; ----------------------------------------------------------------------- ; ; Copyright 1994-2009 H. Peter Anvin - All Rights Reserved ; Copyright 2009-2010 Intel Corporation; author: H. Peter Anvin ; ; This program is free software; you can redistribute it and/or modify ; it under the terms of the GNU General Public License as published by ; the Free Software Foundation, Inc., 53 Temple Place Ste 330, ; Bostom MA 02111-1307, USA; either version 2 of the License, or ; (at your option) any later version; incorporated herein by reference. ; ; ----------------------------------------------------------------------- ; ; layout.inc ; ; Memory layout of segments ; ; Default to 16-bit code bits 16 ; Memory below 0800h is reserved for the BIOS and the MBR. BSS_START equ 0800h ; Text starts at the load address of 07C00h. TEXT_START equ 7C00h ; ; 16-bit stack layout ; ; PXELINUX: There are apparently some AMI BIOSes in the field which ; put their BEV stack somewhere below 7C00h (and therefore don't ; handle localboot properly), so avoid that immediate memory region. ; The range that is known to be bad is approximately 75E8..7C00; the ; lower bound is tight. ; global STACK_LEN, STACK_TOP, STACK_BASE STACK_LEN equ 4096 %if IS_PXELINUX STACK_TOP equ 7000h %else STACK_TOP equ 7c00h %endif STACK_BASE equ STACK_TOP - STACK_LEN ; The secondary BSS section, above the text; we really wish we could ; just make it follow .bcopy32 or hang off the end, ; but it doesn't seem to work that way. LATEBSS_START equ 0B800h ; ; 32-bit stack layout ; STACK32_LEN equ 64*1024 section .stack nobits write align=4096 resb STACK32_LEN ; ; The various sections and their relationship ; ; Use .earlybss for things that MUST be in low memory. section .earlybss nobits write section .config write progbits align=4 section .replacestub exec write progbits align=16 section .gentextnr exec write nobits align=16 section .stack16 write nobits align=16 ; Use .bss16 for things that doesn't have to be in low memory; ; .earlybss should be used for things that absolutely have ; to be below 0x7c00. section .bss16 write nobits align=16 %if 0 ; IS_PXELINUX ; Warning here: RBFG build 22 randomly overwrites ; memory location [0x5680,0x576c), possibly more. It ; seems that it gets confused and screws up the ; pointer to its own internal packet buffer and starts ; writing a received ARP packet into low memory. section .rbfg write nobits RBFG_brainfuck: resb 2048 ; Bigger than an Ethernet packet... %endif section .init exec write progbits align=1 section .text16 exec write progbits align=1 section .textnr exec nowrite progbits align=1 section .bcopyxx.text exec nowrite progbits align=16 section .bcopyxx.data noexec write progbits align=16 section .data16 noexec write progbits align=16 section .adv write nobits align=512 ; .uibss contains bss data which is guaranteed to be ; safe to clobber during the loading of the image. This ; is because while loading the primary image we will clobber ; the spillover from the last fractional sector load. section .uibss write nobits align=16 section .savedata write nobits align=16 ; Symbols from linker script %macro SECINFO 1 extern __%1_start, __%1_end extern __%1_len, __%1_dwords %endmacro SECINFO bss16 SECINFO uibss SECINFO config SECINFO replacestub SECINFO bcopyxx SECINFO pm_code SECINFO high_clear extern __pm_code_lma SECINFO bss extern free_high_memory global _start section .text16 ; ; Segment assignments in the bottom 640K ; Keep the low-memory footprint as small as possible... overrun is a hard ; failure! ; serial_buf_size equ 4096 ; Should be a power of 2 ; ; Transfer buffer segment: guaranteed to be aligned 64K, used for disk I/O ; One symbol for the segment number, one for the absolute address ; extern xfer_buf_seg section .xfer_buf write nobits align=65536 global core_xfer_buf:data hidden core_xfer_buf resb 65536 ; ; At the very end, the lowmem heap ; extern __lowmem_heap min_lowmem_heap equ 65536 section .text16