1st set of IIO new device support, features and cleanup for 6.6

New device support
* adi,ad8366
  - Add support for the HMC792 digital attenuator (mostly chip specific data)
* alwinner,sun20i-gpadc
  - New driver for the integrated ADC on a number of allwinner SoCs
    including dt-binding documentation.
* microchip,mcp4728
  - New driver for this quad channel DAC. Includes dt-bindings.
* miramems, da280
  - Add ID for DA217 accelerometer which is compatible with the da280.
* murata,irs-d200
  - New driver for this passive infrared sensor typically used for human
    detection. Includes bindings and a few pieces of new ABI to
    cover a case of needing to count a number of repeats of an event
    before reporting it.
* rohm,bu27008
  - Add initial support for the BU27010 RGB + flickering sensor to this
    driver. Substantial refactoring was needed to enable this.

Features
* adi,admv8818
  - Add mode that bypasses the input and output filters.
* amlogic,meson
  - Support control of the MUX on channel 7, exposed as multiple channels.
  - Support channel labels.
* sensirion,scd4x
  - Add pressure compensation. Controlled via an 'output' pressure channel.
* ti,lmp92040
  - Add IIO buffered supported (read via chrdev).
* vishay,vcnl4000
  - Add proximity interrupt support for vcnl4200.
  - Add proximity integration time control for vcnl4200.
  - Add illuminance integration time control for vcnl4040 and vcnl4200.
  - Add calibration bias, proximity and illuminance event period, and
    oversampling ratio control for vcnl4040 and vncl4200.

Cleanup and minor fixes
* core
  - Tidy up handling of set_trigger_state() callback return values
    to consistently assume no positive return values.
  - Use min() rather than min_t() in a case where types were clearly
    the same.
  - Drop some else statements that follow continue with a loop or
    a returns.
  - White space and comment format cleanup.
  - Use sysfs_match_string() helper to improve readability.
  - Use krealloc_array() to make it explicit a krealloc is for an array
    of structures, not just one.
* tools
  - Tidy up potential overflow in array index.
* tree wide
  - Fix up includes for DT related headers.
  - Drop some error prints in places where as similar error message
    is printed by the function being called.
  - Tidy up handling of return value from platform_get_irq() to no longer
    take into account 0 as a value that might be returned. Similar for
    fwnode_irq_get().
* adi,ad7192
  - Add missing error check and improved debug logging.
  - Use sysfs_emit_at() rather than open coded variant.
* adi,adis16475
  - Drop unused scan element enum entries.
  - Specify that a few more devices support burst32 mode.
* adi,admv1013
  - Enable all required regulators and document as required in the
    dt-binding.
* adi,admv1014
  - Make all regulators required in the dt-binding as the device needs
    them all enabled.
* adi,adxl313
  - Fix wrong enum values being used in the i2c_device_id table.
  - Use i2c_get_match_data() to reduce open coded handling of the
    various id tables.
* allwinner,gpadc
  - Make the kconfig text more specific to make space for separate drivers
    for other Allwinner devices.
* amlogic,meson
  - Drop unused timestamp channels as no buffer support.
  - Various minor reorganizations to enable addition of support channel 7
    MUX.
  - Initialize some default values to account for potential previous user
    since reboot.
* qcom,spmi-adc5
  - Add ADC5_GPIO2_100K_PU support to driver to line up with bindings.
* qcom,spmi-adc7
  - Use predefined channel ID definitions rather than values.
* invensense, common
  - Factor out the timestamp handling to a module used by both mpu6050 and
    icm42600.
* invensense,mpu6050
  - Read as many FIFO elements as possible in one bus access.
* men,s188
  - Drop redundant initialization of driver owner field.
* microchip,mcp4018 and mcp4531
  - Use i2c_get_match_data() instead of open coding. Includes making the
    data format the same for the i2c_device_id and firmware match
    tables.
* semtech,sx9310
  - dt-bindings: Add reference to IIO schema to provide the label property.
* semtech,sx9324
  - dt-bindings: Add reference to IIO schema to provide the label property.
* st,stm32-adc
  - Use devm_platform_get_and_ioremap_resource() instead of open coded
    version.
* st,stm-lptimer-trigger
  - Drop setting platform drvdata as it wasn't then used.
* ti,ads1015
  - Fix wrong dt binding description of ti,datarate for some devices.
* vishay,vcnl4200
  - Move to switch statements for channel type checking to make later
    additions simpler.
-----BEGIN PGP SIGNATURE-----
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=hTrR
-----END PGP SIGNATURE-----