Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git

33 files changed, 794 insertions, 558 deletions

diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
deleted file mode 100644
index 8b2b0460259a76..00000000000000
--- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* BCM63xx UART
-
-Required properties:
-
-- compatible: "brcm,bcm6345-uart"
-
-- reg: The base address of the UART register bank.
-
-- interrupts: A single interrupt specifier.
-
-- clocks: Clock driving the hardware; used to figure out the baud rate
-  divisor.
-
-
-Optional properties:
-
-- clock-names: Should be "refclk".
-
-Example:
-
-	uart0: serial@14e00520 {
-		compatible = "brcm,bcm6345-uart";
-		reg = <0x14e00520 0x18>;
-		interrupt-parent = <&periph_intc>;
-		interrupts = <2>;
-		clocks = <&periph_clk>;
-		clock-names = "refclk";
-	};
-
-	clocks {
-		periph_clk: periph_clk@0 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <54000000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
new file mode 100644
index 00000000000000..a22285c43f809a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/brcm,bcm6345-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx UART
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm6345-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    serial@14e00520 {
+        compatible = "brcm,bcm6345-uart";
+        reg = <0x14e00520 0x18>;
+        interrupt-parent = <&periph_intc>;
+        interrupts = <2>;
+        clocks = <&periph_clk>;
+        clock-names = "refclk";
+    };
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index f064e5b76cf1cf..2940afb874b342 100644
--- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -26,6 +26,7 @@ properties:
           - samsung,s3c6400-uart
           - samsung,s5pv210-uart
           - samsung,exynos4210-uart
+          - samsung,exynos850-uart
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt
deleted file mode 100644
index c37deb44deadab..00000000000000
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Xilinx Axi Uartlite controller Device Tree Bindings
----------------------------------------------------------
-
-Required properties:
-- compatible		: Can be either of
-				"xlnx,xps-uartlite-1.00.a"
-				"xlnx,opb-uartlite-1.00.b"
-- reg			: Physical base address and size of the Axi Uartlite
-			  registers map.
-- interrupts		: Should contain the UART controller interrupt.
-
-Optional properties:
-- port-number		: Set Uart port number
-- clock-names		: Should be "s_axi_aclk"
-- clocks		: Input clock specifier. Refer to common clock bindings.
-
-Example:
-serial@800c0000 {
-	compatible = "xlnx,xps-uartlite-1.00.a";
-	reg = <0x0 0x800c0000 0x10000>;
-	interrupts = <0x0 0x6e 0x1>;
-	port-number = <0>;
-};
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
new file mode 100644
index 00000000000000..b8a2bfe14bed2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/xlnx,opb-uartlite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Axi Uartlite
+
+maintainers:
+  - Peter Korsgaard <jacmet@sunsite.dk>
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - xlnx,xps-uartlite-1.00.a
+        - xlnx,opb-uartlite-1.00.b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  port-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Set Uart port number
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: s_axi_aclk
+
+  current-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The fixed baud rate that the device was configured for.
+
+  xlnx,data-bits:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [5, 6, 7, 8]
+    description:
+      The fixed number of data bits that the device was configured for.
+
+  xlnx,use-parity:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      Whether parity checking was enabled when the device was configured.
+
+  xlnx,odd-parity:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      Whether odd parity was configured.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - current-speed
+  - xlnx,data-bits
+  - xlnx,use-parity
+
+allOf:
+  - $ref: /schemas/serial.yaml#
+  - if:
+      properties:
+        xlnx,use-parity:
+          contains:
+            const: 1
+    then:
+      required:
+        - xlnx,odd-parity
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      serial@800c0000 {
+        compatible = "xlnx,xps-uartlite-1.00.a";
+        reg = <0x800c0000 0x10000>;
+        interrupts = <0x0 0x6e 0x1>;
+        port-number = <0>;
+        current-speed = <115200>;
+        xlnx,data-bits = <8>;
+        xlnx,use-parity = <0>;
+      };
+...
diff --git a/Documentation/driver-api/serial/n_gsm.rst b/Documentation/driver-api/serial/n_gsm.rst
index 87dfcd54a96b14..8fe723ab9c67af 100644
--- a/Documentation/driver-api/serial/n_gsm.rst
+++ b/Documentation/driver-api/serial/n_gsm.rst
@@ -12,13 +12,16 @@ modems connected to a physical serial port.
 
 How to use it
 -------------
-1. initialize the modem in 0710 mux mode (usually AT+CMUX= command) through
-   its serial port. Depending on the modem used, you can pass more or less
-   parameters to this command,
-2. switch the serial line to using the n_gsm line discipline by using
-   TIOCSETD ioctl,
-3. configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl,
-4. obtain base gsmtty number for the used serial port,
+1. config initiator
+^^^^^^^^^^^^^^^^^^^^^
+
+1.1 initialize the modem in 0710 mux mode (usually AT+CMUX= command) through
+    its serial port. Depending on the modem used, you can pass more or less
+    parameters to this command.
+1.2 switch the serial line to using the n_gsm line discipline by using
+    TIOCSETD ioctl.
+1.3 configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl.
+1.4 obtain base gsmtty number for the used serial port.
 
 Major parts of the initialization program :
 (a good starting point is util-linux-ng/sys-utils/ldattach.c)::
@@ -70,14 +73,14 @@ Major parts of the initialization program :
 	daemon(0,0);
 	pause();
 
-5. use these devices as plain serial ports.
+1.5 use these devices as plain serial ports.
 
    for example, it's possible:
 
    - and to use gnokii to send / receive SMS on ttygsm1
    - to use ppp to establish a datalink on ttygsm2
 
-6. first close all virtual ports before closing the physical port.
+1.6 first close all virtual ports before closing the physical port.
 
    Note that after closing the physical port the modem is still in multiplexing
    mode. This may prevent a successful re-opening of the port later. To avoid
@@ -87,6 +90,56 @@ Major parts of the initialization program :
 
       0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9.
 
+2. config requester
+^^^^^^^^^^^^^^^^^^^^^
+
+2.1 receive string "AT+CMUX= command" through its serial port,initialize
+    mux mode config
+2.2 switch the serial line to using the n_gsm line discipline by using
+    TIOCSETD ioctl.
+2.3 configure the mux using GSMIOC_GETCONF / GSMIOC_SETCONF ioctl.
+2.4 obtain base gsmtty number for the used serial port,
+
+  #include <stdio.h>
+  #include <stdint.h>
+  #include <linux/gsmmux.h>
+  #include <linux/tty.h>
+  #define DEFAULT_SPEED	B115200
+  #define SERIAL_PORT	/dev/ttyS0
+
+	int ldisc = N_GSM0710;
+	struct gsm_config c;
+	struct termios configuration;
+	uint32_t first;
+
+	/* open the serial port */
+	fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
+
+	/* configure the serial port : speed, flow control ... */
+
+	/* get serial data and check "AT+CMUX=command" parameter ... */
+
+	/* use n_gsm line discipline */
+	ioctl(fd, TIOCSETD, &ldisc);
+
+	/* get n_gsm configuration */
+	ioctl(fd, GSMIOC_GETCONF, &c);
+	/* we are requester and need encoding 0 (basic) */
+	c.initiator = 0;
+	c.encapsulation = 0;
+	/* our modem defaults to a maximum size of 127 bytes */
+	c.mru = 127;
+	c.mtu = 127;
+	/* set the new configuration */
+	ioctl(fd, GSMIOC_SETCONF, &c);
+	/* get first gsmtty device node */
+	ioctl(fd, GSMIOC_GETFIRST, &first);
+	printf("first muxed line: /dev/gsmtty%i\n", first);
+
+	/* and wait for ever to keep the line discipline enabled */
+	daemon(0,0);
+	pause();
+
 Additional Documentation
 ------------------------
 More practical details on the protocol and how it's supported by industrial
diff --git a/Documentation/driver-api/serial/tty.rst b/Documentation/driver-api/serial/tty.rst
index dd972caacf3ee6..4b709f392713d4 100644
--- a/Documentation/driver-api/serial/tty.rst
+++ b/Documentation/driver-api/serial/tty.rst
@@ -58,7 +58,7 @@ close()			This is called on a terminal when the line
 hangup()		Called when the tty line is hung up.
 			The line discipline should cease I/O to the tty.
 			No further calls into the ldisc code will occur.
-			The return value is ignored. Can sleep.
+			Can sleep.
 
 read()			(optional) A process requests reading data from
 			the line. Multiple read calls may occur in parallel
diff --git a/arch/sh/boot/dts/j2_mimas_v2.dts b/arch/sh/boot/dts/j2_mimas_v2.dts
index 9f4742fab329d3..fa9562f78d532c 100644
--- a/arch/sh/boot/dts/j2_mimas_v2.dts
+++ b/arch/sh/boot/dts/j2_mimas_v2.dts
@@ -88,6 +88,8 @@
 			clock-frequency = <125000000>;
 			compatible = "xlnx,xps-uartlite-1.00.a";
 			current-speed = <19200>;
+			xlnx,use-parity = <0>;
+			xlnx,data-bits = <8>;
 			device_type = "serial";
 			interrupts = <0x12>;
 			port-number = <0>;
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 5e32e4d5367af5..ecdf8e034351d6 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -793,7 +793,7 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
 		break;
 
 	default:
-		err = n_tty_ioctl_helper(tty, file, cmd, arg);
+		err = n_tty_ioctl_helper(tty, cmd, arg);
 		break;
 	}
 
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 7fbbe00e3553c9..17eb8f2aa48dd3 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -244,7 +244,7 @@ static int serport_ldisc_compat_ioctl(struct tty_struct *tty,
 }
 #endif
 
-static int serport_ldisc_hangup(struct tty_struct *tty)
+static void serport_ldisc_hangup(struct tty_struct *tty)
 {
 	struct serport *serport = (struct serport *) tty->disc_data;
 	unsigned long flags;
@@ -254,7 +254,6 @@ static int serport_ldisc_hangup(struct tty_struct *tty)
 	spin_unlock_irqrestore(&serport->lock, flags);
 
 	wake_up_interruptible(&serport->wait);
-	return 0;
 }
 
 static void serport_ldisc_write_wakeup(struct tty_struct * tty)
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index d42ec7d1bc1466..9a4ebda30510ef 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -664,10 +664,9 @@ static void slcan_close(struct tty_struct *tty)
 	/* This will complete via sl_free_netdev */
 }
 
-static int slcan_hangup(struct tty_struct *tty)
+static void slcan_hangup(struct tty_struct *tty)
 {
 	slcan_close(tty);
-	return 0;
 }
 
 /* Perform I/O control on an active SLCAN channel. */
@@ -692,7 +691,7 @@ static int slcan_ioctl(struct tty_struct *tty, struct file *file,
 		return -EINVAL;
 
 	default:
-		return tty_mode_ioctl(tty, file, cmd, arg);
+		return tty_mode_ioctl(tty, cmd, arg);
 	}
 }
 
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 6192244b304ab9..92d4e020456dfd 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -732,7 +732,7 @@ static int sixpack_ioctl(struct tty_struct *tty, struct file *file,
 			break;
 		}
 	default:
-		err = tty_mode_ioctl(tty, file, cmd, arg);
+		err = tty_mode_ioctl(tty, cmd, arg);
 	}
 
 	sp_put(sp);
diff --git a/drivers/net/ppp/ppp_async.c b/drivers/net/ppp/ppp_async.c
index 29a93d6bfe37f8..f4429b93a9c84c 100644
--- a/drivers/net/ppp/ppp_async.c
+++ b/drivers/net/ppp/ppp_async.c
@@ -247,10 +247,9 @@ ppp_asynctty_close(struct tty_struct *tty)
  * Wait for I/O to driver to complete and unregister PPP channel.
  * This is already done by the close routine, so just call that.
  */
-static int ppp_asynctty_hangup(struct tty_struct *tty)
+static void ppp_asynctty_hangup(struct tty_struct *tty)
 {
 	ppp_asynctty_close(tty);
-	return 0;
 }
 
 /*
@@ -311,7 +310,7 @@ ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file,
 		/* flush our buffers and the serial port's buffer */
 		if (arg == TCIOFLUSH || arg == TCOFLUSH)
 			ppp_async_flush_output(ap);
-		err = n_tty_ioctl_helper(tty, file, cmd, arg);
+		err = n_tty_ioctl_helper(tty, cmd, arg);
 		break;
 
 	case FIONREAD:
@@ -323,7 +322,7 @@ ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file,
 
 	default:
 		/* Try the various mode ioctls */
-		err = tty_mode_ioctl(tty, file, cmd, arg);
+		err = tty_mode_ioctl(tty, cmd, arg);
 	}
 
 	ap_put(ap);
diff --git a/drivers/net/ppp/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c
index af3e048695b662..b3a71b409a800f 100644
--- a/drivers/net/ppp/ppp_synctty.c
+++ b/drivers/net/ppp/ppp_synctty.c
@@ -245,10 +245,9 @@ ppp_sync_close(struct tty_struct *tty)
  * Wait for I/O to driver to complete and unregister PPP channel.
  * This is already done by the close routine, so just call that.
  */
-static int ppp_sync_hangup(struct tty_struct *tty)
+static void ppp_sync_hangup(struct tty_struct *tty)
 {
 	ppp_sync_close(tty);
-	return 0;
 }
 
 /*
@@ -304,7 +303,7 @@ ppp_synctty_ioctl(struct tty_struct *tty, struct file *file,
 		/* flush our buffers and the serial port's buffer */
 		if (arg == TCIOFLUSH || arg == TCOFLUSH)
 			ppp_sync_flush_output(ap);
-		err = n_tty_ioctl_helper(tty, file, cmd, arg);
+		err = n_tty_ioctl_helper(tty, cmd, arg);
 		break;
 
 	case FIONREAD:
@@ -315,7 +314,7 @@ ppp_synctty_ioctl(struct tty_struct *tty, struct file *file,
 		break;
 
 	default:
-		err = tty_mode_ioctl(tty, file, cmd, arg);
+		err = tty_mode_ioctl(tty, cmd, arg);
 		break;
 	}
 
diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c
index 5435b5689ce6b7..9f3b4c1aa5ce88 100644
--- a/drivers/net/slip/slip.c
+++ b/drivers/net/slip/slip.c
@@ -907,10 +907,9 @@ static void slip_close(struct tty_struct *tty)
 	/* This will complete via sl_free_netdev */
 }
 
-static int slip_hangup(struct tty_struct *tty)
+static void slip_hangup(struct tty_struct *tty)
 {
 	slip_close(tty);
-	return 0;
 }
  /************************************************************************
   *			STANDARD SLIP ENCAPSULATION		  	 *
@@ -1174,7 +1173,7 @@ static int slip_ioctl(struct tty_struct *tty, struct file *file,
 	/* VSV changes end */
 #endif
 	default:
-		return tty_mode_ioctl(tty, file, cmd, arg);
+		return tty_mode_ioctl(tty, cmd, arg);
 	}
 }
 
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index bf17e90858b8cd..e37683e250555e 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -45,7 +45,307 @@
 #include <asm/io.h>
 #include <linux/uaccess.h>
 
-#include "moxa.h"
+#define	MOXA			0x400
+#define MOXA_GET_IQUEUE		(MOXA + 1)	/* get input buffered count */
+#define MOXA_GET_OQUEUE		(MOXA + 2)	/* get output buffered count */
+#define MOXA_GETDATACOUNT       (MOXA + 23)
+#define MOXA_GET_IOQUEUE	(MOXA + 27)
+#define MOXA_FLUSH_QUEUE	(MOXA + 28)
+#define MOXA_GETMSTATUS         (MOXA + 65)
+
+/*
+ *    System Configuration
+ */
+
+#define Magic_code	0x404
+
+/*
+ *    for C218 BIOS initialization
+ */
+#define C218_ConfBase	0x800
+#define C218_status	(C218_ConfBase + 0)	/* BIOS running status    */
+#define C218_diag	(C218_ConfBase + 2)	/* diagnostic status      */
+#define C218_key	(C218_ConfBase + 4)	/* WORD (0x218 for C218) */
+#define C218DLoad_len	(C218_ConfBase + 6)	/* WORD           */
+#define C218check_sum	(C218_ConfBase + 8)	/* BYTE           */
+#define C218chksum_ok	(C218_ConfBase + 0x0a)	/* BYTE (1:ok)            */
+#define C218_TestRx	(C218_ConfBase + 0x10)	/* 8 bytes for 8 ports    */
+#define C218_TestTx	(C218_ConfBase + 0x18)	/* 8 bytes for 8 ports    */
+#define C218_RXerr	(C218_ConfBase + 0x20)	/* 8 bytes for 8 ports    */
+#define C218_ErrFlag	(C218_ConfBase + 0x28)	/* 8 bytes for 8 ports    */
+
+#define C218_LoadBuf	0x0F00
+#define C218_KeyCode	0x218
+#define CP204J_KeyCode	0x204
+
+/*
+ *    for C320 BIOS initialization
+ */
+#define C320_ConfBase	0x800
+#define C320_LoadBuf	0x0f00
+#define STS_init	0x05	/* for C320_status        */
+
+#define C320_status	C320_ConfBase + 0	/* BIOS running status    */
+#define C320_diag	C320_ConfBase + 2	/* diagnostic status      */
+#define C320_key	C320_ConfBase + 4	/* WORD (0320H for C320) */
+#define C320DLoad_len	C320_ConfBase + 6	/* WORD           */
+#define C320check_sum	C320_ConfBase + 8	/* WORD           */
+#define C320chksum_ok	C320_ConfBase + 0x0a	/* WORD (1:ok)            */
+#define C320bapi_len	C320_ConfBase + 0x0c	/* WORD           */
+#define C320UART_no	C320_ConfBase + 0x0e	/* WORD           */
+
+#define C320_KeyCode	0x320
+
+#define FixPage_addr	0x0000	/* starting addr of static page  */
+#define DynPage_addr	0x2000	/* starting addr of dynamic page */
+#define C218_start	0x3000	/* starting addr of C218 BIOS prg */
+#define Control_reg	0x1ff0	/* select page and reset control */
+#define HW_reset	0x80
+
+/*
+ *    Function Codes
+ */
+#define FC_CardReset	0x80
+#define FC_ChannelReset 1	/* C320 firmware not supported */
+#define FC_EnableCH	2
+#define FC_DisableCH	3
+#define FC_SetParam	4
+#define FC_SetMode	5
+#define FC_SetRate	6
+#define FC_LineControl	7
+#define FC_LineStatus	8
+#define FC_XmitControl	9
+#define FC_FlushQueue	10
+#define FC_SendBreak	11
+#define FC_StopBreak	12
+#define FC_LoopbackON	13
+#define FC_LoopbackOFF	14
+#define FC_ClrIrqTable	15
+#define FC_SendXon	16
+#define FC_SetTermIrq	17	/* C320 firmware not supported */
+#define FC_SetCntIrq	18	/* C320 firmware not supported */
+#define FC_SetBreakIrq	19
+#define FC_SetLineIrq	20
+#define FC_SetFlowCtl	21
+#define FC_GenIrq	22
+#define FC_InCD180	23
+#define FC_OutCD180	24
+#define FC_InUARTreg	23
+#define FC_OutUARTreg	24
+#define FC_SetXonXoff	25
+#define FC_OutCD180CCR	26
+#define FC_ExtIQueue	27
+#define FC_ExtOQueue	28
+#define FC_ClrLineIrq	29
+#define FC_HWFlowCtl	30
+#define FC_GetClockRate 35
+#define FC_SetBaud	36
+#define FC_SetDataMode  41
+#define FC_GetCCSR      43
+#define FC_GetDataError 45
+#define FC_RxControl	50
+#define FC_ImmSend	51
+#define FC_SetXonState	52
+#define FC_SetXoffState	53
+#define FC_SetRxFIFOTrig 54
+#define FC_SetTxFIFOCnt 55
+#define FC_UnixRate	56
+#define FC_UnixResetTimer 57
+
+#define	RxFIFOTrig1	0
+#define	RxFIFOTrig4	1
+#define	RxFIFOTrig8	2
+#define	RxFIFOTrig14	3
+
+/*
+ *    Dual-Ported RAM
+ */
+#define DRAM_global	0
+#define INT_data	(DRAM_global + 0)
+#define Config_base	(DRAM_global + 0x108)
+
+#define IRQindex	(INT_data + 0)
+#define IRQpending	(INT_data + 4)
+#define IRQtable	(INT_data + 8)
+
+/*
+ *    Interrupt Status
+ */
+#define IntrRx		0x01	/* receiver data O.K.             */
+#define IntrTx		0x02	/* transmit buffer empty  */
+#define IntrFunc	0x04	/* function complete              */
+#define IntrBreak	0x08	/* received break         */
+#define IntrLine	0x10	/* line status change
+				   for transmitter                */
+#define IntrIntr	0x20	/* received INTR code             */
+#define IntrQuit	0x40	/* received QUIT code             */
+#define IntrEOF		0x80	/* received EOF code              */
+
+#define IntrRxTrigger	0x100	/* rx data count reach trigger value */
+#define IntrTxTrigger	0x200	/* tx data count below trigger value */
+
+#define Magic_no	(Config_base + 0)
+#define Card_model_no	(Config_base + 2)
+#define Total_ports	(Config_base + 4)
+#define Module_cnt	(Config_base + 8)
+#define Module_no	(Config_base + 10)
+#define Timer_10ms	(Config_base + 14)
+#define Disable_IRQ	(Config_base + 20)
+#define TMS320_PORT1	(Config_base + 22)
+#define TMS320_PORT2	(Config_base + 24)
+#define TMS320_CLOCK	(Config_base + 26)
+
+/*
+ *    DATA BUFFER in DRAM
+ */
+#define Extern_table	0x400	/* Base address of the external table
+				   (24 words *    64) total 3K bytes
+				   (24 words * 128) total 6K bytes */
+#define Extern_size	0x60	/* 96 bytes                       */
+#define RXrptr		0x00	/* read pointer for RX buffer     */
+#define RXwptr		0x02	/* write pointer for RX buffer    */
+#define TXrptr		0x04	/* read pointer for TX buffer     */
+#define TXwptr		0x06	/* write pointer for TX buffer    */
+#define HostStat	0x08	/* IRQ flag and general flag      */
+#define FlagStat	0x0A
+#define FlowControl	0x0C	/* B7 B6 B5 B4 B3 B2 B1 B0              */
+				/*  x  x  x  x  |  |  |  |            */
+				/*              |  |  |  + CTS flow   */
+				/*              |  |  +--- RTS flow   */
+				/*              |  +------ TX Xon/Xoff */
+				/*              +--------- RX Xon/Xoff */
+#define Break_cnt	0x0E	/* received break count   */
+#define CD180TXirq	0x10	/* if non-0: enable TX irq        */
+#define RX_mask		0x12
+#define TX_mask		0x14
+#define Ofs_rxb		0x16
+#define Ofs_txb		0x18
+#define Page_rxb	0x1A
+#define Page_txb	0x1C
+#define EndPage_rxb	0x1E
+#define EndPage_txb	0x20
+#define Data_error	0x22
+#define RxTrigger	0x28
+#define TxTrigger	0x2a
+
+#define rRXwptr		0x34
+#define Low_water	0x36
+
+#define FuncCode	0x40
+#define FuncArg		0x42
+#define FuncArg1	0x44
+
+#define C218rx_size	0x2000	/* 8K bytes */
+#define C218tx_size	0x8000	/* 32K bytes */
+
+#define C218rx_mask	(C218rx_size - 1)
+#define C218tx_mask	(C218tx_size - 1)
+
+#define C320p8rx_size	0x2000
+#define C320p8tx_size	0x8000
+#define C320p8rx_mask	(C320p8rx_size - 1)
+#define C320p8tx_mask	(C320p8tx_size - 1)
+
+#define C320p16rx_size	0x2000
+#define C320p16tx_size	0x4000
+#define C320p16rx_mask	(C320p16rx_size - 1)
+#define C320p16tx_mask	(C320p16tx_size - 1)
+
+#define C320p24rx_size	0x2000
+#define C320p24tx_size	0x2000
+#define C320p24rx_mask	(C320p24rx_size - 1)
+#define C320p24tx_mask	(C320p24tx_size - 1)
+
+#define C320p32rx_size	0x1000
+#define C320p32tx_size	0x1000
+#define C320p32rx_mask	(C320p32rx_size - 1)
+#define C320p32tx_mask	(C320p32tx_size - 1)
+
+#define Page_size	0x2000U
+#define Page_mask	(Page_size - 1)
+#define C218rx_spage	3
+#define C218tx_spage	4
+#define C218rx_pageno	1
+#define C218tx_pageno	4
+#define C218buf_pageno	5
+
+#define C320p8rx_spage	3
+#define C320p8tx_spage	4
+#define C320p8rx_pgno	1
+#define C320p8tx_pgno	4
+#define C320p8buf_pgno	5
+
+#define C320p16rx_spage 3
+#define C320p16tx_spage 4
+#define C320p16rx_pgno	1
+#define C320p16tx_pgno	2
+#define C320p16buf_pgno 3
+
+#define C320p24rx_spage 3
+#define C320p24tx_spage 4
+#define C320p24rx_pgno	1
+#define C320p24tx_pgno	1
+#define C320p24buf_pgno 2
+
+#define C320p32rx_spage 3
+#define C320p32tx_ofs	C320p32rx_size
+#define C320p32tx_spage 3
+#define C320p32buf_pgno 1
+
+/*
+ *    Host Status
+ */
+#define WakeupRx	0x01
+#define WakeupTx	0x02
+#define WakeupBreak	0x08
+#define WakeupLine	0x10
+#define WakeupIntr	0x20
+#define WakeupQuit	0x40
+#define WakeupEOF	0x80	/* used in VTIME control */
+#define WakeupRxTrigger	0x100
+#define WakeupTxTrigger	0x200
+/*
+ *    Flag status
+ */
+#define Rx_over		0x01
+#define Xoff_state	0x02
+#define Tx_flowOff	0x04
+#define Tx_enable	0x08
+#define CTS_state	0x10
+#define DSR_state	0x20
+#define DCD_state	0x80
+/*
+ *    FlowControl
+ */
+#define CTS_FlowCtl	1
+#define RTS_FlowCtl	2
+#define Tx_FlowCtl	4
+#define Rx_FlowCtl	8
+#define IXM_IXANY	0x10
+
+#define LowWater	128
+
+#define DTR_ON		1
+#define RTS_ON		2
+#define CTS_ON		1
+#define DSR_ON		2
+#define DCD_ON		8
+
+/* mode definition */
+#define	MX_CS8		0x03
+#define	MX_CS7		0x02
+#define	MX_CS6		0x01
+#define	MX_CS5		0x00
+
+#define	MX_STOP1	0x00
+#define	MX_STOP15	0x04
+#define	MX_STOP2	0x08
+
+#define	MX_PARNONE	0x00
+#define	MX_PAREVEN	0x40
+#define	MX_PARODD	0xC0
+#define	MX_PARMARK	0xA0
+#define	MX_PARSPACE	0x20
 
 #define MOXA_VERSION		"6.0k"
 
diff --git a/drivers/tty/moxa.h b/drivers/tty/moxa.h
deleted file mode 100644
index f0a4381b686145..00000000000000
--- a/drivers/tty/moxa.h
+++ /dev/null
@@ -1,307 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef MOXA_H_FILE
-#define MOXA_H_FILE
-
-#define	MOXA		0x400
-#define MOXA_GET_IQUEUE 	(MOXA + 1)	/* get input buffered count */
-#define MOXA_GET_OQUEUE 	(MOXA + 2)	/* get output buffered count */
-#define MOXA_GETDATACOUNT       (MOXA + 23)
-#define MOXA_GET_IOQUEUE	(MOXA + 27)
-#define MOXA_FLUSH_QUEUE	(MOXA + 28)
-#define MOXA_GETMSTATUS         (MOXA + 65)
-
-/*
- *    System Configuration
- */
-
-#define Magic_code	0x404
-
-/*
- *    for C218 BIOS initialization
- */
-#define C218_ConfBase	0x800
-#define C218_status	(C218_ConfBase + 0)	/* BIOS running status    */
-#define C218_diag	(C218_ConfBase + 2)	/* diagnostic status      */
-#define C218_key	(C218_ConfBase + 4)	/* WORD (0x218 for C218) */
-#define C218DLoad_len	(C218_ConfBase + 6)	/* WORD           */
-#define C218check_sum	(C218_ConfBase + 8)	/* BYTE           */
-#define C218chksum_ok	(C218_ConfBase + 0x0a)	/* BYTE (1:ok)            */
-#define C218_TestRx	(C218_ConfBase + 0x10)	/* 8 bytes for 8 ports    */
-#define C218_TestTx	(C218_ConfBase + 0x18)	/* 8 bytes for 8 ports    */
-#define C218_RXerr	(C218_ConfBase + 0x20)	/* 8 bytes for 8 ports    */
-#define C218_ErrFlag	(C218_ConfBase + 0x28)	/* 8 bytes for 8 ports    */
-
-#define C218_LoadBuf	0x0F00
-#define C218_KeyCode	0x218
-#define CP204J_KeyCode	0x204
-
-/*
- *    for C320 BIOS initialization
- */
-#define C320_ConfBase	0x800
-#define C320_LoadBuf	0x0f00
-#define STS_init	0x05	/* for C320_status        */
-
-#define C320_status	C320_ConfBase + 0	/* BIOS running status    */
-#define C320_diag	C320_ConfBase + 2	/* diagnostic status      */
-#define C320_key	C320_ConfBase + 4	/* WORD (0320H for C320) */
-#define C320DLoad_len	C320_ConfBase + 6	/* WORD           */
-#define C320check_sum	C320_ConfBase + 8	/* WORD           */
-#define C320chksum_ok	C320_ConfBase + 0x0a	/* WORD (1:ok)            */
-#define C320bapi_len	C320_ConfBase + 0x0c	/* WORD           */
-#define C320UART_no	C320_ConfBase + 0x0e	/* WORD           */
-
-#define C320_KeyCode	0x320
-
-#define FixPage_addr	0x0000	/* starting addr of static page  */
-#define DynPage_addr	0x2000	/* starting addr of dynamic page */
-#define C218_start	0x3000	/* starting addr of C218 BIOS prg */
-#define Control_reg	0x1ff0	/* select page and reset control */
-#define HW_reset	0x80
-
-/*
- *    Function Codes
- */
-#define FC_CardReset	0x80
-#define FC_ChannelReset 1	/* C320 firmware not supported */
-#define FC_EnableCH	2
-#define FC_DisableCH	3
-#define FC_SetParam	4
-#define FC_SetMode	5
-#define FC_SetRate	6
-#define FC_LineControl	7
-#define FC_LineStatus	8
-#define FC_XmitControl	9
-#define FC_FlushQueue	10
-#define FC_SendBreak	11
-#define FC_StopBreak	12
-#define FC_LoopbackON	13
-#define FC_LoopbackOFF	14
-#define FC_ClrIrqTable	15
-#define FC_SendXon	16
-#define FC_SetTermIrq	17	/* C320 firmware not supported */
-#define FC_SetCntIrq	18	/* C320 firmware not supported */
-#define FC_SetBreakIrq	19
-#define FC_SetLineIrq	20
-#define FC_SetFlowCtl	21
-#define FC_GenIrq	22
-#define FC_InCD180	23
-#define FC_OutCD180	24
-#define FC_InUARTreg	23
-#define FC_OutUARTreg	24
-#define FC_SetXonXoff	25
-#define FC_OutCD180CCR	26
-#define FC_ExtIQueue	27
-#define FC_ExtOQueue	28
-#define FC_ClrLineIrq	29
-#define FC_HWFlowCtl	30
-#define FC_GetClockRate 35
-#define FC_SetBaud	36
-#define FC_SetDataMode  41
-#define FC_GetCCSR      43
-#define FC_GetDataError 45
-#define FC_RxControl	50
-#define FC_ImmSend	51
-#define FC_SetXonState	52
-#define FC_SetXoffState	53
-#define FC_SetRxFIFOTrig 54
-#define FC_SetTxFIFOCnt 55
-#define FC_UnixRate	56
-#define FC_UnixResetTimer 57
-
-#define	RxFIFOTrig1	0
-#define	RxFIFOTrig4	1
-#define	RxFIFOTrig8	2
-#define	RxFIFOTrig14	3
-
-/*
- *    Dual-Ported RAM
- */
-#define DRAM_global	0
-#define INT_data	(DRAM_global + 0)
-#define Config_base	(DRAM_global + 0x108)
-
-#define IRQindex	(INT_data + 0)
-#define IRQpending	(INT_data + 4)
-#define IRQtable	(INT_data + 8)
-
-/*
- *    Interrupt Status
- */
-#define IntrRx		0x01	/* receiver data O.K.             */
-#define IntrTx		0x02	/* transmit buffer empty  */
-#define IntrFunc	0x04	/* function complete              */
-#define IntrBreak	0x08	/* received break         */
-#define IntrLine	0x10	/* line status change
-				   for transmitter                */
-#define IntrIntr	0x20	/* received INTR code             */
-#define IntrQuit	0x40	/* received QUIT code             */
-#define IntrEOF 	0x80	/* received EOF code              */
-
-#define IntrRxTrigger 	0x100	/* rx data count reach trigger value */
-#define IntrTxTrigger 	0x200	/* tx data count below trigger value */
-
-#define Magic_no	(Config_base + 0)
-#define Card_model_no	(Config_base + 2)
-#define Total_ports	(Config_base + 4)
-#define Module_cnt	(Config_base + 8)
-#define Module_no	(Config_base + 10)
-#define Timer_10ms	(Config_base + 14)
-#define Disable_IRQ	(Config_base + 20)
-#define TMS320_PORT1	(Config_base + 22)
-#define TMS320_PORT2	(Config_base + 24)
-#define TMS320_CLOCK	(Config_base + 26)
-
-/*
- *    DATA BUFFER in DRAM
- */
-#define Extern_table	0x400	/* Base address of the external table
-				   (24 words *    64) total 3K bytes
-				   (24 words * 128) total 6K bytes */
-#define Extern_size	0x60	/* 96 bytes                       */
-#define RXrptr		0x00	/* read pointer for RX buffer     */
-#define RXwptr		0x02	/* write pointer for RX buffer    */
-#define TXrptr		0x04	/* read pointer for TX buffer     */
-#define TXwptr		0x06	/* write pointer for TX buffer    */
-#define HostStat	0x08	/* IRQ flag and general flag      */
-#define FlagStat	0x0A
-#define FlowControl	0x0C	/* B7 B6 B5 B4 B3 B2 B1 B0              */
-				/*  x  x  x  x  |  |  |  |            */
-				/*              |  |  |  + CTS flow   */
-				/*              |  |  +--- RTS flow   */
-				/*              |  +------ TX Xon/Xoff */
-				/*              +--------- RX Xon/Xoff */
-#define Break_cnt	0x0E	/* received break count   */
-#define CD180TXirq	0x10	/* if non-0: enable TX irq        */
-#define RX_mask 	0x12
-#define TX_mask 	0x14
-#define Ofs_rxb 	0x16
-#define Ofs_txb 	0x18
-#define Page_rxb	0x1A
-#define Page_txb	0x1C
-#define EndPage_rxb	0x1E
-#define EndPage_txb	0x20
-#define Data_error	0x22
-#define RxTrigger	0x28
-#define TxTrigger	0x2a
-
-#define rRXwptr 	0x34
-#define Low_water	0x36
-
-#define FuncCode	0x40
-#define FuncArg 	0x42
-#define FuncArg1	0x44
-
-#define C218rx_size	0x2000	/* 8K bytes */
-#define C218tx_size	0x8000	/* 32K bytes */
-
-#define C218rx_mask	(C218rx_size - 1)
-#define C218tx_mask	(C218tx_size - 1)
-
-#define C320p8rx_size	0x2000
-#define C320p8tx_size	0x8000
-#define C320p8rx_mask	(C320p8rx_size - 1)
-#define C320p8tx_mask	(C320p8tx_size - 1)
-
-#define C320p16rx_size	0x2000
-#define C320p16tx_size	0x4000
-#define C320p16rx_mask	(C320p16rx_size - 1)
-#define C320p16tx_mask	(C320p16tx_size - 1)
-
-#define C320p24rx_size	0x2000
-#define C320p24tx_size	0x2000
-#define C320p24rx_mask	(C320p24rx_size - 1)
-#define C320p24tx_mask	(C320p24tx_size - 1)
-
-#define C320p32rx_size	0x1000
-#define C320p32tx_size	0x1000
-#define C320p32rx_mask	(C320p32rx_size - 1)
-#define C320p32tx_mask	(C320p32tx_size - 1)
-
-#define Page_size	0x2000U
-#define Page_mask	(Page_size - 1)
-#define C218rx_spage	3
-#define C218tx_spage	4
-#define C218rx_pageno	1
-#define C218tx_pageno	4
-#define C218buf_pageno	5
-
-#define C320p8rx_spage	3
-#define C320p8tx_spage	4
-#define C320p8rx_pgno	1
-#define C320p8tx_pgno	4
-#define C320p8buf_pgno	5
-
-#define C320p16rx_spage 3
-#define C320p16tx_spage 4
-#define C320p16rx_pgno	1
-#define C320p16tx_pgno	2
-#define C320p16buf_pgno 3
-
-#define C320p24rx_spage 3
-#define C320p24tx_spage 4
-#define C320p24rx_pgno	1
-#define C320p24tx_pgno	1
-#define C320p24buf_pgno 2
-
-#define C320p32rx_spage 3
-#define C320p32tx_ofs	C320p32rx_size
-#define C320p32tx_spage 3
-#define C320p32buf_pgno 1
-
-/*
- *    Host Status
- */
-#define WakeupRx	0x01
-#define WakeupTx	0x02
-#define WakeupBreak	0x08
-#define WakeupLine	0x10
-#define WakeupIntr	0x20
-#define WakeupQuit	0x40
-#define WakeupEOF	0x80	/* used in VTIME control */
-#define WakeupRxTrigger	0x100
-#define WakeupTxTrigger	0x200
-/*
- *    Flag status
- */
-#define Rx_over		0x01
-#define Xoff_state	0x02
-#define Tx_flowOff	0x04
-#define Tx_enable	0x08
-#define CTS_state	0x10
-#define DSR_state	0x20
-#define DCD_state	0x80
-/*
- *    FlowControl
- */
-#define CTS_FlowCtl	1
-#define RTS_FlowCtl	2
-#define Tx_FlowCtl	4
-#define Rx_FlowCtl	8
-#define IXM_IXANY	0x10
-
-#define LowWater	128
-
-#define DTR_ON		1
-#define RTS_ON		2
-#define CTS_ON		1
-#define DSR_ON		2
-#define DCD_ON		8
-
-/* mode definition */
-#define	MX_CS8		0x03
-#define	MX_CS7		0x02
-#define	MX_CS6		0x01
-#define	MX_CS5		0x00
-
-#define	MX_STOP1	0x00
-#define	MX_STOP15	0x04
-#define	MX_STOP2	0x08
-
-#define	MX_PARNONE	0x00
-#define	MX_PAREVEN	0x40
-#define	MX_PARODD	0xC0
-#define	MX_PARMARK	0xA0
-#define	MX_PARSPACE	0x20
-
-#endif
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 1d92d2a848894d..c98a04595084ed 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -271,6 +271,10 @@ static DEFINE_SPINLOCK(gsm_mux_lock);
 
 static struct tty_driver *gsm_tty_driver;
 
+/* Save dlci open address */
+static int addr_open[256] = { 0 };
+/* Save dlci open count */
+static int addr_cnt;
 /*
  *	This section of the driver logic implements the GSM encodings
  *	both the basic and the 'advanced'. Reliable transport is not
@@ -587,6 +591,10 @@ static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control)
 		return;
 	}
 	gsmld_output(gsm, cbuf, len);
+	if (!gsm->initiator) {
+		cr = cr & gsm->initiator;
+		control = control & ~PF;
+	}
 	gsm_print_packet("-->", addr, cr, control, NULL, 0);
 }
 
@@ -601,7 +609,7 @@ static void gsm_send(struct gsm_mux *gsm, int addr, int cr, int control)
 
 static inline void gsm_response(struct gsm_mux *gsm, int addr, int control)
 {
-	gsm_send(gsm, addr, 0, control);
+	gsm_send(gsm, addr, 1, control);
 }
 
 /**
@@ -1177,6 +1185,7 @@ static void gsm_control_rls(struct gsm_mux *gsm, const u8 *data, int clen)
 }
 
 static void gsm_dlci_begin_close(struct gsm_dlci *dlci);
+static void gsm_dlci_close(struct gsm_dlci *dlci);
 
 /**
  *	gsm_control_message	-	DLCI 0 control processing
@@ -1195,15 +1204,28 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
 {
 	u8 buf[1];
 	unsigned long flags;
+	struct gsm_dlci *dlci;
+	int i;
+	int address;
 
 	switch (command) {
 	case CMD_CLD: {
-		struct gsm_dlci *dlci = gsm->dlci[0];
+		if (addr_cnt > 0) {
+			for (i = 0; i < addr_cnt; i++) {
+				address = addr_open[i];
+				dlci = gsm->dlci[address];
+				gsm_dlci_close(dlci);
+				addr_open[i] = 0;
+			}
+		}
 		/* Modem wishes to close down */
+		dlci = gsm->dlci[0];
 		if (dlci) {
 			dlci->dead = true;
 			gsm->dead = true;
-			gsm_dlci_begin_close(dlci);
+			gsm_dlci_close(dlci);
+			addr_cnt = 0;
+			gsm_response(gsm, 0, UA|PF);
 		}
 		}
 		break;
@@ -1429,6 +1451,8 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
 		kfifo_reset(&dlci->fifo);
 	} else
 		dlci->gsm->dead = true;
+	/* Unregister gsmtty driver,report gsmtty dev remove uevent for user */
+	tty_unregister_device(gsm_tty_driver, dlci->addr);
 	wake_up(&dlci->gsm->event);
 	/* A DLCI 0 close is a MUX termination so we need to kick that
 	   back to userspace somehow */
@@ -1450,6 +1474,8 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
 	dlci->state = DLCI_OPEN;
 	if (debug & 8)
 		pr_debug("DLCI %d goes open.\n", dlci->addr);
+	/* Register gsmtty driver,report gsmtty dev add uevent for user */
+	tty_register_device(gsm_tty_driver, dlci->addr, NULL);
 	wake_up(&dlci->gsm->event);
 }
 
@@ -1748,6 +1774,7 @@ static void gsm_queue(struct gsm_mux *gsm)
 	struct gsm_dlci *dlci;
 	u8 cr;
 	int address;
+	int i, j, k, address_tmp;
 	/* We have to sneak a look at the packet body to do the FCS.
 	   A somewhat layering violation in the spec */
 
@@ -1779,29 +1806,59 @@ static void gsm_queue(struct gsm_mux *gsm)
 
 	switch (gsm->control) {
 	case SABM|PF:
-		if (cr == 0)
+		if (cr == 1)
 			goto invalid;
 		if (dlci == NULL)
 			dlci = gsm_dlci_alloc(gsm, address);
 		if (dlci == NULL)
 			return;
 		if (dlci->dead)
-			gsm_response(gsm, address, DM);
+			gsm_response(gsm, address, DM|PF);
 		else {
-			gsm_response(gsm, address, UA);
+			gsm_response(gsm, address, UA|PF);
 			gsm_dlci_open(dlci);
+			/* Save dlci open address */
+			if (address) {
+				addr_open[addr_cnt] = address;
+				addr_cnt++;
+			}
 		}
 		break;
 	case DISC|PF:
-		if (cr == 0)
+		if (cr == 1)
 			goto invalid;
 		if (dlci == NULL || dlci->state == DLCI_CLOSED) {
-			gsm_response(gsm, address, DM);
+			gsm_response(gsm, address, DM|PF);
 			return;
 		}
 		/* Real close complete */
-		gsm_response(gsm, address, UA);
-		gsm_dlci_close(dlci);
+		if (!address) {
+			if (addr_cnt > 0) {
+				for (i = 0; i < addr_cnt; i++) {
+					address = addr_open[i];
+					dlci = gsm->dlci[address];
+					gsm_dlci_close(dlci);
+					addr_open[i] = 0;
+				}
+			}
+			dlci = gsm->dlci[0];
+			gsm_dlci_close(dlci);
+			addr_cnt = 0;
+			gsm_response(gsm, 0, UA|PF);
+		} else {
+			gsm_response(gsm, address, UA|PF);
+			gsm_dlci_close(dlci);
+			/* clear dlci address */
+			for (j = 0; j < addr_cnt; j++) {
+				address_tmp = addr_open[j];
+				if (address_tmp == address) {
+					for (k = j; k < addr_cnt; k++)
+						addr_open[k] = addr_open[k+1];
+				addr_cnt--;
+				break;
+				}
+			}
+		}
 		break;
 	case UA:
 	case UA|PF:
@@ -2300,7 +2357,7 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
 	 * configuration
 	 */
 
-	if (need_close || need_restart) {
+	if (gsm->initiator && (need_close || need_restart)) {
 		int ret;
 
 		ret = gsm_disconnect(gsm);
@@ -2384,17 +2441,19 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
 	else {
 		/* Don't register device 0 - this is the control channel and not
 		   a usable tty interface */
-		base = mux_num_to_base(gsm); /* Base for this MUX */
-		for (i = 1; i < NUM_DLCI; i++) {
-			struct device *dev;
+		if (gsm->initiator) {
+			base = mux_num_to_base(gsm); /* Base for this MUX */
+			for (i = 1; i < NUM_DLCI; i++) {
+				struct device *dev;
 
-			dev = tty_register_device(gsm_tty_driver,
+				dev = tty_register_device(gsm_tty_driver,
 							base + i, NULL);
-			if (IS_ERR(dev)) {
-				for (i--; i >= 1; i--)
-					tty_unregister_device(gsm_tty_driver,
-								base + i);
-				return PTR_ERR(dev);
+				if (IS_ERR(dev)) {
+					for (i--; i >= 1; i--)
+						tty_unregister_device(gsm_tty_driver,
+									base + i);
+					return PTR_ERR(dev);
+				}
 			}
 		}
 	}
@@ -2416,8 +2475,10 @@ static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
 	int i;
 
 	WARN_ON(tty != gsm->tty);
-	for (i = 1; i < NUM_DLCI; i++)
-		tty_unregister_device(gsm_tty_driver, base + i);
+	if (gsm->initiator) {
+		for (i = 1; i < NUM_DLCI; i++)
+			tty_unregister_device(gsm_tty_driver, base + i);
+	}
 	gsm_cleanup_mux(gsm);
 	tty_kref_put(gsm->tty);
 	gsm->tty = NULL;
@@ -2651,7 +2712,7 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
 		base = mux_num_to_base(gsm);
 		return put_user(base + 1, (__u32 __user *)arg);
 	default:
-		return n_tty_ioctl_helper(tty, file, cmd, arg);
+		return n_tty_ioctl_helper(tty, cmd, arg);
 	}
 }
 
@@ -3000,6 +3061,7 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
 {
 	struct gsm_dlci *dlci = tty->driver_data;
 	struct tty_port *port = &dlci->port;
+	struct gsm_mux *gsm = dlci->gsm;
 
 	port->count++;
 	tty_port_tty_set(port, tty);
@@ -3009,7 +3071,8 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
 	   a DM straight back. This is ok as that will have caused a hangup */
 	tty_port_set_initialized(port, 1);
 	/* Start sending off SABM messages */
-	gsm_dlci_begin_open(dlci);
+	if (gsm->initiator)
+		gsm_dlci_begin_open(dlci);
 	/* And wait for virtual carrier */
 	return tty_port_block_til_ready(port, tty, filp);
 }
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 580a37b3fe1b9b..7e0884ecc74f52 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -630,7 +630,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
 		fallthrough;	/* to default */
 
 	default:
-		error = n_tty_ioctl_helper(tty, file, cmd, arg);
+		error = n_tty_ioctl_helper(tty, cmd, arg);
 		break;
 	}
 	return error;
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0ec93f1a61f5da..5be6d02dc690b1 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2418,7 +2418,7 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
 		up_write(&tty->termios_rwsem);
 		return put_user(retval, (unsigned int __user *) arg);
 	default:
-		return n_tty_ioctl_helper(tty, file, cmd, arg);
+		return n_tty_ioctl_helper(tty, cmd, arg);
 	}
 }
 
@@ -2450,7 +2450,6 @@ void n_tty_inherit_ops(struct tty_ldisc_ops *ops)
 {
 	*ops = n_tty_ops;
 	ops->owner = NULL;
-	ops->flags = 0;
 }
 EXPORT_SYMBOL_GPL(n_tty_inherit_ops);
 
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index fc65a2293ce9e3..9c01c531349dfd 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -23,10 +23,6 @@
 
 #include "8250.h"
 
-struct fsl8250_data {
-	int	line;
-};
-
 int fsl8250_handle_irq(struct uart_port *port)
 {
 	unsigned char lsr, orig_lsr;
@@ -90,6 +86,10 @@ int fsl8250_handle_irq(struct uart_port *port)
 EXPORT_SYMBOL_GPL(fsl8250_handle_irq);
 
 #ifdef CONFIG_ACPI
+struct fsl8250_data {
+	int	line;
+};
+
 static int fsl8250_acpi_probe(struct platform_device *pdev)
 {
 	struct fsl8250_data *data;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 726912b16a5593..93159557a2fb12 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -3981,9 +3981,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
 			nr_ports = rc;
 	}
 
-	priv = kzalloc(sizeof(struct serial_private) +
-		       sizeof(unsigned int) * nr_ports,
-		       GFP_KERNEL);
+	priv = kzalloc(struct_size(priv, line, nr_ports), GFP_KERNEL);
 	if (!priv) {
 		priv = ERR_PTR(-ENOMEM);
 		goto err_deinit;
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 98e5ee4d0d08a8..1974bbadc97561 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -56,10 +56,6 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"BRI1400",		0	},
 	/* Boca 33.6 Kbps Internal FD34FSVD */
 	{	"BRI3400",		0	},
-	/* Boca 33.6 Kbps Internal FD34FSVD */
-	{	"BRI0A49",		0	},
-	/* Best Data Products Inc. Smart One 336F PnP Modem */
-	{	"BDP3336",		0	},
 	/* Computer Peripherals Inc */
 	/* EuroViVa CommCenter-33.6 SP PnP */
 	{	"CPI4050",		0	},
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 71ae16de0f90e0..808268edd2e82a 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -376,7 +376,7 @@ config SERIAL_8250_DW
 config SERIAL_8250_EM
 	tristate "Support for Emma Mobile integrated serial port"
 	depends on SERIAL_8250 && HAVE_CLK
-	depends on ARM || COMPILE_TEST
+	depends on (ARM && ARCH_RENESAS) || COMPILE_TEST
 	help
 	  Selecting this option will add support for the integrated serial
 	  port hardware found on the Emma Mobile line of processors.
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index dfc1ba4e157242..d3d9566e5dbdf8 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -8,6 +8,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/bitfield.h>
 #include <linux/console.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
@@ -63,9 +64,18 @@
 static struct uart_port *console_port;
 #endif
 
+/**
+ * struct uartlite_data: Driver private data
+ * reg_ops: Functions to read/write registers
+ * clk: Our parent clock, if present
+ * baud: The baud rate configured when this device was synthesized
+ * cflags: The cflags for parity and data bits
+ */
 struct uartlite_data {
 	const struct uartlite_reg_ops *reg_ops;
 	struct clk *clk;
+	unsigned int baud;
+	tcflag_t cflags;
 };
 
 struct uartlite_reg_ops {
@@ -119,6 +129,8 @@ static inline void uart_out32(u32 val, u32 offset, struct uart_port *port)
 
 static struct uart_port ulite_ports[ULITE_NR_UARTS];
 
+static struct uart_driver ulite_uart_driver;
+
 /* ---------------------------------------------------------------------
  * Core UART driver operations
  */
@@ -306,7 +318,12 @@ static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
 			      struct ktermios *old)
 {
 	unsigned long flags;
-	unsigned int baud;
+	struct uartlite_data *pdata = port->private_data;
+
+	/* Set termios to what the hardware supports */
+	termios->c_cflag &= ~(BRKINT | CSTOPB | PARENB | PARODD | CSIZE);
+	termios->c_cflag |= pdata->cflags & (PARENB | PARODD | CSIZE);
+	tty_termios_encode_baud_rate(termios, pdata->baud, pdata->baud);
 
 	spin_lock_irqsave(&port->lock, flags);
 
@@ -329,8 +346,7 @@ static void ulite_set_termios(struct uart_port *port, struct ktermios *termios,
 			| ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
 
 	/* update timeout */
-	baud = uart_get_baud_rate(port, termios, old, 0, 460800);
-	uart_update_timeout(port, termios->c_cflag, baud);
+	uart_update_timeout(port, termios->c_cflag, pdata->baud);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -532,8 +548,6 @@ static int ulite_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-static struct uart_driver ulite_uart_driver;
-
 static struct console ulite_console = {
 	.name	= ULITE_NAME,
 	.write	= ulite_console_write,
@@ -765,18 +779,73 @@ static int ulite_probe(struct platform_device *pdev)
 	struct uartlite_data *pdata;
 	int irq, ret;
 	int id = pdev->id;
-#ifdef CONFIG_OF
-	const __be32 *prop;
 
-	prop = of_get_property(pdev->dev.of_node, "port-number", NULL);
-	if (prop)
-		id = be32_to_cpup(prop);
-#endif
 	pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data),
 			     GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
 
+	if (IS_ENABLED(CONFIG_OF)) {
+		const char *prop;
+		struct device_node *np = pdev->dev.of_node;
+		u32 val = 0;
+
+		prop = "port-number";
+		ret = of_property_read_u32(np, prop, &id);
+		if (ret && ret != -EINVAL)
+of_err:
+			return dev_err_probe(&pdev->dev, ret,
+					     "could not read %s\n", prop);
+
+		prop = "current-speed";
+		ret = of_property_read_u32(np, prop, &pdata->baud);
+		if (ret)
+			goto of_err;
+
+		prop = "xlnx,use-parity";
+		ret = of_property_read_u32(np, prop, &val);
+		if (ret && ret != -EINVAL)
+			goto of_err;
+
+		if (val) {
+			prop = "xlnx,odd-parity";
+			ret = of_property_read_u32(np, prop, &val);
+			if (ret)
+				goto of_err;
+
+			if (val)
+				pdata->cflags |= PARODD;
+			pdata->cflags |= PARENB;
+		}
+
+		val = 8;
+		prop = "xlnx,data-bits";
+		ret = of_property_read_u32(np, prop, &val);
+		if (ret && ret != -EINVAL)
+			goto of_err;
+
+		switch (val) {
+		case 5:
+			pdata->cflags |= CS5;
+			break;
+		case 6:
+			pdata->cflags |= CS6;
+			break;
+		case 7:
+			pdata->cflags |= CS7;
+			break;
+		case 8:
+			pdata->cflags |= CS8;
+			break;
+		default:
+			return dev_err_probe(&pdev->dev, -EINVAL,
+					     "bad data bits %d\n", val);
+		}
+	} else {
+		pdata->baud = 9600;
+		pdata->cflags = CS8;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -ENODEV;
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 507a25d692bb1f..63181925ec1ae5 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -675,7 +675,6 @@ static int tty_change_softcar(struct tty_struct *tty, int arg)
 /**
  *	tty_mode_ioctl		-	mode related ioctls
  *	@tty: tty for the ioctl
- *	@file: file pointer for the tty
  *	@cmd: command
  *	@arg: ioctl argument
  *
@@ -684,16 +683,13 @@ static int tty_change_softcar(struct tty_struct *tty, int arg)
  *	consistent mode setting.
  */
 
-int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
-			unsigned int cmd, unsigned long arg)
+int tty_mode_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
 {
 	struct tty_struct *real_tty;
 	void __user *p = (void __user *)arg;
 	int ret = 0;
 	struct ktermios kterm;
 
-	BUG_ON(file == NULL);
-
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 	    tty->driver->subtype == PTY_TYPE_MASTER)
 		real_tty = tty->link;
@@ -858,8 +854,8 @@ int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
 }
 EXPORT_SYMBOL_GPL(tty_perform_flush);
 
-int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
-		       unsigned int cmd, unsigned long arg)
+int n_tty_ioctl_helper(struct tty_struct *tty, unsigned int cmd,
+		unsigned long arg)
 {
 	int retval;
 
@@ -904,7 +900,7 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
 		return __tty_perform_flush(tty, arg);
 	default:
 		/* Try the mode commands */
-		return tty_mode_ioctl(tty, file, cmd, arg);
+		return tty_mode_ioctl(tty, cmd, arg);
 	}
 }
 EXPORT_SYMBOL(n_tty_ioctl_helper);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 168e57e40bbb81..5dbd7c5afac760 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -252,20 +252,20 @@ static inline bool tty_throttled(struct tty_struct *tty)
 }
 
 #ifdef CONFIG_TTY
-extern void tty_kref_put(struct tty_struct *tty);
-extern struct pid *tty_get_pgrp(struct tty_struct *tty);
-extern void tty_vhangup_self(void);
-extern void disassociate_ctty(int priv);
-extern dev_t tty_devnum(struct tty_struct *tty);
-extern void proc_clear_tty(struct task_struct *p);
-extern struct tty_struct *get_current_tty(void);
+void tty_kref_put(struct tty_struct *tty);
+struct pid *tty_get_pgrp(struct tty_struct *tty);
+void tty_vhangup_self(void);
+void disassociate_ctty(int priv);
+dev_t tty_devnum(struct tty_struct *tty);
+void proc_clear_tty(struct task_struct *p);
+struct tty_struct *get_current_tty(void);
 /* tty_io.c */
-extern int __init tty_init(void);
-extern const char *tty_name(const struct tty_struct *tty);
-extern struct tty_struct *tty_kopen_exclusive(dev_t device);
-extern struct tty_struct *tty_kopen_shared(dev_t device);
-extern void tty_kclose(struct tty_struct *tty);
-extern int tty_dev_name_to_number(const char *name, dev_t *number);
+int __init tty_init(void);
+const char *tty_name(const struct tty_struct *tty);
+struct tty_struct *tty_kopen_exclusive(dev_t device);
+struct tty_struct *tty_kopen_shared(dev_t device);
+void tty_kclose(struct tty_struct *tty);
+int tty_dev_name_to_number(const char *name, dev_t *number);
 #else
 static inline void tty_kref_put(struct tty_struct *tty)
 { }
@@ -296,7 +296,7 @@ static inline int tty_dev_name_to_number(const char *name, dev_t *number)
 
 extern struct ktermios tty_std_termios;
 
-extern int vcs_init(void);
+int vcs_init(void);
 
 extern struct class *tty_class;
 
@@ -316,34 +316,34 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty)
 	return tty;
 }
 
-extern const char *tty_driver_name(const struct tty_struct *tty);
-extern void tty_wait_until_sent(struct tty_struct *tty, long timeout);
-extern void stop_tty(struct tty_struct *tty);
-extern void start_tty(struct tty_struct *tty);
-extern void tty_write_message(struct tty_struct *tty, char *msg);
-extern int tty_send_xchar(struct tty_struct *tty, char ch);
-extern int tty_put_char(struct tty_struct *tty, unsigned char c);
-extern unsigned int tty_chars_in_buffer(struct tty_struct *tty);
-extern unsigned int tty_write_room(struct tty_struct *tty);
-extern void tty_driver_flush_buffer(struct tty_struct *tty);
-extern void tty_unthrottle(struct tty_struct *tty);
-extern int tty_throttle_safe(struct tty_struct *tty);
-extern int tty_unthrottle_safe(struct tty_struct *tty);
-extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
-extern int tty_get_icount(struct tty_struct *tty,
-			  struct serial_icounter_struct *icount);
-extern int is_current_pgrp_orphaned(void);
-extern void tty_hangup(struct tty_struct *tty);
-extern void tty_vhangup(struct tty_struct *tty);
-extern int tty_hung_up_p(struct file *filp);
-extern void do_SAK(struct tty_struct *tty);
-extern void __do_SAK(struct tty_struct *tty);
-extern void no_tty(void);
-extern speed_t tty_termios_baud_rate(struct ktermios *termios);
-extern void tty_termios_encode_baud_rate(struct ktermios *termios,
-						speed_t ibaud, speed_t obaud);
-extern void tty_encode_baud_rate(struct tty_struct *tty,
-						speed_t ibaud, speed_t obaud);
+const char *tty_driver_name(const struct tty_struct *tty);
+void tty_wait_until_sent(struct tty_struct *tty, long timeout);
+void stop_tty(struct tty_struct *tty);
+void start_tty(struct tty_struct *tty);
+void tty_write_message(struct tty_struct *tty, char *msg);
+int tty_send_xchar(struct tty_struct *tty, char ch);
+int tty_put_char(struct tty_struct *tty, unsigned char c);
+unsigned int tty_chars_in_buffer(struct tty_struct *tty);
+unsigned int tty_write_room(struct tty_struct *tty);
+void tty_driver_flush_buffer(struct tty_struct *tty);
+void tty_unthrottle(struct tty_struct *tty);
+int tty_throttle_safe(struct tty_struct *tty);
+int tty_unthrottle_safe(struct tty_struct *tty);
+int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
+int tty_get_icount(struct tty_struct *tty,
+		struct serial_icounter_struct *icount);
+int is_current_pgrp_orphaned(void);
+void tty_hangup(struct tty_struct *tty);
+void tty_vhangup(struct tty_struct *tty);
+int tty_hung_up_p(struct file *filp);
+void do_SAK(struct tty_struct *tty);
+void __do_SAK(struct tty_struct *tty);
+void no_tty(void);
+speed_t tty_termios_baud_rate(struct ktermios *termios);
+void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud,
+		speed_t obaud);
+void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud,
+		speed_t obaud);
 
 /**
  *	tty_get_baud_rate	-	get tty bit rates
@@ -363,37 +363,36 @@ static inline speed_t tty_get_baud_rate(struct tty_struct *tty)
 unsigned char tty_get_char_size(unsigned int cflag);
 unsigned char tty_get_frame_size(unsigned int cflag);
 
-extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
-extern int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b);
-extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
+void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
+int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b);
+int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
 
-extern void tty_wakeup(struct tty_struct *tty);
+void tty_wakeup(struct tty_struct *tty);
 
-extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
-			unsigned int cmd, unsigned long arg);
-extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
-extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
-extern void tty_release_struct(struct tty_struct *tty, int idx);
-extern void tty_init_termios(struct tty_struct *tty);
-extern void tty_save_termios(struct tty_struct *tty);
-extern int tty_standard_install(struct tty_driver *driver,
+int tty_mode_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
+int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
+struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
+void tty_release_struct(struct tty_struct *tty, int idx);
+void tty_init_termios(struct tty_struct *tty);
+void tty_save_termios(struct tty_struct *tty);
+int tty_standard_install(struct tty_driver *driver,
 		struct tty_struct *tty);
 
 extern struct mutex tty_mutex;
 
 /* n_tty.c */
-extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
+void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
 #ifdef CONFIG_TTY
-extern void __init n_tty_init(void);
+void __init n_tty_init(void);
 #else
 static inline void n_tty_init(void) { }
 #endif
 
 /* tty_audit.c */
 #ifdef CONFIG_AUDIT
-extern void tty_audit_exit(void);
-extern void tty_audit_fork(struct signal_struct *sig);
-extern int tty_audit_push(void);
+void tty_audit_exit(void);
+void tty_audit_fork(struct signal_struct *sig);
+int tty_audit_push(void);
 #else
 static inline void tty_audit_exit(void)
 {
@@ -408,24 +407,23 @@ static inline int tty_audit_push(void)
 #endif
 
 /* tty_ioctl.c */
-extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
-		       unsigned int cmd, unsigned long arg);
+int n_tty_ioctl_helper(struct tty_struct *tty, unsigned int cmd,
+		unsigned long arg);
 
 /* vt.c */
 
-extern int vt_ioctl(struct tty_struct *tty,
-		    unsigned int cmd, unsigned long arg);
+int vt_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
 
-extern long vt_compat_ioctl(struct tty_struct *tty,
-		     unsigned int cmd, unsigned long arg);
+long vt_compat_ioctl(struct tty_struct *tty, unsigned int cmd,
+		unsigned long arg);
 
 /* tty_mutex.c */
 /* functions for preparation of BKL removal */
-extern void tty_lock(struct tty_struct *tty);
-extern int  tty_lock_interruptible(struct tty_struct *tty);
-extern void tty_unlock(struct tty_struct *tty);
-extern void tty_lock_slave(struct tty_struct *tty);
-extern void tty_unlock_slave(struct tty_struct *tty);
-extern void tty_set_lock_subclass(struct tty_struct *tty);
+void tty_lock(struct tty_struct *tty);
+int  tty_lock_interruptible(struct tty_struct *tty);
+void tty_unlock(struct tty_struct *tty);
+void tty_lock_slave(struct tty_struct *tty);
+void tty_unlock_slave(struct tty_struct *tty);
+void tty_set_lock_subclass(struct tty_struct *tty);
 
 #endif
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index c20431d8def8f2..29e1cf178afbf2 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -327,11 +327,11 @@ struct tty_driver {
 
 extern struct list_head tty_drivers;
 
-extern struct tty_driver *__tty_alloc_driver(unsigned int lines,
-		struct module *owner, unsigned long flags);
-extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
+struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner,
+		unsigned long flags);
+struct tty_driver *tty_find_polling_driver(char *name, int *line);
 
-extern void tty_driver_kref_put(struct tty_driver *driver);
+void tty_driver_kref_put(struct tty_driver *driver);
 
 /* Use TTY_DRIVER_* flags below */
 #define tty_alloc_driver(lines, flags) \
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index 32284992b31a00..9916acb5de495f 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -7,16 +7,16 @@
 
 struct tty_ldisc;
 
-extern int tty_buffer_set_limit(struct tty_port *port, int limit);
-extern unsigned int tty_buffer_space_avail(struct tty_port *port);
-extern int tty_buffer_request_room(struct tty_port *port, size_t size);
-extern int tty_insert_flip_string_flags(struct tty_port *port,
+int tty_buffer_set_limit(struct tty_port *port, int limit);
+unsigned int tty_buffer_space_avail(struct tty_port *port);
+int tty_buffer_request_room(struct tty_port *port, size_t size);
+int tty_insert_flip_string_flags(struct tty_port *port,
 		const unsigned char *chars, const char *flags, size_t size);
-extern int tty_insert_flip_string_fixed_flag(struct tty_port *port,
+int tty_insert_flip_string_fixed_flag(struct tty_port *port,
 		const unsigned char *chars, char flag, size_t size);
-extern int tty_prepare_flip_string(struct tty_port *port,
-		unsigned char **chars, size_t size);
-extern void tty_flip_buffer_push(struct tty_port *port);
+int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars,
+		size_t size);
+void tty_flip_buffer_push(struct tty_port *port);
 void tty_schedule_flip(struct tty_port *port);
 int __tty_insert_flip_char(struct tty_port *port, unsigned char ch, char flag);
 
@@ -45,7 +45,7 @@ static inline int tty_insert_flip_string(struct tty_port *port,
 int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p,
 		const char *f, int count);
 
-extern void tty_buffer_lock_exclusive(struct tty_port *port);
-extern void tty_buffer_unlock_exclusive(struct tty_port *port);
+void tty_buffer_lock_exclusive(struct tty_port *port);
+void tty_buffer_unlock_exclusive(struct tty_port *port);
 
 #endif /* _LINUX_TTY_FLIP_H */
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index b1d812e902aad6..b85d84fb5f4956 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -146,7 +146,7 @@ struct ld_semaphore {
 #endif
 };
 
-extern void __init_ldsem(struct ld_semaphore *sem, const char *name,
+void __init_ldsem(struct ld_semaphore *sem, const char *name,
 			 struct lock_class_key *key);
 
 #define init_ldsem(sem)						\
@@ -157,18 +157,18 @@ do {								\
 } while (0)
 
 
-extern int ldsem_down_read(struct ld_semaphore *sem, long timeout);
-extern int ldsem_down_read_trylock(struct ld_semaphore *sem);
-extern int ldsem_down_write(struct ld_semaphore *sem, long timeout);
-extern int ldsem_down_write_trylock(struct ld_semaphore *sem);
-extern void ldsem_up_read(struct ld_semaphore *sem);
-extern void ldsem_up_write(struct ld_semaphore *sem);
+int ldsem_down_read(struct ld_semaphore *sem, long timeout);
+int ldsem_down_read_trylock(struct ld_semaphore *sem);
+int ldsem_down_write(struct ld_semaphore *sem, long timeout);
+int ldsem_down_write_trylock(struct ld_semaphore *sem);
+void ldsem_up_read(struct ld_semaphore *sem);
+void ldsem_up_write(struct ld_semaphore *sem);
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
-extern int ldsem_down_read_nested(struct ld_semaphore *sem, int subclass,
-				  long timeout);
-extern int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass,
-				   long timeout);
+int ldsem_down_read_nested(struct ld_semaphore *sem, int subclass,
+		long timeout);
+int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass,
+		long timeout);
 #else
 # define ldsem_down_read_nested(sem, subclass, timeout)		\
 		ldsem_down_read(sem, timeout)
@@ -180,7 +180,6 @@ extern int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass,
 struct tty_ldisc_ops {
 	char	*name;
 	int	num;
-	int	flags;
 
 	/*
 	 * The following routines are called from above.
@@ -200,7 +199,7 @@ struct tty_ldisc_ops {
 	void	(*set_termios)(struct tty_struct *tty, struct ktermios *old);
 	__poll_t (*poll)(struct tty_struct *, struct file *,
 			     struct poll_table_struct *);
-	int	(*hangup)(struct tty_struct *tty);
+	void	(*hangup)(struct tty_struct *tty);
 
 	/*
 	 * The following routines are called from below.
@@ -220,8 +219,6 @@ struct tty_ldisc {
 	struct tty_struct *tty;
 };
 
-#define LDISC_FLAG_DEFINED	0x00000001
-
 #define MODULE_ALIAS_LDISC(ldisc) \
 	MODULE_ALIAS("tty-ldisc-" __stringify(ldisc))
 
diff --git a/net/nfc/nci/uart.c b/net/nfc/nci/uart.c
index 502e7a3f8948b6..9bdd9a7d187ecc 100644
--- a/net/nfc/nci/uart.c
+++ b/net/nfc/nci/uart.c
@@ -349,7 +349,7 @@ static int nci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
 			return -EBUSY;
 		break;
 	default:
-		err = n_tty_ioctl_helper(tty, file, cmd, arg);
+		err = n_tty_ioctl_helper(tty, cmd, arg);
 		break;
 	}
 
diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c
index 13258f3ca9aae7..1af0bf5f1e2f5b 100644
--- a/sound/soc/codecs/cx20442.c
+++ b/sound/soc/codecs/cx20442.c
@@ -252,10 +252,9 @@ static void v253_close(struct tty_struct *tty)
 }
 
 /* Line discipline .hangup() */
-static int v253_hangup(struct tty_struct *tty)
+static void v253_hangup(struct tty_struct *tty)
 {
 	v253_close(tty);
-	return 0;
 }
 
 /* Line discipline .receive_buf() */
diff --git a/sound/soc/ti/ams-delta.c b/sound/soc/ti/ams-delta.c
index ecd24d412a9b01..b1a32545babdb8 100644
--- a/sound/soc/ti/ams-delta.c
+++ b/sound/soc/ti/ams-delta.c
@@ -330,10 +330,9 @@ static void cx81801_close(struct tty_struct *tty)
 }
 
 /* Line discipline .hangup() */
-static int cx81801_hangup(struct tty_struct *tty)
+static void cx81801_hangup(struct tty_struct *tty)
 {
 	cx81801_close(tty);
-	return 0;
 }
 
 /* Line discipline .receive_buf() */