| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
9535ce7337 (pack-objects: add list-objects filtering, 2017-11-21)
taught `git pack-objects` to use `--filter`, but required the use of
`--stdout` since a partial clone mechanism was not yet in place to
handle missing objects. Since then, changes like 9e27beaa23
(promisor-remote: implement promisor_remote_get_direct(), 2019-06-25)
and others added support to dynamically fetch objects that were missing.
Even without a promisor remote, filtering out objects can also be useful
if we can put the filtered out objects in a separate pack, and in this
case it also makes sense for pack-objects to write the packfile directly
to an actual file rather than on stdout.
Remove the `--stdout` requirement when using `--filter`, so that in a
follow-up commit, repack can pass `--filter` to pack-objects to omit
certain objects from the resulting packfile.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pack-objects learned the `--cruft` option back in b757353676
(builtin/pack-objects.c: --cruft without expiration, 2022-05-20), we
explicitly forbade `--cruft` with `--max-pack-size`.
At the time, there was no specific rationale given in the patch for not
supporting the `--max-pack-size` option with `--cruft`. (As best I can
remember, it's because we were trying to push users towards only ever
having a single cruft pack, but I cannot be sure).
However, `--max-pack-size` is flexible enough that it already works with
`--cruft` and can shard unreachable objects across multiple cruft packs,
creating separate ".mtimes" files as appropriate. In fact, the
`--max-pack-size` option worked with `--cruft` as far back as
b757353676!
This is because we overwrite the `written_list`, and pass down the
appropriate length, i.e. the number of objects written in each pack
shard.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach `pack-objects` how to generate a cruft pack when no objects are
dropped (i.e., `--cruft-expiration=never`). Later patches will teach
`pack-objects` how to generate a cruft pack that prunes objects.
When generating a cruft pack which does not prune objects, we want to
collect all unreachable objects into a single pack (noting and updating
their mtimes as we accumulate them). Ordinary use will pass the result
of a `git repack -A` as a kept pack, so when this patch says "kept
pack", readers should think "reachable objects".
Generating a non-expiring cruft packs works as follows:
- Callers provide a list of every pack they know about, and indicate
which packs are about to be removed.
- All packs which are going to be removed (we'll call these the
redundant ones) are marked as kept in-core.
Any packs the caller did not mention (but are known to the
`pack-objects` process) are also marked as kept in-core. Packs not
mentioned by the caller are assumed to be unknown to them, i.e.,
they entered the repository after the caller decided which packs
should be kept and which should be discarded.
Since we do not want to include objects in these "unknown" packs
(because we don't know which of their objects are or aren't
reachable), these are also marked as kept in-core.
- Then, we enumerate all objects in the repository, and add them to
our packing list if they do not appear in an in-core kept pack.
This results in a new cruft pack which contains all known objects that
aren't included in the kept packs. When the kept pack is the result of
`git repack -A`, the resulting pack contains all unreachable objects.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This discerns user inputs from verbatim options in the synopsis.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* jk/doc-max-pack-size:
doc: warn people against --max-pack-size
|
|
This option is almost never a good idea, as the resulting repository is
larger and slower (see the new explanations in the docs).
I outlined the potential problems. We could go further and make the
option harder to find (or at least, make the command-line option
descriptions a much more terse "you probably don't want this; see
pack.packsizeLimit for details"). But this seems like a minimal change
that may prevent people from thinking it's more useful than it is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git repack" so far has been only capable of repacking everything
under the sun into a single pack (or split by size). A cleverer
strategy to reduce the cost of repacking a repository has been
introduced.
* tb/geometric-repack:
builtin/pack-objects.c: ignore missing links with --stdin-packs
builtin/repack.c: reword comment around pack-objects flags
builtin/repack.c: be more conservative with unsigned overflows
builtin/repack.c: assign pack split later
t7703: test --geometric repack with loose objects
builtin/repack.c: do not repack single packs with --geometric
builtin/repack.c: add '--geometric' option
packfile: add kept-pack cache for find_kept_pack_entry()
builtin/pack-objects.c: rewrite honor-pack-keep logic
p5303: measure time to repack with keep
p5303: add missing &&-chains
builtin/pack-objects.c: add '--stdin-packs' option
revision: learn '--no-kept-objects'
packfile: introduce 'find_kept_pack_entry()'
|
|
In an upcoming commit, 'git repack' will want to create a pack comprised
of all of the objects in some packs (the included packs) excluding any
objects in some other packs (the excluded packs).
This caller could iterate those packs themselves and feed the objects it
finds to 'git pack-objects' directly over stdin, but this approach has a
few downsides:
- It requires every caller that wants to drive 'git pack-objects' in
this way to implement pack iteration themselves. This forces the
caller to think about details like what order objects are fed to
pack-objects, which callers would likely rather not do.
- If the set of objects in included packs is large, it requires
sending a lot of data over a pipe, which is inefficient.
- The caller is forced to keep track of the excluded objects, too, and
make sure that it doesn't send any objects that appear in both
included and excluded packs.
But the biggest downside is the lack of a reachability traversal.
Because the caller passes in a list of objects directly, those objects
don't get a namehash assigned to them, which can have a negative impact
on the delta selection process, causing 'git pack-objects' to fail to
find good deltas even when they exist.
The caller could formulate a reachability traversal themselves, but the
only way to drive 'git pack-objects' in this way is to do a full
traversal, and then remove objects in the excluded packs after the
traversal is complete. This can be detrimental to callers who care
about performance, especially in repositories with many objects.
Introduce 'git pack-objects --stdin-packs' which remedies these four
concerns.
'git pack-objects --stdin-packs' expects a list of pack names on stdin,
where 'pack-xyz.pack' denotes that pack as included, and
'^pack-xyz.pack' denotes it as excluded. The resulting pack includes all
objects that are present in at least one included pack, and aren't
present in any excluded pack.
To address the delta selection problem, 'git pack-objects --stdin-packs'
works as follows. First, it assembles a list of objects that it is going
to pack, as above. Then, a reachability traversal is started, whose tips
are any commits mentioned in included packs. Upon visiting an object, we
find its corresponding object_entry in the to_pack list, and set its
namehash parameter appropriately.
To avoid the traversal visiting more objects than it needs to, the
traversal is halted upon encountering an object which can be found in an
excluded pack (by marking the excluded packs as kept in-core, and
passing --no-kept-objects=in-core to the revision machinery).
This can cause the traversal to halt early, for example if an object in
an included pack is an ancestor of ones in excluded packs. But stopping
early is OK, since filling in the namehash fields of objects in the
to_pack list is only additive (i.e., having it helps the delta selection
process, but leaving it blank doesn't impact the correctness of the
resulting pack).
Even still, it is unlikely that this hurts us much in practice, since
the 'git repack --geometric' caller (which is introduced in a later
commit) marks small packs as included, and large ones as excluded.
During ordinary use, the small packs usually represent pushes after a
large repack, and so are unlikely to be ancestors of objects that
already exist in the repository.
(I found it convenient while developing this patch to have 'git
pack-objects' report the number of objects which were visited and got
their namehash fields filled in during traversal. This is also included
in the below patch via trace2 data lines).
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Knowing about the core.bigFileThreshold configuration variable is
helpful when examining pack file size differences between repositories.
Add a reference to it to the manpages a user is likely to read in this
situation.
Capitalize CONFIGURATION for consistency with other pages having such a
section.
Signed-off-by: Christian Walther <cwalther@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The options --missing=allow-{any,promisor} were introduced in caf3827e2f
("rev-list: add list-objects filtering support", 2017-11-22) with the
following note in the commit message:
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
The idea that these options are missing-object aware (and thus do not
need to lazily fetch objects, unlike unaware commands that assume that
all objects are present) are assumed in later commits such as 07ef3c6604
("fetch test: use more robust test for filtered objects", 2020-01-15).
However, the current implementations of these options use
has_object_file(), which indeed lazily fetches missing objects. Teach
these implementations not to do so. Also, update the documentation of
these options to be clearer.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pack.useSparse config option was introduced by 3d036eb0
(pack-objects: create pack.useSparse setting, 2019-01-19) and was
first available in v2.21.0. When enabled, the pack-objects process
during 'git push' will use a sparse tree walk when deciding which
trees and blobs to send to the remote. The algorithm was introduced
by d5d2e93 (revision: implement sparse algorithm, 2019-01-16) and
has been in production use by VFS for Git since around that time.
The features.experimental config option also enabled pack.useSparse,
so hopefully that has also increased exposure.
It is worth noting that pack.useSparse has a possibility of
sending more objects across a push, but requires a special
arrangement of exact _copies_ across directories. There is a test
in t5322-pack-objects-sparse.sh that demonstrates this possibility.
This test uses the --sparse option to "git pack-objects" but we
can make it implied by the config value to demonstrate that the
default value has changed.
While updating that test, I noticed that the documentation did not
include an option for --no-sparse, which is now more important than
it was before.
Since the downside is unlikely but the upside is significant, set
the default value of pack.useSparse to true. Remove it from the
set of options implied by features.experimental.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating a pack-file using 'git pack-objects --revs' we provide
a list of interesting and uninteresting commits. For example, a push
operation would make the local topic branch be interesting and the
known remote refs as uninteresting. We want to discover the set of
new objects to send to the server as a thin pack.
We walk these commits until we discover a frontier of commits such
that every commit walk starting at interesting commits ends in a root
commit or unintersting commit. We then need to discover which
non-commit objects are reachable from uninteresting commits. This
commit walk is not changing during this series.
The mark_edges_uninteresting() method in list-objects.c iterates on
the commit list and does the following:
* If the commit is UNINTERSTING, then mark its root tree and every
object it can reach as UNINTERESTING.
* If the commit is interesting, then mark the root tree of every
UNINTERSTING parent (and all objects that tree can reach) as
UNINTERSTING.
At the very end, we repeat the process on every commit directly
given to the revision walk from stdin. This helps ensure we properly
cover shallow commits that otherwise were not included in the
frontier.
The logic to recursively follow trees is in the
mark_tree_uninteresting() method in revision.c. The algorithm avoids
duplicate work by not recursing into trees that are already marked
UNINTERSTING.
Add a new 'sparse' option to the mark_edges_uninteresting() method
that performs this logic in a slightly different way. As we iterate
over the commits, we add all of the root trees to an oidset. Then,
call mark_trees_uninteresting_sparse() on that oidset. Note that we
include interesting trees in this process. The current implementation
of mark_trees_unintersting_sparse() will walk the same trees as
the old logic, but this will be replaced in a later change.
Add a '--sparse' flag in 'git pack-objects' to call this new logic.
Add a new test script t/t5322-pack-objects-sparse.sh that tests this
option. The tests currently demonstrate that the resulting object
list is the same as the old algorithm. This includes a case where
both algorithms pack an object that is not needed by a remote due to
limits on the explored set of trees. When the sparse algorithm is
changed in a later commit, we will add a test that demonstrates a
change of behavior in some cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement support for delta islands in git pack-objects
and document how delta islands work in
"Documentation/git-pack-objects.txt" and Documentation/config.txt.
This allows users to setup delta islands in their config and
get the benefit of less disk usage while cloning and fetching
is still quite fast and not much more CPU intensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* nd/pack-unreachable-objects-doc:
pack-objects: validation and documentation about unreachable options
|
|
"git pack-objects" needs to allocate tons of "struct object_entry"
while doing its work, and shrinking its size helps the performance
quite a bit.
* nd/pack-objects-pack-struct:
ci: exercise the whole test suite with uncommon code in pack-objects
pack-objects: reorder members to shrink struct object_entry
pack-objects: shrink delta_size field in struct object_entry
pack-objects: shrink size field in struct object_entry
pack-objects: clarify the use of object_entry::size
pack-objects: don't check size when the object is bad
pack-objects: shrink z_delta_size field in struct object_entry
pack-objects: refer to delta objects by index instead of pointer
pack-objects: move in_pack out of struct object_entry
pack-objects: move in_pack_pos out of struct object_entry
pack-objects: use bitfield for object_entry::depth
pack-objects: use bitfield for object_entry::dfs_state
pack-objects: turn type and in_pack_type to bitfields
pack-objects: a bit of document about struct object_entry
read-cache.c: make $GIT_TEST_SPLIT_INDEX boolean
|
|
These options are added in [1] [2] [3]. All these depend on running
rev-list internally which is normally true since they are always used
with "--all --objects" which implies --revs. But let's keep this
dependency explicit.
While at there, add documentation for them. These are mostly used
internally by git-repack. But it's still good to not chase down the
right commit message to know how they work.
[1] ca11b212eb (let pack-objects do the writing of unreachable objects
as loose objects - 2008-05-14)
[2] 08cdfb1337 (pack-objects --keep-unreachable - 2007-09-16)
[3] e26a8c4721 (repack: extend --keep-unreachable to loose objects -
2016-06-13)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We allow to keep existing packs by having companion .keep files. This
is helpful when a pack is permanently kept. In the next patch, git-gc
just wants to keep a pack temporarily, for one pack-objects
run. git-gc can use --keep-pack for this use case.
A note about why the pack_keep field cannot be reused and
pack_keep_in_core has to be added. This is about the case when
--keep-pack is specified together with either --keep-unreachable or
--unpack-unreachable, but --honor-pack-keep is NOT specified.
In this case, we want to exclude objects from the packs specified on
command line, not from ones with .keep files. If only one bit flag is
used, we have to clear pack_keep on pack files with the .keep file.
But we can't make any assumption about unreachable objects in .keep
packs. If "pack_keep" field is false for .keep packs, we could
potentially pull lots of unreachable objects into the new pack, or
unpack them loose. The safer approach is ignore all packs with either
.keep file or --keep-pack.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because of struct packing from now on we can only handle max depth
4095 (or even lower when new booleans are added in this struct). This
should be ok since long delta chain will cause significant slow down
anyway.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach gc to stop traversal at promisor objects, and to leave promisor
packfiles alone. This has the effect of only repacking non-promisor
packfiles, and preserves the distinction between promisor packfiles and
non-promisor packfiles.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach opt_parse_list_objects_filter() to take --no-filter
option and to free the contents of struct filter_options.
This command line argument will be automatically inherited
by commands using OPT_PARSE_LIST_OBJECTS_FILTER(); this
includes pack-objects.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach pack-objects to use the filtering provided by the
traverse_commit_list_filtered() interface to omit unwanted
objects from the resulting packfile.
Filtering requires the use of the "--stdout" option.
Add t5317 test.
In the future, we will introduce a "partial clone" mechanism
wherein an object in a repo, obtained from a remote, may
reference a missing object that can be dynamically fetched from
that remote once needed. This "partial clone" mechanism will
have a way, sometimes slow, of determining if a missing link
is one of the links expected to be produced by this mechanism.
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation for pack-objects describes that it creates "a packed
archive of objects", which is confusing because it may create multiple
packs if --max-pack-size is set. Update the documentation to clarify
this, and explaining in which cases such a feature would be useful.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Stahl <mstahl@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be tempting for a server admin to want a stable set of
long-lived packs for dumb clients; but also want to enable bitmaps
to serve smart clients more quickly.
Unfortunately, such a configuration is impossible; so at least warn
users of this incompatibility since commit 21134714 (pack-objects:
turn off bitmaps when we split packs, 2014-10-16).
Tested the warning by inspecting the output of:
make -C t t5310-pack-bitmaps.sh GIT_TEST_OPTS=-v
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Older versions of AsciiDoc would convert the "--" in
"--option" into an emdash. According to 565e135
(Documentation: quote double-dash for AsciiDoc, 2011-06-29),
this is fixed in AsciiDoc 8.3.0. According to bf17126, we
don't support anything older than 8.4.1 anyway, so we no
longer need to worry about quoting.
Even though this does not change the output at all, there
are a few good reasons to drop the quoting:
1. It makes the source prettier to read.
2. We don't quote consistently, which may be confusing when
reading the source.
3. Asciidoctor does not like the quoting, and renders a
literal backslash.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching into or pushing from a shallow repository, we want to
aggressively mark edges as uninteresting, since this decreases the pack
size. However, aggressively marking edges can negatively affect
performance on large non-shallow repositories with lots of refs.
Teach pack-objects a --shallow option to indicate that we're pushing
from or fetching into a shallow repository. Use
--objects-edge-aggressive only for shallow repositories and otherwise
use --objects-edge, which performs better in the general case. Update
the callers to pass the --shallow option when they are dealing with a
shallow repository.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before cdab485 (upload-pack: delegate rev walking in shallow fetch to
pack-objects - 2013-08-16) upload-pack does not write to the source
repository. cdab485 starts to write $GIT_DIR/shallow_XXXXXX if it's a
shallow fetch, so the source repo must be writable.
git:// servers do not need write access to repos and usually don't
have it, which means cdab485 breaks shallow clone over git://
Instead of using a temporary file as the media for shallow points, we
can send them over stdin to pack-objects as well. Prepend shallow
SHA-1 with --shallow so pack-objects knows what is what.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After 1190a1a (pack-objects: name pack files after trailer hash,
2013-12-05), the SHA-1 used to determine the filename is calculated
differently. Update the documentation to not guarantee anything more
than that the SHA-1 depends on the pack content somehow.
Hopefully this will discourage readers from depending on the old or
the new calculation.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I found that some doubled words had snuck back into projects from which
I'd already removed them, so now there's a "syntax-check" makefile rule in
gnulib to help prevent recurrence.
Running the command below spotted a few in git, too:
git ls-files | xargs perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt])\s+\1\b/gims)' \
-e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g;' \
-e 'print "$ARGV:$n:$v\n"}'
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
The underlying pack-objects plumbing command still needs an explicit
option from the command line, but these days Porcelain passes the
option, so there is no need for end users to worry about it anymore.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
contrib/thunderbird-patch-inline: do not require bash to run the script
t8001: check the exit status of the command being tested
strbuf.h: remove a tad stale docs-in-comment and reference api-doc instead
Typos: t/README
Documentation/config.txt: make truth value of numbers more explicit
git-pack-objects.txt: fix grammatical errors
parse-remote: replace unnecessary sed invocation
|
|
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
Remove some stray usage of other bracket types and asterisks for the
same purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nelson Elhage <nelhage@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These were written back when we always read objects from the standard
input. These days --revs and its friends can feed only the start and
end points and have the command internally enumerate the objects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current documentation suggests that --local also ignores any
objects in local packs, which is incorrect. Change the language to be
clearer and more parallel to the other options that ignore objects.
While we're at it, fix a trivial error in --incremental's
documentation.
Signed-off-by: Nelson Elhage <nelhage@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description for --thin was misleading and downright wrong. Correct
it with some inspiration from the description of index-pack's --fix-thin
and some background information from Nicolas Pitre <nico@fluxnic.net>.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we
may also consult the packed refs mechanism. These days we tend to treat
the "refs hierarchy" as more of an abstract namespace that happens to be
represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at
worst it can confuse users who then look in $GIT_DIR/refs and find that it
is missing some of the refs they expected to see.
This patch drops most uses of "$GIT_DIR/refs/*", changing them into just
"refs/*", under the assumption that users can handle the concept of an
abstract refs namespace. There are a few things to note:
- most cases just dropped the $GIT_DIR/ portion. But for cases where
that left _just_ the word "refs", I changed it to "refs/" to help
indicate that it was a hierarchy. I didn't do the same for longer
paths (e.g., "refs/heads" remained, instead of becoming
"refs/heads/").
- in some cases, no change was made, as the text was explicitly about
unpacked refs (e.g., the discussion in git-pack-refs).
- In some cases it made sense instead to note the existence of packed
refs (e.g., in check-ref-format and rev-parse).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The value passed to --max-pack-size used to count in MiB which was
inconsistent with the corresponding configuration variable as well as
other command arguments which are defined to count in bytes with an
optional unit suffix. This brings --max-pack-size in line with the
rest of Git.
Also, in order not to cause havoc with people used to the previous
megabyte scale, and because this is a sane thing to do anyway, a
minimum size of 1 MiB is enforced to avoid an explosion of pack files.
Adjust and extend test suite accordingly.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
Currently the --all-progress flag is used to use force progress display
during the writing object phase even if output goes to stdout which is
primarily the case during a push operation. This has the unfortunate
side effect of forcing progress display even if stderr is not a
terminal.
Let's introduce the --all-progress-implied argument which has the same
intent except for actually forcing the activation of any progress
display. With this, progress display will be automatically inhibited
whenever stderr is not a terminal, or full progress display will be
included otherwise. This should let people use 'git push' within a cron
job without filling their logs with useless percentage displays.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you have grafts that pretend that a given commit has different
parents than the ones recorded in the commit object, it is dangerous
to let 'git repack' remove those hidden parents, as you can easily
remove the graft and end up with a broken repository.
So let's play it safe and keep those parent objects and everything
that is reachable by them, in addition to the grafted parents.
As this behavior can only be triggered by git pack-objects, and as that
command handles duplicate parents gracefully, we do not bother to cull
duplicated parents that may result by using both true and grafted
parents.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this patch, --local means pack only local objects that are not already
packed.
Additionally, this fixes t7700 testing whether loose objects in an alternate
object database are repacked.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds a new option to pack-objects which will cause it to ignore an
object which appears in a local pack which has a .keep file, even if it
was specified for packing.
This option will be used by the porcelain repack.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consistently say so in all caps as it is customary to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is a bit confusing on first read, that
"The packed archive format (.pack) is designed
to be unpackable..."
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new option "--include-tag" allows the caller to request that
any annotated tag be included into the packfile if the object the tag
references was also included as part of the packfile.
This option can be useful on the server side of a native git transport,
where the server knows what commits it is including into a packfile to
update the client. If new annotated tags have been introduced then we
can also include them in the packfile, saving the client from needing
to request them through a second connection.
This change only introduces the backend option and provides a test.
Protocol extensions to make this useful in fetch-pack/upload-pack
are still necessary to activate the logic during transport.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Packing objects can be done in parallell nowadays, but it's
only done if the config option pack.threads is set to a value
above 1. Because of that, the code-path used is often not the
most optimal one.
This patch adds a routine to detect the number of online CPU's
at runtime (online_cpus()). When pack.threads (or --threads=) is
given a value of 0, the number of threads is set to the number of
online CPU's. This feature is also documented.
As per Nicolas Pitre's recommendations, the default is still to
run pack-objects single-threaded unless explicitly activated,
either by configuration or by command line parameter.
The routine online_cpus() is a rework of "numcpus.c", written by
one Philip Willoughby <pgw99@doc.ic.ac.uk>. numcpus.c is in the
public domain and can presently be downloaded from
http://csgsoft.doc.ic.ac.uk/numcpus/
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pack-objects" has the option --max-pack-size to limit the file
size of the packs to a certain amount of bytes. On platforms where
the pack file size is limited by filesystem constraints, it is easy
to forget this option, and this option does not exist for "git gc"
to begin with.
So introduce a config variable to set the default maximum, but make
this overrideable by the command line.
Suggested by Tor Arvid Lund.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-svn: don't attempt to spawn pager if we don't want one
Supplant the "while case ... break ;; esac" idiom
User Manual: add a chapter for submodules
user-manual: don't assume refs are stored under .git/refs
Detect exec bit in more cases.
Conjugate "search" correctly in the git-prune-packed man page.
Move the paragraph specifying where the .idx and .pack files should be
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
|
|
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* np/delta:
builtin-pack-objects.c: avoid bogus gcc warnings
threaded delta search: proper locking for cache accounting
threaded delta search: add pack.threads config variable
fix threaded delta search locking
threaded delta search: specify number of threads at run time
threaded delta search: better chunck split point
threaded delta search: refine work allocation
basic threaded delta search
rearrange delta search progress reporting
localize window memory usage accounting
straighten the list of objects to deltify
|
|
Remove obsolete details (core.legacyheaders is always true now).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds a --threads=<n> parameter to 'git pack-objects' with
documentation.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brian Downing <bdowning@lavos.net>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --max-pack-size parsing and usage messages.
Upgrade git-repack.sh to handle multiple packfile names,
and build packfiles in GIT_OBJECT_DIRECTORY not GIT_DIR.
Update documentation.
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add config variables pack.compression and core.loosecompression ,
and switch --compression=level to pack-objects.
Loose objects will be compressed using core.loosecompression if set,
else core.compression if set, else Z_BEST_SPEED.
Packed objects will be compressed using --compression=level if seen,
else pack.compression if set, else core.compression if set,
else Z_DEFAULT_COMPRESSION. This is the "pack compression level".
Loose objects added to a pack undeltified will be recompressed
to the pack compression level if it is unequal to the current
loose compression level by the preceding rules, or if the loose
object was written while core.legacyheaders = true. Newly
deltified loose objects are always compressed to the current
pack compression level.
Previously packed objects added to a pack are recompressed
to the current pack compression level exactly when their
deltification status changes, since the previous pack data
cannot be reused.
In either case, the --no-reuse-object switch from the first
patch below will always force recompression to the current pack
compression level, instead of assuming the pack compression level
hasn't changed and pack data can be reused when possible.
This applies on top of the following patches from Nicolas Pitre:
[PATCH] allow for undeltified objects not to be reused
[PATCH] make "repack -f" imply "pack-objects --no-reuse-object"
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Currently non deltified object data is always reused when possible.
This means that any change to core.compression has no effect on those
objects as they don't get recompressed when repacking them.
Let's add a --no-reuse-object flag to git-repack in order to force
recompression of all objects when desired.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds documentation for --progress and --all-progress, remove a
duplicate --progress handling and make usage string more readable.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Currently git-push displays progress status for the local packing of
objects to send, but nothing once it starts to push it over the
connection. Having progress status in that later case is especially
nice when pushing lots of objects over a slow network link.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
pack-objects doesn't create random pack names
link_temp_to_file: don't leave the path truncated on adjust_shared_perm failure
|
|
Documentation for pack-objects seems to be out of date in this regard.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* np/pack:
add the capability for index-pack to read from a stream
index-pack: compare only the first 20-bytes of the key.
git-repack: repo.usedeltabaseoffset
pack-objects: document --delta-base-offset option
allow delta data reuse even if base object is a preferred base
zap a debug remnant
let the GIT native protocol use offsets to delta base when possible
make pack data reuse compatible with both delta types
make git-pack-objects able to create deltas with offset to base
teach git-index-pack about deltas with offset to base
teach git-unpack-objects about deltas with offset to base
introduce delta objects with offset to base
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Currently, you actually have to read the source to find out the
default values. While at it, fix two typos and suggest that these
options actually take a parameter in git-pack-objects.txt.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Changes the documentation that uses 'See-Also' to the more common
'See Also' form.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This introduces --no-reuse-delta option to disable reusing of
existing delta, which is a large part of the optimization
introduced by this series. This may become necessary if
repeated repacking makes delta chain too long. With this, the
output of the command becomes identical to that of the older
implementation. But the performance suffers greatly.
It still allows reusing non-deltified representations; there is
no point uncompressing and recompressing the whole text.
It also adds a couple more statistics output, while squelching
it under -q flag, which the last round forgot to do.
$ time old-git-pack-objects --stdout >/dev/null <RL
Generating pack...
Done counting 184141 objects.
Packing 184141 objects....................
real 12m8.530s user 11m1.450s sys 0m57.920s
$ time git-pack-objects --stdout >/dev/null <RL
Generating pack...
Done counting 184141 objects.
Packing 184141 objects.....................
Total 184141, written 184141 (delta 138297), reused 178833 (delta 134081)
real 0m59.549s user 0m56.670s sys 0m2.400s
$ time git-pack-objects --stdout --no-reuse-delta >/dev/null <RL
Generating pack...
Done counting 184141 objects.
Packing 184141 objects.....................
Total 184141, written 184141 (delta 134833), reused 47904 (delta 0)
real 11m13.830s user 9m45.240s sys 0m44.330s
There is one remaining issue when --no-reuse-delta option is not
used. It can create delta chains that are deeper than specified.
A<--B<--C<--D E F G
Suppose we have a delta chain A to D (A is stored in full either
in a pack or as a loose object. B is depth1 delta relative to A,
C is depth2 delta relative to B...) with loose objects E, F, G.
And we are going to pack all of them.
B, C and D are left as delta against A, B and C respectively.
So A, E, F, and G are examined for deltification, and let's say
we decided to keep E expanded, and store the rest as deltas like
this:
E<--F<--G<--A
Oops. We ended up making D a bit too deep, didn't we? B, C and
D form a chain on top of A!
This is because we did not know what the final depth of A would
be, when we checked objects and decided to keep the existing
delta. Unfortunately, deferring the decision until just before
the deltification is not an option. To be able to make B, C,
and D candidates for deltification with the rest, we need to
know the type and final unexpanded size of them, but the major
part of the optimization comes from the fact that we do not read
the delta data to do so -- getting the final size is quite an
expensive operation.
To prevent this from happening, we should keep A from being
deltified. But how would we tell that, cheaply?
To do this most precisely, after check_object() runs, each
object that is used as the base object of some existing delta
needs to be marked with the maximum depth of the objects we
decided to keep deltified (in this case, D is depth 3 relative
to A, so if no other delta chain that is longer than 3 based on
A exists, mark A with 3). Then when attempting to deltify A, we
would take that number into account to see if the final delta
chain that leads to D becomes too deep.
However, this is a bit cumbersome to compute, so we would cheat
and reduce the maximum depth for A arbitrarily to depth/4 in
this implementation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This provides (minimal) documentation for the --non-empty command-line
option to the pack-objects command.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Convert usage of GIT and Git into git.
Signed-off-by: Christian Meder <chris@absolutegiganten.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Christian Meder <chris@absolutegiganten.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The fixes focuses on improving the HTML output. Most noteworthy:
- Fix the Makefile to also make various *.html files depend on
included files.
- Consistently use 'NOTE: ...' instead of '[ ... ]' for additional
info.
- Fix ending '::' for description lists in OPTION section etc.
- Fix paragraphs in description lists ending up as preformated text.
- Always use listingblocks (preformatted text wrapped in lines with -----)
for examples that span empty lines, so they are put in only one HTML
block.
- Use '1.' instead of '(1)' for numbered lists.
- Fix linking to other GIT docs.
- git-rev-list.txt: put option descriptions in an OPTION section.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: the patch forgot to update the main git.txt documentation,
making all these new documentation practically no-op, so I added
a minimum attempt linking them from there.]
Signed-off-by: Ryan Anderson <ryan@michonline.com>
|
|
[jc: Johannes spent time and effort to see how consistent our
use of terminilogy is, and as a byproduct made these corrections
not related to the terminology unification. I really appreciate
it.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds documentation for creating packed archives, inspecting,
validating them, and unpacking them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
