/* * Copyright (C) 2000, 2001 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* * Driver support for the on-chip sb1250 dual-channel serial port, * running in asynchronous mode. Also, support for doing a serial console * on one of those ports * * The non-console part of this code is based heavily on the serial_21285.c * driver also in this directory. See tty_driver.h for a description of some * of the driver functions, though it (like most of the inline code documentation :) * is a bit out of date. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Toggle spewing of debugging output */ #undef DUART_SPEW #define DEFAULT_CFLAGS (CS8 | B115200) /* Still not sure what the termios structures set up here are for, but we have to supply pointers to them to register the tty driver */ static struct tty_driver sb1250_duart_driver, sb1250_duart_callout_driver; static int ref_count; static struct tty_struct *duart_table[2]; static struct termios *duart_termios[2]; static struct termios *duart_termios_locked[2]; /* This lock protects both the open flags for all the uart states as well as the reference count for the module */ static spinlock_t open_lock = SPIN_LOCK_UNLOCKED; /* Protect the writing stuff from contention */ //static spinlock_t console_lock = SPIN_LOCK_UNLOCKED; /* Bit fields of flags in the flags field below */ #define SD_WRITE_WAKE 0x000000001 typedef struct { struct tty_struct *tty; unsigned char outp_buf[CONFIG_SB1250_DUART_OUTPUT_BUF_SIZE]; unsigned int outp_head; unsigned int outp_tail; unsigned int outp_count; spinlock_t outp_lock; unsigned int outp_stopped; unsigned int open; unsigned long flags; unsigned int last_cflags; } uart_state_t; static uart_state_t uart_states[2] = { [0 ... 1] = { tty: 0, outp_head: 0, outp_tail: 0, outp_lock: SPIN_LOCK_UNLOCKED, outp_count: 0, open: 0, flags: 0, last_cflags: 0, }}; /* * Inline functions local to this module */ /* * Mask out the passed interrupt lines at the duart level. This should be * called while holding the associated outp_lock. */ static inline void duart_mask_ints(unsigned int line, unsigned int mask) { u64 tmp; tmp = in64(IO_SPACE_BASE | A_DUART_IMRREG(line)); tmp &= ~mask; out64(tmp, IO_SPACE_BASE | A_DUART_IMRREG(line)); } /* Unmask the passed interrupt lines at the duart level */ static inline void duart_unmask_ints(unsigned int line, unsigned int mask) { u64 tmp; tmp = in64(IO_SPACE_BASE | A_DUART_IMRREG(line)); tmp |= mask; out64(tmp, IO_SPACE_BASE | A_DUART_IMRREG(line)); } static inline unsigned long get_status_reg(unsigned int line) { return in64(IO_SPACE_BASE | A_DUART_CHANREG(line, R_DUART_STATUS)); } /* Derive which uart a call is for from the passed tty line. */ static inline unsigned int get_line(struct tty_struct *tty) { unsigned int line = MINOR(tty->device) - 64; if (line > 1) printk(KERN_CRIT "Invalid line\n"); return line; } #define MIN(a, b) (((a)<(b))?(a):(b)) /* * Generic interrupt handler for both channels. dev_id is a pointer * to the proper uart_states structure, so from that we can derive * which port interrupted */ static void duart_int(int irq, void *dev_id, struct pt_regs *regs) { unsigned int line; uart_state_t *us = (uart_state_t *)dev_id; line = us-uart_states; #ifdef DUART_SPEW // setleds("INT!"); printk("DUART INT\n"); #endif /* We could query the ISR to figure out why we are here, but since we are here, we may as well just take care of both rx and tx */ spin_lock(&us->outp_lock); if (get_status_reg(line) & M_DUART_RX_RDY) { do { unsigned int status = get_status_reg(line); unsigned int ch = in64(IO_SPACE_BASE | A_DUART_CHANREG(line, R_DUART_RX_HOLD)); unsigned int flag = 0; if (status & 0x10) { tty_insert_flip_char(us->tty, 0, TTY_OVERRUN); } if (status & 0x20) { printk("Parity error!\n"); flag = TTY_PARITY; } else if (status & 0x40) { printk("Frame error!\n"); flag = TTY_FRAME; } tty_insert_flip_char(us->tty, ch, flag); } while (get_status_reg(line) & M_DUART_RX_RDY); tty_flip_buffer_push(us->tty); } if ((get_status_reg(line) & M_DUART_TX_RDY) && us->outp_count) { do { out64(us->outp_buf[us->outp_head], IO_SPACE_BASE | A_DUART_CHANREG(line, R_DUART_TX_HOLD)); us->outp_head = (us->outp_head + 1) & (CONFIG_SB1250_DUART_OUTPUT_BUF_SIZE-1); us->outp_count--; } while ((get_status_reg(line) & M_DUART_TX_RDY) && us->outp_count); if (us->open && (us->flags & SD_WRITE_WAKE) && (us->outp_count < (CONFIG_SB1250_DUART_OUTPUT_BUF_SIZE/2))) { /* We told the discipline at one point that we had no space, so it went to sleep. Wake it up when we hit half empty */ wake_up_interruptible(&us->tty->write_wait); } if (!us->outp_count) { duart_mask_ints(line, M_DUART_IMR_TX); } } spin_unlock(&us->outp_lock); } /* * Actual driver functions */ /* Return the number of characters we can accomodate in a write at this instant */ static int duart_write_room(struct tty_struct *tty) { unsigned long flags; int retval; uart_state_t *us = &uart_states[get_line(tty)]; spin_lock_irqsave(&us->outp_lock, flags); retval = CONFIG_SB1250_DUART_OUTPUT_BUF_SIZE - uart_states[get_line(tty)].outp_count; if (!retval) { us->flags |= SD_WRITE_WAKE; } spin_unlock_irqrestore(&us->outp_lock, flags); #ifdef DUART_SPEW printk("duart_write_room called, returning %i\n", retval); #endif return retval; } /* memcpy the data from src to destination, but take extra care if the data is coming from user space */ static inline int copy_buf(char *dest, const char *src, int size, int from_user) { if (from_user) { (void) copy_from_user(dest, src, size); } else { memcpy(dest, src, size); } return size; } /* Buffer up to count characters from buf to be written. If we don't have other characters buffered, enable the tx interrupt to start sending */ static int duart_write(struct tty_struct * tty, int from_user, const unsigned char *buf, int count) { uart_state_t *us; unsigned long flags; unsigned int line; int chars_written = 0; if (from_user && verify_area(VERIFY_READ, buf, count)) { return -EINVAL; } #ifdef DUART_SPEW printk("duart_write called for %i chars by %i (%s)\n", count, current->pid, current->comm); #endif line = get_line(tty); us = &uart_states[line]; spin_lock_irqsave(&us->outp_lock, flags); if (!count || (us->outp_count == CONFIG_SB1250_DUART_OUTPUT_BUF_SIZE)) { spin_unlock_irqrestore(&us->outp_lock, flags); return 0; } if (us->outp_tail < us->outp_head) { /* Straightforward case; copy from tail to head */ chars_written += copy_buf(us->outp_buf + us->outp_tail, buf, MIN(count, us->outp_head - us->outp_tail), from_user); } else { /* Copy from tail to end of buffer, wrap around and then copy to head */ chars_written += copy_buf(us->outp_buf + us->outp_tail, buf, MIN(CONFIG_SB1250_DUART_OUTPUT_BUF_SIZE - us->outp_tail, count), from_user); if (chars_written < count) { chars_written += copy_buf(us->outp_buf, buf + chars_written, MIN(us->outp_head, count - chars_written), from_user); } } us->outp_tail = (us->outp_tail + chars_written) &(CONFIG_SB1250_DUART_OUTPUT_BUF_SIZE-1); if (!(us->outp_count || us->outp_stopped)) { duart_unmask_ints(line, M_DUART_IMR_TX); } us->outp_count += chars_written; spin_unlock_irqrestore(&us->outp_lock, flags); return chars_written; } /* Buffer one character to be written. If there's not room for it, just drop it on the floor. This is used for echo, among other things */ static void duart_put_char(struct tty_struct *tty, u_char ch) { unsigned long flags; unsigned int line = get_line(tty); uart_state_t *us = &uart_states[line]; #ifdef DUART_SPEW printk("duart_put_char called. Char is %x (%c)\n", (int)ch, ch); #endif spin_lock_irqsave(&us->outp_lock, flags); if (us->outp_count != CONFIG_SB1250_DUART_OUTPUT_BUF_SIZE) { us->outp_buf[us->outp_tail] = ch; us->outp_tail = (us->outp_tail + 1) &(CONFIG_SB1250_DUART_OUTPUT_BUF_SIZE-1); if (!(us->outp_count || us->outp_stopped)) { duart_unmask_ints(line, M_DUART_IMR_TX); } us->outp_count++; } spin_unlock_irqrestore(&us->outp_lock, flags); } /* Return the number of characters in the output buffer that have yet to be written */ static int duart_chars_in_buffer(struct tty_struct *tty) { int retval; unsigned long flags; uart_state_t *us = &uart_states[get_line(tty)]; spin_lock_irqsave(&us->outp_lock, flags); retval = us->outp_count; if (retval) { us->flags |= SD_WRITE_WAKE; } spin_unlock_irqrestore(&us->outp_lock, flags); #ifdef DUART_SPEW printk("duart_chars_in_buffer returning %i\n", retval); #endif return retval; } /* Kill everything we haven't yet shoved into the FIFO. Turn off the transmit interrupt since we've nothing more to transmit */ static void duart_flush_buffer(struct tty_struct *tty) { unsigned long flags; unsigned int line = get_line(tty); uart_state_t *us = &uart_states[get_line(tty)]; #ifdef DUART_SPEW printk("duart_flush_buffer called\n"); #endif duart_mask_ints(line, M_DUART_IMR_TX); spin_lock_irqsave(&us->outp_lock, flags); us->outp_head = us->outp_tail = us->outp_count = 0; if (us->flags & SD_WRITE_WAKE) { wake_up_interruptible(&us->tty->write_wait); } spin_unlock_irqrestore(&us->outp_lock, flags); } /* See sb1250 user manual for details on these registers */ static inline void duart_set_cflag(unsigned int line, unsigned int cflag) { unsigned int mode_reg1 = 0, mode_reg2 = 0; unsigned int clk_divisor; switch (cflag & CSIZE) { case CS7: mode_reg1 |= V_DUART_BITS_PER_CHAR_7; default: /* We don't handle CS5 or CS6...is there a way we're supposed to flag this? right now we just force them to CS8 */ mode_reg1 |= 0x0; break; } if (cflag & CSTOPB) { mode_reg2 |= M_DUART_STOP_BIT_LEN_2; /* XXX was: 0x4; */ } if (!(cflag & PARENB)) { mode_reg1 |= V_DUART_PARITY_MODE_NONE; /* XXX was: 0x8; */ } if (cflag & PARODD) { mode_reg1 |= M_DUART_PARITY_TYPE_ODD; } /* Formula for this is (5000000/baud)-1, but we saturate at 12 bits, which means we can't actually do anything less that 1200 baud */ switch (cflag & CBAUD) { case B200: case B300: case B1200: clk_divisor = 4095; break; case B1800: clk_divisor = 2776; break; case B2400: clk_divisor = 2082; break; case B4800: clk_divisor = 1040; break; default: case B9600: clk_divisor = 519; break; case B19200: clk_divisor = 259; break; case B38400: clk_divisor = 129; break; case B57600: clk_divisor = 85; break; case B115200: clk_divisor = 42; break; } out64(mode_reg1, IO_SPACE_BASE | A_DUART_CHANREG(line, R_DUART_MODE_REG_1)); out64(mode_reg2, IO_SPACE_BASE | A_DUART_CHANREG(line, R_DUART_MODE_REG_2)); out64(clk_divisor, IO_SPACE_BASE | A_DUART_CHANREG(line, R_DUART_CLK_SEL)); uart_states[line].last_cflags = cflag; } /* Handle notification of a termios change. */ static void duart_set_termios(struct tty_struct *tty, struct termios *old) { #ifdef DUART_SPEW printk("duart_set_termios called by %i (%s)\n", current->pid, current->comm); #endif if (old && tty->termios->c_cflag == old->c_cflag) return; duart_set_cflag(get_line(tty), tty->termios->c_cflag); } /* Stop pushing stuff into the fifo, now. Do the mask under the outp_lock to avoid races involving turning the interrupt line on/off */ static void duart_stop(struct tty_struct *tty) { unsigned long flags; unsigned int line = get_line(tty); uart_state_t *us = &uart_states[line]; #ifdef DUART_SPEW printk("duart_stop called\n"); #endif spin_lock_irqsave(&us->outp_lock, flags); duart_mask_ints(get_line(tty), M_DUART_IMR_TX); us->outp_stopped = 1; spin_unlock_irqrestore(&us->outp_lock, flags); } static int duart_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { /* if (serial_paranoia_check(info, tty->device, "rs_ioctl")) return -ENODEV;*/ switch (cmd) { case TIOCMGET: printk("Ignoring TIOCMGET\n"); break; case TIOCMBIS: printk("Ignoring TIOCMBIS\n"); break; case TIOCMBIC: printk("Ignoring TIOCMBIC\n"); break; case TIOCMSET: printk("Ignoring TIOCMSET\n"); break; case TIOCGSERIAL: printk("Ignoring TIOCGSERIAL\n"); break; case TIOCSSERIAL: printk("Ignoring TIOCSSERIAL\n"); break; case TIOCSERCONFIG: printk("Ignoring TIOCSERCONFIG\n"); break; case TIOCSERGETLSR: /* Get line status register */ printk("Ignoring TIOCSERGETLSR\n"); break; case TIOCSERGSTRUCT: printk("Ignoring TIOCSERGSTRUCT\n"); break; case TIOCMIWAIT: printk("Ignoring TIOCMIWAIT\n"); break; case TIOCGICOUNT: printk("Ignoring TIOCGICOUNT\n"); break; case TIOCSERGWILD: printk("Ignoring TIOCSERGWILD\n"); break; case TIOCSERSWILD: printk("Ignoring TIOCSERSWILD\n"); break; default: break; } // printk("Ignoring IOCTL %x from pid %i (%s)\n", cmd, current->pid, current->comm); return -ENOIOCTLCMD; #if 0 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { if (tty->flags & (1 << TTY_IO_ERROR)) return -EIO; } switch (cmd) { case TIOCMGET: case TIOCMBIS: case TIOCMBIC: case TIOCMSET: case TIOCGSERIAL: case TIOCSSERIAL: case TIOCSERCONFIG: case TIOCSERGETLSR: /* Get line status register */ case TIOCSERGSTRUCT: case TIOCMIWAIT: case TIOCGICOUNT: case TIOCSERGWILD: case TIOCSERSWILD: /* XXX Implement me! */ printk("IOCTL needs implementing: %x\n", cmd); default: printk("Unknown ioctl: %x\n", cmd); } #endif return 0; } /* Stop pushing stuff into the fifo, now. Do the mask under the outp_lock to avoid races involving turning the interrupt line on/off */ static void duart_start(struct tty_struct *tty) { unsigned long flags; unsigned int line = get_line(tty); uart_state_t *us = &uart_states[line]; #ifdef DUART_SPEW printk("duart_start called\n"); #endif spin_lock_irqsave(&us->outp_lock, flags); if (us->outp_count) { duart_unmask_ints(get_line(tty), M_DUART_IMR_TX); } us->outp_stopped = 0; spin_unlock_irqrestore(&us->outp_lock, flags); } /* Not sure on the semantics of this; are we supposed to wait until the stuff already in the hardware FIFO drains, or are we supposed to wait until we've drained the output buffer, too? I'm assuming the former, 'cause thats what the other drivers seem to assume */ static void duart_wait_until_sent(struct tty_struct *tty, int timeout) { unsigned long target_time; unsigned int line; uart_state_t *us; #ifdef DUART_SPEW printk("duart_wait_until_sent(%d)+\n", timeout); #endif target_time = jiffies + timeout; line = get_line(tty); us = &uart_states[line]; while (!(get_status_reg(line) & M_DUART_TX_EMT) && (jiffies < target_time)) { schedule_timeout(1); } #ifdef DUART_SPEW printk("duart_wait_until_sent()-\n"); #endif } /* * Open a tty line. Note that this can be called multiple times, so ->open can * be >1. Only set up the tty struct if this is a "new" open, e.g. ->open was * zero */ static int duart_open(struct tty_struct *tty, struct file *filp) { unsigned long flags; unsigned int line; uart_state_t *us; MOD_INC_USE_COUNT; #ifndef CONFIG_SIBYTE_SB1250_DUART_NO_PORT_1 if (get_line(tty) > 1) #else if (get_line(tty) > 0) #endif { MOD_DEC_USE_COUNT; return -ENODEV; } #ifdef DUART_SPEW printk("duart_open called by %i (%s), tty is %p, rw is %p, ww is %p\n", current->pid, current->comm, tty, tty->read_wait, tty->write_wait); #endif line = get_line(tty); tty->driver_data = NULL; us = &uart_states[line]; spin_lock_irqsave(&open_lock, flags); if (!us->open) { us->tty = tty; us->tty->termios->c_cflag = us->last_cflags; } us->open++; #ifdef FORCED_INPUT if (!line && (us->open == 1)) { next_inp = inp_cmds; init_timer(&inp_timer); inp_timer.expires = jiffies + 20; inp_timer.data = 0; inp_timer.function = stuff_char; stuff_char_tty = tty; add_timer(&inp_timer); } #endif duart_unmask_ints(line, M_DUART_IMR_RX); spin_unlock_irqrestore(&open_lock, flags); return 0; } /* * Close a reference count out. If reference count hits zero, null the * tty, kill the interrupts. The tty_io driver is responsible for making * sure we've cleared out our internal buffers before calling close() */ static void duart_close(struct tty_struct *tty, struct file *filp) { unsigned long flags; unsigned int line = get_line(tty); uart_state_t *us = &uart_states[line]; #ifdef DUART_SPEW printk("duart_close called by %i (%s)\n", current->pid, current->comm); #endif spin_lock_irqsave(&open_lock, flags); us->open--; #if 0 if (!us->open) { /* Flushing TX stuff here is conservative */ duart_mask_ints(line, M_DUART_IMR_IN | M_DUART_IMR_BRK | M_DUART_IMR_RX | M_DUART_IMR_TX); spin_lock(&us->outp_lock); us->outp_head = us->outp_tail = us->outp_count = us->outp_stopped = 0; us->tty = NULL; spin_unlock(&us->outp_lock); } #endif ref_count--; spin_unlock_irqrestore(&open_lock, flags); MOD_DEC_USE_COUNT; } /* Set up the driver and register it, register the 2 1250 UART interrupts. This is called from tty_init, or as a part of the module init */ static int __init sb1250_duart_init(void) { sb1250_duart_driver.magic = TTY_DRIVER_MAGIC; sb1250_duart_driver.driver_name = "serial"; #ifdef CONFIG_DEVFS_FS sb1250_duart_driver.name = "tts/%d"; #else sb1250_duart_driver.name = "ttyS"; #endif sb1250_duart_driver.major = TTY_MAJOR; sb1250_duart_driver.minor_start = 64; sb1250_duart_driver.num = 2; sb1250_duart_driver.type = TTY_DRIVER_TYPE_SERIAL; sb1250_duart_driver.subtype = SERIAL_TYPE_NORMAL; sb1250_duart_driver.init_termios = tty_std_termios; sb1250_duart_driver.flags = TTY_DRIVER_REAL_RAW; sb1250_duart_driver.refcount = &ref_count; sb1250_duart_driver.table = duart_table; sb1250_duart_driver.termios = duart_termios; sb1250_duart_driver.termios_locked = duart_termios_locked; sb1250_duart_driver.open = duart_open; sb1250_duart_driver.close = duart_close; sb1250_duart_driver.write = duart_write; sb1250_duart_driver.put_char = duart_put_char; sb1250_duart_driver.write_room = duart_write_room; sb1250_duart_driver.chars_in_buffer = duart_chars_in_buffer; sb1250_duart_driver.flush_buffer = duart_flush_buffer; sb1250_duart_driver.ioctl = duart_ioctl; sb1250_duart_driver.set_termios = duart_set_termios; sb1250_duart_driver.stop = duart_stop; sb1250_duart_driver.start = duart_start; sb1250_duart_driver.wait_until_sent = duart_wait_until_sent; sb1250_duart_callout_driver = sb1250_duart_driver; #ifdef CONFIG_DEVFS_FS sb1250_duart_callout_driver.name = "cua/%d"; #else sb1250_duart_callout_driver.name = "cua"; #endif sb1250_duart_callout_driver.major = TTYAUX_MAJOR; sb1250_duart_callout_driver.subtype = SERIAL_TYPE_CALLOUT; duart_mask_ints(0, 0xf); if (request_irq(K_INT_UART_0, duart_int, 0, "uart0", &uart_states[0])) { panic("Couldn't get uart0 interrupt line"); } #ifndef CONFIG_SIBYTE_SB1250_DUART_NO_PORT_1 duart_mask_ints(1, 0xf); if (request_irq(K_INT_UART_1, duart_int, 0, "uart1", &uart_states[1])) { panic("Couldn't get uart1 interrupt line"); } #endif /* Interrupts are now active, our ISR can be called. */ if (tty_register_driver(&sb1250_duart_driver)) { printk(KERN_ERR "Couldn't register sb1250 duart serial driver\n"); } if (tty_register_driver(&sb1250_duart_callout_driver)) { printk(KERN_ERR "Couldn't register sb1250 duart callout driver\n"); } duart_set_cflag(0, DEFAULT_CFLAGS); #ifndef CONFIG_SIBYTE_SB1250_DUART_NO_PORT_1 duart_set_cflag(1, DEFAULT_CFLAGS); #endif return 0; } /* Unload the driver. Unregister stuff, get ready to go away */ static void __exit sb1250_duart_fini(void) { unsigned long flags; int ret; save_flags(flags); cli(); ret = tty_unregister_driver(&sb1250_duart_callout_driver); if (ret) { printk(KERN_ERR "Unable to unregister sb1250 duart callout driver (%d)\n", ret); } ret = tty_unregister_driver(&sb1250_duart_driver); if (ret) { printk(KERN_ERR "Unable to unregister sb1250 duart serial driver (%d)\n", ret); } free_irq(K_INT_UART_0, &uart_states[0]); free_irq(K_INT_UART_1, &uart_states[1]); /* mask lines in the scd */ disable_irq(K_INT_UART_0); disable_irq(K_INT_UART_1); restore_flags(flags); } module_init(sb1250_duart_init); module_exit(sb1250_duart_fini); MODULE_DESCRIPTION("SB1250 Duart serial driver"); MODULE_AUTHOR("Justin Carlson "); #ifdef CONFIG_SERIAL_CONSOLE /* * Serial console stuff. * Very basic, polling driver for doing serial console output. * FIXME; there is a race here; we can't be sure that * the tx is still empty without holding outp_lock for this line. * Worst that can happen for now, though, is dropped characters. */ static void ser_console_write(struct console *cons, const char *str, unsigned int count) { unsigned int i; unsigned long flags; spin_lock_irqsave(&uart_states[0].outp_lock, flags); for (i = 0; i < count; i++) { if (str[i] == '\n') { /* Expand LF -> CRLF */ while (!(get_status_reg(0) & M_DUART_TX_RDY)) { /* Spin, doing nothing. */ } out64('\r', IO_SPACE_BASE | A_DUART_CHANREG(0, R_DUART_TX_HOLD)); } while (!(get_status_reg(0) & M_DUART_TX_RDY)) { /* Spin, doing nothing. */ } out64(str[i], IO_SPACE_BASE | A_DUART_CHANREG(0, R_DUART_TX_HOLD)); } spin_unlock_irqrestore(&uart_states[0].outp_lock, flags); } static kdev_t ser_console_device(struct console *c) { return MKDEV(TTY_MAJOR, 64 + c->index); } static int ser_console_wait_key(struct console *cons) { panic("ser_console_wait_key called"); } static int ser_console_setup(struct console *cons, char *str) { /* Initialize the transmitter */ duart_set_cflag(0, DEFAULT_CFLAGS); return 0; } static struct console sb1250_ser_cons = { name: "ttyS", write: ser_console_write, device: ser_console_device, wait_key: ser_console_wait_key, setup: ser_console_setup, flags: CON_PRINTBUFFER, index: -1, }; void __init sb1250_serial_console_init(void) { register_console(&sb1250_ser_cons); } #endif /* CONFIG_SERIAL_CONSOLE */