#! /bin/sh # # This script is used to configure the linux kernel. # # It was inspired by a desire to not have to hit 9 million times # or startup the X server just to change a single kernel parameter. # # This script attempts to parse the configuration files, which are # scattered throughout the kernel source tree, and creates a temporary # set of mini scripts which are in turn used to create nested menus and # radiolists. # # It uses a very modified/mutilated version of the "dialog" utility # written by Savio Lam (lam836@cs.cuhk.hk). Savio is not responsible # for this script or the version of dialog used by this script. # Please do not contact him with questions. The official version of # dialog is available at sunsite.unc.edu or a sunsite mirror. # # Portions of this script were borrowed from the original Configure # script. # # William Roadcap was the original author of Menuconfig. # Michael Elizabeth Chastain (mec@shout.net) is the current maintainer. # # 070497 Bernhard Kaindl (bkaindl@netway.at) - get default values for # new bool, tristate and dep_tristate parameters from the defconfig file. # new configuration parameters are marked with '(NEW)' as in make config. # # 180697 Bernhard Kaindl (bkaindl@netway.at) - added the needed support # for string options. They are handled like the int and hex options. # # 081297 Pavel Machek (pavel@atrey.karlin.mff.cuni.cz) - better error # handling # # 131197 Michael Chastain (mec@shout.net) - output all lines for a # choice list, not just the selected one. This makes the output # the same as Configure output, which is important for smart config # dependencies. # # 101297 Michael Chastain (mec@shout.net) - remove sound driver cruft. # # 221297 Michael Chastain (mec@shout.net) - make define_bool actually # define its arguments so that later tests on them work right. # # 160198 Michael Chastain (mec@shout.net) - fix bug with 'c' command # (complement existing value) when used on virgin uninitialized variables. # # 090398 Axel Boldt (boldt@math.ucsb.edu) - allow for empty lines in help # texts. # # 12 Dec 1998, Michael Elizabeth Chastain (mec@shout.net) # Remove a /tmp security hole in get_def (also makes it faster). # Give uninitialized variables canonical values rather than null value. # Change a lot of places to call set_x_info uniformly. # Take out message about preparing version (old sound driver cruft). # # 13 Dec 1998, Riley H Williams # When an error occurs, actually display the error message as well as # our comments thereon. # # 31 Dec 1998, Michael Elizabeth Chastain (mec@shout.net) # Fix mod_bool to honor $CONFIG_MODULES. # Fix dep_tristate to call define_bool when dependency is "n". # # 02 January 1999, Michael Elizabeth Chastain (mec@shout.net) # Blow away lxdialog.scrltmp on entry to activate_menu. This protects # against people who use commands like ' ' to select menus. # # 24 January 1999, Michael Elizabeth Chastain, # - Improve the exit message (Jeff Ronne). # # 06 July 1999, Andrzej M. Krzysztofowicz, # - Support for multiple conditions in dep_tristate(). # - Implemented new functions: define_tristate(), define_int(), define_hex(), # define_string(), dep_bool(). # # # Change this to TRUE if you prefer all kernel options listed # in a single menu rather than the standard menu hierarchy. # single_menu_mode= # # Make sure we're really running bash. # [ -z "$BASH" ] && { echo "Menuconfig requires bash" 1>&2; exit 1; } # # Cache function definitions, turn off posix compliance # set -h +o posix # Given a configuration variable, set the global variable $x to its value, # and the global variable $info to the string " (NEW)" if this is a new # variable. # # This function looks for: (1) the current value, or (2) the default value # from the arch-dependent defconfig file, or (3) a default passed by the caller. function set_x_info () { eval x=\$$1 if [ -z "$x" ]; then eval `sed -n -e 's/# \(.*\) is not set.*/\1=n/' -e "/^$1=/p" arch/$ARCH/defconfig` eval x=\${$1:-"$2"} eval $1=$x eval INFO_$1="' (NEW)'" fi eval info="\$INFO_$1" } # # Load the functions used by the config.in files. # # I do this because these functions must be redefined depending # on whether they are being called for interactive use or for # saving a configuration to a file. # # Thank the heavens bash supports nesting function definitions. # load_functions () { # # Additional comments # function comment () { comment_ctr=$[ comment_ctr + 1 ] echo -ne "': $comment_ctr' '--- $1' " >>MCmenu } # # Define a boolean to a specific value. # function define_bool () { eval $1=$2 } function define_tristate () { eval $1=$2 } function define_hex () { eval $1=$2 } function define_int () { eval $1=$2 } function define_string () { eval $1="$2" } # # Create a boolean (Yes/No) function for our current menu # which calls our local bool function. # function bool () { set_x_info "$2" "n" case $x in y|m) flag="*" ;; n) flag=" " ;; esac echo -ne "'$2' '[$flag] $1$info' " >>MCmenu echo -e "function $2 () { l_bool '$2' \"\$1\" ;}\n" >>MCradiolists } # # Create a tristate (Yes/No/Module) radiolist function # which calls our local tristate function. # # Collapses to a boolean (Yes/No) if module support is disabled. # function tristate () { if [ "$CONFIG_MODULES" != "y" ] then bool "$1" "$2" else set_x_info "$2" "n" case $x in y) flag="*" ;; m) flag="M" ;; *) flag=" " ;; esac echo -ne "'$2' '<$flag> $1$info' " >>MCmenu echo -e " function $2 () { l_tristate '$2' \"\$1\" ;}" >>MCradiolists fi } # # Create a tristate radiolist function which is dependent on # another kernel configuration option. # # Quote from the original configure script: # # If the option we depend upon is a module, # then the only allowable options are M or N. If Y, then # this is a normal tristate. This is used in cases where modules # are nested, and one module requires the presence of something # else in the kernel. # function dep_tristate () { ques="$1" var="$2" dep=y shift 2 while [ $# -gt 0 ]; do if [ "$1" = y ]; then shift elif [ "$1" = m ]; then dep=m shift else dep=n shift $# fi done if [ "$dep" = y ]; then tristate "$ques" "$var" elif [ "$dep" = m ]; then mod_bool "$ques" "$var" else define_tristate "$var" n fi } # # Same as above, but now only Y and N are allowed as dependency # (i.e. third and next arguments). # function dep_bool () { ques="$1" var="$2" dep=y shift 2 while [ $# -gt 0 ]; do if [ "$1" = y ]; then shift else dep=n shift $# fi done if [ "$dep" = y ]; then bool "$ques" "$var" else define_bool "$var" n fi } function dep_mbool () { ques="$1" var="$2" dep=y shift 2 while [ $# -gt 0 ]; do if [ "$1" = y -o "$1" = m ]; then shift else dep=n shift $# fi done if [ "$dep" = y ]; then bool "$ques" "$var" else define_bool "$var" n fi } # # Add a menu item which will call our local int function. # function int () { set_x_info "$2" "$3" echo -ne "'$2' '($x) $1$info' " >>MCmenu echo -e "function $2 () { l_int '$1' '$2' '$3' '$x' ;}" >>MCradiolists } # # Add a menu item which will call our local hex function. # function hex () { set_x_info "$2" "$3" x=${x##*[x,X]} echo -ne "'$2' '($x) $1$info' " >>MCmenu echo -e "function $2 () { l_hex '$1' '$2' '$3' '$x' ;}" >>MCradiolists } # # Add a menu item which will call our local string function. # function string () { set_x_info "$2" "$3" echo -ne "'$2' ' $1: \"$x\"$info' " >>MCmenu echo -e "function $2 () { l_string '$1' '$2' '$3' '$x' ;}" >>MCradiolists } # # Add a menu item which will call our local One-of-Many choice list. # function choice () { # # Need to remember params cause they're gonna get reset. # title=$1 choices=$2 default=$3 current= # # Find out if one of the choices is already set. # If it's not then make it the default. # set -- $choices firstchoice=$2 while [ -n "$2" ] do if eval [ "_\$$2" = "_y" ] then current=$1 break fi shift ; shift done : ${current:=$default} echo -ne "'$firstchoice' '($current) $title' " >>MCmenu echo -e " function $firstchoice () \ { l_choice '$title' \"$choices\" \"$current\" ;}" >>MCradiolists } } # END load_functions() # # Extract available help for an option from Configure.help # and send it to standard output. # # Most of this function was borrowed from the original kernel # Configure script. # function extract_help () { if [ -f Documentation/Configure.help ] then #first escape regexp special characters in the argument: var=$(echo "$1"|sed 's/[][\/.^$*]/\\&/g') #now pick out the right help text: text=$(sed -n "/^$var[ ]*\$/,\${ /^$var[ ]*\$/c\\ ${var}:\\ /^#/b /^[^ ]/q s/^ // /]*\\)>/s//\\1/g p }" Documentation/Configure.help) if [ -z "$text" ] then echo "There is no help available for this kernel option." return 1 else echo "$text" fi else echo "There is no help available for this kernel option." return 1 fi } # # Activate a help dialog. # function help () { if extract_help $1 >help.out then $DIALOG --backtitle "$backtitle" --title "$2"\ --textbox help.out $ROWS $COLS else $DIALOG --backtitle "$backtitle" \ --textbox help.out $ROWS $COLS fi rm -f help.out } # # Show the README file. # function show_readme () { $DIALOG --backtitle "$backtitle" \ --textbox scripts/README.Menuconfig $ROWS $COLS } # # Begin building the dialog menu command and Initialize the # Radiolist function file. # function menu_name () { echo -ne "$DIALOG --title '$1'\ --backtitle '$backtitle' \ --menu '$menu_instructions' \ $ROWS $COLS $((ROWS-10)) \ '$default' " >MCmenu >MCradiolists } # # Add a submenu option to the menu currently under construction. # function submenu () { echo -ne "'activate_menu $2' '$1 --->' " >>MCmenu } # # Handle a boolean (Yes/No) option. # function l_bool () { if [ -n "$2" ] then case "$2" in y|m) eval $1=y ;; c) eval x=\$$1 case $x in y) eval $1=n ;; n) eval $1=y ;; *) eval $1=y ;; esac ;; *) eval $1=n ;; esac else echo -ne "\007" fi } # # Same as bool() except options are (Module/No) # function mod_bool () { if [ "$CONFIG_MODULES" != "y" ]; then define_bool "$2" "n" else set_x_info "$2" "n" case $x in y|m) flag='M' ;; *) flag=' ' ;; esac echo -ne "'$2' '<$flag> $1$info' " >>MCmenu echo -e "function $2 () { l_mod_bool '$2' \"\$1\" ;}" >>MCradiolists fi } # # Same as l_bool() except options are (Module/No) # function l_mod_bool() { if [ -n "$2" ] then case "$2" in y) echo -en "\007" ${DIALOG} --backtitle "$backtitle" \ --infobox "\ This feature depends on another which has been configured as a module. \ As a result, this feature will be built as a module." 4 70 sleep 5 eval $1=m ;; m) eval $1=m ;; c) eval x=\$$1 case $x in m) eval $1=n ;; n) eval $1=m ;; *) eval $1=m ;; esac ;; *) eval $1=n ;; esac else echo -ne "\007" fi } # # Handle a tristate (Yes/No/Module) option. # function l_tristate () { if [ -n "$2" ] then eval x=\$$1 case "$2" in y) eval $1=y ;; m) eval $1=m ;; c) eval x=\$$1 case $x in y) eval $1=n ;; n) eval $1=m ;; m) eval $1=y ;; *) eval $1=y ;; esac ;; *) eval $1=n ;; esac else echo -ne "\007" fi } # # Create a dialog for entering an integer into a kernel option. # function l_int () { while true do if $DIALOG --title "$1" \ --backtitle "$backtitle" \ --inputbox "$inputbox_instructions_int" \ 10 75 "$4" 2>MCdialog.out then answer="`cat MCdialog.out`" answer="${answer:-$3}" # Semantics of + and ? in GNU expr changed, so # we avoid them: if expr "$answer" : '0$' '|' "$answer" : '[1-9][0-9]*$' '|' "$answer" : '-[1-9][0-9]*$' >/dev/null then eval $2="$answer" else eval $2="$3" echo -en "\007" ${DIALOG} --backtitle "$backtitle" \ --infobox "You have made an invalid entry." 3 43 sleep 2 fi break fi help "$2" "$1" done } # # Create a dialog for entering a hexadecimal into a kernel option. # function l_hex () { while true do if $DIALOG --title "$1" \ --backtitle "$backtitle" \ --inputbox "$inputbox_instructions_hex" \ 10 75 "$4" 2>MCdialog.out then answer="`cat MCdialog.out`" answer="${answer:-$3}" answer="${answer##*[x,X]}" if expr "$answer" : '[0-9a-fA-F][0-9a-fA-F]*$' >/dev/null then eval $2="$answer" else eval $2="$3" echo -en "\007" ${DIALOG} --backtitle "$backtitle" \ --infobox "You have made an invalid entry." 3 43 sleep 2 fi break fi help "$2" "$1" done } # # Create a dialog for entering a string into a kernel option. # function l_string () { while true do if $DIALOG --title "$1" \ --backtitle "$backtitle" \ --inputbox "$inputbox_instructions_string" \ 10 75 "$4" 2>MCdialog.out then answer="`cat MCdialog.out`" answer="${answer:-$3}" # # Someone may add a nice check for the entered # string here... # eval $2=\"$answer\" break fi help "$2" "$1" done } # # Handle a one-of-many choice list. # function l_choice () { # # Need to remember params cause they're gonna get reset. # title="$1" choices="$2" current="$3" chosen= # # Scan current value of choices and set radiolist switches. # list= set -- $choices firstchoice=$2 while [ -n "$2" ] do case "$1" in "$current"*) if [ -z "$chosen" ]; then list="$list $2 $1 ON " chosen=1 else list="$list $2 $1 OFF " fi ;; *) list="$list $2 $1 OFF " ;; esac shift ; shift done while true do if $DIALOG --title "$title" \ --backtitle "$backtitle" \ --radiolist "$radiolist_instructions" \ 15 70 6 $list 2>MCdialog.out then choice=`cat MCdialog.out` break fi help "$firstchoice" "$title" done # # Now set the boolean value of each option based on # the selection made from the radiolist. # set -- $choices while [ -n "$2" ] do if [ "$2" = "$choice" ] then eval $2="y" else eval $2="n" fi shift ; shift done } # # Call awk, and watch for error codes, etc. # function callawk () { awk "$1" || { echo "Awk died with error code $?. Giving up."; exit 1; } } # # A faster awk based recursive parser. (I hope) # function parser1 () { callawk ' BEGIN { menu_no = 0 comment_is_option = 0 parser("'$CONFIG_IN'","MCmenu0") } function parser(ifile,menu) { while (getline >menu newmenu = sprintf("MCmenu%d", menu_no); printf( "function MCmenu%s () {\n"\ "default=$1\n"\ "menu_name %s\n",\ menu_no, $0) >newmenu parser(ifile, newmenu) } else if ($0 ~ /^#|\$MAKE|mainmenu_name/) { printf("") >>menu } else if ($1 ~ "endmenu") { printf("}\n") >>menu return } else if ($1 == "source") { parser($2,menu) } else { print >>menu } } }' } # # Secondary parser for single menu mode. # function parser2 () { callawk ' BEGIN { parser("'$CONFIG_IN'","MCmenu0") } function parser(ifile,menu) { while (getline >menu } else if ($1 ~ /mainmenu_option|endmenu/) { printf("") >>menu } else if ($1 == "source") { parser($2,menu) } else { print >>menu } } }' } # # Parse all the config.in files into mini scripts. # function parse_config_files () { rm -f MCmenu* echo "function MCmenu0 () {" >MCmenu0 echo 'default=$1' >>MCmenu0 echo "menu_name 'Main Menu'" >>MCmenu0 if [ "_$single_menu_mode" = "_TRUE" ] then parser2 else parser1 fi echo "comment ''" >>MCmenu0 echo "g_alt_config" >>MCmenu0 echo "s_alt_config" >>MCmenu0 echo "}" >>MCmenu0 # # These mini scripts must be sourced into the current # environment in order for all of this to work. Leaving # them on the disk as executables screws up the recursion # in activate_menu(), among other things. Once they are # sourced we can discard them. # for i in MCmenu* do echo -n "." source ./$i done rm -f MCmenu* } # # This is the menu tree's bootstrap. # # Executes the parsed menus on demand and creates a set of functions, # one per configuration option. These functions will in turn execute # dialog commands or recursively call other menus. # function activate_menu () { rm -f lxdialog.scrltmp while true do comment_ctr=0 #So comment lines get unique tags $1 "$default" 2> MCerror #Create the lxdialog menu & functions if [ "$?" != "0" ] then clear cat < /' MCerror cat <. You may also send a problem report to . Please indicate the kernel version you are trying to configure and which menu you were trying to enter when this error occurred. EOM cleanup exit 1 fi rm -f MCerror . ./MCradiolists #Source the menu's functions . ./MCmenu 2>MCdialog.out #Activate the lxdialog menu ret=$? read selection "*|*"alt_config"*) show_readme ;; *) eval help $selection ;; esac ;; 255|1) break ;; 139) stty sane clear cat < or post a message to for additional assistance. EOM cleanup exit 139 ;; esac done } # # Create a menu item to load an alternate configuration file. # g_alt_config () { echo -n "get_alt_config 'Load an Alternate Configuration File' "\ >>MCmenu } # # Get alternate config file name and load the # configuration from it. # get_alt_config () { set -f ## Switch file expansion OFF while true do ALT_CONFIG="${ALT_CONFIG:-$DEFAULTS}" $DIALOG --backtitle "$backtitle" \ --inputbox "\ Enter the name of the configuration file you wish to load. \ Accept the name shown to restore the configuration you \ last retrieved. Leave blank to abort."\ 11 55 "$ALT_CONFIG" 2>MCdialog.out if [ "$?" = "0" ] then ALT_CONFIG=`cat MCdialog.out` [ "_" = "_$ALT_CONFIG" ] && break if eval [ -r "$ALT_CONFIG" ] then eval load_config_file "$ALT_CONFIG" break else echo -ne "\007" $DIALOG --backtitle "$backtitle" \ --infobox "File does not exist!" 3 38 sleep 2 fi else cat <help.out For various reasons, one may wish to keep several different kernel configurations available on a single machine. If you have saved a previous configuration in a file other than the kernel's default, entering the name of the file here will allow you to modify that configuration. If you are uncertain, then you have probably never used alternate configuration files. You should therefor leave this blank to abort. EOM $DIALOG --backtitle "$backtitle"\ --title "Load Alternate Configuration"\ --textbox help.out $ROWS $COLS fi done set +f ## Switch file expansion ON rm -f help.out MCdialog.out } # # Create a menu item to store an alternate config file. # s_alt_config () { echo -n "save_alt_config 'Save Configuration to an Alternate File' "\ >>MCmenu } # # Get an alternate config file name and save the current # configuration to it. # save_alt_config () { set -f ## Switch file expansion OFF while true do $DIALOG --backtitle "$backtitle" \ --inputbox "\ Enter a filename to which this configuration should be saved \ as an alternate. Leave blank to abort."\ 10 55 "$ALT_CONFIG" 2>MCdialog.out if [ "$?" = "0" ] then ALT_CONFIG=`cat MCdialog.out` [ "_" = "_$ALT_CONFIG" ] && break if eval touch $ALT_CONFIG 2>/dev/null then eval save_configuration $ALT_CONFIG load_functions ## RELOAD break else echo -ne "\007" $DIALOG --backtitle "$backtitle" \ --infobox "Can't create file! Probably a nonexistent directory." 3 60 sleep 2 fi else cat <help.out For various reasons, one may wish to keep different kernel configurations available on a single machine. Entering a file name here will allow you to later retrieve, modify and use the current configuration as an alternate to whatever configuration options you have selected at that time. If you are uncertain what all this means then you should probably leave this blank. EOM $DIALOG --backtitle "$backtitle"\ --title "Save Alternate Configuration"\ --textbox help.out $ROWS $COLS fi done set +f ## Switch file expansion ON rm -f help.out MCdialog.out } # # Load config options from a file. # Converts all "# OPTION is not set" lines to "OPTION=n" lines # function load_config_file () { awk ' /# .* is not set.*/ { printf("%s=n\n", $2) } ! /# .* is not set.*/ { print } ' $1 >.tmpconfig source ./.tmpconfig rm -f .tmpconfig } # # Just what it says. # save_configuration () { echo echo -n "Saving your kernel configuration." # # Now, let's redefine the configuration functions for final # output to the config files. # # Nested function definitions, YIPEE! # function bool () { set_x_info "$2" "n" eval define_bool "$2" "$x" } function tristate () { set_x_info "$2" "n" eval define_tristate "$2" "$x" } function dep_tristate () { set_x_info "$2" "n" var="$2" shift 2 while [ $# -gt 0 ]; do if [ "$1" = y ]; then shift elif [ "$1" = m -a "$x" != n ]; then x=m; shift else x=n; shift $# fi done define_tristate "$var" "$x" } function dep_bool () { set_x_info "$2" "n" var="$2" shift 2 while [ $# -gt 0 ]; do if [ "$1" = y ]; then shift else x=n; shift $# fi done define_bool "$var" "$x" } function dep_mbool () { set_x_info "$2" "n" var="$2" shift 2 while [ $# -gt 0 ]; do if [ "$1" = y -o "$1" = m ]; then shift else x=n; shift $# fi done define_bool "$var" "$x" } function int () { set_x_info "$2" "$3" echo "$2=$x" >>$CONFIG echo "#define $2 ($x)" >>$CONFIG_H } function hex () { set_x_info "$2" "$3" echo "$2=$x" >>$CONFIG echo "#define $2 0x${x##*[x,X]}" >>$CONFIG_H } function string () { set_x_info "$2" "$3" echo "$2=\"$x\"" >>$CONFIG echo "#define $2 \"$x\"" >>$CONFIG_H } function define_hex () { eval $1="$2" echo "$1=$2" >>$CONFIG echo "#define $1 0x${2##*[x,X]}" >>$CONFIG_H } function define_int () { eval $1="$2" echo "$1=$2" >>$CONFIG echo "#define $1 ($2)" >>$CONFIG_H } function define_string () { eval $1="$2" echo "$1=\"$2\"" >>$CONFIG echo "#define $1 \"$2\"" >>$CONFIG_H } function define_bool () { define_tristate "$1" "$2" } function define_tristate () { eval $1="$2" case "$2" in y) echo "$1=y" >>$CONFIG echo "#define $1 1" >>$CONFIG_H ;; m) if [ "$CONFIG_MODULES" = "y" ] then echo "$1=m" >>$CONFIG echo "#undef $1" >>$CONFIG_H echo "#define $1_MODULE 1" >>$CONFIG_H else echo "$1=y" >>$CONFIG echo "#define $1 1" >>$CONFIG_H fi ;; n) echo "# $1 is not set" >>$CONFIG echo "#undef $1" >>$CONFIG_H ;; esac } function choice () { # # Find the first choice that's already set to 'y' # choices="$2" default="$3" current= chosen= set -- $choices while [ -n "$2" ] do if eval [ "_\$$2" = "_y" ] then current=$1 break fi shift ; shift done # # Use the default if none were set. # : ${current:=$default} # # Output all choices (to be compatible with other configs). # set -- $choices while [ -n "$2" ] do case "$1" in "$current"*) if [ -z "$chosen" ]; then define_bool "$2" "y" chosen=1 else define_bool "$2" "n" fi ;; *) define_bool "$2" "n" ;; esac shift ; shift done } function mainmenu_name () { : } function mainmenu_option () { comment_is_option=TRUE } function endmenu () { : } function comment () { if [ "$comment_is_option" ] then comment_is_option= echo >>$CONFIG echo "#" >>$CONFIG echo "# $1" >>$CONFIG echo "#" >>$CONFIG echo >>$CONFIG_H echo "/*" >>$CONFIG_H echo " * $1" >>$CONFIG_H echo " */" >>$CONFIG_H fi } echo -n "." DEF_CONFIG="${1:-.config}" DEF_CONFIG_H="include/linux/autoconf.h" CONFIG=.tmpconfig CONFIG_H=.tmpconfig.h echo "#" >$CONFIG echo "# Automatically generated by make menuconfig: don't edit" >>$CONFIG echo "#" >>$CONFIG echo "/*" >$CONFIG_H echo " * Automatically generated by make menuconfig: don't edit" >>$CONFIG_H echo " */" >>$CONFIG_H echo "#define AUTOCONF_INCLUDED" >> $CONFIG_H echo -n "." if . $CONFIG_IN >>.menuconfig.log 2>&1 then if [ "$DEF_CONFIG" = ".config" ] then mv $CONFIG_H $DEF_CONFIG_H fi if [ -f "$DEF_CONFIG" ] then rm -f ${DEF_CONFIG}.old mv $DEF_CONFIG ${DEF_CONFIG}.old fi mv $CONFIG $DEF_CONFIG return 0 else return 1 fi } # # Remove temporary files # cleanup () { cleanup1 cleanup2 } cleanup1 () { rm -f MCmenu* MCradiolists MCdialog.out help.out } cleanup2 () { rm -f .tmpconfig .tmpconfig.h } set_geometry () { # Some distributions export these with incorrect values # which can really screw up some ncurses programs. LINES= COLUMNS= ROWS=${1:-24} COLS=${2:-80} # Just in case the nasty rlogin bug returns. # [ $ROWS = 0 ] && ROWS=24 [ $COLS = 0 ] && COLS=80 if [ $ROWS -lt 19 -o $COLS -lt 80 ] then echo -e "\n\007Your display is too small to run Menuconfig!" echo "It must be at least 19 lines by 80 columns." exit 1 fi ROWS=$((ROWS-4)) COLS=$((COLS-5)) } set_geometry `stty size 2>/dev/null` menu_instructions="\ Arrow keys navigate the menu. \ selects submenus --->. \ Highlighted letters are hotkeys. \ Pressing includes, excludes, modularizes features. \ Press to exit, for Help. \ Legend: [*] built-in [ ] excluded module < > module capable" radiolist_instructions="\ Use the arrow keys to navigate this window or \ press the hotkey of the item you wish to select \ followed by the . Press for additional information about this option." inputbox_instructions_int="\ Please enter a decimal value. \ Fractions will not be accepted. \ Use the key to move from the input field to the buttons below it." inputbox_instructions_hex="\ Please enter a hexadecimal value. \ Use the key to move from the input field to the buttons below it." inputbox_instructions_string="\ Please enter a string value. \ Use the key to move from the input field to the buttons below it." DIALOG="./scripts/lxdialog/lxdialog" kernel_version="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}" backtitle="Linux Kernel v$kernel_version Configuration" trap "cleanup ; exit 1" 1 2 15 # # Locate default files. # CONFIG_IN=./config.in if [ "$1" != "" ] ; then CONFIG_IN=$1 fi DEFAULTS=arch/$ARCH/defconfig if [ -f .config ]; then DEFAULTS=.config fi if [ -f $DEFAULTS ] then echo "Using defaults found in" $DEFAULTS load_config_file $DEFAULTS else echo "No defaults found" fi # Fresh new log. >.menuconfig.log # Load the functions used by the config.in files. echo -n "Preparing scripts: functions" load_functions if [ ! -e $CONFIG_IN ] then echo "Your main config.in file ($CONFIG_IN) does not exist" exit 1 fi if [ ! -x $DIALOG ] then echo "Your lxdialog utility does not exist" exit 1 fi # # Read config.in files and parse them into one shell function per menu. # echo -n ", parsing" parse_config_files $CONFIG_IN echo "done." # # Start the ball rolling from the top. # activate_menu MCmenu0 # # All done! # cleanup1 # # Confirm and Save # if $DIALOG --backtitle "$backtitle" \ --yesno "Do you wish to save your new kernel configuration?" 5 60 then save_configuration echo echo echo "*** End of Linux kernel configuration." echo "*** Check the top-level Makefile for additional configuration." if [ ! -f .hdepend -o "$CONFIG_MODVERSIONS" = "y" ] ; then echo "*** Next, you must run 'make dep'." else echo "*** Next, you may run 'make bzImage', 'make bzdisk', or 'make install'." fi echo else echo echo echo Your kernel configuration changes were NOT saved. echo fi # Remove log if empty. if [ ! -s .menuconfig.log ] ; then rm -f .menuconfig.log fi exit 0