| NAME | SYNOPSIS | DESCRIPTION | NOTES | SEE ALSO | COLOPHON | The Linux Programming Interface |
ELF(5) Linux Programmer's Manual ELF(5)
elf - format of Executable and Linking Format (ELF) files
#include <elf.h>
The header file <elf.h> defines the format of ELF executable binary files.
Amongst these files are normal executable files, relocatable object files,
core files and shared libraries.
An executable file using the ELF file format consists of an ELF header,
followed by a program header table or a section header table, or both. The
ELF header is always at offset zero of the file. The program header table and
the section header table's offset in the file are defined in the ELF header.
The two tables describe the rest of the particularities of the file.
This header file describes the above mentioned headers as C structures and
also includes structures for dynamic sections, relocation sections and symbol
tables.
The following types are used for N-bit architectures (N=32,64, ElfN stands for
Elf32 or Elf64, uintN_t stands for uint32_t or uint64_t):
ElfN_Addr Unsigned program address, uintN_t
ElfN_Off Unsigned file offset, uintN_t
ElfN_Section Unsigned section index, uint16_t
ElfN_Versym Unsigned version symbol information, uint16_t
Elf_Byte unsigned char
ElfN_Half uint16_t
ElfN_Sword int32_t
ElfN_Word uint32_t
ElfN_Sxword int64_t
ElfN_Xword uint64_t
(Note: The *BSD terminology is a bit different. There Elf64_Half is twice as
large as Elf32_Half, and Elf64Quarter is used for uint16_t. In order to avoid
confusion these types are replaced by explicit ones in the below.)
All data structures that the file format defines follow the "natural" size and
alignment guidelines for the relevant class. If necessary, data structures
contain explicit padding to ensure 4-byte alignment for 4-byte objects, to
force structure sizes to a multiple of 4, etc.
The ELF header is described by the type Elf32_Ehdr or Elf64_Ehdr:
#define EI_NIDENT 16
typedef struct {
unsigned char e_ident[EI_NIDENT];
uint16_t e_type;
uint16_t e_machine;
uint32_t e_version;
ElfN_Addr e_entry;
ElfN_Off e_phoff;
ElfN_Off e_shoff;
uint32_t e_flags;
uint16_t e_ehsize;
uint16_t e_phentsize;
uint16_t e_phnum;
uint16_t e_shentsize;
uint16_t e_shnum;
uint16_t e_shstrndx;
} ElfN_Ehdr;
The fields have the following meanings:
e_ident This array of bytes specifies to interpret the file, independent
of the processor or the file's remaining contents. Within this
array everything is named by macros, which start with the prefix
EI_ and may contain values which start with the prefix ELF. The
following macros are defined:
EI_MAG0 The first byte of the magic number. It must be filled
with ELFMAG0. (0: 0x7f)
EI_MAG1 The second byte of the magic number. It must be
filled with ELFMAG1. (1: 'E')
EI_MAG2 The third byte of the magic number. It must be filled
with ELFMAG2. (2: 'L')
EI_MAG3 The fourth byte of the magic number. It must be
filled with ELFMAG3. (3: 'F')
EI_CLASS The fifth byte identifies the architecture for this
binary:
ELFCLASSNONE This class is invalid.
ELFCLASS32 This defines the 32-bit architecture.
It supports machines with files and
virtual address spaces up to 4
Gigabytes.
ELFCLASS64 This defines the 64-bit architecture.
EI_DATA The sixth byte specifies the data encoding of the
processor-specific data in the file. Currently these
encodings are supported:
ELFDATANONE Unknown data format.
ELFDATA2LSB Two's complement, little-endian.
ELFDATA2MSB Two's complement, big-endian.
EI_VERSION The version number of the ELF specification:
EV_NONE Invalid version.
EV_CURRENT Current version.
EI_OSABI This byte identifies the operating system and ABI to
which the object is targeted. Some fields in other
ELF structures have flags and values that have
platform-specific meanings; the interpretation of
those fields is determined by the value of this byte.
E.g.:
ELFOSABI_NONE Same as ELFOSABI_SYSV
ELFOSABI_SYSV UNIX System V ABI.
ELFOSABI_HPUX HP-UX ABI.
ELFOSABI_NETBSD NetBSD ABI.
ELFOSABI_LINUX Linux ABI.
ELFOSABI_SOLARIS Solaris ABI.
ELFOSABI_IRIX IRIX ABI.
ELFOSABI_FREEBSD FreeBSD ABI.
ELFOSABI_TRU64 TRU64 UNIX ABI.
ELFOSABI_ARM ARM architecture ABI.
ELFOSABI_STANDALONE Stand-alone (embedded) ABI.
EI_ABIVERSION
This byte identifies the version of the ABI to which
the object is targeted. This field is used to
distinguish among incompatible versions of an ABI.
The interpretation of this version number is dependent
on the ABI identified by the EI_OSABI field.
Applications conforming to this specification use the
value 0.
EI_PAD Start of padding. These bytes are reserved and set to
zero. Programs which read them should ignore them.
The value for EI_PAD will change in the future if
currently unused bytes are given meanings.
EI_NIDENT The size of the e_ident array.
e_type This member of the structure identifies the object file type:
ET_NONE An unknown type.
ET_REL A relocatable file.
ET_EXEC An executable file.
ET_DYN A shared object.
ET_CORE A core file.
e_machine This member specifies the required architecture for an individual
file. E.g.:
EM_NONE An unknown machine.
EM_M32 AT&T WE 32100.
EM_SPARC Sun Microsystems SPARC.
EM_386 Intel 80386.
EM_68K Motorola 68000.
EM_88K Motorola 88000.
EM_860 Intel 80860.
EM_MIPS MIPS RS3000 (big-endian only).
EM_PARISC HP/PA.
EM_SPARC32PLUS
SPARC with enhanced instruction set.
EM_PPC PowerPC.
EM_PPC64 PowerPC 64-bit.
EM_S390 IBM S/390
EM_ARM Advanced RISC Machines
EM_SH Renesas SuperH
EM_SPARCV9 SPARC v9 64-bit.
EM_IA_64 Intel Itanium
EM_X86_64 AMD x86-64
EM_VAX DEC Vax.
e_version This member identifies the file version:
EV_NONE Invalid version.
EV_CURRENT Current version.
e_entry This member gives the virtual address to which the system first
transfers control, thus starting the process. If the file has no
associated entry point, this member holds zero.
e_phoff This member holds the program header table's file offset in bytes.
If the file has no program header table, this member holds zero.
e_shoff This member holds the section header table's file offset in bytes.
If the file has no section header table this member holds zero.
e_flags This member holds processor-specific flags associated with the
file. Flag names take the form EF_`machine_flag'. Currently no
flags have been defined.
e_ehsize This member holds the ELF header's size in bytes.
e_phentsize This member holds the size in bytes of one entry in the file's
program header table; all entries are the same size.
e_phnum This member holds the number of entries in the program header
table. Thus the product of e_phentsize and e_phnum gives the
table's size in bytes. If a file has no program header, e_phnum
holds the value zero.
If the number of entries in the program header table is larger
than or equal to PN_XNUM (0xffff), this member holds PN_XNUM
(0xffff) and the real number of entries in the program header
table is held in the sh_info member of the initial entry in
section header table. Otherwise, the sh_info member of the
initial entry contains the value zero.
PN_XNUM This is defined as 0xffff, the largest number e_phnum can
have, specifying where the actual number of program
headers is assigned.
e_shentsize This member holds a sections header's size in bytes. A section
header is one entry in the section header table; all entries are
the same size.
e_shnum This member holds the number of entries in the section header
table. Thus the product of e_shentsize and e_shnum gives the
section header table's size in bytes. If a file has no section
header table, e_shnum holds the value of zero.
If the number of entries in the section header table is larger
than or equal to SHN_LORESERVE (0xff00), e_shnum holds the value
zero and the real number of entries in the section header table is
held in the sh_size member of the initial entry in section header
table. Otherwise, the sh_size member of the initial entry in the
section header table holds the value zero.
e_shstrndx This member holds the section header table index of the entry
associated with the section name string table. If the file has no
section name string table, this member holds the value SHN_UNDEF.
If the index of section name string table section is larger than
or equal to SHN_LORESERVE (0xff00), this member holds SHN_XINDEX
(0xffff) and the real index of the section name string table
section is held in the sh_link member of the initial entry in
section header table. Otherwise, the sh_link member of the initial
entry in section header table contains the value zero.
SHN_UNDEF This value marks an undefined, missing, irrelevant,
or otherwise meaningless section reference. For
example, a symbol "defined" relative to section
number SHN_UNDEF is an undefined symbol.
SHN_LORESERVE This value specifies the lower bound of the range of
reserved indices.
SHN_LOPROC Values greater than or equal to SHN_HIPROC are
reserved for processor-specific semantics.
SHN_HIPROC Values less than or equal to SHN_LOPROC are reserved
for processor-specific semantics.
SHN_ABS This value specifies absolute values for the
corresponding reference. For example, symbols
defined relative to section number SHN_ABS have
absolute values and are not affected by relocation.
SHN_COMMON Symbols defined relative to this section are common
symbols, such as Fortran COMMON or unallocated C
external variables.
SHN_HIRESERVE This value specifies the upper bound of the range of
reserved indices between SHN_LORESERVE and
SHN_HIRESERVE, inclusive; the values do not
reference the section header table. That is, the
section header table does not contain entries for
the reserved indices.
An executable or shared object file's program header table is an array of
structures, each describing a segment or other information the system needs to
prepare the program for execution. An object file segment contains one or
more sections. Program headers are meaningful only for executable and shared
object files. A file specifies its own program header size with the ELF
header's e_phentsize and e_phnum members. The ELF program header is described
by the type Elf32_Phdr or Elf64_Phdr depending on the architecture:
typedef struct {
uint32_t p_type;
Elf32_Off p_offset;
Elf32_Addr p_vaddr;
Elf32_Addr p_paddr;
uint32_t p_filesz;
uint32_t p_memsz;
uint32_t p_flags;
uint32_t p_align;
} Elf32_Phdr;
typedef struct {
uint32_t p_type;
uint32_t p_flags;
Elf64_Off p_offset;
Elf64_Addr p_vaddr;
Elf64_Addr p_paddr;
uint64_t p_filesz;
uint64_t p_memsz;
uint64_t p_align;
} Elf64_Phdr;
The main difference between the 32-bit and the 64-bit program header lies in
the location of the p_flags member in the total struct.
p_type This member of the Phdr struct tells what kind of segment this
array element describes or how to interpret the array element's
information.
PT_NULL The array element is unused and the other members'
values are undefined. This lets the program header
have ignored entries.
PT_LOAD The array element specifies a loadable segment,
described by p_filesz and p_memsz. The bytes from the
file are mapped to the beginning of the memory
segment. If the segment's memory size p_memsz is
larger than the file size p_filesz, the "extra" bytes
are defined to hold the value 0 and to follow the
segment's initialized area. The file size may not be
larger than the memory size. Loadable segment entries
in the program header table appear in ascending order,
sorted on the p_vaddr member.
PT_DYNAMIC The array element specifies dynamic linking
information.
PT_INTERP The array element specifies the location and size of a
null-terminated pathname to invoke as an interpreter.
This segment type is meaningful only for executable
files (though it may occur for shared objects).
However it may not occur more than once in a file. If
it is present, it must precede any loadable segment
entry.
PT_NOTE The array element specifies the location and size for
auxiliary information.
PT_SHLIB This segment type is reserved but has unspecified
semantics. Programs that contain an array element of
this type do not conform to the ABI.
PT_PHDR The array element, if present, specifies the location
and size of the program header table itself, both in
the file and in the memory image of the program. This
segment type may not occur more than once in a file.
Moreover, it may only occur if the program header
table is part of the memory image of the program. If
it is present, it must precede any loadable segment
entry.
PT_LOPROC Values greater than or equal to PT_HIPROC are reserved
for processor-specific semantics.
PT_HIPROC Values less than or equal to PT_LOPROC are reserved
for processor-specific semantics. PT_GNU_STACK GNU
extension which is used by the Linux kernel to control
the state of the stack via the flags set in the
p_flags member.
p_offset This member holds the offset from the beginning of the file at
which the first byte of the segment resides.
p_vaddr This member holds the virtual address at which the first byte of
the segment resides in memory.
p_paddr On systems for which physical addressing is relevant, this member
is reserved for the segment's physical address. Under BSD this
member is not used and must be zero.
p_filesz This member holds the number of bytes in the file image of the
segment. It may be zero.
p_memsz This member holds the number of bytes in the memory image of the
segment. It may be zero.
p_flags This member holds a bitmask of flags relevant to the segment:
PF_X An executable segment.
PF_W A writable segment.
PF_R A readable segment.
A text segment commonly has the flags PF_X and PF_R. A data
segment commonly has PF_X, PF_W and PF_R.
p_align This member holds the value to which the segments are aligned in
memory and in the file. Loadable process segments must have
congruent values for p_vaddr and p_offset, modulo the page size.
Values of zero and one mean no alignment is required. Otherwise,
p_align should be a positive, integral power of two, and p_vaddr
should equal p_offset, modulo p_align.
A file's section header table lets one locate all the file's sections. The
section header table is an array of Elf32_Shdr or Elf64_Shdr structures. The
ELF header's e_shoff member gives the byte offset from the beginning of the
file to the section header table. e_shnum holds the number of entries the
section header table contains. e_shentsize holds the size in bytes of each
entry.
A section header table index is a subscript into this array. Some section
header table indices are reserved: the initial entry and the indices between
SHN_LORESERVE and SHN_HIRESERVE. The initial entry is used in ELF extensions
for e_phnum, e_shnum and e_strndx; in other cases, each field in the initial
entry is set to zero. An object file does not have sections for these special
indices:
SHN_UNDEF This value marks an undefined, missing, irrelevant or
otherwise meaningless section reference.
SHN_LORESERVE This value specifies the lower bound of the range of
reserved indices.
SHN_LOPROC Values greater than or equal to SHN_HIPROC are reserved
for processor-specific semantics.
SHN_HIPROC Values less than or equal to SHN_LOPROC are reserved for
processor-specific semantics.
SHN_ABS This value specifies the absolute value for the
corresponding reference. For example, a symbol defined
relative to section number SHN_ABS has an absolute value
and is not affected by relocation.
SHN_COMMON Symbols defined relative to this section are common
symbols, such as FORTRAN COMMON or unallocated C external
variables.
SHN_HIRESERVE This value specifies the upper bound of the range of
reserved indices. The system reserves indices between
SHN_LORESERVE and SHN_HIRESERVE, inclusive. The section
header table does not contain entries for the reserved
indices.
The section header has the following structure:
typedef struct {
uint32_t sh_name;
uint32_t sh_type;
uint32_t sh_flags;
Elf32_Addr sh_addr;
Elf32_Off sh_offset;
uint32_t sh_size;
uint32_t sh_link;
uint32_t sh_info;
uint32_t sh_addralign;
uint32_t sh_entsize;
} Elf32_Shdr;
typedef struct {
uint32_t sh_name;
uint32_t sh_type;
uint64_t sh_flags;
Elf64_Addr sh_addr;
Elf64_Off sh_offset;
uint64_t sh_size;
uint32_t sh_link;
uint32_t sh_info;
uint64_t sh_addralign;
uint64_t sh_entsize;
} Elf64_Shdr;
No real differences exist between the 32-bit and 64-bit section headers.
sh_name This member specifies the name of the section. Its value is an
index into the section header string table section, giving the
location of a null-terminated string.
sh_type This member categorizes the section's contents and semantics.
SHT_NULL This value marks the section header as inactive. It
does not have an associated section. Other members
of the section header have undefined values.
SHT_PROGBITS This section holds information defined by the
program, whose format and meaning are determined
solely by the program.
SHT_SYMTAB This section holds a symbol table. Typically,
SHT_SYMTAB provides symbols for link editing, though
it may also be used for dynamic linking. As a
complete symbol table, it may contain many symbols
unnecessary for dynamic linking. An object file can
also contain a SHT_DYNSYM section.
SHT_STRTAB This section holds a string table. An object file
may have multiple string table sections.
SHT_RELA This section holds relocation entries with explicit
addends, such as type Elf32_Rela for the 32-bit class
of object files. An object may have multiple
relocation sections.
SHT_HASH This section holds a symbol hash table. An object
participating in dynamic linking must contain a
symbol hash table. An object file may have only one
hash table.
SHT_DYNAMIC This section holds information for dynamic linking.
An object file may have only one dynamic section.
SHT_NOTE This section holds information that marks the file in
some way.
SHT_NOBITS A section of this type occupies no space in the file
but otherwise resembles SHT_PROGBITS. Although this
section contains no bytes, the sh_offset member
contains the conceptual file offset.
SHT_REL This section holds relocation offsets without
explicit addends, such as type Elf32_Rel for the
32-bit class of object files. An object file may
have multiple relocation sections.
SHT_SHLIB This section is reserved but has unspecified
semantics.
SHT_DYNSYM This section holds a minimal set of dynamic linking
symbols. An object file can also contain a
SHT_SYMTAB section.
SHT_LOPROC This value up to and including SHT_HIPROC is reserved
for processor-specific semantics.
SHT_HIPROC This value down to and including SHT_LOPROC is
reserved for processor-specific semantics.
SHT_LOUSER This value specifies the lower bound of the range of
indices reserved for application programs.
SHT_HIUSER This value specifies the upper bound of the range of
indices reserved for application programs. Section
types between SHT_LOUSER and SHT_HIUSER may be used
by the application, without conflicting with current
or future system-defined section types.
sh_flags Sections support one-bit flags that describe miscellaneous
attributes. If a flag bit is set in sh_flags, the attribute is "on"
for the section. Otherwise, the attribute is "off" or does not
apply. Undefined attributes are set to zero.
SHF_WRITE This section contains data that should be writable
during process execution.
SHF_ALLOC This section occupies memory during process
execution. Some control sections do not reside in
the memory image of an object file. This attribute
is off for those sections.
SHF_EXECINSTR This section contains executable machine
instructions.
SHF_MASKPROC All bits included in this mask are reserved for
processor-specific semantics.
sh_addr If this section appears in the memory image of a process, this
member holds the address at which the section's first byte should
reside. Otherwise, the member contains zero.
sh_offset This member's value holds the byte offset from the beginning of the
file to the first byte in the section. One section type,
SHT_NOBITS, occupies no space in the file, and its sh_offset member
locates the conceptual placement in the file.
sh_size This member holds the section's size in bytes. Unless the section
type is SHT_NOBITS, the section occupies sh_size bytes in the file.
A section of type SHT_NOBITS may have a nonzero size, but it
occupies no space in the file.
sh_link This member holds a section header table index link, whose
interpretation depends on the section type.
sh_info This member holds extra information, whose interpretation depends on
the section type.
sh_addralign
Some sections have address alignment constraints. If a section
holds a doubleword, the system must ensure doubleword alignment for
the entire section. That is, the value of sh_addr must be congruent
to zero, modulo the value of sh_addralign. Only zero and positive
integral powers of two are allowed. Values of zero or one mean the
section has no alignment constraints.
sh_entsize
Some sections hold a table of fixed-sized entries, such as a symbol
table. For such a section, this member gives the size in bytes for
each entry. This member contains zero if the section does not hold
a table of fixed-size entries.
Various sections hold program and control information:
.bss This section holds uninitialized data that contributes to the
program's memory image. By definition, the system initializes the
data with zeros when the program begins to run. This section is of
type SHT_NOBITS. The attribute types are SHF_ALLOC and SHF_WRITE.
.comment This section holds version control information. This section is of
type SHT_PROGBITS. No attribute types are used.
.ctors This section holds initialized pointers to the C++ constructor
functions. This section is of type SHT_PROGBITS. The attribute
types are SHF_ALLOC and SHF_WRITE.
.data This section holds initialized data that contribute to the program's
memory image. This section is of type SHT_PROGBITS. The attribute
types are SHF_ALLOC and SHF_WRITE.
.data1 This section holds initialized data that contribute to the program's
memory image. This section is of type SHT_PROGBITS. The attribute
types are SHF_ALLOC and SHF_WRITE.
.debug This section holds information for symbolic debugging. The contents
are unspecified. This section is of type SHT_PROGBITS. No
attribute types are used.
.dtors This section holds initialized pointers to the C++ destructor
functions. This section is of type SHT_PROGBITS. The attribute
types are SHF_ALLOC and SHF_WRITE.
.dynamic This section holds dynamic linking information. The section's
attributes will include the SHF_ALLOC bit. Whether the SHF_WRITE
bit is set is processor-specific. This section is of type
SHT_DYNAMIC. See the attributes above.
.dynstr This section holds strings needed for dynamic linking, most commonly
the strings that represent the names associated with symbol table
entries. This section is of type SHT_STRTAB. The attribute type
used is SHF_ALLOC.
.dynsym This section holds the dynamic linking symbol table. This section
is of type SHT_DYNSYM. The attribute used is SHF_ALLOC.
.fini This section holds executable instructions that contribute to the
process termination code. When a program exits normally the system
arranges to execute the code in this section. This section is of
type SHT_PROGBITS. The attributes used are SHF_ALLOC and
SHF_EXECINSTR.
.gnu.version
This section holds the version symbol table, an array of ElfN_Half
elements. This section is of type SHT_GNU_versym. The attribute
type used is SHF_ALLOC.
.gnu.version_d
This section holds the version symbol definitions, a table of
ElfN_Verdef structures. This section is of type SHT_GNU_verdef.
The attribute type used is SHF_ALLOC.
.gnu.version_r
This section holds the version symbol needed elements, a table of
ElfN_Verneed structures. This section is of type SHT_GNU_versym.
The attribute type used is SHF_ALLOC.
.got This section holds the global offset table. This section is of type
SHT_PROGBITS. The attributes are processor specific.
.hash This section holds a symbol hash table. This section is of type
SHT_HASH. The attribute used is SHF_ALLOC.
.init This section holds executable instructions that contribute to the
process initialization code. When a program starts to run the
system arranges to execute the code in this section before calling
the main program entry point. This section is of type SHT_PROGBITS.
The attributes used are SHF_ALLOC and SHF_EXECINSTR.
.interp This section holds the pathname of a program interpreter. If the
file has a loadable segment that includes the section, the section's
attributes will include the SHF_ALLOC bit. Otherwise, that bit will
be off. This section is of type SHT_PROGBITS.
.line This section holds line number information for symbolic debugging,
which describes the correspondence between the program source and
the machine code. The contents are unspecified. This section is of
type SHT_PROGBITS. No attribute types are used.
.note This section holds information in the "Note Section" format. This
section is of type SHT_NOTE. No attribute types are used. OpenBSD
native executables usually contain a .note.openbsd.ident section to
identify themselves, for the kernel to bypass any compatibility ELF
binary emulation tests when loading the file.
.note.GNU-stack
This section is used in Linux object files for declaring stack
attributes. This section is of type SHT_PROGBITS. The only
attribute used is SHF_EXECINSTR. This indicates to the GNU linker
that the object file requires an executable stack.
.plt This section holds the procedure linkage table. This section is of
type SHT_PROGBITS. The attributes are processor specific.
.relNAME This section holds relocation information as described below. If
the file has a loadable segment that includes relocation, the
section's attributes will include the SHF_ALLOC bit. Otherwise the
bit will be off. By convention, "NAME" is supplied by the section
to which the relocations apply. Thus a relocation section for .text
normally would have the name .rel.text. This section is of type
SHT_REL.
.relaNAME This section holds relocation information as described below. If
the file has a loadable segment that includes relocation, the
section's attributes will include the SHF_ALLOC bit. Otherwise the
bit will be off. By convention, "NAME" is supplied by the section
to which the relocations apply. Thus a relocation section for .text
normally would have the name .rela.text. This section is of type
SHT_RELA.
.rodata This section holds read-only data that typically contributes to a
nonwritable segment in the process image. This section is of type
SHT_PROGBITS. The attribute used is SHF_ALLOC.
.rodata1 This section holds read-only data that typically contributes to a
nonwritable segment in the process image. This section is of type
SHT_PROGBITS. The attribute used is SHF_ALLOC.
.shstrtab This section holds section names. This section is of type
SHT_STRTAB. No attribute types are used.
.strtab This section holds strings, most commonly the strings that represent
the names associated with symbol table entries. If the file has a
loadable segment that includes the symbol string table, the
section's attributes will include the SHF_ALLOC bit. Otherwise the
bit will be off. This section is of type SHT_STRTAB.
.symtab This section holds a symbol table. If the file has a loadable
segment that includes the symbol table, the section's attributes
will include the SHF_ALLOC bit. Otherwise the bit will be off.
This section is of type SHT_SYMTAB.
.text This section holds the "text", or executable instructions, of a
program. This section is of type SHT_PROGBITS. The attributes used
are SHF_ALLOC and SHF_EXECINSTR.
String table sections hold null-terminated character sequences, commonly
called strings. The object file uses these strings to represent symbol and
section names. One references a string as an index into the string table
section. The first byte, which is index zero, is defined to hold a null byte
('\0'). Similarly, a string table's last byte is defined to hold a null byte,
ensuring null termination for all strings.
An object file's symbol table holds information needed to locate and relocate
a program's symbolic definitions and references. A symbol table index is a
subscript into this array.
typedef struct {
uint32_t st_name;
Elf32_Addr st_value;
uint32_t st_size;
unsigned char st_info;
unsigned char st_other;
uint16_t st_shndx;
} Elf32_Sym;
typedef struct {
uint32_t st_name;
unsigned char st_info;
unsigned char st_other;
uint16_t st_shndx;
Elf64_Addr st_value;
uint64_t st_size;
} Elf64_Sym;
The 32-bit and 64-bit versions have the same members, just in a different
order.
st_name This member holds an index into the object file's symbol string
table, which holds character representations of the symbol names.
If the value is nonzero, it represents a string table index that
gives the symbol name. Otherwise, the symbol table has no name.
st_value This member gives the value of the associated symbol.
st_size Many symbols have associated sizes. This member holds zero if the
symbol has no size or an unknown size.
st_info This member specifies the symbol's type and binding attributes:
STT_NOTYPE The symbol's type is not defined.
STT_OBJECT The symbol is associated with a data object.
STT_FUNC The symbol is associated with a function or other
executable code.
STT_SECTION The symbol is associated with a section. Symbol table
entries of this type exist primarily for relocation and
normally have STB_LOCAL bindings.
STT_FILE By convention, the symbol's name gives the name of the
source file associated with the object file. A file
symbol has STB_LOCAL bindings, its section index is
SHN_ABS, and it precedes the other STB_LOCAL symbols of
the file, if it is present.
STT_LOPROC This value up to and including STT_HIPROC is reserved
for processor-specific semantics.
STT_HIPROC This value down to and including STT_LOPROC is reserved
for processor-specific semantics.
STB_LOCAL Local symbols are not visible outside the object file
containing their definition. Local symbols of the same
name may exist in multiple files without interfering
with each other.
STB_GLOBAL Global symbols are visible to all object files being
combined. One file's definition of a global symbol will
satisfy another file's undefined reference to the same
symbol.
STB_WEAK Weak symbols resemble global symbols, but their
definitions have lower precedence.
STB_LOPROC This value up to and including STB_HIPROC is reserved
for processor-specific semantics.
STB_HIPROC This value down to and including STB_LOPROC is reserved
for processor-specific semantics.
There are macros for packing and unpacking the binding
and type fields:
ELF32_ST_BIND(info) or ELF64_ST_BIND(info) extract a
binding from an st_info value.
ELF32_ST_TYPE(info) or ELF64_ST_TYPE(info)
extract a type from an st_info value.
ELF32_ST_INFO(bind, type) or ELF64_ST_INFO(bind, type)
convert a binding and a type into an st_info value.
st_other This member defines the symbol visibility.
STV_DEFAULT Default symbol visibility rules.
STV_INTERNAL Processor-specific hidden class.
STV_HIDDEN Symbol is unavailable in other modules.
STV_PROTECTED Not preemptible, not exported.
There are macros for extracting the visibility type:
ELF32_ST_VISIBILITY(other) or ELF64_ST_VISIBILITY(other)
st_shndx Every symbol table entry is "defined" in relation to some section.
This member holds the relevant section header table index.
Relocation is the process of connecting symbolic references with symbolic
definitions. Relocatable files must have information that describes how to
modify their section contents, thus allowing executable and shared object
files to hold the right information for a process's program image. Relocation
entries are these data.
Relocation structures that do not need an addend:
typedef struct {
Elf32_Addr r_offset;
uint32_t r_info;
} Elf32_Rel;
typedef struct {
Elf64_Addr r_offset;
uint64_t r_info;
} Elf64_Rel;
Relocation structures that need an addend:
typedef struct {
Elf32_Addr r_offset;
uint32_t r_info;
int32_t r_addend;
} Elf32_Rela;
typedef struct {
Elf64_Addr r_offset;
uint64_t r_info;
int64_t r_addend;
} Elf64_Rela;
r_offset This member gives the location at which to apply the relocation
action. For a relocatable file, the value is the byte offset from
the beginning of the section to the storage unit affected by the
relocation. For an executable file or shared object, the value is
the virtual address of the storage unit affected by the
relocation.
r_info This member gives both the symbol table index with respect to
which the relocation must be made and the type of relocation to
apply. Relocation types are processor specific. When the text
refers to a relocation entry's relocation type or symbol table
index, it means the result of applying ELF_[32|64]_R_TYPE or
ELF[32|64]_R_SYM, respectively, to the entry's r_info member.
r_addend This member specifies a constant addend used to compute the value
to be stored into the relocatable field.
The .dynamic section contains a series of structures that hold relevant
dynamic linking information. The d_tag member controls the interpretation of
d_un.
typedef struct {
Elf32_Sword d_tag;
union {
Elf32_Word d_val;
Elf32_Addr d_ptr;
} d_un;
} Elf32_Dyn;
extern Elf32_Dyn _DYNAMIC[];
typedef struct {
Elf64_Sxword d_tag;
union {
Elf64_Xword d_val;
Elf64_Addr d_ptr;
} d_un;
} Elf64_Dyn;
extern Elf64_Dyn _DYNAMIC[];
d_tag This member may have any of the following values:
DT_NULL Marks end of dynamic section
DT_NEEDED String table offset to name of a needed library
DT_PLTRELSZ Size in bytes of PLT relocs
DT_PLTGOT Address of PLT and/or GOT
DT_HASH Address of symbol hash table
DT_STRTAB Address of string table
DT_SYMTAB Address of symbol table
DT_RELA Address of Rela relocs table
DT_RELASZ Size in bytes of Rela table
DT_RELAENT Size in bytes of a Rela table entry
DT_STRSZ Size in bytes of string table
DT_SYMENT Size in bytes of a symbol table entry
DT_INIT Address of the initialization function
DT_FINI Address of the termination function
DT_SONAME String table offset to name of shared object
DT_RPATH String table offset to library search path (deprecated)
DT_SYMBOLIC Alert linker to search this shared object before the
executable for symbols
DT_REL Address of Rel relocs table
DT_RELSZ Size in bytes of Rel table
DT_RELENT Size in bytes of a Rel table entry
DT_PLTREL Type of reloc the PLT refers (Rela or Rel)
DT_DEBUG Undefined use for debugging
DT_TEXTREL Absence of this indicates no relocs should apply to a
nonwritable segment
DT_JMPREL Address of reloc entries solely for the PLT
DT_BIND_NOW Instruct dynamic linker to process all relocs before
transferring control to the executable
DT_RUNPATH String table offset to library search path
DT_LOPROC Start of processor-specific semantics
DT_HIPROC End of processor-specific semantics
d_val This member represents integer values with various interpretations.
d_ptr This member represents program virtual addresses. When interpreting
these addresses, the actual address should be computed based on the
original file value and memory base address. Files do not contain
relocation entries to fixup these addresses.
_DYNAMIC Array containing all the dynamic structures in the .dynamic section.
This is automatically populated by the linker.
ELF first appeared in System V. The ELF format is an adopted standard.
The extensions for e_phnum, e_shnum and e_strndx respectively are Linux
extensions. Sun, BSD and AMD64 also support them; for further information,
look under SEE ALSO.
as(1), gdb(1), ld(1), objdump(1), execve(2), core(5)
Hewlett-Packard, Elf-64 Object File Format.
Santa Cruz Operation, System V Application Binary Interface.
UNIX System Laboratories, "Object Files", Executable and Linking Format (ELF).
Sun Microsystems, Linker and Libraries Guide.
AMD64 ABI Draft, System V Application Binary Interface AMD64 Architecture
Processor Supplement.
This page is part of release 3.32 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can be found
at http://www.kernel.org/doc/man-pages/.
Linux 2010-06-19 ELF(5)
HTML rendering created 2010-12-03 by Michael Kerrisk, author of The Linux Programming Interface