// SPDX-License-Identifier: GPL-2.0 /* * xHCI host controller driver PCI Bus Glue. * * Copyright (C) 2008 Intel Corp. * * Author: Sarah Sharp * Some code borrowed from the Linux EHCI driver. */ #include #include #include #include #include #include #include "xhci.h" #include "xhci-trace.h" #include "xhci-pci.h" #define SSIC_PORT_NUM 2 #define SSIC_PORT_CFG2 0x880c #define SSIC_PORT_CFG2_OFFSET 0x30 #define PROG_DONE (1 << 30) #define SSIC_PORT_UNUSED (1 << 31) #define SPARSE_DISABLE_BIT 17 #define SPARSE_CNTL_ENABLE 0xC12C /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 0x1100 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_EJ168 0x7023 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1 #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 #define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 #define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI 0x15b5 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI 0x15b6 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI 0x15c1 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI 0x15db #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI 0x15d4 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI 0x15e9 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0 #define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI 0x8a13 #define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI 0x54ed #define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242 #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142 #define PCI_DEVICE_ID_ASMEDIA_3242_XHCI 0x3242 static const char hcd_name[] = "xhci_hcd"; static struct hc_driver __read_mostly xhci_pci_hc_driver; static int xhci_pci_setup(struct usb_hcd *hcd); static int xhci_pci_run(struct usb_hcd *hcd); static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, struct usb_tt *tt, gfp_t mem_flags); static const struct xhci_driver_overrides xhci_pci_overrides __initconst = { .reset = xhci_pci_setup, .start = xhci_pci_run, .update_hub_device = xhci_pci_update_hub_device, }; static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) { struct usb_hcd *hcd = xhci_to_hcd(xhci); if (hcd->msix_enabled) { struct pci_dev *pdev = to_pci_dev(hcd->self.controller); /* for now, the driver only supports one primary interrupter */ synchronize_irq(pci_irq_vector(pdev, 0)); } } /* Free any IRQs and disable MSI-X */ static void xhci_cleanup_msix(struct xhci_hcd *xhci) { struct usb_hcd *hcd = xhci_to_hcd(xhci); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); /* return if using legacy interrupt */ if (hcd->irq > 0) return; free_irq(pci_irq_vector(pdev, 0), xhci_to_hcd(xhci)); pci_free_irq_vectors(pdev); hcd->msix_enabled = 0; } /* Try enabling MSI-X with MSI and legacy IRQ as fallback */ static int xhci_try_enable_msi(struct usb_hcd *hcd) { struct pci_dev *pdev = to_pci_dev(hcd->self.controller); struct xhci_hcd *xhci = hcd_to_xhci(hcd); int ret; /* * Some Fresco Logic host controllers advertise MSI, but fail to * generate interrupts. Don't even try to enable MSI. */ if (xhci->quirks & XHCI_BROKEN_MSI) goto legacy_irq; /* unregister the legacy interrupt */ if (hcd->irq) free_irq(hcd->irq, hcd); hcd->irq = 0; /* * calculate number of MSI-X vectors supported. * - HCS_MAX_INTRS: the max number of interrupts the host can handle, * with max number of interrupters based on the xhci HCSPARAMS1. * - num_online_cpus: maximum MSI-X vectors per CPUs core. * Add additional 1 vector to ensure always available interrupt. */ xhci->nvecs = min(num_online_cpus() + 1, HCS_MAX_INTRS(xhci->hcs_params1)); /* TODO: Check with MSI Soc for sysdev */ xhci->nvecs = pci_alloc_irq_vectors(pdev, 1, xhci->nvecs, PCI_IRQ_MSIX | PCI_IRQ_MSI); if (xhci->nvecs < 0) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "failed to allocate IRQ vectors"); goto legacy_irq; } ret = request_irq(pci_irq_vector(pdev, 0), xhci_msi_irq, 0, "xhci_hcd", xhci_to_hcd(xhci)); if (ret) goto free_irq_vectors; hcd->msi_enabled = 1; hcd->msix_enabled = pdev->msix_enabled; return 0; free_irq_vectors: xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable %s interrupt", pdev->msix_enabled ? "MSI-X" : "MSI"); pci_free_irq_vectors(pdev); legacy_irq: if (!pdev->irq) { xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n"); return -EINVAL; } if (!strlen(hcd->irq_descr)) snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); /* fall back to legacy interrupt */ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); if (ret) { xhci_err(xhci, "request interrupt %d failed\n", pdev->irq); return ret; } hcd->irq = pdev->irq; return 0; } static int xhci_pci_run(struct usb_hcd *hcd) { int ret; if (usb_hcd_is_primary_hcd(hcd)) { ret = xhci_try_enable_msi(hcd); if (ret) return ret; } return xhci_run(hcd); } static void xhci_pci_stop(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); xhci_stop(hcd); if (usb_hcd_is_primary_hcd(hcd)) xhci_cleanup_msix(xhci); } /* called after powerup, by probe or system-pm "wakeup" */ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) { /* * TODO: Implement finding debug ports later. * TODO: see if there are any quirks that need to be added to handle * new extended capabilities. */ /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ if (!pci_set_mwi(pdev)) xhci_dbg(xhci, "MWI active\n"); xhci_dbg(xhci, "Finished xhci_pci_reinit\n"); return 0; } static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(dev); struct xhci_driver_data *driver_data; const struct pci_device_id *id; id = pci_match_id(to_pci_driver(pdev->dev.driver)->id_table, pdev); if (id && id->driver_data) { driver_data = (struct xhci_driver_data *)id->driver_data; xhci->quirks |= driver_data->quirks; } /* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && pdev->revision == 0x0) { xhci->quirks |= XHCI_RESET_EP_QUIRK; xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "XHCI_RESET_EP_QUIRK for this evaluation HW is deprecated"); } if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && pdev->revision == 0x4) { xhci->quirks |= XHCI_SLOW_SUSPEND; xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Fresco Logic xHC revision %u" "must be suspended extra slowly", pdev->revision); } if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) xhci->quirks |= XHCI_BROKEN_STREAMS; /* Fresco Logic confirms: all revisions of this chip do not * support MSI, even though some of them claim to in their PCI * capabilities. */ xhci->quirks |= XHCI_BROKEN_MSI; xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Fresco Logic revision %u " "has broken MSI implementation", pdev->revision); xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009) xhci->quirks |= XHCI_BROKEN_STREAMS; if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100) xhci->quirks |= XHCI_TRUST_TX_LENGTH; if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; /* AMD PLL quirk */ if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check()) xhci->quirks |= XHCI_AMD_PLL_FIX; if (pdev->vendor == PCI_VENDOR_ID_AMD && (pdev->device == 0x145c || pdev->device == 0x15e0 || pdev->device == 0x15e1 || pdev->device == 0x43bb)) xhci->quirks |= XHCI_SUSPEND_DELAY; if (pdev->vendor == PCI_VENDOR_ID_AMD && (pdev->device == 0x15e0 || pdev->device == 0x15e1)) xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND; if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) { xhci->quirks |= XHCI_DISABLE_SPARSE; xhci->quirks |= XHCI_RESET_ON_RESUME; } if (pdev->vendor == PCI_VENDOR_ID_AMD) xhci->quirks |= XHCI_TRUST_TX_LENGTH; if ((pdev->vendor == PCI_VENDOR_ID_AMD) && ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) || (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) || (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) || (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1))) xhci->quirks |= XHCI_U2_DISABLE_WAKE; if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI) xhci->quirks |= XHCI_BROKEN_D3COLD_S2I; if (pdev->vendor == PCI_VENDOR_ID_INTEL) { xhci->quirks |= XHCI_LPM_SUPPORT; xhci->quirks |= XHCI_INTEL_HOST; xhci->quirks |= XHCI_AVOID_BEI; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; xhci->quirks |= XHCI_SW_BW_CHECKING; /* * PPT desktop boards DH77EB and DH77DF will power back on after * a few seconds of being shutdown. The fix for this is to * switch the ports from xHCI to EHCI on shutdown. We can't use * DMI information to find those particular boards (since each * vendor will change the board name), so we have to key off all * PPT chipsets. */ xhci->quirks |= XHCI_SPURIOUS_REBOOT; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) { xhci->quirks |= XHCI_SPURIOUS_REBOOT; xhci->quirks |= XHCI_SPURIOUS_WAKEUP; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) xhci->quirks |= XHCI_SSIC_PORT_UNUSED; if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) xhci->quirks |= XHCI_INTEL_USB_ROLE_SW; if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) xhci->quirks |= XHCI_MISSING_CAS; if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI)) xhci->quirks |= XHCI_RESET_TO_DEFAULT; if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI)) xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_EJ168) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_TRUST_TX_LENGTH; xhci->quirks |= XHCI_BROKEN_STREAMS; } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0014) { xhci->quirks |= XHCI_TRUST_TX_LENGTH; xhci->quirks |= XHCI_ZERO_64B_REGS; } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0015) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_ZERO_64B_REGS; } if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */ if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS; if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) xhci->quirks |= XHCI_LPM_SUPPORT; if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) { /* * try to tame the ASMedia 1042 controller which reports 0.96 * but appears to behave more like 1.0 */ xhci->quirks |= XHCI_SPURIOUS_SUCCESS; xhci->quirks |= XHCI_BROKEN_STREAMS; } if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) { xhci->quirks |= XHCI_TRUST_TX_LENGTH; xhci->quirks |= XHCI_NO_64BIT_SUPPORT; } if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && (pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI || pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI || pdev->device == PCI_DEVICE_ID_ASMEDIA_3242_XHCI)) xhci->quirks |= XHCI_NO_64BIT_SUPPORT; if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL; if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM || pdev->vendor == PCI_VENDOR_ID_CAVIUM) && pdev->device == 0x9026) xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT; if (pdev->vendor == PCI_VENDOR_ID_AMD && (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 || pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4)) xhci->quirks |= XHCI_NO_SOFT_RETRY; if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) { xhci->quirks |= XHCI_ZHAOXIN_HOST; xhci->quirks |= XHCI_LPM_SUPPORT; if (pdev->device == 0x9202) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH; } if (pdev->device == 0x9203) xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH; } /* xHC spec requires PCI devices to support D3hot and D3cold */ if (xhci->hci_version >= 0x120) xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Resetting on resume"); } #ifdef CONFIG_ACPI static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { static const guid_t intel_dsm_guid = GUID_INIT(0xac340cb7, 0xe901, 0x45bf, 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23); union acpi_object *obj; obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1, NULL); ACPI_FREE(obj); } static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_hub *rhub = &xhci->usb3_rhub; int ret; int i; /* This is not the usb3 roothub we are looking for */ if (hcd != rhub->hcd) return; if (hdev->maxchild > rhub->num_ports) { dev_err(&hdev->dev, "USB3 roothub port number mismatch\n"); return; } for (i = 0; i < hdev->maxchild; i++) { ret = usb_acpi_port_lpm_incapable(hdev, i); dev_dbg(&hdev->dev, "port-%d disable U1/U2 _DSM: %d\n", i + 1, ret); if (ret >= 0) { rhub->ports[i]->lpm_incapable = ret; continue; } } } #else static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) { } #endif /* CONFIG_ACPI */ /* called during probe() after chip reset completes */ static int xhci_pci_setup(struct usb_hcd *hcd) { struct xhci_hcd *xhci; struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval; xhci = hcd_to_xhci(hcd); if (!xhci->sbrn) pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); /* imod_interval is the interrupt moderation value in nanoseconds. */ xhci->imod_interval = 40000; retval = xhci_gen_setup(hcd, xhci_pci_quirks); if (retval) return retval; if (!usb_hcd_is_primary_hcd(hcd)) return 0; if (xhci->quirks & XHCI_PME_STUCK_QUIRK) xhci_pme_acpi_rtd3_enable(pdev); xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); /* Find any debug ports */ return xhci_pci_reinit(xhci, pdev); } static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, struct usb_tt *tt, gfp_t mem_flags) { /* Check if acpi claims some USB3 roothub ports are lpm incapable */ if (!hdev->parent) xhci_find_lpm_incapable_ports(hcd, hdev); return xhci_update_hub_device(hcd, hdev, tt, mem_flags); } /* * We need to register our own PCI probe function (instead of the USB core's * function) in order to create a second roothub under xHCI. */ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { int retval; struct xhci_hcd *xhci; struct usb_hcd *hcd; struct xhci_driver_data *driver_data; struct reset_control *reset; driver_data = (struct xhci_driver_data *)id->driver_data; if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { retval = renesas_xhci_check_request_fw(dev, id); if (retval) return retval; } reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL); if (IS_ERR(reset)) return PTR_ERR(reset); reset_control_reset(reset); /* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume(&dev->dev); /* Register the USB 2.0 roothub. * FIXME: USB core must know to register the USB 2.0 roothub first. * This is sort of silly, because we could just set the HCD driver flags * to say USB 2.0, but I'm not sure what the implications would be in * the other parts of the HCD code. */ retval = usb_hcd_pci_probe(dev, &xhci_pci_hc_driver); if (retval) goto put_runtime_pm; /* USB 2.0 roothub is stored in the PCI device now. */ hcd = dev_get_drvdata(&dev->dev); xhci = hcd_to_xhci(hcd); xhci->reset = reset; xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev, pci_name(dev), hcd); if (!xhci->shared_hcd) { retval = -ENOMEM; goto dealloc_usb2_hcd; } retval = xhci_ext_cap_init(xhci); if (retval) goto put_usb3_hcd; retval = usb_add_hcd(xhci->shared_hcd, dev->irq, IRQF_SHARED); if (retval) goto put_usb3_hcd; /* Roothub already marked as USB 3.0 speed */ if (!(xhci->quirks & XHCI_BROKEN_STREAMS) && HCC_MAX_PSA(xhci->hcc_params) >= 4) xhci->shared_hcd->can_do_streams = 1; /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ pm_runtime_put_noidle(&dev->dev); if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0) pm_runtime_forbid(&dev->dev); else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW) pm_runtime_allow(&dev->dev); dma_set_max_seg_size(&dev->dev, UINT_MAX); return 0; put_usb3_hcd: usb_put_hcd(xhci->shared_hcd); dealloc_usb2_hcd: usb_hcd_pci_remove(dev); put_runtime_pm: pm_runtime_put_noidle(&dev->dev); return retval; } static void xhci_pci_remove(struct pci_dev *dev) { struct xhci_hcd *xhci; xhci = hcd_to_xhci(pci_get_drvdata(dev)); xhci->xhc_state |= XHCI_STATE_REMOVING; if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW) pm_runtime_forbid(&dev->dev); if (xhci->shared_hcd) { usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); xhci->shared_hcd = NULL; } /* Workaround for spurious wakeups at shutdown with HSW */ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) pci_set_power_state(dev, PCI_D3hot); usb_hcd_pci_remove(dev); } /* * In some Intel xHCI controllers, in order to get D3 working, * through a vendor specific SSIC CONFIG register at offset 0x883c, * SSIC PORT need to be marked as "unused" before putting xHCI * into D3. After D3 exit, the SSIC port need to be marked as "used". * Without this change, xHCI might not enter D3 state. */ static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 val; void __iomem *reg; int i; for (i = 0; i < SSIC_PORT_NUM; i++) { reg = (void __iomem *) xhci->cap_regs + SSIC_PORT_CFG2 + i * SSIC_PORT_CFG2_OFFSET; /* Notify SSIC that SSIC profile programming is not done. */ val = readl(reg) & ~PROG_DONE; writel(val, reg); /* Mark SSIC port as unused(suspend) or used(resume) */ val = readl(reg); if (suspend) val |= SSIC_PORT_UNUSED; else val &= ~SSIC_PORT_UNUSED; writel(val, reg); /* Notify SSIC that SSIC profile programming is done */ val = readl(reg) | PROG_DONE; writel(val, reg); readl(reg); } } /* * Make sure PME works on some Intel xHCI controllers by writing 1 to clear * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 */ static void xhci_pme_quirk(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); void __iomem *reg; u32 val; reg = (void __iomem *) xhci->cap_regs + 0x80a4; val = readl(reg); writel(val | BIT(28), reg); readl(reg); } static void xhci_sparse_control_quirk(struct usb_hcd *hcd) { u32 reg; reg = readl(hcd->regs + SPARSE_CNTL_ENABLE); reg &= ~BIT(SPARSE_DISABLE_BIT); writel(reg, hcd->regs + SPARSE_CNTL_ENABLE); } static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int ret; /* * Systems with the TI redriver that loses port status change events * need to have the registers polled during D3, so avoid D3cold. */ if (xhci->quirks & XHCI_COMP_MODE_QUIRK) pci_d3cold_disable(pdev); #ifdef CONFIG_SUSPEND /* d3cold is broken, but only when s2idle is used */ if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE && xhci->quirks & (XHCI_BROKEN_D3COLD_S2I)) pci_d3cold_disable(pdev); #endif if (xhci->quirks & XHCI_PME_STUCK_QUIRK) xhci_pme_quirk(hcd); if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) xhci_ssic_port_unused_quirk(hcd, true); if (xhci->quirks & XHCI_DISABLE_SPARSE) xhci_sparse_control_quirk(hcd); ret = xhci_suspend(xhci, do_wakeup); /* synchronize irq when using MSI-X */ xhci_msix_sync_irqs(xhci); if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED)) xhci_ssic_port_unused_quirk(hcd, false); return ret; } static int xhci_pci_resume(struct usb_hcd *hcd, pm_message_t msg) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval = 0; reset_control_reset(xhci->reset); /* The BIOS on systems with the Intel Panther Point chipset may or may * not support xHCI natively. That means that during system resume, it * may switch the ports back to EHCI so that users can use their * keyboard to select a kernel from GRUB after resume from hibernate. * * The BIOS is supposed to remember whether the OS had xHCI ports * enabled before resume, and switch the ports back to xHCI when the * BIOS/OS semaphore is written, but we all know we can't trust BIOS * writers. * * Unconditionally switch the ports back to xHCI after a system resume. * It should not matter whether the EHCI or xHCI controller is * resumed first. It's enough to do the switchover in xHCI because * USB core won't notice anything as the hub driver doesn't start * running again until after all the devices (including both EHCI and * xHCI host controllers) have been resumed. */ if (pdev->vendor == PCI_VENDOR_ID_INTEL) usb_enable_intel_xhci_ports(pdev); if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) xhci_ssic_port_unused_quirk(hcd, false); if (xhci->quirks & XHCI_PME_STUCK_QUIRK) xhci_pme_quirk(hcd); retval = xhci_resume(xhci, msg); return retval; } static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_port *port; struct usb_device *udev; unsigned int slot_id; u32 portsc; int i; /* * Systems with XHCI_RESET_TO_DEFAULT quirk have boot firmware that * cause significant boot delay if usb ports are in suspended U3 state * during boot. Some USB devices survive in U3 state over S4 hibernate * * Disable ports that are in U3 if remote wake is not enabled for either * host controller or connected device */ if (!(xhci->quirks & XHCI_RESET_TO_DEFAULT)) return 0; for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) { port = &xhci->hw_ports[i]; portsc = readl(port->addr); if ((portsc & PORT_PLS_MASK) != XDEV_U3) continue; slot_id = xhci_find_slot_id_by_port(port->rhub->hcd, xhci, port->hcd_portnum + 1); if (!slot_id || !xhci->devs[slot_id]) { xhci_err(xhci, "No dev for slot_id %d for port %d-%d in U3\n", slot_id, port->rhub->hcd->self.busnum, port->hcd_portnum + 1); continue; } udev = xhci->devs[slot_id]->udev; /* if wakeup is enabled then don't disable the port */ if (udev->do_remote_wakeup && do_wakeup) continue; xhci_dbg(xhci, "port %d-%d in U3 without wakeup, disable it\n", port->rhub->hcd->self.busnum, port->hcd_portnum + 1); portsc = xhci_port_state_to_neutral(portsc); writel(portsc | PORT_PE, port->addr); } return 0; } static void xhci_pci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); xhci_shutdown(hcd); xhci_cleanup_msix(xhci); /* Yet another workaround for spurious wakeups at shutdown with HSW */ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) pci_set_power_state(pdev, PCI_D3hot); } /*-------------------------------------------------------------------------*/ static const struct xhci_driver_data reneses_data = { .quirks = XHCI_RENESAS_FW_QUIRK, .firmware = "renesas_usb_fw.mem", }; /* PCI driver selection metadata; PCI hotplugging uses this */ static const struct pci_device_id pci_ids[] = { { PCI_DEVICE(0x1912, 0x0014), .driver_data = (unsigned long)&reneses_data, }, { PCI_DEVICE(0x1912, 0x0015), .driver_data = (unsigned long)&reneses_data, }, /* handle any USB 3.0 xHCI controller */ { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), }, { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE(pci, pci_ids); /* * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't * load firmware, so don't encumber the xhci-pci driver with it. */ #if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS) MODULE_FIRMWARE("renesas_usb_fw.mem"); #endif /* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver xhci_pci_driver = { .name = hcd_name, .id_table = pci_ids, .probe = xhci_pci_probe, .remove = xhci_pci_remove, /* suspend and resume implemented later */ .shutdown = usb_hcd_pci_shutdown, .driver = { .pm = pm_ptr(&usb_hcd_pci_pm_ops), }, }; static int __init xhci_pci_init(void) { xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides); xhci_pci_hc_driver.pci_suspend = pm_ptr(xhci_pci_suspend); xhci_pci_hc_driver.pci_resume = pm_ptr(xhci_pci_resume); xhci_pci_hc_driver.pci_poweroff_late = pm_ptr(xhci_pci_poweroff_late); xhci_pci_hc_driver.shutdown = pm_ptr(xhci_pci_shutdown); xhci_pci_hc_driver.stop = xhci_pci_stop; return pci_register_driver(&xhci_pci_driver); } module_init(xhci_pci_init); static void __exit xhci_pci_exit(void) { pci_unregister_driver(&xhci_pci_driver); } module_exit(xhci_pci_exit); MODULE_DESCRIPTION("xHCI PCI Host Controller Driver"); MODULE_LICENSE("GPL");