/* $Id$
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 - 1997, 2000-2002 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/types.h>
#include <linux/config.h>
#include <linux/slab.h>
#include <linux/ctype.h>
#include <asm/sn/sgi.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/io.h>
#include <asm/sn/sn_cpuid.h>
#include <asm/sn/iograph.h>
#include <asm/sn/invent.h>
#include <asm/sn/hcl.h>
#include <asm/sn/hcl_util.h>
#include <asm/sn/labelcl.h>
#include <asm/sn/xtalk/xbow.h>
#include <asm/sn/pci/bridge.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/eeprom.h>
#include <asm/sn/sn_private.h>
#include <asm/sn/pci/pcibr.h>
#include <asm/sn/xtalk/xtalk.h>
#include <asm/sn/xtalk/xswitch.h>
#include <asm/sn/xtalk/xwidget.h>
#include <asm/sn/xtalk/xtalk_private.h>
#include <asm/sn/xtalk/xtalkaddrs.h>
/* #define IOGRAPH_DEBUG */
#ifdef IOGRAPH_DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif /* IOGRAPH_DEBUG */
/* #define PROBE_TEST */
/* At most 2 hubs can be connected to an xswitch */
#define NUM_XSWITCH_VOLUNTEER 2
/*
* Track which hubs have volunteered to manage devices hanging off of
* a Crosstalk Switch (e.g. xbow). This structure is allocated,
* initialized, and hung off the xswitch vertex early on when the
* xswitch vertex is created.
*/
typedef struct xswitch_vol_s {
mutex_t xswitch_volunteer_mutex;
int xswitch_volunteer_count;
devfs_handle_t xswitch_volunteer[NUM_XSWITCH_VOLUNTEER];
} *xswitch_vol_t;
void
xswitch_vertex_init(devfs_handle_t xswitch)
{
xswitch_vol_t xvolinfo;
int rc;
xvolinfo = kmalloc(sizeof(struct xswitch_vol_s), GFP_KERNEL);
mutex_init(&xvolinfo->xswitch_volunteer_mutex);
xvolinfo->xswitch_volunteer_count = 0;
rc = hwgraph_info_add_LBL(xswitch,
INFO_LBL_XSWITCH_VOL,
(arbitrary_info_t)xvolinfo);
ASSERT(rc == GRAPH_SUCCESS); rc = rc;
}
/*
* When assignment of hubs to widgets is complete, we no longer need the
* xswitch volunteer structure hanging around. Destroy it.
*/
static void
xswitch_volunteer_delete(devfs_handle_t xswitch)
{
xswitch_vol_t xvolinfo;
int rc;
rc = hwgraph_info_remove_LBL(xswitch,
INFO_LBL_XSWITCH_VOL,
(arbitrary_info_t *)&xvolinfo);
#ifdef LATER
ASSERT(rc == GRAPH_SUCCESS); rc = rc;
#endif
kfree(xvolinfo);
}
/*
* A Crosstalk master volunteers to manage xwidgets on the specified xswitch.
*/
/* ARGSUSED */
static void
volunteer_for_widgets(devfs_handle_t xswitch, devfs_handle_t master)
{
xswitch_vol_t xvolinfo = NULL;
(void)hwgraph_info_get_LBL(xswitch,
INFO_LBL_XSWITCH_VOL,
(arbitrary_info_t *)&xvolinfo);
if (xvolinfo == NULL) {
#ifdef LATER
if (!is_headless_node_vertex(master)) {
#if defined(SUPPORT_PRINTING_V_FORMAT)
printk(KERN_WARNING "volunteer for widgets: vertex %v has no info label",
xswitch);
#else
printk(KERN_WARNING "volunteer for widgets: vertex 0x%x has no info label",
xswitch);
#endif
}
#endif /* LATER */
return;
}
mutex_lock(&xvolinfo->xswitch_volunteer_mutex);
ASSERT(xvolinfo->xswitch_volunteer_count < NUM_XSWITCH_VOLUNTEER);
xvolinfo->xswitch_volunteer[xvolinfo->xswitch_volunteer_count] = master;
xvolinfo->xswitch_volunteer_count++;
mutex_unlock(&xvolinfo->xswitch_volunteer_mutex);
}
extern int xbow_port_io_enabled(nasid_t nasid, int widgetnum);
/*
* Assign all the xwidgets hanging off the specified xswitch to the
* Crosstalk masters that have volunteered for xswitch duty.
*/
/* ARGSUSED */
static void
assign_widgets_to_volunteers(devfs_handle_t xswitch, devfs_handle_t hubv)
{
int curr_volunteer, num_volunteer;
xwidgetnum_t widgetnum;
xswitch_info_t xswitch_info;
xswitch_vol_t xvolinfo = NULL;
nasid_t nasid;
hubinfo_t hubinfo;
hubinfo_get(hubv, &hubinfo);
nasid = hubinfo->h_nasid;
xswitch_info = xswitch_info_get(xswitch);
ASSERT(xswitch_info != NULL);
(void)hwgraph_info_get_LBL(xswitch,
INFO_LBL_XSWITCH_VOL,
(arbitrary_info_t *)&xvolinfo);
if (xvolinfo == NULL) {
#ifdef LATER
if (!is_headless_node_vertex(hubv)) {
#if defined(SUPPORT_PRINTING_V_FORMAT)
printk(KERN_WARNING "assign_widgets_to_volunteers:vertex %v has "
" no info label",
xswitch);
#else
printk(KERN_WARNING "assign_widgets_to_volunteers:vertex 0x%x has "
" no info label",
xswitch);
#endif
}
#endif /* LATER */
return;
}
num_volunteer = xvolinfo->xswitch_volunteer_count;
ASSERT(num_volunteer > 0);
curr_volunteer = 0;
/* Assign master hub for xswitch itself. */
if (HUB_WIDGET_ID_MIN > 0) {
hubv = xvolinfo->xswitch_volunteer[0];
xswitch_info_master_assignment_set(xswitch_info, (xwidgetnum_t)0, hubv);
}
/*
* TBD: Use administrative information to alter assignment of
* widgets to hubs.
*/
for (widgetnum=HUB_WIDGET_ID_MIN; widgetnum <= HUB_WIDGET_ID_MAX; widgetnum++) {
/*
* Ignore disabled/empty ports.
*/
if (!xbow_port_io_enabled(nasid, widgetnum))
continue;
/*
* If this is the master IO board, assign it to the same
* hub that owned it in the prom.
*/
if (is_master_nasid_widget(nasid, widgetnum)) {
int i;
for (i=0; i<num_volunteer; i++) {
hubv = xvolinfo->xswitch_volunteer[i];
hubinfo_get(hubv, &hubinfo);
nasid = hubinfo->h_nasid;
if (nasid == get_console_nasid())
goto do_assignment;
}
#ifdef LATER
PRINT_PANIC("Nasid == %d, console nasid == %d",
nasid, get_console_nasid());
#endif
}
/*
* Do a round-robin assignment among the volunteer nodes.
*/
hubv = xvolinfo->xswitch_volunteer[curr_volunteer];
curr_volunteer = (curr_volunteer + 1) % num_volunteer;
/* fall through */
do_assignment:
/*
* At this point, we want to make hubv the master of widgetnum.
*/
xswitch_info_master_assignment_set(xswitch_info, widgetnum, hubv);
}
xswitch_volunteer_delete(xswitch);
}
/*
* Early iograph initialization. Called by master CPU in mlreset().
* Useful for including iograph.o in kernel.o.
*/
void
iograph_early_init(void)
{
/*
* Need new way to get this information ..
*/
cnodeid_t cnode;
nasid_t nasid;
lboard_t *board;
/*
* Init. the board-to-hwgraph link early, so FRU analyzer
* doesn't trip on leftover values if we panic early on.
*/
for(cnode = 0; cnode < numnodes; cnode++) {
nasid = COMPACT_TO_NASID_NODEID(cnode);
board = (lboard_t *)KL_CONFIG_INFO(nasid);
DBG("iograph_early_init: Found board 0x%p\n", board);
/* Check out all the board info stored on a node */
while(board) {
board->brd_graph_link = GRAPH_VERTEX_NONE;
board = KLCF_NEXT(board);
DBG("iograph_early_init: Found board 0x%p\n", board);
}
}
hubio_init();
}
#ifdef LINUX_KERNEL_THREADS
static struct semaphore io_init_sema;
#endif
/*
* Let boot processor know that we're done initializing our node's IO
* and then exit.
*/
/* ARGSUSED */
static void
io_init_done(cnodeid_t cnodeid,cpu_cookie_t c)
{
/* Let boot processor know that we're done. */
#ifdef LINUX_KERNEL_THREADS
up(&io_init_sema);
#endif
#ifdef LATER
/* This is for the setnoderun done when the io_init thread
* started
*/
restorenoderun(c);
sthread_exit();
#endif
}
/*
* Probe to see if this hub's xtalk link is active. If so,
* return the Crosstalk Identification of the widget that we talk to.
* This is called before any of the Crosstalk infrastructure for
* this hub is set up. It's usually called on the node that we're
* probing, but not always.
*
* TBD: Prom code should actually do this work, and pass through
* hwid for our use.
*/
static void
early_probe_for_widget(devfs_handle_t hubv, xwidget_hwid_t hwid)
{
hubreg_t llp_csr_reg;
nasid_t nasid;
hubinfo_t hubinfo;
hubinfo_get(hubv, &hubinfo);
nasid = hubinfo->h_nasid;
llp_csr_reg = REMOTE_HUB_L(nasid, IIO_LLP_CSR);
/*
* If link is up, read the widget's part number.
* A direct connect widget must respond to widgetnum=0.
*/
if (llp_csr_reg & IIO_LLP_CSR_IS_UP) {
/* TBD: Put hub into "indirect" mode */
/*
* We're able to read from a widget because our hub's
* WIDGET_ID was set up earlier.
*/
widgetreg_t widget_id = *(volatile widgetreg_t *)
(RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID);
DBG("early_probe_for_widget: Hub Vertex 0x%p is UP widget_id = 0x%x Register 0x%p\n", hubv, widget_id,
(volatile widgetreg_t *)(RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID) );
hwid->part_num = XWIDGET_PART_NUM(widget_id);
hwid->rev_num = XWIDGET_REV_NUM(widget_id);
hwid->mfg_num = XWIDGET_MFG_NUM(widget_id);
/* TBD: link reset */
} else {
hwid->part_num = XWIDGET_PART_NUM_NONE;
hwid->rev_num = XWIDGET_REV_NUM_NONE;
hwid->mfg_num = XWIDGET_MFG_NUM_NONE;
}
}
/* Add inventory information to the widget vertex
* Right now (module,slot,revision) is being
* added as inventory information.
*/
static void
xwidget_inventory_add(devfs_handle_t widgetv,
lboard_t *board,
struct xwidget_hwid_s hwid)
{
if (!board)
return;
/* Donot add inventory information for the baseio
* on a speedo with an xbox. It has already been
* taken care of in SN00_vmc.
* Speedo with xbox's baseio comes in at slot io1 (widget 9)
*/
device_inventory_add(widgetv,INV_IOBD,board->brd_type,
board->brd_module,
SLOTNUM_GETSLOT(board->brd_slot),
hwid.rev_num);
}
/*
* io_xswitch_widget_init
*
*/
/* defined in include/linux/ctype.h */
/* #define toupper(c) (islower(c) ? (c) - 'a' + 'A' : (c)) */
void
io_xswitch_widget_init(devfs_handle_t xswitchv,
devfs_handle_t hubv,
xwidgetnum_t widgetnum,
async_attach_t aa)
{
xswitch_info_t xswitch_info;
xwidgetnum_t hub_widgetid;
devfs_handle_t widgetv;
cnodeid_t cnode;
widgetreg_t widget_id;
nasid_t nasid, peer_nasid;
struct xwidget_hwid_s hwid;
hubinfo_t hubinfo;
/*REFERENCED*/
int rc;
char slotname[SLOTNUM_MAXLENGTH];
char pathname[128];
char new_name[64];
moduleid_t module;
slotid_t slot;
lboard_t *board = NULL;
char buffer[16];
slotid_t get_widget_slotnum(int xbow, int widget);
DBG("\nio_xswitch_widget_init: hubv 0x%p, xswitchv 0x%p, widgetnum 0x%x\n", hubv, xswitchv, widgetnum);
/*
* Verify that xswitchv is indeed an attached xswitch.
*/
xswitch_info = xswitch_info_get(xswitchv);
ASSERT(xswitch_info != NULL);
hubinfo_get(hubv, &hubinfo);
nasid = hubinfo->h_nasid;
cnode = NASID_TO_COMPACT_NODEID(nasid);
hub_widgetid = hubinfo->h_widgetid;
/* Who's the other guy on out crossbow (if anyone) */
peer_nasid = NODEPDA(cnode)->xbow_peer;
if (peer_nasid == INVALID_NASID)
/* If I don't have a peer, use myself. */
peer_nasid = nasid;
/* Check my xbow structure and my peer's */
if (!xbow_port_io_enabled(nasid, widgetnum) &&
!xbow_port_io_enabled(peer_nasid, widgetnum)) {
return;
}
if (xswitch_info_link_ok(xswitch_info, widgetnum)) {
char name[4];
/*
* If the current hub is not supposed to be the master
* for this widgetnum, then skip this widget.
*/
if (xswitch_info_master_assignment_get(xswitch_info,
widgetnum) != hubv) {
return;
}
module = NODEPDA(cnode)->module_id;
#ifdef XBRIDGE_REGS_SIM
/* hardwire for now...could do this with something like:
* xbow_soft_t soft = hwgraph_fastinfo_get(vhdl);
* xbow_t xbow = soft->base;
* xbowreg_t xwidget_id = xbow->xb_wid_id;
* but I don't feel like figuring out vhdl right now..
* and I know for a fact the answer is 0x2d000049
*/
DBG("io_xswitch_widget_init: XBRIDGE_REGS_SIM FIXME: reading xwidget id: hardwired to xbridge (0x2d000049).\n");
DBG("XWIDGET_PART_NUM(0x2d000049)= 0x%x\n", XWIDGET_PART_NUM(0x2d000049));
if (XWIDGET_PART_NUM(0x2d000049)==XXBOW_WIDGET_PART_NUM) {
#else
if (nasid_has_xbridge(nasid)) {
#endif /* XBRIDGE_REGS_SIM */
board = find_lboard_module_class(
(lboard_t *)KL_CONFIG_INFO(nasid),
module,
KLTYPE_IOBRICK);
DBG("io_xswitch_widget_init: Board 0x%p\n", board);
{
lboard_t dummy;
if (board) {
DBG("io_xswitch_widget_init: Found KLTYPE_IOBRICK Board 0x%p brd_type 0x%x\n", board, board->brd_type);
} else {
DBG("io_xswitch_widget_init: FIXME did not find IOBOARD\n");
board = &dummy;
}
}
/*
* Make sure we really want to say xbrick, pbrick,
* etc. rather than XIO, graphics, etc.
*/
#ifdef SUPPORT_PRINTING_M_FORMAT
sprintf(pathname, EDGE_LBL_MODULE "/%M/"
"%cbrick" "/%s/%d",
NODEPDA(cnode)->module_id,
#else
memset(buffer, 0, 16);
format_module_id(buffer, NODEPDA(cnode)->module_id, MODULE_FORMAT_BRIEF);
sprintf(pathname, EDGE_LBL_MODULE "/%s/"
"%cbrick" "/%s/%d",
buffer,
#endif
(board->brd_type == KLTYPE_IBRICK) ? 'I' :
(board->brd_type == KLTYPE_PBRICK) ? 'P' :
(board->brd_type == KLTYPE_XBRICK) ? 'X' : '?',
EDGE_LBL_XTALK, widgetnum);
}
DBG("io_xswitch_widget_init: path= %s\n", pathname);
rc = hwgraph_path_add(hwgraph_root, pathname, &widgetv);
ASSERT(rc == GRAPH_SUCCESS);
/* This is needed to let the user programs to map the
* module,slot numbers to the corresponding widget numbers
* on the crossbow.
*/
rc = device_master_set(hwgraph_connectpt_get(widgetv), hubv);
/* If we are looking at the global master io6
* then add information about the version of
* the io6prom as a part of "detailed inventory"
* information.
*/
if (is_master_baseio(nasid,
NODEPDA(cnode)->module_id,
get_widget_slotnum(0,widgetnum))) {
extern void klhwg_baseio_inventory_add(devfs_handle_t,
cnodeid_t);
module = NODEPDA(cnode)->module_id;
#ifdef XBRIDGE_REGS_SIM
DBG("io_xswitch_widget_init: XBRIDGE_REGS_SIM FIXME: reading xwidget id: hardwired to xbridge (0x2d000049).\n");
if (XWIDGET_PART_NUM(0x2d000049)==XXBOW_WIDGET_PART_NUM) {
#else
if (nasid_has_xbridge(nasid)) {
#endif /* XBRIDGE_REGS_SIM */
board = find_lboard_module(
(lboard_t *)KL_CONFIG_INFO(nasid),
module);
/*
* Change iobrick to correct i/o brick
*/
#ifdef SUPPORT_PRINTING_M_FORMAT
sprintf(pathname, EDGE_LBL_MODULE "/%M/"
#else
sprintf(pathname, EDGE_LBL_MODULE "/%x/"
#endif
"iobrick" "/%s/%d",
NODEPDA(cnode)->module_id,
EDGE_LBL_XTALK, widgetnum);
} else {
slot = get_widget_slotnum(0, widgetnum);
board = get_board_name(nasid, module, slot,
new_name);
/*
* Create the vertex for the widget,
* using the decimal
* widgetnum as the name of the primary edge.
*/
#ifdef SUPPORT_PRINTING_M_FORMAT
sprintf(pathname, EDGE_LBL_MODULE "/%M/"
EDGE_LBL_SLOT "/%s/%s",
NODEPDA(cnode)->module_id,
slotname, new_name);
#else
memset(buffer, 0, 16);
format_module_id(buffer, NODEPDA(cnode)->module_id, MODULE_FORMAT_BRIEF);
sprintf(pathname, EDGE_LBL_MODULE "/%s/"
EDGE_LBL_SLOT "/%s/%s",
buffer,
slotname, new_name);
#endif
}
rc = hwgraph_path_add(hwgraph_root, pathname, &widgetv);
DBG("io_xswitch_widget_init: (2) path= %s\n", pathname);
/*
* This is a weird ass code needed for error injection
* purposes.
*/
rc = device_master_set(hwgraph_connectpt_get(widgetv), hubv);
klhwg_baseio_inventory_add(widgetv,cnode);
}
sprintf(name, "%d", widgetnum);
DBG("io_xswitch_widget_init: FIXME hwgraph_edge_add %s xswitchv 0x%p, widgetv 0x%p\n", name, xswitchv, widgetv);
rc = hwgraph_edge_add(xswitchv, widgetv, name);
/*
* crosstalk switch code tracks which
* widget is attached to each link.
*/
xswitch_info_vhdl_set(xswitch_info, widgetnum, widgetv);
/*
* Peek at the widget to get its crosstalk part and
* mfgr numbers, then present it to the generic xtalk
* bus provider to have its driver attach routine
* called (or not).
*/
#ifdef XBRIDGE_REGS_SIM
widget_id = 0x2d000049;
DBG("io_xswitch_widget_init: XBRIDGE_REGS_SIM FIXME: id hardwired to widget_id\n");
#else
widget_id = XWIDGET_ID_READ(nasid, widgetnum);
#endif /* XBRIDGE_REGS_SIM */
hwid.part_num = XWIDGET_PART_NUM(widget_id);
hwid.rev_num = XWIDGET_REV_NUM(widget_id);
hwid.mfg_num = XWIDGET_MFG_NUM(widget_id);
/* Store some inventory information about
* the xwidget in the hardware graph.
*/
xwidget_inventory_add(widgetv,board,hwid);
(void)xwidget_register(&hwid, widgetv, widgetnum,
hubv, hub_widgetid,
aa);
#ifdef SN0_USE_BTE
bte_bpush_war(cnode, (void *)board);
#endif
}
}
static void
io_init_xswitch_widgets(devfs_handle_t xswitchv, cnodeid_t cnode)
{
xwidgetnum_t widgetnum;
async_attach_t aa;
aa = async_attach_new();
DBG("io_init_xswitch_widgets: xswitchv 0x%p for cnode %d\n", xswitchv, cnode);
for (widgetnum = HUB_WIDGET_ID_MIN; widgetnum <= HUB_WIDGET_ID_MAX;
widgetnum++) {
io_xswitch_widget_init(xswitchv,
cnodeid_to_vertex(cnode),
widgetnum, aa);
}
/*
* Wait for parallel attach threads, if any, to complete.
*/
async_attach_waitall(aa);
async_attach_free(aa);
}
/*
* For each PCI bridge connected to the xswitch, add a link from the
* board's klconfig info to the bridge's hwgraph vertex. This lets
* the FRU analyzer find the bridge without traversing the hardware
* graph and risking hangs.
*/
static void
io_link_xswitch_widgets(devfs_handle_t xswitchv, cnodeid_t cnodeid)
{
xwidgetnum_t widgetnum;
char pathname[128];
devfs_handle_t vhdl;
nasid_t nasid, peer_nasid;
lboard_t *board;
/* And its connected hub's nasids */
nasid = COMPACT_TO_NASID_NODEID(cnodeid);
peer_nasid = NODEPDA(cnodeid)->xbow_peer;
/*
* Look for paths matching "<widgetnum>/pci" under xswitchv.
* For every widget, init. its lboard's hwgraph link. If the
* board has a PCI bridge, point the link to it.
*/
for (widgetnum = HUB_WIDGET_ID_MIN; widgetnum <= HUB_WIDGET_ID_MAX;
widgetnum++) {
sprintf(pathname, "%d", widgetnum);
if (hwgraph_traverse(xswitchv, pathname, &vhdl) !=
GRAPH_SUCCESS)
continue;
board = find_lboard_module((lboard_t *)KL_CONFIG_INFO(nasid),
NODEPDA(cnodeid)->module_id);
if (board == NULL && peer_nasid != INVALID_NASID) {
/*
* Try to find the board on our peer
*/
board = find_lboard_module(
(lboard_t *)KL_CONFIG_INFO(peer_nasid),
NODEPDA(cnodeid)->module_id);
}
if (board == NULL) {
#if defined(SUPPORT_PRINTING_V_FORMAT)
printk(KERN_WARNING "Could not find PROM info for vertex %v, "
"FRU analyzer may fail",
vhdl);
#else
printk(KERN_WARNING "Could not find PROM info for vertex 0x%p, "
"FRU analyzer may fail",
(void *)vhdl);
#endif
return;
}
sprintf(pathname, "%d/"EDGE_LBL_PCI, widgetnum);
if (hwgraph_traverse(xswitchv, pathname, &vhdl) ==
GRAPH_SUCCESS)
board->brd_graph_link = vhdl;
else
board->brd_graph_link = GRAPH_VERTEX_NONE;
}
}
/*
* Initialize all I/O on the specified node.
*/
static void
io_init_node(cnodeid_t cnodeid)
{
/*REFERENCED*/
devfs_handle_t hubv, switchv, widgetv;
struct xwidget_hwid_s hwid;
hubinfo_t hubinfo;
int is_xswitch;
nodepda_t *npdap;
struct semaphore *peer_sema = 0;
uint32_t widget_partnum;
nodepda_router_info_t *npda_rip;
cpu_cookie_t c = 0;
extern int hubdev_docallouts(devfs_handle_t);
#ifdef LATER
/* Try to execute on the node that we're initializing. */
c = setnoderun(cnodeid);
#endif
npdap = NODEPDA(cnodeid);
/*
* Get the "top" vertex for this node's hardware
* graph; it will carry the per-hub hub-specific
* data, and act as the crosstalk provider master.
* It's canonical path is probably something of the
* form /hw/module/%M/slot/%d/node
*/
hubv = cnodeid_to_vertex(cnodeid);
DBG("io_init_node: Initialize IO for cnode %d hubv(node) 0x%p npdap 0x%p\n", cnodeid, hubv, npdap);
ASSERT(hubv != GRAPH_VERTEX_NONE);
hubdev_docallouts(hubv);
/*
* Set up the dependent routers if we have any.
*/
npda_rip = npdap->npda_rip_first;
while(npda_rip) {
/* If the router info has not been initialized
* then we need to do the router initialization
*/
if (!npda_rip->router_infop) {
router_init(cnodeid,0,npda_rip);
}
npda_rip = npda_rip->router_next;
}
/*
* Read mfg info on this hub
*/
#ifdef LATER
printk("io_init_node: FIXME need to implement HUB_VERTEX_MFG_INFO\n");
HUB_VERTEX_MFG_INFO(hubv);
#endif /* LATER */
/*
* If nothing connected to this hub's xtalk port, we're done.
*/
early_probe_for_widget(hubv, &hwid);
if (hwid.part_num == XWIDGET_PART_NUM_NONE) {
#ifdef PROBE_TEST
if ((cnodeid == 1) || (cnodeid == 2)) {
int index;
for (index = 0; index < 600; index++)
DBG("Interfering with device probing!!!\n");
}
#endif
/* io_init_done takes cpu cookie as 2nd argument
* to do a restorenoderun for the setnoderun done
* at the start of this thread
*/
DBG("**** io_init_node: Node's 0x%p hub widget has XWIDGET_PART_NUM_NONE ****\n", hubv);
return;
/* NOTREACHED */
}
/*
* attach our hub_provider information to hubv,
* so we can use it as a crosstalk provider "master"
* vertex.
*/
xtalk_provider_register(hubv, &hub_provider);
xtalk_provider_startup(hubv);
/*
* Create a vertex to represent the crosstalk bus
* attached to this hub, and a vertex to be used
* as the connect point for whatever is out there
* on the other side of our crosstalk connection.
*
* Crosstalk Switch drivers "climb up" from their
* connection point to try and take over the switch
* point.
*
* Of course, the edges and verticies may already
* exist, in which case our net effect is just to
* associate the "xtalk_" driver with the connection
* point for the device.
*/
(void)hwgraph_path_add(hubv, EDGE_LBL_XTALK, &switchv);
DBG("io_init_node: Created 'xtalk' entry to '../node/' xtalk vertex 0x%p\n", switchv);
ASSERT(switchv != GRAPH_VERTEX_NONE);
(void)hwgraph_edge_add(hubv, switchv, EDGE_LBL_IO);
DBG("io_init_node: Created symlink 'io' from ../node/io to ../node/xtalk \n");
/*
* We need to find the widget id and update the basew_id field
* accordingly. In particular, SN00 has direct connected bridge,
* and hence widget id is Not 0.
*/
widget_partnum = (((*(volatile int32_t *)(NODE_SWIN_BASE(COMPACT_TO_NASID_NODEID(cnodeid), 0) + WIDGET_ID))) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT;
if (widget_partnum == BRIDGE_WIDGET_PART_NUM ||
widget_partnum == XBRIDGE_WIDGET_PART_NUM){
npdap->basew_id = (((*(volatile int32_t *)(NODE_SWIN_BASE(COMPACT_TO_NASID_NODEID(cnodeid), 0) + BRIDGE_WID_CONTROL))) & WIDGET_WIDGET_ID);
DBG("io_init_node: Found XBRIDGE widget_partnum= 0x%x\n", widget_partnum);
} else if (widget_partnum == XBOW_WIDGET_PART_NUM ||
widget_partnum == XXBOW_WIDGET_PART_NUM) {
/*
* Xbow control register does not have the widget ID field.
* So, hard code the widget ID to be zero.
*/
DBG("io_init_node: Found XBOW widget_partnum= 0x%x\n", widget_partnum);
npdap->basew_id = 0;
} else if (widget_partnum == XG_WIDGET_PART_NUM) {
/*
* OK, WTF do we do here if we have an XG direct connected to a HUB/Bedrock???
* So, hard code the widget ID to be zero?
*/
npdap->basew_id = 0;
npdap->basew_id = (((*(volatile int32_t *)(NODE_SWIN_BASE(COMPACT_TO_NASID_NODEID(cnodeid), 0) + BRIDGE_WID_CONTROL))) & WIDGET_WIDGET_ID);
} else {
npdap->basew_id = (((*(volatile int32_t *)(NODE_SWIN_BASE(COMPACT_TO_NASID_NODEID(cnodeid), 0) + BRIDGE_WID_CONTROL))) & WIDGET_WIDGET_ID);
panic(" ****io_init_node: Unknown Widget Part Number 0x%x Widgt ID 0x%x attached to Hubv 0x%p ****\n", widget_partnum, npdap->basew_id, (void *)hubv);
/*NOTREACHED*/
}
{
char widname[10];
sprintf(widname, "%x", npdap->basew_id);
(void)hwgraph_path_add(switchv, widname, &widgetv);
DBG("io_init_node: Created '%s' to '..node/xtalk/' vertex 0x%p\n", widname, widgetv);
ASSERT(widgetv != GRAPH_VERTEX_NONE);
}
nodepda->basew_xc = widgetv;
is_xswitch = xwidget_hwid_is_xswitch(&hwid);
/*
* Try to become the master of the widget. If this is an xswitch
* with multiple hubs connected, only one will succeed. Mastership
* of an xswitch is used only when touching registers on that xswitch.
* The slave xwidgets connected to the xswitch can be owned by various
* masters.
*/
if (device_master_set(widgetv, hubv) == 0) {
/* Only one hub (thread) per Crosstalk device or switch makes
* it to here.
*/
/*
* Initialize whatever xwidget is hanging off our hub.
* Whatever it is, it's accessible through widgetnum 0.
*/
hubinfo_get(hubv, &hubinfo);
(void)xwidget_register(&hwid, widgetv, npdap->basew_id, hubv, hubinfo->h_widgetid, NULL);
if (!is_xswitch) {
/* io_init_done takes cpu cookie as 2nd argument
* to do a restorenoderun for the setnoderun done
* at the start of this thread
*/
io_init_done(cnodeid,c);
/* NOTREACHED */
}
/*
* Special handling for Crosstalk Switches (e.g. xbow).
* We need to do things in roughly the following order:
* 1) Initialize xswitch hardware (done above)
* 2) Determine which hubs are available to be widget masters
* 3) Discover which links are active from the xswitch
* 4) Assign xwidgets hanging off the xswitch to hubs
* 5) Initialize all xwidgets on the xswitch
*/
volunteer_for_widgets(switchv, hubv);
/* If there's someone else on this crossbow, recognize him */
if (npdap->xbow_peer != INVALID_NASID) {
nodepda_t *peer_npdap = NODEPDA(NASID_TO_COMPACT_NODEID(npdap->xbow_peer));
peer_sema = &peer_npdap->xbow_sema;
volunteer_for_widgets(switchv, peer_npdap->node_vertex);
}
assign_widgets_to_volunteers(switchv, hubv);
/* Signal that we're done */
if (peer_sema) {
mutex_unlock(peer_sema);
}
}
else {
/* Wait 'til master is done assigning widgets. */
mutex_lock(&npdap->xbow_sema);
}
#ifdef PROBE_TEST
if ((cnodeid == 1) || (cnodeid == 2)) {
int index;
for (index = 0; index < 500; index++)
DBG("Interfering with device probing!!!\n");
}
#endif
/* Now both nodes can safely inititialize widgets */
io_init_xswitch_widgets(switchv, cnodeid);
io_link_xswitch_widgets(switchv, cnodeid);
/* io_init_done takes cpu cookie as 2nd argument
* to do a restorenoderun for the setnoderun done
* at the start of this thread
*/
io_init_done(cnodeid,c);
DBG("\nio_init_node: DONE INITIALIZED ALL I/O FOR CNODEID %d\n\n", cnodeid);
}
#define IOINIT_STKSZ (16 * 1024)
#define __DEVSTR1 "/../.master/"
#define __DEVSTR2 "/target/"
#define __DEVSTR3 "/lun/0/disk/partition/"
#define __DEVSTR4 "/../ef"
#if defined(CONFIG_IA64_SGI_SN1)
/*
* Currently, we need to allow for 5 IBrick slots with 1 FC each
* plus an internal 1394.
*
* ioconfig starts numbering SCSI's at NUM_BASE_IO_SCSI_CTLR.
*/
#define NUM_BASE_IO_SCSI_CTLR 6
#else
#define NUM_BASE_IO_SCSI_CTLR 6
#endif
/*
* This tells ioconfig where it can start numbering scsi controllers.
* Below this base number, platform-specific handles the numbering.
* XXX Irix legacy..controller numbering should be part of devfsd's job
*/
int num_base_io_scsi_ctlr = 2; /* used by syssgi */
devfs_handle_t base_io_scsi_ctlr_vhdl[NUM_BASE_IO_SCSI_CTLR];
static devfs_handle_t baseio_enet_vhdl,baseio_console_vhdl;
/*
* Put the logical controller number information in the
* scsi controller vertices for each scsi controller that
* is in a "fixed position".
*/
static void
scsi_ctlr_nums_add(devfs_handle_t pci_vhdl)
{
{
int i;
num_base_io_scsi_ctlr = NUM_BASE_IO_SCSI_CTLR;
/* Initialize base_io_scsi_ctlr_vhdl array */
for (i=0; i<NUM_BASE_IO_SCSI_CTLR; i++)
base_io_scsi_ctlr_vhdl[i] = GRAPH_VERTEX_NONE;
}
{
/*
* May want to consider changing the SN0 code, above, to work more like
* the way this works.
*/
devfs_handle_t base_ibrick_xbridge_vhdl;
devfs_handle_t base_ibrick_xtalk_widget_vhdl;
devfs_handle_t scsi_ctlr_vhdl;
int i;
graph_error_t rv;
/*
* This is a table of "well-known" SCSI controllers and their well-known
* controller numbers. The names in the table start from the base IBrick's
* Xbridge vertex, so the first component is the xtalk widget number.
*/
static struct {
char *base_ibrick_scsi_path;
int controller_number;
} hardwired_scsi_controllers[] = {
{"15/" EDGE_LBL_PCI "/1/" EDGE_LBL_SCSI_CTLR "/0", 0},
{"15/" EDGE_LBL_PCI "/2/" EDGE_LBL_SCSI_CTLR "/0", 1},
{"15/" EDGE_LBL_PCI "/3/" EDGE_LBL_SCSI_CTLR "/0", 2},
{"14/" EDGE_LBL_PCI "/1/" EDGE_LBL_SCSI_CTLR "/0", 3},
{"14/" EDGE_LBL_PCI "/2/" EDGE_LBL_SCSI_CTLR "/0", 4},
{"15/" EDGE_LBL_PCI "/6/ohci/0/" EDGE_LBL_SCSI_CTLR "/0", 5},
{NULL, -1} /* must be last */
};
base_ibrick_xtalk_widget_vhdl = hwgraph_connectpt_get(pci_vhdl);
ASSERT_ALWAYS(base_ibrick_xtalk_widget_vhdl != GRAPH_VERTEX_NONE);
base_ibrick_xbridge_vhdl = hwgraph_connectpt_get(base_ibrick_xtalk_widget_vhdl);
ASSERT_ALWAYS(base_ibrick_xbridge_vhdl != GRAPH_VERTEX_NONE);
hwgraph_vertex_unref(base_ibrick_xtalk_widget_vhdl);
/*
* Iterate through the list of well-known SCSI controllers.
* For each controller found, set it's controller number according
* to the table.
*/
for (i=0; hardwired_scsi_controllers[i].base_ibrick_scsi_path != NULL; i++) {
rv = hwgraph_path_lookup(base_ibrick_xbridge_vhdl,
hardwired_scsi_controllers[i].base_ibrick_scsi_path, &scsi_ctlr_vhdl, NULL);
if (rv != GRAPH_SUCCESS) /* No SCSI at this path */
continue;
ASSERT(hardwired_scsi_controllers[i].controller_number < NUM_BASE_IO_SCSI_CTLR);
base_io_scsi_ctlr_vhdl[hardwired_scsi_controllers[i].controller_number] = scsi_ctlr_vhdl;
device_controller_num_set(scsi_ctlr_vhdl, hardwired_scsi_controllers[i].controller_number);
hwgraph_vertex_unref(scsi_ctlr_vhdl); /* (even though we're actually keeping a reference) */
}
hwgraph_vertex_unref(base_ibrick_xbridge_vhdl);
}
}
#include <asm/sn/ioerror_handling.h>
devfs_handle_t sys_critical_graph_root = GRAPH_VERTEX_NONE;
/* Define the system critical vertices and connect them through
* a canonical parent-child relationships for easy traversal
* during io error handling.
*/
static void
sys_critical_graph_init(void)
{
devfs_handle_t bridge_vhdl,master_node_vhdl;
devfs_handle_t xbow_vhdl = GRAPH_VERTEX_NONE;
extern devfs_handle_t hwgraph_root;
devfs_handle_t pci_slot_conn;
int slot;
devfs_handle_t baseio_console_conn;
DBG("sys_critical_graph_init: FIXME.\n");
baseio_console_conn = hwgraph_connectpt_get(baseio_console_vhdl);
if (baseio_console_conn == NULL) {
return;
}
/* Get the vertex handle for the baseio bridge */
bridge_vhdl = device_master_get(baseio_console_conn);
/* Get the master node of the baseio card */
master_node_vhdl = cnodeid_to_vertex(
master_node_get(baseio_console_vhdl));
/* Add the "root->node" part of the system critical graph */
sys_critical_graph_vertex_add(hwgraph_root,master_node_vhdl);
/* Check if we have a crossbow */
if (hwgraph_traverse(master_node_vhdl,
EDGE_LBL_XTALK"/0",
&xbow_vhdl) == GRAPH_SUCCESS) {
/* We have a crossbow.Add "node->xbow" part of the system
* critical graph.
*/
sys_critical_graph_vertex_add(master_node_vhdl,xbow_vhdl);
/* Add "xbow->baseio bridge" of the system critical graph */
sys_critical_graph_vertex_add(xbow_vhdl,bridge_vhdl);
hwgraph_vertex_unref(xbow_vhdl);
} else
/* We donot have a crossbow. Add "node->baseio_bridge"
* part of the system critical graph.
*/
sys_critical_graph_vertex_add(master_node_vhdl,bridge_vhdl);
/* Add all the populated PCI slot vertices to the system critical
* graph with the bridge vertex as the parent.
*/
for (slot = 0 ; slot < 8; slot++) {
char slot_edge[10];
sprintf(slot_edge,"%d",slot);
if (hwgraph_traverse(bridge_vhdl,slot_edge, &pci_slot_conn)
!= GRAPH_SUCCESS)
continue;
sys_critical_graph_vertex_add(bridge_vhdl,pci_slot_conn);
hwgraph_vertex_unref(pci_slot_conn);
}
hwgraph_vertex_unref(bridge_vhdl);
/* Add the "ioc3 pci connection point -> console ioc3" part
* of the system critical graph
*/
if (hwgraph_traverse(baseio_console_vhdl,"..",&pci_slot_conn) ==
GRAPH_SUCCESS) {
sys_critical_graph_vertex_add(pci_slot_conn,
baseio_console_vhdl);
hwgraph_vertex_unref(pci_slot_conn);
}
/* Add the "ethernet pci connection point -> base ethernet" part of
* the system critical graph
*/
if (hwgraph_traverse(baseio_enet_vhdl,"..",&pci_slot_conn) ==
GRAPH_SUCCESS) {
sys_critical_graph_vertex_add(pci_slot_conn,
baseio_enet_vhdl);
hwgraph_vertex_unref(pci_slot_conn);
}
/* Add the "scsi controller pci connection point -> base scsi
* controller" part of the system critical graph
*/
if (hwgraph_traverse(base_io_scsi_ctlr_vhdl[0],
"../..",&pci_slot_conn) == GRAPH_SUCCESS) {
sys_critical_graph_vertex_add(pci_slot_conn,
base_io_scsi_ctlr_vhdl[0]);
hwgraph_vertex_unref(pci_slot_conn);
}
if (hwgraph_traverse(base_io_scsi_ctlr_vhdl[1],
"../..",&pci_slot_conn) == GRAPH_SUCCESS) {
sys_critical_graph_vertex_add(pci_slot_conn,
base_io_scsi_ctlr_vhdl[1]);
hwgraph_vertex_unref(pci_slot_conn);
}
hwgraph_vertex_unref(baseio_console_conn);
}
static void
baseio_ctlr_num_set(void)
{
char name[MAXDEVNAME];
devfs_handle_t console_vhdl, pci_vhdl, enet_vhdl;
devfs_handle_t ioc3_console_vhdl_get(void);
DBG("baseio_ctlr_num_set; FIXME\n");
console_vhdl = ioc3_console_vhdl_get();
if (console_vhdl == GRAPH_VERTEX_NONE)
return;
/* Useful for setting up the system critical graph */
baseio_console_vhdl = console_vhdl;
vertex_to_name(console_vhdl,name,MAXDEVNAME);
strcat(name,__DEVSTR1);
pci_vhdl = hwgraph_path_to_vertex(name);
scsi_ctlr_nums_add(pci_vhdl);
/* Unref the pci_vhdl due to the reference by hwgraph_path_to_vertex
*/
hwgraph_vertex_unref(pci_vhdl);
vertex_to_name(console_vhdl, name, MAXDEVNAME);
strcat(name, __DEVSTR4);
enet_vhdl = hwgraph_path_to_vertex(name);
/* Useful for setting up the system critical graph */
baseio_enet_vhdl = enet_vhdl;
device_controller_num_set(enet_vhdl, 0);
/* Unref the enet_vhdl due to the reference by hwgraph_path_to_vertex
*/
hwgraph_vertex_unref(enet_vhdl);
}
/* #endif */
void
sn00_rrb_alloc(devfs_handle_t vhdl, int *vendor_list)
{
/* REFERENCED */
int rtn_val;
/*
** sn00 population: errb orrb
** 0- ql 3+?
** 1- ql 2
** 2- ioc3 ethernet 2+?
** 3- ioc3 secondary 1
** 4- 0
** 5- PCI slot
** 6- PCI slot
** 7- PCI slot
*/
/* The following code implements this heuristic for getting
* maximum usage out of the rrbs
*
* constraints:
* 8 bit ql1 needs 1+1
* ql0 or ql5,6,7 wants 1+2
* ethernet wants 2 or more
*
* rules for even rrbs:
* if nothing in slot 6
* 4 rrbs to 0 and 2 (0xc8889999)
* else
* 3 2 3 to slots 0 2 6 (0xc8899bbb)
*
* rules for odd rrbs
* if nothing in slot 5 or 7 (0xc8889999)
* 4 rrbs to 1 and 3
* else if 1 thing in 5 or 7 (0xc8899aaa) or (0xc8899bbb)
* 3 2 3 to slots 1 3 5|7
* else
* 2 1 3 2 to slots 1 3 5 7 (note: if there's a ql card in 7 this
* (0xc89aaabb) may short what it wants therefore the
* rule should be to plug pci slots in order)
*/
if (vendor_list[6] != PCIIO_VENDOR_ID_NONE) {
/* something in slot 6 */
rtn_val = pcibr_alloc_all_rrbs(vhdl, 0, 3,1, 2,0, 0,0, 3,0);
}
else {
rtn_val = pcibr_alloc_all_rrbs(vhdl, 0, 4,1, 4,0, 0,0, 0,0);
}
if (rtn_val)
printk(KERN_WARNING "sn00_rrb_alloc: pcibr_alloc_all_rrbs failed");
if ((vendor_list[5] != PCIIO_VENDOR_ID_NONE) &&
(vendor_list[7] != PCIIO_VENDOR_ID_NONE)) {
/* soemthing in slot 5 and 7 */
rtn_val = pcibr_alloc_all_rrbs(vhdl, 1, 2,1, 1,0, 3,0, 2,0);
}
else if (vendor_list[5] != PCIIO_VENDOR_ID_NONE) {
/* soemthing in slot 5 but not 7 */
rtn_val = pcibr_alloc_all_rrbs(vhdl, 1, 3,1, 2,0, 3,0, 0,0);
}
else if (vendor_list[7] != PCIIO_VENDOR_ID_NONE) {
/* soemthing in slot 7 but not 5 */
rtn_val = pcibr_alloc_all_rrbs(vhdl, 1, 3,1, 2,0, 0,0, 3,0);
}
else {
/* nothing in slot 5 or 7 */
rtn_val = pcibr_alloc_all_rrbs(vhdl, 1, 4,1, 4,0, 0,0, 0,0);
}
if (rtn_val)
printk(KERN_WARNING "sn00_rrb_alloc: pcibr_alloc_all_rrbs failed");
}
/*
* Initialize all I/O devices. Starting closest to nodes, probe and
* initialize outward.
*/
void
init_all_devices(void)
{
/* Governor on init threads..bump up when safe
* (beware many devfs races)
*/
#ifdef LATER
int io_init_node_threads = 2;
#endif
cnodeid_t cnodeid, active;
#ifdef LINUX_KERNEL_THREADS
sema_init(&io_init_sema, 0);
#endif
active = 0;
for (cnodeid = 0; cnodeid < numnodes; cnodeid++) {
#ifdef LINUX_KERNEL_THREADS
char thread_name[16];
extern int io_init_pri;
/*
* Spawn a service thread for each node to initialize all
* I/O on that node. Each thread attempts to bind itself
* to the node whose I/O it's initializing.
*/
sprintf(thread_name, "IO_init[%d]", cnodeid);
(void)sthread_create(thread_name, 0, IOINIT_STKSZ, 0,
io_init_pri, KT_PS, (st_func_t *)io_init_node,
(void *)(long)cnodeid, 0, 0, 0);
#else
DBG("init_all_devices: Calling io_init_node() for cnode %d\n", cnodeid);
io_init_node(cnodeid);
DBG("init_all_devices: Done io_init_node() for cnode %d\n", cnodeid);
#endif /* LINUX_KERNEL_THREADS */
#ifdef LINUX_KERNEL_THREADS
/* Limit how many nodes go at once, to not overload hwgraph */
/* TBD: Should timeout */
DBG("started thread for cnode %d\n", cnodeid);
active++;
if (io_init_node_threads &&
active >= io_init_node_threads) {
down(&io_init_sema);
active--;
}
#endif /* LINUX_KERNEL_THREADS */
}
#ifdef LINUX_KERNEL_THREADS
/* Wait until all IO_init threads are done */
while (active > 0) {
#ifdef AA_DEBUG
DBG("waiting, %d still active\n", active);
#endif
down(&io_init_sema);
active--;
}
#endif /* LINUX_KERNEL_THREADS */
for (cnodeid = 0; cnodeid < numnodes; cnodeid++)
/*
* Update information generated by IO init.
*/
update_node_information(cnodeid);
baseio_ctlr_num_set();
/* Setup the system critical graph (which is a subgraph of the
* main hwgraph). This information is useful during io error
* handling.
*/
sys_critical_graph_init();
#if HWG_PRINT
hwgraph_print();
#endif
}
#define toint(x) ((int)(x) - (int)('0'))
void
devnamefromarcs(char *devnm)
{
int val;
char tmpnm[MAXDEVNAME];
char *tmp1, *tmp2;
val = strncmp(devnm, "dks", 3);
if (val != 0)
return;
tmp1 = devnm + 3;
if (!isdigit(*tmp1))
return;
val = 0;
while (isdigit(*tmp1)) {
val = 10*val+toint(*tmp1);
tmp1++;
}
if(*tmp1 != 'd')
return;
else
tmp1++;
if ((val < 0) || (val >= NUM_BASE_IO_SCSI_CTLR)) {
int i;
int viable_found = 0;
DBG("Only controller numbers 0..%d are supported for\n", NUM_BASE_IO_SCSI_CTLR-1);
DBG("prom \"root\" variables of the form dksXdXsX.\n");
DBG("To use another disk you must use the full hardware graph path\n\n");
DBG("Possible controller numbers for use in 'dksXdXsX' on this system: ");
for (i=0; i<NUM_BASE_IO_SCSI_CTLR; i++) {
if (base_io_scsi_ctlr_vhdl[i] != GRAPH_VERTEX_NONE) {
DBG("%d ", i);
viable_found=1;
}
}
if (viable_found)
DBG("\n");
else
DBG("none found!\n");
#ifdef LATER
if (kdebug)
debug("ring");
#endif
DELAY(15000000);
//prom_reboot();
panic("FIXME: devnamefromarcs: should call prom_reboot here.\n");
/* NOTREACHED */
}
ASSERT(base_io_scsi_ctlr_vhdl[val] != GRAPH_VERTEX_NONE);
vertex_to_name(base_io_scsi_ctlr_vhdl[val],
tmpnm,
MAXDEVNAME);
tmp2 = tmpnm + strlen(tmpnm);
strcpy(tmp2, __DEVSTR2);
tmp2 += strlen(__DEVSTR2);
while (*tmp1 != 's') {
if((*tmp2++ = *tmp1++) == '\0')
return;
}
tmp1++;
strcpy(tmp2, __DEVSTR3);
tmp2 += strlen(__DEVSTR3);
while ( (*tmp2++ = *tmp1++) )
;
tmp2--;
*tmp2++ = '/';
strcpy(tmp2, EDGE_LBL_BLOCK);
strcpy(devnm,tmpnm);
}
static
struct io_brick_map_s io_brick_tab[] = {
/* Ibrick widget number to PCI bus number map */
{
'I', /* Ibrick type */
/* PCI Bus # Widget # */
{ 0, 0, 0, 0, 0, 0, 0, 0, /* 0x0 - 0x7 */
0, /* 0x8 */
0, /* 0x9 */
0, 0, /* 0xa - 0xb */
0, /* 0xc */
0, /* 0xd */
2, /* 0xe */
1 /* 0xf */
}
},
/* Pbrick widget number to PCI bus number map */
{
'P', /* Pbrick type */
/* PCI Bus # Widget # */
{ 0, 0, 0, 0, 0, 0, 0, 0, /* 0x0 - 0x7 */
2, /* 0x8 */
1, /* 0x9 */
0, 0, /* 0xa - 0xb */
5, /* 0xc */
6, /* 0xd */
4, /* 0xe */
3 /* 0xf */
}
},
/* Xbrick widget to XIO slot map */
{
'X', /* Xbrick type */
/* XIO Slot # Widget # */
{ 0, 0, 0, 0, 0, 0, 0, 0, /* 0x0 - 0x7 */
1, /* 0x8 */
2, /* 0x9 */
0, 0, /* 0xa - 0xb */
3, /* 0xc */
4, /* 0xd */
0, /* 0xe */
0 /* 0xf */
}
}
};
/*
* Use the brick's type to map a widget number to a meaningful int
*/
int
io_brick_map_widget(char brick_type, int widget_num)
{
int num_bricks, i;
/* Calculate number of bricks in table */
num_bricks = sizeof(io_brick_tab)/sizeof(io_brick_tab[0]);
/* Look for brick prefix in table */
for (i = 0; i < num_bricks; i++) {
if (brick_type == io_brick_tab[i].ibm_type)
return(io_brick_tab[i].ibm_map_wid[widget_num]);
}
return 0;
}
/*
* Use the device's vertex to map the device's widget to a meaningful int
*/
int
io_path_map_widget(devfs_handle_t vertex)
{
char hw_path_name[MAXDEVNAME];
char *wp, *bp, *sp = NULL;
int widget_num;
long atoi(char *);
int hwgraph_vertex_name_get(devfs_handle_t vhdl, char *buf, uint buflen);
/* Get the full path name of the vertex */
if (GRAPH_SUCCESS != hwgraph_vertex_name_get(vertex, hw_path_name,
MAXDEVNAME))
return 0;
/* Find the widget number in the path name */
wp = strstr(hw_path_name, "/"EDGE_LBL_XTALK"/");
if (wp == NULL)
return 0;
widget_num = atoi(wp+7);
if (widget_num < XBOW_PORT_8 || widget_num > XBOW_PORT_F)
return 0;
/* Find "brick" in the path name */
bp = strstr(hw_path_name, "brick");
if (bp == NULL)
return 0;
/* Find preceding slash */
sp = bp;
while (sp > hw_path_name) {
sp--;
if (*sp == '/')
break;
}
/* Invalid if no preceding slash */
if (!sp)
return 0;
/* Bump slash pointer to "brick" prefix */
sp++;
/*
* Verify "brick" prefix length; valid exaples:
* 'I' from "/Ibrick"
* 'P' from "/Pbrick"
* 'X' from "/Xbrick"
*/
if ((bp - sp) != 1)
return 0;
return (io_brick_map_widget(*sp, widget_num));
}