/************************************************************************** * Initio A100 device driver for Linux. * * Copyright (c) 1994-1998 Initio Corporation * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * -------------------------------------------------------------------------- * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Where this Software is combined with software released under the terms of * the GNU General Public License ("GPL") and the terms of the GPL would require the * combined work to also be released under the terms of the GPL, the terms * and conditions of this License will apply in addition to those of the * GPL with the exception of any terms or conditions of this License that * conflict with, or are expressly prohibited by, the GPL. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * ************************************************************************** * * module: inia100.c * DESCRIPTION: * This is the Linux low-level SCSI driver for Initio INIA100 SCSI host * adapters * 09/24/98 hl - v1.02 initial production release. * 12/19/98 bv - v1.02a Use spinlocks for 2.1.95 and up. **************************************************************************/ #define CVT_LINUX_VERSION(V,P,S) (V * 65536 + P * 256 + S) #ifndef LINUX_VERSION_CODE #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "scsi.h" #include "sd.h" #include "hosts.h" #include #include "inia100.h" static Scsi_Host_Template driver_template = INIA100; #include "scsi_module.c" #define ORC_RDWORD(x,y) (short)(inl((int)((ULONG)((ULONG)x+(UCHAR)y)) )) char *inia100_Copyright = "Copyright (C) 1998-99"; char *inia100_InitioName = "by Initio Corporation"; char *inia100_ProductName = "INI-A100U2W"; char *inia100_Version = "v1.02c"; /* set by inia100_setup according to the command line */ static int setup_called = 0; static int orc_num_ch = MAX_SUPPORTED_ADAPTERS; /* Maximum 4 adapters */ /* ---- INTERNAL VARIABLES ---- */ #define NUMBER(arr) (sizeof(arr) / sizeof(arr[0])) static char *setup_str = (char *) NULL; static void inia100_intr0(int irq, void *dev_id, struct pt_regs *); static void inia100_intr1(int irq, void *dev_id, struct pt_regs *); static void inia100_intr2(int irq, void *dev_id, struct pt_regs *); static void inia100_intr3(int irq, void *dev_id, struct pt_regs *); static void inia100_intr4(int irq, void *dev_id, struct pt_regs *); static void inia100_intr5(int irq, void *dev_id, struct pt_regs *); static void inia100_intr6(int irq, void *dev_id, struct pt_regs *); static void inia100_intr7(int irq, void *dev_id, struct pt_regs *); static void inia100_panic(char *msg); void inia100SCBPost(BYTE * pHcb, BYTE * pScb); /* ---- EXTERNAL VARIABLES ---- */ extern int Addinia100_into_Adapter_table(WORD, WORD, BYTE, BYTE, BYTE); extern void init_inia100Adapter_table(void); extern ORC_SCB *orc_alloc_scb(ORC_HCS * hcsp); extern void orc_exec_scb(ORC_HCS * hcsp, ORC_SCB * scbp); extern void orc_release_scb(ORC_HCS * hcsp, ORC_SCB * scbp); extern void orc_interrupt(ORC_HCS * hcsp); extern int orc_device_reset(ORC_HCS * pHCB, ULONG SCpnt, unsigned int target, unsigned int ResetFlags); extern int orc_reset_scsi_bus(ORC_HCS * pHCB); extern int abort_SCB(ORC_HCS * hcsp, ORC_SCB * pScb); extern int orc_abort_srb(ORC_HCS * hcsp, ULONG SCpnt); extern void get_orcPCIConfig(ORC_HCS * pCurHcb, int ch_idx); extern int init_orchid(ORC_HCS * hcsp); extern int orc_num_scb; extern ORC_HCS orc_hcs[]; /***************************************************************************** Function name : inia100AppendSRBToQueue Description : This function will push current request into save list Input : pSRB - Pointer to SCSI request block. pHCB - Pointer to host adapter structure Output : None. Return : None. *****************************************************************************/ static void inia100AppendSRBToQueue(ORC_HCS * pHCB, Scsi_Cmnd * pSRB) { ULONG flags; spin_lock_irqsave(&(pHCB->pSRB_lock), flags); pSRB->next = NULL; /* Pointer to next */ if (pHCB->pSRB_head == NULL) pHCB->pSRB_head = pSRB; else pHCB->pSRB_tail->next = pSRB; /* Pointer to next */ pHCB->pSRB_tail = pSRB; spin_unlock_irqrestore(&(pHCB->pSRB_lock), flags); return; } /***************************************************************************** Function name : inia100PopSRBFromQueue Description : This function will pop current request from save list Input : pHCB - Pointer to host adapter structure Output : None. Return : pSRB - Pointer to SCSI request block. *****************************************************************************/ static Scsi_Cmnd *inia100PopSRBFromQueue(ORC_HCS * pHCB) { Scsi_Cmnd *pSRB; ULONG flags; spin_lock_irqsave(&(pHCB->pSRB_lock), flags); if ((pSRB = (Scsi_Cmnd *) pHCB->pSRB_head) != NULL) { pHCB->pSRB_head = pHCB->pSRB_head->next; pSRB->next = NULL; } spin_unlock_irqrestore(&(pHCB->pSRB_lock), flags); return (pSRB); } /***************************************************************************** Function name : inia100_setup Description : Input : pHCB - Pointer to host adapter structure Output : None. Return : pSRB - Pointer to SCSI request block. *****************************************************************************/ void inia100_setup(char *str, int *ints) { if (setup_called) inia100_panic("inia100: inia100_setup called twice.\n"); setup_called = ints[0]; setup_str = str; } /***************************************************************************** Function name : orc_ReturnNumberOfAdapters Description : This function will scan PCI bus to get all Orchid card Input : None. Output : None. Return : SUCCESSFUL - Successful scan ohterwise - No drives founded *****************************************************************************/ int orc_ReturnNumberOfAdapters(void) { unsigned int i, iAdapters; iAdapters = 0; /* * PCI-bus probe. */ if (pcibios_present()) { struct { unsigned short vendor_id; unsigned short device_id; } const inia100_pci_devices[] = { {ORC_VENDOR_ID, I920_DEVICE_ID}, {ORC_VENDOR_ID, ORC_DEVICE_ID} }; unsigned int dRegValue; WORD wBIOS, wBASE; BYTE bPCIBusNum, bInterrupt, bPCIDeviceNum; #ifdef MMAPIO unsigned long page_offset, base; #endif struct pci_dev *pdev = NULL; bPCIBusNum = 0; bPCIDeviceNum = 0; init_inia100Adapter_table(); for (i = 0; i < NUMBER(inia100_pci_devices); i++) { pdev = NULL; while ((pdev = pci_find_device(inia100_pci_devices[i].vendor_id, inia100_pci_devices[i].device_id, pdev))) { if (pci_enable_device(pdev)) continue; if (iAdapters >= MAX_SUPPORTED_ADAPTERS) break; /* Never greater than maximum */ if (i == 0) { /* printk("inia100: The RAID controller is not supported by\n"); printk("inia100: this driver, we are ignoring it.\n"); */ } else { /* * Read sundry information from PCI BIOS. */ bPCIBusNum = pdev->bus->number; bPCIDeviceNum = pdev->devfn; dRegValue = pci_resource_start(pdev, 0); if (dRegValue == -1) { /* Check return code */ printk("\n\rinia100: orchid read configuration error.\n"); return (0); /* Read configuration space error */ } /* <02> read from base address + 0x50 offset to get the wBIOS balue. */ wBASE = (WORD) dRegValue; /* Now read the interrupt line value */ dRegValue = pdev->irq; bInterrupt = dRegValue; /* Assign interrupt line */ wBIOS = ORC_RDWORD(wBASE, 0x50); pci_set_master(pdev); #ifdef MMAPIO base = wBASE & PAGE_MASK; page_offset = wBASE - base; /* * replace the next line with this one if you are using 2.1.x: * temp_p->maddr = ioremap(base, page_offset + 256); */ wBASE = ioremap(base, page_offset + 256); if (wBASE) { wBASE += page_offset; } #endif if (Addinia100_into_Adapter_table(wBIOS, wBASE, bInterrupt, bPCIBusNum, bPCIDeviceNum) == SUCCESSFUL) iAdapters++; } } /* while(pdev=....) */ } /* for PCI_DEVICES */ } /* PCI BIOS present */ return (iAdapters); } /***************************************************************************** Function name : inia100_detect Description : Input : pHCB - Pointer to host adapter structure Output : None. Return : pSRB - Pointer to SCSI request block. *****************************************************************************/ int inia100_detect(Scsi_Host_Template * tpnt) { ORC_HCS *pHCB; struct Scsi_Host *hreg; U32 sz; U32 i; /* 01/14/98 */ int ok = 0, iAdapters; ULONG dBiosAdr; BYTE *pbBiosAdr; tpnt->proc_name = "INIA100"; if (setup_called) { /* Setup by inia100_setup */ printk("inia100: processing commandline: "); } /* Get total number of adapters in the motherboard */ iAdapters = orc_ReturnNumberOfAdapters(); /* printk("inia100: Total Initio Adapters = %d\n", iAdapters); */ if (iAdapters == 0) /* If no orc founded, return */ return (0); orc_num_ch = (iAdapters > orc_num_ch) ? orc_num_ch : iAdapters; orc_num_scb = ORC_MAXQUEUE; /* clear the memory needed for HCS */ i = orc_num_ch * sizeof(ORC_HCS); memset((unsigned char *) &orc_hcs[0], 0, i); /* Initialize orc_hcs 0 */ #if 0 printk("orc_num_scb= %x orc_num_ch= %x hcsize= %x scbsize= %x escbsize= %x\n", orc_num_scb, orc_num_ch, sizeof(ORC_HCS), sizeof(ORC_SCB), sizeof(ESCB)); #endif for (i = 0, pHCB = &orc_hcs[0]; /* Get pointer for control block */ i < orc_num_ch; i++, pHCB++) { pHCB->pSRB_head = NULL; /* Initial SRB save queue */ pHCB->pSRB_tail = NULL; /* Initial SRB save queue */ pHCB->pSRB_lock = SPIN_LOCK_UNLOCKED; /* SRB save queue lock */ pHCB->BitAllocFlagLock = SPIN_LOCK_UNLOCKED; /* Get total memory needed for SCB */ sz = orc_num_scb * sizeof(ORC_SCB); if ((pHCB->HCS_virScbArray = (PVOID) kmalloc(sz, GFP_ATOMIC | GFP_DMA)) == NULL) { printk("inia100: SCB memory allocation error\n"); return (0); } memset((unsigned char *) pHCB->HCS_virScbArray, 0, sz); pHCB->HCS_physScbArray = (U32) VIRT_TO_BUS(pHCB->HCS_virScbArray); /* Get total memory needed for ESCB */ sz = orc_num_scb * sizeof(ESCB); if ((pHCB->HCS_virEscbArray = (PVOID) kmalloc(sz, GFP_ATOMIC | GFP_DMA)) == NULL) { printk("inia100: ESCB memory allocation error\n"); /* ?? does pHCB->HCS_virtScbArray leak ??*/ return (0); } memset((unsigned char *) pHCB->HCS_virEscbArray, 0, sz); pHCB->HCS_physEscbArray = (U32) VIRT_TO_BUS(pHCB->HCS_virEscbArray); get_orcPCIConfig(pHCB, i); dBiosAdr = pHCB->HCS_BIOS; dBiosAdr = (dBiosAdr << 4); pbBiosAdr = phys_to_virt(dBiosAdr); if (init_orchid(pHCB)) { /* Initial orchid chip */ printk("inia100: initial orchid fail!!\n"); return (0); } request_region(pHCB->HCS_Base, 256, "inia100"); /* Register */ hreg = scsi_register(tpnt, sizeof(ORC_HCS)); if (hreg == NULL) { release_region(pHCB->HCS_Base, 256); /* Register */ return 0; } hreg->io_port = pHCB->HCS_Base; hreg->n_io_port = 0xff; hreg->can_queue = orc_num_scb; /* 03/05/98 */ hreg->unique_id = pHCB->HCS_Base; hreg->max_id = pHCB->HCS_MaxTar; hreg->max_lun = 32; /* 10/21/97 */ /* hreg->max_lun = 8; hreg->max_channel = 1; */ hreg->irq = pHCB->HCS_Intr; hreg->this_id = pHCB->HCS_SCSI_ID; /* Assign HCS index */ hreg->base = (unsigned long)pHCB; #if 1 hreg->sg_tablesize = TOTAL_SG_ENTRY; /* Maximun support is 32 */ #else hreg->sg_tablesize = SG_NONE; /* No SG */ #endif /* Initial orc chip */ switch (i) { case 0: ok = request_irq(pHCB->HCS_Intr, inia100_intr0, SA_INTERRUPT | SA_SHIRQ, "inia100", hreg); break; case 1: ok = request_irq(pHCB->HCS_Intr, inia100_intr1, SA_INTERRUPT | SA_SHIRQ, "inia100", hreg); break; case 2: ok = request_irq(pHCB->HCS_Intr, inia100_intr2, SA_INTERRUPT | SA_SHIRQ, "inia100", hreg); break; case 3: ok = request_irq(pHCB->HCS_Intr, inia100_intr3, SA_INTERRUPT | SA_SHIRQ, "inia100", hreg); break; case 4: ok = request_irq(pHCB->HCS_Intr, inia100_intr4, SA_INTERRUPT | SA_SHIRQ, "inia100", hreg); break; case 5: ok = request_irq(pHCB->HCS_Intr, inia100_intr5, SA_INTERRUPT | SA_SHIRQ, "inia100", hreg); break; case 6: ok = request_irq(pHCB->HCS_Intr, inia100_intr6, SA_INTERRUPT | SA_SHIRQ, "inia100", hreg); break; case 7: ok = request_irq(pHCB->HCS_Intr, inia100_intr7, SA_INTERRUPT | SA_SHIRQ, "inia100", hreg); break; default: inia100_panic("inia100: Too many host adapters\n"); break; } if (ok < 0) { if (ok == -EINVAL) { printk("inia100: bad IRQ %d.\n", pHCB->HCS_Intr); printk(" Contact author.\n"); } else { if (ok == -EBUSY) printk("inia100: IRQ %d already in use. Configure another.\n", pHCB->HCS_Intr); else { printk("\ninia100: Unexpected error code on requesting IRQ %d.\n", pHCB->HCS_Intr); printk(" Contact author.\n"); } } inia100_panic("inia100: driver needs an IRQ.\n"); } } tpnt->this_id = -1; tpnt->can_queue = 1; return 1; } /***************************************************************************** Function name : inia100BuildSCB Description : Input : pHCB - Pointer to host adapter structure Output : None. Return : pSRB - Pointer to SCSI request block. *****************************************************************************/ static void inia100BuildSCB(ORC_HCS * pHCB, ORC_SCB * pSCB, Scsi_Cmnd * SCpnt) { /* Create corresponding SCB */ struct scatterlist *pSrbSG; ORC_SG *pSG; /* Pointer to SG list */ int i; U32 TotalLen; ESCB *pEScb; pEScb = pSCB->SCB_EScb; pEScb->SCB_Srb = SCpnt; pSG = NULL; pSCB->SCB_Opcode = ORC_EXECSCSI; pSCB->SCB_Flags = SCF_NO_DCHK; /* Clear done bit */ pSCB->SCB_Target = SCpnt->target; pSCB->SCB_Lun = SCpnt->lun; pSCB->SCB_Reserved0 = 0; pSCB->SCB_Reserved1 = 0; pSCB->SCB_SGLen = 0; if ((pSCB->SCB_XferLen = (U32) SCpnt->request_bufflen)) { pSG = (ORC_SG *) & pEScb->ESCB_SGList[0]; if (SCpnt->use_sg) { TotalLen = 0; pSCB->SCB_SGLen = (U32) (SCpnt->use_sg * 8); pSrbSG = (struct scatterlist *) SCpnt->request_buffer; for (i = 0; i < SCpnt->use_sg; i++, pSG++, pSrbSG++) { pSG->SG_Ptr = (U32) (VIRT_TO_BUS(pSrbSG->address)); pSG->SG_Len = (U32) pSrbSG->length; TotalLen += (U32) pSrbSG->length; } } else { /* Non SG */ pSCB->SCB_SGLen = 0x8; pSG->SG_Ptr = (U32) (VIRT_TO_BUS(SCpnt->request_buffer)); pSG->SG_Len = (U32) SCpnt->request_bufflen; } } pSCB->SCB_SGPAddr = (U32) pSCB->SCB_SensePAddr; pSCB->SCB_HaStat = 0; pSCB->SCB_TaStat = 0; pSCB->SCB_Link = 0xFF; pSCB->SCB_SenseLen = SENSE_SIZE; pSCB->SCB_CDBLen = SCpnt->cmd_len; if (pSCB->SCB_CDBLen >= IMAX_CDB) { printk("max cdb length= %x\b", SCpnt->cmd_len); pSCB->SCB_CDBLen = IMAX_CDB; } pSCB->SCB_Ident = SCpnt->lun | DISC_ALLOW; if (SCpnt->device->tagged_supported) { /* Tag Support */ pSCB->SCB_TagMsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */ } else { pSCB->SCB_TagMsg = 0; /* No tag support */ } memcpy(&pSCB->SCB_CDB[0], &SCpnt->cmnd, pSCB->SCB_CDBLen); return; } /***************************************************************************** Function name : inia100_queue Description : Queue a command and setup interrupts for a free bus. Input : pHCB - Pointer to host adapter structure Output : None. Return : pSRB - Pointer to SCSI request block. *****************************************************************************/ int inia100_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) { register ORC_SCB *pSCB; ORC_HCS *pHCB; /* Point to Host adapter control block */ if (SCpnt->lun > 16) { SCpnt->result = (DID_TIME_OUT << 16); done(SCpnt); /* Notify system DONE */ return (0); } pHCB = (ORC_HCS *) SCpnt->host->base; SCpnt->scsi_done = done; /* Get free SCSI control block */ if ((pSCB = orc_alloc_scb(pHCB)) == NULL) { inia100AppendSRBToQueue(pHCB, SCpnt); /* Buffer this request */ /* printk("inia100_entry: can't allocate SCB\n"); */ return (0); } inia100BuildSCB(pHCB, pSCB, SCpnt); orc_exec_scb(pHCB, pSCB); /* Start execute SCB */ return (0); } /***************************************************************************** Function name : inia100_command Description : We only support command in interrupt-driven fashion Input : pHCB - Pointer to host adapter structure Output : None. Return : pSRB - Pointer to SCSI request block. *****************************************************************************/ int inia100_command(Scsi_Cmnd * SCpnt) { printk("inia100: interrupt driven driver; use inia100_queue()\n"); return -1; } /***************************************************************************** Function name : inia100_abort Description : Abort a queued command. (commands that are on the bus can't be aborted easily) Input : pHCB - Pointer to host adapter structure Output : None. Return : pSRB - Pointer to SCSI request block. *****************************************************************************/ int inia100_abort(Scsi_Cmnd * SCpnt) { ORC_HCS *hcsp; hcsp = (ORC_HCS *) SCpnt->host->base; return orc_abort_srb(hcsp, (ULONG) SCpnt); } /***************************************************************************** Function name : inia100_reset Description : Reset registers, reset a hanging bus and kill active and disconnected commands for target w/o soft reset Input : pHCB - Pointer to host adapter structure Output : None. Return : pSRB - Pointer to SCSI request block. *****************************************************************************/ int inia100_reset(Scsi_Cmnd * SCpnt, unsigned int reset_flags) { /* I need Host Control Block Information */ ORC_HCS *pHCB; pHCB = (ORC_HCS *) SCpnt->host->base; if (reset_flags & (SCSI_RESET_SUGGEST_BUS_RESET | SCSI_RESET_SUGGEST_HOST_RESET)) return orc_reset_scsi_bus(pHCB); else return orc_device_reset(pHCB, (ULONG) SCpnt, SCpnt->target, reset_flags); } /***************************************************************************** Function name : inia100SCBPost Description : This is callback routine be called when orc finish one SCSI command. Input : pHCB - Pointer to host adapter control block. pSCB - Pointer to SCSI control block. Output : None. Return : None. *****************************************************************************/ void inia100SCBPost(BYTE * pHcb, BYTE * pScb) { Scsi_Cmnd *pSRB; /* Pointer to SCSI request block */ ORC_HCS *pHCB; ORC_SCB *pSCB; ESCB *pEScb; pHCB = (ORC_HCS *) pHcb; pSCB = (ORC_SCB *) pScb; pEScb = pSCB->SCB_EScb; if ((pSRB = (Scsi_Cmnd *) pEScb->SCB_Srb) == 0) { printk("inia100SCBPost: SRB pointer is empty\n"); orc_release_scb(pHCB, pSCB); /* Release SCB for current channel */ return; } pEScb->SCB_Srb = NULL; switch (pSCB->SCB_HaStat) { case 0x0: case 0xa: /* Linked command complete without error and linked normally */ case 0xb: /* Linked command complete without error interrupt generated */ pSCB->SCB_HaStat = 0; break; case 0x11: /* Selection time out-The initiator selection or target reselection was not complete within the SCSI Time out period */ pSCB->SCB_HaStat = DID_TIME_OUT; break; case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus phase sequence was requested by the target. The host adapter will generate a SCSI Reset Condition, notifying the host with a SCRD interrupt */ pSCB->SCB_HaStat = DID_RESET; break; case 0x1a: /* SCB Aborted. 07/21/98 */ pSCB->SCB_HaStat = DID_ABORT; break; case 0x12: /* Data overrun/underrun-The target attempted to transfer more data than was allocated by the Data Length field or the sum of the Scatter / Gather Data Length fields. */ case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */ case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid. */ default: printk("inia100: %x %x\n", pSCB->SCB_HaStat, pSCB->SCB_TaStat); pSCB->SCB_HaStat = DID_ERROR; /* Couldn't find any better */ break; } if (pSCB->SCB_TaStat == 2) { /* Check condition */ memcpy((unsigned char *) &pSRB->sense_buffer[0], (unsigned char *) &pEScb->ESCB_SGList[0], SENSE_SIZE); } pSRB->result = pSCB->SCB_TaStat | (pSCB->SCB_HaStat << 16); pSRB->scsi_done(pSRB); /* Notify system DONE */ /* Find the next pending SRB */ if ((pSRB = inia100PopSRBFromQueue(pHCB)) != NULL) { /* Assume resend will success */ /* Reuse old SCB */ inia100BuildSCB(pHCB, pSCB, pSRB); /* Create corresponding SCB */ orc_exec_scb(pHCB, pSCB); /* Start execute SCB */ } else { /* No Pending SRB */ orc_release_scb(pHCB, pSCB); /* Release SCB for current channel */ } return; } /***************************************************************************** Function name : inia100_biosparam Description : Return the "logical geometry" Input : pHCB - Pointer to host adapter structure Output : None. Return : pSRB - Pointer to SCSI request block. *****************************************************************************/ int inia100_biosparam(Scsi_Disk * disk, kdev_t dev, int *info_array) { ORC_HCS *pHcb; /* Point to Host adapter control block */ ORC_TCS *pTcb; pHcb = (ORC_HCS *) disk->device->host->base; pTcb = &pHcb->HCS_Tcs[disk->device->id]; if (pTcb->TCS_DrvHead) { info_array[0] = pTcb->TCS_DrvHead; info_array[1] = pTcb->TCS_DrvSector; info_array[2] = disk->capacity / pTcb->TCS_DrvHead / pTcb->TCS_DrvSector; } else { if (pTcb->TCS_DrvFlags & TCF_DRV_255_63) { info_array[0] = 255; info_array[1] = 63; info_array[2] = disk->capacity / 255 / 63; } else { info_array[0] = 64; info_array[1] = 32; info_array[2] = disk->capacity >> 11; } } return 0; } static void subIntr(ORC_HCS * pHCB, int irqno) { unsigned long flags; spin_lock_irqsave(&io_request_lock, flags); if (pHCB->HCS_Intr != irqno) { spin_unlock_irqrestore(&io_request_lock, flags); return; } orc_interrupt(pHCB); spin_unlock_irqrestore(&io_request_lock, flags); } /* * Interrupts handler (main routine of the driver) */ static void inia100_intr0(int irqno, void *dev_id, struct pt_regs *regs) { subIntr(&orc_hcs[0], irqno); } static void inia100_intr1(int irqno, void *dev_id, struct pt_regs *regs) { subIntr(&orc_hcs[1], irqno); } static void inia100_intr2(int irqno, void *dev_id, struct pt_regs *regs) { subIntr(&orc_hcs[2], irqno); } static void inia100_intr3(int irqno, void *dev_id, struct pt_regs *regs) { subIntr(&orc_hcs[3], irqno); } static void inia100_intr4(int irqno, void *dev_id, struct pt_regs *regs) { subIntr(&orc_hcs[4], irqno); } static void inia100_intr5(int irqno, void *dev_id, struct pt_regs *regs) { subIntr(&orc_hcs[5], irqno); } static void inia100_intr6(int irqno, void *dev_id, struct pt_regs *regs) { subIntr(&orc_hcs[6], irqno); } static void inia100_intr7(int irqno, void *dev_id, struct pt_regs *regs) { subIntr(&orc_hcs[7], irqno); } /* * Dump the current driver status and panic... */ static void inia100_panic(char *msg) { printk("\ninia100_panic: %s\n", msg); panic("inia100 panic"); } /* * Release ressources */ int inia100_release(struct Scsi_Host *hreg) { free_irq(hreg->irq, hreg); release_region(hreg->io_port, 256); return 0; } MODULE_LICENSE("Dual BSD/GPL"); /*#include "inia100scsi.c" */