diff options
Diffstat (limited to 'drivers/thermal/sun8i_thermal.c')
| -rw-r--r-- | drivers/thermal/sun8i_thermal.c | 139 |
1 files changed, 116 insertions, 23 deletions
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c index 6a8e386dbc8dc..3203d8bd13a8f 100644 --- a/drivers/thermal/sun8i_thermal.c +++ b/drivers/thermal/sun8i_thermal.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/nvmem-consumer.h> #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/reset.h> @@ -50,7 +51,8 @@ #define SUN8I_THS_CTRL2_T_ACQ1(x) ((GENMASK(15, 0) & (x)) << 16) #define SUN8I_THS_DATA_IRQ_STS(x) BIT(x + 8) -#define SUN50I_THS_CTRL0_T_ACQ(x) ((GENMASK(15, 0) & (x)) << 16) +#define SUN50I_THS_CTRL0_T_ACQ(x) (GENMASK(15, 0) & ((x) - 1)) +#define SUN50I_THS_CTRL0_T_SAMPLE_PER(x) ((GENMASK(15, 0) & ((x) - 1)) << 16) #define SUN50I_THS_FILTER_EN BIT(2) #define SUN50I_THS_FILTER_TYPE(x) (GENMASK(1, 0) & (x)) #define SUN50I_H6_THS_PC_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12) @@ -65,6 +67,7 @@ struct tsensor { struct ths_thermal_chip { bool has_mod_clk; bool has_bus_clk_reset; + bool needs_sram; int sensor_num; int offset; int scale; @@ -82,12 +85,16 @@ struct ths_device { const struct ths_thermal_chip *chip; struct device *dev; struct regmap *regmap; + struct regmap_field *sram_regmap_field; struct reset_control *reset; struct clk *bus_clk; struct clk *mod_clk; struct tsensor sensor[MAX_SENSOR_NUM]; }; +/* The H616 needs to have a bit 16 in the SRAM control register cleared. */ +static const struct reg_field sun8i_ths_sram_reg_field = REG_FIELD(0x0, 16, 16); + /* Temp Unit: millidegree Celsius */ static int sun8i_ths_calc_temp(struct ths_device *tmdev, int id, int reg) @@ -188,6 +195,9 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data) int i; for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) { + /* We allow some zones to not register. */ + if (IS_ERR(tmdev->sensor[i].tzd)) + continue; thermal_zone_device_update(tmdev->sensor[i].tzd, THERMAL_EVENT_UNSPECIFIED); } @@ -221,16 +231,21 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev, struct device *dev = tmdev->dev; int i, ft_temp; - if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) + if (!caldata[0]) return -EINVAL; /* * efuse layout: * - * 0 11 16 32 - * +-------+-------+-------+ - * |temp| |sensor0|sensor1| - * +-------+-------+-------+ + * 0 11 16 27 32 43 48 57 + * +----------+-----------+-----------+-----------+ + * | temp | |sensor0| |sensor1| |sensor2| | + * +----------+-----------+-----------+-----------+ + * ^ ^ ^ + * | | | + * | | sensor3[11:8] + * | sensor3[7:4] + * sensor3[3:0] * * The calibration data on the H6 is the ambient temperature and * sensor values that are filled during the factory test stage. @@ -243,9 +258,16 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev, ft_temp = (caldata[0] & FT_TEMP_MASK) * 100; for (i = 0; i < tmdev->chip->sensor_num; i++) { - int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK; - int cdata, offset; - int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg); + int sensor_reg, sensor_temp, cdata, offset; + + if (i == 3) + sensor_reg = (caldata[1] >> 12) + | ((caldata[2] >> 12) << 4) + | ((caldata[3] >> 12) << 8); + else + sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK; + + sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg); /* * Calibration data is CALIBRATE_DEFAULT - (calculated @@ -324,6 +346,34 @@ static void sun8i_ths_reset_control_assert(void *data) reset_control_assert(data); } +static struct regmap *sun8i_ths_get_sram_regmap(struct device_node *node) +{ + struct device_node *sram_node; + struct platform_device *sram_pdev; + struct regmap *regmap = NULL; + + sram_node = of_parse_phandle(node, "allwinner,sram", 0); + if (!sram_node) + return ERR_PTR(-ENODEV); + + sram_pdev = of_find_device_by_node(sram_node); + if (!sram_pdev) { + /* platform device might not be probed yet */ + regmap = ERR_PTR(-EPROBE_DEFER); + goto out_put_node; + } + + /* If no regmap is found then the other device driver is at fault */ + regmap = dev_get_regmap(&sram_pdev->dev, NULL); + if (!regmap) + regmap = ERR_PTR(-EINVAL); + + platform_device_put(sram_pdev); +out_put_node: + of_node_put(sram_node); + return regmap; +} + static int sun8i_ths_resource_init(struct ths_device *tmdev) { struct device *dev = tmdev->dev; @@ -368,6 +418,19 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev) if (ret) return ret; + if (tmdev->chip->needs_sram) { + struct regmap *regmap; + + regmap = sun8i_ths_get_sram_regmap(dev->of_node); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + tmdev->sram_regmap_field = devm_regmap_field_alloc(dev, + regmap, + sun8i_ths_sram_reg_field); + if (IS_ERR(tmdev->sram_regmap_field)) + return PTR_ERR(tmdev->sram_regmap_field); + } + ret = sun8i_ths_calibrate(tmdev); if (ret) return ret; @@ -410,25 +473,31 @@ static int sun8i_h3_thermal_init(struct ths_device *tmdev) return 0; } -/* - * Without this undocumented value, the returned temperatures would - * be higher than real ones by about 20C. - */ -#define SUN50I_H6_CTRL0_UNK 0x0000002f - static int sun50i_h6_thermal_init(struct ths_device *tmdev) { int val; + /* The H616 needs to have a bit in the SRAM control register cleared. */ + if (tmdev->sram_regmap_field) + regmap_field_write(tmdev->sram_regmap_field, 0); + /* - * T_acq = 20us - * clkin = 24MHz - * - * x = T_acq * clkin - 1 - * = 479 + * The manual recommends an overall sample frequency of 50 KHz (20us, + * 480 cycles at 24 MHz), which provides plenty of time for both the + * acquisition time (>24 cycles) and the actual conversion time + * (>14 cycles). + * The lower half of the CTRL register holds the "acquire time", in + * clock cycles, which the manual recommends to be 2us: + * 24MHz * 2us = 48 cycles. + * The high half of THS_CTRL encodes the sample frequency, in clock + * cycles: 24MHz * 20us = 480 cycles. + * This is explained in the H616 manual, but apparently wrongly + * described in the H6 manual, although the BSP code does the same + * for both SoCs. */ regmap_write(tmdev->regmap, SUN50I_THS_CTRL0, - SUN50I_H6_CTRL0_UNK | SUN50I_THS_CTRL0_T_ACQ(479)); + SUN50I_THS_CTRL0_T_ACQ(48) | + SUN50I_THS_CTRL0_T_SAMPLE_PER(480)); /* average over 4 samples */ regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC, SUN50I_THS_FILTER_EN | @@ -465,8 +534,17 @@ static int sun8i_ths_register(struct ths_device *tmdev) i, &tmdev->sensor[i], &ths_ops); - if (IS_ERR(tmdev->sensor[i].tzd)) - return PTR_ERR(tmdev->sensor[i].tzd); + + /* + * If an individual zone fails to register for reasons + * other than probe deferral (eg, a bad DT) then carry + * on, other zones might register successfully. + */ + if (IS_ERR(tmdev->sensor[i].tzd)) { + if (PTR_ERR(tmdev->sensor[i].tzd) == -EPROBE_DEFER) + return PTR_ERR(tmdev->sensor[i].tzd); + continue; + } devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd); } @@ -618,6 +696,20 @@ static const struct ths_thermal_chip sun20i_d1_ths = { .calc_temp = sun8i_ths_calc_temp, }; +static const struct ths_thermal_chip sun50i_h616_ths = { + .sensor_num = 4, + .has_bus_clk_reset = true, + .needs_sram = true, + .ft_deviation = 8000, + .offset = 263655, + .scale = 810, + .temp_data_base = SUN50I_H6_THS_TEMP_DATA, + .calibrate = sun50i_h6_ths_calibrate, + .init = sun50i_h6_thermal_init, + .irq_ack = sun50i_h6_irq_ack, + .calc_temp = sun8i_ths_calc_temp, +}; + static const struct of_device_id of_ths_match[] = { { .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths }, { .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths }, @@ -627,6 +719,7 @@ static const struct of_device_id of_ths_match[] = { { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths }, { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths }, { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths }, + { .compatible = "allwinner,sun50i-h616-ths", .data = &sun50i_h616_ths }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, of_ths_match); |