diff options
Diffstat (limited to 'include/linux/platform_data/cros_ec_commands.h')
| -rw-r--r-- | include/linux/platform_data/cros_ec_commands.h | 144 |
1 files changed, 99 insertions, 45 deletions
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index f1003de53d51ff..fe43096bac9c04 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -4019,60 +4019,52 @@ struct ec_response_i2c_passthru { } __ec_align1; /*****************************************************************************/ -/* Power button hang detect */ - +/* AP hang detect */ #define EC_CMD_HANG_DETECT 0x009F -/* Reasons to start hang detection timer */ -/* Power button pressed */ -#define EC_HANG_START_ON_POWER_PRESS BIT(0) - -/* Lid closed */ -#define EC_HANG_START_ON_LID_CLOSE BIT(1) - - /* Lid opened */ -#define EC_HANG_START_ON_LID_OPEN BIT(2) +#define EC_HANG_DETECT_MIN_TIMEOUT 5 +#define EC_HANG_DETECT_MAX_TIMEOUT 65535 -/* Start of AP S3->S0 transition (booting or resuming from suspend) */ -#define EC_HANG_START_ON_RESUME BIT(3) +/* EC hang detect commands */ +enum ec_hang_detect_cmds { + /* Reload AP hang detect timer. */ + EC_HANG_DETECT_CMD_RELOAD = 0x0, -/* Reasons to cancel hang detection */ + /* Stop AP hang detect timer. */ + EC_HANG_DETECT_CMD_CANCEL = 0x1, -/* Power button released */ -#define EC_HANG_STOP_ON_POWER_RELEASE BIT(8) - -/* Any host command from AP received */ -#define EC_HANG_STOP_ON_HOST_COMMAND BIT(9) - -/* Stop on end of AP S0->S3 transition (suspending or shutting down) */ -#define EC_HANG_STOP_ON_SUSPEND BIT(10) + /* Configure watchdog with given reboot timeout and + * cancel currently running AP hang detect timer. + */ + EC_HANG_DETECT_CMD_SET_TIMEOUT = 0x2, -/* - * If this flag is set, all the other fields are ignored, and the hang detect - * timer is started. This provides the AP a way to start the hang timer - * without reconfiguring any of the other hang detect settings. Note that - * you must previously have configured the timeouts. - */ -#define EC_HANG_START_NOW BIT(30) + /* Get last hang status - whether the AP boot was clear or not */ + EC_HANG_DETECT_CMD_GET_STATUS = 0x3, -/* - * If this flag is set, all the other fields are ignored (including - * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer - * without reconfiguring any of the other hang detect settings. - */ -#define EC_HANG_STOP_NOW BIT(31) + /* Clear last hang status. Called when AP is rebooting/shutting down + * gracefully. + */ + EC_HANG_DETECT_CMD_CLEAR_STATUS = 0x4 +}; struct ec_params_hang_detect { - /* Flags; see EC_HANG_* */ - uint32_t flags; - - /* Timeout in msec before generating host event, if enabled */ - uint16_t host_event_timeout_msec; + uint16_t command; /* enum ec_hang_detect_cmds */ + /* Timeout in seconds before generating reboot */ + uint16_t reboot_timeout_sec; +} __ec_align2; - /* Timeout in msec before generating warm reboot, if enabled */ - uint16_t warm_reboot_timeout_msec; -} __ec_align4; +/* Status codes that describe whether AP has boot normally or the hang has been + * detected and EC has reset AP + */ +enum ec_hang_detect_status { + EC_HANG_DETECT_AP_BOOT_NORMAL = 0x0, + EC_HANG_DETECT_AP_BOOT_EC_WDT = 0x1, + EC_HANG_DETECT_AP_BOOT_COUNT, +}; +struct ec_response_hang_detect { + uint8_t status; /* enum ec_hang_detect_status */ +} __ec_align1; /*****************************************************************************/ /* Commands for battery charging */ @@ -4494,8 +4486,20 @@ struct ec_response_i2c_passthru_protect { * These commands are for sending and receiving message via HDMI CEC */ +#define EC_CEC_MAX_PORTS 16 + #define MAX_CEC_MSG_LEN 16 +/* + * Helper macros for packing/unpacking cec_events. + * bits[27:0] : bitmask of events from enum mkbp_cec_event + * bits[31:28]: port number + */ +#define EC_MKBP_EVENT_CEC_PACK(events, port) \ + (((events) & GENMASK(27, 0)) | (((port) & 0xf) << 28)) +#define EC_MKBP_EVENT_CEC_GET_EVENTS(event) ((event) & GENMASK(27, 0)) +#define EC_MKBP_EVENT_CEC_GET_PORT(event) (((event) >> 28) & 0xf) + /* CEC message from the AP to be written on the CEC bus */ #define EC_CMD_CEC_WRITE_MSG 0x00B8 @@ -4507,19 +4511,54 @@ struct ec_params_cec_write { uint8_t msg[MAX_CEC_MSG_LEN]; } __ec_align1; +/** + * struct ec_params_cec_write_v1 - Message to write to the CEC bus + * @port: CEC port to write the message on + * @msg_len: length of msg in bytes + * @msg: message content to write to the CEC bus + */ +struct ec_params_cec_write_v1 { + uint8_t port; + uint8_t msg_len; + uint8_t msg[MAX_CEC_MSG_LEN]; +} __ec_align1; + +/* CEC message read from a CEC bus reported back to the AP */ +#define EC_CMD_CEC_READ_MSG 0x00B9 + +/** + * struct ec_params_cec_read - Read a message from the CEC bus + * @port: CEC port to read a message on + */ +struct ec_params_cec_read { + uint8_t port; +} __ec_align1; + +/** + * struct ec_response_cec_read - Message read from the CEC bus + * @msg_len: length of msg in bytes + * @msg: message content read from the CEC bus + */ +struct ec_response_cec_read { + uint8_t msg_len; + uint8_t msg[MAX_CEC_MSG_LEN]; +} __ec_align1; + /* Set various CEC parameters */ #define EC_CMD_CEC_SET 0x00BA /** * struct ec_params_cec_set - CEC parameters set * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + * @port: CEC port to set the parameter on * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC * or 1 to enable CEC functionality, in case cmd is * CEC_CMD_LOGICAL_ADDRESS, this field encodes the requested logical * address between 0 and 15 or 0xff to unregister */ struct ec_params_cec_set { - uint8_t cmd; /* enum cec_command */ + uint8_t cmd : 4; /* enum cec_command */ + uint8_t port : 4; uint8_t val; } __ec_align1; @@ -4529,9 +4568,11 @@ struct ec_params_cec_set { /** * struct ec_params_cec_get - CEC parameters get * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + * @port: CEC port to get the parameter on */ struct ec_params_cec_get { - uint8_t cmd; /* enum cec_command */ + uint8_t cmd : 4; /* enum cec_command */ + uint8_t port : 4; } __ec_align1; /** @@ -4545,6 +4586,17 @@ struct ec_response_cec_get { uint8_t val; } __ec_align1; +/* Get the number of CEC ports */ +#define EC_CMD_CEC_PORT_COUNT 0x00C1 + +/** + * struct ec_response_cec_port_count - CEC port count response + * @port_count: number of CEC ports + */ +struct ec_response_cec_port_count { + uint8_t port_count; +} __ec_align1; + /* CEC parameters command */ enum cec_command { /* CEC reading, writing and events enable */ @@ -4559,6 +4611,8 @@ enum mkbp_cec_event { EC_MKBP_CEC_SEND_OK = BIT(0), /* Outgoing message was not acknowledged */ EC_MKBP_CEC_SEND_FAILED = BIT(1), + /* Incoming message can be read out by AP */ + EC_MKBP_CEC_HAVE_DATA = BIT(2), }; /*****************************************************************************/ |