| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the next patches where the worker can be killed while in use, we
need to be able to take the worker mutex and kill queued works for
new IO and flushes, and set some new flags to prevent new
__vhost_vq_attach_worker calls from swapping in/out killed workers.
If we are holding the worker mutex during a flush and the flush's work
is still in the queue, the worker code that will handle the SIGKILL
cleanup won't be able to take the mutex and perform it's cleanup. So
this patch has us drop the worker mutex while waiting for the flush
to complete.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-8-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
__vhost_vq_attach_worker uses the vhost_dev mutex to serialize the
swapping of a virtqueue's worker. This was done for simplicity because
we are already holding that mutex.
In the next patches where the worker can be killed while in use, we need
finer grained locking because some drivers will hold the vhost_dev mutex
while flushing. However in the SIGKILL handler in the next patches, we
will need to be able to swap workers (set current one to NULL), kill
queued works and stop new flushes while flushes are in progress.
To prepare us, this has us use the virtqueue mutex for swapping workers
instead of the vhost_dev one.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-7-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost_vq_work_queue will never fail when queueing the TMF's response
handling because a guest can only send us TMFs when the device is fully
setup so there is always a worker at that time. In the next patches we
will modify the worker code so it handles SIGKILL by exiting before
outstanding commands/TMFs have sent their responses. In that case
vhost_vq_work_queue can fail when we try to send a response.
This has us just free the TMF's resources since at this time the guest
won't be able to get a response even if we could send it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-6-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost_vq_flush is no longer used so remove it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-5-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We flush all the workers that are not also used by the ctl vq to make
sure that responses queued by LIO before the TMF response are sent
before the TMF response. This requires a special vhost_vq_flush
function which, in the next patches where we handle SIGKILL killing
workers while in use, will require extra locking/complexity. To avoid
that, this patch has us flush the entire device from the system work
queue, then queue up sending the response from there.
This is a little less optimal since we now flush all workers but this
will be ok since commands have already timed out and perf is not a
concern.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-4-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In the next patches we will support the vhost_task being killed while in
use. The problem for vhost-scsi is that we can't free some structs until
we get responses for commands we have submitted to the target layer and
we currently process the responses from the vhost_task.
This has just drop the responses and free the command's resources. When
all commands have completed then operations like flush will be woken up
and we can complete device release and endpoint cleanup.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-3-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently, we can try to queue an event's work before the vhost_task is
created. When this happens we just drop it in vhost_scsi_do_plug before
even calling vhost_vq_work_queue. During a device shutdown we do the
same thing after vhost_scsi_clear_endpoint has cleared the backends.
In the next patches we will be able to kill the vhost_task before we
have cleared the endpoint. In that case, vhost_vq_work_queue can fail
and we will leak the event's memory. This has handle the failure by
just freeing the event. This is safe to do, because
vhost_vq_work_queue will only return failure for us when the vhost_task
is killed and so userspace will not be able to handle events if we
sent them.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20240316004707.45557-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() will be converted as weel if they have.
Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
CC: virtualization@lists.linux.dev
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Message-Id: <20240314095853.1326111-1-lizhijian@fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In the vp_vdpa_set_status function, when setting the device status to
VIRTIO_CONFIG_S_DRIVER_OK, the vp_vdpa_request_irq function may fail.
In such cases, the device status should not be set to DRIVER_OK. Add
exception printing to remind the user.
Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com>
Message-Id: <20240325105448.235-1-gavin.liu@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
TIF_FOREIGN_FPSTATE is a 'convenience' flag that should reflect whether
the current CPU holds the most recent user mode FP/SIMD state of the
current task. It combines two conditions:
- whether the current CPU's FP/SIMD state belongs to the task;
- whether that state is the most recent associated with the task (as a
task may have executed on other CPUs as well).
When a task is scheduled in and TIF_KERNEL_FPSTATE is set, it means the
task was in a kernel mode NEON section when it was scheduled out, and so
the kernel mode FP/SIMD state is restored. Since this implies that the
current CPU is *not* holding the most recent user mode FP/SIMD state of
the current task, the TIF_FOREIGN_FPSTATE flag is set too, so that the
user mode FP/SIMD state is reloaded from memory when returning to
userland.
However, the task may be scheduled out after completing the kernel mode
NEON section, but before returning to userland. When this happens, the
TIF_FOREIGN_FPSTATE flag will not be preserved, but will be set as usual
the next time the task is scheduled in, and will be based on the above
conditions.
This means that, rather than setting TIF_FOREIGN_FPSTATE when scheduling
in a task with TIF_KERNEL_FPSTATE set, the underlying state should be
updated so that TIF_FOREIGN_FPSTATE will assume the expected value as a
result.
So instead, call fpsimd_flush_cpu_state(), which takes care of this.
Closes: https://lore.kernel.org/all/cb8822182231850108fa43e0446a4c7f@kernel.org
Reported-by: Johannes Nixdorf <mixi@shadowice.org>
Fixes: aefbab8e77eb ("arm64: fpsimd: Preserve/restore kernel mode NEON at context switch")
Cc: Mark Brown <broonie@kernel.org>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Janne Grunau <j@jannau.net>
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Tested-by: Johannes Nixdorf <mixi@shadowice.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240522091335.335346-2-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This reverts commit b8995a18417088bb53f87c49d200ec72a9dd4ec1.
Ard managed to reproduce the dm-crypt corruption problem and got to the
bottom of it, so re-apply the problematic patch in preparation for
fixing things properly.
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Code in v6.9 arch/x86/kernel/smpboot.c was changed by commit
4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines") from:
static const struct x86_cpu_id intel_cod_cpu[] = {
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, 0), /* COD */
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, 0), /* COD */
X86_MATCH_INTEL_FAM6_MODEL(ANY, 1), /* SNC */ <--- 443
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
to:
static const struct x86_cpu_id intel_cod_cpu[] = {
X86_MATCH_VFM(INTEL_HASWELL_X, 0), /* COD */
X86_MATCH_VFM(INTEL_BROADWELL_X, 0), /* COD */
X86_MATCH_VFM(INTEL_ANY, 1), /* SNC */
{}
};
static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);
On an Intel CPU with SNC enabled this code previously matched the rule on line
443 to avoid printing messages about insane cache configuration. The new code
did not match any rules.
Expanding the macros for the intel_cod_cpu[] array shows that the old is
equivalent to:
static const struct x86_cpu_id intel_cod_cpu[] = {
[0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
[1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
[2] = { .vendor = 0, .family = 6, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
[3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
}
while the new code expands to:
static const struct x86_cpu_id intel_cod_cpu[] = {
[0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
[1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
[2] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
[3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
}
Looking at the code for x86_match_cpu():
const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match)
{
const struct x86_cpu_id *m;
struct cpuinfo_x86 *c = &boot_cpu_data;
for (m = match;
m->vendor | m->family | m->model | m->steppings | m->feature;
m++) {
...
}
return NULL;
it is clear that there was no match because the ANY entry in the table (array
index 2) is now the loop termination condition (all of vendor, family, model,
steppings, and feature are zero).
So this code was working before because the "ANY" check was looking for any
Intel CPU in family 6. But fails now because the family is a wild card. So the
root cause is that x86_match_cpu() has never been able to match on a rule with
just X86_VENDOR_INTEL and all other fields set to wildcards.
Add a new flags field to struct x86_cpu_id that has a bit set to indicate that
this entry in the array is valid. Update X86_MATCH*() macros to set that bit.
Change the end-marker check in x86_match_cpu() to just check the flags field
for this bit.
Backporter notes: The commit in Fixes is really the one that is broken:
you can't have m->vendor as part of the loop termination conditional in
x86_match_cpu() because it can happen - as it has happened above
- that that whole conditional is 0 albeit vendor == 0 is a valid case
- X86_VENDOR_INTEL is 0.
However, the only case where the above happens is the SNC check added by
4db64279bc2b1 so you only need this fix if you have backported that
other commit
4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines")
Fixes: 644e9cbbe3fc ("Add driver auto probing for x86 features v4")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable+noautosel@kernel.org> # see above
Link: https://lore.kernel.org/r/20240517144312.GBZkdtAOuJZCvxhFbJ@fat_crate.local
|
|
Commit 62c1bff593b7 added an extra HZ along with msecs_to_jiffies.
This patch fixes that.
Cc: stable@vger.kernel.org
Fixes: 62c1bff593b7 ("net: mana: Configure hwc timeout from hardware")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1716185104-31658-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20240520224620.9480-2-tony.luck@intel.com
|
|
We used '#ifdef MODULE' for judging whether the system supports the
sound module or not, and /proc/asound/modules is created only when
'#ifdef MODULE' is true. The check is not really appropriate, though,
because the flag means only for the sound core and the drivers are
still allowed to be built as modules even if 'MODULE' is not set in
sound/core/init.c.
For fixing the inconsistency, replace those ifdefs with 'ifdef
CONFIG_MODULES'. One place for a NULL module check is rewritten with
IS_MODULE(CONFIG_SND) to be more intuitive. It can't be changed to
CONFIG_MODULES; otherwise it would hit a WARN_ON() incorrectly.
This is a slight behavior change; the modules proc entry appears now
no matter whether the sound core is built-in or not as long as modules
are enabled on the kernel in general. This can't be avoided due to
the nature of kernel builds.
Link: https://lore.kernel.org/r/20240520170349.2417900-1-xu.yang_2@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240522070442.17786-2-tiwai@suse.de
|
|
The commit 81033c6b584b ("ALSA: core: Warn on empty module")
introduced a WARN_ON() for a NULL module pointer passed at snd_card
object creation, and it also wraps the code around it with '#ifdef
MODULE'. This works in most cases, but the devils are always in
details. "MODULE" is defined when the target code (i.e. the sound
core) is built as a module; but this doesn't mean that the caller is
also built-in or not. Namely, when only the sound core is built-in
(CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m),
the passed module pointer is ignored even if it's non-NULL, and
card->module remains as NULL. This would result in the missing module
reference up/down at the device open/close, leading to a race with the
code execution after the module removal.
For addressing the bug, move the assignment of card->module again out
of ifdef. The WARN_ON() is still wrapped with ifdef because the
module can be really NULL when all sound drivers are built-in.
Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would
lead to a false-positive NULL module check. Admittedly it won't catch
perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no
real problem as it's only for debugging, and the condition is pretty
rare.
Fixes: 81033c6b584b ("ALSA: core: Warn on empty module")
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Closes: https://lore.kernel.org/r/20240520170349.2417900-1-xu.yang_2@nxp.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240522070442.17786-1-tiwai@suse.de
|
|
Lan966x is adding ptp traps to redirect the ptp frames to the CPU such
that the HW will not forward these frames anywhere. The issue is that in
case ptp is not enabled and the timestamping source is et to
HWTSTAMP_SOURCE_NETDEV then these traps would not be removed on the
error path.
Fix this by removing the traps in this case as they are not needed.
Fixes: 54e1ed69c40a ("net: lan966x: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240517135808.3025435-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With the following two conditions, bio will be lost:
1) blk plug is not enabled, for example, __blkdev_direct_IO_simple() and
__blkdev_direct_IO_async();
2) bio plug is enabled, for example write IO for raid1/raid10 while
bitmap is enabled;
Root cause is that blk_finish_plug() will add the bio to
curent->bio_list, while such bio will not be handled:
__submit_bio_noacct
current->bio_list = bio_list_on_stack;
blk_start_plug
do {
dm_submit_bio
md_handle_request
raid10_write_request
-> generate new bio for underlying disks
raid1_add_bio_to_plug -> bio is added to plug
} while ((bio = bio_list_pop(&bio_list_on_stack[0])))
-> previous bio are all handled
blk_finish_plug
raid10_unplug
raid1_submit_write
submit_bio_noacct
if (current->bio_list)
bio_list_add(¤t->bio_list[0], bio)
-> add new bio
current->bio_list = NULL
-> new bio is lost
Fix the problem by moving the plug into the while loop, so that
current->bio_list will still be handled after blk_finish_plug().
By the way, enable plug for raid1/raid10 in this case will also prevent
delay IO handling into daemon thread, which should also improve IO
performance.
Fixes: 060406c61c7c ("block: add plug while submitting IO")
Reported-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/all/CAGVVp+Xsmzy2G9YuEatfMT6qv1M--YdOCQ0g7z7OVmcTbBxQAg@mail.gmail.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Link: https://lore.kernel.org/r/20240521200308.983986-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next-fixes for v6.10-rc1:
- VM_BIND fix for nouveau.
- Lots of panthor fixes:
* Fixes for panthor's heap logical block.
* Reset on unrecoverable fault
* Fix VM references.
* Reset fix.
- xlnx compile and doc fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/54d2c8b9-8b04-45fc-b483-200ffac9d344@linux.intel.com
|
|
The patch updates the function documentation comment for
rv_en(dis)able_monitor to adhere to the kernel-doc specification.
Link: https://lore.kernel.org/linux-trace-kernel/20240520054239.61784-1-yang.lee@linux.alibaba.com
Fixes: 102227b970a15 ("rv: Add Runtime Verification (RV) interface")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/trace/preemptirq_delay_test.o
Link: https://lore.kernel.org/linux-trace-kernel/20240518-md-preemptirq_delay_test-v1-1-387d11b30d85@quicinc.com
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f96e8577da10 ("lib: Add module for testing preemptoff/irqsoff latency tracers")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The reader code in rb_get_reader_page() swaps a new reader page into the
ring buffer by doing cmpxchg on old->list.prev->next to point it to the
new page. Following that, if the operation is successful,
old->list.next->prev gets updated too. This means the underlying
doubly-linked list is temporarily inconsistent, page->prev->next or
page->next->prev might not be equal back to page for some page in the
ring buffer.
The resize operation in ring_buffer_resize() can be invoked in parallel.
It calls rb_check_pages() which can detect the described inconsistency
and stop further tracing:
[ 190.271762] ------------[ cut here ]------------
[ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0
[ 190.271789] Modules linked in: [...]
[ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1
[ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f
[ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014
[ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0
[ 190.272023] Code: [...]
[ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206
[ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80
[ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700
[ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000
[ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720
[ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000
[ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000
[ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0
[ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 190.272077] Call Trace:
[ 190.272098] <TASK>
[ 190.272189] ring_buffer_resize+0x2ab/0x460
[ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0
[ 190.272206] tracing_resize_ring_buffer+0x65/0x90
[ 190.272216] tracing_entries_write+0x74/0xc0
[ 190.272225] vfs_write+0xf5/0x420
[ 190.272248] ksys_write+0x67/0xe0
[ 190.272256] do_syscall_64+0x82/0x170
[ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 190.272373] RIP: 0033:0x7f1bd657d263
[ 190.272381] Code: [...]
[ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263
[ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001
[ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000
[ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500
[ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002
[ 190.272412] </TASK>
[ 190.272414] ---[ end trace 0000000000000000 ]---
Note that ring_buffer_resize() calls rb_check_pages() only if the parent
trace_buffer has recording disabled. Recent commit d78ab792705c
("tracing: Stop current tracer when resizing buffer") causes that it is
now always the case which makes it more likely to experience this issue.
The window to hit this race is nonetheless very small. To help
reproducing it, one can add a delay loop in rb_get_reader_page():
ret = rb_head_page_replace(reader, cpu_buffer->reader_page);
if (!ret)
goto spin;
for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */
__asm__ __volatile__ ("" : : : "memory");
rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list;
.. and then run the following commands on the target system:
echo 1 > /sys/kernel/tracing/events/sched/sched_switch/enable
while true; do
echo 16 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1
echo 8 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1
done &
while true; do
for i in /sys/kernel/tracing/per_cpu/*; do
timeout 0.1 cat $i/trace_pipe; sleep 0.2
done
done
To fix the problem, make sure ring_buffer_resize() doesn't invoke
rb_check_pages() concurrently with a reader operating on the same
ring_buffer_per_cpu by taking its cpu_buffer->reader_lock.
Link: https://lore.kernel.org/linux-trace-kernel/20240517134008.24529-3-petr.pavlu@suse.com
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 659f451ff213 ("ring-buffer: Add integrity check at end of iter read")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
[ Fixed whitespace ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Adjust the following code documentation:
* Kernel-doc comments for ring_buffer_read_prepare() and
ring_buffer_read_finish() mention that recording to the ring buffer is
disabled when the read is active. Remove mention of this restriction
because it was already lifted in commit 1039221cc278 ("ring-buffer: Do
not disable recording when there is an iterator").
* Function ring_buffer_read_finish() performs a self-check of the
ring-buffer by locking cpu_buffer->reader_lock and then calling
rb_check_pages(). The preceding comment explains that the lock is
needed because rb_check_pages() clears the HEAD flag required by
readers which might be running in parallel. Remove this explanation
because commit 8843e06f67b1 ("ring-buffer: Handle race between
rb_move_tail and rb_check_pages") simplified the function so it no
longer resets the mentioned flag. Nonetheless, the lock is still
needed because a reader swapping a page into the ring buffer can make
the underlying doubly-linked list temporarily inconsistent.
This is a non-functional change.
Link: https://lore.kernel.org/linux-trace-kernel/20240517134008.24529-2-petr.pavlu@suse.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"General:
- Integrate the shellcheck utility with the build of perf to allow
catching shell problems early in areas such as 'perf test', 'perf
trace' scrape scripts, etc
- Add 'uretprobe' variant in the 'perf bench uprobe' tool
- Add script to run instances of 'perf script' in parallel
- Allow parsing tracepoint names that start with digits, such as
9p/9p_client_req, etc. Make sure 'perf test' tests it even on
systems where those tracepoints aren't available
- Add Kan Liang to MAINTAINERS as a perf tools reviewer
- Add support for using the 'capstone' disassembler library in
various tools, such as 'perf script' and 'perf annotate'. This is
an alternative for the use of the 'xed' and 'objdump' disassemblers
Data-type profiling improvements:
- Resolve types for a->b->c by backtracking the assignments until it
finds DWARF info for one of those members
- Support for global variables, keeping a cache to speed up lookups
- Handle the 'call' instruction, dealing with effects on registers
and handling its return when tracking register data types
- Handle x86's segment based addressing like %gs:0x28, to support
things like per CPU variables, the stack canary, etc
- Data-type profiling got big speedups when using capstone for
disassembling. The objdump outoput parsing method is left as a
fallback when capstone fails or isn't available. There are patches
posted for 6.11 that to use a LLVM disassembler
- Support event group display in the TUI when annotating types with
--data-type, for instance to show memory load and store events for
the data type fields
- Optimize the 'perf annotate' data structures, reducing memory usage
- Add a initial 'perf test' for 'perf annotate', checking that a
target symbol appears on the output, specifying objdump via the
command line, etc
Vendor Events:
- Update Intel JSON files for Cascade Lake X, Emerald Rapids, Grand
Ridge, Ice Lake X, Lunar Lake, Meteor Lake, Sapphire Rapids, Sierra
Forest, Sky Lake X, Sky Lake and Snow Ridge X. Remove info metrics
erroneously in TopdownL1
- Add AMD's Zen 5 core and uncore events and metrics. Those come from
the "Performance Monitor Counters for AMD Family 1Ah Model 00h- 0Fh
Processors" document, with events that capture information on op
dispatch, execution and retirement, branch prediction, L1 and L2
cache activity, TLB activity, etc
- Mark L1D_CACHE_INVAL impacted by errata for ARM64's AmpereOne/
AmpereOneX
Miscellaneous:
- Sync header copies with the kernel sources
- Move some header copies used only for generating translation string
tables for ioctl cmds and other syscall integer arguments to a new
directory under tools/perf/beauty/, to separate from copies in
tools/include/ that are used to build the tools
- Introduce scrape script for several syscall 'flags'/'mask'
arguments
- Improve cpumap utilization, fixing up pairing of refcounts, using
the right iterators (perf_cpu_map__for_each_cpu), etc
- Give more details about raw event encodings in 'perf list', show
tracepoint encoding in the detailed output
- Refactor the DSOs handling code, reducing memory usage
- Document the BPF event modifier and add a 'perf test' for it
- Improve the event parser, better error messages and add further
'perf test's for it
- Add reference count checking to 'struct comm_str' and 'struct
mem_info'
- Make ARM64's 'perf test' entries for the Neoverse N1 more robust
- Tweak the ARM64's Coresight 'perf test's
- Improve ARM64's CoreSight ETM version detection and error reporting
- Fix handling of symbols when using kcore
- Fix PAI (Processor Activity Instrumentation) counter names for s390
virtual machines in 'perf report'
- Fix -g/--call-graph option failure in 'perf sched timehist'
- Add LIBTRACEEVENT_DIR build option to allow building with
libtraceevent installed in non-standard directories, such as when
doing cross builds
- Various 'perf test' and 'perf bench' fixes
- Improve 'perf probe' error message for long C++ probe names"
* tag 'perf-tools-for-v6.10-1-2024-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (260 commits)
tools lib subcmd: Show parent options in help
perf pmu: Count sys and cpuid JSON events separately
perf stat: Don't display metric header for non-leader uncore events
perf annotate-data: Ensure the number of type histograms
perf annotate: Fix segfault on sample histogram
perf daemon: Fix file leak in daemon_session__control
libsubcmd: Fix parse-options memory leak
perf lock: Avoid memory leaks from strdup()
perf sched: Rename 'switches' column header to 'count' and add usage description, options for latency
perf tools: Ignore deleted cgroups
perf parse: Allow tracepoint names to start with digits
perf parse-events: Add new 'fake_tp' parameter for tests
perf parse-events: pass parse_state to add_tracepoint
perf symbols: Fix ownership of string in dso__load_vmlinux()
perf symbols: Update kcore map before merging in remaining symbols
perf maps: Re-use __maps__free_maps_by_name()
perf symbols: Remove map from list before updating addresses
perf tracepoint: Don't scan all tracepoints to test if one exists
perf dwarf-aux: Fix build with HAVE_DWARF_CFI_SUPPORT
perf thread: Fixes to thread__new() related to initializing comm
...
|
|
Pull bitmap updates from Yury Norov:
- topology_span_sane() optimization from Kyle Meyer
- fns() rework from Kuan-Wei Chiu (used in cpumask_local_spread() and
other places)
- headers cleanup from Andy
- add a MAINTAINERS record for bitops API
* tag 'bitmap-for-6.10v2' of https://github.com/norov/linux:
usercopy: Don't use "proxy" headers
bitops: Move aligned_byte_mask() to wordpart.h
MAINTAINERS: add BITOPS API record
bitmap: relax find_nth_bit() limitation on return value
lib: make test_bitops compilable into the kernel image
bitops: Optimize fns() for improved performance
lib/test_bitops: Add benchmark test for fns()
Compiler Attributes: Add __always_used macro
sched/topology: Optimize topology_span_sane()
cpumask: Add for_each_cpu_from()
|
|
[Why]
Commit:
- commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
accidently overwrite the commit
- commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2")
which cause regression.
[How]
Recover the original NULL fix and remove the unnecessary input parameter 'state' for
drm_dp_add_payload_part2().
Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
Reported-by: Leon Weiß <leon.weiss@ruhr-uni-bochum.de>
Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/
Cc: lyude@redhat.com
Cc: imre.deak@intel.com
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307062957.2323620-1-Wayne.Lin@amd.com
(cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305)
|
|
Pull misc vfs updates from Al Viro:
"Assorted commits that had missed the last merge window..."
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove call_{read,write}_iter() functions
do_dentry_open(): kill inode argument
kernel_file_open(): get rid of inode argument
get_file_rcu(): no need to check for NULL separately
fd_is_open(): move to fs/file.c
close_on_exec(): pass files_struct instead of fdtable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bdev flags update from Al Viro:
"Compactifying bdev flags.
We can easily have up to 24 flags with sane atomicity, _without_
pushing anything out of the first cacheline of struct block_device"
* tag 'pull-bd_flags-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
bdev: move ->bd_make_it_fail to ->__bd_flags
bdev: move ->bd_ro_warned to ->__bd_flags
bdev: move ->bd_has_subit_bio to ->__bd_flags
bdev: move ->bd_write_holder into ->__bd_flags
bdev: move ->bd_read_only to ->__bd_flags
bdev: infrastructure for flags
wrapper for access to ->bd_partno
Use bdev_is_paritition() instead of open-coding it
|
|
With the move to private task_work, SQPOLL neglected to also run the
normal task_work, if any is pending. This will eventually get run, but
we should run it with the private task_work to ensure that things like
a final fput() is processed in a timely fashion.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/313824bc-799d-414f-96b7-e6de57c7e21d@gmail.com/
Reported-by: Andrew Udvare <audvare@gmail.com>
Fixes: af5d68f8892f ("io_uring/sqpoll: manage task_work privately")
Tested-by: Christian Heusel <christian@heusel.eu>
Tested-by: Andrew Udvare <audvare@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Switch read and write software bits for PUDs
- Add missing hardware bits for PUDs and PMDs
- Generate unwind information for C modules to fix GDB unwind error for
vDSO functions
- Create .build-id links for unstripped vDSO files to enable vDSO
debugging with symbols
- Use standard stack frame layout for vDSO generated stack frames to
manually walk stack frames without DWARF information
- Rework perf_callchain_user() and arch_stack_walk_user() functions to
reduce code duplication
- Skip first stack frame when walking user stack
- Add basic checks to identify invalid instruction pointers when
walking stack frames
- Introduce and use struct stack_frame_vdso_wrapper within vDSO user
wrapper code to automatically generate an asm-offset define. Also use
STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document
that the code works with user space stack
- Clear the backchain of the extra stack frame added by the vDSO user
wrapper code. This allows the user stack walker to detect and skip
the non-standard stack frame. Without this an incorrect instruction
pointer would be added to stack traces.
- Rewrite psw_idle() function in C to ease maintenance and further
enhancements
- Remove get_vtimer() function and use get_cpu_timer() instead
- Mark psw variable in __load_psw_mask() as __unitialized to avoid
superfluous clearing of PSW
- Remove obsolete and superfluous comment about removed TIF_FPU flag
- Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
warnings reported by Coccinelle
- Wipe sensitive data and all copies of protected- or secure-keys from
stack when an IOCTL fails
- Both do_airq_interrupt() and do_io_interrupt() functions set
CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code
- Provide iucv_alloc_device() and iucv_release_device() helpers, which
can be used to deduplicate more or less identical IUCV device
allocation and release code in four different drivers
- Make use of iucv_alloc_device() and iucv_release_device() helpers to
get rid of quite some code and also remove a cast to an incompatible
function (clang W=1)
- There is no user of iucv_root outside of the core IUCV code left.
Therefore remove the EXPORT_SYMBOL
- __apply_alternatives() contains a runtime check which verifies that
the size of the to be patched code area is even. Convert this to a
compile time check
- Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands
from 128 to 240
- Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally
allowed
- Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of
IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL
block on 'scp_data' sysfs attribute update
- Initialize the correct fields of the NVMe dump block, which were
confused with FCP fields
- Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce
code duplication
- Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such
as dumpconf passing additional kernel command line parameters to a
stand-alone dumper
- Rework the CPACF query functions to use the correct RRE or RRF
instruction formats and set instruction register fields correctly
- Instead of calling BUG() at runtime force a link error during compile
when a unsupported opcode is used with __cpacf_query() or
__cpacf_check_opcode() functions
- Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask
or /sys/bus/ap/aqmask sysfs file update with a relative mask value
- Fix "bindings complete" udev event which should be sent once all AP
devices have been bound to device drivers and again when unbind/bind
actions take place and all AP devices are bound again
- Facility list alt_stfle_fac_list is nowhere used in the decompressor,
therefore remove it there
- Remove custom kprobes insn slot allocator in favour of the standard
module_alloc() one, since kernel image and module areas are located
within 4GB
- Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid
calling memset() with a large byte count and get rid of the sparse
warning as result
* tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
s390/zcrypt: Use kvcalloc() instead of kvmalloc_array()
s390/kprobes: Remove custom insn slot allocator
s390/boot: Remove alt_stfle_fac_list from decompressor
s390/ap: Fix bind complete udev event sent after each AP bus scan
s390/ap: Fix crash in AP internal function modify_bitmap()
s390/cpacf: Make use of invalid opcode produce a link error
s390/cpacf: Split and rework cpacf query functions
s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl
s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data'
s390/ipl: Fix incorrect initialization of nvme dump block
s390/ipl: Fix incorrect initialization of len fields in nvme reipl block
s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length
s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds
s390/alternatives: Convert runtime sanity check into compile time check
s390/iucv: Unexport iucv_root
tty: hvc-iucv: Make use of iucv_alloc_device()
s390/smsgiucv_app: Make use of iucv_alloc_device()
s390/netiucv: Make use of iucv_alloc_device()
s390/vmlogrdr: Make use of iucv_alloc_device()
s390/iucv: Provide iucv_alloc_device() / iucv_release_device()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
. remove use of kernel config option from uapi header
* tag 'm68knommu-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: Avoid CONFIG_COLDFIRE switch in uapi header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
- Followup fix for the EFI boot sequence refactor, which may result in
physical KASLR putting the kernel in a region which is being used for
a special purpose via a command line argument.
* tag 'efi-fixes-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Omit physical KASLR when memory reservations exist
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM discard regressions due to DM core switching over to using
queue_limits_set() without DM core and targets first being updated to
set (and stack) discard limits in terms of max_hw_discard_sectors and
not max_discard_sectors
- Fix stable@ DM integrity discard support to set device's
discard_granularity limit to the device's logical block size
* tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: always manage discard support in terms of max_hw_discard_sectors
dm-integrity: set discard_granularity to logical block size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the amd-pstate driver and the operating performance point
(OPP) handling related to generic PM domains.
Specifics:
- Fix a memory leak in the exit path of amd-pstate (Peng Ma)
- Fix required_opp_tables handling in the cases when multiple generic
PM domains share one OPP table (Viresh Kumar)"
* tag 'pm-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
OPP: Fix required_opp_tables for multiple genpds using same table
cpufreq: amd-pstate: fix memory leak on CPU EPP exit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These make the ACPI EC driver always install the EC address space
handler at the root of the ACPI namespace which causes it to take care
of all EC operation regions everywhere.
This means that the custom EC address space handler in the WMI driver
is not needed any more and accordingly it gets removed altogether"
* tag 'acpi-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86: wmi: Remove custom EC address space handler
ACPI: EC: Install address space handler at the namespace root
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the MediaTek lvts_thermal driver and the handling of trip
points that start as invalid and are adjusted later by user space via
sysfs.
Specifics:
- Fix and clean up the MediaTek lvts_thermal driver (Julien Panis)
- Prevent invalid trip point handling from triggering spurious trip
point crossing events and allow passive polling to stop when a
passive trip point involved in it becomes invalid (Rafael Wysocki)"
* tag 'thermal-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix the handling of invalid trip points
thermal/drivers/mediatek/lvts_thermal: Fix wrong lvts_ctrl index
thermal/drivers/mediatek/lvts_thermal: Remove unused members from struct lvts_ctrl_data
thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel
Pull intel-gpio fixes from Andy Shevchenko:
- NULL pointer dereference fix in GPIO APCI library
- Restore ACPI handle matching for GPIO devices represented in banks
* tag 'intel-gpio-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel:
gpiolib: acpi: Fix failed in acpi_gpiochip_find() by adding parent node match
gpiolib: acpi: Move ACPI device NULL check to acpi_can_fallback_to_crs()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
soundwire: intel_ace2.x: add support for DOAISE property
soundwire: intel_ace2.x: add support for DODSE property
soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
soundwire: intel_ace2x: cleanup DOAIS/DODS settings
soundwire: intel_ace2x: simplify check_wake()
soundwire: intel_ace2x: fix wakeup handling
soundwire: intel_init: resume all devices on exit.
soundwire: intel: export intel_resume_child_device
soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
ASoC: SOF: Intel: hda: disable SoundWire interrupt later
soundwire: qcom: allow multi-link on newer devices
soundwire: intel_ace2x: use legacy formula for intel_alh_id
soundwire: reconcile dp0_prop and dpn_prop
soundwire: intel_ace2x: set the clock source
soundwire: intel_ace2.x: power-up first before setting SYNCPRD
soundwire: intel_ace2x: move and extend clock selection
soundwire: intel: add support for MeteorLake additional clocks
soundwire: intel: add more values for SYNCPRD
soundwire: bus: extend base clock checks to 96 MHz
soundwire: cadence: show the bus frequency and frame shape
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull generic phy updates from Vinod Koul:
"New HW Support:
- Support for Embedded DisplayPort and DisplayPort submodes and
driver support on Qualcomm X1E80100 edp driver
- Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000
and eusb2-repeater for SMB2360
- Samsung HDMI PHY for i.MX8MP, gs101 UFS phy
- Mediatek XFI T-PHY support for mt7988
- Rockchip usbdp combo phy driver
Updates:
- Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for
X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage
swing tables
- Freescale imx8m-pci pcie link-up updates
- Rockchip rx-common-refclk-mode support
- More platform remove callback returning void conversions"
* tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema
phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p
phy: samsung-ufs: ufs: exit on first reported error
phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header
phy: rockchip: fix CONFIG_TYPEC dependency
phy: rockchip: usbdp: fix uninitialized variable
phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode
dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode
phy: rockchip: add usbdp combo phy driver
dt-bindings: phy: add rockchip usbdp combo phy document
phy: add driver for MediaTek XFI T-PHY
dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings
phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void
phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5
MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New HW support:
- Freescale i.MX8ULP edma support in edma driver
- StarFive JH8100 DMA support in Synopsis axi-dmac driver
Updates:
- Tracing support for freescale edma driver, updates to dpaa2 driver
- Remove unused QCom hidma DT support
- Support for i2c dma in imx-sdma
- Maintainers update for idxd and edma drivers"
* tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
MAINTAINERS: Update role for IDXD driver
dmaengine: fsl-edma: use _Generic to handle difference type
dmaengine: fsl-edma: add trace event support
dmaengine: idxd: Avoid unnecessary destruction of file_ida
dmaengine: xilinx: xdma: fix module autoloading
dt-bindings: dma: fsl-edma: allow 'power-domains' property
dt-bindings: dma: fsl-edma: remove 'clocks' from required
dmaengine: fsl-dpaa2-qdma: Fix kernel-doc check warning
dmaengine: imx-sdma: Add i2c dma support
dmaengine: imx-sdma: utilize compiler to calculate ADDRS_ARRAY_SIZE_V<n>
dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID
dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dt-bindings: dma: Drop unused QCom hidma binding
dmaengine: qcom: Drop hidma DT support
dmaengine: pl08x: Use kcalloc() instead of kzalloc()
dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3
dmaengine: fsl-edma: fix miss mutex unlock at an error return path
dmaengine: pch_dma: remove unused function chan2parent
dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open
...
|
|
When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes
to bug_table entries, and as a result the last entry in a bug table will
be ignored, potentially leading to an unexpected panic(). All prior
entries in the table will be handled correctly.
The arm64 ABI requires that struct fields of up to 8 bytes are
naturally-aligned, with padding added within a struct such that struct
are suitably aligned within arrays.
When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
signed int file_disp; // 4 bytes
unsigned short line; // 2 bytes
unsigned short flags; // 2 bytes
}
... with 12 bytes total, requiring 4-byte alignment.
When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is:
struct bug_entry {
signed int bug_addr_disp; // 4 bytes
unsigned short flags; // 2 bytes
< implicit padding > // 2 bytes
}
... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing
padding, requiring 4-byte alginment.
When we create a bug_entry in assembly, we align the start of the entry
to 4 bytes, which implicitly handles padding for any prior entries.
However, we do not align the end of the entry, and so when
CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding
bytes.
For the main kernel image this is not a problem as find_bug() doesn't
depend on the trailing padding bytes when searching for entries:
for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
if (bugaddr == bug_addr(bug))
return bug;
However for modules, module_bug_finalize() depends on the trailing
bytes when calculating the number of entries:
mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
... and as the last bug_entry lacks the necessary padding bytes, this entry
will not be counted, e.g. in the case of a single entry:
sechdrs[i].sh_size == 6
sizeof(struct bug_entry) == 8;
sechdrs[i].sh_size / sizeof(struct bug_entry) == 0;
Consequently module_find_bug() will miss the last bug_entry when it does:
for (i = 0; i < mod->num_bugs; ++i, ++bug)
if (bugaddr == bug_addr(bug))
goto out;
... which can lead to a kenrel panic due to an unhandled bug.
This can be demonstrated with the following module:
static int __init buginit(void)
{
WARN(1, "hello\n");
return 0;
}
static void __exit bugexit(void)
{
}
module_init(buginit);
module_exit(bugexit);
MODULE_LICENSE("GPL");
... which will trigger a kernel panic when loaded:
------------[ cut here ]------------
hello
Unexpected kernel BRK exception at EL1
Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in: hello(O+)
CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : buginit+0x18/0x1000 [hello]
lr : buginit+0x18/0x1000 [hello]
sp : ffff800080533ae0
x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000
x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58
x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0
x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006
x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720
x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312
x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8
x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000
x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0
Call trace:
buginit+0x18/0x1000 [hello]
do_one_initcall+0x80/0x1c8
do_init_module+0x60/0x218
load_module+0x1ba4/0x1d70
__do_sys_init_module+0x198/0x1d0
__arm64_sys_init_module+0x1c/0x28
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xd8
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
Code: d0ffffe0 910003fd 91000000 9400000b (d4210000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: BRK handler: Fatal exception
Fix this by always aligning the end of a bug_entry to 4 bytes, which is
correct regardless of CONFIG_DEBUG_BUGVERBOSE.
Fixes: 9fb7410f955f ("arm64/BUG: Use BRK instruction for generic BUG traps")
Signed-off-by: Yuanbin Xie <xieyuanbin1@huawei.com>
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1716212077-43826-1-git-send-email-xiaojiangfeng@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- redo the omap driver from legacy to mailbox api
- enable bufferless IPI for zynqmp
- add mhu-v3 driver
- convert from tasklet to BH workqueue
- add qcom MSM8974 APCS compatible IDs
* tag 'mailbox-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (24 commits)
dt-bindings: mailbox: qcom-ipcc: Document the SDX75 IPCC
dt-bindings: mailbox: qcom: Add MSM8974 APCS compatible
mailbox: Convert from tasklet to BH workqueue
mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown
mailbox: mtk-cmdq-mailbox: fix module autoloading
mailbox: zynqmp: handle SGI for shared IPI
mailbox: arm_mhuv3: Add driver
dt-bindings: mailbox: arm,mhuv3: Add bindings
mailbox: omap: Remove kernel FIFO message queuing
mailbox: omap: Reverse FIFO busy check logic
mailbox: omap: Remove mbox_chan_to_omap_mbox()
mailbox: omap: Use mbox_controller channel list directly
mailbox: omap: Use function local struct mbox_controller
mailbox: omap: Merge mailbox child node setup loops
mailbox: omap: Use devm_pm_runtime_enable() helper
mailbox: omap: Remove device class
mailbox: omap: Remove unneeded header omap-mailbox.h
mailbox: omap: Move fifo size check to point of use
mailbox: omap: Move omap_mbox_irq_t into driver
mailbox: omap: Remove unused omap_mbox_request_channel() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This makes the remoteproc core rproc_class const.
DeviceTree bindings for a few different Qualcomm remoteprocs are
updated to remove a range of validation warnings/errors. The Qualcomm
SMD binding marks qcom,ipc deprecated, in favor or the mailbox
interface.
The TI K3 R5 remoteproc driver is updated to ensure that cores are
powered up in the appropriate order. The driver also see a couple of
fixes related to cleanups in error paths during probe.
The Mediatek remoteproc driver is extended to support the MT8188 SCP
core 1. Support for varying DRAM and IPI shared buffer sizes are
introduced. This together with a couple of bug fixes and improvements
to the driver.
Support for the AMD-Xilinx Versal and Versal-NET platforms are added.
Coredump support and support for parsing TCM information from
DeviceTree is added to the Xilinx R5F remoteproc driver"
* tag 'rproc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
dt-bindings: remoteproc: qcom,sdm845-adsp-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated
remoteproc: k3-r5: Jump to error handling labels in start/stop errors
remoteproc: mediatek: Fix error code in scp_rproc_init()
remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs
remoteproc: k3-r5: Wait for core0 power-up before powering up core1
remoteproc: mediatek: Add IMGSYS IPI command
remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes
remoteproc: mediatek: Support MT8188 SCP core 1
dt-bindings: remoteproc: mediatek: Support MT8188 dual-core SCP
drivers: remoteproc: xlnx: Fix uninitialized tcm mode
drivers: remoteproc: xlnx: Fix uninitialized variable use
drivers: remoteproc: xlnx: Add Versal and Versal-NET support
remoteproc: zynqmp: parse TCM from device tree
dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings
remoteproc: zynqmp: fix lockstep mode memory region
remoteproc: zynqmp: Add coredump support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This makes core rpmsg_class const and ensures that the automatic
module loading of the Qualcomm glink_ssr driver happens"
* tag 'rpmsg-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: qcom_glink_ssr: fix module autoloading
rpmsg: core: Make rpmsg_class constant
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull trusted keys fixes from Jarkko Sakkinen:
"These are two bugs I found from trusted keys while working on a new
RSA key type for TPM2. Both originate form v5.13.
The memory leak is more crucial but I don't think it is either good
idea if kernel throws WARN when ASN.1 parser fails, even if it is
related to programming error, as it is not that mature code yet.
There's at least two WARN's in that code but I picked just the one
more likely to trigger. Planning to fix the other one too over time"
* tag 'keys-trusted-next-6.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Do not use WARN when encode fails
KEYS: trusted: Fix memory leak in tpm2_key_encode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bdev bd_inode updates from Al Viro:
"Replacement of bdev->bd_inode with sane(r) set of primitives by me and
Yu Kuai"
* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RIP ->bd_inode
dasd_format(): killing the last remaining user of ->bd_inode
nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
block/bdev.c: use the knowledge of inode/bdev coallocation
gfs2: more obvious initializations of mapping->host
fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
grow_dev_folio(): we only want ->bd_inode->i_mapping there
use ->bd_mapping instead of ->bd_inode->i_mapping
block_device: add a pointer to struct address_space (page cache of bdev)
missing helpers: bdev_unhash(), bdev_drop()
block: move two helpers into bdev.c
block2mtd: prevent direct access of bd_inode
dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
blkdev_write_iter(): saner way to get inode and bdev
bcachefs: remove dead function bdev_sectors()
ext4: remove block_device_ejected()
erofs_buf: store address_space instead of inode
erofs: switch erofs_bread() to passing offset instead of block number
|
|
to 2.49
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
With the changes to folios/netfs it is now easier to reenable
swapfile support over SMB3 which fixes various xfstests
Reviewed-by: David Howells <dhowells@redhat.com>
Suggested-by: David Howells <dhowells@redhat.com>
Fixes: e1209d3a7a67 ("mm: introduce ->swap_rw and use it for reads from SWP_FS_OPS swap-space")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Previous patch modified the standard used by acpi_gpiochip_find()
to match device nodes. Using the device node set in gc->gpiodev->d-
ev instead of gc->parent.
However, there is a situation in gpio-dwapb where the GPIO device
driver will set gc->fwnode for each port corresponding to a child
node under a GPIO device, so gc->gpiodev->dev will be assigned the
value of each child node in gpiochip_add_data().
gpio-dwapb.c:
128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
struct dwapb_port_property *pp,
unsigned int offs);
port->gc.fwnode = pp->fwnode;
693,39 static int dwapb_gpio_probe;
err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);
When other drivers request GPIO pin resources through the GPIO device
node provided by ACPI (corresponding to the parent node), the change
of the matching object to gc->gpiodev->dev in acpi_gpiochip_find()
only allows finding the value of each port (child node), resulting
in a failed request.
Reapply the condition of using gc->parent for match in acpi_gpio-
chip_find() in the code can compatible with the problem of gpio-dwapb,
and will not affect the two cases mentioned in the patch:
1. There is no setting for gc->fwnode.
2. The case that depends on using gc->fwnode for match.
Fixes: 5062e4c14b75 ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()")
Fixes: 067dbc1ea5ce ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs blocksize updates from Al Viro:
"This gets rid of bogus set_blocksize() uses, switches it over
to be based on a 'struct file *' and verifies that the caller
has the device opened exclusively"
* tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make set_blocksize() fail unless block device is opened exclusive
set_blocksize(): switch to passing struct file *
btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens
swsusp: don't bother with setting block size
zram: don't bother with reopening - just use O_EXCL for open
swapon(2): open swap with O_EXCL
swapon(2)/swapoff(2): don't bother with block size
pktcdvd: sort set_blocksize() calls out
bcache_register(): don't bother with set_blocksize()
|
|
Following the relocation of the function call outside of
__acpi_find_gpio(), move the ACPI device NULL check to
acpi_can_fallback_to_crs().
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://lore.kernel.org/all/20240426154208.81894-1-laura.nao@collabora.com/
Fixes: 49c02f6e901c ("gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
pidfs started using much saner inodes in commit b28ddcc32d8f ("pidfs:
convert to path_from_stashed() helper"), but that exposed the fact that
lsof had some knowledge of just how odd our old anon_inode usage was.
For example, legacy anon_inodes hadn't even initialized the inode type
in the inode mode, so everything had a type of zero.
So sane tools like 'stat' would report these files as "weird file", but
'lsof' instead used that (together with the name of the link in proc) to
notice that it's an anonymous inode, and used it to detect pidfd files.
Let's keep our internal new sane inode model, but mask the file type
bits at 'stat()' time in the getattr() function we already have, and by
making the dentry name match what lsof expects too.
This keeps our internal models sane, but should make user space see the
same old odd behavior.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/a15b1050-4b52-4740-a122-a4d055c17f11@kernel.org/
Link: https://github.com/lsof-org/lsof/issues/317
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Seth Forshee <sforshee@kernel.org>
Cc: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Open vSwitch is originally intended to switch at layer 2, only dealing with
Ethernet frames. With the introduction of l3 tunnels support, it crossed
into the realm of needing to care a bit about some routing details when
making forwarding decisions. If an oversized packet would need to be
fragmented during this forwarding decision, there is a chance for pmtu
to get involved and generate a routing exception. This is gated by the
skbuff->pkt_type field.
When a flow is already loaded into the openvswitch module this field is
set up and transitioned properly as a packet moves from one port to
another. In the case that a packet execute is invoked after a flow is
newly installed this field is not properly initialized. This causes the
pmtud mechanism to omit sending the required exception messages across
the tunnel boundary and a second attempt needs to be made to make sure
that the routing exception is properly setup. To fix this, we set the
outgoing packet's pkt_type to PACKET_OUTGOING, since it can only get
to the openvswitch module via a port device or packet command.
Even for bridge ports as users, the pkt_type needs to be reset when
doing the transmit as the packet is truly outgoing and routing needs
to get involved post packet transformations, in the case of
VXLAN/GENEVE/udp-tunnel packets. In general, the pkt_type on output
gets ignored, since we go straight to the driver, but in the case of
tunnel ports they go through IP routing layer.
This issue is periodically encountered in complex setups, such as large
openshift deployments, where multiple sets of tunnel traversal occurs.
A way to recreate this is with the ovn-heater project that can setup
a networking environment which mimics such large deployments. We need
larger environments for this because we need to ensure that flow
misses occur. In these environment, without this patch, we can see:
./ovn_cluster.sh start
podman exec ovn-chassis-1 ip r a 170.168.0.5/32 dev eth1 mtu 1200
podman exec ovn-chassis-1 ip netns exec sw01p1 ip r flush cache
podman exec ovn-chassis-1 ip netns exec sw01p1 \
ping 21.0.0.3 -M do -s 1300 -c2
PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data.
From 21.0.0.3 icmp_seq=2 Frag needed and DF set (mtu = 1142)
--- 21.0.0.3 ping statistics ---
...
Using tcpdump, we can also see the expected ICMP FRAG_NEEDED message is not
sent into the server.
With this patch, setting the pkt_type, we see the following:
podman exec ovn-chassis-1 ip netns exec sw01p1 \
ping 21.0.0.3 -M do -s 1300 -c2
PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data.
From 21.0.0.3 icmp_seq=1 Frag needed and DF set (mtu = 1222)
ping: local error: message too long, mtu=1222
--- 21.0.0.3 ping statistics ---
...
In this case, the first ping request receives the FRAG_NEEDED message and
a local routing exception is created.
Tested-by: Jaime Caamano <jcaamano@redhat.com>
Reported-at: https://issues.redhat.com/browse/FDP-164
Fixes: 58264848a5a7 ("openvswitch: Add vxlan tunneling support.")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20240516200941.16152-1-aconole@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Although 'norecovery' mount option was marked as deprecated for a long
time and a warning message was printed during the deprecation window,
it's still actively utilized by several projects that need a safer way
to mount a btrfs without any writes.
Furthermore this 'norecovery' mount option is supported by other major
filesystems, which makes it less clear what's our motivation to remove
it.
Re-introduce the 'norecovery' mount option, and output a message to recommend
'rescue=nologreplay' option.
Link: https://lore.kernel.org/linux-btrfs/ZkxZT0J-z0GYvfy8@gardel-login/#t
Link: https://github.com/systemd/systemd/pull/32892
Link: https://bugzilla.suse.com/show_bug.cgi?id=1222429
Reported-by: Lennart Poettering <lennart@poettering.net>
Reported-by: Jiri Slaby <jslaby@suse.com>
Fixes: a1912f712188 ("btrfs: remove code for inode_cache and recovery mount options")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
JP-IK LEAP W502 laptop's headset mic is not enabled until
ALC897_FIXUP_HEADSET_MIC_PIN3 quirk is applied.
Here is the original pin node values:
0x11 0x40000000
0x12 0xb7a60130
0x14 0x90170110
0x15 0x411111f0
0x16 0x411111f0
0x17 0x411111f0
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x03211020
0x1c 0x411111f0
0x1d 0x4026892d
0x1e 0x411111f0
0x1f 0x411111f0
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Link: https://lore.kernel.org/r/20240520055008.7083-2-jhp@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ACPI specification clearly states how the processors should be
enumerated in the MADT:
"To ensure that the boot processor is supported post initialization,
two guidelines should be followed. The first is that OSPM should
initialize processors in the order that they appear in the MADT. The
second is that platform firmware should list the boot processor as the
first processor entry in the MADT.
...
Failure of OSPM implementations and platform firmware to abide by
these guidelines can result in both unpredictable and non optimal
platform operation."
The kernel relies on that ordering to detect the real BSP on crash kernels
which is important to avoid sending a INIT IPI to it as that would cause a
full machine reset.
On a Dell XPS 16 9640 the BIOS ignores this rule and enumerates the CPUs in
the wrong order. As a consequence the kernel falsely detects a crash kernel
and disables the corresponding CPU.
Prevent this by checking the IA32_APICBASE MSR for the BSP bit on the boot
CPU. If that bit is set, then the MADT based BSP detection can be safely
ignored. If the kernel detects a mismatch between the BSP bit and the first
enumerated MADT entry then emit a firmware bug message.
This obviously also has to be taken into account when the boot APIC ID and
the first enumerated APIC ID match. If the boot CPU does not have the BSP
bit set in the APICBASE MSR then there is no way for the boot CPU to
determine which of the CPUs is the real BSP. Sending an INIT to the real
BSP would reset the machine so the only sane way to deal with that is to
limit the number of CPUs to one and emit a corresponding warning message.
Fixes: 5c5682b9f87a ("x86/cpu: Detect real BSP on crash kernels")
Reported-by: Carsten Tolkmit <ctolkmit@ennit.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Carsten Tolkmit <ctolkmit@ennit.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87le48jycb.ffs@tglx
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218837
|
|
Shifting *signed int* typed constant 1 left by 31 bits causes undefined
behavior. Specify the correct *unsigned long* type by using 1UL instead.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
All callers of pnfs_generic_pg_check_layout() also want to do a call to
check that the layout's range covers the IO range. Merge the functionality
of the pnfs_generic_pg_check_range() into that of
pnfs_generic_pg_check_layout().
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Before doing the IO, check that we have the layout covering the range of
IO.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Change left over allocation flags.
Fixes: a245832aaa99 ("pNFS/files: Ensure pNFS allocation modes are consistent with nfsiod")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Michal Luczaj says:
====================
af_unix: Fix GC and improve selftest
Series deals with AF_UNIX garbage collector mishandling some in-flight
graph cycles. Embryos carrying OOB packets with SCM_RIGHTS cause issues.
Patch 1/2 fixes the memory leak.
Patch 2/2 tweaks the selftest for a better OOB coverage.
v3:
- Patch 1/2: correct the commit message (Kuniyuki)
v2: https://lore.kernel.org/netdev/20240516145457.1206847-1-mhal@rbox.co/
- Patch 1/2: remove WARN_ON_ONCE() (Kuniyuki)
- Combine both patches into a series (Kuniyuki)
v1: https://lore.kernel.org/netdev/20240516103049.1132040-1-mhal@rbox.co/
====================
Link: https://lore.kernel.org/r/20240517093138.1436323-1-mhal@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
scm_rights.c covers various test cases for inflight file descriptors
and garbage collector for AF_UNIX sockets.
Currently, SCM_RIGHTS messages are sent with 3-bytes string, and it's
not good for MSG_OOB cases, as SCM_RIGTS cmsg goes with the first 2-bytes,
which is non-OOB data.
Let's send SCM_RIGHTS messages with 1-byte character to pack SCM_RIGHTS
into OOB data.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
GC attempts to explicitly drop oob_skb's reference before purging the hit
list.
The problem is with embryos: kfree_skb(u->oob_skb) is never called on an
embryo socket.
The python script below [0] sends a listener's fd to its embryo as OOB
data. While GC does collect the embryo's queue, it fails to drop the OOB
skb's refcount. The skb which was in embryo's receive queue stays as
unix_sk(sk)->oob_skb and keeps the listener's refcount [1].
Tell GC to dispose embryo's oob_skb.
[0]:
from array import array
from socket import *
addr = '\x00unix-oob'
lis = socket(AF_UNIX, SOCK_STREAM)
lis.bind(addr)
lis.listen(1)
s = socket(AF_UNIX, SOCK_STREAM)
s.connect(addr)
scm = (SOL_SOCKET, SCM_RIGHTS, array('i', [lis.fileno()]))
s.sendmsg([b'x'], [scm], MSG_OOB)
lis.close()
[1]
$ grep unix-oob /proc/net/unix
$ ./unix-oob.py
$ grep unix-oob /proc/net/unix
0000000000000000: 00000002 00000000 00000000 0001 02 0 @unix-oob
0000000000000000: 00000002 00000000 00010000 0001 01 6072 @unix-oob
Fixes: 4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The compatible pattern "st,stm32-sai-sub-[ab]" is missing starting and
ending anchors, so any prefix and/or suffix would still be valid.
This also fixes a warning on the example:
Documentation/devicetree/bindings/sound/st,stm32-sai.example.dtb: /example-0/sai@4400b000/audio-controller@4400b004: failed to match any schema with compatible: ['st,stm32-sai-sub-a']
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://msgid.link/r/20240520222705.1742367-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In dctcp_update_alpha(), we use a module parameter dctcp_shift_g
as follows:
alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g);
...
delivered_ce <<= (10 - dctcp_shift_g);
It seems syzkaller started fuzzing module parameters and triggered
shift-out-of-bounds [0] by setting 100 to dctcp_shift_g:
memcpy((void*)0x20000080,
"/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47);
res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul,
/*flags=*/2ul, /*mode=*/0ul);
memcpy((void*)0x20000000, "100\000", 4);
syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul);
Let's limit the max value of dctcp_shift_g by param_set_uint_minmax().
With this patch:
# echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g
# cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g
10
# echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g
-bash: echo: write error: Invalid argument
[0]:
UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12
shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int')
CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468
dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143
tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline]
tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948
tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711
tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937
sk_backlog_rcv include/net/sock.h:1106 [inline]
__release_sock+0x20f/0x350 net/core/sock.c:2983
release_sock+0x61/0x1f0 net/core/sock.c:3549
mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907
mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976
__mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072
mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127
inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437
__sock_release net/socket.c:659 [inline]
sock_close+0xc0/0x240 net/socket.c:1421
__fput+0x41b/0x890 fs/file_table.c:422
task_work_run+0x23b/0x300 kernel/task_work.c:180
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x9c8/0x2540 kernel/exit.c:878
do_group_exit+0x201/0x2b0 kernel/exit.c:1027
__do_sys_exit_group kernel/exit.c:1038 [inline]
__se_sys_exit_group kernel/exit.c:1036 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x7f6c2b5005b6
Code: Unable to access opcode bytes at 0x7f6c2b50058c.
RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6
RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001
RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0
R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
</TASK>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Yue Sun <samsun1006219@gmail.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/netdev/CAEkJfYNJM=cw-8x7_Vmj1J6uYVCWMbbvD=EFmDPVBGpTsqOxEA@mail.gmail.com/
Fixes: e3118e8359bb ("net: tcp: add DCTCP congestion control algorithm")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240517091626.32772-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to the TPS6594 PMIC Manual (linked) 8.3.2.1.4 Multi-Phase BUCK
Regulator Configurations section, the PMIC ignores all the other bucks'
except the primary buck's regulator registers. This is BUCK1 for
configurations BUCK12, BUCK123 and BUCK1234 while it is BUCK3 for
BUCK34. Correct the registers mapped for these configurations
accordingly.
Fixes: f17ccc5deb4d ("regulator: tps6594-regulator: Add driver for TI TPS6594 regulators")
Link: https://www.ti.com/lit/gpn/tps6594-q1
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://msgid.link/r/20240521094758.2190331-1-n-francis@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Test arp_ndisc_untracked_subnets use tcpdump to filter the unsolicited
and untracked na messages. It set -e before calling tcpdump. But if
tcpdump filters 0 packet, it will return none zero, and cause the script
to exit.
Instead of using slow tcpdump to capture packets, let's using tc rule
to filter out the na message.
At the same time, fix function setup_v6 which only needs one parameter.
Move all the related helpers from forwarding lib.sh to net lib.sh.
Fixes: 0ea7b0a454ca ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240517010327.2631319-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
seg6_hmac_init_algo returns without cleaning up the previous allocations
if one fails, so it's going to leak all that memory and the crypto tfms.
Update seg6_hmac_exit to only free the memory when allocated, so we can
reuse the code directly.
Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Closes: https://lore.kernel.org/netdev/Zj3bh-gE7eT6V6aH@hog/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240517005435.2600277-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Billy Jheng Bing-Jhong reported a race between __unix_gc() and
queue_oob().
__unix_gc() tries to garbage-collect close()d inflight sockets,
and then if the socket has MSG_OOB in unix_sk(sk)->oob_skb, GC
will drop the reference and set NULL to it locklessly.
However, the peer socket still can send MSG_OOB message and
queue_oob() can update unix_sk(sk)->oob_skb concurrently, leading
NULL pointer dereference. [0]
To fix the issue, let's update unix_sk(sk)->oob_skb under the
sk_receive_queue's lock and take it everywhere we touch oob_skb.
Note that we defer kfree_skb() in manage_oob() to silence lockdep
false-positive (See [1]).
[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000008
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
PGD 8000000009f5e067 P4D 8000000009f5e067 PUD 9f5d067 PMD 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc5-00191-gd091e579b864 #110
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events delayed_fput
RIP: 0010:skb_dequeue (./include/linux/skbuff.h:2386 ./include/linux/skbuff.h:2402 net/core/skbuff.c:3847)
Code: 39 e3 74 3e 8b 43 10 48 89 ef 83 e8 01 89 43 10 49 8b 44 24 08 49 c7 44 24 08 00 00 00 00 49 8b 14 24 49 c7 04 24 00 00 00 00 <48> 89 42 08 48 89 10 e8 e7 c5 42 00 4c 89 e0 5b 5d 41 5c c3 cc cc
RSP: 0018:ffffc900001bfd48 EFLAGS: 00000002
RAX: 0000000000000000 RBX: ffff8880088f5ae8 RCX: 00000000361289f9
RDX: 0000000000000000 RSI: 0000000000000206 RDI: ffff8880088f5b00
RBP: ffff8880088f5b00 R08: 0000000000080000 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000001 R12: ffff8880056b6a00
R13: ffff8880088f5280 R14: 0000000000000001 R15: ffff8880088f5a80
FS: 0000000000000000(0000) GS:ffff88807dd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000006314000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
unix_release_sock (net/unix/af_unix.c:654)
unix_release (net/unix/af_unix.c:1050)
__sock_release (net/socket.c:660)
sock_close (net/socket.c:1423)
__fput (fs/file_table.c:423)
delayed_fput (fs/file_table.c:444 (discriminator 3))
process_one_work (kernel/workqueue.c:3259)
worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416)
kthread (kernel/kthread.c:388)
ret_from_fork (arch/x86/kernel/process.c:153)
ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
</TASK>
Modules linked in:
CR2: 0000000000000008
Link: https://lore.kernel.org/netdev/a00d3993-c461-43f2-be6d-07259c98509a@rbox.co/ [1]
Fixes: 1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.")
Reported-by: Billy Jheng Bing-Jhong <billy@starlabs.sg>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240516134835.8332-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 7274c4147afbf46f45b8501edbdad6da8cd013b9.
Ken reported that RTL8125b can lock up if gro_flush_timeout has the
default value of 20000 and napi_defer_hard_irqs is set to 0.
In this scenario device interrupts aren't disabled, what seems to
trigger some silicon bug under heavy load. I was able to reproduce this
behavior on RTL8168h. Fix this by reverting 7274c4147afb.
Fixes: 7274c4147afb ("r8169: don't try to disable interrupts if NAPI is scheduled already")
Cc: stable@vger.kernel.org
Reported-by: Ken Milmore <ken.milmore@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/9b5b6f4c-4f54-4b90-b0b3-8d8023c2e780@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge an amd-pstate driver fix for 6.10-rc1:
- Fix a memory leak in the exit path of amd-pstate (Peng Ma).
* pm-cpufreq:
cpufreq: amd-pstate: fix memory leak on CPU EPP exit
|
|
Add VID and PID to the xpad_device and VID to the xpad_table
to allow driver to use Machenike G5 Pro Controller, which is
XTYPE_XBOX360 compatible in Xinput mode.
Signed-off-by: Kirill Artemev <artewar6767@gmail.com>
Link: https://lore.kernel.org/r/20240516032926.12501-2-artewar6767@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When asn1_encode_sequence() fails, WARN is not the correct solution.
1. asn1_encode_sequence() is not an internal function (located
in lib/asn1_encode.c).
2. Location is known, which makes the stack trace useless.
3. Results a crash if panic_on_warn is set.
It is also noteworthy that the use of WARN is undocumented, and it
should be avoided unless there is a carefully considered rationale to
use it.
Replace WARN with pr_err, and print the return value instead, which is
only useful piece of information.
Cc: stable@vger.kernel.org # v5.13+
Fixes: f2219745250f ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
'scratch' is never freed. Fix this by calling kfree() in the success, and
in the error case.
Cc: stable@vger.kernel.org # +v5.13
Fixes: f2219745250f ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"One patch slightly improves the text in a comment.
The other patch (on minmax.cocci) removes a report about ? being used
in return statements that has been generating not very useful
suggestions to change idiomatic code"
* tag 'cocci-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Coccinelle: pm_runtime: Fix grammar in comment
coccinelle: misc: minmax: Suppress reports for err returns
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"These are a few cross-architecture cleanup patches:
- separate out fbdev support from the asm/video.h contents that may
be used by either the old fbdev drivers or the newer drm display
code (Thomas Zimmermann)
- cleanups for the generic bitops code and asm-generic/bug.h
(Thorsten Blum)
- remove the orphaned include/asm-generic/page.h header that used to
be included by long-removed mmu-less architectures (me)"
* tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: Fix name collision with ACPI's video.o
bug: Improve comment
asm-generic: remove unused asm-generic/page.h
arch: Rename fbdev header and source files
arch: Remove struct fb_info from video helpers
arch: Select fbdev helpers with CONFIG_VIDEO
bitops: Change function return types from long to int
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC devicetree updates from Arnd Bergmann:
"This is a follow-up to an earlier pull request for device tree
changes, as three platform maintainers sent their contents too late to
be included in the main set, but had not caused any further problems
since then:
- The Amlogic platform now containts support for two new SoC types,
the A4 and A5 chips for audio applications. Both come with a
reference board, and one more dts file gets addded for the
combination of the MNT Reform Laptop with the BPI-CM4 CPU module
- The ASpeed platform adds support for six addititional server
platforms that use ast2500 or ast2600 as their BMC, while another
one gets removed
- The RISC-V platforms from Microchip, Starfive and and T-HEAD get
additional features for existing hardware, plus the addition of the
Milk-V Mars based on the StarFive VisionFive v2 board"
* tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits)
riscv: dts: microchip: add pac1934 power-monitor to icicle
riscv: dts: thead: Fix node ordering in TH1520 device tree
ARM: dts: aspeed: Add ASRock E3C256D4I BMC
dt-bindings: arm: aspeed: document ASRock E3C256D4I
dt-bindings: trivial-devices: add isil,isl69269
ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
dt-bindings: arm: aspeed: add ASUS X4TF board
ARM: dts: aspeed: Remove Facebook Cloudripper dts
ARM: dts: aspeed: drop unused ref_voltage ADC property
ARM: dts: aspeed: harma: correct Mellanox multi-host property
ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property
ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property
ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property
ARM: dts: aspeed: Modify I2C bus configuration
ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC
ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC
ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k
ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels
ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card
ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name
...
|
|
Pull vfio updates from Alex Williamson:
- The vfio fsl-mc bus driver has become orphaned. We'll consider
removing it in future releases if a new maintainer isn't found (Alex
Williamson)
- Improved usage of opaque data in vfio-pci INTx handling, avoiding
lookups of the eventfd through the interrupt and irqfd runtime paths
(Alex Williamson)
- Resolve an error path memory leak introduced in vfio-pci interrupt
code (Ye Bin)
- Addition of interrupt support for vfio devices exposed on the CDX
bus, including a new MSI allocation helper and export of existing
helpers for MSI alloc and free (Nipun Gupta)
- A new vfio-pci variant driver supporting migration of Intel QAT VF
devices for the GEN4 PFs (Xin Zeng & Yahui Cao)
- Resolve a possibly circular locking dependency in vfio-pci by
avoiding copy_to_user() from a PCI bus walk callback (Alex
Williamson)
- Trivial docs update to remove a duplicate semicolon (Foryun Ma)
* tag 'vfio-v6.10-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Restore zero affected bus reset devices warning
vfio: remove an extra semicolon
vfio/pci: Collect hot-reset devices to local buffer
vfio/qat: Add vfio_pci driver for Intel QAT SR-IOV VF devices
vfio/cdx: add interrupt support
genirq/msi: Add MSI allocation helper and export MSI functions
vfio/pci: fix potential memory leak in vfio_intx_enable()
vfio/pci: Pass eventfd context object through irqfd
vfio/pci: Pass eventfd context to IRQ handler
MAINTAINERS: Orphan vfio fsl-mc bus driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Revert framework change to add D_GNU_SOURCE to KHDR_INCLUDES to
Makefile, lib.mk, and kselftest_harness.h and follow-on changes to
cgroup and sgx test as they are causing build failures and warnings"
* tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Revert "selftests/cgroup: Drop define _GNU_SOURCE"
Revert "selftests/sgx: Include KHDR_INCLUDES in Makefile"
Revert "selftests: Compile kselftest headers with -D_GNU_SOURCE"
|
|
Small APUs(i.e., consumer, embedded products) usually have a small
carveout device memory which can't satisfy most compute workloads
memory allocation requirements.
We can't even run a Basic MNIST Example with a default 512MB carveout.
https://github.com/pytorch/examples/tree/main/mnist. Error Log:
"torch.cuda.OutOfMemoryError: HIP out of memory. Tried to allocate
84.00 MiB. GPU 0 has a total capacity of 512.00 MiB of which 0 bytes
is free. Of the allocated memory 103.83 MiB is allocated by PyTorch,
and 22.17 MiB is reserved by PyTorch but unallocated"
Though we can change BIOS settings to enlarge carveout size,
which is inflexible and may bring complaint. On the other hand,
the memory resource can't be effectively used between host and device.
The solution is MI300A approach, i.e., let VRAM allocations go to GTT.
Then device and host can flexibly and effectively share memory resource.
v2: Report local_mem_size_private as 0. (Felix)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Observed on gfx8 ASIC where KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM is used.
Two attachments use the same VM, root PD would be locked twice.
[ 57.910418] Call Trace:
[ 57.793726] ? reserve_bo_and_cond_vms+0x111/0x1c0 [amdgpu]
[ 57.793820] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x6c/0x1c0 [amdgpu]
[ 57.793923] ? idr_get_next_ul+0xbe/0x100
[ 57.793933] kfd_process_device_free_bos+0x7e/0xf0 [amdgpu]
[ 57.794041] kfd_process_wq_release+0x2ae/0x3c0 [amdgpu]
[ 57.794141] ? process_scheduled_works+0x29c/0x580
[ 57.794147] process_scheduled_works+0x303/0x580
[ 57.794157] ? __pfx_worker_thread+0x10/0x10
[ 57.794160] worker_thread+0x1a2/0x370
[ 57.794165] ? __pfx_worker_thread+0x10/0x10
[ 57.794167] kthread+0x11b/0x150
[ 57.794172] ? __pfx_kthread+0x10/0x10
[ 57.794177] ret_from_fork+0x3d/0x60
[ 57.794181] ? __pfx_kthread+0x10/0x10
[ 57.794184] ret_from_fork_asm+0x1b/0x30
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit 2fd001cd3600 ("arch: Rename fbdev header and source files")
renames the video source files under arch/ such that they do not
refer to fbdev any longer. The new files named video.o conflict with
ACPI's video.ko module. Modprobing the ACPI module can then fail with
warnings about missing symbols, as shown below.
(i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_unregister (err -2)
(i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_register_backlight (err -2)
(i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol __acpi_video_get_backlight_type (err -2)
(i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_register (err -2)
Fix the issue by renaming the architecture's video.o to video-common.o.
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/intel-gfx/9dcac6e9-a3bf-4ace-bbdc-f697f767f9e0@suse.de/T/#t
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 2fd001cd3600 ("arch: Rename fbdev header and source files")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've tried to address some performance issues on zoned
storage such as direct IO and write_hints. In addition, we've migrated
some IO paths using folio. Meanwhile, there are multiple bug fixes in
the compression paths, sanity check conditions, and error handlers.
Enhancements:
- allow direct io of pinned files for zoned storage
- assign the write hint per stream by default
- convert read paths and test_writeback to folio
- avoid allocating WARM_DATA segment for direct IO
Bug fixes:
- fix false alarm on invalid block address
- fix to add missing iput() in gc_data_segment()
- fix to release node block count in error path of
f2fs_new_node_page()
- compress:
- don't allow unaligned truncation on released compress inode
- cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
- fix error path of inc_valid_block_count()
- fix to update i_compr_blocks correctly
- fix block migration when section is not aligned to pow2
- don't trigger OPU on pinfile for direct IO
- fix to do sanity check on i_xattr_nid in sanity_check_inode()
- write missing last sum blk of file pinning section
- clear writeback when compression failed
- fix to adjust appropirate defragment pg_end
As usual, there are several minor code clean-ups, and fixes to manage
missing corner cases in the error paths"
* tag 'f2fs-for-6.10.rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits)
f2fs: initialize last_block_in_bio variable
f2fs: Add inline to f2fs_build_fault_attr() stub
f2fs: fix some ambiguous comments
f2fs: fix to add missing iput() in gc_data_segment()
f2fs: allow dirty sections with zero valid block for checkpoint disabled
f2fs: compress: don't allow unaligned truncation on released compress inode
f2fs: fix to release node block count in error path of f2fs_new_node_page()
f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
f2fs: compress: fix error path of inc_valid_block_count()
f2fs: compress: fix typo in f2fs_reserve_compress_blocks()
f2fs: compress: fix to update i_compr_blocks correctly
f2fs: check validation of fault attrs in f2fs_build_fault_attr()
f2fs: fix to limit gc_pin_file_threshold
f2fs: remove unused GC_FAILURE_PIN
f2fs: use f2fs_{err,info}_ratelimited() for cleanup
f2fs: fix block migration when section is not aligned to pow2
f2fs: zone: fix to don't trigger OPU on pinfile for direct IO
f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
f2fs: fix to avoid allocating WARM_DATA segment for direct IO
f2fs: remove redundant parameter in is_next_segment_free()
...
|
|
Pull xfs updates from Chandan Babu:
"Online repair feature continues to be expanded. Also, we now support
delayed allocation for realtime devices which have an extent size that
is equal to filesystem's block size.
New code:
- Introduce Parent Pointer extended attribute for inodes
- Bring back delalloc support for realtime devices which have an
extent size that is equal to filesystem's block size
- Improve performance of log incompat feature handling
Online Repair:
- Implement atomic file content exchanges i.e. exchange ranges of
bytes between two files atomically
- Create temporary files to repair file-based metadata. This uses
atomic file content exchange facility to swap file fork mappings
between the temporary file and the metadata inode
- Allow callers of directory/xattr code to set an explicit owner
number to be written into the header fields of any new blocks that
are created. This is required to avoid walking every block of the
new structure and modify their ownership during online repair
- Repair more data structures:
- Extended attributes
- Inode unlinked state
- Directories
- Symbolic links
- AGI's unlinked inode list
- Parent pointers
- Move Orphan files to lost and found directory
- Fixes for Inode repair functionality
- Introduce a new sub-AG FITRIM implementation to reduce the duration
for which the AGF lock is held
- Updates for the design documentation
- Use Parent Pointers to assist in checking directories, parent
pointers, extended attributes, and link counts
Fixes:
- Prevent userspace from reading invalid file data due to incorrect.
updation of file size when performing a non-atomic clone operation
- Minor fixes to online repair
- Fix confusing return values from xfs_bmapi_write()
- Fix an out of bounds access due to incorrect h_size during log
recovery
- Defer upgrading the extent counters in xfs_reflink_end_cow_extent()
until we know we are going to modify the extent mapping
- Remove racy access to if_bytes check in
xfs_reflink_end_cow_extent()
- Fix sparse warnings
Cleanups:
- Hold inode locks on all files involved in a rename until the
completion of the operation. This is in preparation for the parent
pointers patchset where parent pointers are applied in a separate
chained update from the actual directory update
- Compile out v4 support when disabled
- Cleanup xfs_extent_busy_clear()
- Remove unused flags and fields from struct xfs_da_args
- Remove definitions of unused functions
- Improve extended attribute validation
- Add higher level directory operations helpers to remove duplication
of code
- Cleanup quota (un)reservation interfaces"
* tag 'xfs-6.10-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (221 commits)
xfs: simplify iext overflow checking and upgrade
xfs: remove a racy if_bytes check in xfs_reflink_end_cow_extent
xfs: upgrade the extent counters in xfs_reflink_end_cow_extent later
xfs: xfs_quota_unreserve_blkres can't fail
xfs: consolidate the xfs_quota_reserve_blkres definitions
xfs: clean up buffer allocation in xlog_do_recovery_pass
xfs: fix log recovery buffer allocation for the legacy h_size fixup
xfs: widen flags argument to the xfs_iflags_* helpers
xfs: minor cleanups of xfs_attr3_rmt_blocks
xfs: create a helper to compute the blockcount of a max sized remote value
xfs: turn XFS_ATTR3_RMT_BUF_SPACE into a function
xfs: use unsigned ints for non-negative quantities in xfs_attr_remote.c
xfs: do not allocate the entire delalloc extent in xfs_bmapi_write
xfs: fix xfs_bmap_add_extent_delay_real for partial conversions
xfs: remove the xfs_iext_peek_prev_extent call in xfs_bmapi_allocate
xfs: pass the actual offset and len to allocate to xfs_bmapi_allocate
xfs: don't open code XFS_FILBLKS_MIN in xfs_bmapi_write
xfs: lift a xfs_valid_startblock into xfs_bmapi_allocate
xfs: remove the unusued tmp_logflags variable in xfs_bmapi_allocate
xfs: fix error returns from xfs_bmapi_write
...
|
|
Commit 4f563a64732d ("block: add a max_user_discard_sectors queue
limit") changed block core to set max_discard_sectors to:
min(lim->max_hw_discard_sectors, lim->max_user_discard_sectors)
Since commit 1c0e720228ad ("dm: use queue_limits_set") it was reported
dm-thinp was failing in a few fstests (generic/347 and generic/405)
with the first WARN_ON_ONCE in dm_cell_key_has_valid_range() being
reported, e.g.:
WARNING: CPU: 1 PID: 30 at drivers/md/dm-bio-prison-v1.c:128 dm_cell_key_has_valid_range+0x3d/0x50
blk_set_stacking_limits() sets max_user_discard_sectors to UINT_MAX,
so given how block core now sets max_discard_sectors (detailed above)
it follows that blk_stack_limits() stacks up the underlying device's
max_hw_discard_sectors and max_discard_sectors is set to match it. If
max_hw_discard_sectors exceeds dm's BIO_PRISON_MAX_RANGE, then
dm_cell_key_has_valid_range() will trigger the warning with:
WARN_ON_ONCE(key->block_end - key->block_begin > BIO_PRISON_MAX_RANGE)
Aside from this warning, the discard will fail. Fix this and other DM
issues by governing discard support in terms of max_hw_discard_sectors
instead of max_discard_sectors.
Reported-by: Theodore Ts'o <tytso@mit.edu>
Fixes: 1c0e720228ad ("dm: use queue_limits_set")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull isofs, udf, quota, ext2, and reiserfs updates from Jan Kara:
- convert isofs to the new mount API
- cleanup isofs Makefile
- udf conversion to folios
- some other small udf cleanups and fixes
- ext2 cleanups
- removal of reiserfs .writepage method
- update reiserfs README file
* tag 'fs_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: Use *-y instead of *-objs in Makefile
ext2: Remove LEGACY_DIRECT_IO dependency
isofs: Remove calls to set/clear the error flag
ext2: Remove call to folio_set_error()
udf: Use a folio in udf_write_end()
udf: Convert udf_page_mkwrite() to use a folio
udf: Convert udf_symlink_getattr() to use a folio
udf: Convert udf_adinicb_readpage() to udf_adinicb_read_folio()
udf: Convert udf_expand_file_adinicb() to use a folio
udf: Convert udf_write_begin() to use a folio
udf: Convert udf_symlink_filler() to use a folio
reiserfs: Trim some README bits
quota: fix to propagate error of mark_dquot_dirty() to caller
reiserfs: Convert to writepages
udf: udftime: prevent overflow in udf_disk_stamp_to_time()
ext2: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
udf: replace deprecated strncpy/strcpy with strscpy
udf: Remove second semicolon
isofs: convert isofs to use the new mount API
fs: quota: use group allocation of per-cpu counters API
|
|
dm-integrity could set discard_granularity lower than the logical block
size. This could result in failures when sending discard requests to
dm-integrity.
This fix is needed for kernels prior to 6.10.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Eric Wheeler <linux-integrity@lists.ewheeler.net>
Cc: stable@vger.kernel.org # <= 6.9
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
This reverts commit e6595224464b692ddae193d783402130d1625147.
These kinds of patches are only making the code worse.
Compilers don't care about the unnecessary check, but removing it makes
the code less obvious to a human. The declaration of 'len' is more than
80 lines earlier, so a human won't easily see that 'len' is of an
unsigned type, so to a human the range check that checks against zero is
much more explicit and obvious.
Any tool that complains about a range check like this just because the
variable is unsigned is actively detrimental, and should be ignored.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- reduce overhead of fsnotify infrastructure when no permission events
are in use
- a few small cleanups
* tag 'fsnotify_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: fix UAF from FS_ERROR event on a shutting down filesystem
fsnotify: optimize the case of no permission event watchers
fsnotify: use an enum for group priority constants
fsnotify: move s_fsnotify_connectors into fsnotify_sb_info
fsnotify: lazy attach fsnotify_sb_info state to sb
fsnotify: create helper fsnotify_update_sb_watchers()
fsnotify: pass object pointer and type to fsnotify mark helpers
fanotify: merge two checks regarding add of ignore mark
fsnotify: create a wrapper fsnotify_find_inode_mark()
fsnotify: create helpers to get sb and connp from object
fsnotify: rename fsnotify_{get,put}_sb_connectors()
fsnotify: Avoid -Wflex-array-member-not-at-end warning
fanotify: remove unneeded sub-zero check for unsigned value
|
|
s/does not use unnecessary/do not unnecessarily use/
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
Most of the people prefer:
return ret < 0 ? ret: 0;
than:
return min(ret, 0);
Let's tweak the cocci file to ignore those lines completely.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
The data-sheet for TPS6287x-Q1
https://www.ti.com/lit/ds/symlink/tps62873-q1.pdf
states at chapter 9.3.6.1 Output Voltage Range:
"Note that every change to the VRANGE[1:0] bits must be followed by a
write to the VSET register, even if the value of the VSET[7:0] bits does
not change."
The current implementation of the driver uses the
regulator_set_voltage_sel_pickable_regmap() helper which further uses
regmap_update_bits() to write the VSET-register. The
regmap_update_bits() will not access the hardware if the new register
value is same as old. It is worth noting that this is true also when the
register is marked volatile, which I can't say is wrong because
'read-mnodify-write'-cycle with a volatile register is in any case
something user should carefully consider.
The 'range_applied_by_vsel'-flag in regulator desc was added to force
the vsel register upodates by using regmap_write_bits(). This variant
will always unconditionally write the bits to the hardware.
It is worth noting that the vsel is now forced to be written to the
hardware, whether the range was changed or not. This may cause a
performance drop if users are wrtiting same voltage value repeteadly.
It would be possible to read the range register to determine if it was
changed, but this would be a performance issue for users who don't use
reg cache for vsel.
Always write the VSET register to the hardware regardless the cache.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 7b0518fbf2be ("regulator: Add support for TI TPS6287x regulators")
Link: https://msgid.link/r/ZktD50C5twF1EuKu@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, each DEFLATE stream takes one 32 KiB permanent internal
window buffer even if there is no running instance which uses DEFLATE
algorithm.
It's unexpected and wasteful on embedded devices with limited resources
and servers with hundreds of CPU cores if DEFLATE is enabled but unused.
Fixes: ffa09b3bd024 ("erofs: DEFLATE compression support")
Cc: <stable@vger.kernel.org> # 6.6+
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240520090106.2898681-1-hsiangkao@linux.alibaba.com
|
|
Some PMICs treat the vsel_reg same as apply-bit. Eg, when voltage range
is changed, the new voltage setting is not taking effect until the vsel
register is written.
Add a flag 'range_applied_by_vsel' to the regulator desc to indicate this
behaviour and to force the vsel value to be written to hardware if range
was changed, even if the old selector was same as the new one.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://msgid.link/r/ZktCpcGZdgHWuN_L@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- optimize DMA sync calls when they are no-ops (Alexander Lobakin)
- fix swiotlb padding for untrusted devices (Michael Kelley)
- add documentation for swiotb (Michael Kelley)
* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
dma: fix DMA sync for drivers not calling dma_set_mask*()
xsk: use generic DMA sync shortcut instead of a custom one
page_pool: check for DMA sync shortcut earlier
page_pool: don't use driver-set flags field directly
page_pool: make sure frag API fields don't span between cachelines
iommu/dma: avoid expensive indirect calls for sync operations
dma: avoid redundant calls for sync operations
dma: compile-out DMA sync op calls when not used
iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
Documentation/core-api: add swiotlb documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (24 commits)
MIPS: Take in account load hazards for HI/LO restoring
MIPS: SGI-IP27: use WARN_ON() output
MIPS: SGI-IP27: fix -Wunused-variable in arch_init_irq()
MIPS: SGI-IP27: micro-optimize arch_init_irq()
mips: dts: ralink: mt7621: reorder the attributes of the root node
mips: dts: ralink: mt7621: reorder pci?_phy attributes
mips: dts: ralink: mt7621: reorder pcie node attributes and children
mips: dts: ralink: mt7621: reorder ethernet node attributes and kids
mips: dts: ralink: mt7621: reorder gic node attributes
mips: dts: ralink: mt7621: reorder mmc node attributes
mips: dts: ralink: mt7621: move pinctrl and sort its children
mips: dts: ralink: mt7621: reorder spi0 node attributes
mips: dts: ralink: mt7621: reorder i2c node attributes
mips: dts: ralink: mt7621: reorder gpio node attributes
mips: dts: ralink: mt7621: reorder sysc node attributes
mips: dts: ralink: mt7621: reorder mmc regulator attributes
mips: dts: ralink: mt7621: reorder cpuintc node attributes
mips: dts: ralink: mt7621: reorder cpu node attributes
MIPS: Add prototypes for plat_post_relocation() and relocate_kernel()
MIPS: Octeon: Add PCIe link status check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi updates from Jean Delvare:
"Bug fixes:
- KCFI violation in dmi-id
- stop decoding on broken (short) DMI table entry
New features:
- print info about populated memory slots at boot"
* tag 'dmi-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Add info message for number of populated and total memory slots
firmware: dmi: Stop decoding on broken entry
firmware: dmi-id: add a release callback function
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Lenovo SE10 platform Watchdog Driver
- Other small fixes and improvements
* tag 'linux-watchdog-6.10-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: LENOVO_SE10_WDT should depend on X86 && DMI
watchdog: sa1100: Fix PTR_ERR_OR_ZERO() vs NULL check in sa1100dog_probe()
watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin
watchdog: add HAS_IOPORT dependencies
watchdog/wdt-main: Use cpumask_of() to avoid cpumask var on stack
watchdog: bd9576: Drop "always-running" property
watchdog: mtx-1: drop driver owner assignment
watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger
watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c core removes an argument from the i2c_mux_add_adapter() call to
further deprecate class based I2C device instantiation. All users are
converted, too.
Other that that, Andi collected a number if I2C host driver patches.
Those merges have their own description"
* tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits)
power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter()
i2c: mux: Remove class argument from i2c_mux_add_adapter()
i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
i2c: acpi: Unbind mux adapters before delete
i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
i2c: pxa: use 'time_left' variable with wait_event_timeout()
i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
i2c: rk3x: use 'time_left' variable with wait_event_timeout()
i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout()
i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout()
i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout()
i2c: st: use 'time_left' variable with wait_for_completion_timeout()
i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout()
i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout()
i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout()
i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout()
i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries
New drivers:
- Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450 pin control support
Improvements:
- Serious cleanup of the recently merged aw9523 driver
- Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single
- A slew of device tree binding cleanups
- Support a bus clock in the Samsung driver"
* tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
pinctrl: bcm2835: Make pin freeing behavior configurable
dt-bindings: pinctrl: qcom,pmic-gpio: Fix "comptaible" typo for PMIH0108
pinctrl: qcom: pinctrl-sm7150: Fix sdc1 and ufs special pins regs
dt-bindings: pinctrl: mediatek: mt7622: add "antsel" function
dt-bindings: pinctrl: mediatek: mt7622: fix array properties
pinctrl: samsung: drop redundant drvdata assignment
pinctrl: samsung: support a bus clock
dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
pinctrl: renesas: rzg2l: Limit 2.5V power supply to Ethernet interfaces
pinctrl: renesas: r8a779h0: Add INTC-EX pins, groups, and function
pinctrl: renesas: r8a779h0: Fix IRQ suffixes
pinctrl: renesas: rzg2l: Remove extra space in function parameter
dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901
pinctrl: pinconf-generic: print hex value
pinctrl: realtek: fix module autoloading
pinctrl: qcom: sm7150: fix module autoloading
pinctrl: loongson2: fix module autoloading
pinctrl: mediatek: fix module autoloading
pinctrl: freescale: imx8ulp: fix module autoloading
dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a bug in the new ecc P521 code as well as a buggy fix in qat"
* tag 'v6.10-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ecc - Prevent ecc_digits_from_bytes from reading too many bytes
crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak
|
|
Under the scenario of IB device bonding, when bringing down one of the
ports, or all ports, we saw xprtrdma entering a non-recoverable state
where it is not even possible to complete the disconnect and shut it
down the mount, requiring a reboot. Following debug, we saw that
transport connect never ended after receiving the
RDMA_CM_EVENT_DEVICE_REMOVAL callback.
The DEVICE_REMOVAL callback is irrespective of whether the CM_ID is
connected, and ESTABLISHED may not have happened. So need to work with
each of these states accordingly.
Fixes: 2acc5cae2923 ('xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed')
Cc: Sagi Grimberg <sagi.grimberg@vastdata.com>
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
This came up during one of the Bake-a-thon discussions. NFS v2 support
was dropped from nfs-utils/mount.nfs in December 2021. Let's turn it
off by default in the kernel too, since this means there isn't a way
to mount and test it.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reviewed-by: Jeffrey Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Olga showed me a case where the client was sending multiple READ_PLUS
calls to the server in parallel, and the server replied
NFS4ERR_OPNOTSUPP to each. The client would fall back to READ for the
first reply, but fail to retry the other calls.
I fix this by removing the test for NFS_CAP_READ_PLUS in
nfs4_read_plus_not_supported(). This allows us to reschedule any
READ_PLUS call that has a NFS4ERR_OPNOTSUPP return value, even after the
capability has been cleared.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: c567552612ec ("NFS: Add READ_PLUS data segment support")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
It used to be quite awhile ago since 1b63a75180c6 ('SUNRPC: Refactor
rpc_clone_client()'), in 2012, that `cl_timeout` was copied in so that
all mount parameters propagate to NFSACL clients. However since that
change, if mount options as follows are given:
soft,timeo=50,retrans=16,vers=3
The resultant NFSACL client receives:
cl_softrtry: 1
cl_timeout: to_initval=60000, to_maxval=60000, to_increment=0, to_retries=2, to_exponential=0
These values lead to NFSACL operations not being retried under the
condition of transient network outages with soft mount. Instead, getacl
call fails after 60 seconds with EIO.
The simple fix is to pass the existing client's `cl_timeout` as the new
client timeout.
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/all/20231105154857.ryakhmgaptq3hb6b@gmail.com/T/
Fixes: 1b63a75180c6 ('SUNRPC: Refactor rpc_clone_client()')
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
In the case where we have received a successful reply to an RPC request,
but while processing the reply the client in rpc_decode_header() finds
an expired context, the code ends up propagating the error to the caller
instead of getting a new context and retrying the request.
To give more details, in rpc_decode_header() we call rpcauth_checkverf()
will call into the gss and internally will at some point call
gss_validate() which has a check if the current’s context lifetime
expired, and it would fail. The reason for the failure gets ‘scrubbed’
and translated to EACCES so when we get back to rpc_decode_header() we
just go to “out_verifier” which for that error would get converted to
“out_garbage” (ie it’s treated as garballed reply) and the next
action is call_encode. Which (1) doesn’t reencode or re-send (not to
mention no upcall happens because context expires as that reason just
not known) and it again fails in the same decoding process. After
re-trying it 3 times the error is propagated back to the caller
(ie nfs4_write_done_cb() in the case a failing write).
To fix this, instead we need to look to the case where the server
decides that context has expired and replies with an RPC auth error.
In that case, the rpc_decode_header() goes to "out_msg_denied" in that
we return EKEYREJECTED which in call_decode() is sent to “call_reserve”
which triggers an upcalls and a re-try of the operation.
The proposed fix is in case of a failed rpc_decode_header() to check
if credentials were set to be invalid and use that as a proxy for
deciding that context has expired and then treat is same way as
receiving an auth error.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
With newer kernels that use fs_context for nfs mounts, remounts fail with
-EINVAL.
$ mount -t nfs -o nolock 10.0.0.1:/tmp/test /mnt/test/
$ mount -t nfs -o remount /mnt/test/
mount: mounting 10.0.0.1:/tmp/test on /mnt/test failed: Invalid argument
For remounts, the nfs server address and port are populated by
nfs_init_fs_context and later overwritten with 0x00 bytes by
nfs23_parse_monolithic. The remount then fails as the server address is
invalid.
Fix this by not overwriting nfs server info in nfs23_parse_monolithic if
we're doing a remount.
Fixes: f2aedb713c28 ("NFS: Add fs_context support.")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Dan Carpenter reports smatch warning for nfs4_try_migration() when a memory
allocation failure results in a zero return value. In this case, a
transient allocation failure error will likely be retried the next time the
server responds with NFS4ERR_MOVED.
We can fixup the smatch warning with a small refactor: attempt all three
allocations before testing and returning on a failure.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: c3ed222745d9 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Currently, mount option lock/nolock and local_lock option
may override NFS_MOUNT_LOCAL_FLOCK NFS_MOUNT_LOCAL_FCNTL flags
when passing in different order:
mount -o vers=3,local_lock=all,lock:
local_lock=none
mount -o vers=3,lock,local_lock=all:
local_lock=all
This patch will let lock/nolock override local_lock option
as nfs(5) suggested.
Signed-off-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
With two clients, each with NFSv3 mounts of the same directory, the sequence:
client1 client2
ls -l afile
echo hello there > afile
echo HELLO > afile
cat afile
will show
HELLO
there
because the O_TRUNC requested in the final 'echo' doesn't take effect.
This is because the "Negative dentry, just create a file" section in
lookup_open() assumes that the file *does* get created since the dentry
was negative, so it sets FMODE_CREATED, and this causes do_open() to
clear O_TRUNC and so the file doesn't get truncated.
Even mounting with -o lookupcache=none does not help as
nfs_neg_need_reval() always returns false if LOOKUP_CREATE is set.
This patch fixes the problem by providing an atomic_open inode operation
for NFSv3 (and v2). The code is largely the code from the branch in
lookup_open() when atomic_open is not provided. The significant change
is that the O_TRUNC flag is passed a new nfs_do_create() which add
'trunc' handling to nfs_create().
With this change we also optimise away an unnecessary LOOKUP before the
file is created.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Move from only requesting full file layout segments to requesting layout
segments that match our I/O size. This means the server is still free to
return a full file layout if it wants, but partial layouts will no
longer cause an error.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Layout segments have been supported in pNFS for years, so remove the
requirement that the server always sends whole file layouts.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Calibrated data will be set to default after loading DSP config params,
which will cause speaker protection work abnormally. Reload calibrated
data after loading DSP config params. Remove declaration of unused API
which load calibrated data in wrong sequence, changed the copyright year
and correct file name in license
header.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240518141546.1742-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TAS2552 is a Smartamp with I/V sense data, add TX path
to support capturing I/V data.
Fixes: 38803ce7b53b ("ASoC: codecs: tas*: merge .digital_mute() into .mute_stream()")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240518033515.866-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit c1457d9aad5ee2feafcf85aa9a58ab50500159d2.
The framework change to add D_GNU_SOURCE to KHDR_INCLUDES
to Makefile, lib.mk, and kselftest_harness.h is reverted
as it is causing build failures and warnings.
Revert this change as this change depends on the framework
change.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This reverts commit 2c3b8f8f37c6c0c926d584cf4158db95e62b960c.
The framework change to add D_GNU_SOURCE to KHDR_INCLUDES
to Makefile, lib.mk, and kselftest_harness.h is reverted
as it is causing build failures and warnings.
Revert this change as this change depends on the framework
change.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This reverts commit daef47b89efd0b745e8478d69a3ad724bd8b4dc6.
This framework change to add D_GNU_SOURCE to KHDR_INCLUDES
to Makefile, lib.mk, and kselftest_harness.h is causing build
failures and warnings.
Revert this change.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix the allmodconfig 'make W=1' issue:
WARNING: modpost: missing MODULE_DESCRIPTION() in block/t10-pi.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240516-md-t10-pi-v1-1-44a3469374aa@quicinc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot reported the following uninit-value access issue [1]
nci_rx_work() parses received packet from ndev->rx_q. It should be
validated header size, payload size and total packet size before
processing the packet. If an invalid packet is detected, it should be
silently discarded.
Fixes: d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Reported-and-tested-by: syzbot+d7b4dc6cd50410152534@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7b4dc6cd50410152534 [1]
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The amt.sh requires smcrouted for multicasting routing.
So, it starts smcrouted before forwarding tests.
It must be stopped after all tests, but it isn't.
To fix this issue, it kills smcrouted in the cleanup logic.
Fixes: c08e8baea78e ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The seg6_input() function is responsible for adding the SRH into a
packet, delegating the operation to the seg6_input_core(). This function
uses the skb_cow_head() to ensure that there is sufficient headroom in
the sk_buff for accommodating the link-layer header.
In the event that the skb_cow_header() function fails, the
seg6_input_core() catches the error but it does not release the sk_buff,
which will result in a memory leak.
This issue was introduced in commit af3b5158b89d ("ipv6: sr: fix BUG due
to headroom too small after SRH push") and persists even after commit
7a3f5b0de364 ("netfilter: add netfilter hooks to SRv6 data plane"),
where the entire seg6_input() code was refactored to deal with netfilter
hooks.
The proposed patch addresses the identified memory leak by requiring the
seg6_input_core() function to release the sk_buff in the event that
skb_cow_head() fails.
Fixes: af3b5158b89d ("ipv6: sr: fix BUG due to headroom too small after SRH push")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Stephen reported that he was unable to get the dsa_loop driver to get
probed, and the reason ended up being because he had CONFIG_FIXED_PHY=y
in his kernel configuration. As Masahiro explained it:
"obj-m += dsa/" means everything under dsa/ must be modular.
If there is a built-in object under dsa/ with CONFIG_NET_DSA=m,
you cannot do "obj-$(CONFIG_NET_DSA) += dsa/".
You need to change it back to "obj-y += dsa/".
This was the case here whereby CONFIG_NET_DSA=m, and so the
obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o rule is not executed and
the DSA loop mdio_board info structure is not registered with the
kernel, and eventually the device is simply not found.
To preserve the intention of the original commit of limiting the amount
of folder descending, conditionally descend into drivers/net/dsa when
CONFIG_NET_DSA is enabled.
Fixes: 227d72063fcc ("dsa: simplify Kconfig symbols and dependencies")
Reported-by: Stephen Langstaff <stephenlangstaff1@gmail.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes an assertion pop in btree_iter.c that checks for forgetting
to pass a snapshot ID when iterating over snapshots btrees.
Reported-by: syzbot+0dfe05235e38653e2aee@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes missing guards on trying to calculate a checksum with an
invalid/unknown checksum type; moving the guards up to e.g. btree_io.c
might be "more correct", but doesn't buy us anything - an unknown
checksum type will always be flagged as at least a checksum error so we
aren't losing any safety doing it this way and it makes it less likely
to accidentally pop an assert we don't want.
Reported-by: syzbot+e951ad5349f3a34a715a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Don't put error pointers in bch_fs, that's gross.
This fixes (?) the check in bch2_checksum_type_valid() - depending on
our error paths, or depending on what our error paths are doing it at
least makes the code saner.
Reported-by: syzbot+2e3cb81b5d1fe18a374b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We additionally need to be going inconsistent if passed an invalid
snapshot ID; that patch will need more thorough testing.
Reported-by: syzbot+1c9fca23fe478633b305@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+95db43b0a06f157ee865@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't disallow unknown data_types in verify() - we have to preserve
them unchanged for backwards compat; that means we have to add a few
more guards.
Reported-by: syzbot+249018ea545364f78d04@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+29f65db1a5fe427b5c56@syzkaller.appspotmail.com
Fixes: 55936afe1107 ("bcachefs: Flag btrees with missing data")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reported-by: syzbot+5c7f715a7107a608a544@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since commit a2ad63daa88b ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Do that for bcachefs so that noop_direct_IO can eventually be removed.
Similar to commit b29434999371 ("xfs: set FMODE_CAN_ODIRECT instead of
a dummy direct_IO method").
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It took me some time to understand the purpose of the tricky code at
the end of arch/x86/Kconfig.debug.
Without it, the following would be shown:
WARNING: unmet direct dependencies detected for FRAME_POINTER
because
81d387190039 ("x86/kconfig: Consolidate unwinders into multiple choice selection")
removed 'select ARCH_WANT_FRAME_POINTERS'.
The correct and more straightforward approach should have been to move
it where 'select FRAME_POINTER' is located.
Several architectures properly handle the conditional selection of
ARCH_WANT_FRAME_POINTERS. For example, 'config UNWINDER_FRAME_POINTER'
in arch/arm/Kconfig.debug.
Fixes: 81d387190039 ("x86/kconfig: Consolidate unwinders into multiple choice selection")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240204122003.53795-1-masahiroy@kernel.org
|
|
Document the Inter-Processor Communication Controller on the SDX75 Platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add compatible for the Qualcomm MSM8974 APCS block.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
Based on the work done by Tejun Heo <tj@kernel.org>
Branch: https://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git for-6.10
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The return value of pm_runtime_get_sync() in cmdq_mbox_shutdown()
will return 1 when pm runtime state is active, and we don't want to
get the warning message in this case.
So we change the return value < 0 for WARN_ON().
Fixes: 8afe816b0c99 ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add MODULE_DEVICE_TABLE(), so this module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
At least one IPI is used in TF-A for communication with PMC firmware.
If this IPI needs to be used by other agents such as RPU then, IPI
system interrupt can't be generated in mailbox driver. In such case
TF-A generates SGI to mailbox driver for IPI notification.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add support for ARM MHUv3 mailbox controller.
Support is limited to the MHUv3 Doorbell extension using only the PBX/MBX
combined interrupts.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add bindings for the ARM MHUv3 Mailbox controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The kernel FIFO queue has a couple issues. The biggest issue is that
it causes extra latency in a path that can be used in real-time tasks,
such as communication with real-time remote processors.
The whole FIFO idea itself looks to be a leftover from before the
unified mailbox framework. The current mailbox framework expects
mbox_chan_received_data() to be called with data immediately as it
arrives. Remove the FIFO and pass the messages to the mailbox
framework directly as part of a threaded IRQ handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
It is much more clear to check if the hardware FIFO is full and return
EBUSY if true. This allows us to also remove one level of indention
from the core of this function. It also makes the similarities between
omap_mbox_chan_send_noirq() and omap_mbox_chan_send() more obvious.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
This function only checks if mbox_chan *chan is not NULL, but that cannot
be the case and if it was returning NULL which is not later checked
doesn't save us from this. The second check for chan->con_priv is
completely redundant as if it was NULL we would return NULL just the
same. Simply dereference con_priv directly and remove this function.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The driver stores a list of omap_mbox structs so it can later use it to
lookup the mailbox names in of_xlate. This same information is already
available in the mbox_controller passed into of_xlate. Simply use that
data and remove the extra allocation and storage of the omap_mbox list.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The mbox_controller struct is only needed in the probe function. Make
it a local variable instead of storing a copy in omap_mbox_device
to simplify that struct.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Currently the driver loops through all mailbox child nodes twice, once
to read in data from each node, and again to make use of this data.
Instead read the data and make use of it in one pass. This removes
the need for several temporary data structures and reduces the
complexity of this main loop in probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Use device life-cycle managed runtime enable function to simplify probe
and exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The driver currently creates a new device class "mbox". Then for each
mailbox adds a device to that class. This class provides no file
operations provided for any userspace users of this device class.
It may have been extended to be functional in our vendor tree at
some point, but that is not the case anymore, nor does it matter
for the upstream tree.
Remove this device class and related functions and variables.
This also allows us to switch to module_platform_driver() as
there is nothing left to do in module_init().
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The type of message sent using omap-mailbox is always u32. The definition
of mbox_msg_t is uintptr_t which is wrong as that type changes based on
the architecture (32bit vs 64bit). This type should have been defined as
u32. Instead of making that change here, simply remove the header usage
and fix the last couple users of the same in this driver.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The mbox_kfifo_size can be changed at runtime, the sanity
check on it's value should be done when it is used, not
only once at init time.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
This is only used internal to the driver, move it out of the
public header and into the driver file. While we are here,
this is not used as a bitwise, so drop that and make it a
simple enum type.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
This function is not used, remove this function.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
These function are not used, remove these here.
While here, remove the leading _ from the driver internal functions that
do the same thing as the functions removed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
If an input device declares too many capability bits then modalias
string for such device may become too long and not fit into uevent
buffer, resulting in failure of sending said uevent. This, in turn,
may prevent userspace from recognizing existence of such devices.
This is typically not a concern for real hardware devices as they have
limited number of keys, but happen with synthetic devices such as
ones created by xen-kbdfront driver, which creates devices as being
capable of delivering all possible keys, since it doesn't know what
keys the backend may produce.
To deal with such devices input core will attempt to trim key data,
in the hope that the rest of modalias string will fit in the given
buffer. When trimming key data it will indicate that it is not
complete by placing "+," sign, resulting in conversions like this:
old: k71,72,73,74,78,7A,7B,7C,7D,8E,9E,A4,AD,E0,E1,E4,F8,174,
new: k71,72,73,74,78,7A,7B,7C,+,
This should allow existing udev rules continue to work with existing
devices, and will also allow writing more complex rules that would
recognize trimmed modalias and check input device characteristics by
other means (for example by parsing KEY= data in uevent or parsing
input device sysfs attributes).
Note that the driver core may try adding more uevent environment
variables once input core is done adding its own, so when forming
modalias we can not use the entire available buffer, so we reduce
it by somewhat an arbitrary amount (96 bytes).
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Link: https://lore.kernel.org/r/ZjAWMQCJdrxZkvkB@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The bitops.h is for bit related operations. The aligned_byte_mask()
is about byte (or part of the machine word) operations, for which
we have a separate header, move the mentioned macro to wordpart.h
to consolidate similar operations.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Bitops API is the very basic, and it's widely used by the kernel. But
corresponding files are not maintained.
Bitmaps actively use bit operations, and big share of bitops material
already moves through the bitmap branch.
I would like to take a closer look to bitops.
This patch creates a BITOPS API record in the MAINTAINERS, and adds
Rasmus as a reviewer, and myself as a maintainer of those files.
CC: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The page-owner tracking code records stack traces during page allocation.
To do this, it must do a memory allocation for the stack information from
inside an existing memory allocation context. This internal allocation
must obey the high level caller allocation constraints to avoid generating
false positive warnings that have nothing to do with the code they are
instrumenting/tracking (e.g. through lockdep reclaim state tracking)
We also don't want recording stack traces to deplete emergency memory
reserves - debug code is useless if it creates new issues that can't be
replicated when the debug code is disabled.
Switch the stack tracking allocation masking to use gfp_nested_mask() to
address these issues. gfp_nested_mask() naturally strips GFP_ZONEMASK,
too, which greatly simplifies this code.
Link: https://lkml.kernel.org/r/20240430054604.4169568-4-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The stackdepot code is used by KASAN and lockdep for recoding stack
traces. Both of these track allocation context information, and so their
internal allocations must obey the caller allocation contexts to avoid
generating their own false positive warnings that have nothing to do with
the code they are instrumenting/tracking.
We also don't want recording stack traces to deplete emergency memory
reserves - debug code is useless if it creates new issues that can't be
replicated when the debug code is disabled.
Switch the stackdepot allocation masking to use gfp_nested_mask() to
address these issues. gfp_nested_mask() also strips GFP_ZONEMASK
naturally, so that greatly simplifies this code.
Link: https://lkml.kernel.org/r/20240430054604.4169568-3-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: fix nested allocation context filtering".
This patchset is the followup to the comment I made earlier today:
https://lore.kernel.org/linux-xfs/ZjAyIWUzDipofHFJ@dread.disaster.area/
Tl;dr: Memory allocations that are done inside the public memory
allocation API need to obey the reclaim recursion constraints placed on
the allocation by the original caller, including the "don't track
recursion for this allocation" case defined by __GFP_NOLOCKDEP.
These nested allocations are generally in debug code that is tracking
something about the allocation (kmemleak, KASAN, etc) and so are
allocating private kernel objects that only that debug system will use.
Neither the page-owner code nor the stack depot code get this right. They
also also clear GFP_ZONEMASK as a separate operation, which is completely
redundant because the constraint filter applied immediately after
guarantees that GFP_ZONEMASK bits are cleared.
kmemleak gets this filtering right. It preserves the allocation
constraints for deadlock prevention and clears all other context flags
whilst also ensuring that the nested allocation will fail quickly,
silently and without depleting emergency kernel reserves if there is no
memory available.
This can be made much more robust, immune to whack-a-mole games and the
code greatly simplified by lifting gfp_kmemleak_mask() to
include/linux/gfp.h and using that everywhere. Also document it so that
there is no excuse for not knowing about it when writing new debug code
that nests allocations.
Tested with lockdep, KASAN + page_owner=on and kmemleak=on over multiple
fstests runs with XFS.
This patch (of 3):
Any "internal" nested allocation done from within an allocation context
needs to obey the high level allocation gfp_mask constraints. This is
necessary for debug code like KASAN, kmemleak, lockdep, etc that allocate
memory for saving stack traces and other information during memory
allocation. If they don't obey things like __GFP_NOLOCKDEP or
__GFP_NOWARN, they produce false positive failure detections.
kmemleak gets this right by using gfp_kmemleak_mask() to pass through the
relevant context flags to the nested allocation to ensure that the
allocation follows the constraints of the caller context.
KASAN recently was foudn to be missing __GFP_NOLOCKDEP due to stack depot
allocations, and even more recently the page owner tracking code was also
found to be missing __GFP_NOLOCKDEP support.
We also don't wan't want KASAN or lockdep to drive the system into OOM
kill territory by exhausting emergency reserves. This is something that
kmemleak also gets right by adding (__GFP_NORETRY | __GFP_NOMEMALLOC |
__GFP_NOWARN) to the allocation mask.
Hence it is clear that we need to define a common nested allocation filter
mask for these sorts of third party nested allocations used in debug code.
So to start this process, lift gfp_kmemleak_mask() to gfp.h and rename it
to gfp_nested_mask(), and convert the kmemleak callers to use it.
Link: https://lkml.kernel.org/r/20240430054604.4169568-1-david@fromorbit.com
Link: https://lkml.kernel.org/r/20240430054604.4169568-2-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The implementation of writing a zero-fill block in
nilfs_finish_roll_forward() is not safe. The buffer is being cleared
without acquiring a lock or setting the uptodate flag, so theoretically,
between the time the buffer's data is cleared and the time it is written
back to the block device using sync_dirty_buffer(), that zero data can be
undone by concurrent block device reads.
Since this buffer points to a location that has been read from disk once,
the uptodate flag will most likely remain, but since it was obtained with
__getblk(), that is not guaranteed. In other words, this is exceptional,
and this function itself is not normally called (only once when mounting
after a specific pattern of unclean shutdown), so it is highly unlikely
that this will actually cause a problem.
Anyway, eliminate this potential race issue by protecting the clearing of
buffer data with a buffer lock and setting the buffer's uptodate flag
within the protected section.
Link: https://lkml.kernel.org/r/20240511002942.9608-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Android was seeing a compilation error because its C library does not
define LINE_MAX. Since LINE_MAX is only used to determine the size of
test_name[] and 1024 should be enough for the test name, use 1024 instead
of LINE_MAX.
Link: https://lkml.kernel.org/r/20240509053113.43462-3-tao1.su@linux.intel.com
Fixes: 38c957f07038 ("selftests: kselftest_harness: generate test name once")
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Bongsu Jeon <bongsu.jeon@samsung.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Edward Liaw <edliaw@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Selftests: Fix compilation warnings due to missing
_GNU_SOURCE definition", v2.
Since kselftest_harness.h introduces asprintf()[1], many selftests have
compilation warnings or errors due to missing _GNU_SOURCE definitions.
The issue stems from a lack of a LINE_MAX definition in Android (see
commit 38c957f07038), which is the reason why asprintf() was introduced.
We tried adding _GNU_SOURCE definitions to more selftests to fix, but
asprintf() may continue to cause problems, and since it is quite late in
the 6.9 cycle, we would like to revert 809216233555 first to provide
testing for forks[2].
[1] https://lore.kernel.org/all/20240411231954.62156-1-edliaw@google.com
[2] https://lore.kernel.org/linux-kselftest/ZjuA3aY_iHkjP7bQ@google.com
This patch (of 2):
This reverts commit 8092162335554c8ef5e7f50eff68aa9cfbdbf865.
asprintf() is declared in stdio.h when defining _GNU_SOURCE, but stdio.h
is so common that many files don't define _GNU_SOURCE before including
stdio.h, and defining _GNU_SOURCE after including stdio.h will no longer
take effect, which causes warnings or even errors during compilation in
many selftests.
Revert 'commit 809216233555 ("selftests/harness: remove use of LINE_MAX")'
as that came in quite late in the 6.9 cycle.
Link: https://lkml.kernel.org/r/20240509053113.43462-1-tao1.su@linux.intel.com
Link: https://lore.kernel.org/linux-kselftest/ZjuA3aY_iHkjP7bQ@google.com/
Link: https://lkml.kernel.org/r/20240509053113.43462-2-tao1.su@linux.intel.com
Fixes: 809216233555 ("selftests/harness: remove use of LINE_MAX")
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Bongsu Jeon <bongsu.jeon@samsung.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Edward Liaw <edliaw@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that ARCH_HAS_KERNEL_FPU_SUPPORT provides a common way to compile and
run floating-point code, this test is no longer x86-specific.
Link: https://lkml.kernel.org/r/20240329072441.591471-16-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This ensures no compiler-generated floating-point code can appear outside
kernel_fpu_{begin,end}() sections, and some architectures enforce this
separation.
Link: https://lkml.kernel.org/r/20240329072441.591471-15-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that all previously-supported architectures select
ARCH_HAS_KERNEL_FPU_SUPPORT, this code can depend on that symbol instead
of the existing list of architectures. It can also take advantage of the
common kernel-mode FPU API and method of adjusting CFLAGS.
Link: https://lkml.kernel.org/r/20240329072441.591471-14-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The compiler flags enable altivec, but that is not required; hard-float is
sufficient for the code to build and function.
Drop altivec from the compiler flags and adjust the enable/disable code to
only enable FPU use.
Link: https://lkml.kernel.org/r/20240329072441.591471-13-samuel.holland@sifive.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is motivated by the amdgpu DRM driver, which needs floating-point
code to support recent hardware. That code is not performance-critical,
so only provide a minimal non-preemptible implementation for now.
Support is limited to riscv64 because riscv32 requires runtime (libgcc)
assistance to convert between doubles and 64-bit integers.
Link: https://lkml.kernel.org/r/20240329072441.591471-12-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
x86 already provides kernel_fpu_begin() and kernel_fpu_end(), but in a
different header. Add a wrapper header, and export the CFLAGS adjustments
as found in lib/Makefile.
Link: https://lkml.kernel.org/r/20240329072441.591471-11-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PowerPC provides an equivalent to the common kernel-mode FPU API, but in a
different header and using different function names. The PowerPC API also
requires a non-preemptible context. Add a wrapper header, and export the
CFLAGS adjustments.
Link: https://lkml.kernel.org/r/20240329072441.591471-9-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
LoongArch already provides kernel_fpu_begin() and kernel_fpu_end() in
asm/fpu.h, so it only needs to add kernel_fpu_available() and export the
CFLAGS adjustments.
Link: https://lkml.kernel.org/r/20240329072441.591471-8-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that CC_FLAGS_FPU is exported and can be used anywhere in the source
tree, use it instead of duplicating the flags here.
Link: https://lkml.kernel.org/r/20240329072441.591471-7-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that CC_FLAGS_FPU is exported and can be used anywhere in the source
tree, use it instead of duplicating the flags here.
Link: https://lkml.kernel.org/r/20240329072441.591471-6-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
arm64 provides an equivalent to the common kernel-mode FPU API, but in a
different header and using different function names. Add a wrapper
header, and export CFLAGS adjustments as found in lib/raid6/Makefile.
Link: https://lkml.kernel.org/r/20240329072441.591471-5-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that CC_FLAGS_FPU is exported and can be used anywhere in the source
tree, use it instead of duplicating the flags here.
Link: https://lkml.kernel.org/r/20240329072441.591471-4-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ARM provides an equivalent to the common kernel-mode FPU API, but in a
different header and using different function names. Add a wrapper
header, and export CFLAGS adjustments as found in lib/raid6/Makefile.
[samuel.holland@sifive.com: ARM: do not select ARCH_HAS_KERNEL_FPU_SUPPORT]
Link: https://lkml.kernel.org/r/20240509013727.648600-1-samuel.holland@sifive.com
Link: https://lkml.kernel.org/r/20240329072441.591471-3-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several architectures provide an API to enable the FPU and run
floating-point SIMD code in kernel space. However, the function names,
header locations, and semantics are inconsistent across architectures, and
FPU support may be gated behind other Kconfig options.
provide a standard way for architectures to declare that kernel space
FPU support is available. Architectures selecting this option must
implement what is currently the most common API (kernel_fpu_begin() and
kernel_fpu_end(), plus a new function kernel_fpu_available()) and
provide the appropriate CFLAGS for compiling floating-point C code.
Link: https://lkml.kernel.org/r/20240329072441.591471-2-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Unified cross-architecture kernel-mode FPU API", v4.
This series unifies the kernel-mode FPU API across several architectures
by wrapping the existing functions (where needed) in consistently-named
functions placed in a consistent header location, with mostly the same
semantics: they can be called from preemptible or non-preemptible task
context, and are not assumed to be reentrant. Architectures are also
expected to provide CFLAGS adjustments for compiling FPU-dependent code.
For the moment, SIMD/vector units are out of scope for this common API.
This allows us to remove the ifdeffery and duplicated Makefile logic at
each FPU user. It then implements the common API on RISC-V, and converts
a couple of users to the new API: the AMDGPU DRM driver, and the FPU self
test.
The underlying goal of this series is to allow using newer AMD GPUs (e.g.
Navi) on RISC-V boards such as SiFive's HiFive Unmatched. Those GPUs need
CONFIG_DRM_AMD_DC_FP to initialize, which requires kernel-mode FPU
support.
This patch (of 15):
The include guard should match the filename, or it will conflict with
the newly-added asm/fpu.h.
Link: https://lkml.kernel.org/r/20240329072441.591471-1-samuel.holland@sifive.com
Link: https://lkml.kernel.org/r/20240329072441.591471-10-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: WANG Xuerui <git@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All known function cast warnings are now addressed, so the warning can be
enabled globally to catch new ones more quickly.
Link: https://lkml.kernel.org/r/20240415122037.1983124-6-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This warning option still produces output on gcc but is now clean when
building with clang, so enable it conditionally on the compiler for now.
As far as I can tell, the remaining warnings with gcc are the result of
analysing the code more deeply across inlining, while clang only does this
within a function.
Link: https://lore.kernel.org/lkml/20240326230511.GA2796782@dev-arch.thelio-3990X/
Link: https://lore.kernel.org/linux-patches/20231002-disable-wformat-truncation-overflow-non-kprintf-v1-1-35179205c8d9@kernel.org/
Link: https://lkml.kernel.org/r/20240415122037.1983124-5-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All known -Wrestrict warnings are addressed now, so don't disable the
warning any more.
Link: https://lkml.kernel.org/r/20240415122037.1983124-4-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is no point in turning individual options off and then on again, or
vice versa, as the last one always wins. Now that -Wextra always gets
passed first, remove all the redundant lines about warnings that are
implied by either -Wall or -Wextra, and keep only the last one that
disables it in some configurations.
This should not have any effect but keep the Makefile more readable and
the command line shorter.
Link: https://lkml.kernel.org/r/20240415122037.1983124-3-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kbuild: enable more warnings by default", v3.
All the warning fixes I sent for these warnings have been merged into
mainline or linux-next, so let's turn them on by default.
This patch (of 6):
The -Wextra option controls a number of different warnings that differ
slightly by compiler version. Some are useful in general, others are
better left at W=1 or higher. Based on earlier work, the ones that should
be disabled by default are left for the higher warning levels already, and
a lot of the useful ones have no remaining output when enabled.
Move the -Wextra option up into the set of default-enabled warnings and
just rely on the individual ones getting disabled as needed.
The -Wunused warning was always grouped with this, so turn it on by
default as well, except for the -Wunused-parameter warning that really has
no value at all for the kernel since many interfaces have intentionally
unused arguments.
Link: https://lkml.kernel.org/r/20240415122037.1983124-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20240415122037.1983124-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The connector is created by either this ADV7511 bridge driver or
any DRM device driver/previous bridge driver, so this ADV7511
bridge driver should not let the next bridge driver create connector.
If the next bridge is a HDMI connector, the next bridge driver
would fail to attach bridge from display_connector_attach() without
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.
Add that flag to drm_bridge_attach() function call in
adv7511_bridge_attach() to fix the issue.
This fixes the issue where the HDMI connector bridge fails to attach
to the previous ADV7535 bridge on i.MX8MP EVK platform:
[ 2.216442] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /hdmi-connector to encoder None-37: -22
[ 2.220675] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[ 2.226262] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@30800000/i2c@30a30000/hdmi@3d to encoder None-37: -22
[ 2.245204] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc@0/bus@32c00000/dsi@32e60000 to encoder None-37: -22
[ 2.256445] imx-lcdif 32e80000.display-controller: error -EINVAL: Failed to attach bridge for endpoint0
[ 2.265850] imx-lcdif 32e80000.display-controller: error -EINVAL: Cannot connect bridge
[ 2.274009] imx-lcdif 32e80000.display-controller: probe with driver imx-lcdif failed with error -22
Fixes: 14b3cdbd0e5b ("drm/bridge: adv7511: make it honour next bridge in DT")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Acked-by: Sui Jingfeng <suijingfeng@bosc.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513080243.3952292-1-victor.liu@nxp.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
"Mainly singleton patches, documented in their respective changelogs.
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo:
Clean up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb:
Fixes for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over
macros. The series is "codingstyle: avoid unused parameters for a
function-like macro""
* tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits)
fs/proc: fix softlockup in __read_vmcore
nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON()
scripts: checkpatch: check unused parameters for function-like macro
Documentation: coding-style: ask function-like macros to evaluate parameters
nilfs2: use __field_struct() for a bitwise field
selftests/kcmp: remove unused open mode
nilfs2: remove calls to folio_set_error() and folio_clear_error()
kernel/watchdog_perf.c: tidy up kerneldoc
watchdog: allow nmi watchdog to use raw perf event
watchdog: handle comma separated nmi_watchdog command line
nilfs2: make superblock data array index computation sparse friendly
squashfs: remove calls to set the folio error flag
squashfs: convert squashfs_symlink_read_folio to use folio APIs
scripts/gdb: fix detection of current CPU in KGDB
scripts/gdb: make get_thread_info accept pointers
scripts/gdb: fix parameter handling in $lx_per_cpu
scripts/gdb: fix failing KGDB detection during probe
kfifo: don't use "proxy" headers
media: stih-cec: add missing io.h
media: rc: add missing io.h
...
|
|
Pull bcachefs updates from Kent Overstreet:
- More safety fixes, primarily found by syzbot
- Run the upgrade/downgrade paths in nochnages mode. Nochanges mode is
primarily for testing fsck/recovery in dry run mode, so it shouldn't
change anything besides disabling writes and holding dirty metadata
in memory.
The idea here was to reduce the amount of activity if we can't write
anything out, so that bringing up a filesystem in "super ro" mode
would be more lilkely to work for data recovery - but norecovery is
the correct option for this.
- btree_trans->locked; we now track whether a btree_trans has any btree
nodes locked, and this is used for improved assertions related to
trans_unlock() and trans_relock(). We'll also be using it for
improving how we work with lockdep in the future: we don't want
lockdep to be tracking individual btree node locks because we take
too many for lockdep to track, and it's not necessary since we have a
cycle detector.
- Trigger improvements that are prep work for online fsck
- BTREE_TRIGGER_check_repair; this regularizes how we do some repair
work for extents that goes with running triggers in fsck, and fixes
some subtle issues with transaction restarts there.
- bch2_snapshot_equiv() has now been ripped out of fsck.c; snapshot
equivalence classes are for when snapshot deletion leaves behind
redundant snapshot nodes, but snapshot deletion now cleans this up
right away, so the abstraction doesn't need to leak.
- Improvements to how we resume writing to the journal in recovery. The
code for picking the new place to write when reading the journal is
greatly simplified and we also store the position in the superblock
for when we don't read the journal; this means that we preserve more
of the journal for list_journal debugging.
- Improvements to sysfs btree_cache and btree_node_cache, for debugging
memory reclaim.
- We now detect when we've blocked for 10 seconds on the allocator in
the write path and dump some useful info.
- Safety fixes for devices references: this is a big series that
changes almost all device lookups to properly check if the device
exists and take a reference to it.
Previously we assumed that if a bkey exists that references a device
then the device must exist, and this was enforced in .invalid
methods, but this was incorrect because it meant device removal
relied on accounting being correct to not leave keys pointing to
invalid devices, and that's not something we can assume.
Getting the "pointer to invalid device" checks out of our .invalid()
methods fixes some long standing device removal bugs; the only
outstanding bug with device removal now is a race between the discard
path and deleting alloc info, which should be easily fixed.
- The allocator now prefers not to expand the new
member_info.btree_allocated bitmap, meaning if repair ever requires
scanning for btree nodes (because of a corrupt interior nodes) we
won't have to scan the whole device(s).
- New coding style document, which among other things talks about the
correct usage of assertions
* tag 'bcachefs-2024-05-19' of https://evilpiepirate.org/git/bcachefs: (155 commits)
bcachefs: add no_invalid_checks flag
bcachefs: add counters for failed shrinker reclaim
bcachefs: Fix sb_field_downgrade validation
bcachefs: Plumb bch_validate_flags to sb_field_ops.validate()
bcachefs: s/bkey_invalid_flags/bch_validate_flags
bcachefs: fsync() should not return -EROFS
bcachefs: Invalid devices are now checked for by fsck, not .invalid methods
bcachefs: kill bch2_dev_bkey_exists() in bch2_check_fix_ptrs()
bcachefs: kill bch2_dev_bkey_exists() in bch2_read_endio()
bcachefs: bch2_dev_get_ioref() checks for device not present
bcachefs: bch2_dev_get_ioref2(); io_read.c
bcachefs: bch2_dev_get_ioref2(); debug.c
bcachefs: bch2_dev_get_ioref2(); journal_io.c
bcachefs: bch2_dev_get_ioref2(); io_write.c
bcachefs: bch2_dev_get_ioref2(); btree_io.c
bcachefs: bch2_dev_get_ioref2(); backpointers.c
bcachefs: bch2_dev_get_ioref2(); alloc_background.c
bcachefs: for_each_bset() declares loop iter
bcachefs: Move BCACHEFS_STATFS_MAGIC value to UAPI magic.h
bcachefs: Improve sysfs internal/btree_cache
...
|
|
Move the fallback and block incompatible checks
above, so that we dont unnecessarily split the blocks
and leaving the unmerged. This resolves the unnecessary
warn on's thrown during force_merge call.
v2:(Matthew)
- Move the fallback and block incompatible checks above
the contains check.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Fixes: 96950929eb23 ("drm/buddy: Implement tracking clear page feature")
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240517135015.17565-1-Arunpravin.PaneerSelvam@amd.com/
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517143305.17894-1-Arunpravin.PaneerSelvam@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Survive sparse die id's seen in Linux-6.9
- Handle clustered-uncore topology in new/upcoming hardware
- For non-root use, add ability to see software C-state counters
- Enable reading core and package hardware cstate via perf, and prefer
perf over the MSR driver access for these counters
* tag 'turbostat-for-Linux-6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.05.10
tools/power turbostat: Ignore pkg_cstate_limit when it is not available
tools/power turbostat: Fix order of strings in pkg_cstate_limit_strings
tools/power turbostat: Read Package-cstates via perf
tools/power turbostat: Read Core-cstates via perf
tools/power turbostat: Avoid possible memory corruption due to sparse topology IDs
tools/power turbostat: Add columns for clustered uncore frequency
tools/power turbostat: Enable non-privileged users to read sysfs counters
tools/power turbostat: Replace _Static_assert with BUILD_BUG_ON
tools/power turbostat: Add ARL-H support
tools/power turbostat: Enhance ARL/LNL support
tools/power turbostat: Survive sparse die_id
tools/power turbostat: Remember global max_die_id
tools/power turbostat: Harden probe_intel_uncore_frequency()
tools/power turbostat: Add "snapshot:" Makefile target
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Nine patches this cycle and they split into just three topics:
- Adopt coccinelle's recommendation to adopt str_plural()
- A set of seven patches to refactor kdb_read() to improve both code
clarity and its discipline with respect to fixed size buffers.
This isn't just a refactor. Between them these also fix a cursor
movement redraw problem and two buffer overflows (one latent and
one real, albeit difficult to tickle).
- Fix an NMI-safety problem when enqueuing kdb's keyboard reset code
I wrote eight of the nine patches in this collection so many thanks to
Doug Anderson for the reviews. The changes that affects
drivers/tty/serial is acked by Greg KH"
* tag 'kgdb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
serial: kgdboc: Fix NMI-safety problems from keyboard reset code
kdb: Simplify management of tmpbuffer in kdb_read()
kdb: Replace double memcpy() with memmove() in kdb_read()
kdb: Use format-specifiers rather than memset() for padding in kdb_read()
kdb: Merge identical case statements in kdb_read()
kdb: Fix console handling when editing and tab-completing commands
kdb: Use format-strings rather than '\0' injection in kdb_read()
kdb: Fix buffer overflow during tab-complete
kdb: Use str_plural() to fix Coccinelle warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix a NOP-patching bug that resulted in valid but suboptimal
NOP sequences in certain cases
- Fix build warnings related to fall-through control flow
* tag 'x86-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Use the correct length when optimizing NOPs
x86/boot: Address clang -Wimplicit-fallthrough in vsprintf()
x86/boot: Add a fallthrough annotation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a sched_balance_newidle setting bug
- Fix bug in the setting of /sys/fs/cgroup/test/cpu.max.burst
- Fix variable-shadowing build warning
- Extend sched-domains debug output
- Fix documentation
- Fix comments
* tag 'sched-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix incorrect initialization of the 'burst' parameter in cpu_max_write()
sched/fair: Remove stale FREQUENCY_UTIL comment
sched/fair: Fix initial util_avg calculation
docs: cgroup-v1: Clarify that domain levels are system-specific
sched/debug: Dump domains' level
sched/fair: Allow disabling sched_balance_newidle with sched_relax_domain_level
arch/topology: Fix variable naming to avoid shadowing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- Extend the x86 instruction decoder with APX and
other new instructions
- Misc cleanups
* tag 'perf-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/cstate: Remove unused 'struct perf_cstate_msr'
perf/x86/rapl: Rename 'maxdie' to nr_rapl_pmu and 'dieid' to rapl_pmu_idx
x86/insn: Add support for APX EVEX instructions to the opcode map
x86/insn: Add support for APX EVEX to the instruction decoder logic
x86/insn: x86/insn: Add support for REX2 prefix to the instruction decoder opcode map
x86/insn: Add support for REX2 prefix to the instruction decoder logic
x86/insn: Add misc new Intel instructions
x86/insn: Add VEX versions of VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS
x86/insn: Fix PUSH instruction in x86 instruction decoder opcode map
x86/insn: Add Key Locker instructions to the opcode map
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
1, Enable PSI tracking.
2, Enable IKCONFIG/IKHEADERS.
3, Enable Generic PHY driver.
4, Enable Motorcomm PHY driver.
5, Enable ORC stack unwinder.
6, Enable some squashfs options.
7, Enable some netfilter options.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Pull smb client fix from Steve French:
"An important fix to address recent netfs regression (data corruption)"
* tag '6.10-rc-smb-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix data corruption in read after invalidate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
- more folio conversion patches
- add support for FS_IOC_GETFSSYSFSPATH
- mballoc cleaups and add more kunit tests
- sysfs cleanups and bug fixes
- miscellaneous bug fixes and cleanups
* tag 'ext4_for_linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
ext4: fix error pointer dereference in ext4_mb_load_buddy_gfp()
jbd2: add prefix 'jbd2' for 'shrink_type'
jbd2: use shrink_type type instead of bool type for __jbd2_journal_clean_checkpoint_list()
ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super()
ext4: remove calls to to set/clear the folio error flag
ext4: propagate errors from ext4_sb_bread() in ext4_xattr_block_cache_find()
ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find()
jbd2: remove redundant assignement to variable err
ext4: remove the redundant folio_wait_stable()
ext4: fix potential unnitialized variable
ext4: convert ac_buddy_page to ac_buddy_folio
ext4: convert ac_bitmap_page to ac_bitmap_folio
ext4: convert ext4_mb_init_cache() to take a folio
ext4: convert bd_buddy_page to bd_buddy_folio
ext4: convert bd_bitmap_page to bd_bitmap_folio
ext4: open coding repeated check in next_linear_group
ext4: use correct criteria name instead stale integer number in comment
ext4: call ext4_mb_mark_free_simple to free continuous bits in found chunk
ext4: add test_mb_mark_used_cost to estimate cost of mb_mark_used
ext4: keep "prefetch_grp" and "nr" consistent
...
|
|
Pull nfsd updates from Chuck Lever:
"This is a light release containing mostly optimizations, code clean-
ups, and minor bug fixes. This development cycle has focused on non-
upstream kernel work:
1. Continuing to build upstream CI for NFSD, based on kdevops
2. Backporting NFSD filecache-related fixes to selected LTS kernels
One notable new feature in v6.10 NFSD is the addition of a new netlink
protocol dedicated to configuring NFSD. A new user space tool,
nfsdctl, is to be added to nfs-utils. Lots more to come here.
As always I am very grateful to NFSD contributors, reviewers, testers,
and bug reporters who participated during this cycle"
* tag 'nfsd-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (29 commits)
NFSD: Force all NFSv4.2 COPY requests to be synchronous
SUNRPC: Fix gss_free_in_token_pages()
NFS/knfsd: Remove the invalid NFS error 'NFSERR_OPNOTSUPP'
knfsd: LOOKUP can return an illegal error value
nfsd: set security label during create operations
NFSD: Add COPY status code to OFFLOAD_STATUS response
NFSD: Record status of async copy operation in struct nfsd4_copy
SUNRPC: Remove comment for sp_lock
NFSD: add listener-{set,get} netlink command
SUNRPC: add a new svc_find_listener helper
SUNRPC: introduce svc_xprt_create_from_sa utility routine
NFSD: add write_version to netlink command
NFSD: convert write_threads to netlink command
NFSD: allow callers to pass in scope string to nfsd_svc
NFSD: move nfsd_mutex handling into nfsd_svc callers
lockd: host: Remove unnecessary statements＇host = NULL;＇
nfsd: don't create nfsv4recoverydir in nfsdfs when not used.
nfsd: optimise recalculate_deny_mode() for a common case
nfsd: add tracepoint in mark_client_expired_locked
nfsd: new tracepoint for check_slot_seqid
...
|
