ChangeSet@1.1143, 2003-09-03 18:45:43-03:00, marcelo@logos.cnet Changed EXTRAVERSION to -pre3 TAG: v2.4.23-pre3 ChangeSet@1.1142, 2003-09-03 17:23:43-03:00, marcel@holtmann.org [PATCH] PCI quirk for SMBus bridge on Asus P4 boards Hi Marcelo, this has been in 2.5 for some time now and I think it can be added to 2.4 too. ChangeSet@1.1131, 2003-09-03 08:42:53+02:00, marcel@holtmann.org [PATCH] PCI quirk for SMBus bridge on Asus P4 boards Asus hides the SMBus PCI bridge within the ICH2 or ICH4 southbridge on Asus P4 mainboards. The attached patch adds a quirk to re-enable the SMBus PCI bridge for P4B533, P4T533, P4PE and P4G8X Deluxe mainboards. Original patch for 2.5 from Dominik Brodowski drivers/pci/quirks.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 4 ++ 2 files changed, 70 insertions(+) TAG: v2.4.23-pre3 ChangeSet@1.1119.1.15, 2003-09-03 15:26:05-03:00, m.c.p@wolk-project.de [PATCH] Add missing IRQ_NONE clash fix hunk > This change added an (empty) IRQ_NONE #define to interrupt.h. > Several scsi drivers are already using an IRQ_NONE. Rename that to > SCSI_IRQ_NONE (a similar change was done in 2.5 by Andrew Morton several > months ago). right, but you forgot one header :-) ... Attached is a patch. ChangeSet@1.1119.1.14, 2003-09-03 14:57:40-03:00, marcelo@logos.cnet Adrian & Chantal: Unused variable in ip2main.c ChangeSet@1.1140, 2003-09-03 13:47:45-04:00, javier@tudela.mad.ttd.net [wireless airo] MIC support using CryptoAPI ChangeSet@1.1139, 2003-09-03 13:47:06-04:00, javier@tudela.mad.ttd.net [wireless airo] PCI detection code fixes ChangeSet@1.1138, 2003-09-03 13:46:36-04:00, javier@tudela.mad.ttd.net [wireless airo] Build fixes when MIC disabled ChangeSet@1.1137, 2003-09-03 13:45:42-04:00, jgarzik@redhat.com Cset exclude: jgarzik@redhat.com|ChangeSet|20030826234629|07076 ChangeSet@1.1136, 2003-09-03 13:15:13-04:00, mlindner@syskonnect.de [netdrvr sk98lin] update to driver version 6.17 ChangeSet@1.1135, 2003-09-03 12:46:44-04:00, jgarzik@redhat.com [netdrvr 3c515] fix non-modular build ChangeSet@1.1134, 2003-09-03 12:45:35-04:00, jgarzik@redhat.com [netdrvr] add MV-64340 gigabit ethernet driver (MIPS only) Contributed via Marcelo via Ralf, the MIPS maintainer. ChangeSet@1.1133, 2003-09-03 12:35:33-04:00, xose@wanadoo.es [netdrvr 3c59x] update pci ids In 2.4.23-pre2 two pci.ids are missing and there is one duplicate. 2.6.0-preX driver is ok. ChangeSet@1.1119.1.13, 2003-09-03 13:35:30-03:00, marcelo@logos.cnet Cset exclude: agruen@suse.de|ChangeSet|20030902115108|61891 ChangeSet@1.1132, 2003-09-03 12:34:08-04:00, bunk@fs.tum.de [wireless airo] fix build with gcc 2.95 ChangeSet@1.1131, 2003-09-03 12:10:33-04:00, jgarzik@redhat.com Merge redhat.com:/spare/repo/linux-2.4 into redhat.com:/spare/repo/net-drivers-2.4 ChangeSet@1.1119.2.1, 2003-09-02 14:36:07-07:00, davem@nuts.ninka.net [IPV4]: Do not BUG() on icmp_xmit_lock() contention, just drop. ChangeSet@1.1119.1.11, 2003-09-02 18:11:13-03:00, bunk@fs.tum.de [PATCH] Fix IRQ_NONE clash in SCSI drivers On Wed, Aug 27, 2003 at 02:52:45PM -0300, Marcelo Tosatti wrote: >... > Summary of changes from v2.4.22 to v2.4.23-pre1 > ============================================ >... > Arnaldo Carvalho de Melo: > o irqreturn_t compatibility with 2.6 >... This change added an (empty) IRQ_NONE #define to interrupt.h. Several scsi drivers are already using an IRQ_NONE. Rename that to SCSI_IRQ_NONE (a similar change was done in 2.5 by Andrew Morton several months ago). I've tested the compilation with 2.4.23-pre2. Please apply Adrian ChangeSet@1.1119.1.10, 2003-09-02 10:21:42-03:00, khc@pm.waw.pl [PATCH] generic HDLC update Marcelo Tosatti writes: > Krzysztof, please send me a mail with "generic HDLC update" subject and > detailed changelog in the body, followed by the patch. (thats easier for > me to apply :)) As you wish: Looks like I lied - the DCD (carrier detect) isn't here as it needs more testing - it's in 2.6 only. Changes: * Documentation and spelling fixes * user can query PVC device for type and DLCI * private Frame Relay helper routines moved out of hdlc.h * added hdlc_type_trans() to simplify packet receive path and make tcpdump etc. happy * missing rtnl_lock()/rtnl_unload() bug in unregister_hdlc_device fixed * N2, C101: interrupt handler now works under high IRQ load from other devices (with previous versions, the IRQ processing for the card could sometimes stop after reaching "work limit") * Added Ethernet device emulation for raw HDLC. VLAN and bridging compatible, tested with RAD ChipBridge (ChipBridge doesn't work with full size VLAN frames, though). * Added Ethernet device emulation for bridged Ethernet frames on Frame-Relay. * no more "protocol 0008 is buggy" while using tcpdump, at last. * Frame-Relay DCE (network) side now sorts DLCI list in PVC FULL STATUS. Some FR DTE had problems with unsorted list. * Small changes to LMI logic with Frame-Relay. * raw HDLC now defaults to ITU-T 16-bit CRC. * fix for SCA-II based cards (drivers not in standard kernel) interrupt setting when using 2 ports. * there is now one detect_ram routine for all SCA-based cards. * hw drivers have now smaller TX packet rings to decrease TX latency for high priority packets (LMI etc) * fixed subtle transmit bug in c101.c which could lead to transmitter hangs and duplicated frames with SCA HD64570 working in 8-bit mode. * kmalloc(GFP_KERNEL) in interrupt context has been fixed. * Some __init etc fixes. * other misc fixes -- Krzysztof Halasa, B*FH ChangeSet@1.1119.1.9, 2003-09-02 08:51:08-03:00, agruen@suse.de [PATCH] fix setxattr const-ness Hello Marcelo, this is a fix I've already sent you earlier. It fixes the declaration of the value parameter of the setxattr inode operation, which is supposed to be const---it's a trivial bug. Please apply. Index: linux-2.4.23-pre2/fs/jfs/jfs_xattr.h =================================================================== ChangeSet@1.1119.1.8, 2003-09-01 20:57:39-04:00, jgarzik@redhat.com [PCI, ia32] don't assume "c->x86 > 6" applies to non-Intel CPUs when programming PCI cache line size. Just to be on the safe side. Suggested by Ingo Oeser. ChangeSet@1.1130, 2003-09-01 20:26:32-04:00, jgarzik@redhat.com [NET] move ethtool_op_set_tx_csum from 8139cp drvr to net/core/ethtool.c, where it belongs. ChangeSet@1.1129, 2003-09-01 17:23:07-04:00, jgarzik@redhat.com [netdrvr] sync with 2.5: epic100, fealnx, via-rhine, winbond-840 Minor cleanups and fixes: * whitespace * remove __devinitdata * irqreturn_t and pci_name() changes * set_bit removal (a fix) * C99 initializers ChangeSet@1.1128, 2003-09-01 17:12:15-04:00, jgarzik@redhat.com [netdrvr] ethtool_ops for epic100, fealnx, winbond-840, via-rhine ChangeSet@1.1119.1.6, 2003-09-01 17:08:23-03:00, m.c.p@wolk-project.de [PATCH] Disable alpha S3 Savage/VIACLE266 DRM support On Thursday 28 August 2003 00:21, Alan Cox wrote: Hi Alan, > My preference would be to leave the VIA and S3 modules out for the > moment and wait until the XFree DRI folks have the stuff working nicely. > Its in -ac because I'm hacking on it not because it works, is ready. > Or I guess you could just zap the config.in for them ? ok with me. Attached a patch ontop of the previous sent update. ChangeSet@1.1119.1.5, 2003-09-01 17:05:39-03:00, m.c.p@wolk-project.de [PATCH] Update DRI/DRM so XFree v4.3.0 and above works Hi Marcelo, Patch information: ------------------ - Update XFree DRM code to recent code from 2.4.22-rc2-ac3 - DRI now works with XFree v4.3.0 - ATI IGP chipset support added incl. pci ids, AGP support - Initial VIA CLE266 and S3 Savage DRM modules merges from VIA (These are marked up with some warnings and need a chunk of clean up work) - enabled 3dlabs GMX 2000 config option All compiles cleanly. r128 (ati rage 128) at least works perfectly with XFree v4.3.0. I have such a card :) Please apply for 2.4.23-pre2. Imho Alan said, it needs some cleanups but I think, Mikael too, that the cleanup should be made once it's in. ChangeSet@1.1119.1.4, 2003-09-01 16:11:03-03:00, cw@sgi.com [PATCH] SGI fetchop driver Marcelo, As discussed here is an updated version of the SGI SN fetchop (AMO) driver for inclusion: Config.in | 4 Makefile | 3 fetchop.c | 516 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 522 insertions(+), 1 deletion(-) # This is a BitKeeper generated patch for the following project: # Project Name: Linux kernel tree # This patch format is intended for GNU patch command version 2.5 or higher. # This patch includes the following deltas: # ChangeSet 1.1087 -> 1.1088 # drivers/char/Config.in 1.51 -> 1.52 # drivers/char/Makefile 1.36 -> 1.37 # (new) -> 1.1 drivers/char/fetchop.c # # The following is the BitKeeper ChangeSet Log # -------------------------------------------- # 03/08/27 cw@tomahawk.engr.sgi.com 1.1088 # Add SGI fetchop driver # -------------------------------------------- # ChangeSet@1.1127, 2003-09-01 15:03:22-04:00, jgarzik@redhat.com [NET] s/blog_dev/backlog_dev/ in process_backlog, net/core/dev.c This 100% cosmetic change reduces the diff between 2.4 and 2.5. ChangeSet@1.1125, 2003-09-01 14:56:29-04:00, jgarzik@redhat.com [NET] move netif_* helpers from tg3 driver to linux/netdevice.h Helpers moved: netif_poll_{enable,disable}, __netif_rx_complete, netif_tx_disable Use the helpers in net/core/dev.c. ChangeSet@1.1119.1.3, 2003-09-01 15:11:53-03:00, adam@os.inf.tu-dresden.de [PATCH] Add kmap_types.h to include/asm-alpha A kmap_types.h is needed to compile crypto on alpha. ChangeSet@1.1119.1.2, 2003-09-01 14:23:36-03:00, m.c.p@wolk-project.de [PATCH] aty128fb: find the video bios on a Latitude C600 (M3) Inspiron 8000 (M4) Hi Marcelo, this patch makes aty128fb find the video bios on a Latitude C600 (M3) and Inspiron 8000 (M4). Patch from Andreas Oberritter. Anyway, works. Please apply for 2.4.23-pre2. Thanks. ChangeSet@1.1123, 2003-09-01 13:03:50-04:00, jgarzik@redhat.com [netdrvr ne2k-pci] ethtool_ops support ChangeSet@1.1114.2.5, 2003-09-01 13:59:20-03:00, stelian@popies.net [PATCH] meye driver update Hi, This is a sync with the 2.5 meye driver. Nothing really important here, just makes it easier for me to maintain both branches. Marcelo, please apply. Thanks, Stelian. ===== drivers/media/video/meye.h 1.8 vs edited ===== ChangeSet@1.1114.2.4, 2003-09-01 13:58:56-03:00, stelian@popies.net [PATCH] reenable CAPTURE button in sonypi This attached patch reenables the CAPTURE button events in the sonypi driver, which were lost with the latest patch... The same patch should apply cleanly on both 2.4 and 2.6 kernels. Marcelo, Linus, please apply. Stelian. ===== drivers/char/sonypi.h 1.18 vs edited ===== ChangeSet@1.1114.2.3, 2003-09-01 13:57:49-03:00, javaman@katamail.com [PATCH] small config fix for ISDN Hi, trying to install modules in 2.4.22 I get this error: depmod: *** Unresolved symbols in /lib/modules/2.4.22/kernel/drivers/isdn/isdn.o depmod: sk_run_filter depmod: sk_chk_filter this is the fix for drivers/isdn/Config.in, please apply: ChangeSet@1.1122, 2003-09-01 12:56:54-04:00, jgarzik@redhat.com [netdrvr ne2k-pci] sync with 2.5 (100% minor cleanups) ChangeSet@1.1121, 2003-09-01 12:51:51-04:00, jgarzik@redhat.com [netdrvr ne2k-pci] allocate netdev+8390 struct using new alloc_ei_netdev() Also, call pci_disable_device() in PCI ->remove handler, to match pci_enable_device() in PCI ->probe handler. ChangeSet@1.1120, 2003-09-01 12:48:28-04:00, jgarzik@redhat.com [netdrvr 8390] new function alloc_ei_netdev() (preferred over alloc_etherdev + 8390-specific ethdev_init) ChangeSet@1.1114.2.2, 2003-09-01 10:30:31-03:00, marcelo@logos.cnet Merge http://linux-mh.bkbits.net/fw-loader-2.4 into logos.cnet:/home/marcelo/bk/linux-2.4 ChangeSet@1.1114.2.1, 2003-09-01 09:14:13-03:00, cw@sgi.com [PATCH] Remove kdb hooks from SGI Altix Console driver Marcelo, Keith does not want KDB distributed outside the main KDB patches. Please apply this incremental update to the SN serial/console driver. Thanks! --cw ChangeSet@1.1114.1.4, 2003-09-01 02:44:55-07:00, davem@nuts.ninka.net [IPV6]: Do not BUG() on icmp6 socket contention, just drop. ChangeSet@1.1114.1.3, 2003-09-01 01:12:11-07:00, xose@wanadoo.es [TG3]: ICH2 needs MBOX write reorder bug workaround too. ChangeSet@1.1119, 2003-08-31 20:09:19-04:00, jgarzik@redhat.com [netdrvr 8139cp] PCI MWI cleanup; remove unneeded workaround * The PCI layer now handles incorrect cacheline size settings, as it should. Remove our own workarounds. * Move pci_set_mwi up much earlier in the probe process, and check its return value. * Call pci_clear_mwi() in ->probe error handling * Call pci_clear_mwi() in ->remove ChangeSet@1.1117, 2003-08-31 15:38:40-04:00, hirofumi@mail.parknet.co.jp [netdrvr 8139too] don't start thread when it's not needed The thread for was unneeded on chips other than CH_8139_K/8129. So, this patch doesn't create the thread on chips other than CH_8139_K/8129. ChangeSet@1.1116, 2003-08-31 15:34:30-04:00, hirofumi@mail.parknet.co.jp [netdrvr 8139too] remove driver-based poisoning of net_device Harmless in 2.4, but causes oopses on rmmod in 2.6. slab poisoning can take care of this for us, anyway. ChangeSet@1.1101.5.1, 2003-08-31 12:22:46-03:00, marcelo@logos.cnet Change contact information, again. ChangeSet@1.1115, 2003-08-31 11:01:26-04:00, jgarzik@redhat.com [netdrvr 8139cp] must call NAPI-specific vlan hook ChangeSet@1.1101.1.5, 2003-08-31 09:53:21-04:00, jgarzik@redhat.com [BK] ignore auto-generated files lib/{crc32table.h,gen_crc32table} ChangeSet@1.1101.1.4, 2003-08-31 09:52:16-04:00, jgarzik@redhat.com [PCI] fix export of pdev_set_mwi/pci_generic_prep_mwi Missed in recent PCI MWI change. ChangeSet@1.1101.1.3, 2003-08-31 09:51:32-04:00, jgarzik@redhat.com [ia32] add PCI id for VIA irq router Noticed by Sebastian Reichelt. ChangeSet@1.1114, 2003-08-31 09:33:38-04:00, purna@jcom.home.ne.jp [netdrvr] fix skb_padto bugs introduced when skb_padto was introduced It seems that skb_padto security fixes in 2.4 and 2.5 trying to fix "CAN-2003-0001:Multiple ethernet NID device drivers do not pad frames with null bytes", do not put the skb_padto blocks in proper places in the 3c527, eth16i, fmv18x, seeq8005, yellowfin device drivers. In case a driver calls skb_padto(), it is possible that the space available in the original skb buffer tailroom is less than the space to pad. In this case, in short, the skb_padto() will create a new skb buffer, copy data from the original skb buffer to a new skb buffer, free the original buffer, and finally return the new buffer. If this happens to the aforementioned device drivers, they come to point to wrong data. And, for 3c527 and yellowfin, the drivers can unexpectedly double free the original skb buffers since they still point to the original skb buffers. The attached patch against 2.4.23pre1 fixes these issues. ChangeSet@1.1113, 2003-08-31 08:48:07-04:00, jgarzik@redhat.com [netdrvr 8139too] remove useless board names The only thing that differentiated most of the entries in the board_info[] table and the board_t type was the vendor branding string for the board. This table is a pain to maintain, so we prefer to simply use "RTL8129" or "RTL8139". ChangeSet@1.1112, 2003-08-31 08:40:01-04:00, lethal@linux-sh.org [netdrvr 8139too] fix and pci ids needed for SH platform a.k.a. Sega Broadband Adapter. ChangeSet@1.1111, 2003-08-31 08:17:34-04:00, jgarzik@redhat.com [netdrvr pcmcia] support SIOC[GS]MII{PHY,REG} ioctls Updated drivers; 3c574_cs, axnet_cs, pcnet_cs, xirc2ps_cs Thanks to Komuro for pointing this out. ChangeSet@1.1101.4.1, 2003-08-31 01:20:34-07:00, davem@nuts.ninka.net Merge nuts.ninka.net:/home/davem/src/BK/tg3-2.4 into nuts.ninka.net:/disk1/davem/BK/tg3-2.4 ChangeSet@1.1110, 2003-08-31 02:06:24-04:00, jgarzik@redhat.com [netdrvr 8139too] make features more persistent; fix PCI DAC mode * only set PCIDAC (64-bit PCI) bit in hardware if sizeof(dma_addr_t) > 32. Need a better test for whether 64-bit mode is _really_ needed. * cache chip command register in private struct. this allows the setting of rx-vlan, rx-csum, and other features to be persistent across the entire lifetime of the net device. * remove dead private struct members frag_skb, dropping_frag, and pci_using_dac. ChangeSet@1.1101.3.3, 2003-08-30 22:39:31-07:00, davem@nuts.ninka.net [SPARC64]: In sysv IPC translation, mask out IPC_64 as appropriate. Based upon a patch from Keith M Wesolowski ChangeSet@1.1101.3.2, 2003-08-30 22:21:31-07:00, davem@nuts.ninka.net [SPARC]: Fix uniprocessor build. ChangeSet@1.1109, 2003-08-31 00:48:20-04:00, jgarzik@redhat.com [netdrvr 8139cp] stats improvements and fixes * make sure rx_frags is still accounted * query RxMissed register, and clear, upon each get-stats func call ChangeSet@1.1101.2.1, 2003-08-30 20:45:22-07:00, laforge@netfilter.org [NETFILTER]: Fix routing key in ipt_MASQUERADE.c ChangeSet@1.1108, 2003-08-30 23:34:29-04:00, jgarzik@redhat.com [netdrvr 8139cp] bump version ChangeSet@1.1107, 2003-08-30 23:23:08-04:00, jgarzik@redhat.com [netdrvr 8139cp] fix NAPI bug; remove board_type distinction, not needed ChangeSet@1.1101.1.1, 2003-08-30 22:53:25-04:00, ink@jurassic.park.msu.ru [PCI] update Memory-Write-Invalidate (MWI) transaction support Sync up PCI MWI code with 2.5: - no changes required for drivers or architectures with HAVE_ARCH_PCI_MWI; - do respect BIOS settings: if the cacheline size is multiple of that we have expected, assume that this is on purpose; - assume cacheline size of 32 bytes for all x86s except K7/K8 and P4. Actually it's good for 386/486s as quite a few PCI devices do not support smaller values. ChangeSet@1.1106, 2003-08-30 22:44:26-04:00, jgarzik@redhat.com [netdrvr 8139cp] small cleanups * remove netif_queue_stopped test, netif_wake_queue already does that * move vlan stuff to top of file * remove __dev markers * update todo list at top of file * remove pci_set_dma_mask argument casts; ULL suffixes preferred. ChangeSet@1.1105, 2003-08-30 22:17:19-04:00, jgarzik@redhat.com [netdrvr 8139cp] remove mentions of RTL8169 (now handled by "r8169") ChangeSet@1.1104, 2003-08-30 22:14:04-04:00, jgarzik@redhat.com [netdrvr 8139cp] update todo list in header ChangeSet@1.1103, 2003-08-30 22:09:37-04:00, jgarzik@redhat.com [netdrvr 8139cp] support NAPI on RX path; Ditch RX frag handling. NAPI is turned on unconditionally for the RX path. The hardware supports interrupt mitigation, so that should be investigated too. RX fragment handling removed. We simply ensure that we alloc buffers large enough to hold incoming packets. Any stray RX frags that occur (shouldn't be any) will be dropped. ChangeSet@1.1102, 2003-08-30 21:01:59-04:00, jgarzik@redhat.com [netdrvr 8139cp] build TX checksumming code, but default OFF (previously it was ifdef'd) Also, bump version to 1.0. ChangeSet@1.1101, 2003-08-30 19:56:01-03:00, johnstul@us.ibm.com [PATCH] Convert /proc/interrupts to use seq_file Marcelo, All, This patch converts /proc/interrupts to use the seq_file interface on i386 (thanks to Randy for adding the seq "single" code). This prevents memory corruption caused by /proc/interrupts overflowing its page sized buffer on systems with high cpu and interrupt counts. Please consider for inclusion. thanks -john ChangeSet@1.1100, 2003-08-30 18:53:48-03:00, marcelo@logos.cnet Updated my contact information ChangeSet@1.1099, 2003-08-30 16:20:20-03:00, akpm@osdl.org [PATCH] inodes_stat.nr_inodes race fix Small fix to dispose_list() to ensure that inodes_stat.nr_inodes is protected by inode_lock. fs/inode.c | 19 +++++++++++-------- 1 files changed, 11 insertions(+), 8 deletions(-) ChangeSet@1.1096.1.32, 2003-08-30 14:23:17-03:00, ntfs@flatcap.org [PATCH] Fix NTFS build warnings Hi Marcelo, This patch: Fixes all NTFS build warnings Fixes some broken macros (debug build only) Gerardo Exequiel Pozzi sent you a patch to fix the NTFS build warnings. I have tested the patch and fixed a couple of broken macros he missed. Anton Altaparmakov has given the patch his seal of approval :-) Please can you apply the patch to 2.4.22-rc4 Cheers, FlatCap - Richard Russon ntfs@flatcap.org ChangeSet@1.1096.1.31, 2003-08-30 11:53:58-03:00, marcelo@logos.cnet Changed EXTRAVERSION to -pre2 TAG: v2.4.23-pre2 ChangeSet@1.1096.1.30, 2003-08-30 11:49:43-03:00, elenstev@mesatop.com [PATCH] Add six more Configure.help texts from the -ac tree Hi Marcelo, Here are another six Configure.help texts which have been sitting in Alan's tree for a while. Like the others, these texts originated in the development tree. The order in the -ac tree has be retained for easier re-merging. These six texts appear to be the last which are in the -ac tree and which are currently needed by mainline 2.4. Please apply. This patch was made against your current (this morning) bk tree. Steven CONFIG_BLK_DEV_TRIFLEX CONFIG_BLK_DEV_SC1200 CONFIG_BLK_DEV_PDC202XX_NEW CONFIG_MTD_CONCAT CONFIG_HP_SDC CONFIG_PDC_CONSOLE ChangeSet@1.1096.1.29, 2003-08-30 11:45:36-03:00, m.c.p@wolk-project.de [PATCH] DRM menu the right fix thanks for merging the DRM menu cleanup patch. But now looking at it, let's do it a different and the most right way. Delete the extra DRM-Config.in file and move it back to were it was again before the cleanup but with a mainmenu_option. This looks better and has the same effect, but w/o introducing another new file. ChangeSet@1.1096.1.27, 2003-08-30 11:37:30-03:00, lethal@linux-sh.org [PATCH] Add Paul Mundt to CREDITS Here's a quick patch to add myself to CREDITS, please apply. ChangeSet@1.1096.1.26, 2003-08-30 11:37:02-03:00, rddunlap@osdl.org [PATCH] add seq_file "single" interfaces Hi, This patch adds the seq_file "single" interfaces from 2.6.0-test4 to 2.4.22++. This will enable larger /proc/interrupts and /proc/mdstat, which currently have some oopsing problems with large outputs. Please apply. -- ~Randy patch_name: seq_single_2423p1.patch patch_version: 2003-08-25.09:34:59 author: Randy.Dunlap description: add seq_file "single" interfaces from 2.6.0-test4 product: Linux product_versions: 2422 diffstat: = fs/seq_file.c | 90 +++++++++++++++++++++++++++++++++++++++++++++-- include/linux/seq_file.h | 13 ++++++ 2 files changed, 100 insertions(+), 3 deletions(-) ChangeSet@1.1096.1.25, 2003-08-30 11:35:21-03:00, akpm@osdl.org [PATCH] tty oops fix Ancient bug, reported by Hiroshi Inoue : 1. login to tty2 (not tty1) 2. start kon (Kanji cONsole emulator, console which support Japanese characters) 3. exit kon 4. logout It oopses in the debugging function check_tty_count(), walking a list_head which has been list_del()'d. Call trace is: #0 check_tty_count (tty=0x10d42000, routine=0xc817b00 ".paths") at include/asm/processor.h:583 #1 0x022c6c00 in do_tty_hangup (data=0x10d42000) at drivers/char/tty_io.c:426 #2 0x022c6f60 in tty_vhangup (tty=0xc817b00) at drivers/char/tty_io.c:536 #3 0x022c6fcc in disassociate_ctty (on_exit=1) at drivers/char/tty_io.c:574 #4 0x02127aee in do_exit (code=0) at kernel/exit.c:718 #5 0x02127caa in do_group_exit (exit_code=0) at kernel/exit.c:796 #6 0x02127cbc in sys_exit_group (error_code=0) at kernel/exit.c:807 The tty refcount is zero, so everything seems consistent and sensible. The fix just uses list_del_init() on that list_head. drivers/char/tty_io.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) ChangeSet@1.1096.1.24, 2003-08-30 11:34:42-03:00, akpm@osdl.org [PATCH] fix possible busywait in rtc_read() If two processes are waiting in rtc_read(), only one will get the data. The other will madly spin around the loop in state TASK_RUNNING until another interrupt happens. Fix it by resetting TASK_INTERRUPTIBLE _inside_ the retry loop. drivers/char/rtc.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) ChangeSet@1.1096.1.23, 2003-08-30 11:32:03-03:00, willy@w.ods.org [PATCH] Fix log buffer length issues On Fri, Aug 29, 2003 at 01:14:19PM -0300, Marcelo Tosatti wrote: > I'm waiting for your selectable log buffer lengh fixes :) OK, Marcelo, here comes my proposed fix. Tom, does it look better for you ? BTW, Tom, I found the exact reason for the line which irritated you : #if !defined(CONFIG_LOG_BUF_SHIFT) || (CONFIG_LOG_BUF_SHIFT - 0 == 0) it was because because I was worried about CONFIG_LOG_BUG_SHIFT being defined to the empty string (a simple #define CONFIG_LOG_BUG_SHIFT is enough), as I remember it happened to me when working on it. But there's no reason here for this to happen, otherwise we would have far worse problems with values extracted from .config, so I fixed it. I added the config line to all archs. I used copy paste, so either I broke them all, either none. I'll start a compilation on my alpha while I'm on the way home, to check. I you have questions, please do ask. Cheers, Willy ChangeSet@1.1096.1.22, 2003-08-30 11:22:54-03:00, geert@linux-m68k.org [PATCH] Sonic Ethernet unsafe interrupt Sonic Ethernet: Use the interrupt safe version of dev_kfree_skb{_irq} within the interrupt handler (from Michael Müller) ChangeSet@1.1096.1.21, 2003-08-30 11:22:15-03:00, geert@linux-m68k.org [PATCH] lmc_proto.c includes lmc_proto.c includes , causing build failures on UMP-only architectures ChangeSet@1.1096.1.20, 2003-08-30 11:21:33-03:00, mike.miller@hp.com [PATCH] cciss multi-path failover in md Marcelo, Here's an updated failover patch created from your BK tree. I downloaded the tree this morning. I'm sorry it took me so long to get back to you. I've been working some HP related issues over the last few days. Please consider this for inclusion. Patch description: Enables multi-path failover support in md environments. Changes: 1. Sends a no-op command down to the controller and expects it to return in a very short time. 2. Adds the ability to extend the time in which the command can return. 3. Monitors the heartbeat register on the controller to cover the special case of a PCI Master Abort. Thanks, mikem ChangeSet@1.1096.1.19, 2003-08-30 11:20:44-03:00, geert@linux-m68k.org [PATCH] dmasound core fixes Dmasound core fixes from Christoph Hellwig in 2.6.0: - Some exported symbols are declared __init - in the modular case this is freed before the other modules can call it.. ChangeSet@1.1096.1.18, 2003-08-30 11:04:23-03:00, geert@linux-m68k.org [PATCH] M68k FPU emulator M68k FPU emulator: Add fgetman, fgetexp and fsqrt (from Michael Müller and Roman Zippel) ChangeSet@1.1096.1.17, 2003-08-30 11:03:50-03:00, geert@linux-m68k.org [PATCH] dmasound SOUND_PCM_READ_RATE dmasound: Implement missing SOUND_PCM_READ_RATE ioctl (from Richard Zidlicky) ChangeSet@1.1096.1.16, 2003-08-30 11:02:51-03:00, geert@linux-m68k.org [PATCH] M68k cpu_relax() M68k: Make cpu_relax() compatible with 2.6. ChangeSet@1.1096.1.15, 2003-08-30 11:01:56-03:00, geert@linux-m68k.org [PATCH] Dmasound invalid vs. illegal Dmasound: Use `invalid' instead of `illegal' (from 2.5.x) ChangeSet@1.1096.1.14, 2003-08-30 11:00:51-03:00, geert@linux-m68k.org [PATCH] M68k invalid vs. illegal M68k: Use `invalid' instead of `illegal' (from Steven Cole in 2.5.x) ChangeSet@1.1096.1.13, 2003-08-30 10:59:56-03:00, geert@linux-m68k.org [PATCH] M68k free_io_area() M68k: Take the gap into account in free_io_area() (from Michael Müller) ChangeSet@1.1096.1.12, 2003-08-30 10:58:54-03:00, geert@linux-m68k.org [PATCH] M68k mm cleanup M68k: Kill superfluous includes and obsolete commented-out code in mm code. ChangeSet@1.1096.1.11, 2003-08-30 10:58:36-03:00, geert@linux-m68k.org [PATCH] Rename ariadne2 to zorro8390 Rename ariadne2 to zorro8390, since this driver supports several NS8390-based Zorro Ethernet cards. Kill all never used occurrencies of CONFIG_NE2K_ZORRO. ChangeSet@1.1096.1.10, 2003-08-30 10:56:49-03:00, geert@linux-m68k.org [PATCH] M68k RTC updates M68k: Use genrtc on all m68k platforms ChangeSet@1.1096.1.9, 2003-08-30 10:55:16-03:00, geert@linux-m68k.org [PATCH] fb_cmap and transparency If a colormap contains no transparency information, fb_set_cmap() calls fb_setcolreg() with trans = 0. This causes all CLUT entries to be fully transparent on hardware that does have transparency information in the CLUT registers. The following patch solves this problem by changing the default transparency from 0 (full transparent) to 0xffff (full opaque). ChangeSet@1.1096.1.8, 2003-08-30 10:52:24-03:00, geert@linux-m68k.org [PATCH] Isapnp warning Isapnp: Kill warning if CONFIG_PCI is not set, like it's done in 2.6.0. ChangeSet@1.1096.1.7, 2003-08-30 10:51:06-03:00, geert@linux-m68k.org [PATCH] M68k ptrace M68k: Use ptrace_check_attach instead of doing the checks ourselves (from Andreas Schwab). ChangeSet@1.1096.1.5, 2003-08-30 10:40:43-03:00, thomas@winischhofer.net [PATCH] sisfb update Marcelo, attached is an update for the sis framebuffer driver. As usual, heavily tested. Reduces source size by about 5000 lines... Please apply. Thomas ChangeSet@1.1096.1.4, 2003-08-30 10:39:17-03:00, andrea@suse.de [PATCH] vmalloc allocations in ipc needs smp initialized Hi Marcelo, I submit you this patch for 2.4.23 merging. In short if you change SEMMNI to 8192 the kernel will crash at boot, beause it tries to call vmalloc before the smp is initialized. The reason is that vmalloc calls into the pte alloc code, and the fast pte alloc is tried first, but that reads into the pte_quicklist, that requires the cpu_data to be initialized (and that happens in smp_init()). the patch is obviously safe, since no piece of kernel (especially the code in the check_bugs and smp_init paths ;) calls into the ipc subsystem. The reason this started to trigger wasn't really that we increased SEMMNI, but what happend is that some IPC data structure grown, and for some reason the corruption due the uninitalized pte_quicklist triggers only for smp boxes with less than 1G (not very common anymore ;). So it wasn't immediatly reproducible on all setups. 2.6 doesn't suffer from the same problem, simply because 2.6 isn't using the quicklist anymore, but I think it would be much more correct to make the same change in 2.6 too, since whatever cond_resched() in the vm paths (and they're definitely allowed to call it), will lead to a crash since the init task isn't initialized and the scheduler can't be invoked yet. (and 2.6 already has the bigger data structures that should trigger the vmalloc all the time on all setups) ChangeSet@1.1096.5.40, 2003-08-30 10:19:18-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: resend - mm checks have precedence bugs ChangeSet@1.1096.5.39, 2003-08-30 10:09:02-03:00, marcelo@logos.cnet add sysctl bits for setuid core ChangeSet@1.1096.5.38, 2003-08-30 09:55:31-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: Fix the file sharing/initrd bug ChangeSet@1.1096.5.37, 2003-08-30 09:55:07-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: Add headers for wolfson codecs ChangeSet@1.1096.5.36, 2003-08-30 09:54:44-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: add sysctl number for setuid core ChangeSet@1.1096.5.35, 2003-08-30 09:50:13-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: allow setuid core dumps In some situations you want to get dumps of setuid apps, either because you administer the system or because you have a secure area to collect them all (remember core path is configurable too). If the admin enables them this patch dumps setuid core files as root owned files in the nominated location. The default behaviour remains that users dont get core of setuid files. This has been in -ac for a while and is from RH work done at the request of various large users who collect all their cores in a dump dir ChangeSet@1.1096.5.34, 2003-08-30 09:47:38-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: tdfxfb updates for 24/32 and big endian ChangeSet@1.1096.5.33, 2003-08-30 09:46:49-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: VGA also works on IA64 ChangeSet@1.1096.5.32, 2003-08-30 09:46:20-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: USB audio fixes for OSS API compliance ChangeSet@1.1096.5.31, 2003-08-30 09:45:26-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: makefile/config update for sound changes ChangeSet@1.1096.5.30, 2003-08-30 09:45:18-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: fix i810 audio leak ChangeSet@1.1096.5.29, 2003-08-30 09:42:16-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: cmpci update ChangeSet@1.1096.5.28, 2003-08-30 09:41:54-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: ALi5455 update ChangeSet@1.1096.5.27, 2003-08-30 09:41:20-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: ad1889 error handling fixes ChangeSet@1.1096.5.26, 2003-08-30 09:40:37-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: wolfson ac97 touchscreen driver ChangeSet@1.1096.5.25, 2003-08-30 09:39:35-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: aacraid update ChangeSet@1.1096.5.24, 2003-08-30 09:38:40-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: update cpia driver to fix warnings ChangeSet@1.1096.5.23, 2003-08-30 09:37:46-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: Add disk hotplug to the IDE core IFF your hardware supports it you can now do hdparm -b0 /dev/hda remove device replace with different device hdparm -b1 /dev/hda This has been tested a fair bit with thinkpad laptops but not extensively hammered with other controllers supporting the facility (some HPT/SI cards). Also note that in general even the hardware supporting it does not support hotplug in a master/slave setup - that is a hardware limit. ChangeSet@1.1096.5.22, 2003-08-30 09:30:31-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: split ide probe code up Lots of probe internals are needed for hotplug too so we split it into a set of meaningful routines and export the right bits ChangeSet@1.1096.5.21, 2003-08-30 09:29:51-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: fix cable detect issue with sata ChangeSet@1.1096.5.20, 2003-08-30 09:13:21-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: update ide headers for hotplug ChangeSet@1.1096.5.19, 2003-08-30 09:10:29-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: update ide raid for info pointer changes ChangeSet@1.1096.5.18, 2003-08-30 08:58:15-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: siimage: set a sata flag on the hwif so we can do cable det ChangeSet@1.1096.5.17, 2003-08-30 08:57:01-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: Add Intel ICH3 hotplug support This covers quite a few laptops ChangeSet@1.1096.5.16, 2003-08-30 08:55:38-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: move sibyte driver into the right dir ChangeSet@1.1096.5.15, 2003-08-30 08:52:47-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: add open/close methods to ide-default for hotplug ChangeSet@1.1096.5.14, 2003-08-30 08:51:50-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: fix missing formatting info in ide-cd ChangeSet@1.1096.5.13, 2003-08-30 08:50:45-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: fix nowayout handling on softdog ChangeSet@1.1096.5.12, 2003-08-30 08:49:35-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: warning fix ChangeSet@1.1096.5.11, 2003-08-30 08:48:46-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: fix a missing rocket card ChangeSet@1.1096.5.10, 2003-08-30 00:38:23-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: improved extra key bounce fix ChangeSet@1.1096.5.9, 2003-08-30 00:36:46-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: update i8xx watchdog ChangeSet@1.1096.5.8, 2003-08-30 00:32:59-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: amd watchdog update ChangeSet@1.1096.5.7, 2003-08-30 00:30:41-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: wolfson touchscreen docs #ra1 ChangeSet@1.1096.5.6, 2003-08-30 00:29:59-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: update INDEX for docs ChangeSet@1.1096.5.5, 2003-08-30 00:29:40-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: replace the pci router logic with working code This is more verbose but actually uses less memory as its all __init unlike the big table. The table also fails because there are controllers that have dependancies for routing on either additional components (440GX) or version (SiS) which it could not handle. ChangeSet@1.1096.5.4, 2003-08-30 00:10:18-03:00, alan@lxorguk.ukuu.org.uk [PATCH] PATCH: remove all the 440gx broken bios stuff There is a better way to fix this and the SiS and other bits in the PCI layer. That fix means this bit can go ChangeSet@1.1096.5.3, 2003-08-29 23:18:59-03:00, cw@sgi.com [PATCH] SGI SN Serial/Console Driver Marcelo, As discussed here is the serial & console driver required for Altix systems. Documentation/Configure.help | 11 drivers/char/Config.in | 6 drivers/char/Makefile | 1 drivers/char/sn_serial.c | 1190 +++++++++++++++++++++++++++++++++ drivers/char/tty_io.c | 7 5 files changed, 1215 insertions(+) # This is a BitKeeper generated patch for the following project: # Project Name: Linux kernel tree # This patch format is intended for GNU patch command version 2.5 or higher. # This patch includes the following deltas: # ChangeSet 1.1086 -> 1.1087 # drivers/char/Config.in 1.50 -> 1.51 # drivers/char/tty_io.c 1.26 -> 1.27 # Documentation/Configure.help 1.182 -> 1.183 # drivers/char/Makefile 1.35 -> 1.36 # (new) -> 1.2 drivers/char/sn_serial.c # # The following is the BitKeeper ChangeSet Log # -------------------------------------------- # 03/08/27 cw@tomahawk.engr.sgi.com 1.1087 # Add SGI l1 Serial/Console Driver # -------------------------------------------- # ChangeSet@1.1096.5.2, 2003-08-29 13:27:42-03:00, marcelo@logos.cnet Delete unused drivers/scsi/aic79xx (now aic7xxx supports it) .del-scsi_message.h~702d04df39cec421: Delete: drivers/scsi/aic79xx/scsi_message.h .del-scsi_iu.h~19dfb28b403d5076: Delete: drivers/scsi/aic79xx/scsi_iu.h .del-queue.h~22333ebc4752ba27: Delete: drivers/scsi/aic79xx/queue.h .del-cam.h~142be79aa2e7b6e4: Delete: drivers/scsi/aic79xx/cam.h .del-aiclib.h~91a202de5ec07b45: Delete: drivers/scsi/aic79xx/aiclib.h .del-aiclib.c~4f9c5e58fe29475f: Delete: drivers/scsi/aic79xx/aiclib.c .del-aic79xx_seq.h~f087a47d39ec35d1: Delete: drivers/scsi/aic79xx/aic79xx_seq.h .del-aic79xx_reg_print.c~4602f821bb30aa98: Delete: drivers/scsi/aic79xx/aic79xx_reg_print.c .del-aic79xx_reg.h~2a5d1aeafe35d774: Delete: drivers/scsi/aic79xx/aic79xx_reg.h .del-aic79xx_proc.c~65ba7c0cbcae9e17: Delete: drivers/scsi/aic79xx/aic79xx_proc.c .del-aic79xx_pci.c~f3be49004874d74d: Delete: drivers/scsi/aic79xx/aic79xx_pci.c .del-aic79xx_osm_pci.c~ce497673678cc8cb: Delete: drivers/scsi/aic79xx/aic79xx_osm_pci.c .del-aic79xx_osm.h~a9993aeb34f68385: Delete: drivers/scsi/aic79xx/aic79xx_osm.h .del-aic79xx_osm.c~c85edf4627f2d3b8: Delete: drivers/scsi/aic79xx/aic79xx_osm.c .del-aic79xx_inline.h~4fe599bddc047da0: Delete: drivers/scsi/aic79xx/aic79xx_inline.h .del-aic79xx_core.c~3acdfe0b216b89b2: Delete: drivers/scsi/aic79xx/aic79xx_core.c .del-aic79xx.seq~1fc373c5c245fa53: Delete: drivers/scsi/aic79xx/aic79xx.seq .del-aic79xx.reg~c7d1afd63bee29d: Delete: drivers/scsi/aic79xx/aic79xx.reg .del-aic79xx.h~f52414d5ceae1d0c: Delete: drivers/scsi/aic79xx/aic79xx.h .del-Makefile~170d5d2f4fc1242d: Delete: drivers/scsi/aic79xx/Makefile .del-Config.in~5417c5049523b240: Delete: drivers/scsi/aic79xx/Config.in .del-CHANGELOG~d01c3638ccfa2574: Delete: drivers/scsi/aic79xx/CHANGELOG ChangeSet@1.1096.5.1, 2003-08-29 13:17:06-03:00, masanari.iida@hp.com [PATCH] SCSI blacklist HP Va7140 As Stefan Schindewolf reported on 25/Aug 2003 on Kernel mailing list, scsi_scan.c has missing entory and also typo. Apply this patch on 2.4.23-preX. Regards, masanari ChangeSet@1.1096.4.6, 2003-08-29 21:11:09+10:00, paulus@samba.org PPC32: Implement semtimedop system call. ChangeSet@1.1096.4.5, 2003-08-29 20:56:54+10:00, paulus@samba.org PPC32: Restructure signal code, new ucontext structure, add swapcontext syscall. The ucontext struct now corresponds with glibc's new ucontext_t. The old ucontext didn't actually have room for all the registers, and it had to be changed to allow setcontext et al. to be implemented. This means that the stack layout for real-time signal delivery has changed slightly. Existing applications using the uc_mcontext.regs pointer will still work since the new uc_regs field is in the same position and points to the start of the mcontext, where the registers are saved. We now save the vector registers on the stack on signal delivery if the process has ever used any altivec instructions (since the last exec). Swapcontext is implemented as a system call because it isn't possible to set all three of LR, CTR and the instruction pointer to arbitrary values at user level, and because the kernel knows whether the FP and vector registers are owned by this process and can optimize in the case that they aren't. With the swapcontext system call we can implement setcontext, getcontext and swapcontext. ChangeSet@1.1096.4.4, 2003-08-29 20:37:52+10:00, paulus@samba.org PPC32: Minor cleanups and fixes for 4xx/BookE systems ChangeSet@1.1096.4.3, 2003-08-29 19:08:02+10:00, paulus@samba.org PPC32: Add support for the PPC970 processor. ChangeSet@1.1096.4.2, 2003-08-29 17:22:05+10:00, paulus@samba.org PPC32: Use CONFIG_IBM_OPENBIOS instead of CONFIG_TREEBOOT ChangeSet@1.1083.4.5, 2003-08-29 14:31:33+10:00, mporter@kernel.crashing.org PPC32: Add support for DMA controllers on PPC 4xx processors. ChangeSet@1.1096.3.1, 2003-08-28 22:20:32-04:00, jgarzik@redhat.com [scsi] add SCSI opcodes and SAM status codes to scsi/scsi.h Added: report luns, read/write 16, read capacity 16, and the SAM_STAT_xxx set of constants. ChangeSet@1.1083.2.9, 2003-08-28 13:50:03-07:00, russell_d_cagle@mindspring.com [PATCH] USB: add Garmin iQue support to visor driver ChangeSet@1.1083.5.4, 2003-08-28 13:09:28-07:00, greg@kroah.com [PATCH] PCI: add PCI_DEVICE_CLASS() macro to match PCI_DEVICE() macro. ChangeSet@1.1083.5.3, 2003-08-28 13:09:20-07:00, greg@kroah.com [PATCH] PCI: add PCI_DEVICE() macro to make pci_device_id tables easier to read. ChangeSet@1.1096, 2003-08-28 16:14:21-03:00, cw@sgi.com [PATCH] Add SGI IOC4 IDE Driver Marcelo, As discussed here is patch against you BK tree to add the SGI IOC4 IDE driver will all complaints addressed! Documentation/Configure.help | 6 MAINTAINERS | 5 drivers/ide/Config.in | 3 drivers/ide/pci/Makefile | 1 drivers/ide/pci/sgiioc4.c | 891 +++++++++++++++++++++++++++++++++ drivers/ide/pci/sgiioc4.h | 177 ++++++ include/linux/pci_ids.h | 1 7 files changed, 1084 insertions(+) *Please* apply this :) # This is a BitKeeper generated patch for the following project: # Project Name: Linux kernel tree # This patch format is intended for GNU patch command version 2.5 or higher. # This patch includes the following deltas: # ChangeSet 1.1085 -> 1.1086 # drivers/ide/pci/Makefile 1.4 -> 1.5 # include/linux/pci_ids.h 1.69 -> 1.70 # MAINTAINERS 1.105 -> 1.106 # drivers/ide/Config.in 1.35 -> 1.36 # Documentation/Configure.help 1.181 -> 1.182 # (new) -> 1.1 drivers/ide/pci/sgiioc4.c # (new) -> 1.1 drivers/ide/pci/sgiioc4.h # # The following is the BitKeeper ChangeSet Log # -------------------------------------------- # 03/08/27 cw@tomahawk.engr.sgi.com 1.1086 # Add IOC4 IDE driver for SGI Altix Systems # -------------------------------------------- # ChangeSet@1.1095, 2003-08-28 16:07:55-03:00, marcelo@logos.cnet Fix compilation warning in panic.c ChangeSet@1.1094, 2003-08-28 15:59:11-03:00, marcelo@logos.cnet Changed hch contact information ChangeSet@1.1093, 2003-08-28 15:57:38-03:00, elenstev@mesatop.com [PATCH] Add 39 Configure.help texts from -ac tree. Hi Marcelo, This patch cleans up some old information at the top of the Configure.help file, and adds help tests for the following 39 options. The help texts originally came from the development kernel, and were ported to 2.4 form by myself and others. A few help texts containing copy and paste errors in 2.6 were corrected. These help texts were accepted by Alan into his -ac tree. I retained their position from Alan's Configure.help file to minimize difficulty in merging for Bernhard R. in maintaining the (p)ac tree when you merge these into your tree (I hope). Please apply this. The patch is made against your current 2.4-bk tree. There are a few more of these, but this should be enough for now. Thanks, Steven CONFIG_IP6_NF_MATCH_AHESP CONFIG_IP6_NF_MATCH_RT CONFIG_IP6_NF_MATCH_OPTS CONFIG_IP6_NF_MATCH_FRAG CONFIG_IP6_NF_MATCH_HL CONFIG_IP6_NF_MATCH_IPV6HEADER CONFIG_FUSION_MAX_SGE CONFIG_QDIO CONFIG_QDIO_PERF_STATS CONFIG_IEEE1394_OUI_DB CONFIG_MTD_REDWOOD CONFIG_MTD_NAND_AUTCPU12 CONFIG_MTD_NAND_EDB7312 CONFIG_I2C_KEYWEST CONFIG_DRM_I830 CONFIG_HISAX_ENTERNOW_PCI CONFIG_CPU_ICACHE_DISABLE CONFIG_CPU_DCACHE_DISABLE CONFIG_CPU_DCACHE_WRITETHROUGH CONFIG_CPU_CACHE_ROUND_ROBIN CONFIG_CPU_BPREDICT_DISABLE CONFIG_ZBOOT_ROM CONFIG_ZBOOT_ROM_TEXT CONFIG_ZBOOT_ROM_BSS CONFIG_USB_BRLVGER CONFIG_USB_KBTAB CONFIG_USB_SERIAL_EDGEPORT_TI CONFIG_USB_SERIAL_KEYSPAN_MPR CONFIG_CHECKING CONFIG_CHASSIS_LCD_LED CONFIG_GSC CONFIG_GSC_WAX CONFIG_GSC_DINO CONFIG_HPET_TIMER CONFIG_GART_IOMMU CONFIG_INIT_DEBUG CONFIG_IOMMU_DEBUG CONFIG_IOMMU_LEAK CONFIG_HVC_CONSOLE ChangeSet@1.1083.5.2, 2003-08-28 11:27:38-07:00, vmlinuz386@yahoo.com.ar [PATCH] PCI Hotplug: fix __FUNCTION__ warnings this patch fix the warning: concatenation of string literals with __FUNCTION__ is deprecated ChangeSet@1.1083.5.1, 2003-08-28 11:23:37-07:00, greg@kroah.com [PATCH] PCI hotplug: fix up a bunch of copyrights that were incorrectly declared. It needs to be "Copyright (C)" not "Copyright (c)" according to the lawyers who know these things... ChangeSet@1.1083.2.8, 2003-08-28 11:14:28-07:00, greg@kroah.com [PATCH] USB: fix up a bunch of copyrights that were incorrectly declared. It needs to be "Copyright (C)" not "Copyright (c)" according to the lawyers who know these things... ChangeSet@1.1083.2.7, 2003-08-28 11:05:57-07:00, Stefan.Becker@nokia.com [PATCH] USB: acm.c update for new devices This support is already in 2.6 ChangeSet@1.1083.2.6, 2003-08-28 11:05:50-07:00, ddstreet@ieee.org [PATCH] USB: backport usbfs 'disconnect' here is a backport of the usbfs 'disconnect' functionality. The only difference I know of from the 2.5 code is this doesn't use the kernel lock. I'm not sure if that is really needed? Anyway it would be great to finally get this into 2.4... ChangeSet@1.1083.2.5, 2003-08-28 11:05:43-07:00, abbotti@mev.co.uk [PATCH] USB: ftdi_sio - tidy up write bulk callback On Tuesday 19 Aug 2003 21:57, Greg KH wrote: > On Tue, Aug 19, 2003 at 05:14:28PM +0100, Ian Abbott wrote: > > The attached patch (usb-2.4-ftdi_sio-wbcbfix.patch) reinstates > > the port->open_count check in the ftdi_write_bulk_callback > > function, and should be applied after my earlier patch > > 'usb-2.4-ftdi_sio-wbcleanup.patch'. > > So you're just really getting rid of the "serial" pointer check, > right? That's fine, but can you send me just one patch that does > this instead? The attached patch combines the changes, but apart from a tiny reduction in code size, it doesn't achieve anything, but doesn't seem to cause any harm either. I'll leave it to your discretion whether or not to apply it. As I mentioned previously, leaving the port->open_count check in (to only schedule a soft interrupt when the port is open) seems to prevent an oops, but I suppose it just makes the oops less likely to happen rather than eliminate it entirely. ChangeSet@1.1083.2.4, 2003-08-28 10:52:44-07:00, stern@rowland.harvard.edu [PATCH] USB: Another unusual_devs.h entry update This information was provided by Anthony Arkles . Please apply to both 2.4 and 2.6. ChangeSet@1.1083.4.4, 2003-08-28 22:40:33+10:00, paulus@samba.org PPC32: Fix typo in arch/ppc/Makefile ChangeSet@1.1083.4.3, 2003-08-28 22:31:07+10:00, mporter@kernel.crashing.org PPC32: Add support for the IBM PPC 440 family of processors. This adds support for the 440GP and 440GX, which are the first "Book E" processors from IBM. This also adds support for the "Ebony" (440GP) and "Ocotea" (440GX) reference boards. ChangeSet@1.1083.4.2, 2003-08-28 21:35:03+10:00, paulus@samba.org PPC32: Add the infrastructure to allow for 64-bit PTEs. The IBM PPC440 family allow a 36-bit physical address and this will let us support them. ChangeSet@1.1083.4.1, 2003-08-28 20:51:53+10:00, paulus@samba.org PPC32: Add support for DMA mapping on non-cache-coherent machines. ChangeSet@1.1065.9.50, 2003-08-28 00:23:40-07:00, xose@wanadoo.es [TG3]: More missing PCI ids. ChangeSet@1.1083.3.3, 2003-08-28 00:12:38-07:00, rob@osinvestor.com [SPARC]: gcc-3.3 compile fixes, part 3. ChangeSet@1.1083.3.2, 2003-08-28 00:11:25-07:00, rob@osinvestor.com [SPARC]: gcc-3.3 compile fixes, part 2. ChangeSet@1.1083.3.1, 2003-08-28 00:11:05-07:00, rob@osinvestor.com [SPARC]: gcc-3.3 compile fixes, part 1. ChangeSet@1.1065.9.49, 2003-08-27 23:37:21-07:00, jgarzik@redhat.com [TG3]: Remove pci-set-dma-mask casts. ChangeSet@1.1091.1.16, 2003-08-27 18:03:18-04:00, willy@debian.org [netdrvr 8139too] ethtool_ops support ChangeSet@1.1091.1.15, 2003-08-27 17:55:34-04:00, willy@debian.org [ethtool] fix ethtool_get_strings counting bug ChangeSet@1.1091.1.14, 2003-08-27 17:43:01-04:00, shmulik.hen@intel.com [netdrvr bonding] Enhance netdev notification handling. Also, add comment block and bump version. ChangeSet@1.1091.1.13, 2003-08-27 17:42:26-04:00, shmulik.hen@intel.com [netdrvr bonding] Consolidate /proc code, add CHANGENAME handler ChangeSet@1.1091.1.12, 2003-08-27 17:41:56-04:00, shmulik.hen@intel.com [netdrvr bonding] support for changing MAC addr, MTU in ALB/TLB modes ChangeSet@1.1091.1.11, 2003-08-27 17:41:18-04:00, shmulik.hen@intel.com [netdrvr bonding] support for changing HW address and MTU ChangeSet@1.1091.1.10, 2003-08-27 17:40:43-04:00, shmulik.hen@intel.com [netdrvr bonding] Decouple promiscuous handling from the multicast mode setting. ChangeSet@1.1091.1.9, 2003-08-27 17:40:13-04:00, shmulik.hen@intel.com [netdrvr bonding] Modes that don't use primary don't use the new prop. code ChangeSet@1.1091.1.8, 2003-08-27 17:39:31-04:00, shmulik.hen@intel.com [netdrvr bonding] Change monitoring function to use new slave setting propagation ChangeSet@1.1091.1.7, 2003-08-27 17:38:40-04:00, shmulik.hen@intel.com [netdrvr bonding] update slave setting propagation Distinguish between modes that use a primary slave from those that don't, and propagate settings accordingly; Consolidate change_active opeartions and add reselect_active and find_best opeartions. ChangeSet@1.1091.1.6, 2003-08-27 17:31:35-04:00, shmulik.hen@intel.com [netdrvr bonding] add another ifenslave.c include ChangeSet@1.1091.1.5, 2003-08-27 17:31:05-04:00, shmulik.hen@intel.com [netdrvr bonding] update credits/version ChangeSet@1.1091.1.4, 2003-08-27 17:30:18-04:00, shmulik.hen@intel.com [netdrvr bonding] use linked list to handle multiple bond devices ChangeSet@1.1091.1.3, 2003-08-27 17:28:40-04:00, shmulik.hen@intel.com [netdrvr bonding] fix /proc read function ChangeSet@1.1091.1.2, 2003-08-27 17:26:39-04:00, shmulik.hen@intel.com [list] backport list_for_each_entry_safe macro from 2.6 ChangeSet@1.1083.2.2, 2003-08-27 11:36:30-03:00, marcelo@logos.cnet Changed EXTRAVERSION to -pre1 TAG: v2.4.23-pre1 ChangeSet@1.1083.2.1, 2003-08-27 11:07:03-03:00, marcelo@logos.cnet Fix possible IRQ handling SMP race: Kudos to TeJun Huh ChangeSet@1.1083.1.1, 2003-08-27 05:20:22-07:00, davem@kernel.bkbits.net Merge davem@nuts.ninka.net:/home/davem/src/BK/tg3-2.4 into kernel.bkbits.net:/home/davem/tg3-2.4 ChangeSet@1.1091, 2003-08-26 19:46:29-04:00, jgarzik@redhat.com [wireless airo] build fixes ChangeSet@1.1090, 2003-08-26 19:40:44-04:00, javier@tudela.mad.ttd.net [wireless airo] add support for MIC and latest firmwares ChangeSet@1.1089, 2003-08-26 19:37:39-04:00, greg@kroah.com [netdrvr sis900] don't call pci_find_device from irq context I realized that I've had this patch in my tree for a while, and forgot to send it to you and lkml. The patch below fixes bug number 923: http://bugme.osdl.org/show_bug.cgi?id=923 (basically keeps us from calling pci_find_device from interrupt context.) It's been tested by a few people with this device, and they say it works just fine for them. Please forward it on up the food chain. ChangeSet@1.1088, 2003-08-26 19:20:47-04:00, hirofumi@mail.parknet.co.jp [netdrvr 8139too] add more h/w revision ids ChangeSet@1.1087, 2003-08-26 19:18:51-04:00, hirofumi@mail.parknet.co.jp [netdrvr 8139too] remove unused RxConfigMask ChangeSet@1.1086, 2003-08-26 19:16:58-04:00, hirofumi@mail.parknet.co.jp [netdrvr 8139too] lwake unlock fix ChangeSet@1.1085, 2003-08-26 19:11:37-04:00, srompf@isg.de [netdrvr 8139too] use mii_check_media lib function, instead of homebrew MII bitbanging. ChangeSet@1.1076.1.14, 2003-08-26 18:33:48-04:00, jgarzik@redhat.com [netdrvr 8139too] minor bits from 2.6 Keeping the driver in sync to ease maintenance headaches. ChangeSet@1.1076.1.13, 2003-08-26 17:41:18-04:00, jgarzik@redhat.com [netdrvr pcmcia] ethtool_ops support for several more pcmcia drivers Drivers updated: fmvj18x_cs, ibmtr_cs, netwave_cs, nmclan_cs, pcnet_cs, ray_cs, wavelan_cs, xirc2ps_cs, xircom_cb. ChangeSet@1.1076.1.12, 2003-08-26 17:26:13-04:00, jgarzik@redhat.com [netdrvr pcmcia] use SET_ETHTOOL_OPS in 3c574, 3c589, aironet4500, and axnet ChangeSet@1.1076.1.11, 2003-08-26 17:15:08-04:00, jgarzik@redhat.com [NET] add SET_ETHTOOL_OPS back-compat hook ChangeSet@1.1076.1.10, 2003-08-26 17:11:53-04:00, jgarzik@redhat.com [netdrvr pcmcia] ethtool_ops for 3c574, 3c589, aironet4500, axnet ChangeSet@1.1076.1.9, 2003-08-26 16:39:48-04:00, jgarzik@redhat.com [netdrvr] ethtool_ops support for 3c515, 3c523, 3c527, and dmfe ChangeSet@1.1076.1.8, 2003-08-26 16:28:32-04:00, jgarzik@redhat.com [netdrvr] ethtool_ops support in 3c503, 3c505, 3c507 ChangeSet@1.1076.1.7, 2003-08-26 16:18:55-04:00, jgarzik@redhat.com [netdrvr 3c501] ethtool_ops support ChangeSet@1.1076.1.6, 2003-08-26 16:12:29-04:00, jgarzik@redhat.com [netdrvr 3c59x] add a piece missed in previous ethtool_ops patch Contributed by Matthew Wilcox. ChangeSet@1.1076.1.5, 2003-08-26 15:38:11-04:00, jgarzik@redhat.com [netdrvr 8139cp] ethtool_ops support ChangeSet@1.1083, 2003-08-26 16:05:07-03:00, johnstul@us.ibm.com [PATCH] Handle clustered XAPIC in set_ioapic_affinity() Marcelo, All, In set_ioapic_affinity() we take a cpu mask which we normally pass into the apic. However, on xapics in clustered physical mode (ie: x440s) we need to convert this mask into a physical apicid before sending it to the apic. If clustered_apic_mode is XAPIC, this patch selects the lowest cpu in the mask and routes the interrupts there. This avoids timedoubling and other interrupt misdirection seen on x440s after playing with /proc/irq/x/smp_affinity. Please apply. thanks -john ChangeSet@1.1082, 2003-08-26 16:01:48-03:00, stelian@popies.net [PATCH] meye driver updates The attached patch updates the meye driver with some tiny changes: * use SetPageReserved instead of mem_map_reserve, and remove the wrapper.h dependency * document the supported hardware. ===== Documentation/video4linux/meye.txt 1.6 vs edited ===== ChangeSet@1.1081, 2003-08-26 16:01:08-03:00, stelian@popies.net [PATCH] sonypi driver update Hi, Now that we are starting a new -pre cycle, here are the latest sonypi updates: * document the fact that FX501/FX702 laptops are not supported * add battery insert/remove events (thanks to Daniel K.) * improve the event detection using a different port offset on 'type2' models (thanks to Daniel K.) * now that ACPI is finally in the kernel, simplify the ACPI tests. Marcelo, please apply. Stelian. ===== Documentation/sonypi.txt 1.12 vs edited ===== ChangeSet@1.1076.1.4, 2003-08-26 14:47:50-04:00, jgarzik@redhat.com [netdrvr 8139cp] minor bits from 2.6 ChangeSet@1.1076.1.3, 2003-08-26 14:45:14-04:00, jgarzik@redhat.com [netdrvr sis900] minor bits from 2.6 ChangeSet@1.1076.1.2, 2003-08-26 14:42:50-04:00, jgarzik@redhat.com [netdrvr sis900] ethtool_ops support ChangeSet@1.1080, 2003-08-26 15:37:53-03:00, hch@lst.de [PATCH] reserve a sysctl number for XFS (pagebuf) Reserve the 2.5 number for VM_PAGEBUF in 2.4 aswell. ChangeSet@1.1076.1.1, 2003-08-26 14:32:28-04:00, willy@debian.org [netdrvr 3c59x] ethtool_ops support ChangeSet@1.1079, 2003-08-26 15:29:58-03:00, johnstul@us.ibm.com [PATCH] Do not clear SMI pin at bootup Marcelo, All, Some of our more recent hardware requires that SMIs are routed through the IOAPIC, thus when we clear_IO_APIC() at boot time, we clear the BIOS initialized SMI pin (which is unfortunately not described in the MPS or ACPI tables). This basically clobbers the SMI, which can cause problems with console redirection as well keeping us from being able to transition into full ACPI mode. This patch (back ported from 2.5) simply reads the apic entry in clear_IO_APIC to make sure the delivery_mode isn't dest_SMI. If it is, we leave the apic entry alone and return. With this patch, booting with full ACPI works and SMIs function properly. Please consider for acceptance. thanks -john ChangeSet@1.1078, 2003-08-26 15:28:13-03:00, willy@w.ods.org [PATCH] make log buffer length selectable On Mon, Aug 25, 2003 at 04:48:30AM -0700, Marcelo Tosatti wrote: > final: > > - 2.4.22-rc4 was released as 2.4.22 with no changes. Hi Marcelo, as you requested, here is the log_buf_len patch for inclusion in 23-pre. Cheers, Willy ChangeSet@1.1077, 2003-08-26 11:52:36-03:00, hch@lst.de [PATCH] use list_add_tail in buffer_insert_list This is a really old patch from the XFS tree. We need to call list_add_tail in buffer_insert_list to preserve buffer ordering. This essential for a good extent layout with XFS's delayed allocation and a while ago the reiserfs group requested the same change. ACKed by sct. ChangeSet@1.1076, 2003-08-26 10:38:45-03:00, marcelo@logos.cnet Merge bk://kernel.bkbits.net/davem/net-2.4 into logos.cnet:/home/marcelo/bk/linux-2.4 ChangeSet@1.1075, 2003-08-26 09:51:54-03:00, arjanv@redhat.com [PATCH] Fix asm constraint bug in arch/i386/kernel/pci-pc.c Hi, Reported by HP, found by Jakub. The patch below fixes a missing asm constraint. The asm constraint of this function needs to depend on (opt) so that gcc knows that the initialisation of the opt structure needs to happen before the asm code; in the old code only the address of opt was in the constraints which isn't enough. Newer gcc will just miscompile this for p4. Greetings, Arjan van de Ven ChangeSet@1.1074, 2003-08-26 09:51:29-03:00, ak@muc.de [PATCH] Compile fix for ACPI in 2.4.22/x86-64 Marcelo unfortunately added an last minute ACPI update that changed ACPI interfaces and broke x86-64 compilation. I didn't catch it in time, so 2.4.22 does not compile out of the box for AMD64. This patch fixes it. You'll have to apply it when compiling 2.4.22 for x86-64 -Andi ChangeSet@1.1065.9.48, 2003-08-25 16:47:00-07:00, davem@nuts.ninka.net [TG3]: More fixes and enhancements. - Use ethtool_op_{get,set}_tso(). - Avoid partial byte enables on DMA writes, this upsets several non-x86 PCI controllers. ChangeSet@1.1065.9.47, 2003-08-25 16:45:11-07:00, davem@nuts.ninka.net [TG3]: Bump version/reldate. ChangeSet@1.1065.9.46, 2003-08-25 16:44:38-07:00, davem@nuts.ninka.net [TG3]: Fix tg3_phy_reset_5703_4_5 chip rev test. ChangeSet@1.1065.9.45, 2003-08-25 16:44:03-07:00, davem@nuts.ninka.net [TG3]: Bump version/reldate. ChangeSet@1.1065.9.44, 2003-08-25 16:42:24-07:00, davem@nuts.ninka.net [TG3]: Add {get,set}_tso ethtool_ops support. Also, include TSO support code when NETIF_F_TSO is available but do not enable TSO by default even on capable cards. User can turn it on via ethtool. ChangeSet@1.1065.9.43, 2003-08-25 16:40:28-07:00, davem@nuts.ninka.net [TG3]: Differentiate between TSO capable and TSO enabled. ChangeSet@1.1065.9.42, 2003-08-25 16:39:41-07:00, davem@nuts.ninka.net [TG3]: Fix 5788/5901, update TSO code. - Do not set RDMAC_MODE_FIFO_LONG_BURST on 5788 - Do not set WDMAC_MODE_RX_ACCEL on 5788 - Note that 5788 cannot use tagged irq status. - 5788 cannot do TSO - 5788 cannot do NETIF_F_HIGHDMA. - 5901 is 10/100 only. - Update TSO firmware, add 5705 specific TSO firmware. - Update TSO packet handling in ->hard_start_xmit() to match updated TSO firmware. - TSO is still off by default until more perf analysis is done. ChangeSet@1.1065.9.41, 2003-08-25 16:38:37-07:00, davem@nuts.ninka.net [TG3]: Reset PHY more reliably on 570{3,4,5} chips. ChangeSet@1.1065.9.40, 2003-08-25 16:38:00-07:00, davem@nuts.ninka.net [TG3]: More missing PCI IDs. ChangeSet@1.1065.9.39, 2003-08-25 16:34:06-07:00, davem@nuts.ninka.net [TG3]: Do not reset the RX_MAC unless PHY is Serdes. Bug discovered by Michael Chan @ Broadcom. ChangeSet@1.1065.9.38, 2003-08-25 16:33:23-07:00, davem@nuts.ninka.net [TG3]: Fix statistics on 5705. ChangeSet@1.1065.9.37, 2003-08-25 16:32:45-07:00, jgarzik@redhat.com [TG3]: Add 5782 pci id. ChangeSet@1.1065.9.36, 2003-08-25 16:31:24-07:00, jgarzik@redhat.com [TG3]: Only write the on-nic sram addr on non-5705. ChangeSet@1.1065.9.35, 2003-08-25 16:30:42-07:00, jgarzik@redhat.com [TG3]: Another 5705 fix: enable eeprom write prot as needed. ChangeSet@1.1065.9.34, 2003-08-25 16:30:06-07:00, jgarzik@redhat.com [TG3]: More 5705 fixes. - call set-wire-speed phy function from tg3_phy_reset, not just _phy_probe - disable set-wire-speed usage on certain chips, per bcm5700 driver ChangeSet@1.1065.9.33, 2003-08-25 16:29:15-07:00, jgarzik@redhat.com [TG3]: More 5705 updates. - do not zero stats/status block on 5705, they don't exist (in controller memory, at least) - define TG3_MAX_MTU macro such that it takes a (tp) pointer arg, because the value varies between 5705 and non-5705 - use the macro to simply tg3_change_mtu ChangeSet@1.1065.9.32, 2003-08-25 16:27:11-07:00, jgarzik@redhat.com [TG3]: Bug fixes for 5705 support. - (major) status block DMA address wasn't being set, for 5705. whoops. :) - (minor) pass 5705-specific RX_STD_MAX_SIZE - (minor) don't program RCVBDI_JUMBO_THRESH reg on 5705 - (very minor) re-order *THRESH, HOSTCC* regs per bcm570x driver order ChangeSet@1.1065.9.31, 2003-08-25 16:26:01-07:00, davem@nuts.ninka.net [TG3]: Initial implementation of 5705 support. ChangeSet@1.1065.9.30, 2003-08-25 16:21:53-07:00, davem@nuts.ninka.net [TG3]: Merge comment typo fixes from 2.5.x ChangeSet@1.1065.9.29, 2003-08-25 16:20:18-07:00, davem@nuts.ninka.net [TG3]: Sync TSO changes from base 2.5.x ChangeSet@1.1065.9.28, 2003-08-25 16:15:43-07:00, jgarzik@redhat.com [TG3]: Convert to using ethtool_ops. ChangeSet@1.1065.9.27, 2003-08-25 16:11:30-07:00, greg@kroah.com [TG3]: pci_device_id can not be marked __devinitdata. ChangeSet@1.1065.9.26, 2003-08-25 16:10:41-07:00, jgarzik@redhat.com [TG3]: Detect shared (and screaming) interrupts. ChangeSet@1.1065.9.25, 2003-08-25 16:10:02-07:00, davem@nuts.ninka.net [TG3]: Update to irqreturn_t. ChangeSet@1.1065.9.24, 2003-08-25 16:09:15-07:00, jmorris@intercode.com.au [TG3]: skb_headlen() cleanup. ChangeSet@1.1065.9.23, 2003-08-25 16:04:29-07:00, davem@nuts.ninka.net Merge nuts.ninka.net:/home/davem/src/BK/sparc-2.4 into nuts.ninka.net:/home/davem/src/BK/tg3-2.4 ChangeSet@1.1065.15.1, 2003-08-25 18:56:42-04:00, jgarzik@redhat.com Merge redhat.com:/garz/repo/marcelo-2.4 into redhat.com:/garz/repo/net-drivers-2.4 ChangeSet@1.1065.14.10, 2003-08-25 19:28:53-03:00, mikpe@csd.uu.se [PATCH] 2.4.22 local APIC updates 3/3: disable APIC_BASE on reboot Marcelo, This patch ensures that we properly disable the local APIC before reboot. This fixes BIOS problems reported by a few people. disable_local_APIC() now checks if detect_init_APIC() enabled the local APIC via the APIC_BASE MSR, and if so it now disables APIC_BASE. Previously we would leave APIC_BASE enabled, and that made some BIOSen malfunction. The SMP reboot code calls disable_local_APIC(). On SMP HW there is no change since detect_init_APIC() isn't called and APIC_BASE isn't enabled by us. An SMP kernel on UP HW behaves just like an UP_APIC kernel, so it disables APIC_BASE if we enabled it at boot. The UP_APIC suspend code is simplified since the existing code to disable APIC_BASE is moved into disable_local_APIC(). (Felix Kühling originally reported the BIOS reboot problem. This is a fixed-up version of his preliminary patch.) Backport from 2.6.0-test4. Tested in 2.4.22-rc. Please apply. /Mikael ChangeSet@1.1065.14.9, 2003-08-25 19:28:16-03:00, mikpe@csd.uu.se [PATCH] 2.4.22 local APIC updates 2/3: add lapic/nolapic options Marcelo, This patch adds the lapic and nolapic kernel options, which give users greater control of the local APIC enable process on x86: - "nolapic" prevents the kernel from enabling or using the local APIC. This is stronger than listing a machine in the DMI scan blacklist, since it also works for machines that boot with the local APIC already enabled. "nolapic" can also be seen as a simple-to-deploy alternative to keeping the DMI blacklist rules up-to-date. - "lapic" tells the kernel to force-enable the P4 local APIC if the BIOS disabled it. This is needed on some machines. The default (don't enable if BIOS didn't) can't be changed since there is an even larger number of P4s where ACPI breaks if the local APIC is enabled. Backport from 2.6.0-test4. Tested in 2.4.22-rc. Please apply. This patch renames the dont_enable_local_apic variable, so if you apply it you also need to apply "local APIC updates 1/3: remove incorrect blacklist rules". /Mikael ChangeSet@1.1065.14.8, 2003-08-25 19:26:55-03:00, mikpe@csd.uu.se [PATCH] 2.4.22 local APIC updates 1/3: remove incorrect blacklist rules Marcelo, This patch removes the x86 local APIC blacklist rules for the Microstar 6163 and Intel AL440LX mainboards, as these boards _do_ work with local APIC enabled. The AL440LX blacklist rule was the only place where the dont_enable_local_apic_timer flag could be set, so the patch removes that variable and the code which checks it. The hangs these boards used to have has since been traced to a combination of using specific graphics cards with APM's DISPLAY_BLANK option. Backport from 2.5.72. Also tested in 2.4 for months. Please apply. /Mikael ChangeSet@1.1071, 2003-08-25 18:26:15-04:00, jgarzik@redhat.com Merge redhat.com:/garz/repo/marcelo-2.4 into redhat.com:/garz/repo/hwrandom-2.4 ChangeSet@1.1065.14.7, 2003-08-25 19:21:59-03:00, m.c.p@wolk-project.de [PATCH] Proper APIC with HyperThreading Hi Marcelo, the boot issue with DL760 G2 issue with Hyper-Threading (16-way logical) was root-caused to be coming from hardcoding of apic-version during the acpi boot-up code. The attached patch fixes the issue, by reading in the actual apic version. This apic-version is used later in the boot process, to identify whether the processor supports xAPIC or not. And that in turn was resulting in boot failure. Refer following lkml threads for detailed the problem description: Subject: SUMMARY: DL760 G2 issue with Hyper-Threading: Subject: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading In -ac and -wolk for some time. Patch by "Venkatesh Pallipadi" ChangeSet@1.1065.14.6, 2003-08-25 19:18:30-03:00, m.c.p@wolk-project.de [PATCH] Avoid potentially leaking pagetables into the per-cpu queues Hi Marcelo, $subject says it all. Patch from Andrea Arcangeli! It's in -aa since 2.4.17rc2aa1, in -wolk for some time. ChangeSet@1.1065.14.5, 2003-08-25 19:11:07-03:00, marcelo@logos.cnet Cset exclude: m.c.p@wolk-project.de|ChangeSet|20030825194257|34486 ChangeSet@1.1065.9.22, 2003-08-25 14:51:42-07:00, davem@nuts.ninka.net [NET]: Include asm/uaccess.h in net/core/ethtool.c ChangeSet@1.1070, 2003-08-25 17:38:58-04:00, jgarzik@redhat.com Merge redhat.com:/garz/repo/marcelo-2.4 into redhat.com:/garz/repo/hwrandom-2.4 ChangeSet@1.1069, 2003-08-25 17:37:39-04:00, jgarzik@redhat.com [ia32] mention that X86_VENDOR_ID is tied to NCAPINTS, in a comment in arch/i386/kernel/head.S. ChangeSet@1.1065.14.4, 2003-08-25 18:24:46-03:00, m.c.p@wolk-project.de [PATCH] CONFIG_NR_CPUS Hi Marcelo, this patch has been around for ages. 2.6 has the same change/cleanup. Now, w/o the patch, the kernel will be compiled with 32 CPUs, allthough you might only have 2 or 4 or so. This is purely to save memory - each supported CPU adds approximately eight kilobytes to the kernel image. ChangeSet@1.1065.9.21, 2003-08-25 14:24:34-07:00, jgarzik@redhat.com [NET]: Backport ethtool_ops from 2.6.x ChangeSet@1.1065.14.3, 2003-08-25 18:18:51-03:00, m.c.p@wolk-project.de [PATCH] LVM Update v1.0.5 to v1.0.7 On Thursday 31 July 2003 03:04, Marcelo Tosatti wrote: Hi Marcelo, > > would you consider updating LVM from 1.05 to 1.07 in -pre10? It's out > > there for many months now, many vendor tree's are using it, my tree uses > > it and prolly many others and I am not aware of any problems. > > Should I send a patch? Please let me know. > It depends on the type of changes. I prefer including it in -pre10 only if > its obvioux bugfixes only. > Please send me it together with a detailed changelog. ok, here we go, 5 small but important bugfixes: Changes from v1.0.5 -> v1.0.7 ----------------------------- o fixed lvrename bug leaving wrong filesystem entries around in /proc/lvm/ o fixed lvextend/lvreduce bug on snapshots preventing correct reload of the excpetion table possibly giving wrong snapshot content. o fixed snapshot extend/reduce memory leak o fixed wrong VG PE counter o some whitespace cleanup ChangeSet@1.1065.14.1, 2003-08-25 18:06:46-03:00, m.c.p@wolk-project.de [PATCH] Handle get_block errors correctly in block_read_full_page() Hi Marcelo, quoting Andrea: > Anton found get_block errors weren't handled correctly by > block_read_full_page(). This is my proposed fix for the problem, > implementation and patching is from Anton Altaparmakov. It's in -aa and -wolk for some time. Please apply for 2.4.23-pre1. Thank you :) ChangeSet@1.1065.9.20, 2003-08-25 14:00:11-07:00, davem@nuts.ninka.net [TG3]: Fix AC1001 typo in pci_ids.h ChangeSet@1.1065.13.1, 2003-08-25 13:41:49-07:00, davem@nuts.ninka.net Merge nuts.ninka.net:/home/davem/src/BK/sparcwork-2.4 into nuts.ninka.net:/home/davem/src/BK/sparc-2.4 ChangeSet@1.1065.9.19, 2003-08-25 13:38:25-07:00, davem@nuts.ninka.net Merge nuts.ninka.net:/home/davem/src/BK/network-2.4 into nuts.ninka.net:/home/davem/src/BK/net-2.4 ChangeSet@1.1065.11.2, 2003-08-25 13:29:23-07:00, trini@kernel.crashing.org PPC32: Fix KGDB and userland GDB interactions. ChangeSet@1.1065.9.18, 2003-08-25 16:44:39-03:00, m.c.p@wolk-project.de [PATCH] Unblank console if panic() Hi Marcelo, if a kernel panic()'s, and a console blank timer is running, it is possible that the screen goes blank and he/she isn't able to read the panic. Bad. The attached patch disables the console blank timer when panic(). Patch from Daniel Phillips! It's in -wolk for a long time. NOTE: You have to apply "2.4-panic-console-switch-1.patch" first, otherwise this will fail with 1 hunk. ChangeSet@1.1065.9.17, 2003-08-25 16:42:57-03:00, m.c.p@wolk-project.de [PATCH] Allow sysrq() via /proc/sys/kernel/magickey Hi Marcelo, sysrq() is a good thing to debug things, but unfortunately you need to have physical access to the keyboard. My company for instance maintains tons of remote machines and sometimes we need to do sysrq() too, but it's not possible to do so the remote way. Attached patch enables emulation of the Magic SysRq key (Alt-SysRq-key) via the /proc interface. Just echo the desired character into the file and there you go. Patch from Randy Dunlap! It's in -wolk for a long time and also in some other kernel tree forks. 2.5/2.6 has almost the same (/proc/sysrq-trigger) ChangeSet@1.1065.9.16, 2003-08-25 16:30:09-03:00, acme@conectiva.com.br [PATCH] irqreturn_t compatibility with 2.6 Hi Marcelo, As I described to you in another message this patch is needed so that drivers don't have to be adding private copies of irqreturn_t and friends, like ATM, aic7xxx already do in 2.4.22-pre10, please apply. It is still against 2.4.22-pre10, but I think it'll apply cleanly, holler if not. - Arnaldo ChangeSet@1.1065.9.15, 2003-08-25 16:25:44-03:00, m.c.p@wolk-project.de [PATCH] Allow console switching after kernel panic() Hi Marcelo, if a kernel panic()'s, there's no chance to switch to another console for maybe important informations either about the panic or some important email the user was writing or such stuff. Attached patch allows _only_ console switching if a panic occured. Patch from Andi Kleen! It's in -wolk for a long time. ChangeSet@1.1065.9.14, 2003-08-25 15:37:31-03:00, marcelo@logos.cnet Cset exclude: m.c.p@wolk-project.de|ChangeSet|20030825183254|28555 ChangeSet@1.1065.9.13, 2003-08-25 15:32:54-03:00, m.c.p@wolk-project.de [PATCH] disable READA is an SMP only thing. Make it so. [ The following text is in the "iso-8859-15" character set. ] [ Your display is set for the "ISO-8859-1" character set. ] [ Some characters may be displayed incorrectly. ] Hi Marcelo, $subject says it all. It's in -aa, -wolk for a long time. Reference: http://lists.insecure.org/lists/linux-kernel/2002/Jul/6615.html ChangeSet@1.1065.10.4, 2003-08-25 13:19:37-05:00, shaggy@shaggy.austin.ibm.com JFS: add nointegrity mount option (Karl Rister) This option allows a performance boost by not writing to the journal at the expense of loss of data integrity if the system crashes or is powered off. The intended use of this option is to allow faster restores from backup media. ChangeSet@1.1065.9.12, 2003-08-25 15:15:54-03:00, m.c.p@wolk-project.de [PATCH] Replace bogus and obsolete "#if __SMP__" -> CONFIG_SMP Hi Marcelo, there are some places in the current kernel where __SMP__ appears. This is from old 2.2 times and is never ever defined nor used in current 2.4. Attached patch replaces __SMP__ with CONFIG_SMP. It also cleanes up 3 bogus #ifdef __SMP__ in fs/jbd code which is never used and not needed. Patch from Andrea Arcangeli! It's in -aa since 2.4.21-aa1, in -wolk for some time. Same cleanup was made to 2.5.x. Please apply for 2.4.23-pre1. Thank you :) With this applied, _all_ bogus __SMP__ defines are gone from 2.4. This patch is absolutely safe and just a cleanup! ChangeSet@1.1065.11.1, 2003-08-25 11:12:16-07:00, trini@kernel.crashing.org PPC32: Change the default behavior of a kernel with KGDB. We now don't default to an initial breakpoint, as this is how KGDB on i386 works. ChangeSet@1.1065.9.11, 2003-08-25 15:11:30-03:00, m.c.p@wolk-project.de [PATCH] Cleanup DRM submenu Hi Marcelo, attached patch cleans up the DRM submenu. ChangeSet@1.1065.9.10, 2003-08-25 15:04:58-03:00, m.c.p@wolk-project.de [PATCH] Fix initrd with netboot From "Martin Persson" we've encountered a problem when trying to netboot 2.4.21 and above. After /linuxrc has been executed and the kernel tries to remount the root, it panics with the all too well known message "Unable to mount root fs on ...". The kernel bugs out in mount_block_root in the file init/do_mounts.c, to be more precise in the for-loop. What happens is that it tries to mount the file system as type ext2 (which happens to be first in the list in our case), but instead of returning -EINVAL it returns -EBUSY, the loop exits instead of trying the next (correct) fs-type and the kernel panics. In -wolk for some time and maybe others. ChangeSet@1.1065.9.9, 2003-08-25 15:03:11-03:00, m.c.p@wolk-project.de [PATCH] Cleanup kmem_cache_reap() From "fbl@netbank.com.br" # This patch includes the following deltas: # ChangeSet 1.1193 -> 1.1194 # mm/slab.c 1.22 -> 1.23 # # The following is the BitKeeper ChangeSet Log # -------------------------------------------- # 03/06/03 fbl@netbank.com.br 1.1194 # [PATCH] Cleanup kmem_cache_reap() # # There is no need to keep the list_entry() # out of DEBUG condition. # -------------------------------------------- In 2.5 and -wolk for some time. # This is a BitKeeper generated patch for the following project: # Project Name: Linux kernel tree # This patch format is intended for GNU patch command version 2.5 or higher. # This patch includes the following deltas: # ChangeSet 1.1193 -> 1.1194 # mm/slab.c 1.22 -> 1.23 # # The following is the BitKeeper ChangeSet Log # -------------------------------------------- # 03/06/03 fbl@netbank.com.br 1.1194 # [PATCH] Cleanup kmem_cache_reap() # # There is no need to keep the list_entry() # out of DEBUG condition. # -------------------------------------------- # ChangeSet@1.1065.9.8, 2003-08-25 14:46:28-03:00, hch@lst.de [PATCH] fix copy_namespace() Originally by aeb, in 2.5 for ages. Fix far too small kmalloc in copy_namespace and promote errors properly. ChangeSet@1.1065.9.7, 2003-08-25 14:37:52-03:00, Jack_Hammer@adaptec.com [PATCH] ServeRAID 6.10 Driver Update With the completion of months of testing at both Adaptec and IBM, the newest version of the ServeRAID Linux device driver( ips Version 6.10.24 ) iscompleted and ready to ship. Attached is the full source ( ips.c & ips.h )and patches for the 2.4 Linux kernel. Both 32-bit andia64 architectures are supported. Please update all 2.4.x kernels with this latest driver as soon as possible. Updates for the 2.5 kernel are being handled separately. Let me know if you have any problems. Jack Hammer ChangeSet@1.1065.9.6, 2003-08-25 14:21:29-03:00, marcelo@logos.cnet pcwd.c: fix oops on unload From Arkadiusz Miskiewicz This patch is from Alan Cox and fixes problems when pcwd driver is loaded while there is no pcwd hardware installed. No idea why it was not feeded to you. Problem is described here http://www.ussg.iu.edu/hypermail/linux/kernel/0308.1/0178.html and tracked down in private conversation with Cox. ChangeSet@1.1065.9.5, 2003-08-25 14:16:14-03:00, mmagallo@debian.org [PATCH] AGPGART support for Intel 7x05 chipsets (backported from 2.6) Hi Marcelo, can you please apply the attached patch before releasing 2.4.22? It adds AGPGART support for Intel's 7205 and 7505 chipsets, which are becoming increasingly common on the street. I have checked on several machines that the patch works, even with AGP 8x. The only hardware I have access to is from NVIDIA, which means I haven't been able to test this with a non-tainted kernel, but I don't expect this to be a problem. ChangeSet@1.1065.9.4, 2003-08-25 13:58:04-03:00, willy@w.ods.org [PATCH] Fix amd67x_pm.c crash with no chipsets / CONFIG_HOTPLUG amd76x_pm.c will crash if no chipsets are found and CONFIG_HOTPLUG is turned on. This patch makes it return with a failure instead. ChangeSet@1.1065.9.3, 2003-08-25 13:57:10-03:00, marcelo@logos.cnet Changed Makefile to 2.4.22 TAG: v2.4.22