/* ------------------------------------------------------------------------- */ /* */ /* i2c.h - definitions for the i2c-bus interface */ /* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-2000 Simon G. Vogl This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki and Frodo Looijaard */ /* $Id: i2c.h,v 1.46 2001/08/31 00:04:07 phil Exp $ */ #ifndef I2C_H #define I2C_H #define I2C_DATE "20010830" #define I2C_VERSION "2.6.1" #include /* id values of adapters et. al. */ #include struct i2c_msg; #ifdef __KERNEL__ /* --- Includes and compatibility declarations ------------------------ */ #include #ifndef KERNEL_VERSION #define KERNEL_VERSION(a,b,c) (((a) << 16) | ((b) << 8) | (c)) #endif #include /* for 2.2.xx */ #if LINUX_VERSION_CODE < KERNEL_VERSION(2,0,25) #include #else #include #endif #include /* --- General options ------------------------------------------------ */ #define I2C_ALGO_MAX 4 /* control memory consumption */ #define I2C_ADAP_MAX 16 #define I2C_DRIVER_MAX 16 #define I2C_CLIENT_MAX 32 #define I2C_DUMMY_MAX 4 struct i2c_algorithm; struct i2c_adapter; struct i2c_client; struct i2c_driver; struct i2c_client_address_data; union i2c_smbus_data; /* * The master routines are the ones normally used to transmit data to devices * on a bus (or read from them). Apart from two basic transfer functions to * transmit one message at a time, a more complex version can be used to * transmit an arbitrary number of messages without interruption. */ extern int i2c_master_send(struct i2c_client *,const char* ,int); extern int i2c_master_recv(struct i2c_client *,char* ,int); /* Transfer num messages. */ extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],int num); /* * Some adapter types (i.e. PCF 8584 based ones) may support slave behaviuor. * This is not tested/implemented yet and will change in the future. */ extern int i2c_slave_send(struct i2c_client *,char*,int); extern int i2c_slave_recv(struct i2c_client *,char*,int); /* This is the very generalized SMBus access routine. You probably do not want to use this, though; one of the functions below may be much easier, and probably just as fast. Note that we use i2c_adapter here, because you do not need a specific smbus adapter to call this function. */ extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); /* Now follow the 'nice' access routines. These also document the calling conventions of smbus_access. */ extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte(struct i2c_client * client); extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command); extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, u8 command, u8 value); extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command); extern s32 i2c_smbus_write_word_data(struct i2c_client * client, u8 command, u16 value); extern s32 i2c_smbus_process_call(struct i2c_client * client, u8 command, u16 value); /* Returns the number of read bytes */ extern s32 i2c_smbus_read_block_data(struct i2c_client * client, u8 command, u8 *values); extern s32 i2c_smbus_write_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); /* * A driver is capable of handling one or more physical devices present on * I2C adapters. This information is used to inform the driver of adapter * events. */ struct i2c_driver { char name[32]; int id; unsigned int flags; /* div., see below */ /* Notifies the driver that a new bus has appeared. This routine * can be used by the driver to test if the bus meets its conditions * & seek for the presence of the chip(s) it supports. If found, it * registers the client(s) that are on the bus to the i2c admin. via * i2c_attach_client. */ int (*attach_adapter)(struct i2c_adapter *); /* tells the driver that a client is about to be deleted & gives it * the chance to remove its private data. Also, if the client struct * has been dynamically allocated by the driver in the function above, * it must be freed here. */ int (*detach_client)(struct i2c_client *); /* a ioctl like command that can be used to perform specific functions * with the device. */ int (*command)(struct i2c_client *client,unsigned int cmd, void *arg); /* These two are mainly used for bookkeeping & dynamic unloading of * kernel modules. inc_use tells the driver that a client is being * used by another module & that it should increase its ref. counter. * dec_use is the inverse operation. * NB: Make sure you have no circular dependencies, or else you get a * deadlock when trying to unload the modules. * You should use the i2c_{inc,dec}_use_client functions instead of * calling this function directly. */ void (*inc_use)(struct i2c_client *client); void (*dec_use)(struct i2c_client *client); }; /* * i2c_client identifies a single device (i.e. chip) that is connected to an * i2c bus. The behaviour is defined by the routines of the driver. This * function is mainly used for lookup & other admin. functions. */ struct i2c_client { char name[32]; int id; unsigned int flags; /* div., see below */ unsigned int addr; /* chip address - NOTE: 7bit */ /* addresses are stored in the */ /* _LOWER_ 7 bits of this char */ /* addr: unsigned int to make lm_sensors i2c-isa adapter work more cleanly. It does not take any more memory space, due to alignment considerations */ struct i2c_adapter *adapter; /* the adapter we sit on */ struct i2c_driver *driver; /* and our access routines */ void *data; /* for the clients */ int usage_count; /* How many accesses currently */ /* to the client */ }; /* * The following structs are for those who like to implement new bus drivers: * i2c_algorithm is the interface to a class of hardware solutions which can * be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584 * to name two of the most common. */ struct i2c_algorithm { char name[32]; /* textual description */ unsigned int id; /* If an adapter algorithm can't to I2C-level access, set master_xfer to NULL. If an adapter algorithm can do SMBus access, set smbus_xfer. If set to NULL, the SMBus protocol is simulated using common I2C messages */ int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg msgs[], int num); int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); /* --- these optional/future use for some adapter types.*/ int (*slave_send)(struct i2c_adapter *,char*,int); int (*slave_recv)(struct i2c_adapter *,char*,int); /* --- ioctl like call to set div. parameters. */ int (*algo_control)(struct i2c_adapter *, unsigned int, unsigned long); /* To determine what the adapter supports */ u32 (*functionality) (struct i2c_adapter *); }; #if LINUX_VERSION_CODE < KERNEL_VERSION(2,1,29) struct proc_dir_entry; #endif /* * i2c_adapter is the structure used to identify a physical i2c bus along * with the access algorithms necessary to access it. */ struct i2c_adapter { char name[32]; /* some useful name to identify the adapter */ unsigned int id;/* == is algo->id | hwdep.struct->id, */ /* for registered values see below */ struct i2c_algorithm *algo;/* the algorithm to access the bus */ void *algo_data; /* --- These may be NULL, but should increase the module use count */ void (*inc_use)(struct i2c_adapter *); void (*dec_use)(struct i2c_adapter *); /* --- administration stuff. */ int (*client_register)(struct i2c_client *); int (*client_unregister)(struct i2c_client *); void *data; /* private data for the adapter */ /* some data fields that are used by all types */ /* these data fields are readonly to the public */ /* and can be set via the i2c_ioctl call */ /* data fields that are valid for all devices */ struct semaphore lock; unsigned int flags;/* flags specifying div. data */ struct i2c_client *clients[I2C_CLIENT_MAX]; int client_count; int timeout; int retries; #ifdef CONFIG_PROC_FS /* No need to set this when you initialize the adapter */ int inode; #if LINUX_VERSION_CODE < KERNEL_VERSION(2,1,29) struct proc_dir_entry *proc_entry; #endif #endif /* def CONFIG_PROC_FS */ }; /*flags for the driver struct: */ #define I2C_DF_NOTIFY 0x01 /* notify on bus (de/a)ttaches */ #define I2C_DF_DUMMY 0x02 /* do not connect any clients */ /*flags for the client struct: */ #define I2C_CLIENT_ALLOW_USE 0x01 /* Client allows access */ #define I2C_CLIENT_ALLOW_MULTIPLE_USE 0x02 /* Allow multiple access-locks */ /* on an i2c_client */ /* i2c_client_address_data is the struct for holding default client * addresses for a driver and for the parameters supplied on the * command line */ struct i2c_client_address_data { unsigned short *normal_i2c; unsigned short *normal_i2c_range; unsigned short *probe; unsigned short *probe_range; unsigned short *ignore; unsigned short *ignore_range; unsigned short *force; }; /* Internal numbers to terminate lists */ #define I2C_CLIENT_END 0xfffe /* The numbers to use to set I2C bus address */ #define ANY_I2C_BUS 0xffff /* The length of the option lists */ #define I2C_CLIENT_MAX_OPTS 48 /* ----- functions exported by i2c.o */ /* administration... */ extern int i2c_add_adapter(struct i2c_adapter *); extern int i2c_del_adapter(struct i2c_adapter *); extern int i2c_add_driver(struct i2c_driver *); extern int i2c_del_driver(struct i2c_driver *); extern int i2c_attach_client(struct i2c_client *); extern int i2c_detach_client(struct i2c_client *); /* Only call these if you grab a resource that makes unloading the client and the adapter it is on completely impossible. Like when a /proc directory is entered. */ extern void i2c_inc_use_client(struct i2c_client *); extern void i2c_dec_use_client(struct i2c_client *); /* New function: This is to get an i2c_client-struct for controlling the client either by using i2c_control-function or having the client-module export functions that can be used with the i2c_client -struct. */ extern struct i2c_client *i2c_get_client(int driver_id, int adapter_id, struct i2c_client *prev); /* Should be used with new function extern struct i2c_client *i2c_get_client(int,int,struct i2c_client *); to make sure that client-struct is valid and that it is okay to access the i2c-client. returns -EACCES if client doesn't allow use (default) returns -EBUSY if client doesn't allow multiple use (default) and usage_count >0 */ extern int i2c_use_client(struct i2c_client *); extern int i2c_release_client(struct i2c_client *); /* returns -EBUSY if address has been taken, 0 if not. Note that the only other place at which this is called is within i2c_attach_client; so you can cheat by simply not registering. Not recommended, of course! */ extern int i2c_check_addr (struct i2c_adapter *adapter, int addr); /* Detect function. It iterates over all possible addresses itself. * It will only call found_proc if some client is connected at the * specific address (unless a 'force' matched); */ typedef int i2c_client_found_addr_proc (struct i2c_adapter *adapter, int addr, unsigned short flags,int kind); extern int i2c_probe(struct i2c_adapter *adapter, struct i2c_client_address_data *address_data, i2c_client_found_addr_proc *found_proc); /* An ioctl like call to set div. parameters of the adapter. */ extern int i2c_control(struct i2c_client *,unsigned int, unsigned long); /* This call returns a unique low identifier for each registered adapter, * or -1 if the adapter was not registered. */ extern int i2c_adapter_id(struct i2c_adapter *adap); /* Return the functionality mask */ extern u32 i2c_get_functionality (struct i2c_adapter *adap); /* Return 1 if adapter supports everything we need, 0 if not. */ extern int i2c_check_functionality (struct i2c_adapter *adap, u32 func); #endif /* __KERNEL__ */ /* * I2C Message - used for pure i2c transaction, also from /dev interface */ struct i2c_msg { __u16 addr; /* slave address */ unsigned short flags; #define I2C_M_TEN 0x10 /* we have a ten bit chip address */ #define I2C_M_RD 0x01 #define I2C_M_NOSTART 0x4000 #define I2C_M_REV_DIR_ADDR 0x2000 short len; /* msg length */ char *buf; /* pointer to msg data */ }; /* To determine what functionality is present */ #define I2C_FUNC_I2C 0x00000001 #define I2C_FUNC_10BIT_ADDR 0x00000002 #define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART} */ #define I2C_FUNC_SMBUS_QUICK 0x00010000 #define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 #define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 #define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 #define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 #define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 #define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 #define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 #define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 #define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* New I2C-like block */ #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* transfer */ #define I2C_FUNC_SMBUS_BYTE I2C_FUNC_SMBUS_READ_BYTE | \ I2C_FUNC_SMBUS_WRITE_BYTE #define I2C_FUNC_SMBUS_BYTE_DATA I2C_FUNC_SMBUS_READ_BYTE_DATA | \ I2C_FUNC_SMBUS_WRITE_BYTE_DATA #define I2C_FUNC_SMBUS_WORD_DATA I2C_FUNC_SMBUS_READ_WORD_DATA | \ I2C_FUNC_SMBUS_WRITE_WORD_DATA #define I2C_FUNC_SMBUS_BLOCK_DATA I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA #define I2C_FUNC_SMBUS_I2C_BLOCK I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK #define I2C_FUNC_SMBUS_EMUL I2C_FUNC_SMBUS_QUICK | \ I2C_FUNC_SMBUS_BYTE | \ I2C_FUNC_SMBUS_BYTE_DATA | \ I2C_FUNC_SMBUS_WORD_DATA | \ I2C_FUNC_SMBUS_PROC_CALL | \ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA /* * Data for SMBus Messages */ union i2c_smbus_data { __u8 byte; __u16 word; __u8 block[33]; /* block[0] is used for length */ }; /* smbus_access read or write markers */ #define I2C_SMBUS_READ 1 #define I2C_SMBUS_WRITE 0 /* SMBus transaction types (size parameter in the above functions) Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ #define I2C_SMBUS_QUICK 0 #define I2C_SMBUS_BYTE 1 #define I2C_SMBUS_BYTE_DATA 2 #define I2C_SMBUS_WORD_DATA 3 #define I2C_SMBUS_PROC_CALL 4 #define I2C_SMBUS_BLOCK_DATA 5 #define I2C_SMBUS_I2C_BLOCK_DATA 6 /* ----- commands for the ioctl like i2c_command call: * note that additional calls are defined in the algorithm and hw * dependent layers - these can be listed here, or see the * corresponding header files. */ /* -> bit-adapter specific ioctls */ #define I2C_RETRIES 0x0701 /* number of times a device address */ /* should be polled when not */ /* acknowledging */ #define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ /* this is for i2c-dev.c */ #define I2C_SLAVE 0x0703 /* Change slave address */ /* Attn.: Slave address is 7 or 10 bits */ #define I2C_SLAVE_FORCE 0x0706 /* Change slave address */ /* Attn.: Slave address is 7 or 10 bits */ /* This changes the address, even if it */ /* is already taken! */ #define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ #define I2C_FUNCS 0x0705 /* Get the adapter functionality */ #define I2C_RDWR 0x0707 /* Combined R/W transfer (one stop only)*/ #if 0 #define I2C_ACK_TEST 0x0710 /* See if a slave is at a specific address */ #endif #define I2C_SMBUS 0x0720 /* SMBus-level access */ /* ... algo-bit.c recognizes */ #define I2C_UDELAY 0x0705 /* set delay in microsecs between each */ /* written byte (except address) */ #define I2C_MDELAY 0x0706 /* millisec delay between written bytes */ /* ----- I2C-DEV: char device interface stuff ------------------------- */ #define I2C_MAJOR 89 /* Device major number */ #ifdef __KERNEL__ # ifndef NULL # define NULL ( (void *) 0 ) # endif # ifndef ENODEV # include # endif /* These defines are used for probing i2c client addresses */ /* Default fill of many variables */ #define I2C_CLIENT_DEFAULTS {I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END} /* This is ugly. We need to evaluate I2C_CLIENT_MAX_OPTS before it is stringified */ #define I2C_CLIENT_MODPARM_AUX1(x) "1-" #x "h" #define I2C_CLIENT_MODPARM_AUX(x) I2C_CLIENT_MODPARM_AUX1(x) #define I2C_CLIENT_MODPARM I2C_CLIENT_MODPARM_AUX(I2C_CLIENT_MAX_OPTS) /* I2C_CLIENT_MODULE_PARM creates a module parameter, and puts it in the module header */ #define I2C_CLIENT_MODULE_PARM(var,desc) \ static unsigned short var[I2C_CLIENT_MAX_OPTS] = I2C_CLIENT_DEFAULTS; \ MODULE_PARM(var,I2C_CLIENT_MODPARM); \ MODULE_PARM_DESC(var,desc) /* This is the one you want to use in your own modules */ #define I2C_CLIENT_INSMOD \ I2C_CLIENT_MODULE_PARM(probe, \ "List of adapter,address pairs to scan additionally"); \ I2C_CLIENT_MODULE_PARM(probe_range, \ "List of adapter,start-addr,end-addr triples to scan " \ "additionally"); \ I2C_CLIENT_MODULE_PARM(ignore, \ "List of adapter,address pairs not to scan"); \ I2C_CLIENT_MODULE_PARM(ignore_range, \ "List of adapter,start-addr,end-addr triples not to " \ "scan"); \ I2C_CLIENT_MODULE_PARM(force, \ "List of adapter,address pairs to boldly assume " \ "to be present"); \ static struct i2c_client_address_data addr_data = \ {normal_i2c, normal_i2c_range, \ probe, probe_range, \ ignore, ignore_range, \ force} /* Detect whether we are on the isa bus. If this returns true, all i2c access will fail! */ #define i2c_is_isa_client(clientptr) \ ((clientptr)->adapter->algo->id == I2C_ALGO_ISA) #define i2c_is_isa_adapter(adapptr) \ ((adapptr)->algo->id == I2C_ALGO_ISA) #endif /* def __KERNEL__ */ #endif /* I2C_H */