/* * This file contains quirk handling code for ISAPnP devices * Some devices do not report all their resources, and need to have extra * resources added. This is most easily accomplished at initialisation time * when building up the resource structure for the first time. * * Copyright (c) 2000 Peter Denison * * Heavily based on PCI quirks handling which is * * Copyright (c) 1999 Martin Mares */ #include #include #include #include #include #include #if 0 #define ISAPNP_DEBUG #endif static void __init quirk_awe32_resources(struct pci_dev *dev) { struct isapnp_port *port, *port2, *port3; struct isapnp_resources *res = dev->sysdata; /* * Unfortunately the isapnp_add_port_resource is too tightly bound * into the PnP discovery sequence, and cannot be used. Link in the * two extra ports (at offset 0x400 and 0x800 from the one given) by * hand. */ for ( ; res ; res = res->alt ) { port2 = isapnp_alloc(sizeof(struct isapnp_port)); port3 = isapnp_alloc(sizeof(struct isapnp_port)); if (!port2 || !port3) return; port = res->port; memcpy(port2, port, sizeof(struct isapnp_port)); memcpy(port3, port, sizeof(struct isapnp_port)); port->next = port2; port2->next = port3; port2->min += 0x400; port2->max += 0x400; port3->min += 0x800; port3->max += 0x800; } printk(KERN_INFO "isapnp: AWE32 quirk - adding two ports\n"); } static void __init quirk_cmi8330_resources(struct pci_dev *dev) { struct isapnp_resources *res = dev->sysdata; for ( ; res ; res = res->alt ) { struct isapnp_irq *irq; struct isapnp_dma *dma; for( irq = res->irq; irq; irq = irq->next ) // Valid irqs are 5, 7, 10 irq->map = 0x04A0; // 0000 0100 1010 0000 for( dma = res->dma; dma; dma = dma->next ) // Valid 8bit dma channels are 1,3 if( ( dma->flags & IORESOURCE_DMA_TYPE_MASK ) == IORESOURCE_DMA_8BIT ) dma->map = 0x000A; } printk(KERN_INFO "isapnp: CMI8330 quirk - fixing interrupts and dma\n"); } static void __init quirk_sb16audio_resources(struct pci_dev *dev) { struct isapnp_port *port; struct isapnp_resources *res = dev->sysdata; int changed = 0; /* * The default range on the mpu port for these devices is 0x388-0x388. * Here we increase that range so that two such cards can be * auto-configured. */ for( ; res ; res = res->alt ) { port = res->port; if(!port) continue; port = port->next; if(!port) continue; port = port->next; if(!port) continue; if(port->min != port->max) continue; port->max += 0x70; changed = 1; } if(changed) printk(KERN_INFO "isapnp: SB audio device quirk - increasing port range\n"); return; } /* * ISAPnP Quirks * Cards or devices that need some tweaking due to broken hardware */ static struct isapnp_fixup isapnp_fixups[] __initdata = { /* Soundblaster awe io port quirk */ { ISAPNP_VENDOR('C','T','L'), ISAPNP_DEVICE(0x0021), quirk_awe32_resources }, { ISAPNP_VENDOR('C','T','L'), ISAPNP_DEVICE(0x0022), quirk_awe32_resources }, { ISAPNP_VENDOR('C','T','L'), ISAPNP_DEVICE(0x0023), quirk_awe32_resources }, /* CMI 8330 interrupt and dma fix */ { ISAPNP_VENDOR('@','X','@'), ISAPNP_DEVICE(0x0001), quirk_cmi8330_resources }, /* Soundblaster audio device io port range quirk */ { ISAPNP_VENDOR('C','T','L'), ISAPNP_DEVICE(0x0001), quirk_sb16audio_resources }, { ISAPNP_VENDOR('C','T','L'), ISAPNP_DEVICE(0x0031), quirk_sb16audio_resources }, { ISAPNP_VENDOR('C','T','L'), ISAPNP_DEVICE(0x0041), quirk_sb16audio_resources }, { ISAPNP_VENDOR('C','T','L'), ISAPNP_DEVICE(0x0042), quirk_sb16audio_resources }, { ISAPNP_VENDOR('C','T','L'), ISAPNP_DEVICE(0x0043), quirk_sb16audio_resources }, { ISAPNP_VENDOR('C','T','L'), ISAPNP_DEVICE(0x0044), quirk_sb16audio_resources }, { ISAPNP_VENDOR('C','T','L'), ISAPNP_DEVICE(0x0045), quirk_sb16audio_resources }, { 0 } }; void isapnp_fixup_device(struct pci_dev *dev) { int i = 0; while (isapnp_fixups[i].vendor != 0) { if ((isapnp_fixups[i].vendor == dev->vendor) && (isapnp_fixups[i].device == dev->device)) { #ifdef ISAPNP_DEBUG printk(KERN_DEBUG "isapnp: Calling quirk for %02x:%02x\n", dev->bus->number, dev->devfn); #endif isapnp_fixups[i].quirk_function(dev); } i++; } }