);
+	  break;
+#endif
+	default:
+	  die_if_kernel("bad frame format",&fp->ptregs,0);
+#ifdef DEBUG
+	  printk("Unknown SIGSEGV - 4\n");
+#endif
+	  force_sig(SIGSEGV, current);
+	}
+}
+
+
+static int kstack_depth_to_print = 48;
+
+void show_trace(unsigned long *stack)
+{
+	unsigned long *endstack;
+	unsigned long addr;
+	int i;
+
+	printk("Call Trace:");
+	addr = (unsigned long)stack + THREAD_SIZE - 1;
+	endstack = (unsigned long *)(addr & -THREAD_SIZE);
+	i = 0;
+	while (stack + 1 <= endstack) {
+		addr = *stack++;
+		/*
+		 * If the address is either in the text segment of the
+		 * kernel, or in the region which contains vmalloc'ed
+		 * memory, it *may* be the address of a calling
+		 * routine; if so, print it so that someone tracing
+		 * down the cause of the crash will be able to figure
+		 * out the call path that was taken.
+		 */
+		if (__kernel_text_address(addr)) {
+#ifndef CONFIG_KALLSYMS
+			if (i % 5 == 0)
+				printk("\n       ");
+#endif
+			printk(" [<%08lx>] %pS\n", addr, (void *)addr);
+			i++;
+		}
+	}
+	printk("\n");
+}
+
+void show_registers(struct pt_regs *regs)
+{
+	struct frame *fp = (struct frame *)regs;
+	mm_segment_t old_fs = get_fs();
+	u16 c, *cp;
+	unsigned long addr;
+	int i;
+
+	print_modules();
+	printk("PC: [<%08lx>] %pS\n", regs->pc, (void *)regs->pc);
+	printk("SR: %04x  SP: %p  a2: %08lx\n", regs->sr, regs, regs->a2);
+	printk("d0: %08lx    d1: %08lx    d2: %08lx    d3: %08lx\n",
+	       regs->d0, regs->d1, regs->d2, regs->d3);
+	printk("d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
+	       regs->d4, regs->d5, regs->a0, regs->a1);
+
+	printk("Process %s (pid: %d, task=%p)\n",
+		current->comm, task_pid_nr(current), current);
+	addr = (unsigned long)&fp->un;
+	printk("Frame format=%X ", regs->format);
+	switch (regs->format) {
+	case 0x2:
+		printk("instr addr=%08lx\n", fp->un.fmt2.iaddr);
+		addr += sizeof(fp->un.fmt2);
+		break;
+	case 0x3:
+		printk("eff addr=%08lx\n", fp->un.fmt3.effaddr);
+		addr += sizeof(fp->un.fmt3);
+		break;
+	case 0x4:
+		printk((CPU_IS_060 ? "fault addr=%08lx fslw=%08lx\n"
+			: "eff addr=%08lx pc=%08lx\n"),
+			fp->un.fmt4.effaddr, fp->un.fmt4.pc);
+		addr += sizeof(fp->un.fmt4);
+		break;
+	case 0x7:
+		printk("eff addr=%08lx ssw=%04x faddr=%08lx\n",
+			fp->un.fmt7.effaddr, fp->un.fmt7.ssw, fp->un.fmt7.faddr);
+		printk("wb 1 stat/addr/data: %04x %08lx %08lx\n",
+			fp->un.fmt7.wb1s, fp->un.fmt7.wb1a, fp->un.fmt7.wb1dpd0);
+		printk("wb 2 stat/addr/data: %04x %08lx %08lx\n",
+			fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, fp->un.fmt7.wb2d);
+		printk("wb 3 stat/addr/data: %04x %08lx %08lx\n",
+			fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, fp->un.fmt7.wb3d);
+		printk("push data: %08lx %08lx %08lx %08lx\n",
+			fp->un.fmt7.wb1dpd0, fp->un.fmt7.pd1, fp->un.fmt7.pd2,
+			fp->un.fmt7.pd3);
+		addr += sizeof(fp->un.fmt7);
+		break;
+	case 0x9:
+		printk("instr addr=%08lx\n", fp->un.fmt9.iaddr);
+		addr += sizeof(fp->un.fmt9);
+		break;
+	case 0xa:
+		printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n",
+			fp->un.fmta.ssw, fp->un.fmta.isc, fp->un.fmta.isb,
+			fp->un.fmta.daddr, fp->un.fmta.dobuf);
+		addr += sizeof(fp->un.fmta);
+		break;
+	case 0xb:
+		printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n",
+			fp->un.fmtb.ssw, fp->un.fmtb.isc, fp->un.fmtb.isb,
+			fp->un.fmtb.daddr, fp->un.fmtb.dobuf);
+		printk("baddr=%08lx dibuf=%08lx ver=%x\n",
+			fp->un.fmtb.baddr, fp->un.fmtb.dibuf, fp->un.fmtb.ver);
+		addr += sizeof(fp->un.fmtb);
+		break;
+	default:
+		printk("\n");
+	}
+	show_stack(NULL, (unsigned long *)addr);
+
+	printk("Code:");
+	set_fs(KERNEL_DS);
+	cp = (u16 *)regs->pc;
+	for (i = -8; i < 16; i++) {
+		if (get_user(c, cp + i) && i >= 0) {
+			printk(" Bad PC value.");
+			break;
+		}
+		printk(i ? " %04x" : " <%04x>", c);
+	}
+	set_fs(old_fs);
+	printk ("\n");
+}
+
+void show_stack(struct task_struct *task, unsigned long *stack)
+{
+	unsigned long *p;
+	unsigned long *endstack;
+	int i;
+
+	if (!stack) {
+		if (task)
+			stack = (unsigned long *)task->thread.esp0;
+		else
+			stack = (unsigned long *)&stack;
+	}
+	endstack = (unsigned long *)(((unsigned long)stack + THREAD_SIZE - 1) & -THREAD_SIZE);
+
+	printk("Stack from %08lx:", (unsigned long)stack);
+	p = stack;
+	for (i = 0; i < kstack_depth_to_print; i++) {
+		if (p + 1 > endstack)
+			break;
+		if (i % 8 == 0)
+			printk("\n       ");
+		printk(" %08lx", *p++);
+	}
+	printk("\n");
+	show_trace(stack);
+}
+
+/*
+ * The architecture-independent backtrace generator
+ */
+void dump_stack(void)
+{
+	unsigned long stack;
+
+	show_trace(&stack);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+/*
+ * The vector number returned in the frame pointer may also contain
+ * the "fs" (Fault Status) bits on ColdFire. These are in the bottom
+ * 2 bits, and upper 2 bits. So we need to mask out the real vector
+ * number before using it in comparisons. You don't need to do this on
+ * real 68k parts, but it won't hurt either.
+ */
+
+void bad_super_trap (struct frame *fp)
+{
+	int vector = (fp->ptregs.vector >> 2) & 0xff;
+
+	console_verbose();
+	if (vector < ARRAY_SIZE(vec_names))
+		printk ("*** %s ***   FORMAT=%X\n",
+			vec_names[vector],
+			fp->ptregs.format);
+	else
+		printk ("*** Exception %d ***   FORMAT=%X\n",
+			vector, fp->ptregs.format);
+	if (vector == VEC_ADDRERR && CPU_IS_020_OR_030) {
+		unsigned short ssw = fp->un.fmtb.ssw;
+
+		printk ("SSW=%#06x  ", ssw);
+
+		if (ssw & RC)
+			printk ("Pipe stage C instruction fault at %#010lx\n",
+				(fp->ptregs.format) == 0xA ?
+				fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2);
+		if (ssw & RB)
+			printk ("Pipe stage B instruction fault at %#010lx\n",
+				(fp->ptregs.format) == 0xA ?
+				fp->ptregs.pc + 4 : fp->un.fmtb.baddr);
+		if (ssw & DF)
+			printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
+				ssw & RW ? "read" : "write",
+				fp->un.fmtb.daddr, space_names[ssw & DFC],
+				fp->ptregs.pc);
+	}
+	printk ("Current process id is %d\n", task_pid_nr(current));
+	die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0);
+}
+
+asmlinkage void trap_c(struct frame *fp)
+{
+	int sig;
+	int vector = (fp->ptregs.vector >> 2) & 0xff;
+	siginfo_t info;
+
+	if (fp->ptregs.sr & PS_S) {
+		if (vector == VEC_TRACE) {
+			/* traced a trapping instruction on a 68020/30,
+			 * real exception will be executed afterwards.
+			 */
+		} else if (!handle_kernel_fault(&fp->ptregs))
+			bad_super_trap(fp);
+		return;
+	}
+
+	/* send the appropriate signal to the user program */
+	switch (vector) {
+	    case VEC_ADDRERR:
+		info.si_code = BUS_ADRALN;
+		sig = SIGBUS;
+		break;
+	    case VEC_ILLEGAL:
+	    case VEC_LINE10:
+	    case VEC_LINE11:
+		info.si_code = ILL_ILLOPC;
+		sig = SIGILL;
+		break;
+	    case VEC_PRIV:
+		info.si_code = ILL_PRVOPC;
+		sig = SIGILL;
+		break;
+	    case VEC_COPROC:
+		info.si_code = ILL_COPROC;
+		sig = SIGILL;
+		break;
+	    case VEC_TRAP1:
+	    case VEC_TRAP2:
+	    case VEC_TRAP3:
+	    case VEC_TRAP4:
+	    case VEC_TRAP5:
+	    case VEC_TRAP6:
+	    case VEC_TRAP7:
+	    case VEC_TRAP8:
+	    case VEC_TRAP9:
+	    case VEC_TRAP10:
+	    case VEC_TRAP11:
+	    case VEC_TRAP12:
+	    case VEC_TRAP13:
+	    case VEC_TRAP14:
+		info.si_code = ILL_ILLTRP;
+		sig = SIGILL;
+		break;
+	    case VEC_FPBRUC:
+	    case VEC_FPOE:
+	    case VEC_FPNAN:
+		info.si_code = FPE_FLTINV;
+		sig = SIGFPE;
+		break;
+	    case VEC_FPIR:
+		info.si_code = FPE_FLTRES;
+		sig = SIGFPE;
+		break;
+	    case VEC_FPDIVZ:
+		info.si_code = FPE_FLTDIV;
+		sig = SIGFPE;
+		break;
+	    case VEC_FPUNDER:
+		info.si_code = FPE_FLTUND;
+		sig = SIGFPE;
+		break;
+	    case VEC_FPOVER:
+		info.si_code = FPE_FLTOVF;
+		sig = SIGFPE;
+		break;
+	    case VEC_ZERODIV:
+		info.si_code = FPE_INTDIV;
+		sig = SIGFPE;
+		break;
+	    case VEC_CHK:
+	    case VEC_TRAP:
+		info.si_code = FPE_INTOVF;
+		sig = SIGFPE;
+		break;
+	    case VEC_TRACE:		/* ptrace single step */
+		info.si_code = TRAP_TRACE;
+		sig = SIGTRAP;
+		break;
+	    case VEC_TRAP15:		/* breakpoint */
+		info.si_code = TRAP_BRKPT;
+		sig = SIGTRAP;
+		break;
+	    default:
+		info.si_code = ILL_ILLOPC;
+		sig = SIGILL;
+		break;
+	}
+	info.si_signo = sig;
+	info.si_errno = 0;
+	switch (fp->ptregs.format) {
+	    default:
+		info.si_addr = (void *) fp->ptregs.pc;
+		break;
+	    case 2:
+		info.si_addr = (void *) fp->un.fmt2.iaddr;
+		break;
+	    case 7:
+		info.si_addr = (void *) fp->un.fmt7.effaddr;
+		break;
+	    case 9:
+		info.si_addr = (void *) fp->un.fmt9.iaddr;
+		break;
+	    case 10:
+		info.si_addr = (void *) fp->un.fmta.daddr;
+		break;
+	    case 11:
+		info.si_addr = (void *) fp->un.fmtb.daddr;
+		break;
+	}
+	force_sig_info (sig, &info, current);
+}
+
+void die_if_kernel (char *str, struct pt_regs *fp, int nr)
+{
+	if (!(fp->sr & PS_S))
+		return;
+
+	console_verbose();
+	printk("%s: %08x\n",str,nr);
+	show_registers(fp);
+	add_taint(TAINT_DIE);
+	do_exit(SIGSEGV);
+}
+
+asmlinkage void set_esp0(unsigned long ssp)
+{
+	current->thread.esp0 = ssp;
+}
+
+/*
+ * This function is called if an error occur while accessing
+ * user-space from the fpsp040 code.
+ */
+asmlinkage void fpsp040_die(void)
+{
+	do_exit(SIGSEGV);
+}
+
+#ifdef CONFIG_M68KFPU_EMU
+asmlinkage void fpemu_signal(int signal, int code, void *addr)
+{
+	siginfo_t info;
+
+	info.si_signo = signal;
+	info.si_errno = 0;
+	info.si_code = code;
+	info.si_addr = addr;
+	force_sig_info(signal, &info, current);
+}
 #endif
diff --git a/arch/m68k/kernel/traps_mm.c b/arch/m68k/kernel/traps_mm.c
deleted file mode 100644
index 4022bbc2887823..00000000000000
--- a/arch/m68k/kernel/traps_mm.c
+++ /dev/null
@@ -1,1207 +0,0 @@
-/*
- *  linux/arch/m68k/kernel/traps.c
- *
- *  Copyright (C) 1993, 1994 by Hamish Macdonald
- *
- *  68040 fixes by Michael Rausch
- *  68040 fixes by Martin Apel
- *  68040 fixes and writeback by Richard Zidlicky
- *  68060 fixes by Roman Hodek
- *  68060 fixes by Jesper Skov
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Sets up all exception vectors
- */
-
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/user.h>
-#include <linux/string.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/kallsyms.h>
-
-#include <asm/setup.h>
-#include <asm/fpu.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/traps.h>
-#include <asm/pgalloc.h>
-#include <asm/machdep.h>
-#include <asm/siginfo.h>
-
-/* assembler routines */
-asmlinkage void system_call(void);
-asmlinkage void buserr(void);
-asmlinkage void trap(void);
-asmlinkage void nmihandler(void);
-#ifdef CONFIG_M68KFPU_EMU
-asmlinkage void fpu_emu(void);
-#endif
-
-e_vector vectors[256];
-
-/* nmi handler for the Amiga */
-asm(".text\n"
-    __ALIGN_STR "\n"
-    "nmihandler: rte");
-
-/*
- * this must be called very early as the kernel might
- * use some instruction that are emulated on the 060
- * and so we're prepared for early probe attempts (e.g. nf_init).
- */
-void __init base_trap_init(void)
-{
-	if (MACH_IS_SUN3X) {
-		extern e_vector *sun3x_prom_vbr;
-
-		__asm__ volatile ("movec %%vbr, %0" : "=r" (sun3x_prom_vbr));
-	}
-
-	/* setup the exception vector table */
-	__asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)vectors));
-
-	if (CPU_IS_060) {
-		/* set up ISP entry points */
-		asmlinkage void unimp_vec(void) asm ("_060_isp_unimp");
-
-		vectors[VEC_UNIMPII] = unimp_vec;
-	}
-
-	vectors[VEC_BUSERR] = buserr;
-	vectors[VEC_ILLEGAL] = trap;
-	vectors[VEC_SYS] = system_call;
-}
-
-void __init trap_init (void)
-{
-	int i;
-
-	for (i = VEC_SPUR; i <= VEC_INT7; i++)
-		vectors[i] = bad_inthandler;
-
-	for (i = 0; i < VEC_USER; i++)
-		if (!vectors[i])
-			vectors[i] = trap;
-
-	for (i = VEC_USER; i < 256; i++)
-		vectors[i] = bad_inthandler;
-
-#ifdef CONFIG_M68KFPU_EMU
-	if (FPU_IS_EMU)
-		vectors[VEC_LINE11] = fpu_emu;
-#endif
-
-	if (CPU_IS_040 && !FPU_IS_EMU) {
-		/* set up FPSP entry points */
-		asmlinkage void dz_vec(void) asm ("dz");
-		asmlinkage void inex_vec(void) asm ("inex");
-		asmlinkage void ovfl_vec(void) asm ("ovfl");
-		asmlinkage void unfl_vec(void) asm ("unfl");
-		asmlinkage void snan_vec(void) asm ("snan");
-		asmlinkage void operr_vec(void) asm ("operr");
-		asmlinkage void bsun_vec(void) asm ("bsun");
-		asmlinkage void fline_vec(void) asm ("fline");
-		asmlinkage void unsupp_vec(void) asm ("unsupp");
-
-		vectors[VEC_FPDIVZ] = dz_vec;
-		vectors[VEC_FPIR] = inex_vec;
-		vectors[VEC_FPOVER] = ovfl_vec;
-		vectors[VEC_FPUNDER] = unfl_vec;
-		vectors[VEC_FPNAN] = snan_vec;
-		vectors[VEC_FPOE] = operr_vec;
-		vectors[VEC_FPBRUC] = bsun_vec;
-		vectors[VEC_LINE11] = fline_vec;
-		vectors[VEC_FPUNSUP] = unsupp_vec;
-	}
-
-	if (CPU_IS_060 && !FPU_IS_EMU) {
-		/* set up IFPSP entry points */
-		asmlinkage void snan_vec6(void) asm ("_060_fpsp_snan");
-		asmlinkage void operr_vec6(void) asm ("_060_fpsp_operr");
-		asmlinkage void ovfl_vec6(void) asm ("_060_fpsp_ovfl");
-		asmlinkage void unfl_vec6(void) asm ("_060_fpsp_unfl");
-		asmlinkage void dz_vec6(void) asm ("_060_fpsp_dz");
-		asmlinkage void inex_vec6(void) asm ("_060_fpsp_inex");
-		asmlinkage void fline_vec6(void) asm ("_060_fpsp_fline");
-		asmlinkage void unsupp_vec6(void) asm ("_060_fpsp_unsupp");
-		asmlinkage void effadd_vec6(void) asm ("_060_fpsp_effadd");
-
-		vectors[VEC_FPNAN] = snan_vec6;
-		vectors[VEC_FPOE] = operr_vec6;
-		vectors[VEC_FPOVER] = ovfl_vec6;
-		vectors[VEC_FPUNDER] = unfl_vec6;
-		vectors[VEC_FPDIVZ] = dz_vec6;
-		vectors[VEC_FPIR] = inex_vec6;
-		vectors[VEC_LINE11] = fline_vec6;
-		vectors[VEC_FPUNSUP] = unsupp_vec6;
-		vectors[VEC_UNIMPEA] = effadd_vec6;
-	}
-
-        /* if running on an amiga, make the NMI interrupt do nothing */
-	if (MACH_IS_AMIGA) {
-		vectors[VEC_INT7] = nmihandler;
-	}
-}
-
-
-static const char *vec_names[] = {
-	[VEC_RESETSP]	= "RESET SP",
-	[VEC_RESETPC]	= "RESET PC",
-	[VEC_BUSERR]	= "BUS ERROR",
-	[VEC_ADDRERR]	= "ADDRESS ERROR",
-	[VEC_ILLEGAL]	= "ILLEGAL INSTRUCTION",
-	[VEC_ZERODIV]	= "ZERO DIVIDE",
-	[VEC_CHK]	= "CHK",
-	[VEC_TRAP]	= "TRAPcc",
-	[VEC_PRIV]	= "PRIVILEGE VIOLATION",
-	[VEC_TRACE]	= "TRACE",
-	[VEC_LINE10]	= "LINE 1010",
-	[VEC_LINE11]	= "LINE 1111",
-	[VEC_RESV12]	= "UNASSIGNED RESERVED 12",
-	[VEC_COPROC]	= "COPROCESSOR PROTOCOL VIOLATION",
-	[VEC_FORMAT]	= "FORMAT ERROR",
-	[VEC_UNINT]	= "UNINITIALIZED INTERRUPT",
-	[VEC_RESV16]	= "UNASSIGNED RESERVED 16",
-	[VEC_RESV17]	= "UNASSIGNED RESERVED 17",
-	[VEC_RESV18]	= "UNASSIGNED RESERVED 18",
-	[VEC_RESV19]	= "UNASSIGNED RESERVED 19",
-	[VEC_RESV20]	= "UNASSIGNED RESERVED 20",
-	[VEC_RESV21]	= "UNASSIGNED RESERVED 21",
-	[VEC_RESV22]	= "UNASSIGNED RESERVED 22",
-	[VEC_RESV23]	= "UNASSIGNED RESERVED 23",
-	[VEC_SPUR]	= "SPURIOUS INTERRUPT",
-	[VEC_INT1]	= "LEVEL 1 INT",
-	[VEC_INT2]	= "LEVEL 2 INT",
-	[VEC_INT3]	= "LEVEL 3 INT",
-	[VEC_INT4]	= "LEVEL 4 INT",
-	[VEC_INT5]	= "LEVEL 5 INT",
-	[VEC_INT6]	= "LEVEL 6 INT",
-	[VEC_INT7]	= "LEVEL 7 INT",
-	[VEC_SYS]	= "SYSCALL",
-	[VEC_TRAP1]	= "TRAP #1",
-	[VEC_TRAP2]	= "TRAP #2",
-	[VEC_TRAP3]	= "TRAP #3",
-	[VEC_TRAP4]	= "TRAP #4",
-	[VEC_TRAP5]	= "TRAP #5",
-	[VEC_TRAP6]	= "TRAP #6",
-	[VEC_TRAP7]	= "TRAP #7",
-	[VEC_TRAP8]	= "TRAP #8",
-	[VEC_TRAP9]	= "TRAP #9",
-	[VEC_TRAP10]	= "TRAP #10",
-	[VEC_TRAP11]	= "TRAP #11",
-	[VEC_TRAP12]	= "TRAP #12",
-	[VEC_TRAP13]	= "TRAP #13",
-	[VEC_TRAP14]	= "TRAP #14",
-	[VEC_TRAP15]	= "TRAP #15",
-	[VEC_FPBRUC]	= "FPCP BSUN",
-	[VEC_FPIR]	= "FPCP INEXACT",
-	[VEC_FPDIVZ]	= "FPCP DIV BY 0",
-	[VEC_FPUNDER]	= "FPCP UNDERFLOW",
-	[VEC_FPOE]	= "FPCP OPERAND ERROR",
-	[VEC_FPOVER]	= "FPCP OVERFLOW",
-	[VEC_FPNAN]	= "FPCP SNAN",
-	[VEC_FPUNSUP]	= "FPCP UNSUPPORTED OPERATION",
-	[VEC_MMUCFG]	= "MMU CONFIGURATION ERROR",
-	[VEC_MMUILL]	= "MMU ILLEGAL OPERATION ERROR",
-	[VEC_MMUACC]	= "MMU ACCESS LEVEL VIOLATION ERROR",
-	[VEC_RESV59]	= "UNASSIGNED RESERVED 59",
-	[VEC_UNIMPEA]	= "UNASSIGNED RESERVED 60",
-	[VEC_UNIMPII]	= "UNASSIGNED RESERVED 61",
-	[VEC_RESV62]	= "UNASSIGNED RESERVED 62",
-	[VEC_RESV63]	= "UNASSIGNED RESERVED 63",
-};
-
-static const char *space_names[] = {
-	[0]		= "Space 0",
-	[USER_DATA]	= "User Data",
-	[USER_PROGRAM]	= "User Program",
-#ifndef CONFIG_SUN3
-	[3]		= "Space 3",
-#else
-	[FC_CONTROL]	= "Control",
-#endif
-	[4]		= "Space 4",
-	[SUPER_DATA]	= "Super Data",
-	[SUPER_PROGRAM]	= "Super Program",
-	[CPU_SPACE]	= "CPU"
-};
-
-void die_if_kernel(char *,struct pt_regs *,int);
-asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
-                             unsigned long error_code);
-int send_fault_sig(struct pt_regs *regs);
-
-asmlinkage void trap_c(struct frame *fp);
-
-#if defined (CONFIG_M68060)
-static inline void access_error060 (struct frame *fp)
-{
-	unsigned long fslw = fp->un.fmt4.pc; /* is really FSLW for access error */
-
-#ifdef DEBUG
-	printk("fslw=%#lx, fa=%#lx\n", fslw, fp->un.fmt4.effaddr);
-#endif
-
-	if (fslw & MMU060_BPE) {
-		/* branch prediction error -> clear branch cache */
-		__asm__ __volatile__ ("movec %/cacr,%/d0\n\t"
-				      "orl   #0x00400000,%/d0\n\t"
-				      "movec %/d0,%/cacr"
-				      : : : "d0" );
-		/* return if there's no other error */
-		if (!(fslw & MMU060_ERR_BITS) && !(fslw & MMU060_SEE))
-			return;
-	}
-
-	if (fslw & (MMU060_DESC_ERR | MMU060_WP | MMU060_SP)) {
-		unsigned long errorcode;
-		unsigned long addr = fp->un.fmt4.effaddr;
-
-		if (fslw & MMU060_MA)
-			addr = (addr + PAGE_SIZE - 1) & PAGE_MASK;
-
-		errorcode = 1;
-		if (fslw & MMU060_DESC_ERR) {
-			__flush_tlb040_one(addr);
-			errorcode = 0;
-		}
-		if (fslw & MMU060_W)
-			errorcode |= 2;
-#ifdef DEBUG
-		printk("errorcode = %d\n", errorcode );
-#endif
-		do_page_fault(&fp->ptregs, addr, errorcode);
-	} else if (fslw & (MMU060_SEE)){
-		/* Software Emulation Error.
-		 * fault during mem_read/mem_write in ifpsp060/os.S
-		 */
-		send_fault_sig(&fp->ptregs);
-	} else if (!(fslw & (MMU060_RE|MMU060_WE)) ||
-		   send_fault_sig(&fp->ptregs) > 0) {
-		printk("pc=%#lx, fa=%#lx\n", fp->ptregs.pc, fp->un.fmt4.effaddr);
-		printk( "68060 access error, fslw=%lx\n", fslw );
-		trap_c( fp );
-	}
-}
-#endif /* CONFIG_M68060 */
-
-#if defined (CONFIG_M68040)
-static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs)
-{
-	unsigned long mmusr;
-	mm_segment_t old_fs = get_fs();
-
-	set_fs(MAKE_MM_SEG(wbs));
-
-	if (iswrite)
-		asm volatile (".chip 68040; ptestw (%0); .chip 68k" : : "a" (addr));
-	else
-		asm volatile (".chip 68040; ptestr (%0); .chip 68k" : : "a" (addr));
-
-	asm volatile (".chip 68040; movec %%mmusr,%0; .chip 68k" : "=r" (mmusr));
-
-	set_fs(old_fs);
-
-	return mmusr;
-}
-
-static inline int do_040writeback1(unsigned short wbs, unsigned long wba,
-				   unsigned long wbd)
-{
-	int res = 0;
-	mm_segment_t old_fs = get_fs();
-
-	/* set_fs can not be moved, otherwise put_user() may oops */
-	set_fs(MAKE_MM_SEG(wbs));
-
-	switch (wbs & WBSIZ_040) {
-	case BA_SIZE_BYTE:
-		res = put_user(wbd & 0xff, (char __user *)wba);
-		break;
-	case BA_SIZE_WORD:
-		res = put_user(wbd & 0xffff, (short __user *)wba);
-		break;
-	case BA_SIZE_LONG:
-		res = put_user(wbd, (int __user *)wba);
-		break;
-	}
-
-	/* set_fs can not be moved, otherwise put_user() may oops */
-	set_fs(old_fs);
-
-
-#ifdef DEBUG
-	printk("do_040writeback1, res=%d\n",res);
-#endif
-
-	return res;
-}
-
-/* after an exception in a writeback the stack frame corresponding
- * to that exception is discarded, set a few bits in the old frame
- * to simulate what it should look like
- */
-static inline void fix_xframe040(struct frame *fp, unsigned long wba, unsigned short wbs)
-{
-	fp->un.fmt7.faddr = wba;
-	fp->un.fmt7.ssw = wbs & 0xff;
-	if (wba != current->thread.faddr)
-	    fp->un.fmt7.ssw |= MA_040;
-}
-
-static inline void do_040writebacks(struct frame *fp)
-{
-	int res = 0;
-#if 0
-	if (fp->un.fmt7.wb1s & WBV_040)
-		printk("access_error040: cannot handle 1st writeback. oops.\n");
-#endif
-
-	if ((fp->un.fmt7.wb2s & WBV_040) &&
-	    !(fp->un.fmt7.wb2s & WBTT_040)) {
-		res = do_040writeback1(fp->un.fmt7.wb2s, fp->un.fmt7.wb2a,
-				       fp->un.fmt7.wb2d);
-		if (res)
-			fix_xframe040(fp, fp->un.fmt7.wb2a, fp->un.fmt7.wb2s);
-		else
-			fp->un.fmt7.wb2s = 0;
-	}
-
-	/* do the 2nd wb only if the first one was successful (except for a kernel wb) */
-	if (fp->un.fmt7.wb3s & WBV_040 && (!res || fp->un.fmt7.wb3s & 4)) {
-		res = do_040writeback1(fp->un.fmt7.wb3s, fp->un.fmt7.wb3a,
-				       fp->un.fmt7.wb3d);
-		if (res)
-		    {
-			fix_xframe040(fp, fp->un.fmt7.wb3a, fp->un.fmt7.wb3s);
-
-			fp->un.fmt7.wb2s = fp->un.fmt7.wb3s;
-			fp->un.fmt7.wb3s &= (~WBV_040);
-			fp->un.fmt7.wb2a = fp->un.fmt7.wb3a;
-			fp->un.fmt7.wb2d = fp->un.fmt7.wb3d;
-		    }
-		else
-			fp->un.fmt7.wb3s = 0;
-	}
-
-	if (res)
-		send_fault_sig(&fp->ptregs);
-}
-
-/*
- * called from sigreturn(), must ensure userspace code didn't
- * manipulate exception frame to circumvent protection, then complete
- * pending writebacks
- * we just clear TM2 to turn it into a userspace access
- */
-asmlinkage void berr_040cleanup(struct frame *fp)
-{
-	fp->un.fmt7.wb2s &= ~4;
-	fp->un.fmt7.wb3s &= ~4;
-
-	do_040writebacks(fp);
-}
-
-static inline void access_error040(struct frame *fp)
-{
-	unsigned short ssw = fp->un.fmt7.ssw;
-	unsigned long mmusr;
-
-#ifdef DEBUG
-	printk("ssw=%#x, fa=%#lx\n", ssw, fp->un.fmt7.faddr);
-        printk("wb1s=%#x, wb2s=%#x, wb3s=%#x\n", fp->un.fmt7.wb1s,
-		fp->un.fmt7.wb2s, fp->un.fmt7.wb3s);
-	printk ("wb2a=%lx, wb3a=%lx, wb2d=%lx, wb3d=%lx\n",
-		fp->un.fmt7.wb2a, fp->un.fmt7.wb3a,
-		fp->un.fmt7.wb2d, fp->un.fmt7.wb3d);
-#endif
-
-	if (ssw & ATC_040) {
-		unsigned long addr = fp->un.fmt7.faddr;
-		unsigned long errorcode;
-
-		/*
-		 * The MMU status has to be determined AFTER the address
-		 * has been corrected if there was a misaligned access (MA).
-		 */
-		if (ssw & MA_040)
-			addr = (addr + 7) & -8;
-
-		/* MMU error, get the MMUSR info for this access */
-		mmusr = probe040(!(ssw & RW_040), addr, ssw);
-#ifdef DEBUG
-		printk("mmusr = %lx\n", mmusr);
-#endif
-		errorcode = 1;
-		if (!(mmusr & MMU_R_040)) {
-			/* clear the invalid atc entry */
-			__flush_tlb040_one(addr);
-			errorcode = 0;
-		}
-
-		/* despite what documentation seems to say, RMW
-		 * accesses have always both the LK and RW bits set */
-		if (!(ssw & RW_040) || (ssw & LK_040))
-			errorcode |= 2;
-
-		if (do_page_fault(&fp->ptregs, addr, errorcode)) {
-#ifdef DEBUG
-			printk("do_page_fault() !=0\n");
-#endif
-			if (user_mode(&fp->ptregs)){
-				/* delay writebacks after signal delivery */
-#ifdef DEBUG
-			        printk(".. was usermode - return\n");
-#endif
-				return;
-			}
-			/* disable writeback into user space from kernel
-			 * (if do_page_fault didn't fix the mapping,
-                         * the writeback won't do good)
-			 */
-disable_wb:
-#ifdef DEBUG
-			printk(".. disabling wb2\n");
-#endif
-			if (fp->un.fmt7.wb2a == fp->un.fmt7.faddr)
-				fp->un.fmt7.wb2s &= ~WBV_040;
-			if (fp->un.fmt7.wb3a == fp->un.fmt7.faddr)
-				fp->un.fmt7.wb3s &= ~WBV_040;
-		}
-	} else {
-		/* In case of a bus error we either kill the process or expect
-		 * the kernel to catch the fault, which then is also responsible
-		 * for cleaning up the mess.
-		 */
-		current->thread.signo = SIGBUS;
-		current->thread.faddr = fp->un.fmt7.faddr;
-		if (send_fault_sig(&fp->ptregs) >= 0)
-			printk("68040 bus error (ssw=%x, faddr=%lx)\n", ssw,
-			       fp->un.fmt7.faddr);
-		goto disable_wb;
-	}
-
-	do_040writebacks(fp);
-}
-#endif /* CONFIG_M68040 */
-
-#if defined(CONFIG_SUN3)
-#include <asm/sun3mmu.h>
-
-extern int mmu_emu_handle_fault (unsigned long, int, int);
-
-/* sun3 version of bus_error030 */
-
-static inline void bus_error030 (struct frame *fp)
-{
-	unsigned char buserr_type = sun3_get_buserr ();
-	unsigned long addr, errorcode;
-	unsigned short ssw = fp->un.fmtb.ssw;
-	extern unsigned long _sun3_map_test_start, _sun3_map_test_end;
-
-#ifdef DEBUG
-	if (ssw & (FC | FB))
-		printk ("Instruction fault at %#010lx\n",
-			ssw & FC ?
-			fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2
-			:
-			fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr);
-	if (ssw & DF)
-		printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
-			ssw & RW ? "read" : "write",
-			fp->un.fmtb.daddr,
-			space_names[ssw & DFC], fp->ptregs.pc);
-#endif
-
-	/*
-	 * Check if this page should be demand-mapped. This needs to go before
-	 * the testing for a bad kernel-space access (demand-mapping applies
-	 * to kernel accesses too).
-	 */
-
-	if ((ssw & DF)
-	    && (buserr_type & (SUN3_BUSERR_PROTERR | SUN3_BUSERR_INVALID))) {
-		if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 0))
-			return;
-	}
-
-	/* Check for kernel-space pagefault (BAD). */
-	if (fp->ptregs.sr & PS_S) {
-		/* kernel fault must be a data fault to user space */
-		if (! ((ssw & DF) && ((ssw & DFC) == USER_DATA))) {
-		     // try checking the kernel mappings before surrender
-		     if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 1))
-			  return;
-			/* instruction fault or kernel data fault! */
-			if (ssw & (FC | FB))
-				printk ("Instruction fault at %#010lx\n",
-					fp->ptregs.pc);
-			if (ssw & DF) {
-				/* was this fault incurred testing bus mappings? */
-				if((fp->ptregs.pc >= (unsigned long)&_sun3_map_test_start) &&
-				   (fp->ptregs.pc <= (unsigned long)&_sun3_map_test_end)) {
-					send_fault_sig(&fp->ptregs);
-					return;
-				}
-
-				printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
-					ssw & RW ? "read" : "write",
-					fp->un.fmtb.daddr,
-					space_names[ssw & DFC], fp->ptregs.pc);
-			}
-			printk ("BAD KERNEL BUSERR\n");
-
-			die_if_kernel("Oops", &fp->ptregs,0);
-			force_sig(SIGKILL, current);
-			return;
-		}
-	} else {
-		/* user fault */
-		if (!(ssw & (FC | FB)) && !(ssw & DF))
-			/* not an instruction fault or data fault! BAD */
-			panic ("USER BUSERR w/o instruction or data fault");
-	}
-
-
-	/* First handle the data fault, if any.  */
-	if (ssw & DF) {
-		addr = fp->un.fmtb.daddr;
-
-// errorcode bit 0:	0 -> no page		1 -> protection fault
-// errorcode bit 1:	0 -> read fault		1 -> write fault
-
-// (buserr_type & SUN3_BUSERR_PROTERR)	-> protection fault
-// (buserr_type & SUN3_BUSERR_INVALID)	-> invalid page fault
-
-		if (buserr_type & SUN3_BUSERR_PROTERR)
-			errorcode = 0x01;
-		else if (buserr_type & SUN3_BUSERR_INVALID)
-			errorcode = 0x00;
-		else {
-#ifdef DEBUG
-			printk ("*** unexpected busfault type=%#04x\n", buserr_type);
-			printk ("invalid %s access at %#lx from pc %#lx\n",
-				!(ssw & RW) ? "write" : "read", addr,
-				fp->ptregs.pc);
-#endif
-			die_if_kernel ("Oops", &fp->ptregs, buserr_type);
-			force_sig (SIGBUS, current);
-			return;
-		}
-
-//todo: wtf is RM bit? --m
-		if (!(ssw & RW) || ssw & RM)
-			errorcode |= 0x02;
-
-		/* Handle page fault. */
-		do_page_fault (&fp->ptregs, addr, errorcode);
-
-		/* Retry the data fault now. */
-		return;
-	}
-
-	/* Now handle the instruction fault. */
-
-	/* Get the fault address. */
-	if (fp->ptregs.format == 0xA)
-		addr = fp->ptregs.pc + 4;
-	else
-		addr = fp->un.fmtb.baddr;
-	if (ssw & FC)
-		addr -= 2;
-
-	if (buserr_type & SUN3_BUSERR_INVALID) {
-		if (!mmu_emu_handle_fault (fp->un.fmtb.daddr, 1, 0))
-			do_page_fault (&fp->ptregs, addr, 0);
-       } else {
-#ifdef DEBUG
-		printk ("protection fault on insn access (segv).\n");
-#endif
-		force_sig (SIGSEGV, current);
-       }
-}
-#else
-#if defined(CPU_M68020_OR_M68030)
-static inline void bus_error030 (struct frame *fp)
-{
-	volatile unsigned short temp;
-	unsigned short mmusr;
-	unsigned long addr, errorcode;
-	unsigned short ssw = fp->un.fmtb.ssw;
-#ifdef DEBUG
-	unsigned long desc;
-
-	printk ("pid = %x  ", current->pid);
-	printk ("SSW=%#06x  ", ssw);
-
-	if (ssw & (FC | FB))
-		printk ("Instruction fault at %#010lx\n",
-			ssw & FC ?
-			fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2
-			:
-			fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr);
-	if (ssw & DF)
-		printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
-			ssw & RW ? "read" : "write",
-			fp->un.fmtb.daddr,
-			space_names[ssw & DFC], fp->ptregs.pc);
-#endif
-
-	/* ++andreas: If a data fault and an instruction fault happen
-	   at the same time map in both pages.  */
-
-	/* First handle the data fault, if any.  */
-	if (ssw & DF) {
-		addr = fp->un.fmtb.daddr;
-
-#ifdef DEBUG
-		asm volatile ("ptestr %3,%2@,#7,%0\n\t"
-			      "pmove %%psr,%1@"
-			      : "=a&" (desc)
-			      : "a" (&temp), "a" (addr), "d" (ssw));
-#else
-		asm volatile ("ptestr %2,%1@,#7\n\t"
-			      "pmove %%psr,%0@"
-			      : : "a" (&temp), "a" (addr), "d" (ssw));
-#endif
-		mmusr = temp;
-
-#ifdef DEBUG
-		printk("mmusr is %#x for addr %#lx in task %p\n",
-		       mmusr, addr, current);
-		printk("descriptor address is %#lx, contents %#lx\n",
-		       __va(desc), *(unsigned long *)__va(desc));
-#endif
-
-		errorcode = (mmusr & MMU_I) ? 0 : 1;
-		if (!(ssw & RW) || (ssw & RM))
-			errorcode |= 2;
-
-		if (mmusr & (MMU_I | MMU_WP)) {
-			if (ssw & 4) {
-				printk("Data %s fault at %#010lx in %s (pc=%#lx)\n",
-				       ssw & RW ? "read" : "write",
-				       fp->un.fmtb.daddr,
-				       space_names[ssw & DFC], fp->ptregs.pc);
-				goto buserr;
-			}
-			/* Don't try to do anything further if an exception was
-			   handled. */
-			if (do_page_fault (&fp->ptregs, addr, errorcode) < 0)
-				return;
-		} else if (!(mmusr & MMU_I)) {
-			/* probably a 020 cas fault */
-			if (!(ssw & RM) && send_fault_sig(&fp->ptregs) > 0)
-				printk("unexpected bus error (%#x,%#x)\n", ssw, mmusr);
-		} else if (mmusr & (MMU_B|MMU_L|MMU_S)) {
-			printk("invalid %s access at %#lx from pc %#lx\n",
-			       !(ssw & RW) ? "write" : "read", addr,
-			       fp->ptregs.pc);
-			die_if_kernel("Oops",&fp->ptregs,mmusr);
-			force_sig(SIGSEGV, current);
-			return;
-		} else {
-#if 0
-			static volatile long tlong;
-#endif
-
-			printk("weird %s access at %#lx from pc %#lx (ssw is %#x)\n",
-			       !(ssw & RW) ? "write" : "read", addr,
-			       fp->ptregs.pc, ssw);
-			asm volatile ("ptestr #1,%1@,#0\n\t"
-				      "pmove %%psr,%0@"
-				      : /* no outputs */
-				      : "a" (&temp), "a" (addr));
-			mmusr = temp;
-
-			printk ("level 0 mmusr is %#x\n", mmusr);
-#if 0
-			asm volatile ("pmove %%tt0,%0@"
-				      : /* no outputs */
-				      : "a" (&tlong));
-			printk("tt0 is %#lx, ", tlong);
-			asm volatile ("pmove %%tt1,%0@"
-				      : /* no outputs */
-				      : "a" (&tlong));
-			printk("tt1 is %#lx\n", tlong);
-#endif
-#ifdef DEBUG
-			printk("Unknown SIGSEGV - 1\n");
-#endif
-			die_if_kernel("Oops",&fp->ptregs,mmusr);
-			force_sig(SIGSEGV, current);
-			return;
-		}
-
-		/* setup an ATC entry for the access about to be retried */
-		if (!(ssw & RW) || (ssw & RM))
-			asm volatile ("ploadw %1,%0@" : /* no outputs */
-				      : "a" (addr), "d" (ssw));
-		else
-			asm volatile ("ploadr %1,%0@" : /* no outputs */
-				      : "a" (addr), "d" (ssw));
-	}
-
-	/* Now handle the instruction fault. */
-
-	if (!(ssw & (FC|FB)))
-		return;
-
-	if (fp->ptregs.sr & PS_S) {
-		printk("Instruction fault at %#010lx\n",
-			fp->ptregs.pc);
-	buserr:
-		printk ("BAD KERNEL BUSERR\n");
-		die_if_kernel("Oops",&fp->ptregs,0);
-		force_sig(SIGKILL, current);
-		return;
-	}
-
-	/* get the fault address */
-	if (fp->ptregs.format == 10)
-		addr = fp->ptregs.pc + 4;
-	else
-		addr = fp->un.fmtb.baddr;
-	if (ssw & FC)
-		addr -= 2;
-
-	if ((ssw & DF) && ((addr ^ fp->un.fmtb.daddr) & PAGE_MASK) == 0)
-		/* Insn fault on same page as data fault.  But we
-		   should still create the ATC entry.  */
-		goto create_atc_entry;
-
-#ifdef DEBUG
-	asm volatile ("ptestr #1,%2@,#7,%0\n\t"
-		      "pmove %%psr,%1@"
-		      : "=a&" (desc)
-		      : "a" (&temp), "a" (addr));
-#else
-	asm volatile ("ptestr #1,%1@,#7\n\t"
-		      "pmove %%psr,%0@"
-		      : : "a" (&temp), "a" (addr));
-#endif
-	mmusr = temp;
-
-#ifdef DEBUG
-	printk ("mmusr is %#x for addr %#lx in task %p\n",
-		mmusr, addr, current);
-	printk ("descriptor address is %#lx, contents %#lx\n",
-		__va(desc), *(unsigned long *)__va(desc));
-#endif
-
-	if (mmusr & MMU_I)
-		do_page_fault (&fp->ptregs, addr, 0);
-	else if (mmusr & (MMU_B|MMU_L|MMU_S)) {
-		printk ("invalid insn access at %#lx from pc %#lx\n",
-			addr, fp->ptregs.pc);
-#ifdef DEBUG
-		printk("Unknown SIGSEGV - 2\n");
-#endif
-		die_if_kernel("Oops",&fp->ptregs,mmusr);
-		force_sig(SIGSEGV, current);
-		return;
-	}
-
-create_atc_entry:
-	/* setup an ATC entry for the access about to be retried */
-	asm volatile ("ploadr #2,%0@" : /* no outputs */
-		      : "a" (addr));
-}
-#endif /* CPU_M68020_OR_M68030 */
-#endif /* !CONFIG_SUN3 */
-
-asmlinkage void buserr_c(struct frame *fp)
-{
-	/* Only set esp0 if coming from user mode */
-	if (user_mode(&fp->ptregs))
-		current->thread.esp0 = (unsigned long) fp;
-
-#ifdef DEBUG
-	printk ("*** Bus Error *** Format is %x\n", fp->ptregs.format);
-#endif
-
-	switch (fp->ptregs.format) {
-#if defined (CONFIG_M68060)
-	case 4:				/* 68060 access error */
-	  access_error060 (fp);
-	  break;
-#endif
-#if defined (CONFIG_M68040)
-	case 0x7:			/* 68040 access error */
-	  access_error040 (fp);
-	  break;
-#endif
-#if defined (CPU_M68020_OR_M68030)
-	case 0xa:
-	case 0xb:
-	  bus_error030 (fp);
-	  break;
-#endif
-	default:
-	  die_if_kernel("bad frame format",&fp->ptregs,0);
-#ifdef DEBUG
-	  printk("Unknown SIGSEGV - 4\n");
-#endif
-	  force_sig(SIGSEGV, current);
-	}
-}
-
-
-static int kstack_depth_to_print = 48;
-
-void show_trace(unsigned long *stack)
-{
-	unsigned long *endstack;
-	unsigned long addr;
-	int i;
-
-	printk("Call Trace:");
-	addr = (unsigned long)stack + THREAD_SIZE - 1;
-	endstack = (unsigned long *)(addr & -THREAD_SIZE);
-	i = 0;
-	while (stack + 1 <= endstack) {
-		addr = *stack++;
-		/*
-		 * If the address is either in the text segment of the
-		 * kernel, or in the region which contains vmalloc'ed
-		 * memory, it *may* be the address of a calling
-		 * routine; if so, print it so that someone tracing
-		 * down the cause of the crash will be able to figure
-		 * out the call path that was taken.
-		 */
-		if (__kernel_text_address(addr)) {
-#ifndef CONFIG_KALLSYMS
-			if (i % 5 == 0)
-				printk("\n       ");
-#endif
-			printk(" [<%08lx>] %pS\n", addr, (void *)addr);
-			i++;
-		}
-	}
-	printk("\n");
-}
-
-void show_registers(struct pt_regs *regs)
-{
-	struct frame *fp = (struct frame *)regs;
-	mm_segment_t old_fs = get_fs();
-	u16 c, *cp;
-	unsigned long addr;
-	int i;
-
-	print_modules();
-	printk("PC: [<%08lx>] %pS\n", regs->pc, (void *)regs->pc);
-	printk("SR: %04x  SP: %p  a2: %08lx\n", regs->sr, regs, regs->a2);
-	printk("d0: %08lx    d1: %08lx    d2: %08lx    d3: %08lx\n",
-	       regs->d0, regs->d1, regs->d2, regs->d3);
-	printk("d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
-	       regs->d4, regs->d5, regs->a0, regs->a1);
-
-	printk("Process %s (pid: %d, task=%p)\n",
-		current->comm, task_pid_nr(current), current);
-	addr = (unsigned long)&fp->un;
-	printk("Frame format=%X ", regs->format);
-	switch (regs->format) {
-	case 0x2:
-		printk("instr addr=%08lx\n", fp->un.fmt2.iaddr);
-		addr += sizeof(fp->un.fmt2);
-		break;
-	case 0x3:
-		printk("eff addr=%08lx\n", fp->un.fmt3.effaddr);
-		addr += sizeof(fp->un.fmt3);
-		break;
-	case 0x4:
-		printk((CPU_IS_060 ? "fault addr=%08lx fslw=%08lx\n"
-			: "eff addr=%08lx pc=%08lx\n"),
-			fp->un.fmt4.effaddr, fp->un.fmt4.pc);
-		addr += sizeof(fp->un.fmt4);
-		break;
-	case 0x7:
-		printk("eff addr=%08lx ssw=%04x faddr=%08lx\n",
-			fp->un.fmt7.effaddr, fp->un.fmt7.ssw, fp->un.fmt7.faddr);
-		printk("wb 1 stat/addr/data: %04x %08lx %08lx\n",
-			fp->un.fmt7.wb1s, fp->un.fmt7.wb1a, fp->un.fmt7.wb1dpd0);
-		printk("wb 2 stat/addr/data: %04x %08lx %08lx\n",
-			fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, fp->un.fmt7.wb2d);
-		printk("wb 3 stat/addr/data: %04x %08lx %08lx\n",
-			fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, fp->un.fmt7.wb3d);
-		printk("push data: %08lx %08lx %08lx %08lx\n",
-			fp->un.fmt7.wb1dpd0, fp->un.fmt7.pd1, fp->un.fmt7.pd2,
-			fp->un.fmt7.pd3);
-		addr += sizeof(fp->un.fmt7);
-		break;
-	case 0x9:
-		printk("instr addr=%08lx\n", fp->un.fmt9.iaddr);
-		addr += sizeof(fp->un.fmt9);
-		break;
-	case 0xa:
-		printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n",
-			fp->un.fmta.ssw, fp->un.fmta.isc, fp->un.fmta.isb,
-			fp->un.fmta.daddr, fp->un.fmta.dobuf);
-		addr += sizeof(fp->un.fmta);
-		break;
-	case 0xb:
-		printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n",
-			fp->un.fmtb.ssw, fp->un.fmtb.isc, fp->un.fmtb.isb,
-			fp->un.fmtb.daddr, fp->un.fmtb.dobuf);
-		printk("baddr=%08lx dibuf=%08lx ver=%x\n",
-			fp->un.fmtb.baddr, fp->un.fmtb.dibuf, fp->un.fmtb.ver);
-		addr += sizeof(fp->un.fmtb);
-		break;
-	default:
-		printk("\n");
-	}
-	show_stack(NULL, (unsigned long *)addr);
-
-	printk("Code:");
-	set_fs(KERNEL_DS);
-	cp = (u16 *)regs->pc;
-	for (i = -8; i < 16; i++) {
-		if (get_user(c, cp + i) && i >= 0) {
-			printk(" Bad PC value.");
-			break;
-		}
-		printk(i ? " %04x" : " <%04x>", c);
-	}
-	set_fs(old_fs);
-	printk ("\n");
-}
-
-void show_stack(struct task_struct *task, unsigned long *stack)
-{
-	unsigned long *p;
-	unsigned long *endstack;
-	int i;
-
-	if (!stack) {
-		if (task)
-			stack = (unsigned long *)task->thread.esp0;
-		else
-			stack = (unsigned long *)&stack;
-	}
-	endstack = (unsigned long *)(((unsigned long)stack + THREAD_SIZE - 1) & -THREAD_SIZE);
-
-	printk("Stack from %08lx:", (unsigned long)stack);
-	p = stack;
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (p + 1 > endstack)
-			break;
-		if (i % 8 == 0)
-			printk("\n       ");
-		printk(" %08lx", *p++);
-	}
-	printk("\n");
-	show_trace(stack);
-}
-
-/*
- * The architecture-independent backtrace generator
- */
-void dump_stack(void)
-{
-	unsigned long stack;
-
-	show_trace(&stack);
-}
-
-EXPORT_SYMBOL(dump_stack);
-
-void bad_super_trap (struct frame *fp)
-{
-	console_verbose();
-	if (fp->ptregs.vector < 4 * ARRAY_SIZE(vec_names))
-		printk ("*** %s ***   FORMAT=%X\n",
-			vec_names[(fp->ptregs.vector) >> 2],
-			fp->ptregs.format);
-	else
-		printk ("*** Exception %d ***   FORMAT=%X\n",
-			(fp->ptregs.vector) >> 2,
-			fp->ptregs.format);
-	if (fp->ptregs.vector >> 2 == VEC_ADDRERR && CPU_IS_020_OR_030) {
-		unsigned short ssw = fp->un.fmtb.ssw;
-
-		printk ("SSW=%#06x  ", ssw);
-
-		if (ssw & RC)
-			printk ("Pipe stage C instruction fault at %#010lx\n",
-				(fp->ptregs.format) == 0xA ?
-				fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2);
-		if (ssw & RB)
-			printk ("Pipe stage B instruction fault at %#010lx\n",
-				(fp->ptregs.format) == 0xA ?
-				fp->ptregs.pc + 4 : fp->un.fmtb.baddr);
-		if (ssw & DF)
-			printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n",
-				ssw & RW ? "read" : "write",
-				fp->un.fmtb.daddr, space_names[ssw & DFC],
-				fp->ptregs.pc);
-	}
-	printk ("Current process id is %d\n", task_pid_nr(current));
-	die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0);
-}
-
-asmlinkage void trap_c(struct frame *fp)
-{
-	int sig;
-	siginfo_t info;
-
-	if (fp->ptregs.sr & PS_S) {
-		if (fp->ptregs.vector == VEC_TRACE << 2) {
-			/* traced a trapping instruction on a 68020/30,
-			 * real exception will be executed afterwards.
-			 */
-		} else if (!handle_kernel_fault(&fp->ptregs))
-			bad_super_trap(fp);
-		return;
-	}
-
-	/* send the appropriate signal to the user program */
-	switch ((fp->ptregs.vector) >> 2) {
-	    case VEC_ADDRERR:
-		info.si_code = BUS_ADRALN;
-		sig = SIGBUS;
-		break;
-	    case VEC_ILLEGAL:
-	    case VEC_LINE10:
-	    case VEC_LINE11:
-		info.si_code = ILL_ILLOPC;
-		sig = SIGILL;
-		break;
-	    case VEC_PRIV:
-		info.si_code = ILL_PRVOPC;
-		sig = SIGILL;
-		break;
-	    case VEC_COPROC:
-		info.si_code = ILL_COPROC;
-		sig = SIGILL;
-		break;
-	    case VEC_TRAP1:
-	    case VEC_TRAP2:
-	    case VEC_TRAP3:
-	    case VEC_TRAP4:
-	    case VEC_TRAP5:
-	    case VEC_TRAP6:
-	    case VEC_TRAP7:
-	    case VEC_TRAP8:
-	    case VEC_TRAP9:
-	    case VEC_TRAP10:
-	    case VEC_TRAP11:
-	    case VEC_TRAP12:
-	    case VEC_TRAP13:
-	    case VEC_TRAP14:
-		info.si_code = ILL_ILLTRP;
-		sig = SIGILL;
-		break;
-	    case VEC_FPBRUC:
-	    case VEC_FPOE:
-	    case VEC_FPNAN:
-		info.si_code = FPE_FLTINV;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPIR:
-		info.si_code = FPE_FLTRES;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPDIVZ:
-		info.si_code = FPE_FLTDIV;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPUNDER:
-		info.si_code = FPE_FLTUND;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPOVER:
-		info.si_code = FPE_FLTOVF;
-		sig = SIGFPE;
-		break;
-	    case VEC_ZERODIV:
-		info.si_code = FPE_INTDIV;
-		sig = SIGFPE;
-		break;
-	    case VEC_CHK:
-	    case VEC_TRAP:
-		info.si_code = FPE_INTOVF;
-		sig = SIGFPE;
-		break;
-	    case VEC_TRACE:		/* ptrace single step */
-		info.si_code = TRAP_TRACE;
-		sig = SIGTRAP;
-		break;
-	    case VEC_TRAP15:		/* breakpoint */
-		info.si_code = TRAP_BRKPT;
-		sig = SIGTRAP;
-		break;
-	    default:
-		info.si_code = ILL_ILLOPC;
-		sig = SIGILL;
-		break;
-	}
-	info.si_signo = sig;
-	info.si_errno = 0;
-	switch (fp->ptregs.format) {
-	    default:
-		info.si_addr = (void *) fp->ptregs.pc;
-		break;
-	    case 2:
-		info.si_addr = (void *) fp->un.fmt2.iaddr;
-		break;
-	    case 7:
-		info.si_addr = (void *) fp->un.fmt7.effaddr;
-		break;
-	    case 9:
-		info.si_addr = (void *) fp->un.fmt9.iaddr;
-		break;
-	    case 10:
-		info.si_addr = (void *) fp->un.fmta.daddr;
-		break;
-	    case 11:
-		info.si_addr = (void *) fp->un.fmtb.daddr;
-		break;
-	}
-	force_sig_info (sig, &info, current);
-}
-
-void die_if_kernel (char *str, struct pt_regs *fp, int nr)
-{
-	if (!(fp->sr & PS_S))
-		return;
-
-	console_verbose();
-	printk("%s: %08x\n",str,nr);
-	show_registers(fp);
-	add_taint(TAINT_DIE);
-	do_exit(SIGSEGV);
-}
-
-/*
- * This function is called if an error occur while accessing
- * user-space from the fpsp040 code.
- */
-asmlinkage void fpsp040_die(void)
-{
-	do_exit(SIGSEGV);
-}
-
-#ifdef CONFIG_M68KFPU_EMU
-asmlinkage void fpemu_signal(int signal, int code, void *addr)
-{
-	siginfo_t info;
-
-	info.si_signo = signal;
-	info.si_errno = 0;
-	info.si_code = code;
-	info.si_addr = addr;
-	force_sig_info(signal, &info, current);
-}
-#endif
diff --git a/arch/m68k/kernel/traps_no.c b/arch/m68k/kernel/traps_no.c
deleted file mode 100644
index e67b8c806959a9..00000000000000
--- a/arch/m68k/kernel/traps_no.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- *  linux/arch/m68knommu/kernel/traps.c
- *
- *  Copyright (C) 1993, 1994 by Hamish Macdonald
- *
- *  68040 fixes by Michael Rausch
- *  68040 fixes by Martin Apel
- *  68060 fixes by Roman Hodek
- *  68060 fixes by Jesper Skov
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * Sets up all exception vectors
- */
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/user.h>
-#include <linux/string.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/kallsyms.h>
-
-#include <asm/setup.h>
-#include <asm/fpu.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/traps.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/siginfo.h>
-
-static char const * const vec_names[] = {
-	"RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR",
-	"ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc",
-	"PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111",
-	"UNASSIGNED RESERVED 12", "COPROCESSOR PROTOCOL VIOLATION",
-	"FORMAT ERROR", "UNINITIALIZED INTERRUPT",
-	"UNASSIGNED RESERVED 16", "UNASSIGNED RESERVED 17",
-	"UNASSIGNED RESERVED 18", "UNASSIGNED RESERVED 19",
-	"UNASSIGNED RESERVED 20", "UNASSIGNED RESERVED 21",
-	"UNASSIGNED RESERVED 22", "UNASSIGNED RESERVED 23",
-	"SPURIOUS INTERRUPT", "LEVEL 1 INT", "LEVEL 2 INT", "LEVEL 3 INT",
-	"LEVEL 4 INT", "LEVEL 5 INT", "LEVEL 6 INT", "LEVEL 7 INT",
-	"SYSCALL", "TRAP #1", "TRAP #2", "TRAP #3",
-	"TRAP #4", "TRAP #5", "TRAP #6", "TRAP #7",
-	"TRAP #8", "TRAP #9", "TRAP #10", "TRAP #11",
-	"TRAP #12", "TRAP #13", "TRAP #14", "TRAP #15",
-	"FPCP BSUN", "FPCP INEXACT", "FPCP DIV BY 0", "FPCP UNDERFLOW",
-	"FPCP OPERAND ERROR", "FPCP OVERFLOW", "FPCP SNAN",
-	"FPCP UNSUPPORTED OPERATION",
-	"MMU CONFIGURATION ERROR"
-};
-
-void die_if_kernel(char *str, struct pt_regs *fp, int nr)
-{
-	if (!(fp->sr & PS_S))
-		return;
-
-	console_verbose();
-	printk(KERN_EMERG "%s: %08x\n",str,nr);
-	printk(KERN_EMERG "PC: [<%08lx>]\nSR: %04x  SP: %p  a2: %08lx\n",
-	       fp->pc, fp->sr, fp, fp->a2);
-	printk(KERN_EMERG "d0: %08lx    d1: %08lx    d2: %08lx    d3: %08lx\n",
-	       fp->d0, fp->d1, fp->d2, fp->d3);
-	printk(KERN_EMERG "d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
-	       fp->d4, fp->d5, fp->a0, fp->a1);
-
-	printk(KERN_EMERG "Process %s (pid: %d, stackpage=%08lx)\n",
-		current->comm, current->pid, PAGE_SIZE+(unsigned long)current);
-	show_stack(NULL, (unsigned long *)(fp + 1));
-	add_taint(TAINT_DIE);
-	do_exit(SIGSEGV);
-}
-
-asmlinkage void buserr_c(struct frame *fp)
-{
-	/* Only set esp0 if coming from user mode */
-	if (user_mode(&fp->ptregs))
-		current->thread.esp0 = (unsigned long) fp;
-
-#if defined(DEBUG)
-	printk (KERN_DEBUG "*** Bus Error *** Format is %x\n", fp->ptregs.format);
-#endif
-
-	die_if_kernel("bad frame format",&fp->ptregs,0);
-#if defined(DEBUG)
-	printk(KERN_DEBUG "Unknown SIGSEGV - 4\n");
-#endif
-	force_sig(SIGSEGV, current);
-}
-
-static void print_this_address(unsigned long addr, int i)
-{
-#ifdef CONFIG_KALLSYMS
-	printk(KERN_EMERG " [%08lx] ", addr);
-	print_symbol(KERN_CONT "%s\n", addr);
-#else
-	if (i % 5)
-		printk(KERN_CONT " [%08lx] ", addr);
-	else
-		printk(KERN_EMERG " [%08lx] ", addr);
-	i++;
-#endif
-}
-
-int kstack_depth_to_print = 48;
-
-static void __show_stack(struct task_struct *task, unsigned long *stack)
-{
-	unsigned long *endstack, addr;
-#ifdef CONFIG_FRAME_POINTER
-	unsigned long *last_stack;
-#endif
-	int i;
-
-	if (!stack)
-		stack = (unsigned long *)task->thread.ksp;
-
-	addr = (unsigned long) stack;
-	endstack = (unsigned long *) PAGE_ALIGN(addr);
-
-	printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (stack + 1 + i > endstack)
-			break;
-		if (i % 8 == 0)
-			printk(KERN_EMERG "       ");
-		printk(KERN_CONT " %08lx", *(stack + i));
-	}
-	printk("\n");
-	i = 0;
-
-#ifdef CONFIG_FRAME_POINTER
-	printk(KERN_EMERG "Call Trace:\n");
-
-	last_stack = stack - 1;
-	while (stack <= endstack && stack > last_stack) {
-
-		addr = *(stack + 1);
-		print_this_address(addr, i);
-		i++;
-
-		last_stack = stack;
-		stack = (unsigned long *)*stack;
-	}
-	printk("\n");
-#else
-	printk(KERN_EMERG "Call Trace with CONFIG_FRAME_POINTER disabled:\n");
-	while (stack <= endstack) {
-		addr = *stack++;
-		/*
-		 * If the address is either in the text segment of the kernel,
-		 * or in a region which is occupied by a module then it *may*
-		 * be the address of a calling routine; if so, print it so that
-		 * someone tracing down the cause of the crash will be able to
-		 * figure out the call path that was taken.
-		 */
-		if (__kernel_text_address(addr)) {
-			print_this_address(addr, i);
-			i++;
-		}
-	}
-	printk(KERN_CONT "\n");
-#endif
-}
-
-void bad_super_trap(struct frame *fp)
-{
-	int vector = (fp->ptregs.vector >> 2) & 0xff;
-
-	console_verbose();
-	if (vector < ARRAY_SIZE(vec_names))
-		printk (KERN_WARNING "*** %s ***   FORMAT=%X\n",
-			vec_names[vector],
-			fp->ptregs.format);
-	else
-		printk (KERN_WARNING "*** Exception %d ***   FORMAT=%X\n",
-			vector,
-			fp->ptregs.format);
-	printk (KERN_WARNING "Current process id is %d\n", current->pid);
-	die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0);
-}
-
-asmlinkage void trap_c(struct frame *fp)
-{
-	int sig;
-	int vector = (fp->ptregs.vector >> 2) & 0xff;
-	siginfo_t info;
-
-	if (fp->ptregs.sr & PS_S) {
-		if (vector == VEC_TRACE) {
-			/* traced a trapping instruction */
-		} else
-			bad_super_trap(fp);
-		return;
-	}
-
-	/* send the appropriate signal to the user program */
-	switch (vector) {
-	    case VEC_ADDRERR:
-		info.si_code = BUS_ADRALN;
-		sig = SIGBUS;
-		break;
-	    case VEC_ILLEGAL:
-	    case VEC_LINE10:
-	    case VEC_LINE11:
-		info.si_code = ILL_ILLOPC;
-		sig = SIGILL;
-		break;
-	    case VEC_PRIV:
-		info.si_code = ILL_PRVOPC;
-		sig = SIGILL;
-		break;
-	    case VEC_COPROC:
-		info.si_code = ILL_COPROC;
-		sig = SIGILL;
-		break;
-	    case VEC_TRAP1: /* gdbserver breakpoint */
-		fp->ptregs.pc -= 2;
-		info.si_code = TRAP_TRACE;
-		sig = SIGTRAP;
-		break;
-	    case VEC_TRAP2:
-	    case VEC_TRAP3:
-	    case VEC_TRAP4:
-	    case VEC_TRAP5:
-	    case VEC_TRAP6:
-	    case VEC_TRAP7:
-	    case VEC_TRAP8:
-	    case VEC_TRAP9:
-	    case VEC_TRAP10:
-	    case VEC_TRAP11:
-	    case VEC_TRAP12:
-	    case VEC_TRAP13:
-	    case VEC_TRAP14:
-		info.si_code = ILL_ILLTRP;
-		sig = SIGILL;
-		break;
-	    case VEC_FPBRUC:
-	    case VEC_FPOE:
-	    case VEC_FPNAN:
-		info.si_code = FPE_FLTINV;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPIR:
-		info.si_code = FPE_FLTRES;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPDIVZ:
-		info.si_code = FPE_FLTDIV;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPUNDER:
-		info.si_code = FPE_FLTUND;
-		sig = SIGFPE;
-		break;
-	    case VEC_FPOVER:
-		info.si_code = FPE_FLTOVF;
-		sig = SIGFPE;
-		break;
-	    case VEC_ZERODIV:
-		info.si_code = FPE_INTDIV;
-		sig = SIGFPE;
-		break;
-	    case VEC_CHK:
-	    case VEC_TRAP:
-		info.si_code = FPE_INTOVF;
-		sig = SIGFPE;
-		break;
-	    case VEC_TRACE:		/* ptrace single step */
-		info.si_code = TRAP_TRACE;
-		sig = SIGTRAP;
-		break;
-	    case VEC_TRAP15:		/* breakpoint */
-		info.si_code = TRAP_BRKPT;
-		sig = SIGTRAP;
-		break;
-	    default:
-		info.si_code = ILL_ILLOPC;
-		sig = SIGILL;
-		break;
-	}
-	info.si_signo = sig;
-	info.si_errno = 0;
-	switch (fp->ptregs.format) {
-	    default:
-		info.si_addr = (void *) fp->ptregs.pc;
-		break;
-	    case 2:
-		info.si_addr = (void *) fp->un.fmt2.iaddr;
-		break;
-	    case 7:
-		info.si_addr = (void *) fp->un.fmt7.effaddr;
-		break;
-	    case 9:
-		info.si_addr = (void *) fp->un.fmt9.iaddr;
-		break;
-	    case 10:
-		info.si_addr = (void *) fp->un.fmta.daddr;
-		break;
-	    case 11:
-		info.si_addr = (void *) fp->un.fmtb.daddr;
-		break;
-	}
-	force_sig_info (sig, &info, current);
-}
-
-asmlinkage void set_esp0(unsigned long ssp)
-{
-	current->thread.esp0 = ssp;
-}
-
-/*
- * The architecture-independent backtrace generator
- */
-void dump_stack(void)
-{
-	/*
-	 * We need frame pointers for this little trick, which works as follows:
-	 *
-	 * +------------+ 0x00
-	 * | Next SP	|	-> 0x0c
-	 * +------------+ 0x04
-	 * | Caller	|
-	 * +------------+ 0x08
-	 * | Local vars	|	-> our stack var
-	 * +------------+ 0x0c
-	 * | Next SP	|	-> 0x18, that is what we pass to show_stack()
-	 * +------------+ 0x10
-	 * | Caller	|
-	 * +------------+ 0x14
-	 * | Local vars	|
-	 * +------------+ 0x18
-	 * | ...	|
-	 * +------------+
-	 */
-
-	unsigned long *stack;
-
-	stack = (unsigned long *)&stack;
-	stack++;
-	__show_stack(current, stack);
-}
-EXPORT_SYMBOL(dump_stack);
-
-void show_stack(struct task_struct *task, unsigned long *stack)
-{
-	if (!stack && !task)
-		dump_stack();
-	else
-		__show_stack(task, stack);
-}
diff --git a/arch/m68k/kernel/vectors.c b/arch/m68k/kernel/vectors.c
new file mode 100644
index 00000000000000..147b03fbc71e53
--- /dev/null
+++ b/arch/m68k/kernel/vectors.c
@@ -0,0 +1,145 @@
+/*
+ *  vectors.c
+ *
+ *  Copyright (C) 1993, 1994 by Hamish Macdonald
+ *
+ *  68040 fixes by Michael Rausch
+ *  68040 fixes by Martin Apel
+ *  68040 fixes and writeback by Richard Zidlicky
+ *  68060 fixes by Roman Hodek
+ *  68060 fixes by Jesper Skov
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * Sets up all exception vectors
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/kallsyms.h>
+
+#include <asm/setup.h>
+#include <asm/fpu.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+/* assembler routines */
+asmlinkage void system_call(void);
+asmlinkage void buserr(void);
+asmlinkage void trap(void);
+asmlinkage void nmihandler(void);
+#ifdef CONFIG_M68KFPU_EMU
+asmlinkage void fpu_emu(void);
+#endif
+
+e_vector vectors[256];
+
+/* nmi handler for the Amiga */
+asm(".text\n"
+    __ALIGN_STR "\n"
+    "nmihandler: rte");
+
+/*
+ * this must be called very early as the kernel might
+ * use some instruction that are emulated on the 060
+ * and so we're prepared for early probe attempts (e.g. nf_init).
+ */
+void __init base_trap_init(void)
+{
+	if (MACH_IS_SUN3X) {
+		extern e_vector *sun3x_prom_vbr;
+
+		__asm__ volatile ("movec %%vbr, %0" : "=r" (sun3x_prom_vbr));
+	}
+
+	/* setup the exception vector table */
+	__asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)vectors));
+
+	if (CPU_IS_060) {
+		/* set up ISP entry points */
+		asmlinkage void unimp_vec(void) asm ("_060_isp_unimp");
+
+		vectors[VEC_UNIMPII] = unimp_vec;
+	}
+
+	vectors[VEC_BUSERR] = buserr;
+	vectors[VEC_ILLEGAL] = trap;
+	vectors[VEC_SYS] = system_call;
+}
+
+void __init trap_init (void)
+{
+	int i;
+
+	for (i = VEC_SPUR; i <= VEC_INT7; i++)
+		vectors[i] = bad_inthandler;
+
+	for (i = 0; i < VEC_USER; i++)
+		if (!vectors[i])
+			vectors[i] = trap;
+
+	for (i = VEC_USER; i < 256; i++)
+		vectors[i] = bad_inthandler;
+
+#ifdef CONFIG_M68KFPU_EMU
+	if (FPU_IS_EMU)
+		vectors[VEC_LINE11] = fpu_emu;
+#endif
+
+	if (CPU_IS_040 && !FPU_IS_EMU) {
+		/* set up FPSP entry points */
+		asmlinkage void dz_vec(void) asm ("dz");
+		asmlinkage void inex_vec(void) asm ("inex");
+		asmlinkage void ovfl_vec(void) asm ("ovfl");
+		asmlinkage void unfl_vec(void) asm ("unfl");
+		asmlinkage void snan_vec(void) asm ("snan");
+		asmlinkage void operr_vec(void) asm ("operr");
+		asmlinkage void bsun_vec(void) asm ("bsun");
+		asmlinkage void fline_vec(void) asm ("fline");
+		asmlinkage void unsupp_vec(void) asm ("unsupp");
+
+		vectors[VEC_FPDIVZ] = dz_vec;
+		vectors[VEC_FPIR] = inex_vec;
+		vectors[VEC_FPOVER] = ovfl_vec;
+		vectors[VEC_FPUNDER] = unfl_vec;
+		vectors[VEC_FPNAN] = snan_vec;
+		vectors[VEC_FPOE] = operr_vec;
+		vectors[VEC_FPBRUC] = bsun_vec;
+		vectors[VEC_LINE11] = fline_vec;
+		vectors[VEC_FPUNSUP] = unsupp_vec;
+	}
+
+	if (CPU_IS_060 && !FPU_IS_EMU) {
+		/* set up IFPSP entry points */
+		asmlinkage void snan_vec6(void) asm ("_060_fpsp_snan");
+		asmlinkage void operr_vec6(void) asm ("_060_fpsp_operr");
+		asmlinkage void ovfl_vec6(void) asm ("_060_fpsp_ovfl");
+		asmlinkage void unfl_vec6(void) asm ("_060_fpsp_unfl");
+		asmlinkage void dz_vec6(void) asm ("_060_fpsp_dz");
+		asmlinkage void inex_vec6(void) asm ("_060_fpsp_inex");
+		asmlinkage void fline_vec6(void) asm ("_060_fpsp_fline");
+		asmlinkage void unsupp_vec6(void) asm ("_060_fpsp_unsupp");
+		asmlinkage void effadd_vec6(void) asm ("_060_fpsp_effadd");
+
+		vectors[VEC_FPNAN] = snan_vec6;
+		vectors[VEC_FPOE] = operr_vec6;
+		vectors[VEC_FPOVER] = ovfl_vec6;
+		vectors[VEC_FPUNDER] = unfl_vec6;
+		vectors[VEC_FPDIVZ] = dz_vec6;
+		vectors[VEC_FPIR] = inex_vec6;
+		vectors[VEC_LINE11] = fline_vec6;
+		vectors[VEC_FPUNSUP] = unsupp_vec6;
+		vectors[VEC_UNIMPEA] = effadd_vec6;
+	}
+
+        /* if running on an amiga, make the NMI interrupt do nothing */
+	if (MACH_IS_AMIGA) {
+		vectors[VEC_INT7] = nmihandler;
+	}
+}
+
diff --git a/arch/m68k/lib/memcpy.c b/arch/m68k/lib/memcpy.c
index 06488931697475..10ca051d56b83c 100644
--- a/arch/m68k/lib/memcpy.c
+++ b/arch/m68k/lib/memcpy.c
@@ -22,6 +22,15 @@ void *memcpy(void *to, const void *from, size_t n)
 		from = cfrom;
 		n--;
 	}
+#if defined(CONFIG_M68000)
+	if ((long)from & 1) {
+		char *cto = to;
+		const char *cfrom = from;
+		for (; n; n--)
+			*cto++ = *cfrom++;
+		return xto;
+	}
+#endif
 	if (n > 2 && (long)to & 2) {
 		short *sto = to;
 		const short *sfrom = from;
diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c
index 50cd12cf28d975..1e33d39ca9a029 100644
--- a/arch/m68k/mm/init_no.c
+++ b/arch/m68k/mm/init_no.c
@@ -32,6 +32,7 @@
 #include <linux/gfp.h>
 
 #include <asm/setup.h>
+#include <asm/sections.h>
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -44,9 +45,6 @@
  */
 void *empty_zero_page;
 
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
 /*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
@@ -78,8 +76,6 @@ void __init mem_init(void)
 {
 	int codek = 0, datak = 0, initk = 0;
 	unsigned long tmp;
-	extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
-	extern unsigned int _ramend, _rambase;
 	unsigned long len = _ramend - _rambase;
 	unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
 	unsigned long end_mem   = memory_end; /* DAVIDM - this must not include kernel stack at top */
@@ -95,9 +91,9 @@ void __init mem_init(void)
 	/* this will put all memory onto the freelists */
 	totalram_pages = free_all_bootmem();
 
-	codek = (&_etext - &_stext) >> 10;
-	datak = (&_ebss - &_sdata) >> 10;
-	initk = (&__init_begin - &__init_end) >> 10;
+	codek = (_etext - _stext) >> 10;
+	datak = (_ebss - _sdata) >> 10;
+	initk = (__init_begin - __init_end) >> 10;
 
 	tmp = nr_free_pages() << PAGE_SHIFT;
 	printk(KERN_INFO "Memory available: %luk/%luk RAM, (%dk kernel code, %dk data)\n",
@@ -129,22 +125,21 @@ void free_initmem(void)
 {
 #ifdef CONFIG_RAMKERNEL
 	unsigned long addr;
-	extern char __init_begin, __init_end;
 	/*
 	 * The following code should be cool even if these sections
 	 * are not page aligned.
 	 */
-	addr = PAGE_ALIGN((unsigned long)(&__init_begin));
+	addr = PAGE_ALIGN((unsigned long) __init_begin);
 	/* next to check that the page we free is not a partial page */
-	for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
+	for (; addr + PAGE_SIZE < ((unsigned long) __init_end); addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
 		free_page(addr);
 		totalram_pages++;
 	}
 	pr_notice("Freeing unused kernel memory: %luk freed (0x%x - 0x%x)\n",
-			(addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
-			(int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
+			(addr - PAGE_ALIGN((unsigned long) __init_begin)) >> 10,
+			(int)(PAGE_ALIGN((unsigned long) __init_begin)),
 			(int)(addr - PAGE_SIZE));
 #endif
 }
diff --git a/arch/m68k/platform/520x/config.c b/arch/m68k/platform/520x/config.c
index 621238f1a219cc..8a98683f1b15a4 100644
--- a/arch/m68k/platform/520x/config.c
+++ b/arch/m68k/platform/520x/config.c
@@ -91,9 +91,9 @@ static struct resource m520x_qspi_resources[] = {
 	},
 };
 
-#define MCFQSPI_CS0    62
-#define MCFQSPI_CS1    63
-#define MCFQSPI_CS2    44
+#define MCFQSPI_CS0    46
+#define MCFQSPI_CS1    47
+#define MCFQSPI_CS2    27
 
 static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control)
 {
diff --git a/arch/m68k/platform/520x/gpio.c b/arch/m68k/platform/520x/gpio.c
index d757328563d1df..9bcc3e4b60c582 100644
--- a/arch/m68k/platform/520x/gpio.c
+++ b/arch/m68k/platform/520x/gpio.c
@@ -38,42 +38,6 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 	},
 	{
 		.gpio_chip			= {
-			.label			= "BUSCTL",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 8,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_BUSCTL,
-		.podr				= (void __iomem *) MCFGPIO_PODR_BUSCTL,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_BUSCTL,
-	},
-	{
-		.gpio_chip			= {
-			.label			= "BE",
-			.request		= mcf_gpio_request,
-			.free			= mcf_gpio_free,
-			.direction_input	= mcf_gpio_direction_input,
-			.direction_output	= mcf_gpio_direction_output,
-			.get			= mcf_gpio_get_value,
-			.set			= mcf_gpio_set_value_fast,
-			.base			= 16,
-			.ngpio			= 4,
-		},
-		.pddr				= (void __iomem *) MCFGPIO_PDDR_BE,
-		.podr				= (void __iomem *) MCFGPIO_PODR_BE,
-		.ppdr				= (void __iomem *) MCFGPIO_PPDSDR_BE,
-		.setr				= (void __iomem *) MCFGPIO_PPDSDR_BE,
-		.clrr				= (void __iomem *) MCFGPIO_PCLRR_BE,
-	},
-	{
-		.gpio_chip			= {
 			.label			= "CS",
 			.request		= mcf_gpio_request,
 			.free			= mcf_gpio_free,
@@ -81,7 +45,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value_fast,
-			.base			= 25,
+			.base			= 9,
 			.ngpio			= 3,
 		},
 		.pddr				= (void __iomem *) MCFGPIO_PDDR_CS,
@@ -99,7 +63,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value_fast,
-			.base			= 32,
+			.base			= 16,
 			.ngpio			= 4,
 		},
 		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECI2C,
@@ -117,7 +81,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value_fast,
-			.base			= 40,
+			.base			= 24,
 			.ngpio			= 4,
 		},
 		.pddr				= (void __iomem *) MCFGPIO_PDDR_QSPI,
@@ -135,7 +99,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value_fast,
-			.base			= 48,
+			.base			= 32,
 			.ngpio			= 4,
 		},
 		.pddr				= (void __iomem *) MCFGPIO_PDDR_TIMER,
@@ -153,7 +117,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value_fast,
-			.base			= 56,
+			.base			= 40,
 			.ngpio			= 8,
 		},
 		.pddr				= (void __iomem *) MCFGPIO_PDDR_UART,
@@ -171,7 +135,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value_fast,
-			.base			= 64,
+			.base			= 48,
 			.ngpio			= 8,
 		},
 		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECH,
@@ -189,7 +153,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
 			.direction_output	= mcf_gpio_direction_output,
 			.get			= mcf_gpio_get_value,
 			.set			= mcf_gpio_set_value_fast,
-			.base			= 72,
+			.base			= 56,
 			.ngpio			= 8,
 		},
 		.pddr				= (void __iomem *) MCFGPIO_PDDR_FECL,
diff --git a/arch/m68k/platform/68328/Makefile b/arch/m68k/platform/68328/Makefile
index 5e5435552d5652..e4dfd8fde068b9 100644
--- a/arch/m68k/platform/68328/Makefile
+++ b/arch/m68k/platform/68328/Makefile
@@ -2,7 +2,10 @@
 # Makefile for arch/m68knommu/platform/68328.
 #
 
-head-y			= head-$(MODEL).o
+model-y			  := ram
+model-$(CONFIG_ROMKERNEL) := rom
+
+head-y			= head-$(model-y).o
 head-$(CONFIG_PILOT)	= head-pilot.o
 head-$(CONFIG_DRAGEN2)	= head-de2.o
 
diff --git a/arch/m68k/platform/68328/entry.S b/arch/m68k/platform/68328/entry.S
index 293e1eba9accd3..5c39b80ed7de0b 100644
--- a/arch/m68k/platform/68328/entry.S
+++ b/arch/m68k/platform/68328/entry.S
@@ -67,7 +67,7 @@ ret_from_signal:
 	jra	ret_from_exception
 
 ENTRY(system_call)
-	SAVE_ALL
+	SAVE_ALL_SYS
 
 	/* save top of frame*/
 	pea	%sp@
@@ -129,7 +129,7 @@ Lsignal_return:
  * This is the main interrupt handler, responsible for calling process_int()
  */
 inthandler1:
-	SAVE_ALL
+	SAVE_ALL_INT
 	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
@@ -140,7 +140,7 @@ inthandler1:
 	bra	ret_from_interrupt
 
 inthandler2:
-	SAVE_ALL
+	SAVE_ALL_INT
 	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
@@ -151,7 +151,7 @@ inthandler2:
 	bra	ret_from_interrupt
 
 inthandler3:
-	SAVE_ALL
+	SAVE_ALL_INT
 	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
@@ -162,7 +162,7 @@ inthandler3:
 	bra	ret_from_interrupt
 
 inthandler4:
-	SAVE_ALL
+	SAVE_ALL_INT
 	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
@@ -173,7 +173,7 @@ inthandler4:
 	bra	ret_from_interrupt
 
 inthandler5:
-	SAVE_ALL
+	SAVE_ALL_INT
 	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
@@ -184,7 +184,7 @@ inthandler5:
 	bra	ret_from_interrupt
 
 inthandler6:
-	SAVE_ALL
+	SAVE_ALL_INT
 	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
@@ -195,7 +195,7 @@ inthandler6:
 	bra	ret_from_interrupt
 
 inthandler7:
-	SAVE_ALL
+	SAVE_ALL_INT
 	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
@@ -206,7 +206,7 @@ inthandler7:
 	bra	ret_from_interrupt
 
 inthandler:
-	SAVE_ALL
+	SAVE_ALL_INT
 	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and	#0x3ff, %d0
 
diff --git a/arch/m68k/platform/68360/Makefile b/arch/m68k/platform/68360/Makefile
index cf5af73a57899c..f6f43438304935 100644
--- a/arch/m68k/platform/68360/Makefile
+++ b/arch/m68k/platform/68360/Makefile
@@ -1,10 +1,12 @@
 #
 # Makefile for arch/m68knommu/platform/68360.
 #
+model-y			  := ram
+model-$(CONFIG_ROMKERNEL) := rom
 
 obj-y := config.o commproc.o entry.o ints.o
 
 extra-y := head.o
 
-$(obj)/head.o: $(obj)/head-$(MODEL).o
-	ln -sf head-$(MODEL).o $(obj)/head.o
+$(obj)/head.o: $(obj)/head-$(model-y).o
+	ln -sf head-$(model-y).o $(obj)/head.o
diff --git a/arch/m68k/platform/68360/entry.S b/arch/m68k/platform/68360/entry.S
index abbb89672ea027..aa47d1d49929cb 100644
--- a/arch/m68k/platform/68360/entry.S
+++ b/arch/m68k/platform/68360/entry.S
@@ -63,7 +63,7 @@ ret_from_signal:
 	jra	ret_from_exception
 
 ENTRY(system_call)
-	SAVE_ALL
+	SAVE_ALL_SYS
 
 	/* save top of frame*/
 	pea	%sp@
@@ -125,7 +125,7 @@ Lsignal_return:
  * This is the main interrupt handler, responsible for calling do_IRQ()
  */
 inthandler:
-	SAVE_ALL
+	SAVE_ALL_INT
 	movew	%sp@(PT_OFF_FORMATVEC), %d0
 	and.l	#0x3ff, %d0
 	lsr.l   #0x02,  %d0
diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S
index bd27242c2f431d..3157461a8d1da8 100644
--- a/arch/m68k/platform/coldfire/entry.S
+++ b/arch/m68k/platform/coldfire/entry.S
@@ -61,7 +61,7 @@ enosys:
 	bra	1f
 
 ENTRY(system_call)
-	SAVE_ALL
+	SAVE_ALL_SYS
 	move	#0x2000,%sr		/* enable intrs again */
 
 	cmpl	#NR_syscalls,%d0
@@ -165,9 +165,7 @@ Lsignal_return:
  * sources). Calls up to high level code to do all the work.
  */
 ENTRY(inthandler)
-	SAVE_ALL
-	moveq	#-1,%d0
-	movel	%d0,%sp@(PT_OFF_ORIG_D0)
+	SAVE_ALL_INT
 
 	movew	%sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
 	andl	#0x03fc,%d0		/* mask out vector only */