/********************************************************************* * * Filename: ircomm_tty.c * Version: 1.0 * Description: IrCOMM serial TTY driver * Status: Experimental. * Author: Dag Brattli * Created at: Sun Jun 6 21:00:56 1999 * Modified at: Wed Feb 23 00:09:02 2000 * Modified by: Dag Brattli * Sources: serial.c and previous IrCOMM work by Takahide Higuchi * * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * ********************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static int ircomm_tty_open(struct tty_struct *tty, struct file *filp); static void ircomm_tty_close(struct tty_struct * tty, struct file *filp); static int ircomm_tty_write(struct tty_struct * tty, int from_user, const unsigned char *buf, int count); static int ircomm_tty_write_room(struct tty_struct *tty); static void ircomm_tty_throttle(struct tty_struct *tty); static void ircomm_tty_unthrottle(struct tty_struct *tty); static int ircomm_tty_chars_in_buffer(struct tty_struct *tty); static void ircomm_tty_flush_buffer(struct tty_struct *tty); static void ircomm_tty_send_xchar(struct tty_struct *tty, char ch); static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout); static void ircomm_tty_hangup(struct tty_struct *tty); static void ircomm_tty_do_softint(void *private_); static void ircomm_tty_shutdown(struct ircomm_tty_cb *self); static int ircomm_tty_data_indication(void *instance, void *sap, struct sk_buff *skb); static int ircomm_tty_control_indication(void *instance, void *sap, struct sk_buff *skb); static void ircomm_tty_flow_indication(void *instance, void *sap, LOCAL_FLOW cmd); #ifdef CONFIG_PROC_FS static int ircomm_tty_read_proc(char *buf, char **start, off_t offset, int len, int *eof, void *unused); #endif /* CONFIG_PROC_FS */ static struct tty_driver driver; static int ircomm_tty_refcount; /* If we manage several devices */ static struct tty_struct *ircomm_tty_table[NR_PTYS]; static struct termios *ircomm_tty_termios[NR_PTYS]; static struct termios *ircomm_tty_termios_locked[NR_PTYS]; hashbin_t *ircomm_tty = NULL; /* * Function ircomm_tty_init() * * Init IrCOMM TTY layer/driver * */ int __init ircomm_tty_init(void) { ircomm_tty = hashbin_new(HB_LOCAL); if (ircomm_tty == NULL) { ERROR(__FUNCTION__ "(), can't allocate hashbin!\n"); return -ENOMEM; } memset(&driver, 0, sizeof(struct tty_driver)); driver.magic = TTY_DRIVER_MAGIC; driver.driver_name = "ircomm"; #ifdef CONFIG_DEVFS_FS driver.name = "ircomm%d"; #else driver.name = "ircomm"; #endif driver.major = IRCOMM_TTY_MAJOR; driver.minor_start = IRCOMM_TTY_MINOR; driver.num = IRCOMM_TTY_PORTS; driver.type = TTY_DRIVER_TYPE_SERIAL; driver.subtype = SERIAL_TYPE_NORMAL; driver.init_termios = tty_std_termios; driver.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; driver.flags = TTY_DRIVER_REAL_RAW; driver.refcount = &ircomm_tty_refcount; driver.table = ircomm_tty_table; driver.termios = ircomm_tty_termios; driver.termios_locked = ircomm_tty_termios_locked; driver.open = ircomm_tty_open; driver.close = ircomm_tty_close; driver.write = ircomm_tty_write; driver.write_room = ircomm_tty_write_room; driver.chars_in_buffer = ircomm_tty_chars_in_buffer; driver.flush_buffer = ircomm_tty_flush_buffer; driver.ioctl = ircomm_tty_ioctl; driver.throttle = ircomm_tty_throttle; driver.unthrottle = ircomm_tty_unthrottle; driver.send_xchar = ircomm_tty_send_xchar; driver.set_termios = ircomm_tty_set_termios; driver.stop = ircomm_tty_stop; driver.start = ircomm_tty_start; driver.hangup = ircomm_tty_hangup; driver.wait_until_sent = ircomm_tty_wait_until_sent; #ifdef CONFIG_PROC_FS driver.read_proc = ircomm_tty_read_proc; #endif /* CONFIG_PROC_FS */ if (tty_register_driver(&driver)) { ERROR(__FUNCTION__ "Couldn't register serial driver\n"); return -1; } return 0; } #ifdef MODULE static void __ircomm_tty_cleanup(struct ircomm_tty_cb *self) { IRDA_DEBUG(0, __FUNCTION__ "()\n"); ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); ircomm_tty_shutdown(self); self->magic = 0; kfree(self); } /* * Function ircomm_tty_cleanup () * * Remove IrCOMM TTY layer/driver * */ void ircomm_tty_cleanup(void) { int ret; IRDA_DEBUG(4, __FUNCTION__"()\n"); ret = tty_unregister_driver(&driver); if (ret) { ERROR(__FUNCTION__ "(), failed to unregister driver\n"); return; } hashbin_delete(ircomm_tty, (FREE_FUNC) __ircomm_tty_cleanup); } #endif /* MODULE */ /* * Function ircomm_startup (self) * * * */ static int ircomm_tty_startup(struct ircomm_tty_cb *self) { notify_t notify; int ret; IRDA_DEBUG(2, __FUNCTION__ "()\n"); ASSERT(self != NULL, return -1;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); /* Already open */ if (self->flags & ASYNC_INITIALIZED) { IRDA_DEBUG(2, __FUNCTION__ "(), already open so break out!\n"); return 0; } /* Register with IrCOMM */ irda_notify_init(¬ify); /* These callbacks we must handle ourselves */ notify.data_indication = ircomm_tty_data_indication; notify.udata_indication = ircomm_tty_control_indication; notify.flow_indication = ircomm_tty_flow_indication; /* Use the ircomm_tty interface for these ones */ notify.disconnect_indication = ircomm_tty_disconnect_indication; notify.connect_confirm = ircomm_tty_connect_confirm; notify.connect_indication = ircomm_tty_connect_indication; strncpy(notify.name, "ircomm_tty", NOTIFY_MAX_NAME); notify.instance = self; if (!self->ircomm) { self->ircomm = ircomm_open(¬ify, self->service_type, self->line); } if (!self->ircomm) return -ENODEV; self->slsap_sel = self->ircomm->slsap_sel; /* Connect IrCOMM link with remote device */ ret = ircomm_tty_attach_cable(self); if (ret < 0) { ERROR(__FUNCTION__ "(), error attaching cable!\n"); return ret; } self->flags |= ASYNC_INITIALIZED; return 0; } /* * Function ircomm_block_til_ready (self, filp) * * * */ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self, struct file *filp) { DECLARE_WAITQUEUE(wait, current); int retval; int do_clocal = 0, extra_count = 0; unsigned long flags; struct tty_struct *tty; IRDA_DEBUG(2, __FUNCTION__ "()\n"); tty = self->tty; if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) { /* this is a callout device */ /* just verify that normal device is not in use */ if (self->flags & ASYNC_NORMAL_ACTIVE) return -EBUSY; if ((self->flags & ASYNC_CALLOUT_ACTIVE) && (self->flags & ASYNC_SESSION_LOCKOUT) && (self->session != current->session)) return -EBUSY; if ((self->flags & ASYNC_CALLOUT_ACTIVE) && (self->flags & ASYNC_PGRP_LOCKOUT) && (self->pgrp != current->pgrp)) return -EBUSY; self->flags |= ASYNC_CALLOUT_ACTIVE; return 0; } /* * If non-blocking mode is set, or the port is not enabled, * then make the check up front and then exit. */ if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ /* nonblock mode is set or port is not enabled */ /* just verify that callout device is not active */ if (self->flags & ASYNC_CALLOUT_ACTIVE) return -EBUSY; self->flags |= ASYNC_NORMAL_ACTIVE; IRDA_DEBUG(1, __FUNCTION__ "(), O_NONBLOCK requested!\n"); return 0; } if (self->flags & ASYNC_CALLOUT_ACTIVE) { if (self->normal_termios.c_cflag & CLOCAL) { IRDA_DEBUG(1, __FUNCTION__ "(), doing CLOCAL!\n"); do_clocal = 1; } } else { if (tty->termios->c_cflag & CLOCAL) { IRDA_DEBUG(1, __FUNCTION__ "(), doing CLOCAL!\n"); do_clocal = 1; } } /* Wait for carrier detect and the line to become * free (i.e., not in use by the callout). While we are in * this loop, self->open_count is dropped by one, so that * mgsl_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; add_wait_queue(&self->open_wait, &wait); IRDA_DEBUG(2, "%s(%d):block_til_ready before block on %s open_count=%d\n", __FILE__,__LINE__, tty->driver.name, self->open_count ); save_flags(flags); cli(); if (!tty_hung_up_p(filp)) { extra_count = 1; self->open_count--; } restore_flags(flags); self->blocked_open++; while (1) { if (!(self->flags & ASYNC_CALLOUT_ACTIVE) && (tty->termios->c_cflag & CBAUD)) { save_flags(flags); cli(); self->settings.dte |= IRCOMM_RTS + IRCOMM_DTR; ircomm_param_request(self, IRCOMM_DTE, TRUE); restore_flags(flags); } current->state = TASK_INTERRUPTIBLE; if (tty_hung_up_p(filp) || !(self->flags & ASYNC_INITIALIZED)){ retval = (self->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS; break; } /* * Check if link is ready now. Even if CLOCAL is * specified, we cannot return before the IrCOMM link is * ready */ if (!(self->flags & ASYNC_CALLOUT_ACTIVE) && !(self->flags & ASYNC_CLOSING) && (do_clocal || (self->settings.dce & IRCOMM_CD)) && self->state == IRCOMM_TTY_READY) { break; } if (signal_pending(current)) { retval = -ERESTARTSYS; break; } IRDA_DEBUG(1, "%s(%d):block_til_ready blocking on %s open_count=%d\n", __FILE__,__LINE__, tty->driver.name, self->open_count ); schedule(); } __set_current_state(TASK_RUNNING); remove_wait_queue(&self->open_wait, &wait); if (extra_count) self->open_count++; self->blocked_open--; IRDA_DEBUG(1, "%s(%d):block_til_ready after blocking on %s open_count=%d\n", __FILE__,__LINE__, tty->driver.name, self->open_count); if (!retval) self->flags |= ASYNC_NORMAL_ACTIVE; return retval; } /* * Function ircomm_tty_open (tty, filp) * * This routine is called when a particular tty device is opened. This * routine is mandatory; if this routine is not filled in, the attempted * open will fail with ENODEV. */ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) { struct ircomm_tty_cb *self; int line; int ret; IRDA_DEBUG(2, __FUNCTION__ "()\n"); MOD_INC_USE_COUNT; line = MINOR(tty->device) - tty->driver.minor_start; if ((line < 0) || (line >= IRCOMM_TTY_PORTS)) { MOD_DEC_USE_COUNT; return -ENODEV; } /* Check if instance already exists */ self = hashbin_find(ircomm_tty, line, NULL); if (!self) { /* No, so make new instance */ self = kmalloc(sizeof(struct ircomm_tty_cb), GFP_KERNEL); if (self == NULL) { ERROR(__FUNCTION__"(), kmalloc failed!\n"); MOD_DEC_USE_COUNT; return -ENOMEM; } memset(self, 0, sizeof(struct ircomm_tty_cb)); self->magic = IRCOMM_TTY_MAGIC; self->flow = FLOW_STOP; self->line = line; self->tqueue.routine = ircomm_tty_do_softint; self->tqueue.data = self; self->max_header_size = 5; self->max_data_size = 64-self->max_header_size; self->close_delay = 5*HZ/10; self->closing_wait = 30*HZ; /* Init some important stuff */ init_timer(&self->watchdog_timer); init_waitqueue_head(&self->open_wait); init_waitqueue_head(&self->close_wait); /* * Force TTY into raw mode by default which is usually what * we want for IrCOMM and IrLPT. This way applications will * not have to twiddle with printcap etc. */ tty->termios->c_iflag = 0; tty->termios->c_oflag = 0; /* Insert into hash */ hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL); } self->open_count++; tty->driver_data = self; self->tty = tty; IRDA_DEBUG(1, __FUNCTION__"(), %s%d, count = %d\n", tty->driver.name, self->line, self->open_count); /* Not really used by us, but lets do it anyway */ self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0; /* * If the port is the middle of closing, bail out now */ if (tty_hung_up_p(filp) || (self->flags & ASYNC_CLOSING)) { if (self->flags & ASYNC_CLOSING) interruptible_sleep_on(&self->close_wait); /* MOD_DEC_USE_COUNT; "info->tty" will cause this? */ #ifdef SERIAL_DO_RESTART return ((self->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); #else return -EAGAIN; #endif } /* Check if this is a "normal" ircomm device, or an irlpt device */ if (line < 0x10) { self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE; self->settings.service_type = IRCOMM_9_WIRE; /* 9 wire as default */ self->settings.dce = IRCOMM_CTS | IRCOMM_CD; /* Default line settings */ IRDA_DEBUG(2, __FUNCTION__ "(), IrCOMM device\n"); } else { IRDA_DEBUG(2, __FUNCTION__ "(), IrLPT device\n"); self->service_type = IRCOMM_3_WIRE_RAW; self->settings.service_type = IRCOMM_3_WIRE_RAW; /* Default */ } ret = ircomm_tty_startup(self); if (ret) return ret; ret = ircomm_tty_block_til_ready(self, filp); if (ret) { /* MOD_DEC_USE_COUNT; "info->tty" will cause this? */ IRDA_DEBUG(2, __FUNCTION__ "(), returning after block_til_ready with %d\n", ret); return ret; } self->session = current->session; self->pgrp = current->pgrp; return 0; } /* * Function ircomm_tty_close (tty, filp) * * This routine is called when a particular tty device is closed. * */ static void ircomm_tty_close(struct tty_struct *tty, struct file *filp) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; unsigned long flags; IRDA_DEBUG(0, __FUNCTION__ "()\n"); if (!tty) return; save_flags(flags); cli(); if (tty_hung_up_p(filp)) { MOD_DEC_USE_COUNT; restore_flags(flags); IRDA_DEBUG(0, __FUNCTION__ "(), returning 1\n"); return; } ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); if ((tty->count == 1) && (self->open_count != 1)) { /* * Uh, oh. tty->count is 1, which means that the tty * structure will be freed. state->count should always * be one in these conditions. If it's greater than * one, we've got real problems, since it means the * serial port won't be shutdown. */ IRDA_DEBUG(0, __FUNCTION__ "(), bad serial port count; " "tty->count is 1, state->count is %d\n", self->open_count); self->open_count = 1; } if (--self->open_count < 0) { ERROR(__FUNCTION__ "(), bad serial port count for ttys%d: %d\n", self->line, self->open_count); self->open_count = 0; } if (self->open_count) { MOD_DEC_USE_COUNT; restore_flags(flags); IRDA_DEBUG(0, __FUNCTION__ "(), open count > 0\n"); return; } self->flags |= ASYNC_CLOSING; /* * Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. */ tty->closing = 1; if (self->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, self->closing_wait); ircomm_tty_shutdown(self); if (tty->driver.flush_buffer) tty->driver.flush_buffer(tty); if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty); tty->closing = 0; self->tty = 0; if (self->blocked_open) { if (self->close_delay) { current->state = TASK_INTERRUPTIBLE; schedule_timeout(self->close_delay); } wake_up_interruptible(&self->open_wait); } self->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE| ASYNC_CLOSING); wake_up_interruptible(&self->close_wait); MOD_DEC_USE_COUNT; restore_flags(flags); } /* * Function ircomm_tty_flush_buffer (tty) * * * */ static void ircomm_tty_flush_buffer(struct tty_struct *tty) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); /* * Let do_softint() do this to avoid race condition with * do_softint() ;-) */ queue_task(&self->tqueue, &tq_immediate); mark_bh(IMMEDIATE_BH); } /* * Function ircomm_tty_do_softint (private_) * * We use this routine to give the write wakeup to the user at at a * safe time (as fast as possible after write have completed). This * can be compared to the Tx interrupt. */ static void ircomm_tty_do_softint(void *private_) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) private_; struct tty_struct *tty; unsigned long flags; struct sk_buff *skb, *ctrl_skb; IRDA_DEBUG(2, __FUNCTION__ "()\n"); if (!self || self->magic != IRCOMM_TTY_MAGIC) return; tty = self->tty; if (!tty) return; /* Unlink control buffer */ save_flags(flags); cli(); ctrl_skb = self->ctrl_skb; self->ctrl_skb = NULL; restore_flags(flags); /* Flush control buffer if any */ if (ctrl_skb && self->flow == FLOW_START) ircomm_control_request(self->ircomm, ctrl_skb); if (tty->hw_stopped) return; /* Unlink transmit buffer */ save_flags(flags); cli(); skb = self->tx_skb; self->tx_skb = NULL; restore_flags(flags); /* Flush transmit buffer if any */ if (skb) ircomm_tty_do_event(self, IRCOMM_TTY_DATA_REQUEST, skb, NULL); /* Check if user (still) wants to be waken up */ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup) { (tty->ldisc.write_wakeup)(tty); } wake_up_interruptible(&tty->write_wait); } /* * Function ircomm_tty_write (tty, from_user, buf, count) * * This routine is called by the kernel to write a series of characters * to the tty device. The characters may come from user space or kernel * space. This routine will return the number of characters actually * accepted for writing. This routine is mandatory. */ static int ircomm_tty_write(struct tty_struct *tty, int from_user, const unsigned char *buf, int count) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; unsigned long flags; struct sk_buff *skb; int tailroom = 0; int len = 0; int size; IRDA_DEBUG(2, __FUNCTION__ "(), count=%d, hw_stopped=%d\n", count, tty->hw_stopped); ASSERT(self != NULL, return -1;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); save_flags(flags); cli(); /* Fetch current transmit buffer */ skb = self->tx_skb; /* * Send out all the data we get, possibly as multiple fragmented * frames, but this will only happen if the data is larger than the * max data size. The normal case however is just the opposite, and * this function may be called multiple times, and will then actually * defragment the data and send it out as one packet as soon as * possible, but at a safer point in time */ while (count) { size = count; /* Adjust data size to the max data size */ if (size > self->max_data_size) size = self->max_data_size; /* * Do we already have a buffer ready for transmit, or do * we need to allocate a new frame */ if (skb) { /* * Any room for more data at the end of the current * transmit buffer? Cannot use skb_tailroom, since * dev_alloc_skb gives us a larger skb than we * requested */ if ((tailroom = (self->max_data_size-skb->len)) > 0) { /* Adjust data to tailroom */ if (size > tailroom) size = tailroom; } else { /* * Current transmit frame is full, so break * out, so we can send it as soon as possible */ break; } } else { /* Prepare a full sized frame */ skb = dev_alloc_skb(self->max_data_size+ self->max_header_size); if (!skb) { restore_flags(flags); return -ENOBUFS; } skb_reserve(skb, self->max_header_size); self->tx_skb = skb; } /* Copy data */ if (from_user) copy_from_user(skb_put(skb,size), buf+len, size); else memcpy(skb_put(skb,size), buf+len, size); count -= size; len += size; } restore_flags(flags); /* * Schedule a new thread which will transmit the frame as soon * as possible, but at a safe point in time. We do this so the * "user" can give us data multiple times, as PPP does (because of * its 256 byte tx buffer). We will then defragment and send out * all this data as one single packet. */ queue_task(&self->tqueue, &tq_immediate); mark_bh(IMMEDIATE_BH); return len; } /* * Function ircomm_tty_write_room (tty) * * This routine returns the numbers of characters the tty driver will * accept for queuing to be written. This number is subject to change as * output buffers get emptied, or if the output flow control is acted. */ static int ircomm_tty_write_room(struct tty_struct *tty) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; unsigned long flags; int ret; ASSERT(self != NULL, return -1;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); /* Check if we are allowed to transmit any data */ if (tty->hw_stopped) ret = 0; else { save_flags(flags); cli(); if (self->tx_skb) ret = self->max_data_size - self->tx_skb->len; else ret = self->max_data_size; restore_flags(flags); } IRDA_DEBUG(2, __FUNCTION__ "(), ret=%d\n", ret); return ret; } /* * Function ircomm_tty_wait_until_sent (tty, timeout) * * This routine waits until the device has written out all of the * characters in its transmitter FIFO. */ static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; unsigned long orig_jiffies, poll_time; IRDA_DEBUG(2, __FUNCTION__ "()\n"); ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); orig_jiffies = jiffies; /* Set poll time to 200 ms */ poll_time = IRDA_MIN(timeout, MSECS_TO_JIFFIES(200)); while (self->tx_skb && self->tx_skb->len) { current->state = TASK_INTERRUPTIBLE; schedule_timeout(poll_time); if (signal_pending(current)) break; if (timeout && time_after(jiffies, orig_jiffies + timeout)) break; } current->state = TASK_RUNNING; } /* * Function ircomm_tty_throttle (tty) * * This routine notifies the tty driver that input buffers for the line * discipline are close to full, and it should somehow signal that no * more characters should be sent to the tty. */ static void ircomm_tty_throttle(struct tty_struct *tty) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; IRDA_DEBUG(2, __FUNCTION__ "()\n"); ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); /* Software flow control? */ if (I_IXOFF(tty)) ircomm_tty_send_xchar(tty, STOP_CHAR(tty)); /* Hardware flow control? */ if (tty->termios->c_cflag & CRTSCTS) { self->settings.dte &= ~IRCOMM_RTS; self->settings.dte |= IRCOMM_DELTA_RTS; ircomm_param_request(self, IRCOMM_DTE, TRUE); } ircomm_flow_request(self->ircomm, FLOW_STOP); } /* * Function ircomm_tty_unthrottle (tty) * * This routine notifies the tty drivers that it should signals that * characters can now be sent to the tty without fear of overrunning the * input buffers of the line disciplines. */ static void ircomm_tty_unthrottle(struct tty_struct *tty) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; IRDA_DEBUG(2, __FUNCTION__ "()\n"); ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); /* Using software flow control? */ if (I_IXOFF(tty)) { ircomm_tty_send_xchar(tty, START_CHAR(tty)); } /* Using hardware flow control? */ if (tty->termios->c_cflag & CRTSCTS) { self->settings.dte |= (IRCOMM_RTS|IRCOMM_DELTA_RTS); ircomm_param_request(self, IRCOMM_DTE, TRUE); IRDA_DEBUG(1, __FUNCTION__"(), FLOW_START\n"); } ircomm_flow_request(self->ircomm, FLOW_START); } /* * Function ircomm_tty_chars_in_buffer (tty) * * Indicates if there are any data in the buffer * */ static int ircomm_tty_chars_in_buffer(struct tty_struct *tty) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; unsigned long flags; int len = 0; ASSERT(self != NULL, return -1;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); save_flags(flags); cli(); if (self->tx_skb) len = self->tx_skb->len; restore_flags(flags); return len; } static void ircomm_tty_shutdown(struct ircomm_tty_cb *self) { unsigned long flags; ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); IRDA_DEBUG(0, __FUNCTION__ "()\n"); if (!(self->flags & ASYNC_INITIALIZED)) return; save_flags(flags); cli(); del_timer(&self->watchdog_timer); /* Free parameter buffer */ if (self->ctrl_skb) { dev_kfree_skb(self->ctrl_skb); self->ctrl_skb = NULL; } /* Free transmit buffer */ if (self->tx_skb) { dev_kfree_skb(self->tx_skb); self->tx_skb = NULL; } ircomm_tty_detach_cable(self); if (self->ircomm) { ircomm_close(self->ircomm); self->ircomm = NULL; } self->flags &= ~ASYNC_INITIALIZED; restore_flags(flags); } /* * Function ircomm_tty_hangup (tty) * * This routine notifies the tty driver that it should hangup the tty * device. * */ static void ircomm_tty_hangup(struct tty_struct *tty) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; IRDA_DEBUG(0, __FUNCTION__"()\n"); ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); if (!tty) return; /* ircomm_tty_flush_buffer(tty); */ ircomm_tty_shutdown(self); self->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE); self->tty = 0; self->open_count = 0; wake_up_interruptible(&self->open_wait); } /* * Function ircomm_tty_send_xchar (tty, ch) * * This routine is used to send a high-priority XON/XOFF character to * the device. */ static void ircomm_tty_send_xchar(struct tty_struct *tty, char ch) { IRDA_DEBUG(0, __FUNCTION__"(), not impl\n"); } /* * Function ircomm_tty_start (tty) * * This routine notifies the tty driver that it resume sending * characters to the tty device. */ void ircomm_tty_start(struct tty_struct *tty) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; ircomm_flow_request(self->ircomm, FLOW_START); } /* * Function ircomm_tty_stop (tty) * * This routine notifies the tty driver that it should stop outputting * characters to the tty device. */ void ircomm_tty_stop(struct tty_struct *tty) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); ircomm_flow_request(self->ircomm, FLOW_STOP); } /* * Function ircomm_check_modem_status (self) * * Check for any changes in the DCE's line settings. This function should * be called whenever the dce parameter settings changes, to update the * flow control settings and other things */ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self) { struct tty_struct *tty; int status; IRDA_DEBUG(0, __FUNCTION__ "()\n"); ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); tty = self->tty; status = self->settings.dce; if (status & IRCOMM_DCE_DELTA_ANY) { /*wake_up_interruptible(&self->delta_msr_wait);*/ } if ((self->flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) { IRDA_DEBUG(2, __FUNCTION__ "(), ircomm%d CD now %s...\n", self->line, (status & IRCOMM_CD) ? "on" : "off"); if (status & IRCOMM_CD) { wake_up_interruptible(&self->open_wait); } else if (!((self->flags & ASYNC_CALLOUT_ACTIVE) && (self->flags & ASYNC_CALLOUT_NOHUP))) { IRDA_DEBUG(2, __FUNCTION__ "(), Doing serial hangup..\n"); if (tty) tty_hangup(tty); /* Hangup will remote the tty, so better break out */ return; } } if (self->flags & ASYNC_CTS_FLOW) { if (tty->hw_stopped) { if (status & IRCOMM_CTS) { IRDA_DEBUG(2, __FUNCTION__ "(), CTS tx start...\n"); tty->hw_stopped = 0; /* Wake up processes blocked on open */ wake_up_interruptible(&self->open_wait); queue_task(&self->tqueue, &tq_immediate); mark_bh(IMMEDIATE_BH); return; } } else { if (!(status & IRCOMM_CTS)) { IRDA_DEBUG(2, __FUNCTION__ "(), CTS tx stop...\n"); tty->hw_stopped = 1; } } } } /* * Function ircomm_tty_data_indication (instance, sap, skb) * * Handle incoming data, and deliver it to the line discipline * */ static int ircomm_tty_data_indication(void *instance, void *sap, struct sk_buff *skb) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; IRDA_DEBUG(2, __FUNCTION__"()\n"); ASSERT(self != NULL, return -1;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); ASSERT(skb != NULL, return -1;); if (!self->tty) { IRDA_DEBUG(0, __FUNCTION__ "(), no tty!\n"); dev_kfree_skb(skb); return 0; } /* * If we receive data when hardware is stopped then something is wrong. * We try to poll the peers line settings to check if we are up todate. * Devices like WinCE can do this, and since they don't send any * params, we can just as well declare the hardware for running. */ if (self->tty->hw_stopped && (self->flow == FLOW_START)) { IRDA_DEBUG(0, __FUNCTION__ "(), polling for line settings!\n"); ircomm_param_request(self, IRCOMM_POLL, TRUE); /* We can just as well declare the hardware for running */ ircomm_tty_send_initial_parameters(self); ircomm_tty_link_established(self); } /* * Just give it over to the line discipline. There is no need to * involve the flip buffers, since we are not running in an interrupt * handler */ self->tty->ldisc.receive_buf(self->tty, skb->data, NULL, skb->len); dev_kfree_skb(skb); return 0; } /* * Function ircomm_tty_control_indication (instance, sap, skb) * * Parse all incoming parameters (easy!) * */ static int ircomm_tty_control_indication(void *instance, void *sap, struct sk_buff *skb) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; int clen; IRDA_DEBUG(4, __FUNCTION__"()\n"); ASSERT(self != NULL, return -1;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); ASSERT(skb != NULL, return -1;); clen = skb->data[0]; irda_param_extract_all(self, skb->data+1, IRDA_MIN(skb->len-1, clen), &ircomm_param_info); dev_kfree_skb(skb); return 0; } /* * Function ircomm_tty_flow_indication (instance, sap, cmd) * * This function is called by IrTTP when it wants us to slow down the * transmission of data. We just mark the hardware as stopped, and wait * for IrTTP to notify us that things are OK again. */ static void ircomm_tty_flow_indication(void *instance, void *sap, LOCAL_FLOW cmd) { struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; struct tty_struct *tty; ASSERT(self != NULL, return;); ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); tty = self->tty; switch (cmd) { case FLOW_START: IRDA_DEBUG(2, __FUNCTION__ "(), hw start!\n"); tty->hw_stopped = 0; /* ircomm_tty_do_softint will take care of the rest */ queue_task(&self->tqueue, &tq_immediate); mark_bh(IMMEDIATE_BH); break; default: /* If we get here, something is very wrong, better stop */ case FLOW_STOP: IRDA_DEBUG(2, __FUNCTION__ "(), hw stopped!\n"); tty->hw_stopped = 1; break; } self->flow = cmd; } static int ircomm_tty_line_info(struct ircomm_tty_cb *self, char *buf) { int ret=0; ret += sprintf(buf+ret, "State: %s\n", ircomm_tty_state[self->state]); ret += sprintf(buf+ret, "Service type: "); if (self->service_type & IRCOMM_9_WIRE) ret += sprintf(buf+ret, "9_WIRE"); else if (self->service_type & IRCOMM_3_WIRE) ret += sprintf(buf+ret, "3_WIRE"); else if (self->service_type & IRCOMM_3_WIRE_RAW) ret += sprintf(buf+ret, "3_WIRE_RAW"); else ret += sprintf(buf+ret, "No common service type!\n"); ret += sprintf(buf+ret, "\n"); ret += sprintf(buf+ret, "Port name: %s\n", self->settings.port_name); ret += sprintf(buf+ret, "DTE status: "); if (self->settings.dte & IRCOMM_RTS) ret += sprintf(buf+ret, "RTS|"); if (self->settings.dte & IRCOMM_DTR) ret += sprintf(buf+ret, "DTR|"); if (self->settings.dte) ret--; /* remove the last | */ ret += sprintf(buf+ret, "\n"); ret += sprintf(buf+ret, "DCE status: "); if (self->settings.dce & IRCOMM_CTS) ret += sprintf(buf+ret, "CTS|"); if (self->settings.dce & IRCOMM_DSR) ret += sprintf(buf+ret, "DSR|"); if (self->settings.dce & IRCOMM_CD) ret += sprintf(buf+ret, "CD|"); if (self->settings.dce & IRCOMM_RI) ret += sprintf(buf+ret, "RI|"); if (self->settings.dce) ret--; /* remove the last | */ ret += sprintf(buf+ret, "\n"); ret += sprintf(buf+ret, "Configuration: "); if (!self->settings.null_modem) ret += sprintf(buf+ret, "DTE <-> DCE\n"); else ret += sprintf(buf+ret, "DTE <-> DTE (null modem emulation)\n"); ret += sprintf(buf+ret, "Data rate: %d\n", self->settings.data_rate); ret += sprintf(buf+ret, "Flow control: "); if (self->settings.flow_control & IRCOMM_XON_XOFF_IN) ret += sprintf(buf+ret, "XON_XOFF_IN|"); if (self->settings.flow_control & IRCOMM_XON_XOFF_OUT) ret += sprintf(buf+ret, "XON_XOFF_OUT|"); if (self->settings.flow_control & IRCOMM_RTS_CTS_IN) ret += sprintf(buf+ret, "RTS_CTS_IN|"); if (self->settings.flow_control & IRCOMM_RTS_CTS_OUT) ret += sprintf(buf+ret, "RTS_CTS_OUT|"); if (self->settings.flow_control & IRCOMM_DSR_DTR_IN) ret += sprintf(buf+ret, "DSR_DTR_IN|"); if (self->settings.flow_control & IRCOMM_DSR_DTR_OUT) ret += sprintf(buf+ret, "DSR_DTR_OUT|"); if (self->settings.flow_control & IRCOMM_ENQ_ACK_IN) ret += sprintf(buf+ret, "ENQ_ACK_IN|"); if (self->settings.flow_control & IRCOMM_ENQ_ACK_OUT) ret += sprintf(buf+ret, "ENQ_ACK_OUT|"); if (self->settings.flow_control) ret--; /* remove the last | */ ret += sprintf(buf+ret, "\n"); ret += sprintf(buf+ret, "Flags: "); if (self->flags & ASYNC_CTS_FLOW) ret += sprintf(buf+ret, "ASYNC_CTS_FLOW|"); if (self->flags & ASYNC_CHECK_CD) ret += sprintf(buf+ret, "ASYNC_CHECK_CD|"); if (self->flags & ASYNC_INITIALIZED) ret += sprintf(buf+ret, "ASYNC_INITIALIZED|"); if (self->flags & ASYNC_LOW_LATENCY) ret += sprintf(buf+ret, "ASYNC_LOW_LATENCY|"); if (self->flags & ASYNC_CLOSING) ret += sprintf(buf+ret, "ASYNC_CLOSING|"); if (self->flags & ASYNC_NORMAL_ACTIVE) ret += sprintf(buf+ret, "ASYNC_NORMAL_ACTIVE|"); if (self->flags & ASYNC_CALLOUT_ACTIVE) ret += sprintf(buf+ret, "ASYNC_CALLOUT_ACTIVE|"); if (self->flags) ret--; /* remove the last | */ ret += sprintf(buf+ret, "\n"); ret += sprintf(buf+ret, "Role: %s\n", self->client ? "client" : "server"); ret += sprintf(buf+ret, "Open count: %d\n", self->open_count); ret += sprintf(buf+ret, "Max data size: %d\n", self->max_data_size); ret += sprintf(buf+ret, "Max header size: %d\n", self->max_header_size); if (self->tty) ret += sprintf(buf+ret, "Hardware: %s\n", self->tty->hw_stopped ? "Stopped" : "Running"); ret += sprintf(buf+ret, "\n"); return ret; } /* * Function ircomm_tty_read_proc (buf, start, offset, len, eof, unused) * * * */ #ifdef CONFIG_PROC_FS static int ircomm_tty_read_proc(char *buf, char **start, off_t offset, int len, int *eof, void *unused) { struct ircomm_tty_cb *self; int count = 0, l; off_t begin = 0; self = (struct ircomm_tty_cb *) hashbin_get_first(ircomm_tty); while ((self != NULL) && (count < 4000)) { if (self->magic != IRCOMM_TTY_MAGIC) return 0; l = ircomm_tty_line_info(self, buf + count); count += l; if (count+begin > offset+len) goto done; if (count+begin < offset) { begin += count; count = 0; } self = (struct ircomm_tty_cb *) hashbin_get_next(ircomm_tty); } *eof = 1; done: if (offset >= count+begin) return 0; *start = buf + (offset-begin); return ((len < begin+count-offset) ? len : begin+count-offset); } #endif /* CONFIG_PROC_FS */ #ifdef MODULE MODULE_AUTHOR("Dag Brattli "); MODULE_DESCRIPTION("IrCOMM serial TTY driver"); MODULE_LICENSE("GPL"); int init_module(void) { return ircomm_tty_init(); } void cleanup_module(void) { ircomm_tty_cleanup(); } #endif /* MODULE */