| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For "rerere" say "pathspec" consistently, and list the subcommands in
the order that they're discussed in the "COMMANDS" section of the
documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The whitespace padding of alternatives should be of the form "[-f |
--force]" not "[-f|--force]". Likewise we should not have padding
before the first option, so "(--all | <pack-filename>...)" is correct,
not "( --all | <pack-filename>... )".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Almost all of our documentation doesn't use "'" syntax for
subcommands, but these did, let's make them consistent with the
rest.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new command "git switch" is added to avoid the confusion of
one-command-do-all "git checkout" for new users. They are also helpful
to avoid ambiguation context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands...
The "Checking out files" progress line in unpack-trees.c is also updated
to "Updating files" to be neutral to both git-checkout and git-switch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a file contains lines that look like conflict markers, 'git
rerere' may fail not be able to record a conflict resolution.
Emphasize that in the man page, and mention a possible workaround for
the issue.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds the 'remaining' command to the documentation of
'git rerere'. This command was added in ac49f5ca (Feb 16 2011;
Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>) but
it was never documented.
Touch up the other rerere commands to reduce noise.
First noticed by Vincent van Ravesteijn.
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/rerere-forget-always-take-pathspec:
rerere forget: deprecate invocation without pathspec
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
rerere forget is a destructive command. When invoked without a path, it
operates on the current directory, potentially deleting many recorded
conflict resolutions.
To make the command safer, a path must be specified as of git 1.8.0. Until
then, give users time to write 'git rerere forget .' if they really mean
the entire current directory.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
dea4562 (rerere forget path: forget recorded resolution, 2009-12-25)
introduced the forget subcommand for rerere.
Document it.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
Use the less ambiguous
"set variable foo in order to enable bar"
rather than
"set variable foo to enable bar" which may trick users into
assuming that "enable" is a good value for "foo".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite the gc section using unresolved and resolved instead of "not
recorded". Add plurals and missing articles. Make some sentences have
consistent tense. Try and be more active by removing "that" and
simplifying sentences.
The terms "hand-resolve" and "hand resolve" were used, so just use "hand
resolve" to be more consistent.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
asciidoc markup fixes
Fail properly when cloning from invalid HTTP URL
Conflicts:
Documentation/git-push.txt
|
|
I see quite a few pages on k.org site, e.g.
http://www.kernel.org/pub/software/scm/git/docs/git-rerere.html
(scroll down to find "After this test merge")
are misformatted to lose teletype text '+' that is followed by a comma,
and turns the following paragraph all typeset in teletype.
This patch seems to fix the issue at the site (meaning, with the
particular vintage of asciidoc and docbook toolchain), without breaking
things with the version I have at my primary development machine, but
wider testing is very much appreciated.
After this patch,
git grep '`+`,' -- Documentation
should report noting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old cox.net address is still getting mails from gitters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-rerere documentation talks about commands that invoke
"git rerere clear" automatically. git am --abort is added and
a typo is fixed additionally.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old cox.net address is still getting mails from gitters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some manual pages use teletype font to set command names. We
change them to use italics, instead. This creates a visual
distinction between names of commands and command lines that
can be typed at the command line. It is also more consistent
with other man pages outside Git.
In this patch, the commands named are non-git commands like bash.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This includes nongit commands like RCS 'merge'. This patch only
italicizes names of commands if they had no formatting before.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With git-commands moving out of $(bindir), it is useful to make a
clearer distinction between the git subcommand 'git-whatever' and
the command you type, `git whatever <options>`. So we use a dash
after "git" when referring to the former and not the latter.
I already sent a patch doing this same thing, but I missed some
spots.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rerere.enabled is _not_ on by default. The command is enabled if rr-cache
exists even when rerere.enabled is missing, and enabled or disabled by
explicitly setting the rerere.enabled variable.
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, "git rerere" was enabled by creating the directory
.git/rr-cache. That is definitely not in line with most other
features, which are enabled by a config variable.
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
[jc: with minimum tweaks]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since `git add` is the approved porcelain for an end-user to invoke
when they want to manipulate the index, porcelain documentation
should steer the user to this command rather than the pure plumbing
update-index.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also reorders a handful entries to make each list sorted
alphabetically.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
1) talk about "git merge" instead of "git pull ."
2) suggest "git repo-config" instead of directly editing config files
3) echo "URL: blah" > .git/remotes/foo is obsolete and should be
"git repo-config remote.foo.url blah"
4) support for partial URL prefix has been removed (see commit
ea560e6d64374ec1f6c163c276319a3da21a1345) so drop mention of it.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Two configuration to control the expiration of rerere records
are introduced and documented.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Over time, unresolved rr-cache entries are accumulated and they
tend to get less and less likely to be useful as the tips of
branches advance.
Reorder documentation page to show the subcommand section earlier
than the discussion section.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-am and git-rebase will be updated to use 'clear', and
diff/status can be used to aid the user in tracking progress in
the resolution process.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In a workflow that employs relatively long lived topic branches,
the developer sometimes needs to resolve the same conflict over
and over again until the topic branches are done (either merged
to the "release" branch, or sent out and accepted upstream).
This commit introduces a new command, "git rerere", to help this
process by recording the conflicted automerge results and
corresponding hand-resolve results on the initial manual merge,
and later by noticing the same conflicted automerge and applying
the previously recorded hand resolution using three-way merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
