From 9599815de61db104ad21bc61f5e3544d2415c6ee Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 20 Oct 2014 12:45:32 +0200 Subject: usb: dwc2: gadget: fix enumeration issues Excessive debug messages might cause timing issues that prevent correct usb enumeration. This patch hides information about USB bus reset to let driver enumerate fast enough to avoid making host angry. This fixes endless enumeration and usb reset loop observed with some Linux hosts. Acked-by: Paul Zimmerman Signed-off-by: Marek Szyprowski Reviewed-by: Felipe Balbi Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index eee87098bb8b94..8b5c079c7b7dde 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -2327,7 +2327,7 @@ irq_retry: u32 usb_status = readl(hsotg->regs + GOTGCTL); - dev_info(hsotg->dev, "%s: USBRst\n", __func__); + dev_dbg(hsotg->dev, "%s: USBRst\n", __func__); dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", readl(hsotg->regs + GNPTXSTS)); -- cgit 1.2.3-korg From 191252837626fca0de694c18bb2aa64c118eda89 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 29 Oct 2014 09:07:30 +0100 Subject: USB: kobil_sct: fix non-atomic allocation in write path Write may be called from interrupt context so make sure to use GFP_ATOMIC for all allocations in write. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/kobil_sct.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 3d2bd65df0fc71..02c420af251e27 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -335,7 +335,8 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, port->interrupt_out_urb->transfer_buffer_length = length; priv->cur_pos = priv->cur_pos + length; - result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO); + result = usb_submit_urb(port->interrupt_out_urb, + GFP_ATOMIC); dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result); todo = priv->filled - priv->cur_pos; @@ -350,7 +351,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { result = usb_submit_urb(port->interrupt_in_urb, - GFP_NOIO); + GFP_ATOMIC); dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result); } } -- cgit 1.2.3-korg From e681286de221af78fc85db9222b6a203148c005a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 29 Oct 2014 09:07:31 +0100 Subject: USB: opticon: fix non-atomic allocation in write path Write may be called from interrupt context so make sure to use GFP_ATOMIC for all allocations in write. Fixes: 0d930e51cfe6 ("USB: opticon: Add Opticon OPN2001 write support") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/opticon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 4856fb7e637e70..4b7bfb394a32ab 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -215,7 +215,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, /* The connected devices do not have a bulk write endpoint, * to transmit data to de barcode device the control endpoint is used */ - dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO); + dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); if (!dr) { count = -ENOMEM; goto error_no_dr; -- cgit 1.2.3-korg From cf84a691a61606a2e7269907d3727e2d9fa148ee Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 Oct 2014 18:34:33 +0100 Subject: USB: cdc-acm: add device id for GW Instek AFG-2225 Add device-id entry for GW Instek AFG-2225, which has a byte swapped bInterfaceSubClass (0x20). Reported-by: Karl Palsson Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e934e19f49f57e..959343b891c751 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1681,6 +1681,7 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */ { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, /* Motorola H24 HSPA module: */ -- cgit 1.2.3-korg From 24cb4502c97b0c9bed90aae0225adb92088783d3 Mon Sep 17 00:00:00 2001 From: Jim Paris Date: Thu, 30 Oct 2014 11:04:47 -0400 Subject: cdc-acm: ensure that termios get set when the port is activated The driver wasn't properly configuring the hardware for the current termios settings under all conditions. Ensure that termios are written to the device when the port is activated. Signed-off-by: Jim Paris Reviewed-by: Johan Hovold Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 959343b891c751..6771f884cb821e 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -60,6 +60,9 @@ static struct acm *acm_table[ACM_TTY_MINORS]; static DEFINE_MUTEX(acm_table_lock); +static void acm_tty_set_termios(struct tty_struct *tty, + struct ktermios *termios_old); + /* * acm_table accessors */ @@ -554,6 +557,8 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) goto error_submit_urb; } + acm_tty_set_termios(tty, NULL); + /* * Unthrottle device in case the TTY was closed while throttled. */ -- cgit 1.2.3-korg From 90a646c770c50cc206ceba0d7b50453c46c13c36 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 1 Oct 2014 11:29:14 +0200 Subject: usb: Do not allow usb_alloc_streams on unconfigured devices This commit fixes the following oops: [10238.622067] scsi host3: uas_eh_bus_reset_handler start [10240.766164] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd [10245.779365] usb 3-4: device descriptor read/8, error -110 [10245.883331] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd [10250.897603] usb 3-4: device descriptor read/8, error -110 [10251.058200] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [10251.058244] IP: [] xhci_check_streams_endpoint+0x91/0x140 [10251.059473] Call Trace: [10251.059487] [] xhci_calculate_streams_and_bitmask+0xbc/0x130 [10251.059520] [] xhci_alloc_streams+0x10f/0x5a0 [10251.059548] [] ? check_preempt_curr+0x75/0xa0 [10251.059575] [] ? ttwu_do_wakeup+0x2c/0x100 [10251.059601] [] ? ttwu_do_activate.constprop.111+0x66/0x70 [10251.059635] [] usb_alloc_streams+0xab/0xf0 [10251.059662] [] uas_configure_endpoints+0x128/0x150 [uas] [10251.059694] [] uas_post_reset+0x3c/0xb0 [uas] [10251.059722] [] usb_reset_device+0x1b9/0x2a0 [10251.059749] [] uas_eh_bus_reset_handler+0xb2/0x190 [uas] [10251.059781] [] scsi_try_bus_reset+0x53/0x110 [10251.059808] [] scsi_eh_bus_reset+0xf7/0x270 The problem is the following call sequence (simplified): 1) usb_reset_device 2) usb_reset_and_verify_device 2) hub_port_init 3) hub_port_finish_reset 3) xhci_discover_or_reset_device This frees xhci->devs[slot_id]->eps[ep_index].ring for all eps but 0 4) usb_get_device_descriptor This fails 5) hub_port_init fails 6) usb_reset_and_verify_device fails, does not restore device config 7) uas_post_reset 8) xhci_alloc_streams NULL deref on the free-ed ring This commit fixes this by not allowing usb_alloc_streams to continue if the device is not configured. Note that we do allow usb_free_streams to continue after a (logical) disconnect, as it is necessary to explicitly free the streams at the xhci controller level. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index b84fb141e122f7..a6efb4184f2b4c 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2060,6 +2060,8 @@ int usb_alloc_streams(struct usb_interface *interface, return -EINVAL; if (dev->speed != USB_SPEED_SUPER) return -EINVAL; + if (dev->state < USB_STATE_CONFIGURED) + return -ENODEV; for (i = 0; i < num_eps; i++) { /* Streams only apply to bulk endpoints. */ -- cgit 1.2.3-korg From 93c9bf4d1838d5851a18ca398b0ad66397f05056 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 31 Oct 2014 14:49:47 -0400 Subject: usb-storage: handle a skipped data phase Sometimes mass-storage devices using the Bulk-only transport will mistakenly skip the data phase of a command. Rather than sending the data expected by the host or sending a zero-length packet, they go directly to the status phase and send the CSW. This causes problems for usb-storage, for obvious reasons. The driver will interpret the CSW as a short data transfer and will wait to receive a CSW. The device won't have anything left to send, so the command eventually times out. The SCSI layer doesn't retry commands after they time out (this is a relatively recent change). Therefore we should do our best to detect a skipped data phase and handle it promptly. This patch adds code to do that. If usb-storage receives a short 13-byte data transfer from the device, and if the first four bytes of the data match the CSW signature, the driver will set the residue to the full transfer length and interpret the data as a CSW. This fixes Bugzilla #86611. Signed-off-by: Alan Stern CC: Matthew Dharm Tested-by: Paul Osmialowski CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/transport.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 22c7d4360fa222..b1d815eb6d0bb3 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -1118,6 +1118,31 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) */ if (result == USB_STOR_XFER_LONG) fake_sense = 1; + + /* + * Sometimes a device will mistakenly skip the data phase + * and go directly to the status phase without sending a + * zero-length packet. If we get a 13-byte response here, + * check whether it really is a CSW. + */ + if (result == USB_STOR_XFER_SHORT && + srb->sc_data_direction == DMA_FROM_DEVICE && + transfer_length - scsi_get_resid(srb) == + US_BULK_CS_WRAP_LEN) { + struct scatterlist *sg = NULL; + unsigned int offset = 0; + + if (usb_stor_access_xfer_buf((unsigned char *) bcs, + US_BULK_CS_WRAP_LEN, srb, &sg, + &offset, FROM_XFER_BUF) == + US_BULK_CS_WRAP_LEN && + bcs->Signature == + cpu_to_le32(US_BULK_CS_SIGN)) { + usb_stor_dbg(us, "Device skipped data phase\n"); + scsi_set_resid(srb, transfer_length); + goto skipped_data_phase; + } + } } /* See flow chart on pg 15 of the Bulk Only Transport spec for @@ -1153,6 +1178,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; + skipped_data_phase: /* check bulk status */ residue = le32_to_cpu(bcs->Residue); usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", -- cgit 1.2.3-korg From aee0ce3ae73c566ace9958302e001d3cbbb0a623 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 31 Oct 2014 14:37:32 +0100 Subject: uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model These drives hang when receiving ATA12 commands, so set the US_FL_NO_ATA_1X quirk to filter these out. Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 8511b54a65d966..d57e138567a07e 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -61,6 +61,13 @@ UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* https://bbs.archlinux.org/viewtopic.php?id=183190 */ +UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999, + "Seagate", + "Backup+ BK", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* Reported-by: Claudio Bizzarri */ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999, "JMicron", -- cgit 1.2.3-korg From cee2448e5b412ea109e92be12cd504df28ab1e0f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 29 Oct 2014 11:46:11 +0300 Subject: USB: HWA: fix a warning message We wanted to print the version as (major).(minor) but because the shift operation is higher precedence than the mask then we print (minor).(minor). Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/hwa-hc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index d0d8fadf706610..1db0626c8bf415 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -607,7 +607,7 @@ found: wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100) dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", - le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00 >> 8, + (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8, le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff); result = 0; error: -- cgit 1.2.3-korg From 2391eacbd00b706ff4902db7dbee21e33b6f1850 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 28 Oct 2014 11:05:29 +0100 Subject: xhci: Disable streams on Asmedia 1042 xhci controllers Streams seem to be broken on the Asmedia 1042. An uas capable Seagate disk which is known to work fine with other controllers causes the system to freeze when connected over usb-3 with this controller, where as it works fine with uas in usb-2 ports, indicating a problem with streams. This is a bit bigger hammer then I would like to use for this, but for now it will have to make do. I've ordered a pci-e usb controller card with an Asmedia 1042, once that arrives I'll try to get streams to work (with a quirk flag if necessary) and then we can re-enable them. For now this at least makes uas capable disk enclosures work again by forcing fallback to the usb-storage driver. Reported-by: Bogdan Mihalcea Cc: Bogdan Mihalcea Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 280dde93abe528..2c7f3fb811d13d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -162,6 +162,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS; + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == 0x1042) + xhci->quirks |= XHCI_BROKEN_STREAMS; + if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Resetting on resume"); -- cgit 1.2.3-korg From 673029fe9c16c95600bdaca4760673527af32edf Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 9 Oct 2014 17:27:56 +0200 Subject: uas: Add NO_ATA_1X for VIA VL711 devices Just like some Seagate enclosures, these devices do not seem to grok ata pass through commands. Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index d57e138567a07e..ea793c1f30414c 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -82,3 +82,10 @@ UNUSUAL_DEV(0x174c, 0x5106, 0x0000, 0x9999, "ASM1051", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_UAS), + +/* Reported-by: Hans de Goede */ +UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, + "VIA", + "VL711", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), -- cgit 1.2.3-korg From cd6e245a2d061a8367e37aaece32cf3fc922de80 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 7 Oct 2014 11:12:07 +0200 Subject: usb: Remove references to non-existent PLAT_S5P symbol The PLAT_S5P Kconfig symbol was removed in commit d78c16ccde96 ("ARM: SAMSUNG: Remove remaining legacy code"). There are still some references left, fix that by replacing them with ARCH_S5PV210. Fixes: d78c16ccde96 ("ARM: SAMSUNG: Remove remaining legacy code") Reported-by: Paul Bolle Acked-by: Jingoo Han Signed-off-by: Sylwester Nawrocki Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a8a30b1d416761..a3ca1375dd522b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -234,7 +234,7 @@ config USB_EHCI_SH config USB_EHCI_EXYNOS tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" - depends on PLAT_S5P || ARCH_EXYNOS + depends on ARCH_S5PV210 || ARCH_EXYNOS help Enable support for the Samsung Exynos SOC's on-chip EHCI controller. @@ -550,7 +550,7 @@ config USB_OHCI_SH config USB_OHCI_EXYNOS tristate "OHCI support for Samsung S5P/EXYNOS SoC Series" - depends on PLAT_S5P || ARCH_EXYNOS + depends on ARCH_S5PV210 || ARCH_EXYNOS help Enable support for the Samsung Exynos SOC's on-chip OHCI controller. -- cgit 1.2.3-korg From ec5633ba677761b44ba94ae29c906ba79dd6eaa0 Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Thu, 2 Oct 2014 00:10:57 +0100 Subject: usb: storage: fix build warnings !CONFIG_PM Functions fw5895_init() and config_autodelink_before_power_down() are used only when CONFIG_PM is defined. drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] Signed-off-by: Luis Henriques Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/realtek_cr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 8591d89a38e666..27e4a580d2ed2f 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -626,6 +626,7 @@ static int config_autodelink_after_power_on(struct us_data *us) return 0; } +#ifdef CONFIG_PM static int config_autodelink_before_power_down(struct us_data *us) { struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); @@ -716,6 +717,7 @@ static void fw5895_init(struct us_data *us) } } } +#endif #ifdef CONFIG_REALTEK_AUTOPM static void fw5895_set_mmc_wp(struct us_data *us) -- cgit 1.2.3-korg From 2e069232fd470175068cbd6eaf8879ef47d772f8 Mon Sep 17 00:00:00 2001 From: Mark Einon Date: Sun, 19 Oct 2014 20:25:26 +0100 Subject: MAINTAINERS: Remove duplicate entry for usbip driver The usbip driver was moved out of staging in 3.17-rc3 but the MAINTAINERS file still has the old staging entry as well as the new one. Remove the old entry. Signed-off-by: Mark Einon Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 5 ----- 1 file changed, 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3c6427190be2a4..22d0bb08127f8e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9703,11 +9703,6 @@ S: Maintained F: Documentation/hid/hiddev.txt F: drivers/hid/usbhid/ -USB/IP DRIVERS -L: linux-usb@vger.kernel.org -S: Orphan -F: drivers/staging/usbip/ - USB ISP116X DRIVER M: Olav Kongas L: linux-usb@vger.kernel.org -- cgit 1.2.3-korg From 876af5d454548be40327ba9efea4bc92a8575019 Mon Sep 17 00:00:00 2001 From: Adel Gadllah Date: Thu, 9 Oct 2014 09:29:29 +0200 Subject: USB: quirks: enable device-qualifier quirk for another Elan touchscreen Currently this quirk is enabled for the model with the device id 0x0089, it is needed for the 0x009b model, which is found on the Fujitsu Lifebook u904 as well. Signed-off-by: Adel Gadllah Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 5ae883dc21f50f..d1080ed3608ce8 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -97,6 +97,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04f3, 0x0089), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, + { USB_DEVICE(0x04f3, 0x009b), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit 1.2.3-korg From d749947561af5996ccc076b2ffcc5f48b1be5d74 Mon Sep 17 00:00:00 2001 From: Adel Gadllah Date: Thu, 9 Oct 2014 09:29:30 +0200 Subject: USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen Yet another device affected by this. Tested-by: Kevin Fenzi Signed-off-by: Adel Gadllah Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d1080ed3608ce8..39b4081b632df2 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -100,6 +100,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04f3, 0x009b), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, + { USB_DEVICE(0x04f3, 0x016f), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit 1.2.3-korg From b45abacde3d551c6696c6738bef4a1805d0bf27a Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 27 Oct 2014 14:53:29 +0100 Subject: xhci: no switching back on non-ULT Haswell The switch back is limited to ULT even on HP. The contrary finding arose by bad luck in BIOS versions for testing. This fixes spontaneous resume from S3 on some HP laptops. Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 2c7f3fb811d13d..9a69b1f1b30088 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -127,20 +127,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_REBOOT; xhci->quirks |= XHCI_AVOID_BEI; } - if (pdev->vendor == PCI_VENDOR_ID_INTEL && - (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) { - /* Workaround for occasional spurious wakeups from S5 (or - * any other sleep) on Haswell machines with LPT and LPT-LP - * with the new Intel BIOS - */ - /* Limit the quirk to only known vendors, as this triggers - * yet another BIOS bug on some other machines - * https://bugzilla.kernel.org/show_bug.cgi?id=66171 - */ - if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) - xhci->quirks |= XHCI_SPURIOUS_WAKEUP; - } if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) { xhci->quirks |= XHCI_SPURIOUS_REBOOT; -- cgit 1.2.3-korg From d1d9548256fbdf2e049d6413a5266c41e73658ee Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 23 Oct 2014 14:40:57 +0200 Subject: uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models These drives hang when receiving ATA12 commands, so set the US_FL_NO_ATA_1X quirk to filter these out. Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index ea793c1f30414c..2fefaf923e4a2e 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -54,6 +54,20 @@ UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: Hans de Goede */ +UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999, + "Seagate", + "Expansion Desk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: Bogdan Mihalcea */ +UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999, + "Seagate", + "Backup Plus", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* https://bbs.archlinux.org/viewtopic.php?id=183190 */ UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999, "Seagate", -- cgit 1.2.3-korg From 01ed67dc70834d00d62b6e754ee0f76301fbc140 Mon Sep 17 00:00:00 2001 From: Tony Zheng Date: Fri, 17 Oct 2014 19:43:02 +0800 Subject: usb: core: need to call usb_phy_notify_connect after device setup Since we notify disconnecting based on the usb device is existed (port_dev->child, the child device at roothub is not NULL), we need to notify connect after device has been registered. This fixes a bug that do fast plug in/out test, and the notify_disconnect is not called due to roothub child is NULL and the enumeration has failed. Cc: v3.17+ Signed-off-by: Tony Zheng Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 11e80ac3132442..65a8e5055885a2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4468,9 +4468,6 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval) goto fail; - if (hcd->usb_phy && !hdev->parent) - usb_phy_notify_connect(hcd->usb_phy, udev->speed); - /* * Some superspeed devices have finished the link training process * and attached to a superspeed hub port, but the device descriptor @@ -4783,6 +4780,10 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, port_dev->child = NULL; spin_unlock_irq(&device_state_lock); mutex_unlock(&usb_port_peer_mutex); + } else { + if (hcd->usb_phy && !hdev->parent) + usb_phy_notify_connect(hcd->usb_phy, + udev->speed); } } -- cgit 1.2.3-korg From b2108f1e519e983e5dd5712b3a44f7366ab509e4 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 4 Nov 2014 11:14:31 +0800 Subject: usb: core: notify disconnection when core detects disconnect It is safe to call notify disconnect when the usb core thinks the device is disconnected. This commit also fixes one bug found at below situation: we have not enabled usb wakeup, we do system suspend when there is an usb device at the port, after suspend, we plug out the usb device, then plug in device again. At that time, the nofity disconnect was not called at current code, as the controller doesn't know the usb device was disconnected during the suspend, but USB core knows the port has changed during that periods. So to fix this problem, and let the usb core call notify disconnect. Cc: 3.17+ Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 65a8e5055885a2..b649fef2e35d4a 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4624,8 +4624,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, /* Disconnect any existing devices under this port */ if (udev) { - if (hcd->usb_phy && !hdev->parent && - !(portstatus & USB_PORT_STAT_CONNECTION)) + if (hcd->usb_phy && !hdev->parent) usb_phy_notify_disconnect(hcd->usb_phy, udev->speed); usb_disconnect(&port_dev->child); } -- cgit 1.2.3-korg From ac0225f94f2af14d5db5a3ca2e9b151bb5488a52 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 5 Nov 2014 11:12:17 -0800 Subject: Revert "storage: Replace magic number with define in usb_stor_euscsi_init()" This reverts commit bda9893c50fb56253d3c206c14e3f933e5f68b3c as it was incorrect. Reported-by: Mark Knibbs Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/initializers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c index 4bc2fc98636ed2..5a8b5ff1e45bf5 100644 --- a/drivers/usb/storage/initializers.c +++ b/drivers/usb/storage/initializers.c @@ -52,7 +52,7 @@ int usb_stor_euscsi_init(struct us_data *us) us->iobuf[0] = 0x1; result = usb_stor_control_msg(us, us->send_ctrl_pipe, 0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR, - 0x01, 0x0, us->iobuf, 0x1, USB_CTRL_SET_TIMEOUT); + 0x01, 0x0, us->iobuf, 0x1, 5000); usb_stor_dbg(us, "-- result is %d\n", result); return 0; -- cgit 1.2.3-korg From 4473d054ceb572557954f9536731d39b20937b0c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 5 Nov 2014 18:41:59 +0100 Subject: USB: cdc-acm: only raise DTR on transitions from B0 Make sure to only raise DTR on transitions from B0 in set_termios. Also allow set_termios to be called from open with a termios_old of NULL. Note that DTR will not be raised prematurely in this case. Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 6771f884cb821e..9d6495424b0605 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -985,11 +985,12 @@ static void acm_tty_set_termios(struct tty_struct *tty, /* FIXME: Needs to clear unsupported bits in the termios */ acm->clocal = ((termios->c_cflag & CLOCAL) != 0); - if (!newline.dwDTERate) { + if (C_BAUD(tty) == B0) { newline.dwDTERate = acm->line.dwDTERate; newctrl &= ~ACM_CTRL_DTR; - } else + } else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) { newctrl |= ACM_CTRL_DTR; + } if (newctrl != acm->ctrlout) acm_set_control(acm, acm->ctrlout = newctrl); -- cgit 1.2.3-korg From a88098bdb272fb631a59fb152bfef7c827531294 Mon Sep 17 00:00:00 2001 From: Mark Knibbs Date: Tue, 4 Nov 2014 13:00:24 +0000 Subject: USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init() The timeout argument to usb_stor_control_msg() is specified in jiffies, not milliseconds. Signed-off-by: Mark Knibbs Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/initializers.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c index 5a8b5ff1e45bf5..73f125e0cb5870 100644 --- a/drivers/usb/storage/initializers.c +++ b/drivers/usb/storage/initializers.c @@ -52,7 +52,7 @@ int usb_stor_euscsi_init(struct us_data *us) us->iobuf[0] = 0x1; result = usb_stor_control_msg(us, us->send_ctrl_pipe, 0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR, - 0x01, 0x0, us->iobuf, 0x1, 5000); + 0x01, 0x0, us->iobuf, 0x1, 5 * HZ); usb_stor_dbg(us, "-- result is %d\n", result); return 0; @@ -100,7 +100,7 @@ int usb_stor_huawei_e220_init(struct us_data *us) result = usb_stor_control_msg(us, us->send_ctrl_pipe, USB_REQ_SET_FEATURE, USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 0x01, 0x0, NULL, 0x0, 1000); + 0x01, 0x0, NULL, 0x0, 1 * HZ); usb_stor_dbg(us, "Huawei mode set result is %d\n", result); return 0; } -- cgit 1.2.3-korg From f20531a9aae0c7378d9fa75b4b5d99b7eecab066 Mon Sep 17 00:00:00 2001 From: Oussama Ghorbel Date: Tue, 4 Nov 2014 11:47:06 +0530 Subject: phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly The USB OTG port does not work since v3.16 on omap platform. This is a regression introduced by the commit eb82a3d846fa (phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove). This because the call to pm_runtime_enable() function is moved after the call to devm_phy_create() function, which has side effect since later in the subsequent calls of devm_phy_create() there is a check with pm_runtime_enabled() to configure few things. Fixes: eb82a3d846fa Signed-off-by: Oussama Ghorbel Tested-by: Rabin Vincent Signed-off-by: Kishon Vijay Abraham I Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-omap-usb2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 8c842980834a2c..f091576b644903 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -258,14 +258,16 @@ static int omap_usb2_probe(struct platform_device *pdev) otg->phy = &phy->phy; platform_set_drvdata(pdev, phy); + pm_runtime_enable(phy->dev); generic_phy = devm_phy_create(phy->dev, NULL, &ops, NULL); - if (IS_ERR(generic_phy)) + if (IS_ERR(generic_phy)) { + pm_runtime_disable(phy->dev); return PTR_ERR(generic_phy); + } phy_set_drvdata(generic_phy, phy); - pm_runtime_enable(phy->dev); phy_provider = devm_of_phy_provider_register(phy->dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) { -- cgit 1.2.3-korg From 2a8cdfde9237c4e1bd7c2e68c415b006491d23cc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 6 Nov 2014 18:08:33 +0100 Subject: USB: cdc-acm: add quirk for control-line state requests Add new quirk for devices that cannot handle control-line state requests. Note that we currently send these requests to all devices, regardless of whether they claim to support it, but that errors are only logged if support is claimed. Since commit 0943d8ead30e ("USB: cdc-acm: use tty-port dtr_rts"), which only changed the timings for these requests slightly, this has been reported to cause occasional firmware crashes on Simtec Electronics Entropy Key devices after re-enumeration. Enable the quirk for this device. Reported-by: Nix Tested-by: Nix Cc: stable # v3.16 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 14 ++++++++++++-- drivers/usb/class/cdc-acm.h | 2 ++ 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 9d6495424b0605..077d58ac3dcba6 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -148,8 +148,15 @@ static int acm_ctrl_msg(struct acm *acm, int request, int value, /* devices aren't required to support these requests. * the cdc acm descriptor tells whether they do... */ -#define acm_set_control(acm, control) \ - acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, control, NULL, 0) +static inline int acm_set_control(struct acm *acm, int control) +{ + if (acm->quirks & QUIRK_CONTROL_LINE_STATE) + return -EOPNOTSUPP; + + return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, + control, NULL, 0); +} + #define acm_set_line(acm, line) \ acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line)) #define acm_send_break(acm, ms) \ @@ -1320,6 +1327,7 @@ made_compressed_probe: tty_port_init(&acm->port); acm->port.ops = &acm_port_ops; init_usb_anchor(&acm->delayed); + acm->quirks = quirks; buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { @@ -1687,6 +1695,8 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */ + .driver_info = QUIRK_CONTROL_LINE_STATE, }, { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */ { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index fc75651afe1c9c..d3251ebd09e2e0 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -121,6 +121,7 @@ struct acm { unsigned int throttle_req:1; /* throttle requested */ u8 bInterval; struct usb_anchor delayed; /* writes queued for a device about to be woken */ + unsigned long quirks; }; #define CDC_DATA_INTERFACE_TYPE 0x0a @@ -132,3 +133,4 @@ struct acm { #define NOT_A_MODEM BIT(3) #define NO_DATA_INTERFACE BIT(4) #define IGNORE_DEVICE BIT(5) +#define QUIRK_CONTROL_LINE_STATE BIT(6) -- cgit 1.2.3-korg From 1910195423e7bea4c01c42bfe3f81792a6e969bb Mon Sep 17 00:00:00 2001 From: Mark Knibbs Date: Tue, 4 Nov 2014 13:00:15 +0000 Subject: USB: Update default usb-storage delay_use value in kernel-parameters.txt Back in 2010 the default usb-storage delay_use time was reduced from 5 to 1 second (commit a4a47bc03fe520e95e0c4212bf97c86545fb14f9), but kernel-parameters.txt wasn't updated to reflect that. Signed-off-by: Mark Knibbs Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4c81a860cc2bcd..479f33204a3727 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3621,7 +3621,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. usb-storage.delay_use= [UMS] The delay in seconds before a new device is - scanned for Logical Units (default 5). + scanned for Logical Units (default 1). usb-storage.quirks= [UMS] A list of quirks entries to supplement or -- cgit 1.2.3-korg