#ifndef __LINUX_USB_H #define __LINUX_USB_H /* USB constants */ /* * Device and/or Interface Class codes */ #define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ #define USB_CLASS_AUDIO 1 #define USB_CLASS_COMM 2 #define USB_CLASS_HID 3 #define USB_CLASS_PHYSICAL 5 #define USB_CLASS_STILL_IMAGE 6 #define USB_CLASS_PRINTER 7 #define USB_CLASS_MASS_STORAGE 8 #define USB_CLASS_HUB 9 #define USB_CLASS_CDC_DATA 0x0a #define USB_CLASS_CSCID 0x0b /* chip+ smart card */ #define USB_CLASS_CONTENT_SEC 0x0d /* content security */ #define USB_CLASS_APP_SPEC 0xfe #define USB_CLASS_VENDOR_SPEC 0xff /* * USB types */ #define USB_TYPE_MASK (0x03 << 5) #define USB_TYPE_STANDARD (0x00 << 5) #define USB_TYPE_CLASS (0x01 << 5) #define USB_TYPE_VENDOR (0x02 << 5) #define USB_TYPE_RESERVED (0x03 << 5) /* * USB recipients */ #define USB_RECIP_MASK 0x1f #define USB_RECIP_DEVICE 0x00 #define USB_RECIP_INTERFACE 0x01 #define USB_RECIP_ENDPOINT 0x02 #define USB_RECIP_OTHER 0x03 /* * USB directions */ #define USB_DIR_OUT 0 #define USB_DIR_IN 0x80 /* * Descriptor types */ #define USB_DT_DEVICE 0x01 #define USB_DT_CONFIG 0x02 #define USB_DT_STRING 0x03 #define USB_DT_INTERFACE 0x04 #define USB_DT_ENDPOINT 0x05 #define USB_DT_HID (USB_TYPE_CLASS | 0x01) #define USB_DT_REPORT (USB_TYPE_CLASS | 0x02) #define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) #define USB_DT_HUB (USB_TYPE_CLASS | 0x09) /* * Descriptor sizes per descriptor type */ #define USB_DT_DEVICE_SIZE 18 #define USB_DT_CONFIG_SIZE 9 #define USB_DT_INTERFACE_SIZE 9 #define USB_DT_ENDPOINT_SIZE 7 #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ #define USB_DT_HUB_NONVAR_SIZE 7 #define USB_DT_HID_SIZE 9 /* * Endpoints */ #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ #define USB_ENDPOINT_DIR_MASK 0x80 #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ #define USB_ENDPOINT_XFER_CONTROL 0 #define USB_ENDPOINT_XFER_ISOC 1 #define USB_ENDPOINT_XFER_BULK 2 #define USB_ENDPOINT_XFER_INT 3 /* * USB Packet IDs (PIDs) */ #define USB_PID_UNDEF_0 0xf0 #define USB_PID_OUT 0xe1 #define USB_PID_ACK 0xd2 #define USB_PID_DATA0 0xc3 #define USB_PID_PING 0xb4 /* USB 2.0 */ #define USB_PID_SOF 0xa5 #define USB_PID_NYET 0x96 /* USB 2.0 */ #define USB_PID_DATA2 0x87 /* USB 2.0 */ #define USB_PID_SPLIT 0x78 /* USB 2.0 */ #define USB_PID_IN 0x69 #define USB_PID_NAK 0x5a #define USB_PID_DATA1 0x4b #define USB_PID_PREAMBLE 0x3c /* Token mode */ #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */ #define USB_PID_SETUP 0x2d #define USB_PID_STALL 0x1e #define USB_PID_MDATA 0x0f /* USB 2.0 */ /* * Standard requests */ #define USB_REQ_GET_STATUS 0x00 #define USB_REQ_CLEAR_FEATURE 0x01 #define USB_REQ_SET_FEATURE 0x03 #define USB_REQ_SET_ADDRESS 0x05 #define USB_REQ_GET_DESCRIPTOR 0x06 #define USB_REQ_SET_DESCRIPTOR 0x07 #define USB_REQ_GET_CONFIGURATION 0x08 #define USB_REQ_SET_CONFIGURATION 0x09 #define USB_REQ_GET_INTERFACE 0x0A #define USB_REQ_SET_INTERFACE 0x0B #define USB_REQ_SYNCH_FRAME 0x0C /* * HID requests */ #define USB_REQ_GET_REPORT 0x01 #define USB_REQ_GET_IDLE 0x02 #define USB_REQ_GET_PROTOCOL 0x03 #define USB_REQ_SET_REPORT 0x09 #define USB_REQ_SET_IDLE 0x0A #define USB_REQ_SET_PROTOCOL 0x0B #ifdef __KERNEL__ #include #include #include #include #include #include /* for in_interrupt() */ #include #include #define USB_MAJOR 180 static __inline__ void wait_ms(unsigned int ms) { if(!in_interrupt()) { current->state = TASK_UNINTERRUPTIBLE; schedule_timeout(1 + ms * HZ / 1000); } else mdelay(ms); } typedef struct { __u8 requesttype; __u8 request; __u16 value; __u16 index; __u16 length; } devrequest __attribute__ ((packed)); /* * USB-status codes: * USB_ST* maps to -E* and should go away in the future */ #define USB_ST_NOERROR 0 #define USB_ST_CRC (-EILSEQ) #define USB_ST_BITSTUFF (-EPROTO) #define USB_ST_NORESPONSE (-ETIMEDOUT) /* device not responding/handshaking */ #define USB_ST_DATAOVERRUN (-EOVERFLOW) #define USB_ST_DATAUNDERRUN (-EREMOTEIO) #define USB_ST_BUFFEROVERRUN (-ECOMM) #define USB_ST_BUFFERUNDERRUN (-ENOSR) #define USB_ST_INTERNALERROR (-EPROTO) /* unknown error */ #define USB_ST_SHORT_PACKET (-EREMOTEIO) #define USB_ST_PARTIAL_ERROR (-EXDEV) /* ISO transfer only partially completed */ #define USB_ST_URB_KILLED (-ENOENT) /* URB canceled by user */ #define USB_ST_URB_PENDING (-EINPROGRESS) #define USB_ST_REMOVED (-ENODEV) /* device not existing or removed */ #define USB_ST_TIMEOUT (-ETIMEDOUT) /* communication timed out, also in urb->status**/ #define USB_ST_NOTSUPPORTED (-ENOSYS) #define USB_ST_BANDWIDTH_ERROR (-ENOSPC) /* too much bandwidth used */ #define USB_ST_URB_INVALID_ERROR (-EINVAL) /* invalid value/transfer type */ #define USB_ST_URB_REQUEST_ERROR (-ENXIO) /* invalid endpoint */ #define USB_ST_STALL (-EPIPE) /* pipe stalled, also in urb->status*/ /* * USB device number allocation bitmap. There's one bitmap * per USB tree. */ struct usb_devmap { unsigned long devicemap[128 / (8*sizeof(unsigned long))]; }; #define USB_MAXBUS 64 struct usb_busmap { unsigned long busmap[USB_MAXBUS / (8*sizeof(unsigned long))]; }; /* * This is a USB device descriptor. * * USB device information */ /* Everything but the endpoint maximums are aribtrary */ #define USB_MAXCONFIG 8 #define USB_ALTSETTINGALLOC 4 #define USB_MAXALTSETTING 128 /* Hard limit */ #define USB_MAXINTERFACES 32 #define USB_MAXENDPOINTS 32 /* All standard descriptors have these 2 fields in common */ struct usb_descriptor_header { __u8 bLength; __u8 bDescriptorType; } __attribute__ ((packed)); /* Device descriptor */ struct usb_device_descriptor { __u8 bLength; __u8 bDescriptorType; __u16 bcdUSB; __u8 bDeviceClass; __u8 bDeviceSubClass; __u8 bDeviceProtocol; __u8 bMaxPacketSize0; __u16 idVendor; __u16 idProduct; __u16 bcdDevice; __u8 iManufacturer; __u8 iProduct; __u8 iSerialNumber; __u8 bNumConfigurations; } __attribute__ ((packed)); /* Endpoint descriptor */ struct usb_endpoint_descriptor { __u8 bLength __attribute__ ((packed)); __u8 bDescriptorType __attribute__ ((packed)); __u8 bEndpointAddress __attribute__ ((packed)); __u8 bmAttributes __attribute__ ((packed)); __u16 wMaxPacketSize __attribute__ ((packed)); __u8 bInterval __attribute__ ((packed)); __u8 bRefresh __attribute__ ((packed)); __u8 bSynchAddress __attribute__ ((packed)); unsigned char *extra; /* Extra descriptors */ int extralen; }; /* Interface descriptor */ struct usb_interface_descriptor { __u8 bLength __attribute__ ((packed)); __u8 bDescriptorType __attribute__ ((packed)); __u8 bInterfaceNumber __attribute__ ((packed)); __u8 bAlternateSetting __attribute__ ((packed)); __u8 bNumEndpoints __attribute__ ((packed)); __u8 bInterfaceClass __attribute__ ((packed)); __u8 bInterfaceSubClass __attribute__ ((packed)); __u8 bInterfaceProtocol __attribute__ ((packed)); __u8 iInterface __attribute__ ((packed)); struct usb_endpoint_descriptor *endpoint; unsigned char *extra; /* Extra descriptors */ int extralen; }; struct usb_interface { struct usb_interface_descriptor *altsetting; int act_altsetting; /* active alternate setting */ int num_altsetting; /* number of alternate settings */ int max_altsetting; /* total memory allocated */ struct usb_driver *driver; /* driver */ void *private_data; }; /* Configuration descriptor information.. */ struct usb_config_descriptor { __u8 bLength __attribute__ ((packed)); __u8 bDescriptorType __attribute__ ((packed)); __u16 wTotalLength __attribute__ ((packed)); __u8 bNumInterfaces __attribute__ ((packed)); __u8 bConfigurationValue __attribute__ ((packed)); __u8 iConfiguration __attribute__ ((packed)); __u8 bmAttributes __attribute__ ((packed)); __u8 MaxPower __attribute__ ((packed)); struct usb_interface *interface; unsigned char *extra; /* Extra descriptors */ int extralen; }; /* String descriptor */ struct usb_string_descriptor { __u8 bLength; __u8 bDescriptorType; __u16 wData[1]; } __attribute__ ((packed)); struct usb_device; /* * Device table entry for "new style" table-driven USB drivers. * User mode code can read these tables to choose which modules to load. * Declare the table as __devinitdata, and as a MODULE_DEVICE_TABLE. * * With a device table provide bind() instead of probe(). Then the * third bind() parameter will point to a matching entry from this * table. (Null value reserved.) * * Terminate the driver's table with an all-zeroes entry. * Init the fields you care about; zeroes are not used in comparisons. */ #define USB_DEVICE_ID_MATCH_VENDOR 0x0001 #define USB_DEVICE_ID_MATCH_PRODUCT 0x0002 #define USB_DEVICE_ID_MATCH_DEV_LO 0x0004 #define USB_DEVICE_ID_MATCH_DEV_HI 0x0008 #define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040 #define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200 #define USB_DEVICE_ID_MATCH_DEVICE (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) #define USB_DEVICE_ID_MATCH_DEV_RANGE (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI) #define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE) #define USB_DEVICE_ID_MATCH_DEV_INFO \ (USB_DEVICE_ID_MATCH_DEV_CLASS | USB_DEVICE_ID_MATCH_DEV_SUBCLASS | USB_DEVICE_ID_MATCH_DEV_PROTOCOL) #define USB_DEVICE_ID_MATCH_INT_INFO \ (USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS | USB_DEVICE_ID_MATCH_INT_PROTOCOL) /* Some useful macros */ #define USB_DEVICE(vend,prod) \ match_flags: USB_DEVICE_ID_MATCH_DEVICE, idVendor: (vend), idProduct: (prod) #define USB_DEVICE_VER(vend,prod,lo,hi) \ match_flags: USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, idVendor: (vend), idProduct: (prod), bcdDevice_lo: (lo), bcdDevice_hi: (hi) #define USB_DEVICE_INFO(cl,sc,pr) \ match_flags: USB_DEVICE_ID_MATCH_DEV_INFO, bDeviceClass: (cl), bDeviceSubClass: (sc), bDeviceProtocol: (pr) #define USB_INTERFACE_INFO(cl,sc,pr) \ match_flags: USB_DEVICE_ID_MATCH_INT_INFO, bInterfaceClass: (cl), bInterfaceSubClass: (sc), bInterfaceProtocol: (pr) struct usb_device_id { /* This bitmask is used to determine which of the following fields * are to be used for matching. */ __u16 match_flags; /* * vendor/product codes are checked, if vendor is nonzero * Range is for device revision (bcdDevice), inclusive; * zero values here mean range isn't considered */ __u16 idVendor; __u16 idProduct; __u16 bcdDevice_lo, bcdDevice_hi; /* * if device class != 0, these can be match criteria; * but only if this bDeviceClass value is nonzero */ __u8 bDeviceClass; __u8 bDeviceSubClass; __u8 bDeviceProtocol; /* * if interface class != 0, these can be match criteria; * but only if this bInterfaceClass value is nonzero */ __u8 bInterfaceClass; __u8 bInterfaceSubClass; __u8 bInterfaceProtocol; /* * for driver's use; not involved in driver matching. */ unsigned long driver_info; }; struct usb_driver { const char *name; void *(*probe)( struct usb_device *dev, /* the device */ unsigned intf, /* what interface */ const struct usb_device_id *id /* from id_table */ ); void (*disconnect)(struct usb_device *, void *); struct list_head driver_list; struct file_operations *fops; int minor; struct semaphore serialize; /* ioctl -- userspace apps can talk to drivers through usbdevfs */ int (*ioctl)(struct usb_device *dev, unsigned int code, void *buf); /* support for "new-style" USB hotplugging * binding policy can be driven from user mode too */ const struct usb_device_id *id_table; /* suspend before the bus suspends; * disconnect or resume when the bus resumes */ // void (*suspend)(struct usb_device *dev); // void (*resume)(struct usb_device *dev); }; /*----------------------------------------------------------------------------* * New USB Structures * *----------------------------------------------------------------------------*/ /* * urb->transfer_flags: */ #define USB_DISABLE_SPD 0x0001 #define USB_ISO_ASAP 0x0002 #define USB_ASYNC_UNLINK 0x0008 #define USB_QUEUE_BULK 0x0010 #define USB_NO_FSBR 0x0020 #define USB_ZERO_PACKET 0x0040 // Finish bulk OUTs always with zero length packet #define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */ /* ... less overhead for QUEUE_BULK */ #define USB_TIMEOUT_KILLED 0x1000 // only set by HCD! typedef struct { unsigned int offset; unsigned int length; // expected length unsigned int actual_length; unsigned int status; } iso_packet_descriptor_t, *piso_packet_descriptor_t; struct urb; typedef void (*usb_complete_t)(struct urb *); typedef struct urb { spinlock_t lock; // lock for the URB void *hcpriv; // private data for host controller struct list_head urb_list; // list pointer to all active urbs struct urb *next; // pointer to next URB struct usb_device *dev; // pointer to associated USB device unsigned int pipe; // pipe information int status; // returned status unsigned int transfer_flags; // USB_DISABLE_SPD | USB_ISO_ASAP | etc. void *transfer_buffer; // associated data buffer int transfer_buffer_length; // data buffer length int actual_length; // actual data buffer length int bandwidth; // bandwidth for this transfer request (INT or ISO) unsigned char *setup_packet; // setup packet (control only) // int start_frame; // start frame (iso/irq only) int number_of_packets; // number of packets in this request (iso) int interval; // polling interval (irq only) int error_count; // number of errors in this transfer (iso only) int timeout; // timeout (in jiffies) // void *context; // context for completion routine usb_complete_t complete; // pointer to completion routine // iso_packet_descriptor_t iso_frame_desc[0]; } urb_t, *purb_t; /** * FILL_CONTROL_URB - macro to help initialize a control urb * @URB: pointer to the urb to initialize. * @DEV: pointer to the struct usb_device for this urb. * @PIPE: the endpoint pipe * @SETUP_PACKET: pointer to the setup_packet buffer * @TRANSFER_BUFFER: pointer to the transfer buffer * @BUFFER_LENGTH: length of the transfer buffer * @COMPLETE: pointer to the usb_complete_t function * @CONTEXT: what to set the urb context to. * * Initializes a control urb with the proper information needed to submit * it to a device. This macro is depreciated, the usb_fill_control_urb() * function should be used instead. */ #define FILL_CONTROL_URB(URB,DEV,PIPE,SETUP_PACKET,TRANSFER_BUFFER,BUFFER_LENGTH,COMPLETE,CONTEXT) \ do {\ spin_lock_init(&(URB)->lock);\ (URB)->dev=DEV;\ (URB)->pipe=PIPE;\ (URB)->setup_packet=SETUP_PACKET;\ (URB)->transfer_buffer=TRANSFER_BUFFER;\ (URB)->transfer_buffer_length=BUFFER_LENGTH;\ (URB)->complete=COMPLETE;\ (URB)->context=CONTEXT;\ } while (0) /** * FILL_BULK_URB - macro to help initialize a bulk urb * @URB: pointer to the urb to initialize. * @DEV: pointer to the struct usb_device for this urb. * @PIPE: the endpoint pipe * @TRANSFER_BUFFER: pointer to the transfer buffer * @BUFFER_LENGTH: length of the transfer buffer * @COMPLETE: pointer to the usb_complete_t function * @CONTEXT: what to set the urb context to. * * Initializes a bulk urb with the proper information needed to submit it * to a device. This macro is depreciated, the usb_fill_bulk_urb() * function should be used instead. */ #define FILL_BULK_URB(URB,DEV,PIPE,TRANSFER_BUFFER,BUFFER_LENGTH,COMPLETE,CONTEXT) \ do {\ spin_lock_init(&(URB)->lock);\ (URB)->dev=DEV;\ (URB)->pipe=PIPE;\ (URB)->transfer_buffer=TRANSFER_BUFFER;\ (URB)->transfer_buffer_length=BUFFER_LENGTH;\ (URB)->complete=COMPLETE;\ (URB)->context=CONTEXT;\ } while (0) /** * FILL_INT_URB - macro to help initialize a interrupt urb * @URB: pointer to the urb to initialize. * @DEV: pointer to the struct usb_device for this urb. * @PIPE: the endpoint pipe * @TRANSFER_BUFFER: pointer to the transfer buffer * @BUFFER_LENGTH: length of the transfer buffer * @COMPLETE: pointer to the usb_complete_t function * @CONTEXT: what to set the urb context to. * @INTERVAL: what to set the urb interval to. * * Initializes a interrupt urb with the proper information needed to submit * it to a device. This macro is depreciated, the usb_fill_int_urb() * function should be used instead. */ #define FILL_INT_URB(URB,DEV,PIPE,TRANSFER_BUFFER,BUFFER_LENGTH,COMPLETE,CONTEXT,INTERVAL) \ do {\ spin_lock_init(&(URB)->lock);\ (URB)->dev=DEV;\ (URB)->pipe=PIPE;\ (URB)->transfer_buffer=TRANSFER_BUFFER;\ (URB)->transfer_buffer_length=BUFFER_LENGTH;\ (URB)->complete=COMPLETE;\ (URB)->context=CONTEXT;\ (URB)->interval=INTERVAL;\ (URB)->start_frame=-1;\ } while (0) #define FILL_CONTROL_URB_TO(a,aa,b,c,d,e,f,g,h) \ do {\ spin_lock_init(&(a)->lock);\ (a)->dev=aa;\ (a)->pipe=b;\ (a)->setup_packet=c;\ (a)->transfer_buffer=d;\ (a)->transfer_buffer_length=e;\ (a)->complete=f;\ (a)->context=g;\ (a)->timeout=h;\ } while (0) #define FILL_BULK_URB_TO(a,aa,b,c,d,e,f,g) \ do {\ spin_lock_init(&(a)->lock);\ (a)->dev=aa;\ (a)->pipe=b;\ (a)->transfer_buffer=c;\ (a)->transfer_buffer_length=d;\ (a)->complete=e;\ (a)->context=f;\ (a)->timeout=g;\ } while (0) /** * usb_fill_control_urb - initializes a control urb * @urb: pointer to the urb to initialize. * @dev: pointer to the struct usb_device for this urb. * @pipe: the endpoint pipe * @setup_packet: pointer to the setup_packet buffer * @transfer_buffer: pointer to the transfer buffer * @buffer_length: length of the transfer buffer * @complete: pointer to the usb_complete_t function * @context: what to set the urb context to. * * Initializes a control urb with the proper information needed to submit * it to a device. */ static inline void usb_fill_control_urb (struct urb *urb, struct usb_device *dev, unsigned int pipe, unsigned char *setup_packet, void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context) { spin_lock_init(&urb->lock); urb->dev = dev; urb->pipe = pipe; urb->setup_packet = setup_packet; urb->transfer_buffer = transfer_buffer; urb->transfer_buffer_length = buffer_length; urb->complete = complete; urb->context = context; } /** * usb_fill_bulk_urb - macro to help initialize a bulk urb * @urb: pointer to the urb to initialize. * @dev: pointer to the struct usb_device for this urb. * @pipe: the endpoint pipe * @transfer_buffer: pointer to the transfer buffer * @buffer_length: length of the transfer buffer * @complete: pointer to the usb_complete_t function * @context: what to set the urb context to. * * Initializes a bulk urb with the proper information needed to submit it * to a device. */ static inline void usb_fill_bulk_urb (struct urb *urb, struct usb_device *dev, unsigned int pipe, void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context) { spin_lock_init(&urb->lock); urb->dev = dev; urb->pipe = pipe; urb->transfer_buffer = transfer_buffer; urb->transfer_buffer_length = buffer_length; urb->complete = complete; urb->context = context; } /** * usb_fill_int_urb - macro to help initialize a interrupt urb * @urb: pointer to the urb to initialize. * @dev: pointer to the struct usb_device for this urb. * @pipe: the endpoint pipe * @transfer_buffer: pointer to the transfer buffer * @buffer_length: length of the transfer buffer * @complete: pointer to the usb_complete_t function * @context: what to set the urb context to. * @interval: what to set the urb interval to. * * Initializes a interrupt urb with the proper information needed to submit * it to a device. */ static inline void usb_fill_int_urb (struct urb *urb, struct usb_device *dev, unsigned int pipe, void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context, int interval) { spin_lock_init(&urb->lock); urb->dev = dev; urb->pipe = pipe; urb->transfer_buffer = transfer_buffer; urb->transfer_buffer_length = buffer_length; urb->complete = complete; urb->context = context; urb->interval = interval; urb->start_frame = -1; } purb_t usb_alloc_urb(int iso_packets); void usb_free_urb (purb_t purb); int usb_submit_urb(purb_t purb); int usb_unlink_urb(purb_t purb); int usb_internal_control_msg(struct usb_device *usb_dev, unsigned int pipe, devrequest *cmd, void *data, int len, int timeout); int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout); /*-------------------------------------------------------------------* * SYNCHRONOUS CALL SUPPORT * *-------------------------------------------------------------------*/ struct usb_api_data { wait_queue_head_t wqh; int done; /* void* stuff; */ /* Possible extension later. */ }; /* -------------------------------------------------------------------------- */ struct usb_operations { int (*allocate)(struct usb_device *); int (*deallocate)(struct usb_device *); int (*get_frame_number) (struct usb_device *usb_dev); int (*submit_urb) (struct urb* purb); int (*unlink_urb) (struct urb* purb); }; #define DEVNUM_ROUND_ROBIN /***** OPTION *****/ /* * Allocated per bus we have */ struct usb_bus { int busnum; /* Bus number (in order of reg) */ #ifdef DEVNUM_ROUND_ROBIN int devnum_next; /* Next open device number in round-robin allocation */ #endif /* DEVNUM_ROUND_ROBIN */ struct usb_devmap devmap; /* Device map */ struct usb_operations *op; /* Operations (specific to the HC) */ struct usb_device *root_hub; /* Root hub */ struct list_head bus_list; void *hcpriv; /* Host Controller private data */ int bandwidth_allocated; /* on this Host Controller; */ /* applies to Int. and Isoc. pipes; */ /* measured in microseconds/frame; */ /* range is 0..900, where 900 = */ /* 90% of a 1-millisecond frame */ int bandwidth_int_reqs; /* number of Interrupt requesters */ int bandwidth_isoc_reqs; /* number of Isoc. requesters */ /* usbdevfs inode list */ struct list_head inodes; atomic_t refcnt; }; /* * As of USB 2.0, full/low speed devices are segregated into trees. * One type grows from USB 1.1 host controllers (OHCI, UHCI etc). * The other type grows from high speed hubs when they connect to * full/low speed devices using "Transaction Translators" (TTs). * * TTs should only be known to the hub driver, and high speed bus * drivers (only EHCI for now). They affect periodic scheduling and * sometimes control/bulk error recovery. */ struct usb_tt { struct usb_device *hub; /* upstream highspeed hub */ int multi; /* true means one TT per port */ }; /* This is arbitrary. * From USB 2.0 spec Table 11-13, offset 7, a hub can * have up to 255 ports. The most yet reported is 10. */ #define USB_MAXCHILDREN (16) struct usb_device { int devnum; /* Device number on USB bus */ enum { USB_SPEED_UNKNOWN = 0, /* enumerating */ USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ USB_SPEED_HIGH /* usb 2.0 */ } speed; struct usb_tt *tt; /* low/full speed dev, highspeed hub */ int ttport; /* device port on that tt hub */ atomic_t refcnt; /* Reference count */ struct semaphore serialize; unsigned int toggle[2]; /* one bit for each endpoint ([0] = IN, [1] = OUT) */ unsigned int halted[2]; /* endpoint halts; one bit per endpoint # & direction; */ /* [0] = IN, [1] = OUT */ int epmaxpacketin[16]; /* INput endpoint specific maximums */ int epmaxpacketout[16]; /* OUTput endpoint specific maximums */ struct usb_device *parent; struct usb_bus *bus; /* Bus we're part of */ struct usb_device_descriptor descriptor;/* Descriptor */ struct usb_config_descriptor *config; /* All of the configs */ struct usb_config_descriptor *actconfig;/* the active configuration */ char **rawdescriptors; /* Raw descriptors for each config */ int have_langid; /* whether string_langid is valid yet */ int string_langid; /* language ID for strings */ void *hcpriv; /* Host Controller private data */ /* usbdevfs inode list */ struct list_head inodes; struct list_head filelist; /* * Child devices - these can be either new devices * (if this is a hub device), or different instances * of this same device. * * Each instance needs its own set of data structures. */ int maxchild; /* Number of ports if hub */ struct usb_device *children[USB_MAXCHILDREN]; }; extern struct usb_interface *usb_ifnum_to_if(struct usb_device *dev, unsigned ifnum); extern struct usb_endpoint_descriptor *usb_epnum_to_ep_desc(struct usb_device *dev, unsigned epnum); extern int usb_register(struct usb_driver *); extern void usb_deregister(struct usb_driver *); extern void usb_scan_devices(void); /* used these for multi-interface device registration */ extern void usb_driver_claim_interface(struct usb_driver *driver, struct usb_interface *iface, void* priv); extern int usb_interface_claimed(struct usb_interface *iface); extern void usb_driver_release_interface(struct usb_driver *driver, struct usb_interface *iface); const struct usb_device_id *usb_match_id(struct usb_device *dev, struct usb_interface *interface, const struct usb_device_id *id); extern struct usb_bus *usb_alloc_bus(struct usb_operations *); extern void usb_free_bus(struct usb_bus *); extern void usb_register_bus(struct usb_bus *); extern void usb_deregister_bus(struct usb_bus *); extern struct usb_device *usb_alloc_dev(struct usb_device *parent, struct usb_bus *); extern void usb_free_dev(struct usb_device *); extern void usb_inc_dev_use(struct usb_device *); #define usb_dec_dev_use usb_free_dev extern int usb_check_bandwidth (struct usb_device *dev, struct urb *urb); extern void usb_claim_bandwidth (struct usb_device *dev, struct urb *urb, int bustime, int isoc); extern void usb_release_bandwidth(struct usb_device *dev, struct urb *urb, int isoc); extern int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype, __u16 value, __u16 index, void *data, __u16 size, int timeout); extern int usb_root_hub_string(int id, int serial, char *type, __u8 *data, int len); extern void usb_connect(struct usb_device *dev); extern void usb_disconnect(struct usb_device **); extern void usb_destroy_configuration(struct usb_device *dev); int usb_get_current_frame_number (struct usb_device *usb_dev); /* * Calling this entity a "pipe" is glorifying it. A USB pipe * is something embarrassingly simple: it basically consists * of the following information: * - device number (7 bits) * - endpoint number (4 bits) * - current Data0/1 state (1 bit) * - direction (1 bit) * - speed (1 bit) * - max packet size (2 bits: 8, 16, 32 or 64) [Historical; now gone.] * - pipe type (2 bits: control, interrupt, bulk, isochronous) * * That's 18 bits. Really. Nothing more. And the USB people have * documented these eighteen bits as some kind of glorious * virtual data structure. * * Let's not fall in that trap. We'll just encode it as a simple * unsigned int. The encoding is: * * - max size: bits 0-1 (00 = 8, 01 = 16, 10 = 32, 11 = 64) [Historical; now gone.] * - direction: bit 7 (0 = Host-to-Device [Out], 1 = Device-to-Host [In]) * - device: bits 8-14 * - endpoint: bits 15-18 * - Data0/1: bit 19 * - speed: bit 26 (0 = Full, 1 = Low Speed) * - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt, 10 = control, 11 = bulk) * * Why? Because it's arbitrary, and whatever encoding we select is really * up to us. This one happens to share a lot of bit positions with the UHCI * specification, so that much of the uhci driver can just mask the bits * appropriately. * * NOTE: there's no encoding (yet?) for a "high speed" endpoint; treat them * like full speed devices. */ #define PIPE_ISOCHRONOUS 0 #define PIPE_INTERRUPT 1 #define PIPE_CONTROL 2 #define PIPE_BULK 3 #define usb_maxpacket(dev, pipe, out) (out \ ? (dev)->epmaxpacketout[usb_pipeendpoint(pipe)] \ : (dev)->epmaxpacketin [usb_pipeendpoint(pipe)] ) #define usb_packetid(pipe) (((pipe) & USB_DIR_IN) ? USB_PID_IN : USB_PID_OUT) #define usb_pipeout(pipe) ((((pipe) >> 7) & 1) ^ 1) #define usb_pipein(pipe) (((pipe) >> 7) & 1) #define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f) #define usb_pipe_endpdev(pipe) (((pipe) >> 8) & 0x7ff) #define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf) #define usb_pipedata(pipe) (((pipe) >> 19) & 1) #define usb_pipeslow(pipe) (((pipe) >> 26) & 1) #define usb_pipetype(pipe) (((pipe) >> 30) & 3) #define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS) #define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT) #define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL) #define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK) #define PIPE_DEVEP_MASK 0x0007ff00 /* The D0/D1 toggle bits */ #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> ep) & 1) #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << ep)) #define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << ep)) | ((bit) << ep)) /* Endpoint halt control/status */ #define usb_endpoint_out(ep_dir) (((ep_dir >> 7) & 1) ^ 1) #define usb_endpoint_halt(dev, ep, out) ((dev)->halted[out] |= (1 << (ep))) #define usb_endpoint_running(dev, ep, out) ((dev)->halted[out] &= ~(1 << (ep))) #define usb_endpoint_halted(dev, ep, out) ((dev)->halted[out] & (1 << (ep))) static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint) { return (dev->devnum << 8) | (endpoint << 15) | ((dev->speed == USB_SPEED_LOW) << 26); } static inline unsigned int __default_pipe(struct usb_device *dev) { return ((dev->speed == USB_SPEED_LOW) << 26); } /* Create various pipes... */ #define usb_sndctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint)) #define usb_rcvctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) #define usb_sndisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint)) #define usb_rcvisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) #define usb_sndbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint)) #define usb_rcvbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) #define usb_sndintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint)) #define usb_rcvintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) #define usb_snddefctrl(dev) ((PIPE_CONTROL << 30) | __default_pipe(dev)) #define usb_rcvdefctrl(dev) ((PIPE_CONTROL << 30) | __default_pipe(dev) | USB_DIR_IN) /* * Send and receive control messages.. */ int usb_new_device(struct usb_device *dev); int usb_reset_device(struct usb_device *dev); int usb_set_address(struct usb_device *dev); int usb_get_descriptor(struct usb_device *dev, unsigned char desctype, unsigned char descindex, void *buf, int size); int usb_get_class_descriptor(struct usb_device *dev, int ifnum, unsigned char desctype, unsigned char descindex, void *buf, int size); int usb_get_device_descriptor(struct usb_device *dev); int __usb_get_extra_descriptor(char *buffer, unsigned size, unsigned char type, void **ptr); int usb_get_status(struct usb_device *dev, int type, int target, void *data); int usb_get_configuration(struct usb_device *dev); int usb_get_protocol(struct usb_device *dev, int ifnum); int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol); int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); int usb_set_idle(struct usb_device *dev, int ifnum, int duration, int report_id); int usb_set_configuration(struct usb_device *dev, int configuration); int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type, unsigned char id, void *buf, int size); int usb_set_report(struct usb_device *dev, int ifnum, unsigned char type, unsigned char id, void *buf, int size); int usb_string(struct usb_device *dev, int index, char *buf, size_t size); int usb_clear_halt(struct usb_device *dev, int pipe); void usb_set_maxpacket(struct usb_device *dev); #define usb_get_extra_descriptor(ifpoint,type,ptr)\ __usb_get_extra_descriptor((ifpoint)->extra,(ifpoint)->extralen,type,(void**)ptr) /* * Some USB bandwidth allocation constants. */ #define BW_HOST_DELAY 1000L /* nanoseconds */ #define BW_HUB_LS_SETUP 333L /* nanoseconds */ /* 4 full-speed bit times (est.) */ #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */ #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L) #define FRAME_TIME_USECS 1000L #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L) #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */ /* Trying not to use worst-case bit-stuffing of (7/6 * 8 * bytecount) = 9.33 * bytecount */ /* bytecount = data payload byte count */ #define NS_TO_US(ns) ((ns + 500L) / 1000L) /* convert & round nanoseconds to microseconds */ /* * Debugging helpers.. */ void usb_show_device_descriptor(struct usb_device_descriptor *); void usb_show_config_descriptor(struct usb_config_descriptor *); void usb_show_interface_descriptor(struct usb_interface_descriptor *); void usb_show_endpoint_descriptor(struct usb_endpoint_descriptor *); void usb_show_device(struct usb_device *); void usb_show_string(struct usb_device *dev, char *id, int index); #ifdef DEBUG #define dbg(format, arg...) printk(KERN_DEBUG __FILE__ ": " format "\n" , ## arg) #else #define dbg(format, arg...) do {} while (0) #endif #define err(format, arg...) printk(KERN_ERR __FILE__ ": " format "\n" , ## arg) #define info(format, arg...) printk(KERN_INFO __FILE__ ": " format "\n" , ## arg) #define warn(format, arg...) printk(KERN_WARNING __FILE__ ": " format "\n" , ## arg) /* * bus and driver list */ extern struct list_head usb_driver_list; extern struct list_head usb_bus_list; extern struct semaphore usb_bus_list_lock; /* * USB device fs stuff */ #ifdef CONFIG_USB_DEVICEFS /* * these are expected to be called from the USB core/hub thread * with the kernel lock held */ extern void usbdevfs_add_bus(struct usb_bus *bus); extern void usbdevfs_remove_bus(struct usb_bus *bus); extern void usbdevfs_add_device(struct usb_device *dev); extern void usbdevfs_remove_device(struct usb_device *dev); extern int usbdevfs_init(void); extern void usbdevfs_cleanup(void); #else /* CONFIG_USB_DEVICEFS */ static inline void usbdevfs_add_bus(struct usb_bus *bus) {} static inline void usbdevfs_remove_bus(struct usb_bus *bus) {} static inline void usbdevfs_add_device(struct usb_device *dev) {} static inline void usbdevfs_remove_device(struct usb_device *dev) {} static inline int usbdevfs_init(void) { return 0; } static inline void usbdevfs_cleanup(void) { } #endif /* CONFIG_USB_DEVICEFS */ #endif /* __KERNEL__ */ #endif