| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* maint-2.44: (41 commits)
Git 2.44.1
Git 2.43.4
Git 2.42.2
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
...
|
|
* maint-2.43: (40 commits)
Git 2.43.4
Git 2.42.2
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
...
|
|
* maint-2.42: (39 commits)
Git 2.42.2
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
...
|
|
* maint-2.41: (38 commits)
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
...
|
|
* maint-2.40: (39 commits)
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
upload-pack: disable lazy-fetching by default
...
|
|
The ability to configuring the template directory is a delicate feature:
It allows defining hooks that will be run e.g. during a `git clone`
operation, such as the `post-checkout` hook.
As such, it is of utmost importance that Git would not allow that config
setting to be changed during a `git clone` by mistake, allowing an
attacker a chance for a Remote Code Execution, allowing attackers to run
arbitrary code on unsuspecting users' machines.
As a defense-in-depth measure, to prevent minor vulnerabilities in the
`git clone` code from ballooning into higher-serverity attack vectors,
let's make this a protected setting just like `safe.directory` and
friends, i.e. ignore any `init.templateDir` entries from any local
config.
Note: This does not change the behavior of any recursive clone (modulo
bugs), as the local repository config is not even supposed to be written
while cloning the superproject, except in one scenario: If a config
template is configured that sets the template directory. This might be
done because `git clone --recurse-submodules --template=<directory>`
does not pass that template directory on to the submodules'
initialization.
Another scenario where this commit changes behavior is where
repositories are _not_ cloned recursively, and then some (intentional,
benign) automation configures the template directory to be used before
initializing the submodules.
So the caveat is that this could theoretically break existing processes.
In both scenarios, there is a way out, though: configuring the template
directory via the environment variable `GIT_TEMPLATE_DIR`.
This change in behavior is a trade-off between security and
backwards-compatibility that is struck in favor of security.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
We will need to call this function from `hook.c` to be able to prevent
hooks from running that were written as part of a `clone` but did not
originate from the template directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
When cloning from somebody else's repositories, it is possible that,
say, the `upload-pack` command is overridden in the repository that is
about to be cloned, which would then be run in the user's context who
started the clone.
To remind the user that this is a potentially unsafe operation, let's
extend the ownership checks we have already established for regular
gitdir discovery to extend also to local repositories that are about to
be cloned.
This protection extends also to file:// URLs.
The fixes in this commit address CVE-2024-32004.
Note: This commit does not touch the `fetch`/`clone` code directly, but
instead the function used implicitly by both: `enter_repo()`. This
function is also used by `git receive-pack` (i.e. pushes), by `git
upload-archive`, by `git daemon` and by `git http-backend`. In setups
that want to serve repositories owned by different users than the
account running the service, this will require `safe.*` settings to be
configured accordingly.
Also note: there are tiny time windows where a time-of-check-time-of-use
("TOCTOU") race is possible. The real solution to those would be to work
with `fstat()` and `openat()`. However, the latter function is not
available on Windows (and would have to be emulated with rather
expensive low-level `NtCreateFile()` calls), and the changes would be
quite extensive, for my taste too extensive for the little gain given
that embargoed releases need to pay extra attention to avoid introducing
inadvertent bugs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
Work to support a repository that work with both SHA-1 and SHA-256
hash algorithms has started.
* eb/hash-transition: (30 commits)
t1016-compatObjectFormat: add tests to verify the conversion between objects
t1006: test oid compatibility with cat-file
t1006: rename sha1 to oid
test-lib: compute the compatibility hash so tests may use it
builtin/ls-tree: let the oid determine the output algorithm
object-file: handle compat objects in check_object_signature
tree-walk: init_tree_desc take an oid to get the hash algorithm
builtin/cat-file: let the oid determine the output algorithm
rev-parse: add an --output-object-format parameter
repository: implement extensions.compatObjectFormat
object-file: update object_info_extended to reencode objects
object-file-convert: convert commits that embed signed tags
object-file-convert: convert commit objects when writing
object-file-convert: don't leak when converting tag objects
object-file-convert: convert tag objects when writing
object-file-convert: add a function to convert trees between algorithms
object: factor out parse_mode out of fast-import and tree-walk into in object.h
cache: add a function to read an OID of a specific algorithm
tag: sign both hashes
commit: export add_header_signature to support handling signatures on tags
...
|
|
Users with safe.bareRepository=explicit can still work from within
$GIT_DIR of a seconary worktree (which resides at .git/worktrees/$name/)
of the primary worktree without explicitly specifying the $GIT_DIR
environment variable or the --git-dir=<path> option.
* jc/safe-implicit-bare:
setup: notice more types of implicit bare repositories
|
|
Code simplification.
* gt/core-bare-in-templates:
setup: remove unnecessary variable
|
|
Setting the safe.bareRepository configuration variable to explicit
stops git from using a bare repository, unless the repository is
explicitly specified, either by the "--git-dir=<path>" command line
option, or by exporting $GIT_DIR environment variable. This may be
a reasonable measure to safeguard users from accidentally straying
into a bare repository in unexpected places, but often gets in the
way of users who need valid accesses to the repository.
Earlier, 45bb9162 (setup: allow cwd=.git w/ bareRepository=explicit,
2024-01-20) loosened the rule such that being inside the ".git"
directory of a non-bare repository does not really count as
accessing a "bare" repository. The reason why such a loosening is
needed is because often hooks and third-party tools run from within
$GIT_DIR while working with a non-bare repository.
More importantly, the reason why this is safe is because a directory
whose contents look like that of a "bare" repository cannot be a
bare repository that came embedded within a checkout of a malicious
project, as long as its directory name is ".git", because ".git" is
not a name allowed for a directory in payload.
There are at least two other cases where tools have to work in a
bare-repository looking directory that is not an embedded bare
repository, and accesses to them are still not allowed by the recent
change.
- A secondary worktree (whose name is $name) has its $GIT_DIR
inside "worktrees/$name/" subdirectory of the $GIT_DIR of the
primary worktree of the same repository.
- A submodule worktree (whose name is $name) has its $GIT_DIR
inside "modules/$name/" subdirectory of the $GIT_DIR of its
superproject.
As long as the primary worktree or the superproject in these cases
are not bare, the pathname of these "looks like bare but not really"
directories will have "/.git/worktrees/" and "/.git/modules/" as a
substring in its leading part, and we can take advantage of the same
security guarantee allow git to work from these places.
Extend the earlier "in a directory called '.git' we are OK" logic
used for the primary worktree to also cover the secondary worktree's
and non-embedded submodule's $GIT_DIR, by moving the logic to a
helper function "is_implicit_bare_repo()". We deliberately exclude
secondary worktrees and submodules of a bare repository, as these
are exactly what safe.bareRepository=explicit setting is designed to
forbid accesses to without an explicit GIT_DIR/--git-dir=<path>
Helped-by: Kyle Lippincott <spectral@google.com>
Helped-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The TODO comment suggested to heed core.bare from template config file
if no command line override given. And the prev_bare_repository
variable seems to have been placed for this sole purpose as it is not
used anywhere else.
However, it was clarified by Junio [1] that such values (including
core.bare) are ignored intentionally and does not make sense to
propagate them from template config to repository config. Also, the
directories for the worktree and repository are already created, and
therefore the bare/non-bare decision has already been made, by the
point we reach the codepath where the TODO comment is placed.
Therefore, prev_bare_repository does not have a usecase with/without
supporting core.bare from template. And the removal of
prev_bare_repository is safe as proved by the later part of the
comment:
"Unfortunately, the line above is equivalent to
is_bare_repository_cfg = !work_tree;
which ignores the config entirely even if no `--[no-]bare`
command line option was present.
To see why, note that before this function, there was this call:
prev_bare_repository = is_bare_repository()
expanding the right hand side:
= is_bare_repository_cfg && !get_git_work_tree()
= is_bare_repository_cfg && !work_tree
note that the last simplification above is valid because nothing
calls repo_init() or set_git_work_tree() between any of the
relevant calls in the code, and thus the !get_git_work_tree()
calls will return the same result each time. So, what we are
interested in computing is the right hand side of the line of
code just above this comment:
prev_bare_repository || !work_tree
= is_bare_repository_cfg && !work_tree || !work_tree
= !work_tree
because "A && !B || !B == !B" for all boolean values of A & B."
Therefore, remove the TODO comment and remove prev_bare_repository
variable. Also, update relevant testcases and remove one redundant
testcase.
[1]: https://lore.kernel.org/git/xmqqjzonpy9l.fsf@gitster.g/
Helped-by: Elijah Newren <newren@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 18c9cb7524 (builtin/clone: create the refdb with the correct object
format, 2023-12-12), we have changed git-clone(1) so that it delays
creation of the refdb until after it has learned about the remote's
object format. This change was required for the reftable backend, which
encodes the object format into the tables. So if we pre-initialized the
refdb with the default object format, but the remote uses a different
object format than that, then the resulting tables would have encoded
the wrong object format.
This change unfortunately breaks remote helpers which try to access the
repository that is about to be created. Because the refdb has not yet
been initialized at the point where we spawn the remote helper, we also
don't yet have "HEAD" or "refs/". Consequently, any Git commands ran by
the remote helper which try to access the repository would fail because
it cannot be discovered.
This is essentially a chicken-and-egg problem: we cannot initialize the
refdb because we don't know about the object format. But we cannot learn
about the object format because the remote helper may be unable to
access the partially-initialized repository.
Ideally, we would address this issue via capabilities. But the remote
helper protocol is not structured in a way that guarantees that the
capability announcement happens before the remote helper tries to access
the repository.
Instead, fix this issue by partially initializing the refdb up to the
point where it becomes discoverable by Git commands.
Reported-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
The "disable repository discovery of a bare repository" check,
triggered by setting safe.bareRepository configuration variable to
'explicit', has been loosened to exclude the ".git/" directory inside
a non-bare repository from the check. So you can do "cd .git &&
git cmd" to run a Git command that works on a bare repository without
explicitly specifying $GIT_DIR now.
* kl/allow-working-in-dot-git-in-non-bare-repository:
setup: allow cwd=.git w/ bareRepository=explicit
|
|
Instead of manually creating refs/ hierarchy on disk upon a
creation of a secondary worktree, which is only usable via the
files backend, use the refs API to populate it.
* ps/worktree-refdb-initialization:
builtin/worktree: create refdb via ref backend
worktree: expose interface to look up worktree by name
builtin/worktree: move setup of commondir file earlier
refs/files: skip creation of "refs/{heads,tags}" for worktrees
setup: move creation of "refs/" into the files backend
refs: prepare `refs_init_db()` for initializing worktree refs
|
|
The safe.bareRepository setting can be set to 'explicit' to disallow
implicit uses of bare repositories, preventing an attack [1] where an
artificial and malicious bare repository is embedded in another git
repository. Unfortunately, some tooling uses myrepo/.git/ as the cwd
when executing commands, and this is blocked when
safe.bareRepository=explicit. Blocking is unnecessary, as git already
prevents nested .git directories.
Teach git to not reject uses of git inside of the .git directory: check
if cwd is .git (or a subdirectory of it) and allow it even if
safe.bareRepository=explicit.
[1] https://github.com/justinsteven/advisories/blob/main/2022_git_buried_bare_repos_and_fsmonitor_various_abuses.md
Signed-off-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new extension "refstorage" so that we can mark a
repository that uses a non-default ref backend, like reftable.
* ps/refstorage-extension:
t9500: write "extensions.refstorage" into config
builtin/clone: introduce `--ref-format=` value flag
builtin/init: introduce `--ref-format=` value flag
builtin/rev-parse: introduce `--show-ref-format` flag
t: introduce GIT_TEST_DEFAULT_REF_FORMAT envvar
setup: introduce GIT_DEFAULT_REF_FORMAT envvar
setup: introduce "extensions.refStorage" extension
setup: set repository's formats on init
setup: start tracking ref storage format
refs: refactor logic to look up storage backends
worktree: skip reading HEAD when repairing worktrees
t: introduce DEFAULT_REPO_FORMAT prereq
|
|
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
|
|
When creating the ref database we unconditionally create the "refs/"
directory in "setup.c". This is a mandatory prerequisite for all Git
repositories regardless of the ref backend in use, because Git will be
unable to detect the directory as a repository if "refs/" doesn't exist.
We are about to add another new caller that will want to create a ref
database when creating worktrees. We would require the same logic to
create the "refs/" directory even though the caller really should not
care about such low-level details. Ideally, the ref database should be
fully initialized after calling `refs_init_db()`.
Move the code to create the directory into the files backend itself to
make it so. This means that future ref backends will also need to have
equivalent logic around to ensure that the directory exists, but it
seems a lot more sensible to have it this way round than to require
callers to create the directory themselves.
An alternative to this would be to create "refs/" in `refs_init_db()`
directly. This feels conceptually unclean though as the creation of the
refdb is now cluttered across different callsites. Furthermore, both the
"files" and the upcoming "reftable" backend write backend-specific data
into the "refs/" directory anyway, so splitting up this logic would only
make it harder to reason about.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The purpose of `refs_init_db()` is to initialize the on-disk files of a
new ref database. The function is quite inflexible right now though, as
callers can neither specify the `struct ref_store` nor can they pass any
flags.
Refactor the interface to accept both of these. This will be required so
that we can start initializing per-worktree ref databases via the ref
backend instead of open-coding the initialization in "worktree.c".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new GIT_DEFAULT_REF_FORMAT environment variable that lets
users control the default ref format used by both git-init(1) and
git-clone(1). This is modeled after GIT_DEFAULT_OBJECT_FORMAT, which
does the same thing for the repository's object format.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new "extensions.refStorage" extension that allows us to
specify the ref storage format used by a repository. For now, the only
supported format is the "files" format, but this list will likely soon
be extended to also support the upcoming "reftable" format.
There have been discussions on the Git mailing list in the past around
how exactly this extension should look like. One alternative [1] that
was discussed was whether it would make sense to model the extension in
such a way that backends are arbitrarily stackable. This would allow for
a combined value of e.g. "loose,packed-refs" or "loose,reftable", which
indicates that new refs would be written via "loose" files backend and
compressed into "packed-refs" or "reftable" backends, respectively.
It is arguable though whether this flexibility and the complexity that
it brings with it is really required for now. It is not foreseeable that
there will be a proliferation of backends in the near-term future, and
the current set of existing formats and formats which are on the horizon
can easily be configured with the much simpler proposal where we have a
single value, only.
Furthermore, if we ever see that we indeed want to gain the ability to
arbitrarily stack the ref formats, then we can adapt the current
extension rather easily. Given that Git clients will refuse any unknown
value for the "extensions.refStorage" extension they would also know to
ignore a stacked "loose,packed-refs" in the future.
So let's stick with the easy proposal for the time being and wire up the
extension.
[1]: <pull.1408.git.1667846164.gitgitgadget@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The proper hash algorithm and ref storage format that will be used for a
newly initialized repository will be figured out in `init_db()` via
`validate_hash_algorithm()` and `validate_ref_storage_format()`. Until
now though, we never set up the hash algorithm or ref storage format of
`the_repository` accordingly.
There are only two callsites of `init_db()`, one in git-init(1) and one
in git-clone(1). The former function doesn't care for the formats to be
set up properly because it never access the repository after calling the
function in the first place.
For git-clone(1) it's a different story though, as we call `init_db()`
before listing remote refs. While we do indeed have the wrong hash
function in `the_repository` when `init_db()` sets up a non-default
object format for the repository, it never mattered because we adjust
the hash after learning about the remote's hash function via the listed
refs.
So the current state is correct for the hash algo, but it's not for the
ref storage format because git-clone(1) wouldn't know to set it up
properly. But instead of adjusting only the `ref_storage_format`, set
both the hash algo and the ref storage format so that `the_repository`
is in the correct state when `init_db()` exits. This is fine as we will
adjust the hash later on anyway and makes it easier to reason about the
end state of `the_repository`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to discern which ref storage format a repository is supposed to
use we need to start setting up and/or discovering the format. This
needs to happen in two separate code paths.
- The first path is when we create a repository via `init_db()`. When
we are re-initializing a preexisting repository we need to retain
the previously used ref storage format -- if the user asked for a
different format then this indicates an error and we error out.
Otherwise we either initialize the repository with the format asked
for by the user or the default format, which currently is the
"files" backend.
- The second path is when discovering repositories, where we need to
read the config of that repository. There is not yet any way to
configure something other than the "files" backend, so we can just
blindly set the ref storage format to this backend.
Wire up this logic so that we have the ref storage format always readily
available when needed. As there is only a single backend and because it
is not configurable we cannot yet verify that this tracking works as
expected via tests, but tests will be added in subsequent commits. To
countermand this ommission now though, raise a BUG() in case the ref
storage format is not set up properly in `ref_store_init()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone" has been prepared to allow cloning a repository with
non-default hash function into a repository that uses the reftable
backend.
* ps/clone-into-reftable-repository:
builtin/clone: create the refdb with the correct object format
builtin/clone: skip reading HEAD when retrieving remote
builtin/clone: set up sparse checkout later
builtin/clone: fix bundle URIs with mismatching object formats
remote-curl: rediscover repository when fetching refs
setup: allow skipping creation of the refdb
setup: extract function to create the refdb
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ps/clone-into-reftable-repository:
builtin/clone: create the refdb with the correct object format
builtin/clone: skip reading HEAD when retrieving remote
builtin/clone: set up sparse checkout later
builtin/clone: fix bundle URIs with mismatching object formats
remote-curl: rediscover repository when fetching refs
setup: allow skipping creation of the refdb
setup: extract function to create the refdb
|
|
We're currently creating the reference database with a potentially
incorrect object format when the remote repository's object format is
different from the local default object format. This works just fine for
now because the files backend never records the object format anywhere.
But this logic will fail with any new reference backend that encodes
this information in some form either on-disk or in-memory.
The preceding commits have reshuffled code in git-clone(1) so that there
is no code path that will access the reference database before we have
detected the remote's object format. With these refactorings we can now
defer initialization of the reference database until after we have
learned the remote's object format and thus initialize it with the
correct format from the get-go.
These refactorings are required to make git-clone(1) work with the
upcoming reftable backend when cloning repositories with the SHA256
object format.
This change breaks a test in "t5550-http-fetch-dumb.sh" when cloning an
empty repository with `GIT_TEST_DEFAULT_HASH=sha256`. The test expects
the resulting hash format of the empty cloned repository to match the
default hash, but now we always end up with a sha1 repository. The
problem is that for dumb HTTP fetches, we have no easy way to figure out
the remote's hash function except for deriving it based on the hash
length of refs in `info/refs`. But as the remote repository is empty we
cannot rely on this detection mechanism.
Before the change in this commit we already initialized the repository
with the default hash function and then left it as-is. With this patch
we always use the hash function detected via the remote, where we fall
back to "sha1" in case we cannot detect it.
Neither the old nor the new behaviour are correct as we second-guess the
remote hash function in both cases. But given that this is a rather
unlikely edge case (we use the dumb HTTP protocol, the remote repository
uses SHA256 and the remote repository is empty), let's simply adapt the
test to assert the new behaviour. If we want to properly address this
edge case in the future we will have to extend the dumb HTTP protocol so
that we can properly detect the hash function for empty repositories.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow callers to skip creation of the reference database via a new flag
`INIT_DB_SKIP_REFDB`, which is required for git-clone(1) so that we can
create it at a later point once the object format has been discovered
from the remote repository.
Note that we also uplift the call to `create_reference_database()` into
`init_db()`, which makes it easier to handle the new flag for us. This
changes the order in which we do initialization so that we now set up
the Git configuration before we create the reference database. In
practice this move should not result in any change in behaviour.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're about to let callers skip creation of the reference database when
calling `init_db()`. Extract the logic into a standalone function so
that it becomes easier to do this refactoring.
While at it, expand the comment that explains why we always create the
"refs/" directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "partialclone" extension config records a string, and hence it is an
error to have an implicit bool like:
[extensions]
partialclone
in your config. We should recognize and reject this, rather than
segfaulting (which is the current behavior). Note that it's OK to use
config_error_nonbool() here, even though the return value is an enum. We
explicitly document EXTENSION_ERROR as -1 for compatibility with
error(), etc.
This is the only extension value that has this problem. Most of the
others are bools that interpret this value naturally. The exception is
extensions.objectformat, which does correctly check for NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While populating the `repository_format` structure may cause us to
allocate memory, we do not call `clear_repository_format()` in some
places and thus potentially leak memory. Fix this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `upgrade_repository_format()` function has multiple exit paths,
which means that there is no common cleanup of acquired resources.
While this isn't much of a problem right now, we're about to fix a
memory leak that would require us to free the resource in every one of
those exit paths.
Refactor the code to have a common exit path so that the subsequent
memory leak fix becomes easier to implement.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Scalar updates.
* ds/scalar-updates:
scalar reconfigure: help users remove buggy repos
setup: add discover_git_directory_reason()
scalar: add --[no-]src option
|
|
Add a configuration option to enable updating and reading from
compatibility hash maps when git accesses the reposotiry.
Call the helper function repo_set_compat_hash_algo with the value
that compatObjectFormat is set to.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently have support for using a full stage 4 SHA-256
implementation. However, we'd like to support interoperability with
SHA-1 repositories as well. The transition plan anticipates a
compatibility hash algorithm configuration option that we can use to
implement support for this. Let's add an element to the repository
structure that indicates the compatibility hash algorithm so we can use
it when we need to consider interoperability between algorithms.
Add a helper function repo_set_compat_hash_algo that takes a
compatibility hash algorithm and sets "repo->compat_hash_algo". If
GIT_HASH_UNKNOWN is passed as the compatibility hash algorithm
"repo->compat_hash_algo" is set to NULL.
For now, the code results in "repo->compat_hash_algo" always being set
to NULL, but that will change once a configuration option is added.
Inspired-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many reasons why discovering a Git directory may fail. In
particular, 8959555cee7 (setup_git_directory(): add an owner check for
the top-level directory, 2022-03-02) added ownership checks as a
security precaution.
Callers attempting to set up a Git directory may want to inform the user
about the reason for the failure. For that, expose the enum
discovery_result from within setup.c and move it into cache.h where
discover_git_directory() is defined.
I initially wanted to change the return type of discover_git_directory()
to be this enum, but several callers rely upon the "zero means success".
The two problems with this are:
1. The zero value of the enum is actually GIT_DIR_NONE, so nonpositive
results are errors.
2. There are multiple successful states; positive results are
successful.
It is worth noting that GIT_DIR_NONE is not returned, so we remove this
option from the enum. We must be careful to keep the successful reasons
as positive values, so they are given explicit positive values.
Instead of updating all callers immediately, add a new method,
discover_git_directory_reason(), and convert discover_git_directory() to
be a thin shim on top of it.
One thing that is important to note is that discover_git_directory()
previously returned -1 on error, so let's continue that into the future.
There is only one caller (in scalar.c) that depends on that signedness
instead of a non-zero check, so clean that up, too.
Because there are extra checks that discover_git_directory_reason() does
after setup_git_directory_gently_1(), there are other modes that can be
returned for failure states. Add these modes to the enum, but be sure to
explicitly add them as BUG() states in the switch of
setup_git_directory_gently().
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
|
|
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
|
|
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Header files cleanup.
* en/header-split-cache-h-part-3: (28 commits)
fsmonitor-ll.h: split this header out of fsmonitor.h
hash-ll, hashmap: move oidhash() to hash-ll
object-store-ll.h: split this header out of object-store.h
khash: name the structs that khash declares
merge-ll: rename from ll-merge
git-compat-util.h: remove unneccessary include of wildmatch.h
builtin.h: remove unneccessary includes
list-objects-filter-options.h: remove unneccessary include
diff.h: remove unnecessary include of oidset.h
repository: remove unnecessary include of path.h
log-tree: replace include of revision.h with simple forward declaration
cache.h: remove this no-longer-used header
read-cache*.h: move declarations for read-cache.c functions from cache.h
repository.h: move declaration of the_index from cache.h
merge.h: move declarations for merge.c from cache.h
diff.h: move declaration for global in diff.c from cache.h
preload-index.h: move declarations for preload-index.c from elsewhere
sparse-index.h: move declarations for sparse-index.c from cache.h
name-hash.h: move declarations for name-hash.c from cache.h
run-command.h: move declarations for run-command.c from cache.h
...
|
|
Plumb "struct key_value_info" through all code paths that end in
die_bad_number(), which lets us remove the helper functions that read
analogous values from "struct config_reader". As a result, nothing reads
config_reader.config_kvi any more, so remove that too.
In config.c, this requires changing the signature of
git_configset_get_value() to 'return' "kvi" in an out parameter so that
git_configset_get_<type>() can pass it to git_config_<type>(). Only
numeric types will use "kvi", so for non-numeric types (e.g.
git_configset_get_string()), pass NULL to indicate that the out
parameter isn't needed.
Outside of config.c, config callbacks now need to pass "ctx->kvi" to any
of the git_config_<type>() functions that parse a config string into a
number type. Included is a .cocci patch to make that refactor.
The only exceptional case is builtin/config.c, where git_config_<type>()
is called outside of a config callback (namely, on user-provided input),
so config source information has never been available. In this case,
die_bad_number() defaults to a generic, but perfectly descriptive
message. Let's provide a safe, non-NULL for "kvi" anyway, but make sure
not to change the message.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
discover_git_directory() no longer touches the_repository.
* gc/discover-not-setup:
setup.c: don't setup in discover_git_directory()
|
|
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The functions init_db() and initialize_repository_version() were shared
by builtin/init-db.c and builtin/clone.c, and declared in cache.h.
Move these functions, plus their several helpers only used by these
functions, to setup.[ch].
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
discover_git_directory() started modifying the_repository in ebaf3bcf1ae
(repository: move global r_f_p_c to repo struct, 2021-06-17), when, in
the repository setup process, we started copying members from the
"struct repository_format" we're inspecting to the appropriate "struct
repository". However, discover_git_directory() isn't actually used in
the setup process (its only caller in the Git binary is
read_early_config()), so it shouldn't be doing this setup at all!
As explained by 16ac8b8db6 (setup: introduce the
discover_git_directory() function, 2017-03-13) and the comment on its
declaration, discover_git_directory() is intended to be an entrypoint
into setup.c machinery that allows the Git directory to be discovered
without side effects, e.g. so that read_early_config() can read
".git/config" before the_repository has been set up.
Fortunately, we didn't start to rely on this unintended behavior between
then and now, so we let's just remove it. It isn't harming anyone, but
it's confusing.
Signed-off-by: Glen Choo <chooglen@google.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move 'repository_format_worktree_config' out of the global scope and into
the 'repository' struct. This change is similar to how
'repository_format_partial_clone' was moved in ebaf3bcf1ae (repository: move
global r_f_p_c to repo struct, 2021-06-17), adding it to the 'repository'
struct and updating 'setup.c' & 'repository.c' functions to assign the value
appropriately.
The primary goal of this change is to be able to load the worktree config of
a submodule depending on whether that submodule - not its superproject - has
'extensions.worktreeConfig' enabled. To ensure 'do_git_config_sequence()'
has access to the newly repo-scoped configuration, add a 'struct repository'
argument to 'do_git_config_sequence()' and pass it the 'repo' value from
'config_with_options()'.
Finally, add/update tests in 't3007-ls-files-recurse-submodules.sh' to
verify 'extensions.worktreeConfig' is read an used independently by
superprojects and submodules.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
safe.bareRepository=explicit is a safer default mode of operation, since
it guards against the embedded bare repository attack [1]. Most end
users don't use bare repositories directly, so they should be able to
set safe.bareRepository=explicit, with the expectation that they can
reenable bare repositories by specifying GIT_DIR or --git-dir.
However, the user might use a tool that invokes Git on bare repositories
without setting GIT_DIR (e.g. "go mod" will clone bare repositories
[2]), so even if a user wanted to use safe.bareRepository=explicit, it
wouldn't be feasible until their tools learned to set GIT_DIR.
To make this transition easier, add a trace message to note when we
attempt to set up a bare repository without setting GIT_DIR. This allows
users and tool developers to audit which of their tools are problematic
and report/fix the issue. When they are sufficiently confident, they
would switch over to "safe.bareRepository=explicit".
Note that this uses trace2_data_string(), which isn't supported by the
"normal" GIT_TRACE2 target, only _EVENT or _PERF.
[1] https://lore.kernel.org/git/kl6lsfqpygsj.fsf@chooglen-macbookpro.roam.corp.google.com/
[2] https://go.dev/ref/mod
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cache.h's nature of a dumping ground of includes prevented it from
being included in some compat/ files, forcing us into a workaround
of having a double forward declaration of the read_in_full() function
(see commit 14086b0a13 ("compat/pread.c: Add a forward declaration to
fix a warning", 2007-11-17)). Now that we have moved functions like
read_in_full() from cache.h to wrapper.h, and wrapper.h isn't littered
with unrelated and scary #defines, get rid of the extra forward
declaration and just have compat/pread.c include wrapper.h.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Platform-specific code that determines if a directory is OK to use
as a repository has been taught to report more details, especially
on Windows.
* js/safe-directory-plus:
mingw: handle a file owned by the Administrators group correctly
mingw: be more informative when ownership check fails on FAT32
mingw: provide details about unsafe directories' ownership
setup: prepare for more detailed "dubious ownership" messages
setup: fix some formatting
|
|
When verifying the ownership of the Git directory, we sometimes would
like to say a bit more about it, e.g. when using a platform-dependent
code path (think: Windows has the permission model that is so different
from Unix'), but only when it is a appropriate to actually say
something.
To allow for that, collect that information and hand it back to the
caller (whose responsibility it is to show it or not).
Note: We do not actually fill in any platform-dependent information yet,
this commit just adds the infrastructure to be able to do so.
Based-on-an-idea-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for touching code that was introduced in 3b0bf2704980
(setup: tighten ownership checks post CVE-2022-24765, 2022-05-10) and
that was formatted differently than preferred in the Git project, fix
the indentation before actually modifying the code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is a known social engineering attack that takes advantage of the
fact that a working tree can include an entire bare repository,
including a config file. A user could run a Git command inside the bare
repository thinking that the config file of the 'outer' repository would
be used, but in reality, the bare repository's config file (which is
attacker-controlled) is used, which may result in arbitrary code
execution. See [1] for a fuller description and deeper discussion.
A simple mitigation is to forbid bare repositories unless specified via
`--git-dir` or `GIT_DIR`. In environments that don't use bare
repositories, this would be minimally disruptive.
Create a config variable, `safe.bareRepository`, that tells Git whether
or not to die() when working with a bare repository. This config is an
enum of:
- "all": allow all bare repositories (this is the default)
- "explicit": only allow bare repositories specified via --git-dir
or GIT_DIR.
If we want to protect users from such attacks by default, neither value
will suffice - "all" provides no protection, but "explicit" is
impractical for bare repository users. A more usable default would be to
allow only non-embedded bare repositories ([2] contains one such
proposal), but detecting if a repository is embedded is potentially
non-trivial, so this work is not implemented in this series.
[1]: https://lore.kernel.org/git/kl6lsfqpygsj.fsf@chooglen-macbookpro.roam.corp.google.com
[2]: https://lore.kernel.org/git/5b969c5e-e802-c447-ad25-6acc0b784582@github.com
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use git_protected_config() to read `safe.directory` instead of
read_very_early_config(), making it 'protected configuration only'.
As a result, `safe.directory` now respects "-c", so update the tests and
docs accordingly. It used to ignore "-c" due to how it was implemented,
not because of security or correctness concerns [1].
[1] https://lore.kernel.org/git/xmqqlevabcsu.fsf@gitster.g/
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Typofix in a BUG() message.
* cr/setup-bug-typo:
setup: fix function name in a BUG() message
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.35:
Git 2.35.4
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
|
|
* maint-2.34:
Git 2.34.4
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
|
|
* maint-2.32:
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
|
|
* maint-2.31:
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
|
|
8959555cee7 (setup_git_directory(): add an owner check for the top-level
directory, 2022-03-02), adds a function to check for ownership of
repositories using a directory that is representative of it, and ways to
add exempt a specific repository from said check if needed, but that
check didn't account for owership of the gitdir, or (when used) the
gitfile that points to that gitdir.
An attacker could create a git repository in a directory that they can
write into but that is owned by the victim to work around the fix that
was introduced with CVE-2022-24765 to potentially run code as the
victim.
An example that could result in privilege escalation to root in *NIX would
be to set a repository in a shared tmp directory by doing (for example):
$ git -C /tmp init
To avoid that, extend the ensure_valid_ownership function to be able to
check for all three paths.
This will have the side effect of tripling the number of stat() calls
when a repository is detected, but the effect is expected to be likely
minimal, as it is done only once during the directory walk in which Git
looks for a repository.
Additionally make sure to resolve the gitfile (if one was used) to find
the relevant gitdir for checking.
While at it change the message printed on failure so it is clear we are
referring to the repository by its worktree (or gitdir if it is bare) and
not to a specific directory.
Helped-by: Junio C Hamano <junio@pobox.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
|
|
The reference given to users when the result of
setup_git_directory_gently_1() is unexpected is incorrect.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prior to Git 2.35.0, git could be run from an inaccessible working
directory so long as the git repository specified by options and/or
environment variables was accessible. For example:
git init repo
mkdir -p a/b
cd a/b
chmod u-x ..
git -C "${PWD%/a/b}/repo" status
If this example seems a bit contrived, consider running with the
repository owner as a substitute UID (e.g. with runuser(1) or sudo(8))
without ensuring the working directory is accessible by that user.
The code added by e6f8861bd4 ("setup: introduce
startup_info->original_cwd") to preserve the working directory attempts
to normalize the path using strbuf_realpath(). If that fails, as in the
case above, it is treated as a fatal error.
This commit treats strbuf_realpath() errors as non-fatal. If an error
occurs, setup_original_cwd() will continue without applying removal
prevention for cwd, resulting in the pre-2.35.0 behavior. The risk
should be minimal, since git will not operate on a repository with
inaccessible ancestors, this behavior is only known to occur when cwd is
a descendant of the repository, an ancestor of cwd is inaccessible, and
no ancestors of the repository are inaccessible.
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
|
|
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the addition of the safe.directory in 8959555ce
(setup_git_directory(): add an owner check for the top-level directory,
2022-03-02) released in v2.35.2, we are receiving feedback from a
variety of users about the feature.
Some users have a very large list of shared repositories and find it
cumbersome to add this config for every one of them.
In a more difficult case, certain workflows involve running Git commands
within containers. The container boundary prevents any global or system
config from communicating `safe.directory` values from the host into the
container. Further, the container almost always runs as a different user
than the owner of the directory in the host.
To simplify the reactions necessary for these users, extend the
definition of the safe.directory config value to include a possible '*'
value. This value implies that all directories are safe, providing a
single setting to opt-out of this protection.
Note that an empty assignment of safe.directory clears all previous
values, and this is already the case with the "if (!value || !*value)"
condition.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It seems that nothing is ever checking to make sure the safe directories
in the configs actually have the key safe.directory, so some unrelated
config that has a value with a certain directory would also make it a
safe directory.
Signed-off-by: Matheus Valadares <me@m28.io>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is difficult to change the ownership on a directory in our test
suite, so insert a new GIT_TEST_ASSUME_DIFFERENT_OWNER environment
variable to trick Git into thinking we are in a differently-owned
directory. This allows us to test that the config is parsed correctly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
* maint-2.34:
Git 2.34.2
Git 2.33.2
Git 2.32.1
Git 2.31.2
GIT-VERSION-GEN: bump to v2.33.1
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
|
|
* maint-2.32:
Git 2.32.1
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
|
|
* maint-2.31:
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
|
|
It poses a security risk to search for a git directory outside of the
directories owned by the current user.
For example, it is common e.g. in computer pools of educational
institutes to have a "scratch" space: a mounted disk with plenty of
space that is regularly swiped where any authenticated user can create
a directory to do their work. Merely navigating to such a space with a
Git-enabled `PS1` when there is a maliciously-crafted `/scratch/.git/`
can lead to a compromised account.
The same holds true in multi-user setups running Windows, as `C:\` is
writable to every authenticated user by default.
To plug this vulnerability, we stop Git from accepting top-level
directories owned by someone other than the current user. We avoid
looking at the ownership of each and every directories between the
current and the top-level one (if there are any between) to avoid
introducing a performance bottleneck.
This new default behavior is obviously incompatible with the concept of
shared repositories, where we expect the top-level directory to be owned
by only one of its legitimate users. To re-enable that use case, we add
support for adding exceptions from the new default behavior via the
config setting `safe.directory`.
The `safe.directory` config setting is only respected in the system and
global configs, not from repository configs or via the command-line, and
can have multiple values to allow for multiple shared repositories.
We are particularly careful to provide a helpful message to any user
trying to use a shared repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
Use the same message when an invalid value is passed to a command line
option or a configuration variable.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Removing the current working directory causes all subsequent git
commands run from that directory to get confused and fail with a message
about being unable to read the current working directory:
$ git status
fatal: Unable to read current working directory: No such file or directory
Non-git commands likely have similar warnings or even errors, e.g.
$ bash -c 'echo hello'
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
hello
This confuses end users, particularly since the command they get the
error from is not the one that caused the problem; the problem came from
the side-effect of some previous command.
We would like to avoid removing the current working directory of our
parent process; towards this end, introduce a new variable,
startup_info->original_cwd, that tracks the current working directory
that we inherited from our parent process. For convenience of later
comparisons, we prefer that this new variable store a path relative to
the toplevel working directory (thus much like 'prefix'), except without
the trailing slash.
Subsequent commits will make use of this new variable.
Acked-by: Derrick Stolee <stolee@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace the catch-all error message with specific ones for opening and
duplicating by calling the wrappers xopen and xdup. The code becomes
easier to follow when error handling is reduced to two letters.
Remove the unnecessary mode parameter while at it -- we expect /dev/null
to already exist.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare the internals for lazily fetching objects in submodules
from their promisor remotes.
* jt/partial-clone-submodule-1:
promisor-remote: teach lazy-fetch in any repo
run-command: refactor subprocess env preparation
submodule: refrain from filtering GIT_CONFIG_COUNT
promisor-remote: support per-repository config
repository: move global r_f_p_c to repo struct
|
|
Move repository_format_partial_clone, which is currently a global
variable, into struct repository. (Full support for per-repository
partial clone config will be done in a subsequent commit - this is split
into its own commit because of the extent of the changes needed.)
The new repo-specific variable cannot be set in
check_repository_format_gently() (as is currently), because that
function does not know which repo it is operating on (or even whether
the value is important); therefore this responsibility is delegated to
the outermost caller that knows. Of all the outermost callers that know
(found by looking at all functions that call clear_repository_format()),
I looked at those that either read from the main Git directory or write
into a struct repository. These callers have been modified accordingly
(write to the_repository in the former case and write to the given
struct repository in the latter case).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's easier to translate this way.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "prefix" was precomposed for macOS in commit 5c327502 (MacOS:
precompose_argv_prefix(), 2021-02-03).
However, this commit forgot to update "startup_info->prefix" after
precomposing.
Move the (possible) precomposition towards the end of
setup_git_directory_gently(), so that precompose_string_if_needed()
can use git_config_get_bool("core.precomposeunicode") correctly.
Keep prefix, startup_info->prefix and GIT_PREFIX_ENVIRONMENT all in sync.
And as a result, the prefix no longer needs to be precomposed in git.c
Reported-by: Dmitry Torilov <d.torilov@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
|
|
With the base fix to 2.27 regresion, any new extensions in a v0
repository would still be silently honored, which is not quite
right. Instead, complain and die loudly.
* jk/reject-newer-extensions-in-v0:
verify_repository_format(): complain about new extensions in v0 repo
|
|
The transition plan specifies extensions.objectFormat as the indication
that we're using a given hash in a certain repo. Read this as one of
the extensions we support. If the user has specified an invalid value,
fail.
Ensure that we reject the extension if the repository format version is
0.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 2.28-rc0, we corrected a bug that some repository extensions are
honored by mistake even in a version 0 repositories (these
configuration variables in extensions.* namespace were supposed to
have special meaning in repositories whose version numbers are 1 or
higher), but this was a bit too big a change.
* jn/v0-with-extensions-fix:
repository: allow repository format upgrade with extensions
Revert "check_repository_format_gently(): refuse extensions for old repositories"
|
|
We made the mistake in the past of respecting extensions.* even when the
repository format version was set to 0. This is bad because forgetting
to bump the repository version means that older versions of Git (which
do not know about our extensions) won't complain. I.e., it's not a
problem in itself, but it means your repository is in a state which does
not give you the protection you think you're getting from older
versions.
For compatibility reasons, we are stuck with that decision for existing
extensions. However, we'd prefer not to extend the damage further. We
can do that by catching any newly-added extensions and complaining about
the repository format.
Note that this is a pretty heavy hammer: we'll refuse to work with the
repository at all. A lesser option would be to ignore (possibly with a
warning) any new extensions. But because of the way the extensions are
handled, that puts the burden on each new extension that is added to
remember to "undo" itself (because they are handled before we know
for sure whether we are in a v1 repo or not, since we don't insist on a
particular ordering of config entries).
So one option would be to rewrite that handling to record any new
extensions (and their values) during the config parse, and then only
after proceed to handle new ones only if we're in a v1 repository. But
I'm not sure if it's worth the trouble:
- ignoring extensions is likely to end up with broken results anyway
(e.g., ignoring a proposed objectformat extension means parsing any
object data is likely to encounter errors)
- this is a sign that whatever tool wrote the extension field is
broken. We may be better off notifying immediately and forcefully so
that such tools don't even appear to work accidentally.
The only downside is that fixing the situation is a little tricky,
because programs like "git config" won't want to work with the
repository. But:
git config --file=.git/config core.repositoryformatversion 1
should still suffice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we officially permit repository extensions in repository
format v0, permit upgrading a repository with extensions from v0 to v1
as well.
For example, this means a repository where the user has set
"extensions.preciousObjects" can use "git fetch --filter=blob:none
origin" to upgrade the repository to use v1 and the partial clone
extension.
To avoid mistakes, continue to forbid repository format upgrades in v0
repositories with an unrecognized extension. This way, a v0 user
using a misspelled extension field gets a chance to correct the
mistake before updating to the less forgiving v1 format.
While we're here, make the error message for failure to upgrade the
repository format a bit shorter, and present it as an error, not a
warning.
Reported-by: Huan Huan Chen <huanhuanchen@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
repositories"
This reverts commit 14c7fa269e42df4133edd9ae7763b678ed6594cd.
The core.repositoryFormatVersion field was introduced in ab9cb76f661
(Repository format version check., 2005-11-25), providing a welcome
bit of forward compatibility, thanks to some welcome analysis by
Martin Atukunda. The semantics are simple: a repository with
core.repositoryFormatVersion set to 0 should be comprehensible by all
Git implementations in active use; and Git implementations should
error out early instead of trying to act on Git repositories with
higher core.repositoryFormatVersion values representing new formats
that they do not understand.
A new repository format did not need to be defined until 00a09d57eb8
(introduce "extensions" form of core.repositoryformatversion,
2015-06-23). This provided a finer-grained extension mechanism for
Git repositories. In a repository with core.repositoryFormatVersion
set to 1, Git implementations can act on "extensions.*" settings that
modify how a repository is interpreted. In repository format version
1, unrecognized extensions settings cause Git to error out.
What happens if a user sets an extension setting but forgets to
increase the repository format version to 1? The extension settings
were still recognized in that case; worse, unrecognized extensions
settings do *not* cause Git to error out. So combining repository
format version 0 with extensions settings produces in some sense the
worst of both worlds.
To improve that situation, since 14c7fa269e4
(check_repository_format_gently(): refuse extensions for old
repositories, 2020-06-05) Git instead ignores extensions in v0 mode.
This way, v0 repositories get the historical (pre-2015) behavior and
maintain compatibility with Git implementations that do not know about
the v1 format. Unfortunately, users had been using this sort of
configuration and this behavior change came to many as a surprise:
- users of "git config --worktree" that had followed its advice
to enable extensions.worktreeConfig (without also increasing the
repository format version) would find their worktree configuration
no longer taking effect
- tools such as copybara[*] that had set extensions.partialClone in
existing repositories (without also increasing the repository format
version) would find that setting no longer taking effect
The behavior introduced in 14c7fa269e4 might be a good behavior if we
were traveling back in time to 2015, but we're far too late. For some
reason I thought that it was what had been originally implemented and
that it had regressed. Apologies for not doing my research when
14c7fa269e4 was under development.
Let's return to the behavior we've had since 2015: always act on
extensions.* settings, regardless of repository format version. While
we're here, include some tests to describe the effect on the "upgrade
repository version" code path.
[*] https://github.com/google/copybara/commit/ca76c0b1e13c4e36448d12c2aba4a5d9d98fb6e7
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
|
|
Previously, extensions were recognized regardless of repository format
version. If the user sets an undefined "extensions" value on a
repository of version 0 and that value is used by a future git version,
they might get an undesired result.
Because all extensions now also upgrade repository versions, tightening
the check would help avoid this for future extensions.
Signed-off-by: Xin Li <delphij@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In version 1 of repository format, "extensions" gained special meaning
and it is safer to avoid upgrading when there are pre-existing
extensions.
Make list-objects-filter to use the helper function instead of setting
repository version directly as a prerequisite of exposing the upgrade
capability.
Signed-off-by: Xin Li <delphij@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we're checking the repository's format, set the hash algorithm at
the same time. This ensures that we perform a suitable initialization
early enough to avoid confusing any parts of the code. If we defer
until later, we can end up with portions of the code which are confused
about the hash algorithm, resulting in segfaults when working with
SHA-256 repositories.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 transition continues.
* bc/sha-256-part-1-of-4: (22 commits)
fast-import: add options for rewriting submodules
fast-import: add a generic function to iterate over marks
fast-import: make find_marks work on any mark set
fast-import: add helper function for inserting mark object entries
fast-import: permit reading multiple marks files
commit: use expected signature header for SHA-256
worktree: allow repository version 1
init-db: move writing repo version into a function
builtin/init-db: add environment variable for new repo hash
builtin/init-db: allow specifying hash algorithm on command line
setup: allow check_repository_format to read repository format
t/helper: make repository tests hash independent
t/helper: initialize repository if necessary
t/helper/test-dump-split-index: initialize git repository
t6300: make hash algorithm independent
t6300: abstract away SHA-1-specific constants
t: use hash-specific lookup tables to define test constants
repository: require a build flag to use SHA-256
hex: add functions to parse hex object IDs in any algorithm
hex: introduce parsing variants taking hash algorithms
...
|
|
The real_path() convenience function can easily be misused; with a
bit of code refactoring in the callers' side, its use has been
eliminated.
* am/real-path-fix:
get_superproject_working_tree(): return strbuf
real_path_if_valid(): remove unsafe API
real_path: remove unsafe API
set_git_dir: fix crash when used with real_path()
|
|
An earlier update to show the location of working tree in the error
message did not consider the possibility that a git command may be
run in a bare repository, which has been corrected.
* es/outside-repo-errmsg-hints:
prefix_path: show gitdir if worktree unavailable
|
|
If there is no worktree at present, we can still hint the user about
Git's current directory by showing them the absolute path to the Git
directory. Even though the Git directory doesn't make it as easy to
locate the worktree in question, it can still help a user figure out
what's going on while developing a script.
This fixes a segmentation fault introduced in e0020b2f
("prefix_path: show gitdir when arg is outside repo", 2020-02-14).
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
[jc: added minimum tests, with help from Szeder Gábor]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit continues the work started with previous commit.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Returning a shared buffer invites very subtle bugs due to reentrancy or
multi-threading, as demonstrated by the previous patch.
There was an unfinished effort to abolish this [1].
Let's finally rid of `real_path()`, using `strbuf_realpath()` instead.
This patch uses a local `strbuf` for most places where `real_path()` was
previously called.
However, two places return the value of `real_path()` to the caller. For
them, a `static` local `strbuf` was added, effectively pushing the
problem one level higher:
read_gitfile_gently()
get_superproject_working_tree()
[1] https://lore.kernel.org/git/1480964316-99305-1-git-send-email-bmwill@google.com/
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`real_path()` returns result from a shared buffer, inviting subtle
reentrance bugs. One of these bugs occur when invoked this way:
set_git_dir(real_path(git_dir))
In this case, `real_path()` has reentrance:
real_path
read_gitfile_gently
repo_set_gitdir
setup_git_env
set_git_dir_1
set_git_dir
Later, `set_git_dir()` uses its now-dead parameter:
!is_absolute_path(path)
Fix this by using a dedicated `strbuf` to hold `strbuf_realpath()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, we will want to not only check the repository format, but
extract the information that we've gained. To do so, allow
check_repository_format to take a pointer to struct repository_format.
Allow passing NULL for this argument if we're not interested in the
information, and pass NULL for all existing callers. A future patch
will make use of this information.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error message clarification.
* es/outside-repo-errmsg-hints:
prefix_path: show gitdir when arg is outside repo
|
|
When developing a script, it can be painful to understand why Git thinks
something is outside the current repo, if the current repo isn't what
the user thinks it is. Since this can be tricky to diagnose, especially
in cases like submodules or nested worktrees, let's give the user a hint
about which repository is offended about that path.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 28fcc0b71a (pathspec: avoid the need of "--" when wildcard is
used, 2015-05-02) allowed:
git rev-parse '*.c'
without the double-dash. But the rule it uses to check for wildcards
actually looks for any glob special. This is overly liberal, as it means
that a pattern that doesn't actually do any wildcard matching, like
"a\b", will be considered a pathspec.
If you do have such a file on disk, that's presumably what you wanted.
But if you don't, the results are confusing: rather than say "there's no
such path a\b", we'll quietly accept it as a pathspec which very likely
matches nothing (or at least not what you intended). Likewise, looking
for path "a\*b" doesn't expand the search at all; it would only find a
single entry, "a*b".
This commit switches the rule to trigger only when glob metacharacters
would expand the search, meaning both of those cases will now report an
error (you can still disambiguate using "--", of course; we're just
tightening the DWIM heuristic).
Note that we didn't test the original feature in 28fcc0b71a at all. So
this patch not only tests for these corner cases, but also adds a
regression test for the existing behavior.
Reported-by: David Burström <davidburstrom@spotify.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, the root level of UNC share is now allowed to be used
just like any other directory.
* js/gitdir-at-unc-root:
setup_git_directory(): handle UNC root paths correctly
Fix .git/ discovery at the root of UNC shares
setup_git_directory(): handle UNC paths correctly
|
|
When working in the root directory of a file share (this is only
possible in Git Bash and Powershell, but not in CMD), the current
directory is reported without a trailing slash.
This is different from Unix and standard Windows directories: both / and
C:\ are reported with a trailing slash as current directories.
If a Git worktree is located there, Git is not quite prepared for that:
while it does manage to find the .git directory/file, it returns as
length of the top-level directory's path *one more* than the length of
the current directory, and setup_git_directory_gently() would then
return an undefined string as prefix.
In practice, this undefined string usually points to NUL bytes, and does
not cause much harm. Under rare circumstances that are really involved
to reproduce (and not reliably so), the reported prefix could be a
suffix string of Git's exec path, though.
A careful analysis determined that this bug is unlikely to be
exploitable, therefore we mark this as a regular bug fix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A very common assumption in Git's source code base is that
offset_1st_component() returns either 0 for relative paths, or 1 for
absolute paths that start with a slash. In other words, the return value
is either 0 or points just after the dir separator.
This assumption is not fulfilled when calling offset_1st_component()
e.g. on UNC paths on Windows, e.g. "//my-server/my-share". In this case,
offset_1st_component() returns the length of the entire string (which is
correct, because stripping the last "component" would not result in a
valid directory), yet the return value still does not point just after a
dir separator.
This assumption is most prominently seen in the
setup_git_directory_gently_1() function, where we want to append a
".git" component and simply assume that there is already a dir
separator. In the UNC example given above, this assumption is incorrect.
As a consequence, Git will fail to handle a worktree at the top of a UNC
share correctly.
Let's fix this by adding a dir separator specifically for that case: we
found that there is no first component in the path and it does not end
in a dir separator? Then add it.
This fixes https://github.com/git-for-windows/git/issues/1320
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first offset in a UNC path is not the host name, but the folder name after that.
This fixes https://github.com/git-for-windows/git/issues/1181
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have has_promisor_remote() and can use many
promisor remotes, let's hide repository_format_partial_clone
as a static in promisor-remote.c to avoid it being use
for anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The setup code has been cleaned up to avoid leaks around the
repository_format structure.
* ma/clear-repository-format:
setup: fix memory leaks with `struct repository_format`
setup: free old value before setting `work_tree`
|
|
After we set up a `struct repository_format`, it owns various pieces of
allocated memory. We then either use those members, because we decide we
want to use the "candidate" repository format, or we discard the
candidate / scratch space. In the first case, we transfer ownership of
the memory to a few global variables. In the latter case, we just
silently drop the struct and end up leaking memory.
Introduce an initialization macro `REPOSITORY_FORMAT_INIT` and a
function `clear_repository_format()`, to be used on each side of
`read_repository_format()`. To have a clear and simple memory ownership,
let all users of `struct repository_format` duplicate the strings that
they take from it, rather than stealing the pointers.
Call `clear_...()` at the start of `read_...()` instead of just zeroing
the struct, since we sometimes enter the function multiple times. Thus,
it is important to initialize the struct before calling `read_...()`, so
document that. It's also important because we might not even call
`read_...()` before we call `clear_...()`, see, e.g., builtin/init-db.c.
Teach `read_...()` to clear the struct on error, so that it is reset to
a safe state, and document this. (In `setup_git_directory_gently()`, we
look at `repo_fmt.hash_algo` even if `repo_fmt.version` is -1, which we
weren't actually supposed to do per the API. After this commit, that's
ok.)
We inherit the existing code's combining "error" and "no version found".
Both are signalled through `version == -1` and now both cause us to
clear any partial configuration we have picked up. For "extensions.*",
that's fine, since they require a positive version number. For
"core.bare" and "core.worktree", we're already verifying that we have a
non-negative version number before using them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On a case-insensitive filesystem, we failed to compare the part of
the path that is above the worktree directory in an absolute
pathname, which has been corrected.
* js/abspath-part-inside-repo:
abspath_part_inside_repo: respect core.ignoreCase
|
|
Before assigning to `data->work_tree` in `read_worktree_config()`, free
any value we might already have picked up, so that we do not leak it.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the file system is case-insensitive, we really must be careful to
ignore differences in case only.
This fixes https://github.com/git-for-windows/git/issues/735
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
setup_git_directory_gently() expects two types of failures to
discover a git directory (e.g. .git/):
- GIT_DIR_HIT_CEILING: could not find a git directory in any
parent directories of the cwd.
- GIT_DIR_HIT_MOUNT_POINT: could not find a git directory in
any parent directories up to the mount point of the cwd.
Both cases are handled in a similar way, but there are misleading
and unimportant differences. In both cases, setup_git_directory_gently()
should:
- Die if we are not in a git repository. Otherwise:
- Set nongit_ok = 1, indicating that we are not in a git repository
but this is ok.
- Call strbuf_release() on any non-static struct strbufs that we
allocated.
Before this change are two misleading additional behaviors:
- GIT_DIR_HIT_CEILING: setup_nongit() changes to the cwd for no
apparent reason. We never had the chance to change directories
up to this point so chdir(current cwd) is pointless.
- GIT_DIR_HIT_MOUNT_POINT: strbuf_release() frees the buffer
of a static struct strbuf (cwd). This is unnecessary because the
struct is static so its buffer is always reachable. This is also
misleading because nowhere else in the function is this buffer
released.
This change eliminates these two misleading additional behaviors and
deletes setup_nogit() because the code is clearer without it. The
result is that we can see clearly that GIT_DIR_HIT_CEILING and
GIT_DIR_HIT_MOUNT_POINT lead to the same behavior (ignoring the
different help messages).
During review, this change was amended to additionally include:
- Neither GIT_DIR_HIT_CEILING nor GIT_DIR_HIT_MOUNT_POINT may
return early from setup_git_directory_gently() before the
GIT_PREFIX environment variable is reset. Change both cases to
break instead of return. See GIT_PREFIX below for more details.
- GIT_DIR_NONE: setup_git_directory_gently_1() never returns this
value, but if it ever did, setup_git_directory_gently() would
incorrectly record that it had found a repository. Explicitly
BUG on this case because it is underspecified.
- GIT_PREFIX: this environment variable must always match the
value of startup_info->prefix and the prefix returned from
setup_git_directory_gently(). Make how we handle this slightly
more repetitive but also more clear.
- setup_git_env() and repo_set_hash_algo(): Add comments showing
that only GIT_DIR_EXPLICIT, GIT_DIR_DISCOVERED, and GIT_DIR_BARE
will cause setup_git_directory_gently() to call these setup
functions. This was obvious (but partly incorrect) before this
change when GIT_DIR_HIT_MOUNT_POINT returned early from
setup_git_directory_gently().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new repo extension is added, worktreeConfig. When it is present:
- Repository config reading by default includes $GIT_DIR/config _and_
$GIT_DIR/config.worktree. "config" file remains shared in multiple
worktree setup.
- The special treatment for core.bare and core.worktree, to stay
effective only in main worktree, is gone. These config settings are
supposed to be in config.worktree.
This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).
This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).
"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes still go to "config", not "config.worktree". A
new option --worktree is added for that (*).
Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".
This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.
(*) "git config --worktree" points back to "config" file when this
extension is not present and there is only one worktree so that it
works in any both single and multiple worktree setups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In d8193743e08 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae55
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some codepaths, including the refs API, get and keep relative
paths, that go out of sync when the process does chdir(2). The
chdir-notify API is introduced to let these codepaths adjust these
cached paths to the new current directory.
* jk/relative-directory-fix:
refs: use chdir_notify to update cached relative paths
set_work_tree: use chdir_notify
add chdir-notify API
trace.c: export trace_setup_key
set_git_dir: die when setenv() fails
|
|
Code clean-up for the "repository" abstraction.
* nd/remove-ignore-env-field:
repository.h: add comment and clarify repo_set_gitdir
repository: delete ignore_env member
sha1_file.c: move delayed getenv(altdb) back to setup_git_env()
repository.c: delete dead functions
repository.c: move env-related setup code back to environment.c
repository: initialize the_repository in main()
|
|
When we change to the top of the working tree, we manually
re-adjust $GIT_DIR and call set_git_dir() again, in order to
update any relative git-dir we'd compute earlier.
Instead of the work-tree code having to know to call the
git-dir code, let's use the new chdir_notify interface.
There are two spots that need updating, with a few
subtleties in each:
1. the set_git_dir() code needs to chdir_notify_register()
so it can be told when to update its path.
Technically we could push this down into repo_set_gitdir(),
so that even repository structs besides the_repository
could benefit from this. But that opens up a lot of
complications:
- we'd still need to touch set_git_dir(), because it
does some other setup (like setting $GIT_DIR in the
environment)
- submodules using other repository structs get
cleaned up, which means we'd need to remove them
from the chdir_notify list
- it's unlikely to fix any bugs, since we shouldn't
generally chdir() in the middle of working on a
submodule
2. setup_work_tree now needs to call chdir_notify(), and
can lose its manual set_git_dir() call.
Note that at first glance it looks like this undoes the
absolute-to-relative optimization added by 044bbbcb63
(Make git_dir a path relative to work_tree in
setup_work_tree(), 2008-06-19). But for the most part
that optimization was just _undoing_ the
relative-to-absolute conversion which the function was
doing earlier (and which is now gone).
It is true that if you already have an absolute git_dir
that the setup_work_tree() function will no longer make
it relative as a side effect. But:
- we generally do have relative git-dir's due to the
way the discovery code works
- if we really care about making git-dir's relative
when possible, then we should be relativizing them
earlier (e.g., when we see an absolute $GIT_DIR we
could turn it relative, whether we are going to
chdir into a worktree or not). That would cover all
cases, including ones that 044bbbcb63 did not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It does not make sense that generic repository code contains handling
of environment variables, which are specific for the main repository
only. Refactor repo_set_gitdir() function to take $GIT_DIR and
optionally _all_ other customizable paths. These optional paths can be
NULL and will be calculated according to the default directory layout.
Note that some dead functions are left behind to reduce diff
noise. They will be deleted in the next patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some messages in low level start-up codepath have been i18n-ized.
* as/ll-i18n:
Mark messages for translations
|
|
In preparation for implementing narrow/partial clone, the machinery
for checking object connectivity used by gc and fsck has been
taught that a missing object is OK when it is referenced by a
packfile specially marked as coming from trusted repository that
promises to make them available on-demand and lazily.
* jh/fsck-promisors:
gc: do not repack promisor packfiles
rev-list: support termination at promisor objects
sha1_file: support lazily fetching missing objects
introduce fetch-object: fetch one promisor object
index-pack: refactor writing of .keep files
fsck: support promisor objects as CLI argument
fsck: support referenced promisor objects
fsck: support refs pointing to promisor objects
fsck: introduce partialclone extension
extension.partialclone: introduce partial clone extension
|
|
Small changes in messages to fit the style and typography of rest.
Reuse already translated messages if possible.
Do not translate messages aimed at developers of git.
Fix unit tests depending on the original string.
Use `test_i18ngrep` for tests with translatable strings.
Change and verify rest of tests via `make GETTEXT_POISON=1 test`.
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Comment update.
* sg/setup-doc-update:
setup.c: fix comment about order of .git directory discovery
|
|
Since gitfiles were introduced in b44ebb19e (Add platform-independent
.git "symlink", 2008-02-20) the order of checks during .git directory
discovery is: gitfile, gitdir, bare repo. However, that commit did
only partially update the in-code comment describing this order,
missing the last line which still puts gitdir before gitfile.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce new repository extension option:
`extensions.partialclone`
See the update to Documentation/technical/repository-version.txt
in this patch for more information.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In future versions of Git, we plan to support an additional hash
algorithm. Integrate the enumeration of hash algorithms with repository
setup, and store a pointer to the enumerated data in struct repository.
Of course, we currently only support SHA-1, so hard-code this value in
read_repository_format. In the future, we'll enumerate this value from
the configuration.
Add a constant, the_hash_algo, which points to the hash_algo structure
pointer in the repository global. Note that this is the hash which is
used to serialize data to disk, not the hash which is used to display
items to the user. The transition plan anticipates that these may be
different. We can add an additional element in the future (say,
ui_hash_algo) to provide for this case.
Include repository.h in cache.h since we now need to have access to
these struct and variable definitions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We enumerate several different items as part of struct
repository_format, but then actually set up those values using the
global variables we've initialized from them. Instead, let's pass a
pointer to the structure down to the code where we enumerate these
values, so we can later on use those values directly to perform setup.
This technique makes it easier for us to determine additional items
about the repository format (such as the hash algorithm) and then use
them for setup later on, without needing to add additional global
variables. We can't avoid using the existing global variables since
they're intricately intertwined with how things work at the moment, but
this improves things for the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct start-up sequence so that a repository could be placed
immediately under the root directory again (which was broken at
around Git 2.13).
* js/early-config:
setup: avoid double slashes when looking for HEAD
|
|
Andrew Baumann reported that when called outside of any Git worktree,
`git rev-parse --is-inside-work-tree` eventually tries to access
`//HEAD`, i.e. any `HEAD` file in the root directory, but with a double
slash.
This double slash is not only unintentional, but is allowed by the POSIX
standard to have a special meaning. And most notably on Windows, it
does, where it refers to a UNC path of the form `//server/share/`.
As a consequence, afore-mentioned `rev-parse` call not only looks for
the wrong thing, but it also causes serious delays, as Windows will try
to access a server called `HEAD`. Let's simply avoid the unintended
double slash.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error message tweak.
* ks/verify-filename-non-option-error-message-tweak:
setup: update error message to be more meaningful
|
|
The error message shown when a flag is found when expecting a
filename wasn't clear as it didn't communicate what was wrong
using the 'suitable' words in *all* cases.
$ git ls-files
README.md
test-file
Correct case,
$ git rev-parse README.md --flags
README.md
--flags
fatal: bad flag '--flags' used after filename
Incorrect case,
$ git grep "some random regex" -n
fatal: bad flag '-n' used after filename
The above case is incorrect as "some random regex" isn't a filename
in this case.
Change the error message to be general and communicative. This results
in the following output,
$ git rev-parse README.md --flags
README.md
--flags
fatal: option '--flags' must come before non-option arguments
$ git grep "some random regex" -n
fatal: option '-n' must come before non-option arguments
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ideally we'd free the existing gitdir field before assigning
the new one, to avoid a memory leak. But we can't do so
safely because some callers do the equivalent of:
set_git_dir(get_git_dir());
We can detect that case as a noop, but there are even more
complicated cases like:
set_git_dir(remove_leading_path(worktree, get_git_dir());
where we really do need to do some work, but the original
string must remain valid.
Rather than put the burden on callers to make a copy of the
string (only to free it later, since we'll make a copy of it
ourselves), let's solve the problem inside set_git_dir(). We
can make a copy of the pointer for the old gitdir, and then
avoid freeing it until after we've made our new copy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert grep to use 'struct repository' which enables recursing into
submodules to be handled in-process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Migrate 'git_dir', 'git_common_dir', 'git_object_dir', 'git_index_file',
'git_graft_file', and 'namespace' to be stored in 'the_repository'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'GIT_TOPLEVEL_PREFIX_ENVIRONMENT' was added in (b58a68c1c setup: allow
for prefix to be passed to git commands) to aid in fixing a bug where
'ls-files' and 'grep' were not able to properly recurse when called from
within a subdirectory. Add a 'NEEDSWORK' comment indicating that this
envvar should be removed once 'ls-files' and 'grep' can recurse
in-process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Under some circumstances (bogus GIT_DIR value or the discovered gitdir
is '.git') 'setup_git_directory()' won't initialize key repository
state. This leads to inconsistent state after running the setup code.
To account for this inconsistent state, lazy initialization is done once
a caller asks for the repository's gitdir or some other piece of
repository state. This is confusing and can be error prone.
Instead let's tighten the expected outcome of 'setup_git_directory()'
and ensure that it initializes repository state in all cases that would
have been handled by lazy initialization.
This also lets us drop the requirement to have 'have_git_dir()' check if
the environment variable GIT_DIR was set as that will be handled by the
end of the setup code.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
bw/repo-object
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
|
|
The convention for a command line is to follow "git cmdname
--options" with revisions followed by an optional "--"
disambiguator and then finally pathspecs. When "--" is not there,
we make sure early ones are all interpretable as revs (and do not
look like paths) and later ones are the other way around. A
pathspec with "magic" (e.g. ":/p/a/t/h" that matches p/a/t/h from
the top-level of the working tree, no matter what subdirectory you
are working from) are conservatively judged as "not a path", which
required disambiguation more often. The command line parser
learned to say "it's a pathspec" a bit more often when the syntax
looks like so.
* jk/pathspec-magic-disambiguation:
verify_filename(): flip order of checks
verify_filename(): treat ":(magic)" as a pathspec
check_filename(): handle ":^" path magic
check_filename(): use skip_prefix
check_filename(): refactor ":/" handling
t4208: add check for ":/" without matching file
|
|
Currently 'discover_git_directory' only looks at the gitdir to determine
if a git directory was discovered. This causes a problem in the event
that the gitdir which was discovered was in fact a per-worktree git
directory and not the common git directory. This is because the
repository config, which is checked to verify the repository's format,
is stored in the commondir and not in the per-worktree gitdir. Correct
this behavior by checking the config stored in the commondir.
It will also be of use for callers to have access to the commondir, so
lets also return that upon successfully discovering a git directory.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When discovering a .git/ directory, we take pains to ensure that its
repository format version matches Git's expectations, and we return NULL
otherwise.
However, we still appended the invalid path to the strbuf passed as
argument.
Let's just reset the strbuf to the state before we appended the .git/
directory that was eventually rejected.
There is another early return path in that function, when
setup_git_directory_gently_1() returns GIT_DIR_NONE or an error. In that
case, the gitdir parameter has not been touched, therefore there is no
need for an equivalent change in that code path.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our code often opens a path to an optional file, to work on its
contents when we can successfully open it. We can ignore a failure
to open if such an optional file does not exist, but we do want to
report a failure in opening for other reasons (e.g. we got an I/O
error, or the file is there, but we lack the permission to open).
The exact errors we need to ignore are ENOENT (obviously) and
ENOTDIR (less obvious). Instead of repeating comparison of errno
with these two constants, introduce a helper function to do so.
* jc/noent-notdir:
treewide: use is_missing_file_error() where ENOENT and ENOTDIR are checked
compat-util: is_missing_file_error()
|
|
Using the is_missing_file_error() helper introduced in the previous
step, update all hits from
$ git grep -e ENOENT --and -e ENOTDIR
There are codepaths that only check ENOENT, and it is possible that
some of them should be checking both. Updating them is kept out of
this step deliberately, as we do not want to change behaviour in this
step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The looks_like_pathspec() check is much cheaper than
check_filename(), which actually stats the file. Since
either is sufficient for our return value, we should do the
cheaper one first, potentially short-circuiting the other.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For commands that take revisions and pathspecs, magic
pathspecs like ":(exclude)foo" require the user to specify
a disambiguating "--", since they do not match a file in the
filesystem, like:
git grep foo -- :(exclude)bar
This makes them more annoying to use than they need to be.
We loosened the rules for wildcards in 28fcc0b71 (pathspec:
avoid the need of "--" when wildcard is used, 2015-05-02).
Let's do the same for pathspecs with long-form magic.
We already handle the short-forms ":/" and ":^" specially in
check_filename(), so we don't need to handle them here. And
in fact, we could do the same with long-form magic, parsing
out the actual filename and making sure it exists. But there
are a few reasons not to do it that way:
- the parsing gets much more complicated, and we'd want to
hand it off to the pathspec code. But that code isn't
ready to do this kind of speculative parsing (it's happy
to die() when it sees a syntactically invalid pathspec).
- not all pathspec magic maps to a filesystem path. E.g.,
:(attr) should be treated as a pathspec regardless of
what is in the filesystem
- we can be a bit looser with ":(" than with the
short-form ":/", because it is much less likely to have
a false positive. Whereas ":/" also means "search for a
commit with this regex".
Note that because the change is in verify_filename() and not
in its helper check_filename(), this doesn't affect the
verify_non_filename() case. I.e., if an item that matches
our new rule doesn't resolve as an object, we may fallback
to treating it as a pathspec (rather than complaining it
doesn't exist). But if it does resolve (e.g., as a file in
the index that starts with an open-paren), we won't then
complain that it's also a valid pathspec. This matches the
wildcard-exception behavior.
And of course in either case, one can always insert the "--"
to get more precise results.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We special-case "git log :/foo" to work when "foo" exists in
the working tree. But :^ (and its alias :!) do not get the
same treatment, requiring the user to supply a
disambiguating "--". Let's make them work without requiring
the user to type the "--".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This avoids some magic numbers (and we'll be adding more
similar calls in a minute).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We handle arguments with the ":/" pathspec magic specially,
making sure the name exists at the top-level. We'll want to
handle more pathspec magic in future patches, so let's do a
little rearranging to make that easier.
Instead of relying on an if/else cascade to avoid the
prefix_filename() call, we'll just set prefix to NULL.
Likewise, we'll get rid of the "name" variable entirely, and
just push the "arg" pointer forward to skip past the magic.
That means by the time we get to the prefix-handling, we're
set up appropriately whether we saw ":/" or not.
Note that this does impact the final error message we
produce when stat() fails, as it shows "arg" (which we'll
have modified to skip magic and include the prefix). This is
a good thing; the original message would say something like
"failed to stat ':/foo'", which is confusing (we tried to
stat "foo").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The setup_explicit_git_dir() function does not take custody of the string
passed as first parameter; we have to release it if we turned the value of
git_dir into an absolute path.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Coverity reported a memory leak in this function. However, it can only
be called once, as setup_git_directory() changes global state and hence
is not reentrant.
Mark the variable as static to indicate that this is a singleton.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few commands that recently learned the "--recurse-submodule"
option misbehaved when started from a subdirectory of the
superproject.
* bw/recurse-submodules-relative-fix:
ls-files: fix bug when recursing with relative pathspec
ls-files: fix typo in variable name
grep: fix bug when recursing with relative pathspec
setup: allow for prefix to be passed to git commands
grep: fix help text typo
|
|
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
|
|
The prefix_filename() function returns a pointer to static
storage, which makes it easy to use dangerously. We already
fixed one buggy caller in hash-object recently, and the
calls in apply.c are suspicious (I didn't dig in enough to
confirm that there is a bug, but we call the function once
in apply_all_patches() and then again indirectly from
parse_chunk()).
Let's make it harder to get wrong by allocating the return
value. For simplicity, we'll do this even when the prefix is
empty (and we could just return the original file pointer).
That will cause us to allocate sometimes when we wouldn't
otherwise need to, but this function isn't called in
performance critical code-paths (and it already _might_
allocate on any given call, so a caller that cares about
performance is questionable anyway).
The downside is that the callers need to remember to free()
the result to avoid leaking. Most of them already used
xstrdup() on the result, so we know they are OK. The
remainder have been converted to use free() as appropriate.
I considered retaining a prefix_filename_unsafe() for cases
where we know the static lifetime is OK (and handling the
cleanup is awkward). This is only a handful of cases,
though, and it's not worth the mental energy in worrying
about whether the "unsafe" variant is OK to use in any
situation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function takes the prefix as a ptr/len pair, but in
every caller the length is exactly strlen(ptr). Let's
simplify the interface and just take the string. This saves
callers specifying it (and in some cases handling a NULL
prefix).
In a handful of cases we had the length already without
calling strlen, so this is technically slower. But it's not
likely to matter (after all, if the prefix is non-empty
we'll allocate and copy it into a buffer anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The start-up sequence of "git" needs to figure out some configured
settings before it finds and set itself up in the location of the
repository and was quite messy due to its "chicken-and-egg" nature.
The code has been restructured.
* js/early-config:
setup.c: mention unresolved problems
t1309: document cases where we would want early config not to die()
setup_git_directory_gently_1(): avoid die()ing
t1309: test read_early_config()
read_early_config(): really discover .git/
read_early_config(): avoid .git/config hack when unneeded
setup: make read_early_config() reusable
setup: introduce the discover_git_directory() function
setup_git_directory_1(): avoid changing global state
setup: prepare setup_discovered_git_dir() for the root directory
setup_git_directory(): use is_dir_sep() helper
t7006: replace dubious test
|
|
In a future patch child processes which act on submodules need a little
more context about the original command that was invoked. This patch
teaches git to use the prefix stored in `GIT_INTERNAL_TOPLEVEL_PREFIX`
instead of the prefix that was potentally found during the git directory
setup process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During the review of the `early-config` patch series, two issues
have been identified that have been with us forever. Mark the
identified problems for later so that we do not forget them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function now has a new caller in addition to setup_git_directory():
the newly introduced discover_git_directory(). That function wants to
discover the current .git/ directory, and in case of a corrupted one
simply pretend that there is none to be found.
Example: if a stale .git file exists in the parent directory, and the
user calls `git -p init`, we want Git to simply *not* read any
repository config for the pager (instead of aborting with a message that
the .git file is corrupt).
Let's actually pretend that there was no GIT_DIR to be found in that case
when being called from discover_git_directory(), but keep the previous
behavior (i.e. to die()) for the setup_git_directory() case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We modified the setup_git_directory_gently_1() function earlier to make
it possible to discover the GIT_DIR without changing global state.
However, it is still a bit cumbersome to use if you only need to figure
out the (possibly absolute) path of the .git/ directory. Let's just
provide a convenient wrapper function with an easier signature that
*just* discovers the .git/ directory.
We will use it in a subsequent patch to fix the early config.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For historical reasons, Git searches for the .git/ directory (or the
.git file) by changing the working directory successively to the parent
directory of the current directory, until either anything was found or
until a ceiling or a mount point is hit.
Further global state may be changed in case a .git/ directory was found.
We do have a use case, though, where we would like to find the .git/
directory without having any global state touched, though: when we read
the early config e.g. for the pager or for alias expansion.
Let's just move all of code that changes any global state out of the
function `setup_git_directory_gently_1()` into
`setup_git_directory_gently()`.
In subsequent patches, we will use the _1() function in a new
`discover_git_directory()` function that we will then use for the early
config code.
Note: the new loop is a *little* tricky, as we have to handle the root
directory specially: we cannot simply strip away the last component
including the slash, as the root directory only has that slash. To remedy
that, we introduce the `min_offset` variable that holds the minimal length
of an absolute path, and using that to special-case the root directory,
including an early exit before trying to find the parent of the root
directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, the offset parameter (indicating what part of the cwd
parameter corresponds to the current directory after discovering the
.git/ directory) is set to 0 when we are running in the root directory.
However, in the next patches we will avoid changing the current working
directory while searching for the .git/ directory, meaning that the
offset corresponding to the root directory will have to be 1 to reflect
that this directory is characterized by the path "/" (and not "").
So let's make sure that setup_discovered_git_directory() only tries to
append the trailing slash to non-root directories.
Note: the setup_bare_git_directory() does not need a corresponding
change, as it does not want to return a prefix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.
* js/realpath-pathdup-fix:
real_pathdup(): fix callsites that wanted it to die on error
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
|
|
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
|
|
In 4ac9006f832 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.
The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.
The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).
Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is okay in practice to test for forward slashes in the output of
getcwd(), because we go out of our way to convert backslashes to forward
slashes in getcwd()'s output on Windows.
Still, the correct way to test for a dir separator is by using the
helper function we introduced for that very purpose. It also serves as a
good documentation what the code tries to do (not "how").
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a function for appending the canonized absolute pathname of a given
path to a strbuf. It keeps the existing contents intact, as expected of
a function of the strbuf_add() family, while avoiding copying the result
if the given strbuf is empty. It's more consistent with the rest of the
strbuf API than strbuf_realpath(), which it's wrapping.
Also add a semantic patch demonstrating its intended usage and apply it
to the current tree. Using strbuf_add_real_path() instead of calling
strbuf_addstr() and real_path() avoids an extra copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a later patch we want to react to only a subset of errors, defaulting
the rest to die as usual. Separate the block that takes care of dying
into its own function so we have easy access to it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This follows a93bedada (setup: add gentle version of read_gitfile,
2015-06-09), and assumes the same reasoning. resolve_git_dir is unsuited
for speculative calls, so we want to use the gentle version to find out
about potential errors.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Migrate callers of real_path() who duplicate the retern value to use
real_pathdup or strbuf_realpath.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update tests that compare the strings newly marked for translation to
succeed when running under GETTEXT_POISON.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/xstrfmt-null-with-prec-0:
setup.c: do not feed NULL to "%.*s" even with precision 0
|
|
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
|
|
A recent update 75faa45a (replace trivial malloc + sprintf / strcpy
calls with xstrfmt, 2015-09-24) rewrote
prepare an empty buffer
if (len)
append the first len bytes of "prefix" to the buffer
append "path" to the buffer
that computed "path", optionally prefixed by "prefix", into
xstrfmt("%.*s%s", len, prefix, path);
However, passing a NULL pointer to the printf(3) family of functions
to format it with %s conversion, even with the precision set to 0,
i.e.
xstrfmt("%.*s", 0, NULL)
yields undefined results, at least on some platforms.
Avoid this problem by substituting prefix with "" when len==0, as
prefix can legally be NULL in that case. This would mimick the
intent of the original code better.
Reported-by: Tom G. Christensen <tgc@jupiterrise.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These messages are human-readable and should be translated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Nobody reads this anymore, and they're not likely to; the
interesting thing is whether or not we passed
check_repository_format(), and possibly the individual
"extension" variables.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once upon a time, check_repository_format_gently would parse
the config with a single callback, and that callback would
set up a bunch of global variables. But now that we have
separate workdirs, we have to be more careful. Commit
31e26eb (setup.c: support multi-checkout repo setup,
2014-11-30) introduced a reduced callback which omits some
values like core.worktree. In the "main" callback we call
the reduced one, and then add back in the missing variables.
Now that we have split the config-parsing from the munging
of the global variables, we can do it all with a single
callback, and keep all of the "are we in a separate workdir"
logic together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we want to know if we're in a git repository of
reasonable vintage, we can call check_repository_format_gently(),
which does three things:
1. Reads the config from the .git/config file.
2. Verifies that the version info we read is sane.
3. Writes some global variables based on this.
There are a few things we could improve here.
One is that steps 1 and 3 happen together. So if the
verification in step 2 fails, we still clobber the global
variables. This is especially bad if we go on to try another
repository directory; we may end up with a state of mixed
config variables.
The second is there's no way to ask about the repository
version for anything besides the main repository we're in.
git-init wants to do this, and it's possible that we would
want to start doing so for submodules (e.g., to find out
which ref backend they're using).
We can improve both by splitting the first two steps into
separate functions. Now check_repository_format_gently()
calls out to steps 1 and 2, and does 3 only if step 2
succeeds.
Note that the public interface for read_repository_format()
and what check_repository_format_gently() needs from it are
not quite the same, leading us to have an extra
read_repository_format_1() helper. The extra needs from
check_repository_format_gently() will go away in a future
patch, and we can simplify this then to just the public
interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's a chicken-and-egg problem with using the regular
git_config during the repository setup process. We get
around it here by using a special interface that lets us
specify the per-repo config, and avoid calling
git_pathdup().
But this interface doesn't actually make sense. It will look
in the system and per-user config, too; we definitely would
not want to accept a core.repositoryformatversion from
there.
The git_config_from_file interface is a better match, as it
lets us look at a single file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "shared_repository" config is loaded as part of
check_repository_format_version, but it's not quite like the
other values we check there. Something like
core.repositoryformatversion only makes sense in per-repo
config, but core.sharedrepository can be set in a per-user
config (e.g., to make all "git init" invocations shared by
default).
So it would make more sense as part of git_default_config.
Commit 457f06d (Introduce core.sharedrepository, 2005-12-22)
says:
[...]the config variable is set in the function which
checks the repository format. If this were done in
git_default_config instead, a lot of programs would need
to be modified to call git_config(git_default_config)
first.
This is still the case today, but we have one extra trick up
our sleeve. Now that we have the git_configset
infrastructure, it's not so expensive for us to ask for a
single value. So we can simply lazy-load it on demand.
This should be OK to do in general. There are some problems
with loading config before setup_git_directory() is called,
but we shouldn't be accessing the value before then (if we
were, then it would already be broken, as the variable would
not have been set by check_repository_format_version!). The
trickiest caller is git-init, but it handles the values
manually itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It would be useful to control access to the global
shared_repository, so that we can lazily load its config.
The first step to doing so is to make sure all access
goes through a set of functions.
This step is purely mechanical, and should result in no
change of behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function's interface is rather enigmatic, so let's
document it further.
While we're here, let's also drop the return value. It will
always either be "0" or the function will die (consequently,
neither of its two callers bothered to check the return).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
