Age | Commit message (Collapse) | Author | Files | Lines |
|
for testing in linux-next
|
|
Use atomic_long_try_cmpxchg instead of
atomic_long_cmpxchg (*ptr, old, new) == old in atomic_long_inc_below.
x86 CMPXCHG instruction returns success in ZF flag, so this change saves
a compare after cmpxchg (and related move instruction in front of cmpxchg).
Also, atomic_long_try_cmpxchg implicitly assigns old *ptr value to "old"
when cmpxchg fails, enabling further code simplifications.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/20221017144049.3404-3-ubizjak@gmail.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
The type of u argument of atomic_long_inc_below should be long
to avoid unwanted truncation to int.
Fixes: f9c82a4ea89c ("Increase size of ucounts to atomic_long_t")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lkml.kernel.org/r/20221017144049.3404-2-ubizjak@gmail.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
|
|
Pull vfs fix from Al Viro:
"Amir's copy_file_range() fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: fix copy_file_range() averts filesystem freeze protection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.1-rc7 that resolve some reported
problems:
- cdnsp driver fixes for reported problems
- dwc3 fixes for some small reported problems
- uvc gadget driver fix for reported regression
All of these have been in linux-next with no reported problems"
* tag 'usb-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1
usb: dwc3: gadget: Clear ep descriptor last
usb: dwc3: exynos: Fix remove() function
usb: cdnsp: Fix issue with Clear Feature Halt Endpoint
usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer
usb: gadget: uvc: also use try_format in set_format
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 6.1-rc7, they include:
- build warning fix for the vdso when using new versions of grep
- iio driver fixes for reported issues
- small nvmem driver fixes
- fpga Kconfig fix
- interconnect dt binding fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lib/vdso: use "grep -E" instead of "egrep"
nvmem: lan9662-otp: Change return type of lan9662_otp_wait_flag_clear()
nvmem: rmem: Fix return value check in rmem_read()
fpga: m10bmc-sec: Fix kconfig dependencies
dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
iio: adc: aspeed: Remove the trim valid dts property.
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
iio: light: rpr0521: add missing Kconfig dependencies
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
iio: health: afe4403: Fix oob read in afe4403_read_raw
iio: light: apds9960: fix wrong register for gesture gain
dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Return the proper timer register width (31 bits) for a 32-bit signed
register in order to avoid a timer interrupt storm on ARM XGene-1
hardware running in NO_HZ mode
* tag 'timers_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Handle different output of readelf on different distros running
ppc64le which confuses faddr2line's function offsets conversion
* tag 'objtool_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
scripts/faddr2line: Fix regression in name resolution on ppc64le
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- ioremap: mask out the bits which are not part of the physical address
*after* the size computation is done to prevent any hypothetical
ioremap failures
- Change the MSR save/restore functionality during suspend to rely on
flags denoting that the related MSRs are actually supported vs
reading them and assuming they are (an Atom one allows reading but
not writing, thus breaking this scheme at resume time)
- prevent IV reuse in the AES-GCM communication scheme between SNP
guests and the AMD secure processor
* tag 'x86_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioremap: Fix page aligned size calculation in __ioremap_caller()
x86/pm: Add enumeration check before spec MSRs save/restore setup
x86/tsx: Add a feature bit for TSX control MSR support
virt/sev-guest: Prevent IV reuse in the SNP guest driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
"Two more fixes to the perf sigtrap handling:
- output the address in the sample only when it has been requested
- handle the case where user-only events can hit in kernel and thus
upset the sigtrap sanity checking"
* tag 'perf_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Consider OS filter fail
perf: Fixup SIGTRAP and sample_flags interaction
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for Xen emulation. While nobody should be enabling it in the
kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
- Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a
use-after-free when it disables virtualization extensions. While
downgrading the panic to a WARN is quite easy, the full fix is a
bit more laborious; there are also tests. This is the bulk of the
pull request.
- Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
- Obey changes to the kvm.halt_poll_ns module parameter in VMs not
using KVM_CAP_HALT_POLL, restoring behavior from before the
introduction of the capability"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Update gfn_to_pfn_cache khva when it moves within the same page
KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0
KVM: x86/xen: Validate port number in SCHEDOP_poll
KVM: x86/mmu: Fix race condition in direct_page_fault
KVM: x86: remove exit_int_info warning in svm_handle_exit
KVM: selftests: add svm part to triple_fault_test
KVM: x86: allow L1 to not intercept triple fault
kvm: selftests: add svm nested shutdown test
KVM: selftests: move idt_entry to header
KVM: x86: forcibly leave nested mode on vCPU reset
KVM: x86: add kvm_leave_nested
KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use
KVM: x86: nSVM: leave nested mode on vCPU free
KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL
KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling
KVM: Cap vcpu->halt_poll_ns before halting rather than after
|
|
Pull cifs fixes from Steve French:
"Two small cifs/smb3 client fixes:
- an unlock missing in an error path in copychunk_range found by
xfstest 476
- a fix for a use after free in a debug code path"
* tag '6.1-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix missing unlock in cifs_file_copychunk_range()
cifs: Use after free in debug code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CC_HAS_ASM_GOTO_TIED_OUTPUT test in Kconfig
- Fix noisy "No such file or directory" message when
KBUILD_BUILD_VERSION is passed
- Include rust/ in source tarballs
- Fix missing FORCE for ARCH=nios2 builds
* tag 'kbuild-fixes-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
nios2: add FORCE for vmlinuz.gz
scripts: add rust in scripts/Makefile.package
kbuild: fix "cat: .version: No such file or directory"
init/Kconfig: fix CC_HAS_ASM_GOTO_TIED_OUTPUT test with dash
|
|
Add FORCE to placate a warning from make:
arch/nios2/boot/Makefile:24: FORCE prerequisite is missing
Fixes: 2fc8483fdcde ("nios2: Build infrastructure")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix rare data corruption on READ operations
* tag 'nfsd-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix reads with a non-zero offset that don't end on a page boundary
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- rk817: Two error handling fixes
- ip5xxx: fix inter overflow in current calculation
- ab8500: fix thermal zone probing
* tag 'for-v6.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: ab8500: Defer thermal zone probe
power: supply: ip5xxx: Fix integer overflow in current_now calculation
power: supply: rk817: Change rk817_chg_cur_to_reg to int
power: supply: rk817: check correct variable
|
|
Pull block fixes from Jens Axboe:
- A few fixes for s390 sads (Stefan, Colin)
- Ensure that ublk doesn't reorder requests, as that can be problematic
on devices that need specific ordering (Ming)
- Fix a queue reference leak in disk allocation handling (Christoph)
* tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux:
ublk_drv: don't forward io commands in reserve order
s390/dasd: fix possible buffer overflow in copy_pair_show
s390/dasd: fix no record found for raw_track_access
s390/dasd: increase printing of debug data payload
s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid"
blk-mq: fix queue reference leak on blk_mq_alloc_disk_for_queue failure
|
|
Pull io_uring fixes from Jens Axboe:
- A few poll related fixes. One fixing a race condition between poll
cancelation and trigger, and one making the overflow handling a bit
more robust (Lin, Pavel)
- Fix an fput() for error handling in the direct file table (Lin)
- Fix for a regression introduced in this cycle, where we don't always
get TIF_NOTIFY_SIGNAL cleared appropriately (me)
* tag 'io_uring-6.1-2022-11-25' of git://git.kernel.dk/linux:
io_uring: clear TIF_NOTIFY_SIGNAL if set and task_work not available
io_uring/poll: fix poll_refs race with cancelation
io_uring/filetable: fix file reference underflow
io_uring: make poll refs more robust
io_uring: cmpxchg for poll arm refs release
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Fix a race between zonefs module initialization of sysfs attribute
directory and mounting a drive (from Xiaoxu).
- Fix active zone accounting in the rare case of an IO error due to a
zone transition to offline or read-only state (from me).
* tag 'zonefs-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Fix active zone accounting
zonefs: Fix race between modprobe and mount
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"This is more changes than I'd like this late although the diffstat is
still fairly small, I kept on holding off as new fixes came in to give
things time to soak in -next but should probably have tagged and sent
an additional pull request earlier.
There's some relatively large fixes to the twl6030 driver to fix
issues with the TWL6032 variant which resulted from some work on the
core TWL6030 driver, a couple of fixes for error handling paths
(mostly in the core), and a nice stability fix for the sgl51000 driver
that's been pulled out of a BSP"
* tag 'regulator-fix-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: twl6030: fix get status of twl6032 regulators
regulator: twl6030: re-add TWL6032_SUBCLASS
regulator: slg51000: Wait after asserting CS pin
regulator: core: fix UAF in destroy_regulator()
regulator: rt5759: fix OOB in validate_desc()
regulator: core: fix kobject release warning and memory leak in regulator_register()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix a regression in nowait + buffered write
- in zoned mode fix endianness when comparing super block generation
- locking and lockdep fixes:
- fix potential sleeping under spinlock when setting qgroup limit
- lockdep warning fixes when btrfs_path is freed after copy_to_user
- do not modify log tree while holding a leaf from fs tree locked
- fix freeing of sysfs files of static features on error
- use kv.alloc for zone map allocation as a fallback to avoid warnings
due to high order allocation
- send, avoid unaligned encoded writes when attempting to clone range
* tag 'for-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs: normalize the error handling branch in btrfs_init_sysfs()
btrfs: do not modify log tree while holding a leaf from fs tree locked
btrfs: use kvcalloc in btrfs_get_dev_zone_info
btrfs: qgroup: fix sleep from invalid context bug in btrfs_qgroup_inherit()
btrfs: send: avoid unaligned encoded writes when attempting to clone range
btrfs: zoned: fix missing endianness conversion in sb_write_pointer
btrfs: free btrfs_path before copying subvol info to userspace
btrfs: free btrfs_path before copying fspath to userspace
btrfs: free btrfs_path before copying inodes to userspace
btrfs: free btrfs_path before copying root refs to userspace
btrfs: fix assertion failure and blocking during nowait buffered write
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert a recent change in the schedutil cpufreq governor that
had not been expected to make any functional difference, but turned
out to introduce a performance regression, fix an initialization issue
in the amd-pstate driver and make it actually replace the venerable
ACPI cpufreq driver on the supported systems by default.
Specifics:
- Revert a recent schedutil cpufreq governor change that introduced a
performace regression on Pixel 6 (Sam Wu)
- Fix amd-pstate driver initialization after running the kernel via
kexec (Wyes Karny)
- Turn amd-pstate into a built-in driver which allows it to take
precedence over acpi-cpufreq by default on supported systems and
amend it with a mechanism to disable this behavior (Perry Yuan)
- Update amd-pstate documentation in accordance with the other
changes made to it (Perry Yuan)"
* tag 'pm-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: add amd-pstate kernel command line options
Documentation: amd-pstate: add driver working mode introduction
cpufreq: amd-pstate: add amd-pstate driver parameter for mode selection
cpufreq: amd-pstate: change amd-pstate driver to be built-in type
cpufreq: amd-pstate: cpufreq: amd-pstate: reset MSR_AMD_PERF_CTL register at init
Revert "cpufreq: schedutil: Move max CPU capacity to sugov_policy"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix size of incorrectly increased from four to eight bytes TOD field
of crash dump save area. As result in case of kdump NT_S390_TODPREG
ELF notes section contains correct value and "detected read beyond
size of field" compiler warning goes away.
- Fix memory leak in cryptographic Adjunct Processors (AP) module on
initialization failure path.
- Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and Alexander
Gordeev <agordeev@linux.ibm.com> as S390 memory management
maintainers. Also rename the S390 section to S390 ARCHITECTURE to be
a bit more precise.
* tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add S390 MM section
s390/crashdump: fix TOD programmable field size
s390/ap: fix memory leak in ap_init_qci_info()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix IRTE allocation in Hyper-V PCI controller (Dexuan Cui)
- Fix handling of SCSI srb_status and capacity change events (Michael
Kelley)
- Restore VP assist page after CPU offlining and onlining (Vitaly
Kuznetsov)
- Fix some memory leak issues in VMBus (Yang Yingliang)
* tag 'hyperv-fixes-signed-20221125' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register()
Drivers: hv: vmbus: fix double free in the error path of vmbus_add_channel_work()
PCI: hv: Only reuse existing IRTE allocation for Multi-MSI
scsi: storvsc: Fix handling of srb_status and capacity change events
x86/hyperv: Restore VP assist page after cpu offlining/onlining
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"24 MM and non-MM hotfixes. 8 marked cc:stable and 16 for post-6.0
issues.
There have been a lot of hotfixes this cycle, and this is quite a
large batch given how far we are into the -rc cycle. Presumably a
reflection of the unusually large amount of MM material which went
into 6.1-rc1"
* tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
test_kprobes: fix implicit declaration error of test_kprobes
nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
mm/cgroup/reclaim: fix dirty pages throttling on cgroup v1
mm: fix unexpected changes to {failslab|fail_page_alloc}.attr
swapfile: fix soft lockup in scan_swap_map_slots
hugetlb: fix __prep_compound_gigantic_page page flag setting
kfence: fix stack trace pruning
proc/meminfo: fix spacing in SecPageTables
mm: multi-gen LRU: retry folios written back while isolated
mailmap: update email address for Satya Priya
mm/migrate_device: return number of migrating pages in args->cpages
kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible
MAINTAINERS: update Alex Hung's email address
mailmap: update Alex Hung's email address
mm: mmap: fix documentation for vma_mas_szero
mm/damon/sysfs-schemes: skip stats update if the scheme directory is removed
mm/memory: return vm_fault_t result from migrate_to_ram() callback
mm: correctly charge compressed memory to its memcg
ipc/shm: call underlying open/close vm_ops
gcov: clang: fix the buffer overflow issue
...
|
|
Pull vfs fixes from Al Viro:
"A couple of fixes, one of them for this cycle regression..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: vfs_tmpfile: ensure O_EXCL flag is enforced
fs: use acquire ordering in __fget_light()
|
|
With how task_work is added and signaled, we can have TIF_NOTIFY_SIGNAL
set and no task_work pending as it got run in a previous loop. Treat
TIF_NOTIFY_SIGNAL like get_signal(), always clear it if set regardless
of whether or not task_work is pending to run.
Cc: stable@vger.kernel.org
Fixes: 46a525e199e4 ("io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few more last-minute fixes for 6.1 that have been gathered in the
last week; nothing looks too worrisome, mostly device-specific small
fixes, including the ABI fix for ASoC SOF"
* tag 'sound-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: soc-pcm: Add NULL check in BE reparenting
ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event
ASoC: SOF: dai: move AMD_HS to end of list to restore backwards-compatibility
ASoC: max98373: Add checks for devm_kcalloc
ASoC: rt711-sdca: fix the latency time of clock stop prepare state machine transitions
ASoC: soc-pcm: Don't zero TDM masks in __soc_pcm_open()
ASoC: sgtl5000: Reset the CHIP_CLK_CTRL reg on remove
ASoC: hdac_hda: fix hda pcm buffer overflow issue
ASoC: stm32: i2s: remove irqf_oneshot flag
ASoC: wm8962: Wait for updated value of WM8962_CLOCKING1 register
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, amdgpu has not quite settled down.
Most of the changes are small, and the non-amdgpu ones are all fine.
There are a bunch of DP MST DSC fixes that fix some issues introduced
in a previous larger MST rework.
The biggest one is mainly propagating some error values properly
instead of bool returns, and I think it just looks large but doesn't
really change anything too much, except propagating errors that are
required to avoid deadlocks. I've gone over it and a few others and
they've had some decent testing over the last few weeks.
Summary:
amdgpu:
- amdgpu gang submit fix
- DCN 3.1.4 fixes
- DP MST DSC deadlock fixes
- HMM userptr fixes
- Fix Aldebaran CU occupancy reporting
- GFX11 fixes
- PSP suspend/resume fix
- DCE12 KASAN fix
- DCN 3.2.x fixes
- Rotated cursor fix
- SMU 13.x fix
- DELL platform suspend/resume fixes
- VCN4 SR-IOV fix
- Display regression fix for polled connectors
i915:
- Fix GVT KVM reference count handling
- Never purge busy TTM objects
- Fix warn in intel_display_power_*_domain() functions
dma-buf:
- Use dma_fence_unwrap_for_each when importing sync files
- Fix race in dma_heap_add()
fbcon:
- Fix use of uninitialized memory in logo"
* tag 'drm-fixes-2022-11-25' of git://anongit.freedesktop.org/drm/drm: (30 commits)
drm/amdgpu/vcn: re-use original vcn0 doorbell value
drm/amdgpu: Partially revert "drm/amdgpu: update drm_display_info correctly when the edid is read"
drm/amd/display: No display after resume from WB/CB
drm/amdgpu: fix use-after-free during gpu recovery
drm/amd/pm: update driver if header for smu_13_0_7
drm/amd/display: Fix rotated cursor offset calculation
drm/amd/display: Use new num clk levels struct for max mclk index
drm/amd/display: Avoid setting pixel rate divider to N/A
drm/amd/display: Use viewport height for subvp mall allocation size
drm/amd/display: Update soc bounding box for dcn32/dcn321
drm/amd/dc/dce120: Fix audio register mapping, stop triggering KASAN
drm/amdgpu/psp: don't free PSP buffers on suspend
fbcon: Use kzalloc() in fbcon_prepare_logo()
dma-buf: fix racing conflict of dma_heap_add()
drm/amd/amdgpu: reserve vm invalidation engine for firmware
drm/amdgpu: Enable Aldebaran devices to report CU Occupancy
drm/amdgpu: fix userptr HMM range handling v2
drm/amdgpu: always register an MMU notifier for userptr
drm/amdgpu/dm/mst: Fix uninitialized var in pre_compute_mst_dsc_configs_for_state()
drm/amdgpu/dm/dp_mst: Don't grab mst_mgr->lock when computing DSC state
...
|
|
There is an interesting race condition of poll_refs which could result
in a NULL pointer dereference. The crash trace is like:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 30781 Comm: syz-executor.2 Not tainted 6.0.0-g493ffd6605b2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:io_poll_remove_entry io_uring/poll.c:154 [inline]
RIP: 0010:io_poll_remove_entries+0x171/0x5b4 io_uring/poll.c:190
Code: ...
RSP: 0018:ffff88810dfefba0 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000040000
RDX: ffffc900030c4000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 0000000000000008 R08: ffffffff9764d3dd R09: fffffbfff3836781
R10: fffffbfff3836781 R11: 0000000000000000 R12: 1ffff11003422d60
R13: ffff88801a116b04 R14: ffff88801a116ac0 R15: dffffc0000000000
FS: 00007f9c07497700(0000) GS:ffff88811a600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffb5c00ea98 CR3: 0000000105680005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
io_apoll_task_func+0x3f/0xa0 io_uring/poll.c:299
handle_tw_list io_uring/io_uring.c:1037 [inline]
tctx_task_work+0x37e/0x4f0 io_uring/io_uring.c:1090
task_work_run+0x13a/0x1b0 kernel/task_work.c:177
get_signal+0x2402/0x25a0 kernel/signal.c:2635
arch_do_signal_or_restart+0x3b/0x660 arch/x86/kernel/signal.c:869
exit_to_user_mode_loop kernel/entry/common.c:166 [inline]
exit_to_user_mode_prepare+0xc2/0x160 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:283 [inline]
syscall_exit_to_user_mode+0x58/0x160 kernel/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause for this is a tiny overlooking in
io_poll_check_events() when cocurrently run with poll cancel routine
io_poll_cancel_req().
The interleaving to trigger use-after-free:
CPU0 | CPU1
|
io_apoll_task_func() | io_poll_cancel_req()
io_poll_check_events() |
// do while first loop |
v = atomic_read(...) |
// v = poll_refs = 1 |
... | io_poll_mark_cancelled()
| atomic_or()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
|
atomic_sub_return(...) |
// poll_refs = IO_POLL_CANCEL_FLAG |
// loop continue |
|
| io_poll_execute()
| io_poll_get_ownership()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
| // gets the ownership
v = atomic_read(...) |
// poll_refs not change |
|
if (v & IO_POLL_CANCEL_FLAG) |
return -ECANCELED; |
// io_poll_check_events return |
// will go into |
// io_req_complete_failed() free req |
|
| io_apoll_task_func()
| // also go into
io_req_complete_failed()
And the interleaving to trigger the kernel WARNING:
CPU0 | CPU1
|
io_apoll_task_func() | io_poll_cancel_req()
io_poll_check_events() |
// do while first loop |
v = atomic_read(...) |
// v = poll_refs = 1 |
... | io_poll_mark_cancelled()
| atomic_or()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
|
atomic_sub_return(...) |
// poll_refs = IO_POLL_CANCEL_FLAG |
// loop continue |
|
v = atomic_read(...) |
// v = IO_POLL_CANCEL_FLAG |
| io_poll_execute()
| io_poll_get_ownership()
| // poll_refs =
IO_POLL_CANCEL_FLAG | 1
| // gets the ownership
|
WARN_ON_ONCE(!(v & IO_POLL_REF_MASK))) |
// v & IO_POLL_REF_MASK = 0 WARN |
|
| io_apoll_task_func()
| // also go into
io_req_complete_failed()
By looking up the source code and communicating with Pavel, the
implementation of this atomic poll refs should continue the loop of
io_poll_check_events() just to avoid somewhere else to grab the
ownership. Therefore, this patch simply adds another AND operation to
make sure the loop will stop if it finds the poll_refs is exactly equal
to IO_POLL_CANCEL_FLAG. Since io_poll_cancel_req() grabs ownership and
will finally make its way to io_req_complete_failed(), the req will
be reclaimed as expected.
Fixes: aa43477b0402 ("io_uring: poll rework")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: tweak description and code style]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is an interesting reference bug when -ENOMEM occurs in calling of
io_install_fixed_file(). KASan report like below:
[ 14.057131] ==================================================================
[ 14.059161] BUG: KASAN: use-after-free in unix_get_socket+0x10/0x90
[ 14.060975] Read of size 8 at addr ffff88800b09cf20 by task kworker/u8:2/45
[ 14.062684]
[ 14.062768] CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted 6.1.0-rc4 #1
[ 14.063099] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 14.063666] Workqueue: events_unbound io_ring_exit_work
[ 14.063936] Call Trace:
[ 14.064065] <TASK>
[ 14.064175] dump_stack_lvl+0x34/0x48
[ 14.064360] print_report+0x172/0x475
[ 14.064547] ? _raw_spin_lock_irq+0x83/0xe0
[ 14.064758] ? __virt_addr_valid+0xef/0x170
[ 14.064975] ? unix_get_socket+0x10/0x90
[ 14.065167] kasan_report+0xad/0x130
[ 14.065353] ? unix_get_socket+0x10/0x90
[ 14.065553] unix_get_socket+0x10/0x90
[ 14.065744] __io_sqe_files_unregister+0x87/0x1e0
[ 14.065989] ? io_rsrc_refs_drop+0x1c/0xd0
[ 14.066199] io_ring_exit_work+0x388/0x6a5
[ 14.066410] ? io_uring_try_cancel_requests+0x5bf/0x5bf
[ 14.066674] ? try_to_wake_up+0xdb/0x910
[ 14.066873] ? virt_to_head_page+0xbe/0xbe
[ 14.067080] ? __schedule+0x574/0xd20
[ 14.067273] ? read_word_at_a_time+0xe/0x20
[ 14.067492] ? strscpy+0xb5/0x190
[ 14.067665] process_one_work+0x423/0x710
[ 14.067879] worker_thread+0x2a2/0x6f0
[ 14.068073] ? process_one_work+0x710/0x710
[ 14.068284] kthread+0x163/0x1a0
[ 14.068454] ? kthread_complete_and_exit+0x20/0x20
[ 14.068697] ret_from_fork+0x22/0x30
[ 14.068886] </TASK>
[ 14.069000]
[ 14.069088] Allocated by task 289:
[ 14.069269] kasan_save_stack+0x1e/0x40
[ 14.069463] kasan_set_track+0x21/0x30
[ 14.069652] __kasan_slab_alloc+0x58/0x70
[ 14.069899] kmem_cache_alloc+0xc5/0x200
[ 14.070100] __alloc_file+0x20/0x160
[ 14.070283] alloc_empty_file+0x3b/0xc0
[ 14.070479] path_openat+0xc3/0x1770
[ 14.070689] do_filp_open+0x150/0x270
[ 14.070888] do_sys_openat2+0x113/0x270
[ 14.071081] __x64_sys_openat+0xc8/0x140
[ 14.071283] do_syscall_64+0x3b/0x90
[ 14.071466] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 14.071791]
[ 14.071874] Freed by task 0:
[ 14.072027] kasan_save_stack+0x1e/0x40
[ 14.072224] kasan_set_track+0x21/0x30
[ 14.072415] kasan_save_free_info+0x2a/0x50
[ 14.072627] __kasan_slab_free+0x106/0x190
[ 14.072858] kmem_cache_free+0x98/0x340
[ 14.073075] rcu_core+0x427/0xe50
[ 14.073249] __do_softirq+0x110/0x3cd
[ 14.073440]
[ 14.073523] Last potentially related work creation:
[ 14.073801] kasan_save_stack+0x1e/0x40
[ 14.074017] __kasan_record_aux_stack+0x97/0xb0
[ 14.074264] call_rcu+0x41/0x550
[ 14.074436] task_work_run+0xf4/0x170
[ 14.074619] exit_to_user_mode_prepare+0x113/0x120
[ 14.074858] syscall_exit_to_user_mode+0x1d/0x40
[ 14.075092] do_syscall_64+0x48/0x90
[ 14.075272] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 14.075529]
[ 14.075612] Second to last potentially related work creation:
[ 14.075900] kasan_save_stack+0x1e/0x40
[ 14.076098] __kasan_record_aux_stack+0x97/0xb0
[ 14.076325] task_work_add+0x72/0x1b0
[ 14.076512] fput+0x65/0xc0
[ 14.076657] filp_close+0x8e/0xa0
[ 14.076825] __x64_sys_close+0x15/0x50
[ 14.077019] do_syscall_64+0x3b/0x90
[ 14.077199] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 14.077448]
[ 14.077530] The buggy address belongs to the object at ffff88800b09cf00
[ 14.077530] which belongs to the cache filp of size 232
[ 14.078105] The buggy address is located 32 bytes inside of
[ 14.078105] 232-byte region [ffff88800b09cf00, ffff88800b09cfe8)
[ 14.078685]
[ 14.078771] The buggy address belongs to the physical page:
[ 14.079046] page:000000001bd520e7 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800b09de00 pfn:0xb09c
[ 14.079575] head:000000001bd520e7 order:1 compound_mapcount:0 compound_pincount:0
[ 14.079946] flags: 0x100000000010200(slab|head|node=0|zone=1)
[ 14.080244] raw: 0100000000010200 0000000000000000 dead000000000001 ffff88800493cc80
[ 14.080629] raw: ffff88800b09de00 0000000080190018 00000001ffffffff 0000000000000000
[ 14.081016] page dumped because: kasan: bad access detected
[ 14.081293]
[ 14.081376] Memory state around the buggy address:
[ 14.081618] ffff88800b09ce00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 14.081974] ffff88800b09ce80: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
[ 14.082336] >ffff88800b09cf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 14.082690] ^
[ 14.082909] ffff88800b09cf80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[ 14.083266] ffff88800b09d000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
[ 14.083622] ==================================================================
The actual tracing of this bug is shown below:
commit 8c71fe750215 ("io_uring: ensure fput() called correspondingly
when direct install fails") adds an additional fput() in
io_fixed_fd_install() when io_file_bitmap_get() returns error values. In
that case, the routine will never make it to io_install_fixed_file() due
to an early return.
static int io_fixed_fd_install(...)
{
if (alloc_slot) {
...
ret = io_file_bitmap_get(ctx);
if (unlikely(ret < 0)) {
io_ring_submit_unlock(ctx, issue_flags);
fput(file);
return ret;
}
...
}
...
ret = io_install_fixed_file(req, file, issue_flags, file_slot);
...
}
In the above scenario, the reference is okay as io_fixed_fd_install()
ensures the fput() is called when something bad happens, either via
bitmap or via inner io_install_fixed_file().
However, the commit 61c1b44a21d7 ("io_uring: fix deadlock on iowq file
slot alloc") breaks the balance because it places fput() into the common
path for both io_file_bitmap_get() and io_install_fixed_file(). Since
io_install_fixed_file() handles the fput() itself, the reference
underflow come across then.
There are some extra commits make the current code into
io_fixed_fd_install() -> __io_fixed_fd_install() ->
io_install_fixed_file()
However, the fact that there is an extra fput() is called if
io_install_fixed_file() calls fput(). Traversing through the code, I
find that the existing two callers to __io_fixed_fd_install():
io_fixed_fd_install() and io_msg_send_fd() have fput() when handling
error return, this patch simply removes the fput() in
io_install_fixed_file() to fix the bug.
Fixes: 61c1b44a21d7 ("io_uring: fix deadlock on iowq file slot alloc")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/be4ba4b.5d44.184a0a406a4.Coremail.linma@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
poll_refs carry two functions, the first is ownership over the request.
The second is notifying the io_poll_check_events() that there was an
event but wake up couldn't grab the ownership, so io_poll_check_events()
should retry.
We want to make poll_refs more robust against overflows. Instead of
always incrementing it, which covers two purposes with one atomic, check
if poll_refs is elevated enough and if so set a retry flag without
attempts to grab ownership. The gap between the bias check and following
atomics may seem racy, but we don't need it to be strict. Moreover there
might only be maximum 4 parallel updates: by the first and the second
poll entries, __io_arm_poll_handler() and cancellation. From those four,
only poll wake ups may be executed multiple times, but they're protected
by a spin.
Cc: stable@vger.kernel.org
Reported-by: Lin Ma <linma@zju.edu.cn>
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c762bc31f8683b3270f3587691348a7119ef9c9d.1668963050.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace atomically substracting the ownership reference at the end of
arming a poll with a cmpxchg. We try to release ownership by setting 0
assuming that poll_refs didn't change while we were arming. If it did
change, we keep the ownership and use it to queue a tw, which is fully
capable to process all events and (even tolerates spurious wake ups).
It's a bit more elegant as we reduce races b/w setting the cancellation
flag and getting refs with this release, and with that we don't have to
worry about any kinds of underflows. It's not the fastest path for
polling. The performance difference b/w cmpxchg and atomic dec is
usually negligible and it's not the fastest path.
Cc: stable@vger.kernel.org
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0c95251624397ea6def568ff040cad2d7926fd51.1668963050.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a file zone transitions to the offline or readonly state from an
active state, we must clear the zone active flag and decrement the
active seq file counter. Do so in zonefs_account_active() using the new
zonefs inode flags ZONEFS_ZONE_OFFLINE and ZONEFS_ZONE_READONLY. These
flags are set if necessary in zonefs_check_zone_condition() based on the
result of report zones operation after an IO error.
Fixes: 87c9ce3ffec9 ("zonefs: Add active seq file accounting")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
|
|
Commit 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs
copies") removed fallback to generic_copy_file_range() for cross-fs
cases inside vfs_copy_file_range().
To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to
generic_copy_file_range() was added in nfsd and ksmbd code, but that
call is missing sb_start_write(), fsnotify hooks and more.
Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that
will take care of the fallback, but that code would be subtle and we got
vfs_copy_file_range() logic wrong too many times already.
Instead, add a flag to explicitly request vfs_copy_file_range() to
perform only generic_copy_file_range() and let nfsd and ksmbd use this
flag only in the fallback path.
This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code
paths to reduce the risk of further regressions.
Fixes: 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs copies")
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.1-2022-11-23:
amdgpu:
- DCN 3.1.4 fixes
- DP MST DSC deadlock fixes
- HMM userptr fixes
- Fix Aldebaran CU occupancy reporting
- GFX11 fixes
- PSP suspend/resume fix
- DCE12 KASAN fix
- DCN 3.2.x fixes
- Rotated cursor fix
- SMU 13.x fix
- DELL platform suspend/resume fixes
- VCN4 SR-IOV fix
- Display regression fix for polled connectors
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123143453.8977-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix GVT KVM reference count handling (Sean Christopherson)
- Never purge busy TTM objects (Matthew Auld)
- Fix warn in intel_display_power_*_domain() functions (Imre Deak)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y38u44hb1LZfZC+M@tursulin-desk
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.1-rc7:
- Another amdgpu gang submit fix.
- Use dma_fence_unwrap_for_each when importing sync files.
- Fix race in dma_heap_add().
- Fix use of uninitialized memory in logo.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a5721505-4823-98ef-7d6f-0ea478221391@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter and xfrm.
Current release - regressions:
- dccp/tcp: fix bhash2 issues related to WARN_ON() in
inet_csk_get_port()
- l2tp: don't sleep and disable BH under writer-side sk_callback_lock
- eth: ice: fix handling of burst tx timestamps
Current release - new code bugs:
- xfrm: squelch kernel warning in case XFRM encap type is not
available
- eth: mlx5e: fix possible race condition in macsec extended packet
number update routine
Previous releases - regressions:
- neigh: decrement the family specific qlen
- netfilter: fix ipset regression
- rxrpc: fix race between conn bundle lookup and bundle removal
[ZDI-CAN-15975]
- eth: iavf: do not restart tx queues after reset task failure
- eth: nfp: add port from netdev validation for EEPROM access
- eth: mtk_eth_soc: fix potential memory leak in mtk_rx_alloc()
Previous releases - always broken:
- tipc: set con sock in tipc_conn_alloc
- nfc:
- fix potential memory leaks
- fix incorrect sizing calculations in EVT_TRANSACTION
- eth: octeontx2-af: fix pci device refcount leak
- eth: bonding: fix ICMPv6 header handling when receiving IPv6
messages
- eth: prestera: add missing unregister_netdev() in
prestera_port_create()
- eth: tsnep: fix rotten packets
Misc:
- usb: qmi_wwan: add support for LARA-L6"
* tag 'net-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: thunderx: Fix the ACPI memory leak
octeontx2-af: Fix reference count issue in rvu_sdp_init()
net: altera_tse: release phylink resources in tse_shutdown()
virtio_net: Fix probe failed when modprobe virtio_net
net: wwan: t7xx: Fix the ACPI memory leak
octeontx2-pf: Add check for devm_kcalloc
net: enetc: preserve TX ring priority across reconfiguration
net: marvell: prestera: add missing unregister_netdev() in prestera_port_create()
nfc: st-nci: fix incorrect sizing calculations in EVT_TRANSACTION
nfc: st-nci: fix memory leaks in EVT_TRANSACTION
nfc: st-nci: fix incorrect validating logic in EVT_TRANSACTION
Documentation: networking: Update generic_netlink_howto URL
net/cdc_ncm: Fix multicast RX support for CDC NCM devices with ZLP
net: usb: qmi_wwan: add u-blox 0x1342 composition
l2tp: Don't sleep and disable BH under writer-side sk_callback_lock
net: dm9051: Fix missing dev_kfree_skb() in dm9051_loop_rx()
arcnet: fix potential memory leak in com20020_probe()
ipv4: Fix error return code in fib_table_insert()
net: ethernet: mtk_eth_soc: fix memory leak in error path
net: ethernet: mtk_eth_soc: fix resource leak in error path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a bunch of late fixes that just came in, in particular a
longer series for Rockchips devicetree files, but most of those just
address cosmetic errors that were found during the binding validation.
There are a couple of code changes:
- A regression fix to the IXP42x PCI bus
- A fix for a memory leak on optee, and another one for mach-mxs
- Two fixes for the sunxi rsb bus driver, to address problems with
the shutdown logic
The rest are small but important devicetree fixes for a number of
individual boards, addressing issues across all platforms:
- arm global timer on older rockchip SoCs is unstable and needs to be
disabled in favor of a more reliable clocksource
- Corrections to fix bluetooth, mmc, and networking on a few Rockchip
boards
- at91/sam9g20ek UDC needs a pin controller config change
- an omap board runs into mmc probe errors because of regulator nodes
in the wrong place
- imx8mp-evk has a minor inaccuracy with its pin config, but without
user visible impact
- The Allwinner H6 Hantro G2 video decoder needs an IOMMU reference
to prevent the driver from crashing"
* tag 'soc-fixes-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
bus: ixp4xx: Don't touch bit 7 on IXP42x
ARM: dts: imx6q-prti6q: Fix ref/tcxo-clock-frequency properties
arm64: dts: imx8mp-evk: correct pcie pad settings
ARM: mxs: fix memory leak in mxs_machine_init()
ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl
tee: optee: fix possible memory leak in optee_register_device()
arm64: dts: allwinner: h6: Add IOMMU reference to Hantro G2
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
bus: sunxi-rsb: Support atomic transfers
bus: sunxi-rsb: Remove the shutdown callback
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt
ARM: dts: am335x-pcm-953: Define fixed regulators in root node
ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name
arm64: dts: rockchip: fix ir-receiver node names
ARM: dts: rockchip: fix ir-receiver node names
arm64: dts: rockchip: fix adc-keys sub node names
ARM: dts: rockchip: fix adc-keys sub node names
arm: dts: rockchip: remove clock-frequency from rtc
arm: dts: rockchip: fix node name for hym8563 rtc
...
|
|
Pull ARM fixes from Russell King:
"Two fixes for 6.1:
- fix stacktraces for tracepoint events in Thumb2 mode
- fix for noMMU ZERO_PAGE() implementation"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation
ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix two build warnings, a copy_thread() bug, two page table
manipulation bugs, and some trivial cleanups"
* tag 'loongarch-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN/LoongArch: Fix wrong description of FPRs Note
LoongArch: Fix unsigned comparison with less than zero
LoongArch: Set _PAGE_DIRTY only if _PAGE_MODIFIED is set in {pmd,pte}_mkwrite()
LoongArch: Set _PAGE_DIRTY only if _PAGE_WRITE is set in {pmd,pte}_mkdirty()
LoongArch: Clear FPU/SIMD thread info flags for kernel thread
LoongArch: SMP: Change prefix from loongson3 to loongson
LoongArch: Combine acpi_boot_table_init() and acpi_boot_init()
LoongArch: Makefile: Use "grep -E" instead of "egrep"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a regression in the lazytime code that was introduced in v6.1-rc1,
and a use-after-free that can be triggered by a maliciously corrupted
file system"
* tag 'ext4_for_linus_stable2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs: do not update freeing inode i_io_list
ext4: fix use-after-free in ext4_ext_shift_extents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Disabling of the unreliable arm-global-timer on earliest
Rockchip SoCs, due to its frequency being bound to the
changing cpu clock.
* tag 'v6.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: disable arm_global_timer on rk3066 and rk3188
|
|
Alexander Gordeev and Gerald Schaefer are covering the whole s390 specific
memory management code. Reflect that by adding a new S390 MM section to
MAINTAINERS.
Also rename the S390 section to S390 ARCHITECTURE to be a bit more precise.
Acked-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The size of the TOD programmable field was incorrectly increased from
four to eight bytes with commit 1a2c5840acf9 ("s390/dump: cleanup CPU
save area handling").
This leads to an elf notes section NT_S390_TODPREG which has a size of
eight instead of four bytes in case of kdump, however even worse is
that the contents is incorrect: it is supposed to contain only the
contents of the TOD programmable field, but in fact contains a mix of
the TOD programmable field (32 bit upper bits) and parts of the CPU
timer register (lower 32 bits).
Fix this by simply changing the size of the todpreg field within the
save area structure. This will implicitly also fix the size of the
corresponding elf notes sections.
This also gets rid of this compile time warning:
in function ‘fortify_memcpy_chk’,
inlined from ‘save_area_add_regs’ at arch/s390/kernel/crash_dump.c:99:2:
./include/linux/fortify-string.h:413:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field
(2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 1a2c5840acf9 ("s390/dump: cleanup CPU save area handling")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The ACPI buffer memory (string.pointer) should be freed as the buffer is
not used after returning from bgx_acpi_match_id(), free it to prevent
memory leak.
Fixes: 46b903a01c05 ("net, thunder, bgx: Add support to get MAC address from ACPI.")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20221123082237.1220521-1-liaoyu15@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some PMUs (notably the traditional hardware kind) have boundary issues
with the OS filter. Specifically, it is possible for
perf_event_attr::exclude_kernel=1 events to trigger in-kernel due to
SKID or errata.
This can upset the sigtrap logic some and trigger the WARN.
However, if this invalid sample is the first we must not loose the
SIGTRAP, OTOH if it is the second, it must not override the
pending_addr with a (possibly) invalid one.
Fixes: ca6c21327c6a ("perf: Fix missing SIGTRAPs")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lkml.kernel.org/r/Y3hDYiXwRnJr8RYG@xpf.sh.intel.com
|
|
The perf_event_attr::sigtrap functionality relies on data->addr being
set. However commit 7b0846301531 ("perf: Use sample_flags for addr")
changed this to only initialize data->addr when not 0.
Fixes: 7b0846301531 ("perf: Use sample_flags for addr")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Y3426b4OimE%2FI5po%40hirez.programming.kicks-ass.net
|
|
pci_get_device() will decrease the reference count for the *from*
parameter. So we don't need to call put_device() to decrease the
reference. Let's remove the put_device() in the loop and only decrease
the reference count of the returned 'pdev' for the last loop because it
will not be passed to pci_get_device() as input parameter. We don't need
to check if 'pdev' is NULL because it is already checked inside
pci_dev_put(). Also add pci_dev_put() for the error path.
Fixes: fe1939bb2340 ("octeontx2-af: Add SDP interface support")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Link: https://lore.kernel.org/r/20221123065919.31499-1-wangxiongfeng2@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Call phylink_disconnect_phy() in tse_shutdown() to release the
resources occupied by phylink_of_phy_connect() in the tse_open().
Fixes: fef2998203e1 ("net: altera: tse: convert to phylink")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221123011617.332302-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When doing the following test steps, an error was found:
step 1: modprobe virtio_net succeeded
# modprobe virtio_net <-- OK
step 2: fault injection in register_netdevice()
# modprobe -r virtio_net <-- OK
# ...
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 0 PID: 3521 Comm: modprobe
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
Call Trace:
<TASK>
...
should_failslab+0xa/0x20
...
dev_set_name+0xc0/0x100
netdev_register_kobject+0xc2/0x340
register_netdevice+0xbb9/0x1320
virtnet_probe+0x1d72/0x2658 [virtio_net]
...
</TASK>
virtio_net: probe of virtio0 failed with error -22
step 3: modprobe virtio_net failed
# modprobe virtio_net <-- failed
virtio_net: probe of virtio0 failed with error -2
The root cause of the problem is that the queues are not
disable on the error handling path when register_netdevice()
fails in virtnet_probe(), resulting in an error "-ENOENT"
returned in the next modprobe call in setup_vq().
virtio_pci_modern_device uses virtqueues to send or
receive message, and "queue_enable" records whether the
queues are available. In vp_modern_find_vqs(), all queues
will be selected and activated, but once queues are enabled
there is no way to go back except reset.
Fix it by reset virtio device on error handling path. This
makes error handling follow the same order as normal device
cleanup in virtnet_remove() which does: unregister, destroy
failover, then reset. And that flow is better tested than
error handling so we can be reasonably sure it works well.
Fixes: 024655555021 ("virtio_net: fix use after free on allocation failure")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20221122150046.3910638-1-lizetao1@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ACPI buffer memory (buffer.pointer) should be freed as the
buffer is not used after acpi_evaluate_object(), free it to
prevent memory leak.
Fixes: 13e920d93e37 ("net: wwan: t7xx: Add core components")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1669119580-28977-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As the devm_kcalloc may return NULL pointer,
it should be better to add check for the return
value, as same as the others.
Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20221122055449.31247-1-jiasheng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the blamed commit, a rudimentary reallocation procedure for RX buffer
descriptors was implemented, for the situation when their format changes
between normal (no PTP) and extended (PTP).
enetc_hwtstamp_set() calls enetc_close() and enetc_open() in a sequence,
and this sequence loses information which was previously configured in
the TX BDR Mode Register, specifically via the enetc_set_bdr_prio() call.
The TX ring priority is configured by tc-mqprio and tc-taprio, and
affects important things for TSN such as the TX time of packets. The
issue manifests itself most visibly by the fact that isochron --txtime
reports premature packet transmissions when PTP is first enabled on an
enetc interface.
Save the TX ring priority in a new field in struct enetc_bdr (occupies a
2 byte hole on arm64) in order to make this survive a ring reconfiguration.
Fixes: 434cebabd3a2 ("enetc: Add dynamic allocation of extended Rx BD rings")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20221122130936.1704151-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
prestera_port_create()
If prestera_port_sfp_bind() fails, unregister_netdev() should be called
in error handling path.
Compile tested only.
Fixes: 52323ef75414 ("net: marvell: prestera: add phylink support")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/1669115432-36841-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Martin Faltesek says:
====================
nfc: st-nci: Restructure validating logic in EVT_TRANSACTION
These are the same 3 patches that were applied in st21nfca here:
https://lore.kernel.org/netdev/20220607025729.1673212-1-mfaltesek@google.com
with a couple minor differences.
st-nci has nearly identical code to that of st21nfca for EVT_TRANSACTION,
except that there are two extra validation checks that are not present
in the st-nci code.
The 3/3 patch as coded for st21nfca pulls those checks in, bringing both
drivers into parity.
====================
Link: https://lore.kernel.org/r/20221122004246.4186422-1-mfaltesek@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The transaction buffer is allocated by using the size of the packet buf,
and subtracting two which seems intended to remove the two tags which are
not present in the target structure. This calculation leads to under
counting memory because of differences between the packet contents and the
target structure. The aid_len field is a u8 in the packet, but a u32 in
the structure, resulting in at least 3 bytes always being under counted.
Further, the aid data is a variable length field in the packet, but fixed
in the structure, so if this field is less than the max, the difference is
added to the under counting.
To fix, perform validation checks progressively to safely reach the
next field, to determine the size of both buffers and verify both tags.
Once all validation checks pass, allocate the buffer and copy the data.
This eliminates freeing memory on the error path, as validation checks are
moved ahead of memory allocation.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Error path does not free previously allocated memory. Add devm_kfree() to
the failure path.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered. The fix is to change && to ||.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Either ublk_can_use_task_work() is true or not, io commands are
forwarded to ublk server in reverse order, since llist_add() is
always to add one element to the head of the list.
Even though block layer doesn't guarantee request dispatch order,
requests should be sent to hardware in the sequence order generated
from io scheduler, which usually considers the request's LBA, and
order is often important for HDD.
So forward io commands in the sequence made from io scheduler by
aligning task work with current io_uring command's batch handling,
and it has been observed that both can get similar performance data
if IORING_SETUP_COOP_TASKRUN is set from ublk server.
Reported-by: Andreas Hindborg <andreas.hindborg@wdc.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221121155645.396272-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
ipsec 2022-11-23
1) Fix "disable_policy" on ipv4 early demuxP Packets after
the initial packet in a flow might be incorectly dropped
on early demux if there are no matching policies.
From Eyal Birger.
2) Fix a kernel warning in case XFRM encap type is not
available. From Eyal Birger.
3) Fix ESN wrap around for GSO to avoid a double usage of a
sequence number. From Christian Langrock.
4) Fix a send_acquire race with pfkey_register.
From Herbert Xu.
5) Fix a list corruption panic in __xfrm_state_delete().
Thomas Jarosch.
6) Fix an unchecked return value in xfrm6_init().
Chen Zhongjin.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Fix ignored return value in xfrm6_init()
xfrm: Fix oops in __xfrm_state_delete()
af_key: Fix send_acquire race with pfkey_register
xfrm: replay: Fix ESN wrap around for GSO
xfrm: lwtunnel: squelch kernel warning in case XFRM encap type is not available
xfrm: fix "disable_policy" on ipv4 early demux
====================
Link: https://lore.kernel.org/r/20221123093117.434274-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix regression in ipset hash:ip with IPv4 range, from Vishwanath Pai.
This is fixing up a bug introduced in the 6.0 release.
2) The "netfilter: ipset: enforce documented limit to prevent allocating
huge memory" patch contained a wrong condition which makes impossible to
add up to 64 clashing elements to a hash:net,iface type of set while it
is the documented feature of the set type. The patch fixes the condition
and thus makes possible to add the elements while keeps preventing
allocating huge memory, from Jozsef Kadlecsik. This has been broken
for several releases.
3) Missing locking when updating the flow block list which might lead
a reader to crash. This has been broken since the introduction of the
flowtable hardware offload support.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable_offload: add missing locking
netfilter: ipset: restore allowing 64 clashing elements in hash:net,iface
netfilter: ipset: regression in ip_set_hash_ip.c
====================
Link: https://lore.kernel.org/r/20221122212814.63177-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The documentation refers to invalid web page under www.linuxfoundation.org
The patch refers to a working URL under wiki.linuxfoundation.org
Signed-off-by: Nir Levy <bhr166@gmail.com>
Link: https://lore.kernel.org/all/20221120220630.7443-1-bhr166@gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add rust argument at TAR_CONTENT in
scripts/Makefile.package script with alphabetical order.
Signed-off-by: Paran Lee <p4ranlee@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since commit 2df8220cc511 ("kbuild: build init/built-in.a just once"),
the .version file is not touched at all when KBUILD_BUILD_VERSION is
given.
If KBUILD_BUILD_VERSION is specified and the .version file is missing
(for example right after 'make mrproper'), "No such file or director"
is shown. Even if the .version exists, it is irrelevant to the version
of the current build.
$ make -j$(nproc) KBUILD_BUILD_VERSION=100 mrproper defconfig all
[ snip ]
BUILD arch/x86/boot/bzImage
cat: .version: No such file or directory
Kernel: arch/x86/boot/bzImage is ready (#)
Show KBUILD_BUILD_VERSION if it is given.
Fixes: 2df8220cc511 ("kbuild: build init/built-in.a just once")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
This brings in a few important fixes for Xen emulation.
While nobody should be enabling it, the bug effectively
allows userspace to read arbitrary memory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In the case where a GPC is refreshed to a different location within the
same page, we didn't bother to update it. Mostly we don't need to, but
since the ->khva field also includes the offset within the page, that
does have to be updated.
Fixes: 3ba2c95ea180 ("KVM: Do not incorporate page offset into gfn=>pfn cache user address")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are almost no hypercalls which are valid from CPL > 0, and definitely
none which are handled by the kernel.
Fixes: 2fd6df2f2b47 ("KVM: x86/xen: intercept EVTCHNOP_send from guests")
Reported-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We shouldn't allow guests to poll on arbitrary port numbers off the end
of the event channel table.
Fixes: 1a65105a5aba ("KVM: x86/xen: handle PV spinlocks slowpath")
[dwmw2: my bug though; the original version did check the validity as a
side-effect of an idr_find() which I ripped out in refactoring.]
Reported-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
make_mmu_pages_available() must be called with mmu_lock held for write.
However, if the TDP MMU is used, it will be called with mmu_lock held for
read.
This function does nothing unless shadow pages are used, so there is no
race unless nested TDP is used.
Since nested TDP uses shadow pages, old shadow pages may be zapped by this
function even when the TDP MMU is enabled.
Since shadow pages are never allocated by kvm_tdp_mmu_map(), a race
condition can be avoided by not calling make_mmu_pages_available() if the
TDP MMU is currently in use.
I encountered this when repeatedly starting and stopping nested VM.
It can be artificially caused by allocating a large number of nested TDP
SPTEs.
For example, the following BUG and general protection fault are caused in
the host kernel.
pte_list_remove: 00000000cd54fc10 many->many
------------[ cut here ]------------
kernel BUG at arch/x86/kvm/mmu/mmu.c:963!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:pte_list_remove.cold+0x16/0x48 [kvm]
Call Trace:
<TASK>
drop_spte+0xe0/0x180 [kvm]
mmu_page_zap_pte+0x4f/0x140 [kvm]
__kvm_mmu_prepare_zap_page+0x62/0x3e0 [kvm]
kvm_mmu_zap_oldest_mmu_pages+0x7d/0xf0 [kvm]
direct_page_fault+0x3cb/0x9b0 [kvm]
kvm_tdp_page_fault+0x2c/0xa0 [kvm]
kvm_mmu_page_fault+0x207/0x930 [kvm]
npf_interception+0x47/0xb0 [kvm_amd]
svm_invoke_exit_handler+0x13c/0x1a0 [kvm_amd]
svm_handle_exit+0xfc/0x2c0 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0xa79/0x1780 [kvm]
kvm_vcpu_ioctl+0x29b/0x6f0 [kvm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:kvm_mmu_commit_zap_page.part.0+0x4b/0xe0 [kvm]
Call Trace:
<TASK>
kvm_mmu_zap_oldest_mmu_pages+0xae/0xf0 [kvm]
direct_page_fault+0x3cb/0x9b0 [kvm]
kvm_tdp_page_fault+0x2c/0xa0 [kvm]
kvm_mmu_page_fault+0x207/0x930 [kvm]
npf_interception+0x47/0xb0 [kvm_amd]
CVE: CVE-2022-45869
Fixes: a2855afc7ee8 ("KVM: x86/mmu: Allow parallel page faults for the TDP MMU")
Signed-off-by: Kazuki Takiguchi <takiguchi.kazuki171@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Update MAINTAINERS to add Manivannan Sadhasivam as Qcom PCIe RC
maintainer (replacing Stanimir Varbanov) and include DT PCI bindings
in the "PCI native host bridge and endpoint drivers" entry.
* tag 'pci-v6.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Include PCI bindings in host bridge entry
MAINTAINERS: Add Manivannan Sadhasivam as Qcom PCIe RC maintainer
|
|
This was found when virtual machines with nfs-mounted qcow2 disks
failed to boot properly.
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2142132
Fixes: bfbfb6182ad1 ("nfsd_splice_actor(): handle compound pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fixes, all device specific.
The most important ones are for the i.MX driver which had a couple of
nasty data corruption inducing errors appear after the change to
support PIO mode in the last merge window (one introduced by the
change and one latent one which the PIO changes exposed).
Thanks to Frieder, Fabio, Marc and Marek for jumping on that and
resolving the issues quickly once they were found"
* tag 'spi-fix-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-imx: spi_imx_transfer_one(): check for DMA transfer first
spi: tegra210-quad: Fix duplicate resource error
spi: dw-dma: decrease reference count in dw_spi_dma_init_mfld()
spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock
spi: mediatek: Fix DEVAPC Violation at KO Remove
|
|
Pull 9p fixes from Dominique Martinet:
- 9p now uses a variable size for its recv buffer, but every place
hadn't been updated properly to use it and some buffer overflows have
been found and needed fixing.
There's still one place where msize is incorrectly used in a safety
check (p9_check_errors), but all paths leading to it should already
be avoiding overflows and that patch took a bit more time to get
right for zero-copy requests so I'll send it for 6.2
- yet another race condition in p9_conn_cancel introduced by a fix for
a syzbot report in the same place. Maybe at some point we'll get it
right without burning it all down...
* tag '9p-for-6.1-rc7' of https://github.com/martinetd/linux:
9p/xen: check logical size for buffer size
9p/fd: Use P9_HDRSZ for header size
9p/fd: Fix write overflow in p9_read_work
9p/fd: fix issue of list_del corruption in p9_fd_cancel()
|
|
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the vdso Makefile to use "grep -E" instead.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20220920170633.3133829-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The type of a->key[0] is char in fscache_volume_same(). If the length
of cache volume key is greater than 127, the value of a->key[0] is less
than 0. In this case, klen becomes much larger than 255 after type
conversion, because the type of klen is size_t. As a result, memcmp()
is read out of bounds.
This causes a slab-out-of-bounds Read in __fscache_acquire_volume(), as
reported by Syzbot.
Fix this by changing the type of the stored key to "u8 *" rather than
"char *" (it isn't a simple string anyway). Also put in a check that
the volume name doesn't exceed NAME_MAX.
BUG: KASAN: slab-out-of-bounds in memcmp+0x16f/0x1c0 lib/string.c:757
Read of size 8 at addr ffff888016f3aa90 by task syz-executor344/3613
Call Trace:
memcmp+0x16f/0x1c0 lib/string.c:757
memcmp include/linux/fortify-string.h:420 [inline]
fscache_volume_same fs/fscache/volume.c:133 [inline]
fscache_hash_volume fs/fscache/volume.c:171 [inline]
__fscache_acquire_volume+0x76c/0x1080 fs/fscache/volume.c:328
fscache_acquire_volume include/linux/fscache.h:204 [inline]
v9fs_cache_session_get_cookie+0x143/0x240 fs/9p/cache.c:34
v9fs_session_init+0x1166/0x1810 fs/9p/v9fs.c:473
v9fs_mount+0xba/0xc90 fs/9p/vfs_super.c:126
legacy_get_tree+0x105/0x220 fs/fs_context.c:610
vfs_get_tree+0x89/0x2f0 fs/super.c:1530
do_new_mount fs/namespace.c:3040 [inline]
path_mount+0x1326/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
Fixes: 62ab63352350 ("fscache: Implement volume registration")
Reported-by: syzbot+a76f6a6e524cf2080aa3@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Zhang Peng <zhangpeng362@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs-developer@lists.sourceforge.net
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/Y3OH+Dmi0QIOK18n@codewreck.org/ # Zhang Peng's v1 fix
Link: https://lore.kernel.org/r/20221115140447.2971680-1-zhangpeng362@huawei.com/ # Zhang Peng's v2 fix
Link: https://lore.kernel.org/r/166869954095.3793579.8500020902371015443.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
dasd_copy_relation->entry[] array might be accessed out of bounds if the
loop does not break.
Fixes: a91ff09d39f9 ("s390/dasd: add copy pair setup")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For DASD devices in raw_track_access mode only full track images are
read and written.
For this purpose it is not necessary to do search operation in the
locate record extended function. The documentation even states that
this might fail if the searched record is not found on a track.
Currently the driver sets a value of 1 in the search field for the first
record after record zero. This is the default for disks not in
raw_track_access mode but record 1 might be missing on a completely
empty track.
There has not been any problem with this on IBM storage servers but it
might lead to errors with DASD devices on other vendors storage servers.
Fix this by setting the search field to 0. Record zero is always available
even on a completely empty track.
Fixes: e4dbb0f2b5dd ("[S390] dasd: Add support for raw ECKD access.")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
32 byte are to less for important data from prefix or
other commands.
Print up to 128 byte data. This is enough for the largest
CCW data we have.
Since printk can only print up to 1024 byte at once, print the
different parts of the CCW dumps separately.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a spelling mistake in a pr_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220923132103.2486724-1-colin.i.king@gmail.com
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.1
A clutch of small fixes that have come in in the past week, people seem
to have been unusually active for this late in the release cycle. The
most critical one here is the fix to renumber the SOF DAI types in order
to restore ABI compatibility which was broken by the addition of AMD
support.
|
|
Although kset_unregister() can eventually remove all attribute files,
explicitly rolling back with the matching function makes the code logic
look clearer.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging an inode in full mode, or when logging xattrs or when logging
the dir index items of a directory, we are modifying the log tree while
holding a read lock on a leaf from the fs/subvolume tree. This can lead to
a deadlock in rare circumstances, but it is a real possibility, and it was
recently reported by syzbot with the following trace from lockdep:
WARNING: possible circular locking dependency detected
6.1.0-rc5-next-20221116-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.1/16154 is trying to acquire lock:
ffff88807e3084a0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0xa1/0xf30 fs/btrfs/delayed-inode.c:256
but task is already holding lock:
ffff88807df33078 (btrfs-log-00){++++}-{3:3}, at: __btrfs_tree_lock+0x32/0x3d0 fs/btrfs/locking.c:197
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (btrfs-log-00){++++}-{3:3}:
down_read_nested+0x9e/0x450 kernel/locking/rwsem.c:1634
__btrfs_tree_read_lock+0x32/0x350 fs/btrfs/locking.c:135
btrfs_tree_read_lock fs/btrfs/locking.c:141 [inline]
btrfs_read_lock_root_node+0x82/0x3a0 fs/btrfs/locking.c:280
btrfs_search_slot_get_root fs/btrfs/ctree.c:1678 [inline]
btrfs_search_slot+0x3ca/0x2c70 fs/btrfs/ctree.c:1998
btrfs_lookup_csum+0x116/0x3f0 fs/btrfs/file-item.c:209
btrfs_csum_file_blocks+0x40e/0x1370 fs/btrfs/file-item.c:1021
log_csums.isra.0+0x244/0x2d0 fs/btrfs/tree-log.c:4258
copy_items.isra.0+0xbfb/0xed0 fs/btrfs/tree-log.c:4403
copy_inode_items_to_log+0x13d6/0x1d90 fs/btrfs/tree-log.c:5873
btrfs_log_inode+0xb19/0x4680 fs/btrfs/tree-log.c:6495
btrfs_log_inode_parent+0x890/0x2a20 fs/btrfs/tree-log.c:6982
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7083
btrfs_sync_file+0xa41/0x13c0 fs/btrfs/file.c:1921
vfs_fsync_range+0x13e/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2856 [inline]
iomap_dio_complete+0x73a/0x920 fs/iomap/direct-io.c:128
btrfs_direct_write fs/btrfs/file.c:1536 [inline]
btrfs_do_write_iter+0xba2/0x1470 fs/btrfs/file.c:1668
call_write_iter include/linux/fs.h:2160 [inline]
do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735
do_iter_write+0x182/0x700 fs/read_write.c:861
vfs_iter_write+0x74/0xa0 fs/read_write.c:902
iter_file_splice_write+0x745/0xc90 fs/splice.c:686
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x114/0x180 fs/splice.c:931
splice_direct_to_actor+0x335/0x8a0 fs/splice.c:886
do_splice_direct+0x1ab/0x280 fs/splice.c:974
do_sendfile+0xb19/0x1270 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x259/0x2c0 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #1 (btrfs-tree-00){++++}-{3:3}:
__lock_release kernel/locking/lockdep.c:5382 [inline]
lock_release+0x371/0x810 kernel/locking/lockdep.c:5688
up_write+0x2a/0x520 kernel/locking/rwsem.c:1614
btrfs_tree_unlock_rw fs/btrfs/locking.h:189 [inline]
btrfs_unlock_up_safe+0x1e3/0x290 fs/btrfs/locking.c:238
search_leaf fs/btrfs/ctree.c:1832 [inline]
btrfs_search_slot+0x265e/0x2c70 fs/btrfs/ctree.c:2074
btrfs_insert_empty_items+0xbd/0x1c0 fs/btrfs/ctree.c:4133
btrfs_insert_delayed_item+0x826/0xfa0 fs/btrfs/delayed-inode.c:746
btrfs_insert_delayed_items fs/btrfs/delayed-inode.c:824 [inline]
__btrfs_commit_inode_delayed_items fs/btrfs/delayed-inode.c:1111 [inline]
__btrfs_run_delayed_items+0x280/0x590 fs/btrfs/delayed-inode.c:1153
flush_space+0x147/0xe90 fs/btrfs/space-info.c:728
btrfs_async_reclaim_metadata_space+0x541/0xc10 fs/btrfs/space-info.c:1086
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x669/0x1090 kernel/workqueue.c:2436
kthread+0x2e8/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
-> #0 (&delayed_node->mutex){+.+.}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3097 [inline]
check_prevs_add kernel/locking/lockdep.c:3216 [inline]
validate_chain kernel/locking/lockdep.c:3831 [inline]
__lock_acquire+0x2a43/0x56d0 kernel/locking/lockdep.c:5055
lock_acquire kernel/locking/lockdep.c:5668 [inline]
lock_acquire+0x1e3/0x630 kernel/locking/lockdep.c:5633
__mutex_lock_common kernel/locking/mutex.c:603 [inline]
__mutex_lock+0x12f/0x1360 kernel/locking/mutex.c:747
__btrfs_release_delayed_node.part.0+0xa1/0xf30 fs/btrfs/delayed-inode.c:256
__btrfs_release_delayed_node fs/btrfs/delayed-inode.c:251 [inline]
btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline]
btrfs_remove_delayed_node+0x52/0x60 fs/btrfs/delayed-inode.c:1285
btrfs_evict_inode+0x511/0xf30 fs/btrfs/inode.c:5554
evict+0x2ed/0x6b0 fs/inode.c:664
dispose_list+0x117/0x1e0 fs/inode.c:697
prune_icache_sb+0xeb/0x150 fs/inode.c:896
super_cache_scan+0x391/0x590 fs/super.c:106
do_shrink_slab+0x464/0xce0 mm/vmscan.c:843
shrink_slab_memcg mm/vmscan.c:912 [inline]
shrink_slab+0x388/0x660 mm/vmscan.c:991
shrink_node_memcgs mm/vmscan.c:6088 [inline]
shrink_node+0x93d/0x1f30 mm/vmscan.c:6117
shrink_zones mm/vmscan.c:6355 [inline]
do_try_to_free_pages+0x3b4/0x17a0 mm/vmscan.c:6417
try_to_free_mem_cgroup_pages+0x3a4/0xa70 mm/vmscan.c:6732
reclaim_high.constprop.0+0x182/0x230 mm/memcontrol.c:2393
mem_cgroup_handle_over_high+0x190/0x520 mm/memcontrol.c:2578
try_charge_memcg+0xe0c/0x12f0 mm/memcontrol.c:2816
try_charge mm/memcontrol.c:2827 [inline]
charge_memcg+0x90/0x3b0 mm/memcontrol.c:6889
__mem_cgroup_charge+0x2b/0x90 mm/memcontrol.c:6910
mem_cgroup_charge include/linux/memcontrol.h:667 [inline]
__filemap_add_folio+0x615/0xf80 mm/filemap.c:852
filemap_add_folio+0xaf/0x1e0 mm/filemap.c:934
__filemap_get_folio+0x389/0xd80 mm/filemap.c:1976
pagecache_get_page+0x2e/0x280 mm/folio-compat.c:104
find_or_create_page include/linux/pagemap.h:612 [inline]
alloc_extent_buffer+0x2b9/0x1580 fs/btrfs/extent_io.c:4588
btrfs_init_new_buffer fs/btrfs/extent-tree.c:4869 [inline]
btrfs_alloc_tree_block+0x2e1/0x1320 fs/btrfs/extent-tree.c:4988
__btrfs_cow_block+0x3b2/0x1420 fs/btrfs/ctree.c:440
btrfs_cow_block+0x2fa/0x950 fs/btrfs/ctree.c:595
btrfs_search_slot+0x11b0/0x2c70 fs/btrfs/ctree.c:2038
btrfs_update_root+0xdb/0x630 fs/btrfs/root-tree.c:137
update_log_root fs/btrfs/tree-log.c:2841 [inline]
btrfs_sync_log+0xbfb/0x2870 fs/btrfs/tree-log.c:3064
btrfs_sync_file+0xdb9/0x13c0 fs/btrfs/file.c:1947
vfs_fsync_range+0x13e/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2856 [inline]
iomap_dio_complete+0x73a/0x920 fs/iomap/direct-io.c:128
btrfs_direct_write fs/btrfs/file.c:1536 [inline]
btrfs_do_write_iter+0xba2/0x1470 fs/btrfs/file.c:1668
call_write_iter include/linux/fs.h:2160 [inline]
do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735
do_iter_write+0x182/0x700 fs/read_write.c:861
vfs_iter_write+0x74/0xa0 fs/read_write.c:902
iter_file_splice_write+0x745/0xc90 fs/splice.c:686
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x114/0x180 fs/splice.c:931
splice_direct_to_actor+0x335/0x8a0 fs/splice.c:886
do_splice_direct+0x1ab/0x280 fs/splice.c:974
do_sendfile+0xb19/0x1270 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x259/0x2c0 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> btrfs-tree-00 --> btrfs-log-00
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-log-00);
lock(btrfs-tree-00);
lock(btrfs-log-00);
lock(&delayed_node->mutex);
Holding a read lock on a leaf from a fs/subvolume tree creates a nasty
lock dependency when we are COWing extent buffers for the log tree and we
have two tasks modifying the log tree, with each one in one of the
following 2 scenarios:
1) Modifying the log tree triggers an extent buffer allocation while
holding a write lock on a parent extent buffer from the log tree.
Allocating the pages for an extent buffer, or the extent buffer
struct, can trigger inode eviction and finally the inode eviction
will trigger a release/remove of a delayed node, which requires
taking the delayed node's mutex;
2) Allocating a metadata extent for a log tree can trigger the async
reclaim thread and make us wait for it to release enough space and
unblock our reservation ticket. The reclaim thread can start flushing
delayed items, and that in turn results in the need to lock delayed
node mutexes and in the need to write lock extent buffers of a
subvolume tree - all this while holding a write lock on the parent
extent buffer in the log tree.
So one task in scenario 1) running in parallel with another task in
scenario 2) could lead to a deadlock, one wanting to lock a delayed node
mutex while having a read lock on a leaf from the subvolume, while the
other is holding the delayed node's mutex and wants to write lock the same
subvolume leaf for flushing delayed items.
Fix this by cloning the leaf of the fs/subvolume tree, release/unlock the
fs/subvolume leaf and use the clone leaf instead.
Reported-by: syzbot+9b7c21f486f5e7f8d029@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000ccc93c05edc4d8cf@google.com/
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Otherwise the kernel memory allocator seems to be unhappy about failing
order 6 allocations for the zones array, that cause 100% reproducible
mount failures in my qemu setup:
[26.078981] mount: page allocation failure: order:6, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null)
[26.079741] CPU: 0 PID: 2965 Comm: mount Not tainted 6.1.0-rc5+ #185
[26.080181] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[26.080950] Call Trace:
[26.081132] <TASK>
[26.081291] dump_stack_lvl+0x56/0x6f
[26.081554] warn_alloc+0x117/0x140
[26.081808] ? __alloc_pages_direct_compact+0x1b5/0x300
[26.082174] __alloc_pages_slowpath.constprop.0+0xd0e/0xde0
[26.082569] __alloc_pages+0x32a/0x340
[26.082836] __kmalloc_large_node+0x4d/0xa0
[26.083133] ? trace_kmalloc+0x29/0xd0
[26.083399] kmalloc_large+0x14/0x60
[26.083654] btrfs_get_dev_zone_info+0x1b9/0xc00
[26.083980] ? _raw_spin_unlock_irqrestore+0x28/0x50
[26.084328] btrfs_get_dev_zone_info_all_devices+0x54/0x80
[26.084708] open_ctree+0xed4/0x1654
[26.084974] btrfs_mount_root.cold+0x12/0xde
[26.085288] ? lock_is_held_type+0xe2/0x140
[26.085603] legacy_get_tree+0x28/0x50
[26.085876] vfs_get_tree+0x1d/0xb0
[26.086139] vfs_kern_mount.part.0+0x6c/0xb0
[26.086456] btrfs_mount+0x118/0x3a0
[26.086728] ? lock_is_held_type+0xe2/0x140
[26.087043] legacy_get_tree+0x28/0x50
[26.087323] vfs_get_tree+0x1d/0xb0
[26.087587] path_mount+0x2ba/0xbe0
[26.087850] ? _raw_spin_unlock_irqrestore+0x38/0x50
[26.088217] __x64_sys_mount+0xfe/0x140
[26.088506] do_syscall_64+0x35/0x80
[26.088776] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 5b316468983d ("btrfs: get zone information of zoned block devices")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If kzalloc() for 'ap_qci_info_old' failed, 'ap_qci_info' shold be
freed before return. Otherwise it is a memory leak.
Link: https://lore.kernel.org/r/20221114110830.542246-1-weiyongjun@huaweicloud.com
Fixes: 283915850a44 ("s390/ap: notify drivers on config changed and scan complete callbacks")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
root cause that S2A need to use deduct offset flag.
after setting this flag, vcn0 doorbell value works.
so return it as before
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
when the edid is read"
This partially reverts 20543be93ca45968f344261c1a997177e51bd7e1.
Calling drm_connector_update_edid_property() in
amdgpu_connector_free_edid() causes a noticeable pause in
the system every 10 seconds on polled outputs so revert this
part of the change.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2257
Cc: Claudio Suarez <cssk@net-c.es>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[why]
First MST sideband message returns AUX_RET_ERROR_HPD_DISCON
on certain intel platform. Aux transaction considered failure
if HPD unexpected pulled low. The actual aux transaction success
in such case, hence do not return error.
[how]
Not returning error when AUX_RET_ERROR_HPD_DISCON detected
on the first sideband message.
v2: squash in fix (Alex)
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Tsung-hua Lin <Tsung-hua.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
[ 754.862560] refcount_t: underflow; use-after-free.
[ 754.862898] Call Trace:
[ 754.862903] <TASK>
[ 754.862913] amdgpu_job_free_cb+0xc2/0xe1 [amdgpu]
[ 754.863543] drm_sched_main.cold+0x34/0x39 [amd_sched]
[How]
The fw_fence may be not init, check whether dma_fence_init
is performed before job free
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update driver if header for smu_13_0_7
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
|
|
[Why]
Underflow is observed when cursor is still enabled when the cursor
rectangle is outside the bounds of it's surface viewport.
[How]
Update parameters used to determine when cursor should be disabled.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY?]
When calculating watermark and dlg values, the max mclk level index and
associated speed are needed to find the correlated dummy latency value.
Currently the incorrect index is given due to a clock manager refactor.
[HOW?]
Use num_memclk_level from num_entries_per_clk struct for getting the correct max
mem speed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Pixel rate divider values should never be set to N/A (0xF) as the K1/K2
field is only 1/2 bits wide.
[How]
Set valid divider values for virtual and FRL/DP2 cases.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY?]
MALL allocation size depends on the viewport height, not the addressable
vertical lines, which will not match when scaling.
[HOW?]
Base MALL allocation size calculations off viewport height.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
New values for soc bounding box and dummy pstate.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
|
|
There's been a very long running bug that seems to have been neglected for
a while, where amdgpu consistently triggers a KASAN error at start:
BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu]
Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889
After digging through amd's rather creative method for accessing registers,
I eventually discovered the problem likely has to do with the fact that on
my dce120 GPU there are supposedly 7 sets of audio registers. But we only
define a register mapping for 6 sets.
So, fix this and fix the KASAN warning finally.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We can reuse the same buffers on resume.
v2: squash in S4 fix from Shikai
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2213
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
ZLP for DisplayLink ethernet devices was enabled in 6.0:
266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices").
The related driver_info should be the "same as cdc_ncm_info, but with
FLAG_SEND_ZLP". However, set_rx_mode that enables handling multicast
traffic was missing in the new cdc_ncm_zlp_info.
usbnet_cdc_update_filter rx mode was introduced in linux 5.9 with:
e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast
traffic")
Without this hook, multicast, and then IPv6 SLAAC, is broken.
Fixes: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices")
Signed-off-by: Santiago Ruano Rincón <santiago.ruano-rincon@imt-atlantique.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add RmNet support for LARA-L6.
LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface
In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When holding a reader-writer spin lock we cannot sleep. Calling
setup_udp_tunnel_sock() with write lock held violates this rule, because we
end up calling percpu_down_read(), which might sleep, as syzbot reports
[1]:
__might_resched.cold+0x222/0x26b kernel/sched/core.c:9890
percpu_down_read include/linux/percpu-rwsem.h:49 [inline]
cpus_read_lock+0x1b/0x140 kernel/cpu.c:310
static_key_slow_inc+0x12/0x20 kernel/jump_label.c:158
udp_tunnel_encap_enable include/net/udp_tunnel.h:187 [inline]
setup_udp_tunnel_sock+0x43d/0x550 net/ipv4/udp_tunnel_core.c:81
l2tp_tunnel_register+0xc51/0x1210 net/l2tp/l2tp_core.c:1509
pppol2tp_connect+0xcdc/0x1a10 net/l2tp/l2tp_ppp.c:723
Trim the writer-side critical section for sk_callback_lock down to the
minimum, so that it covers only operations on sk_user_data.
Also, when grabbing the sk_callback_lock, we always need to disable BH, as
Eric points out. Failing to do so leads to deadlocks because we acquire
sk_callback_lock in softirq context, which can get stuck waiting on us if:
1) it runs on the same CPU, or
CPU0
----
lock(clock-AF_INET6);
<Interrupt>
lock(clock-AF_INET6);
2) lock ordering leads to priority inversion
CPU0 CPU1
---- ----
lock(clock-AF_INET6);
local_irq_disable();
lock(&tcp_hashinfo.bhash[i].lock);
lock(clock-AF_INET6);
<Interrupt>
lock(&tcp_hashinfo.bhash[i].lock);
... as syzbot reports [2,3]. Use the _bh variants for write_(un)lock.
[1] https://lore.kernel.org/netdev/0000000000004e78ec05eda79749@google.com/
[2] https://lore.kernel.org/netdev/000000000000e38b6605eda76f98@google.com/
[3] https://lore.kernel.org/netdev/000000000000dfa31e05eda76f75@google.com/
v2:
- Check and set sk_user_data while holding sk_callback_lock for both
L2TP encapsulation types (IP and UDP) (Tetsuo)
Cc: Tom Parkin <tparkin@katalix.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Fixes: b68777d54fac ("l2tp: Serialize access to sk_user_data with sk_callback_lock")
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+703d9e154b3b58277261@syzkaller.appspotmail.com
Reported-by: syzbot+50680ced9e98a61f7698@syzkaller.appspotmail.com
Reported-by: syzbot+de987172bb74a381879b@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dm9051_loop_rx() returns without release skb when dm9051_stop_mrcmd()
returns error, free the skb to avoid this leak.
Fixes: 2dc95a4d30ed ("net: Add dm9051 driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In com20020_probe(), if com20020_config() fails, dev and info
will not be freed, which will lead to a memory leak.
This patch adds freeing dev and info after com20020_config()
fails to fix this bug.
Compile tested only.
Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixes to make the automated binding tools happier (node-names,
undocumented + unneeded properties) and fixes for non-working
devices on some boards.
* tag 'v6.1-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt
ARM: dts: rockchip: rk3188: fix lcdc1-rgb24 node name
arm64: dts: rockchip: fix ir-receiver node names
ARM: dts: rockchip: fix ir-receiver node names
arm64: dts: rockchip: fix adc-keys sub node names
ARM: dts: rockchip: fix adc-keys sub node names
arm: dts: rockchip: remove clock-frequency from rtc
arm: dts: rockchip: fix node name for hym8563 rtc
arm64: dts: rockchip: remove clock-frequency from rtc
arm64: dts: rockchip: fix node name for hym8563 rtc
arm64: dts: rockchip: lower rk3399-puma-haikou SD controller clock frequency
arm64: dts: rockchip: keep I2S1 disabled for GPIO function on ROCK Pi 4 series
arm64: dts: rockchip: fix quartz64-a bluetooth configuration
arm64: dts: rockchip: add enable-strobe-pulldown to emmc phy on nanopi4
arm64: dts: rockchip: remove i2c5 from rk3566-roc-pc
arm64: dts: rockchip: Fix i2c3 pinctrl on rk3566-roc-pc
arm64: dts: rockchip: Fix gmac failure of rgmii-id from rk3566-roc-pc
arm64: dts: rockchip: Drop RK3399-Scarlet's repeated ec_ap_int_l definition
Link: https://lore.kernel.org/r/6274427.GXAFRqVoOG@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
trans_xen did not check the data fits into the buffer before copying
from the xen ring, but we probably should.
Add a check that just skips the request and return an error to
userspace if it did not fit
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Link: https://lkml.kernel.org/r/20221118135542.63400-1-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-11-21
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix possible race condition in macsec extended packet number update routine
net/mlx5e: Fix MACsec update SecY
net/mlx5e: Fix MACsec SA initialization routine
net/mlx5e: Remove leftovers from old XSK queues enumeration
net/mlx5e: Offload rule only when all encaps are valid
net/mlx5e: Fix missing alignment in size of MTT/KLM entries
net/mlx5: Fix sync reset event handler error flow
net/mlx5: E-Switch, Set correctly vport destination
net/mlx5: Lag, avoid lockdep warnings
net/mlx5: Fix handling of entry refcount when command is not issued to FW
net/mlx5: cmdif, Print info on any firmware cmd failure to tracepoint
net/mlx5: SF: Fix probing active SFs during driver probe phase
net/mlx5: Fix FW tracer timestamp calculation
net/mlx5: Do not query pci info while pci disabled
====================
Link: https://lore.kernel.org/r/20221122022559.89459-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In fib_table_insert(), if the alias was already inserted, but node not
exist, the error code should be set before return from error handling path.
Fixes: a6c76c17df02 ("ipv4: Notify route after insertion to the routing table")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20221120072838.2167047-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Yan Cangang says:
====================
net: ethernet: mtk_eth_soc: fix memory leak in error path
====================
Link: https://lore.kernel.org/r/20221120055259.224555-1-nalanzeyu@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mtk_ppe_init(), when dmam_alloc_coherent() or devm_kzalloc() failed,
the rhashtable ppe->l2_flows isn't destroyed. Fix it.
In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() or
register_netdev() failed, have the same problem. Fix it.
Fixes: 33fc42de3327 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mtk_probe(), when mtk_ppe_init() or mtk_eth_offload_init() failed,
mtk_mdio_cleanup() isn't called. Fix it.
Fixes: ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE")
Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fail to dma_map_single() in mtk_rx_alloc(), it returns directly.
But the memory allocated for local variable data is not freed, and
local variabel data has not been attached to ring->data[i] yet, so the
memory allocated for local variable data will not be freed outside
mtk_rx_alloc() too. Thus memory leak would occur in this scenario.
Add skb_free_frag(data) when dma_map_single() failed.
Fixes: 23233e577ef9 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Link: https://lore.kernel.org/r/20221120035405.1464341-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'dccp-tcp-fix-bhash2-issues-related-to-warn_on-in-inet_csk_get_port'
Kuniyuki Iwashima says:
====================
dccp/tcp: Fix bhash2 issues related to WARN_ON() in inet_csk_get_port().
syzkaller was hitting a WARN_ON() in inet_csk_get_port() in the 4th patch,
which was because we forgot to fix up bhash2 bucket when connect() for a
socket bound to a wildcard address fails in __inet_stream_connect().
There was a similar report [0], but its repro does not fire the WARN_ON() due
to inconsistent error handling.
When connect() for a socket bound to a wildcard address fails, saddr may or
may not be reset depending on where the failure happens. When we fail in
__inet_stream_connect(), sk->sk_prot->disconnect() resets saddr. OTOH, in
(dccp|tcp)_v[46]_connect(), if we fail after inet_hash6?_connect(), we
forget to reset saddr.
We fix this inconsistent error handling in the 1st patch, and then we'll
fix the bhash2 WARN_ON() issue.
Note that there is still an issue in that we reset saddr without checking
if there are conflicting sockets in bhash and bhash2, but this should be
another series.
See [1][2] for the previous discussion.
[0]: https://lore.kernel.org/netdev/0000000000003f33bc05dfaf44fe@google.com/
[1]: https://lore.kernel.org/netdev/20221029001249.86337-1-kuniyu@amazon.com/
[2]: https://lore.kernel.org/netdev/20221103172419.20977-1-kuniyu@amazon.com/
[3]: https://lore.kernel.org/netdev/20221118081906.053d5231@kernel.org/T/#m00aafedb29ff0b55d5e67aef0252ef1baaf4b6ee
====================
Link: https://lore.kernel.org/r/20221119014914.31792-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a socket bound to a wildcard address fails to connect(), we
only reset saddr and keep the port. Then, we have to fix up the
bhash2 bucket; otherwise, the bucket has an inconsistent address
in the list.
Also, listen() for such a socket will fire the WARN_ON() in
inet_csk_get_port(). [0]
Note that when a system runs out of memory, we give up fixing the
bucket and unlink sk from bhash and bhash2 by inet_put_port().
[0]:
WARNING: CPU: 0 PID: 207 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1))
Modules linked in:
CPU: 0 PID: 207 Comm: bhash2_prev_rep Not tainted 6.1.0-rc3-00799-gc8421681c845 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
RIP: 0010:inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1))
Code: 74 a7 eb 93 48 8b 54 24 18 0f b7 cb 4c 89 e6 4c 89 ff e8 48 b2 ff ff 49 8b 87 18 04 00 00 e9 32 ff ff ff 0f 0b e9 34 ff ff ff <0f> 0b e9 42 ff ff ff 41 8b 7f 50 41 8b 4f 54 89 fe 81 f6 00 00 ff
RSP: 0018:ffffc900003d7e50 EFLAGS: 00010202
RAX: ffff8881047fb500 RBX: 0000000000004e20 RCX: 0000000000000000
RDX: 000000000000000a RSI: 00000000fffffe00 RDI: 00000000ffffffff
RBP: ffffffff8324dc00 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000004e20 R15: ffff8881054e1280
FS: 00007f8ac04dc740(0000) GS:ffff88842fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020001540 CR3: 00000001055fa003 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
inet_csk_listen_start (net/ipv4/inet_connection_sock.c:1205)
inet_listen (net/ipv4/af_inet.c:228)
__sys_listen (net/socket.c:1810)
__x64_sys_listen (net/socket.c:1819 net/socket.c:1817 net/socket.c:1817)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f8ac051de5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 af 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc1c177248 EFLAGS: 00000206 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 0000000020001550 RCX: 00007f8ac051de5d
RDX: ffffffffffffff80 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 00007ffc1c177270 R08: 0000000000000018 R09: 0000000000000007
R10: 0000000020001540 R11: 0000000000000206 R12: 00007ffc1c177388
R13: 0000000000401169 R14: 0000000000403e18 R15: 00007f8ac0723000
</TASK>
Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When we call connect() for a socket bound to a wildcard address, we update
saddr locklessly. However, it could result in a data race; another thread
iterating over bhash might see a corrupted address.
Let's update saddr under the bhash bucket's lock.
Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When we call inet_bhash2_update_saddr(), prev_saddr is always non-NULL.
Let's remove the unnecessary test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When connect() is called on a socket bound to the wildcard address,
we change the socket's saddr to a local address. If the socket
fails to connect() to the destination, we have to reset the saddr.
However, when an error occurs after inet_hash6?_connect() in
(dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave
the socket bound to the address.
From the user's point of view, whether saddr is reset or not varies
with errno. Let's fix this inconsistent behaviour.
Note that after this patch, the repro [0] will trigger the WARN_ON()
in inet_csk_get_port() again, but this patch is not buggy and rather
fixes a bug papering over the bhash2's bug for which we need another
fix.
For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect()
by this sequence:
s1 = socket()
s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s1.bind(('127.0.0.1', 10000))
s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000)))
# or s1.connect(('127.0.0.1', 10000))
s2 = socket()
s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s2.bind(('0.0.0.0', 10000))
s2.connect(('127.0.0.1', 10000)) # -EADDRNOTAVAIL
s2.listen(32) # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2);
[0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09
Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If KPROBES_SANITY_TEST and ARCH_CORRECT_STACKTRACE_ON_KRETPROBE is enabled, but
STACKTRACE is not set. Build failed as below:
lib/test_kprobes.c: In function `stacktrace_return_handler':
lib/test_kprobes.c:228:8: error: implicit declaration of function `stack_trace_save'; did you mean `stacktrace_driver'? [-Werror=implicit-function-declaration]
ret = stack_trace_save(stack_buf, STACK_BUF_SIZE, 0);
^~~~~~~~~~~~~~~~
stacktrace_driver
cc1: all warnings being treated as errors
scripts/Makefile.build:250: recipe for target 'lib/test_kprobes.o' failed
make[2]: *** [lib/test_kprobes.o] Error 1
To fix this error, Select STACKTRACE if ARCH_CORRECT_STACKTRACE_ON_KRETPROBE is enabled.
Link: https://lkml.kernel.org/r/20221121030620.63181-1-hucool.lihua@huawei.com
Fixes: 1f6d3a8f5e39 ("kprobes: Add a test case for stacktrace from kretprobe handler")
Signed-off-by: Li Hua <hucool.lihua@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When extending segments, nilfs_sufile_alloc() is called to get an
unassigned segment, then mark it as dirty to avoid accidentally allocating
the same segment in the future.
But for some special cases such as a corrupted image it can be unreliable.
If such corruption of the dirty state of the segment occurs, nilfs2 may
reallocate a segment that is in use and pick the same segment for writing
twice at the same time.
This will cause the problem reported by syzkaller:
https://syzkaller.appspot.com/bug?id=c7c4748e11ffcc367cef04f76e02e931833cbd24
This case started with segbuf1.segnum = 3, nextnum = 4 when constructed.
It supposed segment 4 has already been allocated and marked as dirty.
However the dirty state was corrupted and segment 4 usage was not dirty.
For the first time nilfs_segctor_extend_segments() segment 4 was allocated
again, which made segbuf2 and next segbuf3 had same segment 4.
sb_getblk() will get same bh for segbuf2 and segbuf3, and this bh is added
to both buffer lists of two segbuf. It makes the lists broken which
causes NULL pointer dereference.
Fix the problem by setting usage as dirty every time in
nilfs_sufile_mark_dirty(), which is called during constructing current
segment to be written out and before allocating next segment.
[chenzhongjin@huawei.com: add lock protection per Ryusuke]
Link: https://lkml.kernel.org/r/20221121091141.214703-1-chenzhongjin@huawei.com
Link: https://lkml.kernel.org/r/20221118063304.140187-1-chenzhongjin@huawei.com
Fixes: 9ff05123e3bf ("nilfs2: segment constructor")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: <syzbot+77e4f0...@syzkaller.appspotmail.com>
Reported-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
balance_dirty_pages doesn't do the required dirty throttling on cgroupv1.
See commit 9badce000e2c ("cgroup, writeback: don't enable cgroup writeback
on traditional hierarchies"). Instead, the kernel depends on writeback
throttling in shrink_folio_list to achieve the same goal. With large
memory systems, the flusher may not be able to writeback quickly enough
such that we will start finding pages in the shrink_folio_list already in
writeback. Hence for cgroupv1 let's do a reclaim throttle after waking up
the flusher.
The below test which used to fail on a 256GB system completes till the the
file system is full with this change.
root@lp2:/sys/fs/cgroup/memory# mkdir test
root@lp2:/sys/fs/cgroup/memory# cd test/
root@lp2:/sys/fs/cgroup/memory/test# echo 120M > memory.limit_in_bytes
root@lp2:/sys/fs/cgroup/memory/test# echo $$ > tasks
root@lp2:/sys/fs/cgroup/memory/test# dd if=/dev/zero of=/home/kvaneesh/test bs=1M
Killed
Link: https://lkml.kernel.org/r/20221118070603.84081-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: zefan li <lizefan.x@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When we specify __GFP_NOWARN, we only expect that no warnings will be
issued for current caller. But in the __should_failslab() and
__should_fail_alloc_page(), the local GFP flags alter the global
{failslab|fail_page_alloc}.attr, which is persistent and shared by all
tasks. This is not what we expected, let's fix it.
[akpm@linux-foundation.org: unexport should_fail_ex()]
Link: https://lkml.kernel.org/r/20221118100011.2634-1-zhengqi.arch@bytedance.com
Fixes: 3f913fc5f974 ("mm: fix missing handler for __GFP_NOWARN")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A softlockup occurs in scan free swap slot under huge memory pressure.
The test scenario is: 64 CPU cores, 64GB memory, and 28 zram devices, the
disksize of each zram device is 50MB.
LATENCY_LIMIT is used to prevent softlockups in scan_swap_map_slots(), but
the real loop number would more than LATENCY_LIMIT because of "goto checks
and goto scan" repeatly without decreasing latency limit.
In order to fix it, decrease latency_ration in advance.
There is also a suspicious place that will cause softlockups in
get_swap_pages(). In this function, the "goto start_over" may result in
continuous scanning of the swap partition. If there is no cond_sched in
scan_swap_map_slots(), it would cause a softlockup (I am not sure about
this).
WARN: soft lockup - CPU#11 stuck for 11s! [kswapd0:466]
CPU: 11 PID: 466 Comm: kswapd@ Kdump: loaded Tainted: G
dump backtrace+0x0/0x1le4
show stack+0x20/@x2c
dump_stack+0xd8/0x140
watchdog print_info+0x48/0x54
watchdog_process_before_softlockup+0x98/0xa0
watchdog_timer_fn+0xlac/0x2d0
hrtimer_rum_queues+0xb0/0x130
hrtimer_interrupt+0x13c/0x3c0
arch_timer_handler_virt+0x3c/0x50
handLe_percpu_devid_irq+0x90/0x1f4
handle domain irq+0x84/0x100
gic_handle_irq+0x88/0x2b0
e11 ira+0xhB/Bx140
scan_swap_map_slots+0x678/0x890
get_swap_pages+0x29c/0x440
get_swap_page+0x120/0x2e0
add_to_swap+UX2U/0XyC
shrink_page_list+0x5d0/0x152c
shrink_inactive_list+0xl6c/Bx500
shrink_lruvec+0x270/0x304
WARN: soft lockup - CPU#32 stuck for 11s! [stress-ng:309915]
watchdog_timer_fn+0x1ac/0x2d0
__run_hrtimer+0x98/0x2a0
__hrtimer_run_queues+0xb0/0x130
hrtimer_interrupt+0x13c/0x3c0
arch_timer_handler_virt+0x3c/0x50
handle_percpu_devid_irq+0x90/0x1f4
__handle_domain_irq+0x84/0x100
gic_handle_irq+0x88/0x2b0
el1_irq+0xb8/0x140
get_swap_pages+0x1e8/0x440
get_swap_page+0x1c8/0x2e0
add_to_swap+0x20/0x9c
shrink_page_list+0x5d0/0x152c
reclaim_pages+0x160/0x310
madvise_cold_or_pageout_pte_range+0x7bc/0xe3c
walk_pmd_range.isra.0+0xac/0x22c
walk_pud_range+0xfc/0x1c0
walk_pgd_range+0x158/0x1b0
__walk_page_range+0x64/0x100
walk_page_range+0x104/0x150
Link: https://lkml.kernel.org/r/20221118133850.3360369-1-chenwandun@huawei.com
Fixes: 048c27fd7281 ("[PATCH] swap: scan_swap_map latency breaks")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: <xialonglong1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 2b21624fc232 ("hugetlb: freeze allocated pages before creating
hugetlb pages") changed the order page flags were cleared and set in the
head page. It moved the __ClearPageReserved after __SetPageHead.
However, there is a check to make sure __ClearPageReserved is never done
on a head page. If CONFIG_DEBUG_VM_PGFLAGS is enabled, the following BUG
will be hit when creating a hugetlb gigantic page:
page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
------------[ cut here ]------------
kernel BUG at include/linux/page-flags.h:500!
Call Trace will differ depending on whether hugetlb page is created
at boot time or run time.
Make sure to __ClearPageReserved BEFORE __SetPageHead.
Link: https://lkml.kernel.org/r/20221118195249.178319-1-mike.kravetz@oracle.com
Fixes: 2b21624fc232 ("hugetlb: freeze allocated pages before creating hugetlb pages")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Tarun Sahu <tsahu@linux.ibm.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b14051352465 ("mm/sl[au]b: generalize kmalloc subsystem")
refactored large parts of the kmalloc subsystem, resulting in the stack
trace pruning logic done by KFENCE to no longer work.
While b14051352465 attempted to fix the situation by including
'__kmem_cache_free' in the list of functions KFENCE should skip through,
this only works when the compiler actually optimized the tail call from
kfree() to __kmem_cache_free() into a jump (and thus kfree() _not_
appearing in the full stack trace to begin with).
In some configurations, the compiler no longer optimizes the tail call
into a jump, and __kmem_cache_free() appears in the stack trace. This
means that the pruned stack trace shown by KFENCE would include kfree()
which is not intended - for example:
| BUG: KFENCE: invalid free in kfree+0x7c/0x120
|
| Invalid free of 0xffff8883ed8fefe0 (in kfence-#126):
| kfree+0x7c/0x120
| test_double_free+0x116/0x1a9
| kunit_try_run_case+0x90/0xd0
| [...]
Fix it by moving __kmem_cache_free() to the list of functions that may be
tail called by an allocator entry function, making the pruning logic work
in both the optimized and unoptimized tail call cases.
Link: https://lkml.kernel.org/r/20221118152216.3914899-1-elver@google.com
Fixes: b14051352465 ("mm/sl[au]b: generalize kmalloc subsystem")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
SecPageTables has a tab after it instead of a space, this can break
fragile parsers that depend on spaces after the stat names.
Link: https://lkml.kernel.org/r/20221117043247.133294-1-yosryahmed@google.com
Fixes: ebc97a52b5d6cd5f ("mm: add NR_SECONDARY_PAGETABLE to count secondary page table uses.")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The page reclaim isolates a batch of folios from the tail of one of the
LRU lists and works on those folios one by one. For a suitable
swap-backed folio, if the swap device is async, it queues that folio for
writeback. After the page reclaim finishes an entire batch, it puts back
the folios it queued for writeback to the head of the original LRU list.
In the meantime, the page writeback flushes the queued folios also by
batches. Its batching logic is independent from that of the page reclaim.
For each of the folios it writes back, the page writeback calls
folio_rotate_reclaimable() which tries to rotate a folio to the tail.
folio_rotate_reclaimable() only works for a folio after the page reclaim
has put it back. If an async swap device is fast enough, the page
writeback can finish with that folio while the page reclaim is still
working on the rest of the batch containing it. In this case, that folio
will remain at the head and the page reclaim will not retry it before
reaching there.
This patch adds a retry to evict_folios(). After evict_folios() has
finished an entire batch and before it puts back folios it cannot free
immediately, it retries those that may have missed the rotation.
Before this patch, ~60% of folios swapped to an Intel Optane missed
folio_rotate_reclaimable(). After this patch, ~99% of missed folios were
reclaimed upon retry.
This problem affects relatively slow async swap devices like Samsung 980
Pro much less and does not affect sync swap devices like zram or zswap at
all.
Link: https://lkml.kernel.org/r/20221116013808.3995280-1-yuzhao@google.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: "Yin, Fengwei" <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add and also update email address, skakit@codeaurora.org is no longer
active.
Link: https://lkml.kernel.org/r/20221116105017.3018971-1-quic_c_skakit@quicinc.com
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
migrate_vma->cpages originally contained a count of the number of pages
migrating including non-present pages which can be populated directly on
the target.
Commit 241f68859656 ("mm/migrate_device.c: refactor migrate_vma and
migrate_device_coherent_page()") inadvertantly changed this to contain
just the number of pages that were unmapped. Usage of migrate_vma->cpages
isn't documented, but most drivers use it to see if all the requested
addresses can be migrated so restore the original behaviour.
Link: https://lkml.kernel.org/r/20221111005135.1344004-1-apopple@nvidia.com
Fixes: 241f68859656 ("mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add missing <linux/string.h> include for strcmp.
Clang 16 makes -Wimplicit-function-declaration an error by default.
Unfortunately, out of tree modules may use this in configure scripts,
which means failure might cause silent miscompilation or misconfiguration.
For more information, see LWN.net [0] or LLVM's Discourse [1], gentoo-dev@ [2],
or the (new) c-std-porting mailing list [3].
[0] https://lwn.net/Articles/913505/
[1] https://discourse.llvm.org/t/configure-script-breakage-with-the-new-werror-implicit-function-declaration/65213
[2] https://archives.gentoo.org/gentoo-dev/message/dd9f2d3082b8b6f8dfbccb0639e6e240
[3] hosted at lists.linux.dev.
[akpm@linux-foundation.org: remember "linux/"]
Link: https://lkml.kernel.org/r/20221116182634.2823136-1-sam@gentoo.org
Signed-off-by: Sam James <sam@gentoo.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use my personal email address.
Link: https://lkml.kernel.org/r/20221114001302.671897-2-alex.hung@amd.com
Signed-off-by: Alex Hung <alexhung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I am no longer at Canonical and add entry of my personal email address.
Link: https://lkml.kernel.org/r/20221114001302.671897-1-alex.hung@amd.com
Signed-off-by: Alex Hung <alexhung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the struct_mm input, mm, was changed to a struct ma_state, mas, the
documentation for the function was never updated. This updates that
documentation reference.
Link: https://lkml.kernel.org/r/20221114003349.41235-1-ian@linux.cowan.aero
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A DAMON sysfs interface user can start DAMON with a scheme, remove the
sysfs directory for the scheme, and then ask update of the scheme's stats.
Because the schemes stats update logic isn't aware of the situation, it
results in an invalid memory access. Fix the bug by checking if the
scheme sysfs directory exists.
Link: https://lkml.kernel.org/r/20221114175552.1951-1-sj@kernel.org
Fixes: 0ac32b8affb5 ("mm/damon/sysfs: support DAMOS stats")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [v5.18]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The migrate_to_ram() callback should always succeed, but in rare cases can
fail usually returning VM_FAULT_SIGBUS. Commit 16ce101db85d
("mm/memory.c: fix race when faulting a device private page") incorrectly
stopped passing the return code up the stack. Fix this by setting the ret
variable, restoring the previous behaviour on migrate_to_ram() failure.
Link: https://lkml.kernel.org/r/20221114115537.727371-1-apopple@nvidia.com
Fixes: 16ce101db85d ("mm/memory.c: fix race when faulting a device private page")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Kswapd will reclaim memory when memory pressure is high, the annonymous
memory will be compressed and stored in the zpool if zswap is enabled.
The memcg_kmem_bypass() in get_obj_cgroup_from_page() will bypass the
kernel thread and cause the compressed memory not be charged to its memory
cgroup.
Remove the memcg_kmem_bypass() call and properly charge compressed memory
to its corresponding memory cgroup.
Link: https://lore.kernel.org/linux-mm/CALvZod4nnn8BHYqAM4xtcR0Ddo2-Wr8uKm9h_CHWUaXw7g_DCg@mail.gmail.com/
Link: https://lkml.kernel.org/r/20221114194828.100822-1-hannes@cmpxchg.org
Fixes: f4840ccfca25 ("zswap: memcg accounting")
Signed-off-by: Li Liguang <liliguang@baidu.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Shared memory segments can be created that are backed by hugetlb pages.
When this happens, the vmas associated with any mappings (shmat) are
marked VM_HUGETLB, yet the vm_ops for such mappings are provided by
ipc/shm (shm_vm_ops). There is a mechanism to call the underlying hugetlb
vm_ops, and this is done for most operations. However, it is not done for
open and close.
This was not an issue until the introduction of the hugetlb vma_lock.
This lock structure is pointed to by vm_private_data and the open/close
vm_ops help maintain this structure. The special hugetlb routine called
at fork took care of structure updates at fork time. However,
vma_splitting is not properly handled for ipc shared memory mappings
backed by hugetlb pages. This can result in a "kernel NULL pointer
dereference" BUG or use after free as two vmas point to the same lock
structure.
Update the shm open and close routines to always call the underlying open
and close routines.
Link: https://lkml.kernel.org/r/20221114210018.49346-1-mike.kravetz@oracle.com
Fixes: 8d9bfb260814 ("hugetlb: add vma based lock for pmd sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Doug Nelson <doug.nelson@intel.com>
Reported-by: <syzbot+83b4134621b7c326d950@syzkaller.appspotmail.com>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, in clang version of gcov code when module is getting removed
gcov_info_add() incorrectly adds the sfn_ptr->counter to all the
dst->functions and it result in the kernel panic in below crash report.
Fix this by properly handling it.
[ 8.899094][ T599] Unable to handle kernel write to read-only memory at virtual address ffffff80461cc000
[ 8.899100][ T599] Mem abort info:
[ 8.899102][ T599] ESR = 0x9600004f
[ 8.899103][ T599] EC = 0x25: DABT (current EL), IL = 32 bits
[ 8.899105][ T599] SET = 0, FnV = 0
[ 8.899107][ T599] EA = 0, S1PTW = 0
[ 8.899108][ T599] FSC = 0x0f: level 3 permission fault
[ 8.899110][ T599] Data abort info:
[ 8.899111][ T599] ISV = 0, ISS = 0x0000004f
[ 8.899113][ T599] CM = 0, WnR = 1
[ 8.899114][ T599] swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000ab8de000
[ 8.899116][ T599] [ffffff80461cc000] pgd=18000009ffcde003, p4d=18000009ffcde003, pud=18000009ffcde003, pmd=18000009ffcad003, pte=00600000c61cc787
[ 8.899124][ T599] Internal error: Oops: 9600004f [#1] PREEMPT SMP
[ 8.899265][ T599] Skip md ftrace buffer dump for: 0x1609e0
....
..,
[ 8.899544][ T599] CPU: 7 PID: 599 Comm: modprobe Tainted: G S OE 5.15.41-android13-8-g38e9b1af6bce #1
[ 8.899547][ T599] Hardware name: XXX (DT)
[ 8.899549][ T599] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[ 8.899551][ T599] pc : gcov_info_add+0x9c/0xb8
[ 8.899557][ T599] lr : gcov_event+0x28c/0x6b8
[ 8.899559][ T599] sp : ffffffc00e733b00
[ 8.899560][ T599] x29: ffffffc00e733b00 x28: ffffffc00e733d30 x27: ffffffe8dc297470
[ 8.899563][ T599] x26: ffffffe8dc297000 x25: ffffffe8dc297000 x24: ffffffe8dc297000
[ 8.899566][ T599] x23: ffffffe8dc0a6200 x22: ffffff880f68bf20 x21: 0000000000000000
[ 8.899569][ T599] x20: ffffff880f68bf00 x19: ffffff8801babc00 x18: ffffffc00d7f9058
[ 8.899572][ T599] x17: 0000000000088793 x16: ffffff80461cbe00 x15: 9100052952800785
[ 8.899575][ T599] x14: 0000000000000200 x13: 0000000000000041 x12: 9100052952800785
[ 8.899577][ T599] x11: ffffffe8dc297000 x10: ffffffe8dc297000 x9 : ffffff80461cbc80
[ 8.899580][ T599] x8 : ffffff8801babe80 x7 : ffffffe8dc2ec000 x6 : ffffffe8dc2ed000
[ 8.899583][ T599] x5 : 000000008020001f x4 : fffffffe2006eae0 x3 : 000000008020001f
[ 8.899586][ T599] x2 : ffffff8027c49200 x1 : ffffff8801babc20 x0 : ffffff80461cb3a0
[ 8.899589][ T599] Call trace:
[ 8.899590][ T599] gcov_info_add+0x9c/0xb8
[ 8.899592][ T599] gcov_module_notifier+0xbc/0x120
[ 8.899595][ T599] blocking_notifier_call_chain+0xa0/0x11c
[ 8.899598][ T599] do_init_module+0x2a8/0x33c
[ 8.899600][ T599] load_module+0x23cc/0x261c
[ 8.899602][ T599] __arm64_sys_finit_module+0x158/0x194
[ 8.899604][ T599] invoke_syscall+0x94/0x2bc
[ 8.899607][ T599] el0_svc_common+0x1d8/0x34c
[ 8.899609][ T599] do_el0_svc+0x40/0x54
[ 8.899611][ T599] el0_svc+0x94/0x2f0
[ 8.899613][ T599] el0t_64_sync_handler+0x88/0xec
[ 8.899615][ T599] el0t_64_sync+0x1b4/0x1b8
[ 8.899618][ T599] Code: f905f56c f86e69ec f86e6a0f 8b0c01ec (f82e6a0c)
[ 8.899620][ T599] ---[ end trace ed5218e9e5b6e2e6 ]---
Link: https://lkml.kernel.org/r/1668020497-13142-1-git-send-email-quic_mojha@quicinc.com
Fixes: e178a5beb369 ("gcov: clang support")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org> [5.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
filename from function call
Refactor the mm_khugepaged_scan_file tracepoint to move filename
dereference to the tracepoint definition, to maintain consistency with
other tracepoints[1].
[1]:lore.kernel.org/lkml/20221024111621.3ba17e2c@gandalf.local.home/
Link: https://lkml.kernel.org/r/20221026044524.54793-1-gautammenghani201@gmail.com
Fixes: d41fd2016ed07 ("mm/khugepaged: add tracepoint to hpage_collapse_scan_file()")
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix the below compiler warnings reported with 'make W=1 mm/'.
mm/page_ext.c:178: warning: Function parameter or member 'page_ext' not
described in 'page_ext_put'.
[quic_pkondeti@quicinc.com: better patch title]
Link: https://lkml.kernel.org/r/1667884582-2465-1-git-send-email-quic_charante@quicinc.com
Fixes: b1d5488a252dc9 ("mm: fix use-after free of page_ext after race with memory-offline")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavan Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Syzbot reported the below splat:
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 __alloc_pages_node include/linux/gfp.h:221 [inline]
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 hpage_collapse_alloc_page mm/khugepaged.c:807 [inline]
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 alloc_charge_hpage+0x802/0xaa0 mm/khugepaged.c:963
Modules linked in:
CPU: 1 PID: 3646 Comm: syz-executor210 Not tainted 6.1.0-rc1-syzkaller-00454-ga70385240892 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
RIP: 0010:__alloc_pages_node include/linux/gfp.h:221 [inline]
RIP: 0010:hpage_collapse_alloc_page mm/khugepaged.c:807 [inline]
RIP: 0010:alloc_charge_hpage+0x802/0xaa0 mm/khugepaged.c:963
Code: e5 01 4c 89 ee e8 6e f9 ae ff 4d 85 ed 0f 84 28 fc ff ff e8 70 fc ae ff 48 8d 6b ff 4c 8d 63 07 e9 16 fc ff ff e8 5e fc ae ff <0f> 0b e9 96 fa ff ff 41 bc 1a 00 00 00 e9 86 fd ff ff e8 47 fc ae
RSP: 0018:ffffc90003fdf7d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888077f457c0 RSI: ffffffff81cd8f42 RDI: 0000000000000001
RBP: ffff888079388c0c R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f6b48ccf700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6b48a819f0 CR3: 00000000171e7000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
collapse_file+0x1ca/0x5780 mm/khugepaged.c:1715
hpage_collapse_scan_file+0xd6c/0x17a0 mm/khugepaged.c:2156
madvise_collapse+0x53a/0xb40 mm/khugepaged.c:2611
madvise_vma_behavior+0xd0a/0x1cc0 mm/madvise.c:1066
madvise_walk_vmas+0x1c7/0x2b0 mm/madvise.c:1240
do_madvise.part.0+0x24a/0x340 mm/madvise.c:1419
do_madvise mm/madvise.c:1432 [inline]
__do_sys_madvise mm/madvise.c:1432 [inline]
__se_sys_madvise mm/madvise.c:1430 [inline]
__x64_sys_madvise+0x113/0x150 mm/madvise.c:1430
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f6b48a4eef9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6b48ccf318 EFLAGS: 00000246 ORIG_RAX: 000000000000001c
RAX: ffffffffffffffda RBX: 00007f6b48af0048 RCX: 00007f6b48a4eef9
RDX: 0000000000000019 RSI: 0000000000600003 RDI: 0000000020000000
RBP: 00007f6b48af0040 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6b48aa53a4
R13: 00007f6b48bffcbf R14: 00007f6b48ccf400 R15: 0000000000022000
</TASK>
The khugepaged code would pick up the node with the most hit as the preferred
node, and also tries to do some balance if several nodes have the same
hit record. Basically it does conceptually:
* If the target_node <= last_target_node, then iterate from
last_target_node + 1 to MAX_NUMNODES (1024 on default config)
* If the max_value == node_load[nid], then target_node = nid
But there is a corner case, paritucularly for MADV_COLLAPSE, that the
non-existing node may be returned as preferred node.
Assuming the system has 2 nodes, the target_node is 0 and the
last_target_node is 1, if MADV_COLLAPSE path is hit, the max_value may
be 0, then it may return 2 for target_node, but it is actually not
existing (offline), so the warn is triggered.
The node balance was introduced by commit 9f1b868a13ac ("mm: thp:
khugepaged: add policy for finding target node") to satisfy
"numactl --interleave=all". But interleaving is a mere hint rather than
something that has hard requirements.
So use nodemask to record the nodes which have the same hit record, the
hugepage allocation could fallback to those nodes. And remove
__GFP_THISNODE since it does disallow fallback. And if the nodemask
just has one node set, it means there is one single node has the most
hit record, the nodemask approach actually behaves like __GFP_THISNODE.
Link: https://lkml.kernel.org/r/20221108184357.55614-2-shy828301@gmail.com
Fixes: 7d8faaf15545 ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Suggested-by: Zach O'Keefe <zokeefe@google.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reported-by: <syzbot+0044b22d177870ee974f@syzkaller.appspotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During proactive reclaim, we sometimes observe severe overreclaim, with
several thousand times more pages reclaimed than requested.
This trace was obtained from shrink_lruvec() during such an instance:
prio:0 anon_cost:1141521 file_cost:7767
nr_reclaimed:4387406 nr_to_reclaim:1047 (or_factor:4190)
nr=[7161123 345 578 1111]
While he reclaimer requested 4M, vmscan reclaimed close to 16G, most of it
by swapping. These requests take over a minute, during which the write()
to memory.reclaim is unkillably stuck inside the kernel.
Digging into the source, this is caused by the proportional reclaim
bailout logic. This code tries to resolve a fundamental conflict: to
reclaim roughly what was requested, while also aging all LRUs fairly and
in accordance to their size, swappiness, refault rates etc. The way it
attempts fairness is that once the reclaim goal has been reached, it stops
scanning the LRUs with the smaller remaining scan targets, and adjusts the
remainder of the bigger LRUs according to how much of the smaller LRUs was
scanned. It then finishes scanning that remainder regardless of the
reclaim goal.
This works fine if priority levels are low and the LRU lists are
comparable in size. However, in this instance, the cgroup that is
targeted by proactive reclaim has almost no files left - they've already
been squeezed out by proactive reclaim earlier - and the remaining anon
pages are hot. Anon rotations cause the priority level to drop to 0,
which results in reclaim targeting all of anon (a lot) and all of file
(almost nothing). By the time reclaim decides to bail, it has scanned
most or all of the file target, and therefor must also scan most or all of
the enormous anon target. This target is thousands of times larger than
the reclaim goal, thus causing the overreclaim.
The bailout code hasn't changed in years, why is this failing now? The
most likely explanations are two other recent changes in anon reclaim:
1. Before the series starting with commit 5df741963d52 ("mm: fix LRU
balancing effect of new transparent huge pages"), the VM was
overall relatively reluctant to swap at all, even if swap was
configured. This means the LRU balancing code didn't come into play
as often as it does now, and mostly in high pressure situations
where pronounced swap activity wouldn't be as surprising.
2. For historic reasons, shrink_lruvec() loops on the scan targets of
all LRU lists except the active anon one, meaning it would bail if
the only remaining pages to scan were active anon - even if there
were a lot of them.
Before the series starting with commit ccc5dc67340c ("mm/vmscan:
make active/inactive ratio as 1:1 for anon lru"), most anon pages
would live on the active LRU; the inactive one would contain only a
handful of preselected reclaim candidates. After the series, anon
gets aged similarly to file, and the inactive list is the default
for new anon pages as well, making it often the much bigger list.
As a result, the VM is now more likely to actually finish large
anon targets than before.
Change the code such that only one SWAP_CLUSTER_MAX-sized nudge toward the
larger LRU lists is made before bailing out on a met reclaim goal.
This fixes the extreme overreclaim problem.
Fairness is more subtle and harder to evaluate. No obvious misbehavior
was observed on the test workload, in any case. Conceptually, fairness
should primarily be a cumulative effect from regular, lower priority
scans. Once the VM is in trouble and needs to escalate scan targets to
make forward progress, fairness needs to take a backseat. This is also
acknowledged by the myriad exceptions in get_scan_count(). This patch
makes fairness decrease gradually, as it keeps fairness work static over
increasing priority levels with growing scan targets. This should make
more sense - although we may have to re-visit the exact values.
Link: https://lkml.kernel.org/r/20220802162811.39216-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The Chinese translation of FPRs Note is not consistent with the original
English version, $v0/$v1 should be $fv0/$fv1, $a0/$a1 should be $fa0/$fa1,
fix them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Drop the request queue reference just acquired when __alloc_disk_node
failed.
Fixes: 6f8191fdf41d ("block: simplify disk shutdown")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221122072753.426077-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We face some regressions on a few IXP42x systems when
accessing flash, the following unrelated error prints
appear from the PCI driver:
ixp4xx-pci c0000000.pci: PCI: abort_handler addr = 0xff9ffb5f,
isr = 0x0, status = 0x22a0
ixp4xx-pci c0000000.pci: imprecise abort
(...)
It turns out that while bit 7 is masked "reserved" it is
not unused, so masking it off as zero is dangerous, and
breaks flash access on some systems such as the NSLU2.
Be more careful and avoid masking off any of the reserved
bits 7, 8, 9 or 30. Only keep masking EXP_WORD (bit 2)
on IXP43x which is necessary in some setups.
Fixes: 1c953bda90ca ("bus: ixp4xx: Add a driver for IXP4xx expansion bus")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221122134411.2030372-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After commit cbfecb927f42 ("fs: record I_DIRTY_TIME even if inode
already has I_DIRTY_INODE") writeback_single_inode can push inode with
I_DIRTY_TIME set to b_dirty_time list. In case of freeing inode with
I_DIRTY_TIME set this can happen after deletion of inode from i_io_list
at evict. Stack trace is following.
evict
fat_evict_inode
fat_truncate_blocks
fat_flush_inodes
writeback_inode
sync_inode_metadata(inode, sync=0)
writeback_single_inode(inode, wbc) <- wbc->sync_mode == WB_SYNC_NONE
This will lead to use after free in flusher thread.
Similar issue can be triggered if writeback_single_inode in the
stack trace update inode->i_io_list. Add explicit check to avoid it.
Fixes: cbfecb927f42 ("fs: record I_DIRTY_TIME even if inode already has I_DIRTY_INODE")
Reported-by: syzbot+6ba92bd00d5093f7e371@syzkaller.appspotmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Svyatoslav Feldsherov <feldsherov@google.com>
Link: https://lore.kernel.org/r/20221115202001.324188-1-feldsherov@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
nf_flow_table_block_setup and the driver TC_SETUP_FT call can modify the flow
block cb list while they are being traversed elsewhere, causing a crash.
Add a write lock around the calls to protect readers
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The commit 510841da1fcc ("netfilter: ipset: enforce documented limit to
prevent allocating huge memory") was too strict and prevented to add up to
64 clashing elements to a hash:net,iface type of set. This patch fixes the
issue and now the type behaves as documented.
Fixes: 510841da1fcc ("netfilter: ipset: enforce documented limit to prevent allocating huge memory")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new amd pstate driver command line option to enable driver passive
working mode via MSR and shared memory interface to request desired
performance within abstract scale and the power management firmware
(SMU) convert the perf requests into actual hardware pstates.
Also the `disable` parameter can disable the pstate driver loading by
adding `amd_pstate=disable` to kernel command line.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce the `amd_pstate` driver new working mode with
`amd_pstate=passive` added to kernel command line.
If there is no passive mode enabled by user, amd_pstate driver will be
disabled by default for now.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When the amd_pstate driver is built-in users still need a method to be
able enable or disable it depending upon their circumstance.
Add support for an early parameter to do this.
There is some performance degradation on a number of ASICs in the
passive mode. This performance issue was originally discovered in
shared memory systems but it has been proven that certain workloads
on MSR systems also suffer performance issues.
Set the amd-pstate driver as disabled by default to temporarily
mitigate the performance problem.
1) with `amd_pstate=disable`, pstate driver will be disabled to load at
kernel booting.
2) with `amd_pstate=passive`, pstate driver will be enabled and loaded
as non-autonomous working mode supported in the low-level power
management firmware.
3) If neither parameter is specified, the driver will be disabled by
default to avoid triggering performance regressions in certain ASICs
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently when the amd-pstate and acpi_cpufreq are both built into
kernel as module driver, amd-pstate will not be loaded by default
in this case.
Change amd-pstate driver as built-in type, it will resolve the loading
sequence problem to allow user to make amd-pstate driver as the default
cpufreq scaling driver.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
init
MSR_AMD_PERF_CTL is guaranteed to be 0 on a cold boot. However, on a
kexec boot, for instance, it may have a non-zero value (if the cpu was
in a non-P0 Pstate). In such cases, the cores with non-P0 Pstates at
boot will never be pushed to P0, let alone boost frequencies.
Kexec is a common workflow for reboot on Linux and this creates a
regression in performance. Fix it by explicitly setting the
MSR_AMD_PERF_CTL to 0 during amd_pstate driver init.
Cc: All applicable <stable@vger.kernel.org>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit 6d5afdc97ea71958287364a1f1d07e59ef151b11.
On a Pixel 6 device, it is observed that this commit increases
latency by approximately 50ms, or 20%, in migrating a task
that requires full CPU utilization from a LITTLE CPU to Fmax
on a big CPU. Reverting this change restores the latency back
to its original baseline value.
Fixes: 6d5afdc97ea7 ("cpufreq: schedutil: Move max CPU capacity to sugov_policy")
Signed-off-by: Sam Wu <wusamuel@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The blamed commit introduced the following smatch warning in the
function lan9662_otp_wait_flag_clear:
drivers/nvmem/lan9662-otpc.c:43 lan9662_otp_wait_flag_clear() warn: signedness bug returning '(-110)'
Fix this by changing the return type of the function
lan9662_otp_wait_flag_clear() to be int instead of bool.
Fixes: 9e8f208ad5229d ("nvmem: lan9662-otp: add support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063840.6357-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case of error, the function memremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063840.6357-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fix for v6.1-rc
This contains a tiny fix to align the driver compatible string in the
binding documentation with the one used in DTS.
- dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
"3rd set of IIO fixes for the 6.1 cycle.
Usual mixed bunch of driver fixes.
* sw-triggers
- Fix failure to cleanup up list registration in an error path.
* aspeed,adc
- Drop the trim valid dts property as it doesn't account for unprogrammed
OTP and that can be easily detected without it.
* avago,apds9960:
- Fix register address for gesture gain.
* bosch,bma400
- Fix a memory leak in an error path.
* rohm,rpr0521
- Fix missing dependency on IIO_BUFFER/IIO_TRIGGERED_BUFFER.
* ti,afe4403/4404
- Fix out of band read by moving reads down to where they are
used."
* tag 'iio-fixes-for-6.1c' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
iio: adc: aspeed: Remove the trim valid dts property.
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
iio: light: rpr0521: add missing Kconfig dependencies
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
iio: health: afe4403: Fix oob read in afe4403_read_raw
iio: light: apds9960: fix wrong register for gesture gain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into work-linus
Xu writes:
FPGA Manager changes for 6.1-final
Intel m10 bmc secure update
- Russ's change fixes Kconfig dependencies
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-6.1 branch)
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: m10bmc-sec: Fix kconfig dependencies
|
|
Patch modifies the TD_SIZE in TRB before ZLP TRB.
The TD_SIZE in TRB before ZLP TRB must be set to 1 to force
processing ZLP TRB by controller.
cc: <stable@vger.kernel.org>
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20221115092218.421267-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Until the endpoint is disabled, its descriptors should remain valid.
When its requests are removed from ep disable, the request completion
routine may attempt to access the endpoint's descriptor. Don't clear the
descriptors before that.
Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/45db7c83b209259115bf652af210f8b2b3b1a383.1668561364.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The core DWC3 device node was not properly removed by the custom
dwc3_exynos_remove_child() function. Replace it with generic
of_platform_depopulate() which does that job right.
Fixes: adcf20dcd262 ("usb: dwc3: exynos: Use of_platform API to create dwc3 core pdev")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20221110154131.2577-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During handling Clear Halt Endpoint Feature request, driver invokes
Reset Endpoint command. Because this command has some issue with
transition endpoint from Running to Idle state the driver must
stop the endpoint by using Stop Endpoint command.
cc: <stable@vger.kernel.org>
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20221110063005.370656-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If there's a disconnection while operating in eSS, there may be a delay
in VBUS drop response from the connector. In that case, the internal
link state may drop to operate in usb2 speed while the controller thinks
the VBUS is still high. The driver must make sure to disable
GUSB2PHYCFG.SUSPHY when sending endpoint command while in usb2 speed.
The End Transfer command may be called, and only that command needs to
go through at this point. Let's keep it simple and unconditionally
disable GUSB2PHYCFG.SUSPHY whenever we issue the command.
This scenario is not seen in real hardware. In a rare case, our
prototype type-c controller/interface may have a slow response
triggerring this issue.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/5651117207803c26e2f22ddf4e5ce9e865dcf7c7.1668045468.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since e219a712bc06 (usb: gadget: uvc: add v4l2 try_format api call) the
try_format function is available. With this function includes checks for
valid configurations programmed in the configfs. We use this function to
ensure to return valid values on the set_format callback.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Fixes: e219a712bc06 ("usb: gadget: uvc: add v4l2 try_format api call")
Link: https://lore.kernel.org/r/20221026182240.363055-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A kernel built with syzbot's config file reported that
scr_memcpyw(q, save, array3_size(logo_lines, new_cols, 2))
causes uninitialized "save" to be copied.
----------
[drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
Console: switching to colour frame buffer device 128x48
=====================================================
BUG: KMSAN: uninit-value in do_update_region+0x4b8/0xba0
do_update_region+0x4b8/0xba0
update_region+0x40d/0x840
fbcon_switch+0x3364/0x35e0
redraw_screen+0xae3/0x18a0
do_bind_con_driver+0x1cb3/0x1df0
do_take_over_console+0x11cb/0x13f0
fbcon_fb_registered+0xacc/0xfd0
register_framebuffer+0x1179/0x1320
__drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
drm_fbdev_client_hotplug+0xbea/0xda0
drm_fbdev_generic_setup+0x65e/0x9d0
vkms_init+0x9f3/0xc76
(...snipped...)
Uninit was stored to memory at:
fbcon_prepare_logo+0x143b/0x1940
fbcon_init+0x2c1b/0x31c0
visual_init+0x3e7/0x820
do_bind_con_driver+0x14a4/0x1df0
do_take_over_console+0x11cb/0x13f0
fbcon_fb_registered+0xacc/0xfd0
register_framebuffer+0x1179/0x1320
__drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
drm_fbdev_client_hotplug+0xbea/0xda0
drm_fbdev_generic_setup+0x65e/0x9d0
vkms_init+0x9f3/0xc76
(...snipped...)
Uninit was created at:
__kmem_cache_alloc_node+0xb69/0x1020
__kmalloc+0x379/0x680
fbcon_prepare_logo+0x704/0x1940
fbcon_init+0x2c1b/0x31c0
visual_init+0x3e7/0x820
do_bind_con_driver+0x14a4/0x1df0
do_take_over_console+0x11cb/0x13f0
fbcon_fb_registered+0xacc/0xfd0
register_framebuffer+0x1179/0x1320
__drm_fb_helper_initial_config_and_unlock+0x23ad/0x2b40
drm_fbdev_client_hotplug+0xbea/0xda0
drm_fbdev_generic_setup+0x65e/0x9d0
vkms_init+0x9f3/0xc76
(...snipped...)
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc4-00356-g8f2975c2bb4c #924
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
----------
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/cad03d25-0ea0-32c4-8173-fd1895314bce@I-love.SAKURA.ne.jp
|
|
If PTP synchronisation is done every second, then sporadic the interval
is higher than one second:
ptp4l[696.582]: master offset -17 s2 freq -1891 path delay 573
ptp4l[697.582]: master offset -22 s2 freq -1901 path delay 573
ptp4l[699.368]: master offset -1 s2 freq -1887 path delay 573
^^^^^^^ Should be 698.582!
This problem is caused by rotten packets, which are received after
polling but before interrupts are enabled again. This can be fixed by
checking for pending work and rescheduling if necessary after interrupts
has been enabled again.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20221119211825.81805-1-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When using dash as /bin/sh, the CC_HAS_ASM_GOTO_TIED_OUTPUT test fails
with a syntax error which is not the one we are looking for:
<stdin>: In function ‘foo’:
<stdin>:1:29: warning: missing terminating " character
<stdin>:1:29: error: missing terminating " character
<stdin>:2:5: error: expected ‘:’ before ‘+’ token
<stdin>:2:7: warning: missing terminating " character
<stdin>:2:7: error: missing terminating " character
<stdin>:2:5: error: expected declaration or statement at end of input
Removing '\n' solves this.
Fixes: 1aa0e8b144b6 ("Kconfig: Add option for asm goto w/ tied outputs to workaround clang-13 bug")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Racing conflict could be:
task A task B
list_for_each_entry
strcmp(h->name))
list_for_each_entry
strcmp(h->name)
kzalloc kzalloc
...... .....
device_create device_create
list_add
list_add
The root cause is that task B has no idea about the fact someone
else(A) has inserted heap with same name when it calls list_add,
so a potential collision occurs.
Fixes: c02a81fba74f ("dma-buf: Add dma-buf heaps framework")
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/TYCP286MB2323873BBDF88020781FB986CA3B9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
|
|
Commit 4581dd480c9e ("net: octeontx2-pf: mcs: consider MACSEC setting")
has already added "depends on MACSEC || !MACSEC", so remove it.
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221119133616.3583538-1-zhengbin13@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). Call pci_dev_put() before returning from
bnx2x_vf_is_pcie_pending() to avoid refcount leak.
Fixes: b56e9670ffa4 ("bnx2x: Prepare device and initialize VF database")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221119070202.1407648-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Status is reported as always off in the 6032 case. Status
reporting now matches the logic in the setters. Once of
the differences to the 6030 is that there are no groups,
therefore the state needs to be read out in the lower bits.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221120221208.3093727-3-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In former times, info->feature was populated via the parent driver
by pdata/regulator_init_data->driver_data for all regulators when
USB_PRODUCT_ID_LSB indicates a TWL6032.
Today, the information is not set, so re-add it at the regulator
definitions.
Fixes: 25d82337705e2 ("regulator: twl: make driver DT only")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221120221208.3093727-2-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add NULL check in dpcm_be_reparent API, to handle
kernel NULL pointer dereference error.
The issue occurred in fuzzing test.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1669098673-29703-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Syzbot reported a memory leak about skb:
unreferenced object 0xffff88810e144e00 (size 240):
comm "syz-executor284", pid 3701, jiffies 4294952403 (age 12.620s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff83ab79a9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:497
[<ffffffff82a5cf64>] alloc_skb include/linux/skbuff.h:1267 [inline]
[<ffffffff82a5cf64>] virtual_ncidev_write+0x24/0xe0 drivers/nfc/virtual_ncidev.c:116
[<ffffffff815f6503>] do_loop_readv_writev fs/read_write.c:759 [inline]
[<ffffffff815f6503>] do_loop_readv_writev fs/read_write.c:743 [inline]
[<ffffffff815f6503>] do_iter_write+0x253/0x300 fs/read_write.c:863
[<ffffffff815f66ed>] vfs_writev+0xdd/0x240 fs/read_write.c:934
[<ffffffff815f68f6>] do_writev+0xa6/0x1c0 fs/read_write.c:977
[<ffffffff848802d5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff848802d5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84a00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
In nci_rx_data_packet(), if we don't get a valid conn_info, we will return
directly but forget to release the skb.
Reported-by: syzbot+cdb9a427d1bc08815104@syzkaller.appspotmail.com
Fixes: 4aeee6871e8c ("NFC: nci: Add dynamic logical connections support")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221118082419.239475-1-liushixin2@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Current code re-calculates the size after aligning the starting and
ending physical addresses on a page boundary. But the re-calculation
also embeds the masking of high order bits that exceed the size of
the physical address space (via PHYSICAL_PAGE_MASK). If the masking
removes any high order bits, the size calculation results in a huge
value that is likely to immediately fail.
Fix this by re-calculating the page-aligned size first. Then mask any
high order bits using PHYSICAL_PAGE_MASK.
Fixes: ffa71f33a820 ("x86, ioremap: Fix incorrect physical address handling in PAE mode")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/1668624097-14884-2-git-send-email-mikelley@microsoft.com
|
|
In commit f11fe1dae1c4 ("net/sched: Make NET_ACT_CT depends on NF_NAT"),
it fixed the build failure when NF_NAT is m and NET_ACT_CT is y by
adding depends on NF_NAT for NET_ACT_CT. However, it would also cause
NET_ACT_CT cannot be built without NF_NAT, which is not expected. This
patch fixes it by changing to use "(!NF_NAT || NF_NAT)" as the depend.
Fixes: f11fe1dae1c4 ("net/sched: Make NET_ACT_CT depends on NF_NAT")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/b6386f28d1ba34721795fb776a91cbdabb203447.1668807183.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If phylink_of_phy_connect() fails, the port should be disabled.
If sparx5_serdes_set()/phy_power_on() fails, the port should be
disabled and the phylink should be stopped and disconnected.
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Tested-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20221117125918.203997-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The __ef100_hard_start_xmit() returns NETDEV_TX_OK without freeing skb
in error handling case, add dev_kfree_skb_any() to fix it.
Fixes: 51b35a454efd ("sfc: skeleton EF100 PF driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1668671409-10909-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
acpi_evaluate_dsm() should be coupled with ACPI_FREE() to free the ACPI
memory, because we need to track the allocation of acpi_object when
ACPI_DBG_TRACK_ALLOCATIONS enabled, so use ACPI_FREE() instead of kfree().
Fixes: d38a648d2d6c ("net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221118062447.2324881-1-bobo.shaobowang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
drm-intel-fixes
gvt-fixes-2022-11-11
- kvm reference fix from Sean
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111090208.GQ30028@zhen-hp.sh.intel.com
|
|
When IPv6 module initializing in xfrm6_init(), register_pernet_subsys()
is possible to fail but its return value is ignored.
If IPv6 initialization fails later and xfrm6_fini() is called,
removing uninitialized list in xfrm6_net_ops will cause null-ptr-deref:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 330 Comm: insmod
RIP: 0010:unregister_pernet_operations+0xc9/0x450
Call Trace:
<TASK>
unregister_pernet_subsys+0x31/0x3e
xfrm6_fini+0x16/0x30 [ipv6]
ip6_route_init+0xcd/0x128 [ipv6]
inet6_init+0x29c/0x602 [ipv6]
...
Fix it by catching the error return value of register_pernet_subsys().
Fixes: 8d068875caca ("xfrm: make gc_thresh configurable in all namespaces")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Kernel 5.14 added a new "byseq" index to speed
up xfrm_state lookups by sequence number in commit
fe9f1d8779cb ("xfrm: add state hashtable keyed by seq")
While the patch was thorough, the function pfkey_send_new_mapping()
in net/af_key.c also modifies x->km.seq and never added
the current xfrm_state to the "byseq" index.
This leads to the following kernel Ooops:
BUG: kernel NULL pointer dereference, address: 0000000000000000
..
RIP: 0010:__xfrm_state_delete+0xc9/0x1c0
..
Call Trace:
<TASK>
xfrm_state_delete+0x1e/0x40
xfrm_del_sa+0xb0/0x110 [xfrm_user]
xfrm_user_rcv_msg+0x12d/0x270 [xfrm_user]
? remove_entity_load_avg+0x8a/0xa0
? copy_to_user_state_extra+0x580/0x580 [xfrm_user]
netlink_rcv_skb+0x51/0x100
xfrm_netlink_rcv+0x30/0x50 [xfrm_user]
netlink_unicast+0x1a6/0x270
netlink_sendmsg+0x22a/0x480
__sys_sendto+0x1a6/0x1c0
? __audit_syscall_entry+0xd8/0x130
? __audit_syscall_exit+0x249/0x2b0
__x64_sys_sendto+0x23/0x30
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
Exact location of the crash in __xfrm_state_delete():
if (x->km.seq)
hlist_del_rcu(&x->byseq);
The hlist_node "byseq" was never populated.
The bug only triggers if a new NAT traversal mapping (changed IP or port)
is detected in esp_input_done2() / esp6_input_done2(), which in turn
indirectly calls pfkey_send_new_mapping() *if* the kernel is compiled
with CONFIG_NET_KEY and "af_key" is active.
The PF_KEYv2 message SADB_X_NAT_T_NEW_MAPPING is not part of RFC 2367.
Various implementations have been examined how they handle
the "sadb_msg_seq" header field:
- racoon (Android): does not process SADB_X_NAT_T_NEW_MAPPING
- strongswan: does not care about sadb_msg_seq
- openswan: does not care about sadb_msg_seq
There is no standard how PF_KEYv2 sadb_msg_seq should be populated
for SADB_X_NAT_T_NEW_MAPPING and it's not used in popular
implementations either. Herbert Xu suggested we should just
use the current km.seq value as is. This fixes the root cause
of the oops since we no longer modify km.seq itself.
The update of "km.seq" looks like a copy'n'paste error
from pfkey_send_acquire(). SADB_ACQUIRE must indeed assign a unique km.seq
number according to RFC 2367. It has been verified that code paths
involving pfkey_send_acquire() don't cause the same Oops.
PF_KEYv2 SADB_X_NAT_T_NEW_MAPPING support was originally added here:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
commit cbc3488685b20e7b2a98ad387a1a816aada569d8
Author: Derek Atkins <derek@ihtfp.com>
AuthorDate: Wed Apr 2 13:21:02 2003 -0800
[IPSEC]: Implement UDP Encapsulation framework.
In particular, implement ESPinUDP encapsulation for IPsec
Nat Traversal.
A note on triggering the bug: I was not able to trigger it using VMs.
There is one VPN using a high latency link on our production VPN server
that triggered it like once a day though.
Link: https://github.com/strongswan/strongswan/issues/992
Link: https://lore.kernel.org/netdev/00959f33ee52c4b3b0084d42c430418e502db554.1652340703.git.antony.antony@secunet.com/T/
Link: https://lore.kernel.org/netdev/20221027142455.3975224-1-chenzhihao@meizu.com/T/
Fixes: fe9f1d8779cb ("xfrm: add state hashtable keyed by seq")
Reported-by: Roth Mark <rothm@mail.com>
Reported-by: Zhihao Chen <chenzhihao@meizu.com>
Tested-by: Roth Mark <rothm@mail.com>
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Acked-by: Antony Antony <antony.antony@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
There is a race between modprobe and mount as below:
modprobe zonefs | mount -t zonefs
--------------------------------|-------------------------
zonefs_init |
register_filesystem [1] |
| zonefs_fill_super [2]
zonefs_sysfs_init [3] |
1. register zonefs suceess, then
2. user can mount the zonefs
3. if sysfs initialize failed, the module initialize failed.
Then the mount process maybe some error happened since the module
initialize failed.
Let's register zonefs after all dependency resource ready. And
reorder the dependency resource release in module exit.
Fixes: 9277a6d4fbd4 ("zonefs: Export open zone resource information through sysfs")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Commit 1229b33973c7 ("ice: Add low latency Tx timestamp read") refactored
PTP timestamping logic to use a threaded IRQ instead of a separate kthread.
This implementation introduced ice_misc_intr_thread_fn and redefined the
ice_ptp_process_ts function interface to return a value of whether or not
the timestamp processing was complete.
ice_misc_intr_thread_fn would take the return value from ice_ptp_process_ts
and convert it into either IRQ_HANDLED if there were no more timestamps to
be processed, or IRQ_WAKE_THREAD if the thread should continue processing.
This is not correct, as the kernel does not re-schedule threaded IRQ
functions automatically. IRQ_WAKE_THREAD can only be used by the main IRQ
function.
This results in the ice_ptp_process_ts function (and in turn the
ice_ptp_tx_tstamp function) from only being called exactly once per
interrupt.
If an application sends a burst of Tx timestamps without waiting for a
response, the interrupt will trigger for the first timestamp. However,
later timestamps may not have arrived yet. This can result in dropped or
discarded timestamps. Worse, on E822 hardware this results in the interrupt
logic getting stuck such that no future interrupts will be triggered. The
result is complete loss of Tx timestamp functionality.
Fix this by modifying the ice_misc_intr_thread_fn to perform its own
polling of the ice_ptp_process_ts function. We sleep for a few microseconds
between attempts to avoid wasting significant CPU time. The value was
chosen to allow time for the Tx timestamps to complete without wasting so
much time that we overrun application wait budgets in the worst case.
The ice_ptp_process_ts function also currently returns false in the event
that the Tx tracker is not initialized. This would result in the threaded
IRQ handler never exiting if it gets started while the tracker is not
initialized.
Fix the function to appropriately return true when the tracker is not
initialized.
Note that this will not reproduce with default ptp4l behavior, as the
program always synchronously waits for a timestamp response before sending
another timestamp request.
Reported-by: Siddaraju DH <siddaraju.dh@intel.com>
Fixes: 1229b33973c7 ("ice: Add low latency Tx timestamp read")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20221118222729.1565317-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If skb_linearize() fails in tipc_disc_rcv(), we need to free the skb instead of
handle it.
Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20221119072832.7896-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-18 (iavf)
Ivan Vecera resolves issues related to reset by adding back call to
netif_tx_stop_all_queues() and adding calls to dev_close() to ensure
device is properly closed during reset.
Stefan Assmann removes waiting for setting of MAC address as this breaks
ARP.
Slawomir adds setting of __IAVF_IN_REMOVE_TASK bit to prevent deadlock
between remove and shutdown.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix race condition between iavf_shutdown and iavf_remove
iavf: remove INITIAL_MAC_SET to allow gARP to work properly
iavf: Do not restart Tx queues after reset task failure
iavf: Fix a crash during reset task
====================
Link: https://lore.kernel.org/r/20221118222439.1565245-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xin Long says:
====================
tipc: fix two race issues in tipc_conn_alloc
The race exists beteen tipc_topsrv_accept() and tipc_conn_close(),
one is allocating the con while the other is freeing it and there
is no proper lock protecting it. Therefore, a null-pointer-defer
and a use-after-free may be triggered, see details on each patch.
====================
Link: https://lore.kernel.org/r/cover.1668807842.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One extra conn_get() is needed in tipc_conn_alloc(), as after
tipc_conn_alloc() is called, tipc_conn_close() may free this
con before deferencing it in tipc_topsrv_accept():
tipc_conn_alloc();
newsk = newsock->sk;
<---- tipc_conn_close();
write_lock_bh(&sk->sk_callback_lock);
newsk->sk_data_ready = tipc_conn_data_ready;
Then an uaf issue can be triggered:
BUG: KASAN: use-after-free in tipc_topsrv_accept+0x1e7/0x370 [tipc]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x46
print_report+0x178/0x4b0
kasan_report+0x8c/0x100
kasan_check_range+0x179/0x1e0
tipc_topsrv_accept+0x1e7/0x370 [tipc]
process_one_work+0x6a3/0x1030
worker_thread+0x8a/0xdf0
This patch fixes it by holding it in tipc_conn_alloc(), then after
all accessing in tipc_topsrv_accept() releasing it. Note when does
this in tipc_topsrv_kern_subscr(), as tipc_conn_rcv_sub() returns
0 or -1 only, we don't need to check for "> 0".
Fixes: c5fa7b3cf3cb ("tipc: introduce new TIPC server infrastructure")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A crash was reported by Wei Chen:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:tipc_conn_close+0x12/0x100
Call Trace:
tipc_topsrv_exit_net+0x139/0x320
ops_exit_list.isra.9+0x49/0x80
cleanup_net+0x31a/0x540
process_one_work+0x3fa/0x9f0
worker_thread+0x42/0x5c0
It was caused by !con->sock in tipc_conn_close(). In tipc_topsrv_accept(),
con is allocated in conn_idr then its sock is set:
con = tipc_conn_alloc();
... <----[1]
con->sock = newsock;
If tipc_conn_close() is called in anytime of [1], the null-pointer-def
is triggered by con->sock->sk due to con->sock is not yet set.
This patch fixes it by moving the con->sock setting to tipc_conn_alloc()
under s->idr_lock. So that con->sock can never be NULL when getting the
con from s->conn_idr. It will be also safer to move con->server and flag
CF_CONNECTED setting under s->idr_lock, as they should all be set before
tipc_conn_alloc() is called.
Fixes: c5fa7b3cf3cb ("tipc: introduce new TIPC server infrastructure")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix to return a negative error code from the ccr read error handling
case instead of 0, as done elsewhere in this function.
Fixes: 3265f4218878 ("net: phy: at803x: add fiber support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221118103635.254256-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
update routine
Currenty extended packet number (EPN) update routine is accessing
macsec object without holding the general macsec lock hence facing
a possible race condition when an EPN update occurs while updating
or deleting the SA.
Fix by holding the general macsec lock before accessing the object.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently updating SecY destroys and re-creates RX SA objects,
the re-created RX SA objects are not identical to the destroyed
objects and it disagree on the encryption enabled property which
holds the value false after recreation, this value is not
supported with offload which leads to no traffic after an update.
Fix by recreating an identical objects.
Fixes: 5a39816a75e5 ("net/mlx5e: Add MACsec offload SecY support")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently as part of MACsec SA initialization routine
extended packet number (EPN) object attribute is always
being set without checking if EPN is actually enabled,
the above could lead to a NULL dereference.
Fix by adding such a check.
Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before the cited commit, for N channels, a dedicated set of N queues was
created to support XSK, in indices [N, 2N-1], doubling the number of
queues.
In addition, changing the number of channels was prohibited, as it would
shift the indices.
Remove these two leftovers, as we moved XSK to a new queueing scheme,
starting from index 0.
Fixes: 3db4c85cde7a ("net/mlx5e: xsk: Use queue indices starting from 0 for XSK queues")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit adds a for loop to support multiple encapsulations.
But it only checks if the last encap is valid.
Fix it by setting slow path flag when one of the encap is invalid.
Fixes: f493f15534ec ("net/mlx5e: Move flow attr reformat action bit to per dest flags")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the cited patch, an alignment required by the HW spec was mistakenly
dropped. Bring it back to fix error completions like the below:
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x40b, ci 0x0, qn 0x104f, opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 86 00 68 02 25 00 10 4f 00 00 bb d2
WQE DUMP: WQ size 1024 WQ cur size 0, WQE index 0x0, len: 192
00000000: 00 00 00 25 00 10 4f 0c 00 00 00 00 00 18 2e 00
00000010: 90 00 00 00 00 02 00 00 00 00 00 00 20 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000080: 08 00 00 00 48 6a 00 02 08 00 00 00 0e 10 00 02
00000090: 08 00 00 00 0c db 00 02 08 00 00 00 0e 82 00 02
000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Fixes: 9f123f740428 ("net/mlx5e: Improve MTT/KSM alignment")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When sync reset now event handling fails on mlx5_pci_link_toggle() then
no reset was done. However, since mlx5_cmd_fast_teardown_hca() was
already done, the firmware function is closed and the driver is left
without firmware functionality.
Fix it by setting device error state and reopen the firmware resources.
Reopening is done by the thread that was called for devlink reload
fw_activate as it already holds the devlink lock.
Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit moved from using reformat_id integer to packet_reformat
pointer which introduced the possibility to null pointer dereference.
When setting packet reformat flag and pkt_reformat pointer must
exists so checking MLX5_ESW_DEST_ENCAP is not enough, we need
to make sure the pkt_reformat is valid and check for MLX5_ESW_DEST_ENCAP_VALID.
If the dest encap valid flag does not exists then pkt_reformat can be
either invalid address or null.
Also, to make sure we don't try to access invalid pkt_reformat set it to
null when invalidated and invalidate it before calling add flow code as
its logically more correct and to be safe.
Fixes: 2b688ea5efde ("net/mlx5: Add flow steering actions to fs_cmd shim layer")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
ldev->lock is used to serialize lag change operations. Since multiport
eswtich functionality was added, we now change the mode dynamically.
However, acquiring ldev->lock is not allowed as it could possibly lead
to a deadlock as reported by the lockdep mechanism.
[ 836.154963] WARNING: possible circular locking dependency detected
[ 836.155850] 5.19.0-rc5_net_56b7df2 #1 Not tainted
[ 836.156549] ------------------------------------------------------
[ 836.157418] handler1/12198 is trying to acquire lock:
[ 836.158178] ffff888187d52b58 (&ldev->lock){+.+.}-{3:3}, at: mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.159575]
[ 836.159575] but task is already holding lock:
[ 836.160474] ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[ 836.161669] which lock already depends on the new lock.
[ 836.162905]
[ 836.162905] the existing dependency chain (in reverse order) is:
[ 836.164008] -> #3 (&block->cb_lock){++++}-{3:3}:
[ 836.164946] down_write+0x25/0x60
[ 836.165548] tcf_block_get_ext+0x1c6/0x5d0
[ 836.166253] ingress_init+0x74/0xa0 [sch_ingress]
[ 836.167028] qdisc_create.constprop.0+0x130/0x5e0
[ 836.167805] tc_modify_qdisc+0x481/0x9f0
[ 836.168490] rtnetlink_rcv_msg+0x16e/0x5a0
[ 836.169189] netlink_rcv_skb+0x4e/0xf0
[ 836.169861] netlink_unicast+0x190/0x250
[ 836.170543] netlink_sendmsg+0x243/0x4b0
[ 836.171226] sock_sendmsg+0x33/0x40
[ 836.171860] ____sys_sendmsg+0x1d1/0x1f0
[ 836.172535] ___sys_sendmsg+0xab/0xf0
[ 836.173183] __sys_sendmsg+0x51/0x90
[ 836.173836] do_syscall_64+0x3d/0x90
[ 836.174471] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 836.175282]
[ 836.175282] -> #2 (rtnl_mutex){+.+.}-{3:3}:
[ 836.176190] __mutex_lock+0x6b/0xf80
[ 836.176830] register_netdevice_notifier+0x21/0x120
[ 836.177631] rtnetlink_init+0x2d/0x1e9
[ 836.178289] netlink_proto_init+0x163/0x179
[ 836.178994] do_one_initcall+0x63/0x300
[ 836.179672] kernel_init_freeable+0x2cb/0x31b
[ 836.180403] kernel_init+0x17/0x140
[ 836.181035] ret_from_fork+0x1f/0x30
[ 836.181687] -> #1 (pernet_ops_rwsem){+.+.}-{3:3}:
[ 836.182628] down_write+0x25/0x60
[ 836.183235] unregister_netdevice_notifier+0x1c/0xb0
[ 836.184029] mlx5_ib_roce_cleanup+0x94/0x120 [mlx5_ib]
[ 836.184855] __mlx5_ib_remove+0x35/0x60 [mlx5_ib]
[ 836.185637] mlx5_eswitch_unregister_vport_reps+0x22f/0x440 [mlx5_core]
[ 836.186698] auxiliary_bus_remove+0x18/0x30
[ 836.187409] device_release_driver_internal+0x1f6/0x270
[ 836.188253] bus_remove_device+0xef/0x160
[ 836.188939] device_del+0x18b/0x3f0
[ 836.189562] mlx5_rescan_drivers_locked+0xd6/0x2d0 [mlx5_core]
[ 836.190516] mlx5_lag_remove_devices+0x69/0xe0 [mlx5_core]
[ 836.191414] mlx5_do_bond_work+0x441/0x620 [mlx5_core]
[ 836.192278] process_one_work+0x25c/0x590
[ 836.192963] worker_thread+0x4f/0x3d0
[ 836.193609] kthread+0xcb/0xf0
[ 836.194189] ret_from_fork+0x1f/0x30
[ 836.194826] -> #0 (&ldev->lock){+.+.}-{3:3}:
[ 836.195734] __lock_acquire+0x15b8/0x2a10
[ 836.196426] lock_acquire+0xce/0x2d0
[ 836.197057] __mutex_lock+0x6b/0xf80
[ 836.197708] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.198575] tc_act_parse_mirred+0x25b/0x800 [mlx5_core]
[ 836.199467] parse_tc_actions+0x168/0x5a0 [mlx5_core]
[ 836.200340] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core]
[ 836.201241] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core]
[ 836.202187] tc_setup_cb_add+0xd7/0x200
[ 836.202856] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 836.203739] fl_change+0xbbe/0x1730 [cls_flower]
[ 836.204501] tc_new_tfilter+0x407/0xd90
[ 836.205168] rtnetlink_rcv_msg+0x406/0x5a0
[ 836.205877] netlink_rcv_skb+0x4e/0xf0
[ 836.206535] netlink_unicast+0x190/0x250
[ 836.207217] netlink_sendmsg+0x243/0x4b0
[ 836.207915] sock_sendmsg+0x33/0x40
[ 836.208538] ____sys_sendmsg+0x1d1/0x1f0
[ 836.209219] ___sys_sendmsg+0xab/0xf0
[ 836.209878] __sys_sendmsg+0x51/0x90
[ 836.210510] do_syscall_64+0x3d/0x90
[ 836.211137] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 836.211954] other info that might help us debug this:
[ 836.213174] Chain exists of:
[ 836.213174] &ldev->lock --> rtnl_mutex --> &block->cb_lock
836.214650] Possible unsafe locking scenario:
[ 836.214650]
[ 836.215574] CPU0 CPU1
[ 836.216255] ---- ----
[ 836.216943] lock(&block->cb_lock);
[ 836.217518] lock(rtnl_mutex);
[ 836.218348] lock(&block->cb_lock);
[ 836.219212] lock(&ldev->lock);
[ 836.219758]
[ 836.219758] *** DEADLOCK ***
[ 836.219758]
[ 836.220747] 2 locks held by handler1/12198:
[ 836.221390] #0: ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[ 836.222646] #1: ffff88810c9a92c0 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core]
[ 836.224063] stack backtrace:
[ 836.224799] CPU: 6 PID: 12198 Comm: handler1 Not tainted 5.19.0-rc5_net_56b7df2 #1
[ 836.225923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 836.227476] Call Trace:
[ 836.227929] <TASK>
[ 836.228332] dump_stack_lvl+0x57/0x7d
[ 836.228924] check_noncircular+0x104/0x120
[ 836.229562] __lock_acquire+0x15b8/0x2a10
[ 836.230201] lock_acquire+0xce/0x2d0
[ 836.230776] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.231614] ? find_held_lock+0x2b/0x80
[ 836.232221] __mutex_lock+0x6b/0xf80
[ 836.232799] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.233636] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.234451] ? xa_load+0xc3/0x190
[ 836.234995] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core]
[ 836.235803] tc_act_parse_mirred+0x25b/0x800 [mlx5_core]
[ 836.236636] ? tc_act_can_offload_mirred+0x135/0x210 [mlx5_core]
[ 836.237550] parse_tc_actions+0x168/0x5a0 [mlx5_core]
[ 836.238364] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core]
[ 836.239202] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core]
[ 836.240076] ? lock_acquire+0xce/0x2d0
[ 836.240668] ? tc_setup_cb_add+0x5b/0x200
[ 836.241294] tc_setup_cb_add+0xd7/0x200
[ 836.241917] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 836.242709] fl_change+0xbbe/0x1730 [cls_flower]
[ 836.243408] tc_new_tfilter+0x407/0xd90
[ 836.244043] ? tc_del_tfilter+0x880/0x880
[ 836.244672] rtnetlink_rcv_msg+0x406/0x5a0
[ 836.245310] ? netlink_deliver_tap+0x7a/0x4b0
[ 836.245991] ? if_nlmsg_stats_size+0x2b0/0x2b0
[ 836.246675] netlink_rcv_skb+0x4e/0xf0
[ 836.258046] netlink_unicast+0x190/0x250
[ 836.258669] netlink_sendmsg+0x243/0x4b0
[ 836.259288] sock_sendmsg+0x33/0x40
[ 836.259857] ____sys_sendmsg+0x1d1/0x1f0
[ 836.260473] ___sys_sendmsg+0xab/0xf0
[ 836.261064] ? lock_acquire+0xce/0x2d0
[ 836.261669] ? find_held_lock+0x2b/0x80
[ 836.262272] ? __fget_files+0xb9/0x190
[ 836.262871] ? __fget_files+0xd3/0x190
[ 836.263462] __sys_sendmsg+0x51/0x90
[ 836.264064] do_syscall_64+0x3d/0x90
[ 836.264652] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 836.265425] RIP: 0033:0x7fdbe5e2677d
[ 836.266012] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ba ee
ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f
05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 ee ee ff ff 48
[ 836.268485] RSP: 002b:00007fdbe48a75a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[ 836.269598] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fdbe5e2677d
[ 836.270576] RDX: 0000000000000000 RSI: 00007fdbe48a7640 RDI: 000000000000003c
[ 836.271565] RBP: 00007fdbe48a8368 R08: 0000000000000000 R09: 0000000000000000
[ 836.272546] R10: 00007fdbe48a84b0 R11: 0000000000000293 R12: 0000557bd17dc860
[ 836.273527] R13: 0000000000000000 R14: 0000557bd17dc860 R15: 00007fdbe48a7640
[ 836.274521] </TASK>
To avoid using mode holding ldev->lock in the configure flow, we queue a
work to the lag workqueue and cease wait on a completion object.
In addition, we remove the lock from mlx5_lag_do_mirred() since it is
not really protecting anything.
It should be noted that an actual deadlock has not been observed.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case command interface is down, or the command is not allowed, driver
did not increment the entry refcount, but might have decrement as part
of forced completion handling.
Fix that by always increment and decrement the refcount to make it
symmetric for all flows.
Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reported-by: Jack Wang <jinpu.wang@ionos.com>
Tested-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|