Second set of new device support, cleanups and features for IIO in the 5.8 cycle

Usual mixed back but with a few subsystem wide or device type
wide cleanups.

New device support

* adis16475
  - New driver supporting adis16470, adis16475, adis16477, adis16465,
    adis16467, adis16500, adis16505 and adis16507.
    Includes some rework of the adis library to simplify using it
    for this new driver.
* ak8974
  - Add support for Alps hscdt008a. ID only. Related patches add support
    for scale.
* atlas-sensor
  - Add support for RTD-SM OEM temperature sensor.
* cm32181
  - Add support for CM3218 including support for SMBUS alert via
    ACPI resources.
* ltc2632
  - Add support for ltc2634-12/10/8 DACS including handling per
    device type numbers of channels.

Major Features

* cm32181
  - ACPI bindings including parsing CPM0 and CPM1 custom ACPI tables.
    Includes minor tidy ups and fixes.
* vcnl4000
  - Add event support
  - Add buffered data capture support
  - Add control of sampling frequency

Cleanups and minor fixes.

* core
  - Trivial rework of iio_device_alloc to use an early return and
    improve readability.
  - Precursors to addition of multiple buffer support. So far
    minor refactoring.
* subsystem wide
  - Use get_unaligned_be24 slightly improve readability over open
    coding it.
* adis drivers
  - Use iio_get_debugfs_dentry access function.
* bh1780, cm32181, cm3232, gp2ap02a00f, opt3001, st_uvis25, vl6180,
  dmard06, kxsd9
  - Drop use of of_match_ptr to allow ACPI based probing via PRP0001.
    Part of clear out of this to avoid cut and paste into new drivers.
* ad5592r, ad5593r
  - Fix typos
* ad5933
  - Use managed interfaces to automate error handling and remove.
* ak8974
  - Fix wrong number of 'real bits' for buffered data.
  - Refactor to pull measurement code out as separate function.
    bmp280
  - Fix lack of clamp on range during data capture.
* at91-sama5d2_adc
  - Handle unfinished conversions correctly.
  - Allow use of triggers other than it's own.
  - Reorganize buffer setup and tear down as part of long running
    subsystem wide rework.
* ccs811
  - Add DT binding docs and match table.
  - Support external reset and wakeup pins.
* hid-sensors
  - Reorganize buffer setup and tear down as part of long running
    subsystem wide rework.
* ltr501
  - Constify some structs.
* vcnl4000
  - Fix an endian issue by using explicit byte swapped i2c accessors.
-----BEGIN PGP SIGNATURE-----
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=mYqq
-----END PGP SIGNATURE-----