===== kHTTPd - Kernel httpd accelerator (C) 1999 by Arjan van de Ven Licensed under the terms of the GNU General Public License ===== 1. Introduction --------------- kHTTPd is a http-daemon (webserver) for Linux. kHTTPd is different from other webservers in that it runs from within the Linux-kernel as a module (device-driver). kHTTPd handles only static (file based) web-pages, and passes all requests for non-static information to a regular userspace-webserver such as Apache or Zeus. The userspace-daemon doesn't have to be altered in any way. Static web-pages are not a very complex thing to serve, but these are very important nevertheless, since virtually all images are static, and a large portion of the html-pages are static also. A "regular" webserver has little added value for static pages, it is simply a "copy file to network"-operation. This can be done very efficiently from within the Linux-kernel, for example the nfs (network file system) daemon performs a similar task and also runs in the kernel. By "accelerating" the simple case within the kernel, userspace daemons can do what they are very good at: Generating user-specific, dynamic content. Note: This document sometimes uses "Apache" instead of "any webserver you ever might want to use", just for reasons of readability. 2. Quick Start -------------- 1) compile and load the module 2) configure the module in /proc/sys/net/khttpd if needed 3) echo 1 > /proc/sys/net/khttpd/start unloading: echo 1 > /proc/sys/net/khttpd/stop echo 1 > /proc/sys/net/khttpd/unload rmmod khttpd 3. Configuration ---------------- Modes of operation ================== There are two recommended modes of operation: 1) "Apache" is main webserver, kHTTPd is assistant clientport -> 80 serverport -> 8080 (or whatever) 2) kHTTPd is main webserver, "Apache" is assistant clientport -> 8080 (or whatever) serverport -> 80 Configuring kHTTPd ================== Before you can start using kHTTPd, you have to configure it. This is done through the /proc filesystem, and can thus be done from inside a script. Most parameters can only be set when kHTTPd is not active. The following things need configuration: 1) The port where kHTTPd should listen for requests 2) The port (on "localhost") where "Apache" is listening 3) The location of the documents (documentroot) 4) The strings that indicate dynamic content (optional) [ "cgi-bin" is added by default ] It is very important that the documentroot for kHTTPd matches the documentroot for the userspace-daemon, as kHTTPd might "redirect" any request to this userspace-daemon. A typical script (for the first mode of operation) to do this would look like: #!/bin/sh modprobe khttpd echo 80 > /proc/sys/net/khttpd/clientport echo 8080 > /proc/sys/net/khttpd/serverport echo /var/www > /proc/sys/net/khttpd/documentroot echo php3 > /proc/sys/net/khttpd/dynamic echo shtml > /proc/sys/net/khttpd/dynamic echo 1 > /proc/sys/net/khttpd/start For the second mode of operation, this would be: #!/bin/sh modprobe khttpd echo 8080 > /proc/sys/net/khttpd/clientport echo 80 > /proc/sys/net/khttpd/serverport echo /var/www > /proc/sys/net/khttpd/documentroot echo php3 > /proc/sys/net/khttpd/dynamic echo shtml > /proc/sys/net/khttpd/dynamic echo 1 > /proc/sys/net/khttpd/start In this case, you also have to change the configuration of the userspace-daemon. For Apache, you do this by changing Port 80 to Port 8080 Stopping kHTTPd =============== In order to change the configuration, you should stop kHTTPd by typing echo 1 > /proc/sys/net/khttpd/stop on a command-prompt. If you want to unload the module, you should type echo 1 > /proc/sys/net/khttpd/unload after stopping kHTTPd first. If this doesn't work fast enough for you (the commands above can wait for a remote connection to close down), you can send the daemons a "HUP" signal after you told them to stop. This will cause the daemon-threads to stop immediately. Note that the daemons will restart immediately if they are not told to stop. 4. Permissions -------------- The security model of kHTTPd is very strict. It can be, since there is a userspace daemon that can handle the complex exceptions. kHTTPd only serves a file if 1) There is no "?" in the URL 2) The URL starts with a "/" 3) The file indicated by the URL exists 4) The file is world-readable (*) 5) The file is not a directory, executable or has the Sticky-bit set (*) 6) The URL doesn't contain any "forbidden" substrings such as ".." and "cgi-bin" (*) 7) The mime-type is known (*) The items marked with a (*) are configurable through the sysctl-parameters in /proc/sys/net/khttpd. In all cases where any of the above conditions isn't met, the userspace-daemon is handed the request. 5. Parameters ------------- The following parameters are settable through /proc/sys/net/khttpd: Name Default Description serverport 8080 The port where kHTTPd listens on clientport 80 The port of the userspace http-daemon threads 2 The number of server-threads. Should be 1 per CPU for small websites, 2 per CPU for big (the active files do not fit in the RAM) websites. documentroot /var/www the directory where the document-files are start 0 Set to 1 to start kHTTPd (this also resets "stop" to 0) stop 0 Set to 1 to stop kHTTPd (this also resets "start" to 0) unload 0 Set to 1 to prepare kHTTPd for unloading of the module sloppymime 0 If set to 1, unknown mime-types are set to text/html. If set to 0, files with unknown mime-types are handled by the userspace daemon perm_required S_IROTH Minimum permissions required (for values see "man 2 stat") perm_forbid dir+sticky+ Permission-mask with "forbidden" execute permissions. (for values see "man 2 stat") dynamic cgi-bin .. Strings that, if they are a subset of the URL, indicate "dynamic content" maxconnect 1000 Maximum number of concurrent connections 6. More information ------------------- More information about the architecture of kHTTPd, the mailinglist and configuration-examples can be found at the kHTTPd homepage: http://www.fenrus.demon.nl Bugreports, patches, etc can be send to the mailinglist (khttpd-users@zgp.org) or to khttpd@fenrus.demon.nl