/* * ASCII values for a number of symbolic constants, printing functions, * etc. * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422) * */ #define __NO_VERSION__ #include #include #include #include #include "scsi.h" #include "hosts.h" #define CONST_COMMAND 0x01 #define CONST_STATUS 0x02 #define CONST_SENSE 0x04 #define CONST_XSENSE 0x08 #define CONST_CMND 0x10 #define CONST_MSG 0x20 #define CONST_HOST 0x40 #define CONST_DRIVER 0x80 static const char unknown[] = "UNKNOWN"; #ifdef CONFIG_SCSI_CONSTANTS #ifdef CONSTANTS #undef CONSTANTS #endif #define CONSTANTS (CONST_COMMAND | CONST_STATUS | CONST_SENSE | CONST_XSENSE \ | CONST_CMND | CONST_MSG | CONST_HOST | CONST_DRIVER) #endif #if (CONSTANTS & CONST_COMMAND) static const char * group_0_commands[] = { /* 00-03 */ "Test Unit Ready", "Rezero Unit", unknown, "Request Sense", /* 04-07 */ "Format Unit", "Read Block Limits", unknown, "Reasssign Blocks", /* 08-0d */ "Read (6)", unknown, "Write (6)", "Seek (6)", unknown, unknown, /* 0e-12 */ unknown, "Read Reverse", "Write Filemarks", "Space", "Inquiry", /* 13-16 */ "Verify", "Recover Buffered Data", "Mode Select", "Reserve", /* 17-1b */ "Release", "Copy", "Erase", "Mode Sense", "Start/Stop Unit", /* 1c-1d */ "Receive Diagnostic", "Send Diagnostic", /* 1e-1f */ "Prevent/Allow Medium Removal", unknown, }; static const char *group_1_commands[] = { /* 20-22 */ unknown, unknown, unknown, /* 23-28 */ unknown, "Define window parameters", "Read Capacity", unknown, unknown, "Read (10)", /* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase", "Read updated block", /* 2e-31 */ "Write Verify","Verify", "Search High", "Search Equal", /* 32-34 */ "Search Low", "Set Limits", "Prefetch or Read Position", /* 35-37 */ "Synchronize Cache","Lock/Unlock Cache", "Read Defect Data", /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", "Read Buffer", /* 3d-3f */ "Update Block", "Read Long", "Write Long", }; static const char *group_2_commands[] = { /* 40-41 */ "Change Definition", "Write Same", /* 42-48 */ "Read sub-channel", "Read TOC", "Read header", "Play audio (10)", unknown, "Play audio msf", "Play audio track/index", /* 49-4f */ "Play track relative (10)", unknown, "Pause/resume", "Log Select", "Log Sense", unknown, unknown, /* 50-55 */ unknown, unknown, unknown, unknown, unknown, "Mode Select (10)", /* 56-5b */ unknown, unknown, unknown, unknown, "Mode Sense (10)", unknown, /* 5c-5f */ unknown, unknown, unknown, }; /* The following are 16 byte commands in group 4 */ static const char *group_4_commands[] = { /* 80-84 */ unknown, unknown, unknown, unknown, unknown, /* 85-89 */ "Memory Export In (16)", unknown, unknown, unknown, "Memory Export Out (16)", /* 8a-8f */ unknown, unknown, unknown, unknown, unknown, unknown, /* 90-94 */ unknown, unknown, unknown, unknown, unknown, /* 95-99 */ unknown, unknown, unknown, unknown, unknown, /* 9a-9f */ unknown, unknown, unknown, unknown, unknown, unknown, }; /* The following are 12 byte commands in group 5 */ static const char *group_5_commands[] = { /* a0-a5 */ unknown, unknown, unknown, unknown, unknown, "Move medium/play audio(12)", /* a6-a9 */ "Exchange medium", unknown, "Read(12)", "Play track relative(12)", /* aa-ae */ "Write(12)", unknown, "Erase(12)", unknown, "Write and verify(12)", /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)", /* b2-b4 */ "Search data low(12)", "Set limits(12)", unknown, /* b5-b6 */ "Request volume element address", "Send volume tag", /* b7-b9 */ "Read defect data(12)", "Read element status", unknown, /* ba-bf */ unknown, unknown, unknown, unknown, unknown, unknown, }; #define group(opcode) (((opcode) >> 5) & 7) #define RESERVED_GROUP 0 #define VENDOR_GROUP 1 static const char **commands[] = { group_0_commands, group_1_commands, group_2_commands, (const char **) RESERVED_GROUP, group_4_commands, group_5_commands, (const char **) VENDOR_GROUP, (const char **) VENDOR_GROUP }; static const char reserved[] = "RESERVED"; static const char vendor[] = "VENDOR SPECIFIC"; static void print_opcode(int opcode) { const char **table = commands[ group(opcode) ]; switch ((unsigned long) table) { case RESERVED_GROUP: printk("%s(0x%02x) ", reserved, opcode); break; case VENDOR_GROUP: printk("%s(0x%02x) ", vendor, opcode); break; default: if (table[opcode & 0x1f] != unknown) printk("%s ",table[opcode & 0x1f]); else printk("%s(0x%02x) ", unknown, opcode); break; } } #else /* CONST & CONST_COMMAND */ static void print_opcode(int opcode) { printk("0x%02x ", opcode); } #endif void print_command (unsigned char *command) { int i,s; print_opcode(command[0]); for ( i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) printk("%02x ", command[i]); printk("\n"); } #if (CONSTANTS & CONST_STATUS) static const char * statuses[] = { /* 0-4 */ "Good", "Check Condition", "Condition Met", unknown, "Busy", /* 5-9 */ unknown, unknown, unknown, "Intermediate", unknown, /* a-c */ "Intermediate-Condition Met", unknown, "Reservation Conflict", /* d-10 */ unknown, unknown, unknown, unknown, /* 11-14 */ "Command Terminated", unknown, unknown, "Queue Full", /* 15-1a */ unknown, unknown, unknown, unknown, unknown, unknown, /* 1b-1f */ unknown, unknown, unknown, unknown, unknown, }; #endif void print_status (int status) { status = (status >> 1) & 0x1f; #if (CONSTANTS & CONST_STATUS) printk("%s ",statuses[status]); #else printk("0x%0x ", status); #endif } #if (CONSTANTS & CONST_XSENSE) #define D 0x0001 /* DIRECT ACCESS DEVICE (disk) */ #define T 0x0002 /* SEQUENTIAL ACCESS DEVICE (tape) */ #define L 0x0004 /* PRINTER DEVICE */ #define P 0x0008 /* PROCESSOR DEVICE */ #define W 0x0010 /* WRITE ONCE READ MULTIPLE DEVICE */ #define R 0x0020 /* READ ONLY (CD-ROM) DEVICE */ #define S 0x0040 /* SCANNER DEVICE */ #define O 0x0080 /* OPTICAL MEMORY DEVICE */ #define M 0x0100 /* MEDIA CHANGER DEVICE */ #define C 0x0200 /* COMMUNICATION DEVICE */ #define A 0x0400 /* ARRAY STORAGE */ #define E 0x0800 /* ENCLOSURE SERVICES DEVICE */ #define B 0x1000 /* SIMPLIFIED DIRECT ACCESS DEVICE */ #define K 0x2000 /* OPTICAL CARD READER/WRITER DEVICE */ struct error_info{ unsigned char code1, code2; unsigned short int devices; const char * text; }; struct error_info2{ unsigned char code1, code2_min, code2_max; unsigned short int devices; const char * text; }; static struct error_info2 additional2[] = { {0x40,0x00,0x7f,D,"Ram failure (%x)"}, {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"}, {0x41,0x00,0xff,D,"Data path failure (%x)"}, {0x42,0x00,0xff,D,"Power-on or self-test failure (%x)"}, {0, 0, 0, 0, NULL} }; static struct error_info additional[] = { {0x00,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"No additional sense information"}, {0x00,0x01,T,"Filemark detected"}, {0x00,0x02,T|S,"End-of-partition/medium detected"}, {0x00,0x03,T,"Setmark detected"}, {0x00,0x04,T|S,"Beginning-of-partition/medium detected"}, {0x00,0x05,T|L|S,"End-of-data detected"}, {0x00,0x06,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"I/O process terminated"}, {0x00,0x11,R,"Audio play operation in progress"}, {0x00,0x12,R,"Audio play operation paused"}, {0x00,0x13,R,"Audio play operation successfully completed"}, {0x00,0x14,R,"Audio play operation stopped due to error"}, {0x00,0x15,R,"No current audio status to return"}, {0x00,0x16,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Operation in progress"}, {0x00,0x17,D|T|L|W|R|S|O|M|A|E|B|K,"Cleaning requested"}, {0x01,0x00,D|W|O|B|K,"No index/sector signal"}, {0x02,0x00,D|W|R|O|M|B|K,"No seek complete"}, {0x03,0x00,D|T|L|W|S|O|B|K,"Peripheral device write fault"}, {0x03,0x01,T,"No write current"}, {0x03,0x02,T,"Excessive write errors"}, {0x04,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,cause not reportable"}, {0x04,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit is in process of becoming ready"}, {0x04,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,initializing cmd. required"}, {0x04,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,manual intervention required"}, {0x04,0x04,D|T|L|R|O|B,"Logical unit not ready,format in progress"}, {0x04,0x05,D|T|W|O|M|C|A|B|K,"Logical unit not ready,rebuild in progress"}, {0x04,0x06,D|T|W|O|M|C|A|B|K,"Logical unit not ready,recalculation in progress"}, {0x04,0x07,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,operation in progress"}, {0x04,0x08,R,"Logical unit not ready,long write in progress"}, {0x04,0x09,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,self-test in progress"}, {0x05,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit does not respond to selection"}, {0x06,0x00,D|W|R|O|M|B|K,"No reference position found"}, {0x07,0x00,D|T|L|W|R|S|O|M|B|K,"Multiple peripheral devices selected"}, {0x08,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit communication failure"}, {0x08,0x01,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit communication time-out"}, {0x08,0x02,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit communication parity error"}, {0x08,0x03,D|T|R|O|M|B|K,"Logical unit communication CRC error (Ultra-DMA/32)"}, {0x08,0x04,D|T|L|P|W|R|S|O|C|K,"Unreachable copy target"}, {0x09,0x00,D|T|W|R|O|B,"Track following error"}, {0x09,0x01,W|R|O|K,"Tracking servo failure"}, {0x09,0x02,W|R|O|K,"Focus servo failure"}, {0x09,0x03,W|R|O,"Spindle servo failure"}, {0x09,0x04,D|T|W|R|O|B,"Head select fault"}, {0x0A,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Error log overflow"}, {0x0B,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Warning"}, {0x0B,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Warning - specified temperature exceeded"}, {0x0B,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Warning - enclosure degraded"}, {0x0C,0x00,T|R|S,"Write error"}, {0x0C,0x01,K,"Write error - recovered with auto reallocation"}, {0x0C,0x02,D|W|O|B|K,"Write error - auto reallocation failed"}, {0x0C,0x03,D|W|O|B|K,"Write error - recommend reassignment"}, {0x0C,0x04,D|T|W|O|B,"Compression check miscompare error"}, {0x0C,0x05,D|T|W|O|B,"Data expansion occurred during compression"}, {0x0C,0x06,D|T|W|O|B,"Block not compressible"}, {0x0C,0x07,R,"Write error - recovery needed"}, {0x0C,0x08,R,"Write error - recovery failed"}, {0x0C,0x09,R,"Write error - loss of streaming"}, {0x0C,0x0A,R,"Write error - padding blocks added"}, {0x10,0x00,D|W|O|B|K,"Id CRC or ECC error"}, {0x11,0x00,D|T|W|R|S|O|B|K,"Unrecovered read error"}, {0x11,0x01,D|T|W|R|S|O|B|K,"Read retries exhausted"}, {0x11,0x02,D|T|W|R|S|O|B|K,"Error too long to correct"}, {0x11,0x03,D|T|W|S|O|B|K,"Multiple read errors"}, {0x11,0x04,D|W|O|B|K,"Unrecovered read error - auto reallocate failed"}, {0x11,0x05,W|R|O|B,"L-EC uncorrectable error"}, {0x11,0x06,W|R|O|B,"CIRC unrecovered error"}, {0x11,0x07,W|O|B,"Data re-synchronization error"}, {0x11,0x08,T,"Incomplete block read"}, {0x11,0x09,T,"No gap found"}, {0x11,0x0A,D|T|O|B|K,"Miscorrected error"}, {0x11,0x0B,D|W|O|B|K,"Unrecovered read error - recommend reassignment"}, {0x11,0x0C,D|W|O|B|K,"Unrecovered read error - recommend rewrite the data"}, {0x11,0x0D,D|T|W|R|O|B,"De-compression CRC error"}, {0x11,0x0E,D|T|W|R|O|B,"Cannot decompress using declared algorithm"}, {0x11,0x0F,R,"Error reading UPC/EAN number"}, {0x11,0x10,R,"Error reading ISRC number"}, {0x11,0x11,R,"Read error - loss of streaming"}, {0x12,0x00,D|W|O|B|K,"Address mark not found for id field"}, {0x13,0x00,D|W|O|B|K,"Address mark not found for data field"}, {0x14,0x00,D|T|L|W|R|S|O|B|K,"Recorded entity not found"}, {0x14,0x01,D|T|W|R|O|B|K,"Record not found"}, {0x14,0x02,T,"Filemark or setmark not found"}, {0x14,0x03,T,"End-of-data not found"}, {0x14,0x04,T,"Block sequence error"}, {0x14,0x05,D|T|W|O|B|K,"Record not found - recommend reassignment"}, {0x14,0x06,D|T|W|O|B|K,"Record not found - data auto-reallocated"}, {0x15,0x00,D|T|L|W|R|S|O|M|B|K,"Random positioning error"}, {0x15,0x01,D|T|L|W|R|S|O|M|B|K,"Mechanical positioning error"}, {0x15,0x02,D|T|W|R|O|B|K,"Positioning error detected by read of medium"}, {0x16,0x00,D|W|O|B|K,"Data synchronization mark error"}, {0x16,0x01,D|W|O|B|K,"Data sync error - data rewritten"}, {0x16,0x02,D|W|O|B|K,"Data sync error - recommend rewrite"}, {0x16,0x03,D|W|O|B|K,"Data sync error - data auto-reallocated"}, {0x16,0x04,D|W|O|B|K,"Data sync error - recommend reassignment"}, {0x17,0x00,D|T|W|R|S|O|B|K,"Recovered data with no error correction applied"}, {0x17,0x01,D|T|W|R|S|O|B|K,"Recovered data with retries"}, {0x17,0x02,D|T|W|R|O|B|K,"Recovered data with positive head offset"}, {0x17,0x03,D|T|W|R|O|B|K,"Recovered data with negative head offset"}, {0x17,0x04,W|R|O|B,"Recovered data with retries and/or circ applied"}, {0x17,0x05,D|W|R|O|B|K,"Recovered data using previous sector id"}, {0x17,0x06,D|W|O|B|K,"Recovered data without ecc - data auto-reallocated"}, {0x17,0x07,D|W|R|O|B|K,"Recovered data without ecc - recommend reassignment"}, {0x17,0x08,D|W|R|O|B|K,"Recovered data without ecc - recommend rewrite"}, {0x17,0x09,D|W|R|O|B|K,"Recovered data without ecc - data rewritten"}, {0x18,0x00,D|T|W|R|O|B|K,"Recovered data with error correction applied"}, {0x18,0x01,D|W|R|O|B|K,"Recovered data with error corr. & retries applied"}, {0x18,0x02,D|W|R|O|B|K,"Recovered data - data auto-reallocated"}, {0x18,0x03,R,"Recovered data with CIRC"}, {0x18,0x04,R,"Recovered data with L-EC"}, {0x18,0x05,D|W|R|O|B|K,"Recovered data - recommend reassignment"}, {0x18,0x06,D|W|R|O|B|K,"Recovered data - recommend rewrite"}, {0x18,0x07,D|W|O|B|K,"Recovered data with ecc - data rewritten"}, {0x19,0x00,D|O|K,"Defect list error"}, {0x19,0x01,D|O|K,"Defect list not available"}, {0x19,0x02,D|O|K,"Defect list error in primary list"}, {0x19,0x03,D|O|K,"Defect list error in grown list"}, {0x1A,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Parameter list length error"}, {0x1B,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Synchronous data transfer error"}, {0x1C,0x00,D|O|B|K,"Defect list not found"}, {0x1C,0x01,D|O|B|K,"Primary defect list not found"}, {0x1C,0x02,D|O|B|K,"Grown defect list not found"}, {0x1D,0x00,D|T|W|R|O|B|K,"Miscompare during verify operation"}, {0x1E,0x00,D|W|O|B|K,"Recovered id with ecc correction"}, {0x1F,0x00,D|O|K,"Partial defect list transfer"}, {0x20,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid command operation code"}, {0x21,0x00,D|T|W|R|O|M|B|K,"Logical block address out of range"}, {0x21,0x01,D|T|W|R|O|M|B|K,"Invalid element address"}, {0x22,0x00,D,"Illegal function (use 20 00,24 00,or 26 00)"}, {0x24,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid field in cdb"}, {0x24,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"CDB decryption error"}, {0x25,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not supported"}, {0x26,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid field in parameter list"}, {0x26,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Parameter not supported"}, {0x26,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Parameter value invalid"}, {0x26,0x03,D|T|L|P|W|R|S|O|M|C|A|E|K,"Threshold parameters not supported"}, {0x26,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid release of persistent reservation"}, {0x26,0x05,D|T|L|P|W|R|S|O|M|C|A|B|K,"Data decryption error"}, {0x26,0x06,D|T|L|P|W|R|S|O|C|K,"Too many target descriptors"}, {0x26,0x07,D|T|L|P|W|R|S|O|C|K,"Unsupported target descriptor type code"}, {0x26,0x08,D|T|L|P|W|R|S|O|C|K,"Too many segment descriptors"}, {0x26,0x09,D|T|L|P|W|R|S|O|C|K,"Unsupported segment descriptor type code"}, {0x26,0x0A,D|T|L|P|W|R|S|O|C|K,"Unexpected inexact segment"}, {0x26,0x0B,D|T|L|P|W|R|S|O|C|K,"Inline data length exceeded"}, {0x26,0x0C,D|T|L|P|W|R|S|O|C|K,"Invalid operation for copy source or destination"}, {0x26,0x0D,D|T|L|P|W|R|S|O|C|K,"Copy segment granularity violation"}, {0x27,0x00,D|T|W|R|O|B|K,"Write protected"}, {0x27,0x01,D|T|W|R|O|B|K,"Hardware write protected"}, {0x27,0x02,D|T|W|R|O|B|K,"Logical unit software write protected"}, {0x27,0x03,T|R,"Associated write protect"}, {0x27,0x04,T|R,"Persistent write protect"}, {0x27,0x05,T|R,"Permanent write protect"}, {0x28,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Not ready to ready change,medium may have changed"}, {0x28,0x01,D|T|W|R|O|M|B,"Import or export element accessed"}, {0x29,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Power on,reset,or bus device reset occurred"}, {0x29,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Power on occurred"}, {0x29,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Scsi bus reset occurred"}, {0x29,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Bus device reset function occurred"}, {0x29,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Device internal reset"}, {0x29,0x05,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Transceiver mode changed to single-ended"}, {0x29,0x06,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Transceiver mode changed to lvd"}, {0x2A,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Parameters changed"}, {0x2A,0x01,D|T|L|W|R|S|O|M|C|A|E|B|K,"Mode parameters changed"}, {0x2A,0x02,D|T|L|W|R|S|O|M|C|A|E|K,"Log parameters changed"}, {0x2A,0x03,D|T|L|P|W|R|S|O|M|C|A|E|K,"Reservations preempted"}, {0x2A,0x04,D|T|L|P|W|R|S|O|M|C|A|E,"Reservations released"}, {0x2A,0x05,D|T|L|P|W|R|S|O|M|C|A|E,"Registrations preempted"}, {0x2B,0x00,D|T|L|P|W|R|S|O|C|K,"Copy cannot execute since host cannot disconnect"}, {0x2C,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Command sequence error"}, {0x2C,0x01,S,"Too many windows specified"}, {0x2C,0x02,S,"Invalid combination of windows specified"}, {0x2C,0x03,R,"Current program area is not empty"}, {0x2C,0x04,R,"Current program area is empty"}, {0x2C,0x05,B,"Illegal power condition request"}, {0x2D,0x00,T,"Overwrite error on update in place"}, {0x2F,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Commands cleared by another initiator"}, {0x30,0x00,D|T|W|R|O|M|B|K,"Incompatible medium installed"}, {0x30,0x01,D|T|W|R|O|B|K,"Cannot read medium - unknown format"}, {0x30,0x02,D|T|W|R|O|B|K,"Cannot read medium - incompatible format"}, {0x30,0x03,D|T|R|K,"Cleaning cartridge installed"}, {0x30,0x04,D|T|W|R|O|B|K,"Cannot write medium - unknown format"}, {0x30,0x05,D|T|W|R|O|B|K,"Cannot write medium - incompatible format"}, {0x30,0x06,D|T|W|R|O|B,"Cannot format medium - incompatible medium"}, {0x30,0x07,D|T|L|W|R|S|O|M|A|E|B|K,"Cleaning failure"}, {0x30,0x08,R,"Cannot write - application code mismatch"}, {0x30,0x09,R,"Current session not fixated for append"}, {0x31,0x00,D|T|W|R|O|B|K,"Medium format corrupted"}, {0x31,0x01,D|L|R|O|B,"Format command failed"}, {0x32,0x00,D|W|O|B|K,"No defect spare location available"}, {0x32,0x01,D|W|O|B|K,"Defect list update failure"}, {0x33,0x00,T,"Tape length error"}, {0x34,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure failure"}, {0x35,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services failure"}, {0x35,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Unsupported enclosure function"}, {0x35,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services unavailable"}, {0x35,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services transfer failure"}, {0x35,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services transfer refused"}, {0x36,0x00,L,"Ribbon,ink,or toner failure"}, {0x37,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Rounded parameter"}, {0x38,0x00,B,"Event status notification"}, {0x38,0x02,B,"Esn - power management class event"}, {0x38,0x04,B,"Esn - media class event"}, {0x38,0x06,B,"Esn - device busy class event"}, {0x39,0x00,D|T|L|W|R|S|O|M|C|A|E|K,"Saving parameters not supported"}, {0x3A,0x00,D|T|L|W|R|S|O|M|B|K,"Medium not present"}, {0x3A,0x01,D|T|W|R|O|M|B|K,"Medium not present - tray closed"}, {0x3A,0x02,D|T|W|R|O|M|B|K,"Medium not present - tray open"}, {0x3A,0x03,D|T|W|R|O|M|B,"Medium not present - loadable"}, {0x3A,0x04,D|T|W|R|O|M|B,"Medium not present - medium auxiliary memory accessible"}, {0x3B,0x00,T|L,"Sequential positioning error"}, {0x3B,0x01,T,"Tape position error at beginning-of-medium"}, {0x3B,0x02,T,"Tape position error at end-of-medium"}, {0x3B,0x03,L,"Tape or electronic vertical forms unit not ready"}, {0x3B,0x04,L,"Slew failure"}, {0x3B,0x05,L,"Paper jam"}, {0x3B,0x06,L,"Failed to sense top-of-form"}, {0x3B,0x07,L,"Failed to sense bottom-of-form"}, {0x3B,0x08,T,"Reposition error"}, {0x3B,0x09,S,"Read past end of medium"}, {0x3B,0x0A,S,"Read past beginning of medium"}, {0x3B,0x0B,S,"Position past end of medium"}, {0x3B,0x0C,T|S,"Position past beginning of medium"}, {0x3B,0x0D,D|T|W|R|O|M|B|K,"Medium destination element full"}, {0x3B,0x0E,D|T|W|R|O|M|B|K,"Medium source element empty"}, {0x3B,0x0F,R,"End of medium reached"}, {0x3B,0x11,D|T|W|R|O|M|B|K,"Medium magazine not accessible"}, {0x3B,0x12,D|T|W|R|O|M|B|K,"Medium magazine removed"}, {0x3B,0x13,D|T|W|R|O|M|B|K,"Medium magazine inserted"}, {0x3B,0x14,D|T|W|R|O|M|B|K,"Medium magazine locked"}, {0x3B,0x15,D|T|W|R|O|M|B|K,"Medium magazine unlocked"}, {0x3B,0x16,R,"Mechanical positioning or changer error"}, {0x3D,0x00,D|T|L|P|W|R|S|O|M|C|A|E|K,"Invalid bits in identify message"}, {0x3E,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit has not self-configured yet"}, {0x3E,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit failure"}, {0x3E,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Timeout on logical unit"}, {0x3E,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit failed self-test"}, {0x3E,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit unable to update self-test log"}, {0x3F,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Target operating conditions have changed"}, {0x3F,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Microcode has been changed"}, {0x3F,0x02,D|T|L|P|W|R|S|O|M|C|B|K,"Changed operating definition"}, {0x3F,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Inquiry data has changed"}, {0x3F,0x04,D|T|W|R|O|M|C|A|E|B|K,"Component device attached"}, {0x3F,0x05,D|T|W|R|O|M|C|A|E|B|K,"Device identifier changed"}, {0x3F,0x06,D|T|W|R|O|M|C|A|E|B,"Redundancy group created or modified"}, {0x3F,0x07,D|T|W|R|O|M|C|A|E|B,"Redundancy group deleted"}, {0x3F,0x08,D|T|W|R|O|M|C|A|E|B,"Spare created or modified"}, {0x3F,0x09,D|T|W|R|O|M|C|A|E|B,"Spare deleted"}, {0x3F,0x0A,D|T|W|R|O|M|C|A|E|B|K,"Volume set created or modified"}, {0x3F,0x0B,D|T|W|R|O|M|C|A|E|B|K,"Volume set deleted"}, {0x3F,0x0C,D|T|W|R|O|M|C|A|E|B|K,"Volume set deassigned"}, {0x3F,0x0D,D|T|W|R|O|M|C|A|E|B|K,"Volume set reassigned"}, {0x3F,0x0E,D|T|L|P|W|R|S|O|M|C|A|E,"Reported luns data has changed"}, {0x3F,0x10,D|T|W|R|O|M|B,"Medium loadable"}, {0x3F,0x11,D|T|W|R|O|M|B,"Medium auxiliary memory accessible"}, {0x40,0x00,D,"Ram failure (should use 40 nn)"}, /* * FIXME(eric) - need a way to represent wildcards here. */ {0x40,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Diagnostic failure on component nn (80h-ffh)"}, {0x41,0x00,D,"Data path failure (should use 40 nn)"}, {0x42,0x00,D,"Power-on or self-test failure (should use 40 nn)"}, {0x43,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Message error"}, {0x44,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Internal target failure"}, {0x45,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Select or reselect failure"}, {0x46,0x00,D|T|L|P|W|R|S|O|M|C|B|K,"Unsuccessful soft reset"}, {0x47,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Scsi parity error"}, {0x47,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Data phase CRC error detected"}, {0x47,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Scsi parity error detected during st data phase"}, {0x47,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Information unit CRC error detected"}, {0x47,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Asynchronous information protection error detected"}, {0x48,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Initiator detected error message received"}, {0x49,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid message error"}, {0x4A,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Command phase error"}, {0x4B,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Data phase error"}, {0x4C,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit failed self-configuration"}, /* * FIXME(eric) - need a way to represent wildcards here. */ {0x4D,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Tagged overlapped commands (nn = queue tag)"}, {0x4E,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Overlapped commands attempted"}, {0x50,0x00,T,"Write append error"}, {0x50,0x01,T,"Write append position error"}, {0x50,0x02,T,"Position error related to timing"}, {0x51,0x00,T|R|O,"Erase failure"}, {0x52,0x00,T,"Cartridge fault"}, {0x53,0x00,D|T|L|W|R|S|O|M|B|K,"Media load or eject failed"}, {0x53,0x01,T,"Unload tape failure"}, {0x53,0x02,D|T|W|R|O|M|B|K,"Medium removal prevented"}, {0x54,0x00,P,"Scsi to host system interface failure"}, {0x55,0x00,P,"System resource failure"}, {0x55,0x01,D|O|B|K,"System buffer full"}, {0x55,0x02,D|T|L|P|W|R|S|O|M|A|E|K,"Insufficient reservation resources"}, {0x55,0x03,D|T|L|P|W|R|S|O|M|C|A|E,"Insufficient resources"}, {0x55,0x04,D|T|L|P|W|R|S|O|M|A|E,"Insufficient registration resources"}, {0x57,0x00,R,"Unable to recover table-of-contents"}, {0x58,0x00,O,"Generation does not exist"}, {0x59,0x00,O,"Updated block read"}, {0x5A,0x00,D|T|L|P|W|R|S|O|M|B|K,"Operator request or state change input"}, {0x5A,0x01,D|T|W|R|O|M|B|K,"Operator medium removal request"}, {0x5A,0x02,D|T|W|R|O|A|B|K,"Operator selected write protect"}, {0x5A,0x03,D|T|W|R|O|A|B|K,"Operator selected write permit"}, {0x5B,0x00,D|T|L|P|W|R|S|O|M|K,"Log exception"}, {0x5B,0x01,D|T|L|P|W|R|S|O|M|K,"Threshold condition met"}, {0x5B,0x02,D|T|L|P|W|R|S|O|M|K,"Log counter at maximum"}, {0x5B,0x03,D|T|L|P|W|R|S|O|M|K,"Log list codes exhausted"}, {0x5C,0x00,D|O,"Rpl status change"}, {0x5C,0x01,D|O,"Spindles synchronized"}, {0x5C,0x02,D|O,"Spindles not synchronized"}, {0x5D,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Failure prediction threshold exceeded"}, {0x5D,0x01,R|B,"Media failure prediction threshold exceeded"}, {0x5D,0x02,R,"Logical unit failure prediction threshold exceeded"}, {0x5D,0x10,D|B,"Hardware impending failure general hard drive failure"}, {0x5D,0x11,D|B,"Hardware impending failure drive error rate too high"}, {0x5D,0x12,D|B,"Hardware impending failure data error rate too high"}, {0x5D,0x13,D|B,"Hardware impending failure seek error rate too high"}, {0x5D,0x14,D|B,"Hardware impending failure too many block reassigns"}, {0x5D,0x15,D|B,"Hardware impending failure access times too high"}, {0x5D,0x16,D|B,"Hardware impending failure start unit times too high"}, {0x5D,0x17,D|B,"Hardware impending failure channel parametrics"}, {0x5D,0x18,D|B,"Hardware impending failure controller detected"}, {0x5D,0x19,D|B,"Hardware impending failure throughput performance"}, {0x5D,0x1A,D|B,"Hardware impending failure seek time performance"}, {0x5D,0x1B,D|B,"Hardware impending failure spin-up retry count"}, {0x5D,0x1C,D|B,"Hardware impending failure drive calibration retry count"}, {0x5D,0x20,D|B,"Controller impending failure general hard drive failure"}, {0x5D,0x21,D|B,"Controller impending failure drive error rate too high"}, {0x5D,0x22,D|B,"Controller impending failure data error rate too high"}, {0x5D,0x23,D|B,"Controller impending failure seek error rate too high"}, {0x5D,0x24,D|B,"Controller impending failure too many block reassigns"}, {0x5D,0x25,D|B,"Controller impending failure access times too high"}, {0x5D,0x26,D|B,"Controller impending failure start unit times too high"}, {0x5D,0x27,D|B,"Controller impending failure channel parametrics"}, {0x5D,0x28,D|B,"Controller impending failure controller detected"}, {0x5D,0x29,D|B,"Controller impending failure throughput performance"}, {0x5D,0x2A,D|B,"Controller impending failure seek time performance"}, {0x5D,0x2B,D|B,"Controller impending failure spin-up retry count"}, {0x5D,0x2C,D|B,"Controller impending failure drive calibration retry count"}, {0x5D,0x30,D|B,"Data channel impending failure general hard drive failure"}, {0x5D,0x31,D|B,"Data channel impending failure drive error rate too high"}, {0x5D,0x32,D|B,"Data channel impending failure data error rate too high"}, {0x5D,0x33,D|B,"Data channel impending failure seek error rate too high"}, {0x5D,0x34,D|B,"Data channel impending failure too many block reassigns"}, {0x5D,0x35,D|B,"Data channel impending failure access times too high"}, {0x5D,0x36,D|B,"Data channel impending failure start unit times too high"}, {0x5D,0x37,D|B,"Data channel impending failure channel parametrics"}, {0x5D,0x38,D|B,"Data channel impending failure controller detected"}, {0x5D,0x39,D|B,"Data channel impending failure throughput performance"}, {0x5D,0x3A,D|B,"Data channel impending failure seek time performance"}, {0x5D,0x3B,D|B,"Data channel impending failure spin-up retry count"}, {0x5D,0x3C,D|B,"Data channel impending failure drive calibration retry count"}, {0x5D,0x40,D|B,"Servo impending failure general hard drive failure"}, {0x5D,0x41,D|B,"Servo impending failure drive error rate too high"}, {0x5D,0x42,D|B,"Servo impending failure data error rate too high"}, {0x5D,0x43,D|B,"Servo impending failure seek error rate too high"}, {0x5D,0x44,D|B,"Servo impending failure too many block reassigns"}, {0x5D,0x45,D|B,"Servo impending failure access times too high"}, {0x5D,0x46,D|B,"Servo impending failure start unit times too high"}, {0x5D,0x47,D|B,"Servo impending failure channel parametrics"}, {0x5D,0x48,D|B,"Servo impending failure controller detected"}, {0x5D,0x49,D|B,"Servo impending failure throughput performance"}, {0x5D,0x4A,D|B,"Servo impending failure seek time performance"}, {0x5D,0x4B,D|B,"Servo impending failure spin-up retry count"}, {0x5D,0x4C,D|B,"Servo impending failure drive calibration retry count"}, {0x5D,0x50,D|B,"Spindle impending failure general hard drive failure"}, {0x5D,0x51,D|B,"Spindle impending failure drive error rate too high"}, {0x5D,0x52,D|B,"Spindle impending failure data error rate too high"}, {0x5D,0x53,D|B,"Spindle impending failure seek error rate too high"}, {0x5D,0x54,D|B,"Spindle impending failure too many block reassigns"}, {0x5D,0x55,D|B,"Spindle impending failure access times too high"}, {0x5D,0x56,D|B,"Spindle impending failure start unit times too high"}, {0x5D,0x57,D|B,"Spindle impending failure channel parametrics"}, {0x5D,0x58,D|B,"Spindle impending failure controller detected"}, {0x5D,0x59,D|B,"Spindle impending failure throughput performance"}, {0x5D,0x5A,D|B,"Spindle impending failure seek time performance"}, {0x5D,0x5B,D|B,"Spindle impending failure spin-up retry count"}, {0x5D,0x5C,D|B,"Spindle impending failure drive calibration retry count"}, {0x5D,0x60,D|B,"Firmware impending failure general hard drive failure"}, {0x5D,0x61,D|B,"Firmware impending failure drive error rate too high"}, {0x5D,0x62,D|B,"Firmware impending failure data error rate too high"}, {0x5D,0x63,D|B,"Firmware impending failure seek error rate too high"}, {0x5D,0x64,D|B,"Firmware impending failure too many block reassigns"}, {0x5D,0x65,D|B,"Firmware impending failure access times too high"}, {0x5D,0x66,D|B,"Firmware impending failure start unit times too high"}, {0x5D,0x67,D|B,"Firmware impending failure channel parametrics"}, {0x5D,0x68,D|B,"Firmware impending failure controller detected"}, {0x5D,0x69,D|B,"Firmware impending failure throughput performance"}, {0x5D,0x6A,D|B,"Firmware impending failure seek time performance"}, {0x5D,0x6B,D|B,"Firmware impending failure spin-up retry count"}, {0x5D,0x6C,D|B,"Firmware impending failure drive calibration retry count"}, {0x5D,0xFF,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Failure prediction threshold exceeded (false)"}, {0x5E,0x00,D|T|L|P|W|R|S|O|C|A|K,"Low power condition on"}, {0x5E,0x01,D|T|L|P|W|R|S|O|C|A|K,"Idle condition activated by timer"}, {0x5E,0x02,D|T|L|P|W|R|S|O|C|A|K,"Standby condition activated by timer"}, {0x5E,0x03,D|T|L|P|W|R|S|O|C|A|K,"Idle condition activated by command"}, {0x5E,0x04,D|T|L|P|W|R|S|O|C|A|K,"Standby condition activated by command"}, {0x5E,0x41,B,"Power state change to active"}, {0x5E,0x42,B,"Power state change to idle"}, {0x5E,0x43,B,"Power state change to standby"}, {0x5E,0x45,B,"Power state change to sleep"}, {0x5E,0x47,B|K,"Power state change to device control"}, {0x60,0x00,S,"Lamp failure"}, {0x61,0x00,S,"Video acquisition error"}, {0x61,0x01,S,"Unable to acquire video"}, {0x61,0x02,S,"Out of focus"}, {0x62,0x00,S,"Scan head positioning error"}, {0x63,0x00,R,"End of user area encountered on this track"}, {0x63,0x01,R,"Packet does not fit in available space"}, {0x64,0x00,R,"Illegal mode for this track"}, {0x64,0x01,R,"Invalid packet size"}, {0x65,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Voltage fault"}, {0x66,0x00,S,"Automatic document feeder cover up"}, {0x66,0x01,S,"Automatic document feeder lift up"}, {0x66,0x02,S,"Document jam in automatic document feeder"}, {0x66,0x03,S,"Document miss feed automatic in document feeder"}, {0x67,0x00,A,"Configuration failure"}, {0x67,0x01,A,"Configuration of incapable logical units failed"}, {0x67,0x02,A,"Add logical unit failed"}, {0x67,0x03,A,"Modification of logical unit failed"}, {0x67,0x04,A,"Exchange of logical unit failed"}, {0x67,0x05,A,"Remove of logical unit failed"}, {0x67,0x06,A,"Attachment of logical unit failed"}, {0x67,0x07,A,"Creation of logical unit failed"}, {0x67,0x08,A,"Assign failure occurred"}, {0x67,0x09,A,"Multiply assigned logical unit"}, {0x68,0x00,A,"Logical unit not configured"}, {0x69,0x00,A,"Data loss on logical unit"}, {0x69,0x01,A,"Multiple logical unit failures"}, {0x69,0x02,A,"Parity/data mismatch"}, {0x6A,0x00,A,"Informational,refer to log"}, {0x6B,0x00,A,"State change has occurred"}, {0x6B,0x01,A,"Redundancy level got better"}, {0x6B,0x02,A,"Redundancy level got worse"}, {0x6C,0x00,A,"Rebuild failure occurred"}, {0x6D,0x00,A,"Recalculate failure occurred"}, {0x6E,0x00,A,"Command to logical unit failed"}, {0x6F,0x00,R,"Copy protection key exchange failure - authentication failure"}, {0x6F,0x01,R,"Copy protection key exchange failure - key not present"}, {0x6F,0x02,R,"Copy protection key exchange failure - key not established"}, {0x6F,0x03,R,"Read of scrambled sector without authentication"}, {0x6F,0x04,R,"Media region code is mismatched to logical unit region"}, {0x6F,0x05,R,"Drive region must be permanent/region reset count error"}, /* * FIXME(eric) - need a way to represent wildcards here. */ {0x70,0x00,T,"Decompression exception short algorithm id of nn"}, {0x71,0x00,T,"Decompression exception long algorithm id"}, {0x72,0x00,R,"Session fixation error"}, {0x72,0x01,R,"Session fixation error writing lead-in"}, {0x72,0x02,R,"Session fixation error writing lead-out"}, {0x72,0x03,R,"Session fixation error - incomplete track in session"}, {0x72,0x04,R,"Empty or partially written reserved track"}, {0x72,0x05,R,"No more track reservations allowed"}, {0x73,0x00,R,"Cd control error"}, {0x73,0x01,R,"Power calibration area almost full"}, {0x73,0x02,R,"Power calibration area is full"}, {0x73,0x03,R,"Power calibration area error"}, {0x73,0x04,R,"Program memory area update failure"}, {0x73,0x05,R,"Program memory area is full"}, {0x73,0x06,R,"RMA/PMA is full"}, {0, 0, 0, NULL} }; #endif #if (CONSTANTS & CONST_SENSE) static const char *snstext[] = { "None", /* There is no sense information */ "Recovered Error", /* The last command completed successfully but used error correction */ "Not Ready", /* The addressed target is not ready */ "Medium Error", /* Data error detected on the medium */ "Hardware Error", /* Controller or device failure */ "Illegal Request", "Unit Attention", /* Removable medium was changed, or the target has been reset */ "Data Protect", /* Access to the data is blocked */ "Blank Check", /* Reached unexpected written or unwritten region of the medium */ "Key=9", /* Vendor specific */ "Copy Aborted", /* COPY or COMPARE was aborted */ "Aborted Command", /* The target aborted the command */ "Equal", /* A SEARCH DATA command found data equal */ "Volume Overflow", /* Medium full with still data to be written */ "Miscompare", /* Source data and data on the medium do not agree */ "Key=15" /* Reserved */ }; #endif /* Print sense information */ static void print_sense_internal(const char * devclass, const unsigned char * sense_buffer, kdev_t dev) { int i, s; int sense_class, valid, code, info; const char * error = NULL; sense_class = (sense_buffer[0] >> 4) & 0x07; code = sense_buffer[0] & 0xf; valid = sense_buffer[0] & 0x80; if (sense_class == 7) { /* extended sense data */ s = sense_buffer[7] + 8; if(s > SCSI_SENSE_BUFFERSIZE) s = SCSI_SENSE_BUFFERSIZE; info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) | (sense_buffer[5] << 8) | sense_buffer[6]); if (info || valid) { printk("Info fld=0x%x", info); if (!valid) /* info data not according to standard */ printk(" (nonstd)"); printk(", "); } if (sense_buffer[2] & 0x80) printk( "FMK "); /* current command has read a filemark */ if (sense_buffer[2] & 0x40) printk( "EOM "); /* end-of-medium condition exists */ if (sense_buffer[2] & 0x20) printk( "ILI "); /* incorrect block length requested */ switch (code) { case 0x0: error = "Current"; /* error concerns current command */ break; case 0x1: error = "Deferred"; /* error concerns some earlier command */ /* e.g., an earlier write to disk cache succeeded, but now the disk discovers that it cannot write the data */ break; default: error = "Invalid"; } printk("%s ", error); #if (CONSTANTS & CONST_SENSE) printk( "%s%s: sense key %s\n", devclass, kdevname(dev), snstext[sense_buffer[2] & 0x0f]); #else printk("%s%s: sns = %2x %2x\n", devclass, kdevname(dev), sense_buffer[0], sense_buffer[2]); #endif /* Check to see if additional sense information is available */ if(sense_buffer[7] + 7 < 13 || (sense_buffer[12] == 0 && sense_buffer[13] == 0)) goto done; #if (CONSTANTS & CONST_XSENSE) for(i=0; additional[i].text; i++) if(additional[i].code1 == sense_buffer[12] && additional[i].code2 == sense_buffer[13]) printk("Additional sense indicates %s\n", additional[i].text); for(i=0; additional2[i].text; i++) if(additional2[i].code1 == sense_buffer[12] && additional2[i].code2_min >= sense_buffer[13] && additional2[i].code2_max <= sense_buffer[13]) { printk("Additional sense indicates "); printk(additional2[i].text, sense_buffer[13]); printk("\n"); }; #else printk("ASC=%2x ASCQ=%2x\n", sense_buffer[12], sense_buffer[13]); #endif } else { /* non-extended sense data */ /* * Standard says: * sense_buffer[0] & 0200 : address valid * sense_buffer[0] & 0177 : vendor-specific error code * sense_buffer[1] & 0340 : vendor-specific * sense_buffer[1..3] : 21-bit logical block address */ #if (CONSTANTS & CONST_SENSE) if (sense_buffer[0] < 15) printk("%s%s: old sense key %s\n", devclass, kdevname(dev), snstext[sense_buffer[0] & 0x0f]); else #endif printk("%s%s: sns = %2x %2x\n", devclass, kdevname(dev), sense_buffer[0], sense_buffer[2]); printk("Non-extended sense class %d code 0x%0x\n", sense_class, code); s = 4; } done: #if !(CONSTANTS & CONST_SENSE) printk("Raw sense data:"); for (i = 0; i < s; ++i) printk("0x%02x ", sense_buffer[i]); printk("\n"); #endif return; } void print_sense(const char * devclass, Scsi_Cmnd * SCpnt) { print_sense_internal(devclass, SCpnt->sense_buffer, SCpnt->request.rq_dev); } void print_req_sense(const char * devclass, Scsi_Request * SRpnt) { print_sense_internal(devclass, SRpnt->sr_sense_buffer, SRpnt->sr_request.rq_dev); } #if (CONSTANTS & CONST_MSG) static const char *one_byte_msgs[] = { /* 0x00 */ "Command Complete", NULL, "Save Pointers", /* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error", /* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error", /* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag", /* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue", /* 0x0f */ "Initiate Recovery", "Release Recovery" }; #define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *)) static const char *two_byte_msgs[] = { /* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag" /* 0x23 */ "Ignore Wide Residue" }; #define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) static const char *extended_msgs[] = { /* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request", /* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request" }; #define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) #endif /* (CONSTANTS & CONST_MSG) */ int print_msg (const unsigned char *msg) { int len = 0, i; if (msg[0] == EXTENDED_MESSAGE) { len = 3 + msg[1]; #if (CONSTANTS & CONST_MSG) if (msg[2] < NO_EXTENDED_MSGS) printk ("%s ", extended_msgs[msg[2]]); else printk ("Extended Message, reserved code (0x%02x) ", (int) msg[2]); switch (msg[2]) { case EXTENDED_MODIFY_DATA_POINTER: printk("pointer = %d", (int) (msg[3] << 24) | (msg[4] << 16) | (msg[5] << 8) | msg[6]); break; case EXTENDED_SDTR: printk("period = %d ns, offset = %d", (int) msg[3] * 4, (int) msg[4]); break; case EXTENDED_WDTR: printk("width = 2^%d bytes", msg[3]); break; default: for (i = 2; i < len; ++i) printk("%02x ", msg[i]); } #else for (i = 0; i < len; ++i) printk("%02x ", msg[i]); #endif /* Identify */ } else if (msg[0] & 0x80) { #if (CONSTANTS & CONST_MSG) printk("Identify disconnect %sallowed %s %d ", (msg[0] & 0x40) ? "" : "not ", (msg[0] & 0x20) ? "target routine" : "lun", msg[0] & 0x7); #else printk("%02x ", msg[0]); #endif len = 1; /* Normal One byte */ } else if (msg[0] < 0x1f) { #if (CONSTANTS & CONST_MSG) if (msg[0] < NO_ONE_BYTE_MSGS) printk(one_byte_msgs[msg[0]]); else printk("reserved (%02x) ", msg[0]); #else printk("%02x ", msg[0]); #endif len = 1; /* Two byte */ } else if (msg[0] <= 0x2f) { #if (CONSTANTS & CONST_MSG) if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS) printk("%s %02x ", two_byte_msgs[msg[0] - 0x20], msg[1]); else printk("reserved two byte (%02x %02x) ", msg[0], msg[1]); #else printk("%02x %02x", msg[0], msg[1]); #endif len = 2; } else #if (CONSTANTS & CONST_MSG) printk(reserved); #else printk("%02x ", msg[0]); #endif return len; } void print_Scsi_Cmnd (Scsi_Cmnd *cmd) { printk("scsi%d : destination target %d, lun %d\n", cmd->host->host_no, cmd->target, cmd->lun); printk(" command = "); print_command (cmd->cmnd); } #if (CONSTANTS & CONST_HOST) static const char * hostbyte_table[]={ "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", "DID_PASSTHROUGH", "DID_SOFT_ERROR", NULL}; void print_hostbyte(int scsiresult) { static int maxcode=0; int i; if(!maxcode) { for(i=0;hostbyte_table[i];i++) ; maxcode=i-1; } printk("Hostbyte=0x%02x",host_byte(scsiresult)); if(host_byte(scsiresult)>maxcode) { printk("is invalid "); return; } printk("(%s) ",hostbyte_table[host_byte(scsiresult)]); } #else void print_hostbyte(int scsiresult) { printk("Hostbyte=0x%02x ",host_byte(scsiresult)); } #endif #if (CONSTANTS & CONST_DRIVER) static const char * driverbyte_table[]={ "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR", "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD",NULL }; static const char * driversuggest_table[]={"SUGGEST_OK", "SUGGEST_RETRY", "SUGGEST_ABORT", "SUGGEST_REMAP", "SUGGEST_DIE", unknown,unknown,unknown, "SUGGEST_SENSE",NULL}; void print_driverbyte(int scsiresult) { static int driver_max=0,suggest_max=0; int i,dr=driver_byte(scsiresult)&DRIVER_MASK, su=(driver_byte(scsiresult)&SUGGEST_MASK)>>4; if(!driver_max) { for(i=0;driverbyte_table[i];i++) ; driver_max=i; for(i=0;driversuggest_table[i];i++) ; suggest_max=i; } printk("Driverbyte=0x%02x",driver_byte(scsiresult)); printk("(%s,%s) ", dr