git bisect <subcommand> <options>
The command takes various subcommands, and different options depending
on the subcommand:
git bisect help
git bisect start [<bad> [<good>...]] [--] [<paths>...]
git bisect bad [<rev>]
git bisect good [<rev>...]
git bisect skip [(<rev>|<range>)...]
git bisect reset [<commit>]
git bisect visualize
git bisect replay <logfile>
git bisect log
git bisect run <cmd>...
This command uses git rev-list --bisect to help drive the
binary search process to find which change introduced a bug, given an
old "good" commit object name and a later "bad" commit object name.
Use "git bisect" to get a short usage description, and "git bisect
help" or "git bisect -h" to get a long usage description.
Basic bisect commands: start, bad, good
Using the Linux kernel tree as an example, basic use of the bisect
command is as follows:
$ git bisect start
$ git bisect bad # Current version is bad
$ git bisect good v2.6.13-rc2 # v2.6.13-rc2 was the last version
# tested that was good
When you have specified at least one bad and one good version, the
command bisects the revision tree and outputs something similar to
Bisecting: 675 revisions left to test after this
The state in the middle of the set of revisions is then checked out.
You would now compile that kernel and boot it. If the booted kernel
works correctly, you would then issue the following command:
$ git bisect good # this one is good
The output of this command would be something similar to the following:
Bisecting: 337 revisions left to test after this
You keep repeating this process, compiling the tree, testing it, and
depending on whether it is good or bad issuing the command "git bisect good"
or "git bisect bad" to ask for the next bisection.
Eventually there will be no more revisions left to bisect, and you
will have been left with the first bad kernel revision in "refs/bisect/bad".
After a bisect session, to clean up the bisection state and return to
the original HEAD, issue the following command:
By default, this will return your tree to the commit that was checked
out before git bisect start. (A new git bisect start will also do
that, as it cleans up the old bisection state.)
With an optional argument, you can return to a different commit
$ git bisect reset <commit>
For example, git bisect reset HEAD will leave you on the current
bisection commit and avoid switching commits at all, while git bisect
reset bisect/bad will check out the first bad revision.
To see the currently remaining suspects in gitk, issue the following
command during the bisection process:
view may also be used as a synonym for visualize.
If the DISPLAY environment variable is not set, git log is used
instead. You can also give command line options such as -p and
Bisect log and bisect replay
After having marked revisions as good or bad, issue the following
command to show what has been done so far:
If you discover that you made a mistake in specifying the status of a
revision, you can save the output of this command to a file, edit it to
remove the incorrect entries, and then issue the following commands to
return to a corrected state:
$ git bisect reset
$ git bisect replay that-file
Avoiding testing a commit
If, in the middle of a bisect session, you know that the next suggested
revision is not a good one to test (e.g. the change the commit
introduces is known not to work in your environment and you know it
does not have anything to do with the bug you are chasing), you may
want to find a nearby commit and try that instead.
$ git bisect good/bad # previous round was good or bad.
Bisecting: 337 revisions left to test after this
$ git bisect visualize # oops, that is uninteresting.
$ git reset --hard HEAD~3 # try 3 revisions before what
# was suggested
Then compile and test the chosen revision, and afterwards mark
the revision as good or bad in the usual manner.
Instead of choosing by yourself a nearby commit, you can ask git
to do it for you by issuing the command:
$ git bisect skip # Current version cannot be tested
But git may eventually be unable to tell the first bad commit among
a bad commit and one or more skipped commits.
You can even skip a range of commits, instead of just one commit,
using the "<commit1>..<commit2>" notation. For example:
$ git bisect skip v2.5..v2.6
This tells the bisect process that no commit after v2.5, up to and
including v2.6, should be tested.
Note that if you also want to skip the first commit of the range you
would issue the command:
$ git bisect skip v2.5 v2.5..v2.6
This tells the bisect process that the commits between v2.5 included
and v2.6 included should be skipped.
Cutting down bisection by giving more parameters to bisect start
You can further cut down the number of trials, if you know what part of
the tree is involved in the problem you are tracking down, by specifying
path parameters when issuing the bisect start command:
$ git bisect start -- arch/i386 include/asm-i386
If you know beforehand more than one good commit, you can narrow the
bisect space down by specifying all of the good commits immediately after
the bad commit when issuing the bisect start command:
$ git bisect start v2.6.20-rc6 v2.6.20-rc4 v2.6.20-rc1 --
# v2.6.20-rc6 is bad
# v2.6.20-rc4 and v2.6.20-rc1 are good
If you have a script that can tell if the current source code is good
or bad, you can bisect by issuing the command:
$ git bisect run my_script arguments
Note that the script (my_script in the above example) should
exit with code 0 if the current source code is good, and exit with a
code between 1 and 127 (inclusive), except 125, if the current
source code is bad.
Any other exit code will abort the bisect process. It should be noted
that a program that terminates via "exit(-1)" leaves $? = 255, (see the
exit(3) manual page), as the value is chopped with "& 0377".
The special exit code 125 should be used when the current source code
cannot be tested. If the script exits with this code, the current
revision will be skipped (see git bisect skip above).
You may often find that during a bisect session you want to have
temporary modifications (e.g. s/#define DEBUG 0/#define DEBUG 1/ in a
header file, or "revision that does not have this commit needs this
patch applied to work around another problem this bisection is not
interested in") applied to the revision being tested.
To cope with such a situation, after the inner git bisect finds the
next revision to test, the script can apply the patch
before compiling, run the real test, and afterwards decide if the
revision (possibly with the needed patch) passed the test and then
rewind the tree to the pristine state. Finally the script should exit
with the status of the real test to let the "git bisect run" command loop
determine the eventual outcome of the bisect session.